Marine Pumps and Plumbing Section
-
Upload
sam-allen-wholesale -
Category
Documents
-
view
271 -
download
2
description
Transcript of Marine Pumps and Plumbing Section
Sam Allen WholesaleMarine, Outdoor Leisure & Industrial Accessories
www.samallen.com.au
Pumps &
Plumbing
www.samallen.com.au
286www.samallen.com.auwww.samallen.com.au
Pumps & Plumbing
ContentsSaltwater Deck Wash Pump Systems 289
Deck Wash Pump Kits . . . . . . . . . .290Deck Wash Pumps . . . . . . . . . . . .291Deck Wash Pump Accessories . . . . . . . .292
Live Bait Pump Systems 293Live Bait Pump Kits . . . . . . . . . 293 - 294Live Bait Pumps . . . . . . . . . . . . .295Live Bait Pump Accessories . . . . . . . . .296
Fresh Water Pump Systems 297Fresh Water Pumps & Kits . . . . . . . . .297Fresh Water Pumps . . . . . . . . . . .298
Pump Spare Parts 299Water System Accessories 300Pump Systems 301
In-line, Caravan, Impeller & Gear pumps . . . .301Bilge Pump - Manual 302
Manual Bilge Pumps . . . . . . . . . 302 - 305Manual Bilge Pump Spares & Accessories . . . .306
General Purpose Pump Systems 307Non-return Valves . . . . . . . . . . . .307Pick-Up, Kayak & Drill Pump . . . . . . . .308
Bilge Pump Systems 309Bilge Pumps . . . . . . . . . . . . . .309Bilge Pumps & Float Switches . . . . . . . .310Bilge Pump Strainers . . . . . . . . . . .311
Blowers 311In Line Blowers . . . . . . . . . . . 311 - 312Flange Mount Blowers . . . . . . . . . .312
Marine Toilets 313Electric Toilets . . . . . . . . . . . 313 - 315Electric Toilet Spares . . . . . . . . . . .316Hydro Vacuum Toilets . . . . . . . . . .317Electric Toilets . . . . . . . . . . . . .318Toilet Spares & Accessories . . . . . . . . .319Toilet Accessories . . . . . . . . . . . .320Waste Tanks . . . . . . . . . . . . 321 - 322Toilet Accessories . . . . . . . . . . . .323Waste Tank Sensor Systems . . . . . . . .324Macerator Pumps . . . . . . . . . . . .325Diaphragm Pump . . . . . . . . . . . .326Vented Loops . . . . . . . . . . . . .327Seacocks . . . . . . . . . . . . . . .328
Bathroom, Shower & Laundry Fittings 329Stainless Steel Bathroom Accessories . . . 329 - 330Showers . . . . . . . . . . . . . 331 - 332Bathroom & Laundry Fittings . . . . . . 333 - 334Bathroom Accessories . . . . . . . . . .334
Faucets & Water Filters 335Faucets . . . . . . . . . . . . . 335 - 336Water Filters . . . . . . . . . . . . . .337Fresh Water Tanks . . . . . . . . . . . .338
Water Tanks 338Sinks & Sink Wastes 339
Sinks . . . . . . . . . . . . . . 339 - 340Sink Wastes . . . . . . . . . . . . . .340
Hoses 341General Purpose & Washdown Hoses . . . . .341Drinking Water Hoses . . . . . . . . . .342Grey Water & Bilge Pump Hose . . . . . . .343Sanitation Hose . . . . . . . . . . . . .344Eco Hoses, Ventilation Hose & Quick Connect Hose .345Universal Joiner . . . . . . . . . . . .346Quick Connect Fittings . . . . . . . . . .346
Plumbing Fittings 346Skin Fittings . . . . . . . . . . . . 347 - 349Thru-hull Pickups . . . . . . . . . . . .349Valves . . . . . . . . . . . . . . 350 - 353Connectors . . . . . . . . . . . . 353 - 363End Caps & Fittings . . . . . . . . . . .364Hose Clamps . . . . . . . . . . . . 365 - 366
Water Heaters & Accessories 367Water Heaters . . . . . . . . . . . 367 - 368Water Heater Accessories . . . . . . . . .368
Scoops & Strainers 369Scoops . . . . . . . . . . . . . . . .369Strainers . . . . . . . . . . . . . 370 - 371
Salt Water Deck Wash Pumps
Grey Water Pumps
Livebait Aerator Pumps
Freshwater Pumps
Manual Bilge Pumps
Bilge Pumps
Float Switches
Bilge Blowers
Toilets
Waste Tanks and Sanitation Sachets
Macerator Pumps
Vented Loops
Seacocks
Shower, Bathroom and Laundry Fittings
Sinks and Sink Wastes
Faucets and Manual Galley Pumps
Water Purifiers / Filters
Water Tanks
Hose
Plumbing Fittings
Strainers
Boat Boilers/Water Heater
Accumulator Tank
Aerator Head
Salt Water Deck Wash Pumps
Grey Water Pumps
Livebait Aerator Pumps
Freshwater Pumps
Manual Bilge Pumps
Bilge Pumps
Float Switches
Bilge Blowers
Toilets
Waste Tanks and Sanitation Sachets
Macerator Pumps
Vented Loops
Seacocks
Shower, Bathroom and Laundry Fittings
Sinks and Sink Wastes
Faucets and Manual Galley Pumps
Water Purifiers / Filters
Water Tanks
Hose
Plumbing Fittings
Strainers
Boat Boilers/Water Heater
Accumulator Tank
Aerator Head
www.samallen.com.au289
Pumps &
Plumbing
Saltwater Deck Wash Pump SystemsDeck Wash Pump Kits
Deck Wash System
SHURflo® Deluxe ProBlaster™ Washdown Kit
2
3
4
5
6
7
8
9
1
10
Deck Wash System
Spray Nozzle
Hose Coil
Stainless Steel flush link
Stainless Steel Hose Tail - 3/4" BSP
Pro Blaster™ Pump
1
2
3
4
5
Fittings
Strainer
1/2" BSPM x 3/4" ID ST
20mm compact PVC ball valve
3/4" BSP hi-speed NYLON pick up or BRONZE thru-hull pick up
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
23953
23873
45630 45600
45181
23040 or 23038
Part No. Description
239306 SHURflo® Deluxe ProBlaster™ Washdown Kit with NYLON Pick Up
• Washdown Kit includes everything you need for tough wash down applications all in one box.
• CE Certified, Ignition Protected ISO 8846.• SHURflo® ProBlaster™ pump includes a 3 Year Warranty.
Kit Includes:• 1 X 23953 ProBlaster™ Washdown Kit - 12V (15.1 LPM) (Ref fig: 1, 2, 5, 6, 7)• 1 X 45630 Stainless steel hose tail - 3/4" BSP (Ref fig: 4)• 1 X 23873 Stainless steel flush link for deck wash (Ref fig:3)• 1 X 45600 1/2" BSPM X 3/4" ID ST (Ref fig: 8)• 1 X 45181 20mm compact PVC ball valve (Ref Fig: 9)• 1 X 23040 Nylon hi-speed thru-hull pickup - 3/4" BSP (Ref fig: 10)
Part No. Description
239306B SHURflo® Deluxe ProBlaster™ Washdown Kit with BRONZE Thru-hull Pick Up
• Washdown Kit includes everything you need for tough wash down applications all in one box.
• CE Certified, Ignition Protected ISO 8846.• SHURflo® ProBlaster™ pump includes a 3 Year Warranty.
Kit Includes:• 1 X 23953 ProBlaster™ Washdown Kit - 12V (15.1 LPM) (Ref fig: 1, 2, 5, 6, 7)• 1 X 45630 Stainless steel hose tail 3/4" BSP (Ref fig: 4)• 1 X 23873 Stainless steel flush link for deck wash (Ref fig: 3)• 1 X 45600 1/2 BSPM X 3/4" ID ST (Ref fig: 8)• 1 X 45181 20mm compact PVC ball valve (Ref fig: 9)• 1 X 23038 Bronze thru-hull pickup - 3/4" BSP (Ref fig: 10)
NOTE: Please refer to hose section for hose types and lengths.
Refer to diagram "Deck Wash System"
Premium
Great Value
www.samallen.com.au290
Pum
ps &
Plu
mbi
ng
Deck Wash Pump KitsSHURflo® Pro Deck Washdown Kit
1
2
3
5
67
8
2395323873 45600
Part No. Description
239308 SHURflo® Pro Deck Washdown Kit - 12V
• Washdown Kit includes flush link and fitting for tough wash down applications.• CE Certified, Ignition Protected ISO 8846.• SHURflo® ProBlaster™ pump includes a 3 Year Warranty.
Kit Includes:• 1 X 23953 ProBlaster™ Washdown Kit - 12V (15.1 LPM) (Ref fig: 1, 2, 5, 6, 7)• 1 X 23873 Stainless steel flush link for deck wash (Ref fig: 3)• 1 X 45600 1/2" BSPM X 3/4" ID ST (Ref fig: 8)
NOTE: Please refer to hose section for hose types and lengths.
Refer to diagram "Deck Wash System"
Bronze Through-Hull Kit
Part No. Description
239312 Bronze Through-Hull Kit
• Designed by Sam Allen Wholesale to keep your live bait kicking well with this specially pick up system.
• This high speed deck wash/live bait pick up system has been specially designed to allow pressurised water flow at both high and low speeds.
Kit Includes:• 1 X 23038 Bronze thru-hull pickup - 3/4" BSP.• 1 X 45181 20mm compact PVC ball valve.
4
5
Refer to diagram "Thru-hull Pickup & Ball Valve Diagram"
Great Value
12
5
6
7
SHURflo® Economy ProBlaster™ II Washdown Kits
Part No. Volt(VDC)
Amp(A) Flow Rate Shut-Off
Pressure Dimensions (mm)
239412 12VDC 10A 15.1 LPM (4.0 GPM) 60 PSI 254 x 127 x 120
239414 12VDC 14A 18.9 LPM (5.0 GPM) 60 PSI 254 x 127 x 120
• SHURflo’s new Washdown Kit II is available in both Deluxe 4.0 and Ultimate 5.0 Series. The perfect starter kit for tough wash down applications all in one box. For all tough applications from cleaning your fish box, anchor chain cleaning or blasting down the grimiest of decks all in one kit.
• Supplied in Retail Packaging.• CE Certified, Ignition Protected ISO 8846.• 2 Year Warranty.
Kit Includes: • 239412 ProBlaster™ Washdown Kit II Deluxe 4.0 pump, fittings, nozzle, raw
water strainer and a 3/8” x 7.6m self-coiling hose. (Ref fig: 1, 2, 5, 6, 7)• 239414 ProBlaster™ Washdown Kit II Ultimate 5.0 pump, fittings, nozzle, raw
water strainer and a 1/2” x 7.6m self-coiling hose. (Ref fig: 1, 2, 5, 6, 7)
NOTE: Please refer to hose section for hose types and lengths.
Refer to diagram "Deck Wash System"
Great Value
Hull
Pickup
Valve
Water flow
Thru-Hull Pickup & Ball Valve Diagram
www.samallen.com.au291
Pumps &
Plumbing
Part No. Volt(VDC)
Amp(A) Flow Rate Shut-Off
Pressure Dimensions (mm)
23940 12VDC 6A 13.2 LPM (3.5 GPM) 45 PSI 203 x 127 x 118
23941 12VDC 6A 13.2 LPM (3.5 GPM) 45 PSI 203 x 127 x 118
23942 24VDC 3A 13.2 LPM (3.5 GPM) 45 PSI 203 x 127 x 118
• Perfect for tough wash down applications, such as fish box, scaling, and anchor chain cleaning.
• These rugged self-priming pumps deliver high lift, can run dry without damage, and won’t overheat with extended use.
• Thermally Protected, CE Certified, Ignition Protected ISO 8846.• 1 Year Warranty.
NOTE: The 23941 is supplied in Retail Packaging . Includes hose nozzle and tail fittings.
Deck Wash Hose and Nozzle Kits
SHURflo® ProBlaster™ II Washdown Pump
SHURflo® Blaster™ Washdown Pumps
Part No. Volt(VDC)
Amp(A) Flow Rate Shut-Off
Pressure Dimensions (mm)
239404 12VDC 14A 18.9 LPM (5.0 GPM) 60 PSI 254 x 127 x 120
• The SHURflo® ProBlaster™ II delivers over 18.9 litres per minute and pressure up to 60 psi, giving you the ultimate in wash down capabilities.
• This high volume pump will clean your deck quickly and easily.• The corrosion resistant electro-coated motor, O-ring seal, fully sealed wire
entries offer the perfect solution for the harsh marine environment. • Can run dry without damage.• Inlet strainer, 1/2" hose barb fittings and nozzle included.• Thermally Protected, CE Certified, Ignition Protected ISO 8846.• 2 Year Warranty.
High Flow
Part No. Description Hose Length
23750 Black Deck Wash Hose and Nozzle Kit 7.6m
23751 White Deck Wash Hose and Nozzle Kit 7.6m
23754 Blue Deck Wash Hose and Nozzle Kit 7.6m
23752 Black Deck Wash Hose and Nozzle Kit 15m
23756 Blue Deck Wash Hose and Nozzle Kit 15m
23954 Spare Hose Nozzle
• Designed to clean delicate and hard to reach areas on boats and RVs. • Five colour coded levels allow user to choose the correct flow pattern for the
targeted area. • The coiled hose kits can be stored neatly in compact areas. • Advanced designed coils are kink resistant, strong and durable and will maintain
their coiled shape, even when stretched to their maximum length.• The kit includes a quick connect hose fittings, gauze filter, are UV resistant,
colour coded for easy use and made of NSF certified material.• Used with BSP connectors.• Tested up to 300psi.• 1 Year Warranty.
Deck Wash Pumps
5 Spray Settings
www.samallen.com.au292
Pum
ps &
Plu
mbi
ng
SHURflo® Hose Nozzle and Coil Hose
Part No. Description
23952 SHURflo® Blaster™ Nozzle
23748 7.6m White Coil Hose Blister - NPT Connection
• The Blaster™ Nozzle has a lock clip for continuous water flow and a smooth comfortable handle for easy handling.
• High grade seals and stainless steel spring.• Noncorrosive and high-impact construction for long life.• Fully adjustable spray from fine mist to full stream.
Deck Wash Pump Accessories
Stainless Steel Quick Connect Deck Wash Outlets
Osculati® Multipurpose Recessed Pressure wash Outlet
Part No. Description Inlet Outlet
23874 Quick Connect Deck Mount & Hose Connect - BSP
3/4” BSP Female
- Bayonet connector
23875 Spare Hose Connector suits 23874 + Bayonet connector
3/4” BSP Male
23873 Quick Connect Deck Mount & Hose Connect - NPT
3/4” NPT Female
- Bayonet connector
23877 Spare 130° Angle Hose Connector suits 23873
+ Bayonet connector
3/4” NPT Male
• Styled much like a deck filler, these heavy duty quick connectors are made from cast stainless steel and are clearly labelled "WASHDOWN".
• The deck mount includes its own stop valve to shut the water off when the hose adaptor is removed.
• The hose adaptor simply twist locks into the deck receptacle and the double 'O'rings assure a positive seal.
• A non-return valve located in the hose adaptor prevents water from spraying out of the hose when the adaptor is removed from the deck fitting.
• 1 Year Warranty.
Part No. Description
23872 Recessed Pressure wash Outlet suitable for Washing Decks
• For connection into the on board water system (fresh water) or to the wash down pump (salt water), it keeps the line under pressure; the washing hose is snapped-in onto the intake and activates the pump automatically.
• UV resistant ABS box with chrome brass mechanism.• Snap on garden hose fitting / 1/2" BSP.
23874
23873
Specifications
Diameter Recess Depth Recess Cutout Screw
Ø 100mm 50mm Ø 66mm Ø 5mm
23877
23875
Part No. Description
23878 316G Stainless Steel Water Inlet
• 1/2" BSP thread at the back and a 3/4" NPT female thread on the inlet.
Stainless Steel Water Inlet
www.samallen.com.au293
Pumps &
Plumbing
Live Bait & Deck Wash System
SHURflo® Piranha™ Livewell Pump - Dual Port Kits
Part No. Description
239304 SHURflo® Piranha™ Livewell Pump Kit with Nylon Through-Hull Pickup
• 12VDC Live Bait tank water circulation pump with dual port fitting allows for easy wash down pump connections.
• CE Certified, Ignition Protected ISO 8846.• SHURflo® Piranha™ livewell pump includes a 2 Year Warranty.
Kit Includes:• 1 x 23035 Piranha™ Livewell Pump dual port - 12V (2)• 1 X 45181 20mm compact PVC ball valve (4)• 1 X 45600 1/2" BSPM x 3/4" ID ST (3)• 1 X 23036 White 90 degree aerator head - 3/4" (1)• 1 X 23040 Nylon hi-speed through-hull pickup - 3/4" BSP (5)
Part No. Description
239304B SHURflo® Piranha™ Livewell Pump Kit with Bronze Through-Hull Pickup
• 12VDC Live Bait tank water circulation pump with dual port fitting allows for easy wash down pump connections.
• CE Certified, Ignition Protected ISO 8846.• SHURflo® Piranha™ livewell pump includes a 2 Year Warranty.
Kit Includes:• 1 x 23035 Piranha™ Livewell Pump dual port - 12V (2)• 1 X 45181 20mm compact PVC ball valve (4)• 1 X 45600 1/2" BSPM x 3/4" ID ST (3)• 1 X 23036 White 90 degree aerator head - 3/4" (1)• 1 X 23038 Bronze through-hull pickup - 3/4" BSP (5)
Note: Please refer to hose section for hose types and lengths.
2
3
4
5
1
Live Bait and Deck Wash System
3/4” White 90 degree aerator head
Piranha™ Livewell Pump Dual Port
1/2 BSPM x 3/4” ID ST
1
2
3
PVC ball valve 3/4 BSP
Nylon or bronze through-hull pick up
4
5
Live Bait Pump SystemsLive Bait Pump Kits
12
3
4 5
Refer to diagram "Live Bait and Deck Wash System"
23035
45181
45600
23036
23040 or 23038
234mm
97mm 74mm
Premium
Great Value
www.samallen.com.au294
Pum
ps &
Plu
mbi
ng
SHURflo® Piranha™ Livewell Pump - Dual Port Kit
1
2
3
Part No. Description
239310 SHURflo® Piranha™ Dual Port Live Bait Kit - 12V
• 12VDC Live Bait tank water circulation pump with dual port fitting allows for easy wash down pump connections.
• CE Certified, Ignition Protected ISO 8846.• SHURflo® Piranha™ livewell pump includes a 2 Year Warranty.
Kit Includes:• 1 X 23035 Livewell Piranha Dual Port 12VDC (2)• 1 X 23036 White 90° Aerator Head 3/4" (1)• 1 X 45600 1/2" BSPM X 3/4" ID ST (3)
NOTE: Please refer to hose section for hose types and lengths.
Part No. Volt(VDC)
Amp(A) Flow Rate Port Size
Inlet/Outlet (in) Dimensions (mm)
23035 12VDC 2A 2270 LPM (600 GPH) 3/4” (19mm) 241 x 95
• 12VDC Live Bait tanks water circulation pump.• High density nylon housing and heavy duty water cooled motor give the
SHURflo® Livewell Pumps unparalleled reliability. • Patented anti-airlock feature allows the pump to clear trapped air in rough
water or when the boat is anchored. • The dual port fitting allows for easy wash down connections. • Piranha Series Livewell Pumps have a removable cartridge for easy cleaning.• Includes Tinned 6’ Wire assembly, hex nut & washer.• CE Certified, Ignition Protected ISO 8846.• 2 Year Warranty.
SHURflo® Piranha™ Livewell Pump - Dual Port Kit
Refer to diagram "Live Bait and Deck Wash System"
Refer to diagram "Live Bait and Deck Wash System"
Live Bait Pump Kits
23035
45600
23036
SHURflo® Piranha™ Angled Port Aerator Pumps
Part No. Volt(VDC)
Amp(A) Flow Rate Port Size
Inlet/Outlet (in) Dimensions (mm)
23031 12VDC 2A 2270 LPM (600 GPH) 3/4" NPT - 3/4" Barb 178 x 191
23029 12VDC 4.5A 3027 LPM (800 GPH) 3/4" NPT - 3/4" Barb 178 x 191
23041 Replacement Motor Cartridge suits Piranha 800Gph 23029
• High density nylon housing and heavy duty water cooled motor give the SHURflo® Livewell Pumps unparalleled reliability.
• Patented anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is anchored.
• The dual port fitting allows for easy wash down connections. • These aerator pumps have a removable cartridge for easy cleaning.• Includes Tinned 6’ Wire assembly, hex nut & washer.• CE Certified, Ignition Protected ISO 8846.• 2 Year Warranty.
Great Value
Great Value
Great Value
www.samallen.com.au295
Pumps &
Plumbing
SHURflo® Bait Sentry™ Magnetic Drive Livewell Pumps
SHURflo® PRO Baitmaster™ Heavy Duty Livewell Pumps
Part No. Volt(VDC)
Amp(A)
Suits Tank Size (ltr) GPM LPM Port Size
Inlet/Outlet (in) Dimensions (mm)
23943 12VDC 9A < 135L 4 15.1 1/2" NPT 235 x 136 x 127
23944 24VDC 5A < 135L 4 15.1 1/2" NPT 235 x 136 x 127
• The Pro Baitmaster™ is excellent for livewell or wash down applications in harsh marine environments.
• The SHURCote II seamless motor shell and sealed switch protects the pump from splashed liquids.
• Self-priming and can run dry without damage. • 45 PSI shut off pressure.• Continuous duty rated.• CE Certified, Ignition and Thermally protected 8846.• 2 Year Warranty.
Part No. Volt(VDC)
Amp(A) Tank Size Port Size Inlet/Outlet/Wash
Down Port Outlet (in) Dimensions (mm)
23945 12VDC 5A 3027 LPM (800 GPH)
3/4”NPT-M - 3/4”Barb - 1/2” NPT-F 125 x 200
23946 12VDC 6A 3785 LPM(1000 GPH)
3/4”NPT-M - 1-1/8”Barb - 1/2” NPT-F 125 x 200
• The Bait Sentry™ Livewell Pumps are designed for easy installation and trouble-free operation.
• Magnetic Drive technology eliminates unnecessary failures. • Motors keep running after ingesting debris or even when running dry. • Patented anti-airlock feature allows the pump to clear trapped air in rough
water or when the boat is anchored. • The dual port inlet fitting allows for easy wash down connections. • Includes Tinned 6’ Wire assembly.• CE Certified, Ignition Protected ISO 8846.• 3 Year Warranty.
Live Bait Pumps
Bronze Through-Hull Kit
Part No. Description
239312 Bronze Thru-hull Kit
Kit Includes:• 1 X 23038 Bronze thru-hull pickup - 3/4" BSP• 1 X 45181 20mm compact PVC ball valve
4
5
Refer to diagram "Live Bait and Deck Wash System"
23038
45181
Part No. Description
23034 Livewell Fill Valve Full Port - 3/4” Hose
SHURflo® Livewell Fill Valve Full Port
Premium
Premium
www.samallen.com.au296
Pum
ps &
Plu
mbi
ng
Part No. Description
23036 Plastic 90 Degree Aerator Head - 3/4” Hose
• Fully adjustable aerator head has been especially designed for the user to customised water flow to suit their live bait tank.
• Easy installation.• Hole cut out - 1 1/16 inch (26-27mm).
90 Degree Aerator Head
Part No. Description
23041 Replacement Motor Cartridge suits Piranha 800Gph 23029 - 12 Volt
SHURflo® Piranha Replacement Motor Cartridge
Live Bait Pump Accessories
Part No. Description
23968 Quick Connect 1/2" Barb Straight
23969 Quick Connect 1/2" Barb Elbow
23970 Quick Connect 3/4" Barb Straight
23971 Quick Connect 3/4" Barb Elbow
23972 Quick Connect Straight Coupler
23973 Quick Connect 1/2" NPT (M) Straight
Part No. Description
23962 Wingnut Swivel Adaptor
23963 1/2"NPT - 1/2" Strait Tail
23964 1/2"NPT - 3/4" Strait Tail
23966 1/2"NPT - 1/2"Elbow Tail
23967 1/2"NPT - 3/4" Elbow Tail
SHURflo® Quick Connect Fittings
SHURflo® Hose Fittings
23968 23969
23970 23971
23972 23973
23962 23963 & 23964 23966 & 23967
www.samallen.com.au297
Pumps &
Plumbing
SHURflo® Aqua King™ 60 Litre Flexible Tank Freshwater Kit
SHURflo® Aqua King™ 39 Litre Rigid Tank Freshwater Kit
SHURflo® SLV Pump
Part No. Volt(VDC)
Amp(A) Flow Rate Shut-Off
PressureDimensions
(mm)
239424 12VDC 2.5A 3.8 LPM (1.0 GPM) 30 PSI 170 x 100 x 60
• This compact automatic demand pump offers durability and dependability making it ideal for low volume, intermittent duty applications.
• The SLV Pump self-primes up to 2.5 vertical feet (0.7m) while delivering over 3.8 LPM (1.0 GPM).
• Low power consumption motor, provides high pump performance and reliability.• Ports: 3/8" Barb.• Thermally Protected, CE Certified, Ignition Protected ISO 8846.• 2 Year Warranty.
Part No. Description
239300 Aqua King™ 60 Litre Flexible Tank Freshwater Kit - 12 Volt
Kit Includes:• 23934 - SHURflo® 12 Volt Aqua King Standard Pump - 11 LPM x 1.• 23966 - SHURflo® 1/2 - 1/2 Elbow Tail x 1.• 23963 - SHURflo® 1/2 - 1/2 Straight Tail x 1.• 51067 - Flush Mounting Container for Hand Shower x 1.• 51010 - Shower Head Only x 1.• 51008 - 2.5m Shower Hose - 1/2 BSB x 1.• 50800 - Flexible Square Water Tank - 60 Litre x 1.• 29660 - 38mm Nylon Filler - Water x 1.• 45361 - 1/2 BSB Straight Tail x 1.• 45276 - 3/8 and 12mm Fitting Kit for Water Tank x 1.• MAH005 - 7mm - 17mm Stainless Steel Hose Clamp x 5.• HAS024 - 27mm - 51mm Stainless Steel Hose Clamp x 2.
NOTE: Everything included to make a freshwater kit excluding hose . Contact our sales department to discuss special pricing on hose when buying for kits .
Part No. Description
239302 Aqua King™ 39 Litre Rigid Flexible Tank Freshwater Kit - 12 Volt
Kit Includes:• 23933 - SHURflo® 12 Volt Aqua King Junior Pump - 7.6 LPM x 1.• 23966 - SHURflo® 1/2" - 1/2" Elbow Tail x 1.• 23963 - SHURflo® 1/2" - 1/2" Straight Tail x 1.• 45315 - Hose Tail - 12mm x 3/8 BSP x 1.• 45872 - 1 1/2" BSP x 1 1/2" Elbow x 1.• 51074 - Shower Box with Hose & Nozzle x 1.• 31324 - 3/4" Pan Phillips Stainless Steel Screw x 10.• 45282 - 39 Litre Rigid Water Tank x 1.• 45279 - Water Tank Port Hole & Fittings x 1.• 29652 - 316 Stainless Steel Filler - Water - Blue Cap x 1.• MAH005 - 7mm - 17mm Stainless Steel Hose Clamp x 5.• HAS024 - 27mm - 51mm Stainless Steel Hose Clamp x 2.
NOTE: Everything included to make a freshwater kit excluding hose . Contact our sales department to discuss special pricing on hose when buying for kits .
Fresh Water Pump SystemsFresh Water Pumps & Kits
Great Value
Great Value
Great Value
www.samallen.com.au298
Pum
ps &
Plu
mbi
ng
Fresh Water Pumps
SHURflo® Aqua King™ II Fresh Water Pumps
Part No. Volt(VDC)
Amp(A) Flow Rate Shut-Off
Pressure Dimensions (mm)
239400 12VDC 12A 18.9 LPM (5.0 GPM) 55 PSI 254 x 127 x 120
239402 24VDC 5A 18.9 LPM (5.0 GPM) 55 PSI 254 x 127 x 120
• SHURFLO’s AQUA KING™ II Fresh Water Pumps are designed for boats with multi-fixtures providing “Just like home” shower pressure, and can operate at lower flow conditions without cycling.
• A built in mechanical bypass function enables these pumps to vary the flow rate for any on demand condition, without the need for an accumulator.
• With heavy duty motors built to withstand the tough marine environment these motors feature an electro-coated seamless shell motor, O-ring sealed end bells, and complete sealed wire entries on the motor shell and pressure switch.
• Ports: uses SHURflo® Quick Connect Fittings ref to "SHURflo® Quick Connect Fittings" on page 296.
• Thermally Protected, CE Certified, Ignition Protected ISO 8846.• 3 Year Warranty.
SHURflo® Aqua King™ II High Flow Pump Systems
Part No. Volt(VDC)
Amp(A) Flow Rate Shut-Off
Pressure Dimensions (mm)
239416 12VDC 13/11A 37.8 LPM (10 GPM) 55 PSI 610 x 460 x 150
239418 24VDC 7/6A 37.8 LPM (10 GPM) 55 PSI 610 x 460 x 150
• The most advanced systems available. These fully-automatic, quiet units deliver water smoothly and consistently.
• System contains: Aqua King™ II Supreme 5.0 GPM and Pro Blaster™ II Ultimate 5.0 GPM, manifold assembly and mounting board.
• Variable-speed, smooth flow-silent operation.• High-flow capability - 10 GPM (37.8 LPM).• High pressure 55 PSI.• Reduces Fluctuations in water temperature.• Improves performance of showers, heads and sinks.• Wide flow range for single and multiple fixture use.• Eliminates need of an accumulator tank.• Ports: 1/2”-14 NPT.• CE Certified, Ignition Protected ISO 8846.• 3 Year Warranty.
SHURflo® Aqua King™ Fresh Water Pumps
Part No. Volt(VDC)
Amp(A) Flow Rate Shut-Off
PressureDimensions
(mm)
23934 12VDC 5A 11.35 LPM (3.0 GPM) 55 PSI 184 x 127 x 118
23935 24VDC 3A 11.35 LPM (3.0 GPM) 55 PSI 184 x 127 x 118
• The Next Generation SHURflo® pumps guarantee quiet operation and smooth performance while providing the ultimate in durability and reliability.
• Designed and built specifically for the harsh marine environment, SHURflo® pumps are equipped with sealed switches and seamless e-coated motors.
• Multi-fixture marine fresh water installations, this pump may be used for general fresh water transfer, intermittent duty.
• Ports: 1/2”-14 NPT.• Thermally Protected, CE Certified, Ignition Protected ISO 8846.• 3 Year Warranty.
Premium
High Performance
High Performance
www.samallen.com.au299
Pumps &
Plumbing 1
Shurflo Pump Spare Parts
Shurflo Pump Spare Parts
Tips For Installing Shurflo Pumps
recommends at least 1ft. of 1/2 I.D flexible high pressure tubing at both ends.
• Shurflo hex/swivel barb fittings provide easy removal.
• Shurflo fittings are designed with a taper-seal, creating a water tight connection when hand-tightened.
Mounting:• Consider a dry location that allows
easy access if maintenance is required.
• Excessive heat may trigger the integral thermal breaker and interrupt operation, When the temperature drops the pump will start operating again.
• If mounting the pump vertically the pump head should always be positioned downwards. Shurflo
Part No. Description Number
SP-271 Pressure Switch & Housing Assembly T/S 4148 / 4158 Series 1
SP-272 Valve Assembly T/S 4148 / 4158 / 4248 / 4258 Series 2
SP-273 Drive Assembly T/S 4148 / 4158 Series 3
SP-277 Pressure Switch & Housing Assembly T/S 4248 / 4258 / 4648 Series 1
SP-278 Pump Head Assembly T/S 4248 / 4258 / 4648 Series 5
Part No. Description Number
SP-221 Valve pump assembly T/S 2088 series 3
SP-222 Pressure switch & upper housing T/S 2088 series 1 / 2
SP-226 Pump head repair kit T/S 2088 series standard 2
SP-228 Pump head repair kit T/S 2088 2
SP-230 Pressure switch assembly T/S 3901-2901 series 1
SP-232 Upper housing T/S 3901-2901 series 2
SP-234 Valve assembly T/S 3901-2901 series 3
SP-236 Drive & diaphragm assembly T/S 3901-2901 series 1
SP-238 Pressure switch assembly T/S 4901 series 1
Part No. Description Number
SP-240 Upper housing T/S 4901 series 2
SP-242 Valve assembly T/S 4901 series 3
SP-244 Drive & diaphragm assembly T/S 4901 series 4
SP-246 Pressure switch assembly T/S 5901 series 1
SP-248 Upper housing T/S 5901 series 2
SP-250 Valve assembly T/S 5901 series 3
SP-252 Drive & diaphragm assembly T/S 5901 series 4
SP-260 Macerator Impeller Kit
SP-261 Macerator Impeller Housing
Pump Spare Parts
2
3
4
5
2
3
1
4
5*Baseplate shown is for all models except PRO BLASTER™ II 4.0
1
2
3
4
5
www.samallen.com.au300
Pum
ps &
Plu
mbi
ng
Water System Accessories
SHURflo® In-Line Check Valve
SHURflo® Pre-Pressurised Accumulator Tank
SHURflo® Water Intake Fittings with Pressure Reducers
Part No. Description Port Size
23958 In-Line Check Valve 9.1” x 4.8” x 3.8”(232 x 121 x 97mm)
• Allows flow in one direction only to safeguard against back surge up to 100 PSI (6.8 BAR).
• 1 Year Warranty.
Part No. Total Volume Maximum PSI Pre-Charged Dimensions (mm)L x W x H
23959 24 oz.(710 ml)
125 PSI(8.8 BAR)
30 PSI(2.0 BAR) 232 x 121 x 97
• 24 oz (710 ml) nylon tank.• Reduce cycling pulsation and pressure spikes.• Increase the life of your pump.• Save battery power. • Easily handles pressure requirements from 20 PSI to 125 PSI.• 1 Year Warranty.
Part No. Mount Colour
232140 Wall Mount Gel White
232142 Wall Mount Chrome
• Diaphragm design prevents high-pressure damage often caused by city water systems.
• Leak-tight, stress and crack-resistant, these high-performance water entries limit water pressure safely to 125 psi while meeting or surpassing all check valve code requirements.
• Inlet fits standard garden hose male fitting.• Outlet 1/2" NPT fitting (refer to "SHURflo® Hose Fittings" on page
296)
Part No. Description
23870 Recessed Mains Pressure Intake
• Used to reduce water from shore based source to 3 bar (45 PSI) to prevents damage to plumbing
• Chromed brass garden type quick connect fitting• Flush mounting.• Inlet fits standard garden hose female fitting.• Outlet 1/2" NPT fitting (refer to "SHURflo® Hose Fittings" on page
296)
Osculati® Recessed Mains Pressure Intake
Specifications
Diameter Recess Depth Recess Cutout Screw
Ø 100mm 50mm Ø 66mm Ø 5mm
Specifications
Dimensions (H x W) Recess Depth Recess Cutout Screw
117mm x 117mm 120mm Ø 88mm Ø 4mm
www.samallen.com.au301
Pumps &
Plumbing
Pump SystemsIn-line, Caravan, Impeller & Gear pumps
Laguna Gear Pump
Circulation Pumps
Part No. Volts Amps Capacity Dimensions (mm)L x W x H
23210 12V 4A 8 LPM 151 x 78 x 95
• Simple design and easy upkeep.• Can be used with oil and diesel.• Male thread: 3/8" BSP.• 1 Year Warranty.
Part No. Volts Amps Capacity Dimensions (mm)L x W x H
453085 12V 5A 115 LPM 168 x 142 x 110
453086 24V 2.5A 115 LPM 168 x 142 x 110
• A modern circulation pump suitable for fresh water or ethylene glycol circulation.
• Designed for continuos operation.• Equipped with a carbon / viton / sus316 mechanical seal.• Port inlet 1-1/2" barb (38mm) to outlet 1-1/4" barb (32mm).
TMC Inline Pump
Part No. Volt Amp Delivery Head Fuse Size Dimensions (mm)L x W x H
23183 12V 3A 23.1FT 5A 42x40x136
• Designed to be a secondary pump in a large system to keep pressure even throughout the system.
• To be used with fresh water and salt water.• Designed for confined spaces.• Capacity: 280GPH (1060LPH).• 12.7mm Hose Diameter.• 1 Year Warranty.
TMC Caravan Pump
Part No. Volt Amp Delivery Head Dimensions (mm)L x W x H
23184 12V 2A 16FT 40 x 38 x 103
• Designed to be a secondary pump in a large system to keep pressure even throughout the system.
• To be used with fresh water.• Capacity: 100GPH (7.5LPM).• Outlet: 11mm.• Designed for confined spaces.• 1 Year Warranty.
TMC Impeller Pumps
Part No. Volt Amp Suction Height Dimensions (mm)L x W x H
23253 12V 8A 13ft 175 x 120 x 90
23254 24V 4A 13ft 175 x 120 x 90
• Fresh or salt water.• Bronze body.• Capacity: 400GPH (25LPM).• Inlet/Outlet (dual size):
Internal Thread 1/2" BSP Femal. External Thread 3/4" NPT Male.
• 1 Year Warranty.
www.samallen.com.au302
Pum
ps &
Plu
mbi
ng
23528
23528
23512
23510
23511
23530
23530
23530
Part No. Description
23512 DD120M Ocean Master Bilge Pump
23530 Service Kit
23552 Spare Conrod Assembly
23554 Spare Rocker Arm Assembly
• DTI approval for use on life boats, it is supplied with swivel arms and captive wheel nuts.
• The double diaphragm design ensures maximum efficiency.• Quick release hand wheels allow easy access to the pumping chamber,
no tools are required.• The pump body is made from polyester coated aluminium.• All fastenings and handles are made from stainless steel.• Nitrile rubber diaphragms are fitted as standard.
Part No. Description
23511 DD120 Portable Bilge Pump
23530 Service Kit
23552 Spare Conrod Assembly
23554 Spare Rocker Arm Assembly
• The Patay® DD120 Bilge Pump is portable, lightweight and suited for shipping, construction, agriculture, fire departments and petrol forecourts.
• The double diaphragm design ensures maximum efficiency.• Hand wheels allow easy access to the pumping chamber, no tools are
required.• The pump body is made from polyester coated aluminium.• All fastenings and handles are made from stainless steel.• Nitrile rubber diaphragms are fitted as standard.
Part No. Description
23510 DD120A Ocean Master Bilge Pump
23528 Under Deck Bracket & Cover
23530 Service Kit
23552 Spare Conrod Assembly
23554 Spare Rocker Arm Assembly
• The DD120A has a robust construction and large capacity are designed for heavy duty applications, ideal for work boats and larger leisure craft.
• The double diaphragm design ensures maximum efficiency.• Hand wheels allow easy access to the pumping chamber, no tools are
required.• The pump body is made from polyester coated aluminium.• All fastenings and handles are made from stainless steel.• Nitrile rubber diaphragms are fitted as standard.
Patay® DD120M Ocean Master Pump suited Life Boat Use
Patay® DD120 Portable Site Bilge Pumps
Patay® DD120A Ocean Master Pumps
SpecificationsCapacity
(Litres/min)Max. Head
Max.Lift Hose (I/D) Weight Height Length Width
136 L/min 6m 6m 38mm 4.5 kgs 265mm 356mm 183mm
SpecificationsCapacity
(Litres/min)Max. Head
Max.Lift Hose (I/D) Weight Height Length Width
136 L/min 6m 6m 38mm 4.5 kgs 265mm 356mm 183mm
SpecificationsCapacity
(Litres/min)Max. Head
Max.Lift Hose (I/D) Weight Height Length Width
136 L/min 6m 6m 38mm 6.4 kgs 295mm 560mm 200mm
136 Litres/min
136 Litres/min
136 Litres/min
Bilge Pump - ManualManual Bilge Pumps
Supplied with base not shown in image
www.samallen.com.au303
Pumps &
Plumbing
Patay® DD100A Sea Master Bilge Pump
Patay® DD70A Sea Master Bilge Pump
Patay® SD90 Bosun Base Mounted Bilge Pump
Part No. Description
23514 DD100A Sea Master Bilge Pump
23532 Service Kit
• The Patay® DD100A Sea Master can be on deck or under deck mounted or alternatively, bulk head or through bulk head mounted.
• The handle of this pump swings to either side of a vertical line.• The double diaphragm design ensures maximum efficiency and added
safety.• Easy access to the pumping chamber is provided by hand wheels, no
tools are required.• The pump body is made from polyester powder coated aluminium.• All fastenings and handles are made from stainless steel.• Nitrile rubber diaphragms are fitted as standard.
Part No. Description
23515 DD70A Sea Master Bilge Pump
23532 Service Kit
• This useful pump has been polyester powder coated to resist corrosive materials.
• The double diaphragm design ensures maximum efficiency and added safety.
• The robust construction and large capacity are designed for heavy duty applications, ideal for work boats and larger leisure craft.
• Easy access to the pumping chamber is provided by hand wheels, no tools are required.
• The pump body is made from polyester coated aluminium.• All fastenings and handles are made from stainless steel.• Nitrile rubber diaphragms are fitted as standard.
Part No. Description
23516 SD90 Bosun Bilge Pump
23534 Service Kit
• The Patay® SD90 Bilge Pump is suited for bilge water, toilet pump-outs and fuel transfer.
• Pump body can be turned 180° to reverse the flow. • Handle can be positioned for deck, bulkhead or under deck mounting
for easy installation.• Easy access quick-release front inspection cover.• The pump body is made from aluminium and nylon.• All fastenings are made from stainless steel.• Nitrile rubber diaphragms are valves.
SpecificationsCapacity
(Litres/min)Max. Head
Max.Lift Hose (I/D) Weight Height Length Width
96 L/min 5m 7m 38mm 3kgs 194mm 315mm 240mm
SpecificationsCapacity
(Litres/min)Max. Head
Max. Lift Hose (I/D) Weight Height Length Width
70 L/min 4.5m 6m 25.4mm 3kgs 265mm 356mm 183mm
SpecificationsCapacity
(Litres/min)Max. Head
Max.Lift Hose (I/D) Weight Height Length Width
80 L/min 6m 6m 32mm 3.1kgs 244mm 200mm 156mm
80 Litres/min
70 Litres/min
96 Litres/min
Manual Bilge Pumps
www.samallen.com.au304
Pum
ps &
Plu
mbi
ng
23520
23522
23523
23536
23536
23536
Part No. Description
23520 SD60 - Skipper Bilge Pump for Under Deck Mounting
23536 Service Kit
• The Patay® Skipper SD60 is lightweight and designed for under deck mounting.
• The body and ports can be positioned in various ways for maximum flexibility of installation.
• Supplied with deck plate and seals.• Reliable and inexpensive, this pump will withstand what ever the
elements have to throw at it and will give years of trouble free use.• The pump is made from polypropylene with stainless steel fastenings
and polyester coated castings.• Nitrile rubber diaphragms are fitted as standard.
Part No. Description
23522 SD60 - Skipper Bilge Pump
23536 Service Kit
• The Patay® Skipper SD60 is lightweight and designed for surface mounting on the deck or bulkhead.
• The body and ports can be positioned in 96 different ways for maximum flexibility of installation.
• Supplied with deck plate and seals.• Reliable and inexpensive, this pump will withstand what ever the
elements have to throw at it and will give years of trouble free use.• The pump is made from polypropylene with stainless steel fastenings
and polyester coated castings.• Removable Handle• Nitrile rubber diaphragms are fitted as standard.
Part No. Description
23523 SD60 - Skipper Bilge Pump with Fixed Handle
23536 Service Kit
• The Patay® Skipper SD60 is lightweight and designed for surface mounting on the deck or bulkhead.
• The body and ports can be positioned in 96 different ways for maximum flexibility of installation.
• Supplied with deck plate and seals.• Reliable and inexpensive, this pump will withstand what ever the
elements have to throw at it and will give years of trouble free use.• The pump is made from polypropylene with stainless steel fastenings
and polyester coated castings.• Nitrile rubber diaphragms are fitted as standard.
Patay® Skipper SD60 - Bilge Pump for Under Deck Mounting
Patay® Skipper SD60 - Bilge Pumps
Patay® Skipper SD60 - Bilge Pump with Fixed Handle
Great Value
Great Value
Possible Port (in/outlet)Positions
Possible Port (in/outlet)Positions
Possible Port (in/outlet)Positions
SpecificationsCapacity
(Litres/min)Max. Head
Max.Lift Hose (I/D) Weight Height Length Width
80 L/min 4.5m 6m 25 or 38mm 0.6 kgs 120mm 200mm 180mm
SpecificationsCapacity
(Litres/min)Max. Head
Max.Lift Hose (I/D) Weight Height Length Width
80 L/min 4.5m 6m 25 or 38mm 0.6 kgs 120mm 200mm 180mm
SpecificationsCapacity
(Litres/min)Max. Head
Max.Lift Hose (I/D) Weight Height Length Width
80 L/min 4.5m 6m 25 or 38mm 0.6 kgs 120mm 200mm 180mm
80 Litres/min
80 Litres/min
80 Litres/min
Manual Bilge Pumps
www.samallen.com.au305
Pumps &
Plumbing
Patay® SD60 Portaloo Toilet Pump
Part No. Description
23524 SD60T - Toilet Pump
• The SD60 Toilet Pump has been designed for the portaloo toilets.• The rugged design can withstand the most arduous and
prolonged use.• It has an excellent capacity of 0.75 litres per stroke and can pass solids
12.5mm when fitted with 25mm ports.• Simple to install with the round mounting ring and self-tapping screws
and fully interchangeable with other leading makes.• The inlet and outlet ports can be rotated in four directions to best suit
individual application.• Pump is made from corrosion resistant materials throughout with a
polypropylene body, nitrile seals, stainless steel fastenings and a one piece integral cast aluminium handle.
• Nitrile diaphragms are fitted as standard.
AAA Bilge Pump with Removable Handle
Part No. Description
23021 Manual Bilge Pump with Removable Handle
• Economical manual bilge pump offering great value.• Black nylon construction with removable stainless steel handle.• This self priming pump will deliver approximately 50 litres of water
per minute.• Dual size inlet/outlet suits both 25mm and 38mm I.D hose.
AAA Bilge Pump with Fixed Handle
Part No. Description
23022 Manual Bilge Pump with Fixed Handle
23022A Spare Diaphragm to suit 23022
• Economical manual bilge pump offering great value.• This self priming pump will deliver approximately 30 litres of water per
minute.• Fixed handle with rubber hand grip.• Inlet/outlet ports suit 25mm hose.
Great Value
Great Value
Great Value
SpecificationsCapacity
(Litres/min)Max. Head
Max.Lift Hose (I/D) Weight Height Length Width
50 L/min 3m 4m 25 or 38mm 0.75kg 375mm 160mm 90mm
SpecificationsCapacity
(Litres/min)Max. Head
Max.Lift Hose (I/D) Weight Height Length Width
30 L/min 3m 4m 25mm 0.5kg 285mm 175mm 155mm
SpecificationsCapacity
(Litres/min)Max. Head
Max.Lift Hose (I/D) Weight Height Length Width
66 L/min 4.5m 6m 25mm 0.88kg* 340mm 175mm 155mm
*Note: The weight includes plate bracket and screws.
66 Litres/min
50 Litres/min
30 Litres/min
Manual Bilge Pumps
www.samallen.com.au306
Pum
ps &
Plu
mbi
ng
Patay® Under Deck Seal and Cover
Part No. Description
23537 SD60/DD120 Oval Deck Flange, Rim and Seal Kit - Old Style
• Suitable for the Patay® SD60/DD120 bilge pump.• Includes oval deck flange, rim and six nuts and screws.
Patay® Under Deck Seal and Cover
Part No. Description
23527 Under Deck Seal and Cover
• Suitable for Patay® Skipper SD60 bilge pumps.• Includes seal, cover and four nuts and screws.
Manual Bilge Pump Spares & AccessoriesPatay® D120 Spares
Part No. Description
23550 Handwheel suits 23510 and 23512
23552 Patay D120 Conrod Assembly suits 23510 to 23512
23554 Patay D120 Rocker Arm Assembly suits 23510 and 23512
Patay® Rubber Deck Seal Ovals
Part No. Description
23560 Patay SD90 Rubber Deck Seal Oval
23561 Patay SD60 Rubber Deck Seal Ring Oval - Old Style
2356123560
23552
2355023554
Patay® Under Deck Bracket Seal and Cover
Part No. Description
23528 Under Deck Bracket Seal and Cover
• Suitable for Patay® DD120A/M bilge pumps.• Includes deck bracket, seal, cover and four nuts and screws.
Patay® D120 Service Kit
Part No. Description
23530 D120 Service Kit suits the 23510 to 23512
• This Service kit is for the Patay™ DD120 Ocean Master pump range. • The kit is supplied with 2 nitrile diaphragms, 1 conrod, 1 diaphragm
plate and 2 fixing screws and washers.• Also suitable for Jabsco® Amazon Pump.
www.samallen.com.au307
Pumps &
Plumbing
General Purpose Pump SystemsNon-return Valves
Part No. Description
45458 25/40mm Non-Return Valve
45459 29/40mm Non-Return Valve (suits most 1000 - 2000 GPH Bilge Pumps)
• Dual size to suit two different hose sizes.• Made from reinforced nylon with neoprene valves and stainless steel
fasteners.• Australian made premium valves.
Dual Size Non Return Valves
Patay® Strum Box Strainer
Part No. Description
23538 25/38mm Strum Box Strainer
• Strum box strainer with Non-Return valve suits all pumps.• Supplied with 25mm and 38mm hose connector options.
Patay® Non Return Valve
Part No. Description
23539 Non-Return Valve suits 20mm Hose
23540 Non-Return Valve suits 25mm Hose
23542 Non-Return Valve suits 38mm Hose
• Suitable for all brands of pumps.
Non Return Valve
Part No. Description
45484 Non-Return Valve suits 12mm and 20mm
• One way valve suitable for galley pumps.• Stepped ports suit 12/20mm hose sizes.• Australian made premium valves.
Part No. Description
5022 3/4" 20mm BSP Non-Return Valve
5023 1" 25mm BSP Non-Return Valve
5024 1-1/4" 32mm BSP Non-Return Valve
5025 1-1/2" 38mm BSP Non-Return Valve
• Parallel BSP thread, stainless steel spring loaded non-return valve.
Heavy Duty Nylon Non-Return Valves
Premium
Premium
www.samallen.com.au308
Pum
ps &
Plu
mbi
ng
Kayak Pump
Part No. Description
23097 Kayak Pump
• Compact light weight suitable for all kayaks.• Buoyant hand grip.• Overall length: 540mm• Built in strainer at base.
SHURflo® General Purpose Drill Pump
Part No. Flow Rate Port Size Dimensions
23947 3.5 GPM(13.2 LPM) 3/4” GSH M 1/4” (6mm) Drill Shaft - Flexible
BUNA Impeller. 8ft (2.4m) Prime
• Perfect for oil change, winterising, automatic transmission fluids, anti-freeze solutions, low viscosity gear and liquid transfer.
• 1/4” shaft fits standard drill.• Self primes up to 8ft vertical, 25 feet horizontal.• Pumps liquids 40°F-120°F.• Buna-N impeller seals.• 3/4” male garden hose ports.• Hoses Included.• CE listed.• 1 Year Warranty.
Pump
Boat Hull
‘Through Hull’ Pickup
Cover
Exsiting Nut
WasherBase
EZ Pump™ Advanced Water Pick-Up Systems
Part No. Description
23570 20mm Non-Return Valve
23572 25mm Non-Return Valve
• Fills and Aerates Live Well while Underway• Eliminates need for re-circulation that recycles oxygen depleted water
in wells.• Mounts Over Aerator Pump Intake Built In Filter Screen
Pick-Up, Kayak & Drill Pump
www.samallen.com.au309
Pumps &
Plumbing
Part No. GPM LPM Volt(V)
Amp(A)
Max. Head (ft)
Outlet Dia. (in) Dimensions (mm)
23990 4.75 18 12V 6.5A 6.6ft 3/4" 155 x 100 x 150
23994 4.75 18 24V 3.5A 6.6ft 3/4" 155 x 100 x 150
• Excellent diaphragm pump, useful for bilge and other purposes.• Pump is self priming up to 2m vertical lift, thus may be mounted some distance
from water.• Pump base and motor support are nylon made, and the movement is carried
out on ball bearings.• Pump can run dry for longer periods without suffering any damages.• Complete with a filter (pump guard).
SHURflo® Bilge Pumps - 500 GPH, 750 GPH & 1000 GPH
Matromarine® Diaphragm Pumps
Part No. Series GPH LPH Volt(V)
Amp(A)
Max. Head (ft)
Outlet Dia. (in)
Dimensions (mm)
232104 1500 1800 6814 12V 8A 14ft 1 1/8" 184 x 154
232106 2000 2200 8328 12V 10A 18ft 1 1/8" 184 x 154
232108 2000 2200 8328 24V 5A 18ft 1 1/8" 184 x 154
• Tough nylon housing construction. • Patented water cooled motor ensures high performance and long life.• Fully submersible with anti-airlock protection.• Patented snap swivel base with 1.8m (6ft) tinned wire for easy installation.• CE Certified, Ignition Protected ISO 8849.• 3 Year Warranty.
SHURflo® Bilge Pumps - 1500 Series & 2000 Series
Bilge Pump Series Head 0ft Head 3ft Head 6ft
232104 1500 1800 GPH / 6814 LPH
1700 GPH / 6435 LPH
1600 GPH / 6057 LPH
232106 2000 2200 GPH / 8328 LPH
2000 GPH / 7571 LPH
1900 GPH / 7192 LPH
232108 2000 2200 GPH / 8328 LPH
2000 GPH / 7571 LPH
1900 GPH / 7192 LPH
Bilge Pump SystemsBilge Pumps
Bilge Pump Series Head 0ft Head 3ft Head 6ft
232100 500 500 GPH / 1893 LPH
430 GPH / 1628 LPH
270 GPH / 1022 LPH
232101 700 700 GPH / 2650 LPH
600 GPH / 2271 LPH
500 GPH / 1893 LPH
232102 1000 1000 GPH / 3785 LPH
840 GPH / 3180 LPH
650 GPH / 2460 LPH
Once the base is secured to the hull the bilge pump can be rotated 180° left or right for easy installation
refer to your instruction guide supplied.
Part No. GPH LPH Volt(V)
Amp(A)
Max. Head (ft)
Outlet Dia. (in)
Dimensions (mm)
232100 500 1893 12V 1.8A 7.5ft 3/4" 114 x 95
232101 700 2650 12V 3.2A 10ft 3/4" 114 x 95
232102 1000 3785 12V 3.2A 11ft 1 1/8" 114 x 95
23224 SHURflo® Bilge Pump Float Switch suits 232100, 232101, 232102
• Fully submersible with anti-airlock protection.• Stainless steel shaft.• Tough nylon impeller and baseplate construction.• Transom mount with 0.9m (3ft) tinned wire for easy installation.• CE Certified, Ignition Protected ISO 8849.• Mounting clip suits the 23224 SHURflo® Bilge Pump Float Switch.• 3 Year Warranty.
www.samallen.com.au310
Pum
ps &
Plu
mbi
ng
Part No. Volt (V) Amp (A) Max Dimensions (mm)
23179 12/24V 10/5A 113 x 83 x 25
• Combine with bilge pump for automatic operation.• Float switch is made of high impact plastic, ultrasonically welded
together for permanent waterproofing performance.• Non-mercury mechanical switch.• 8.5m tinned wire, fitted with eye terminals for easy installation.• Supplied with 2 mounting screws.
Part No. Volt (V) Amp (A) Max Dimensions (mm)
23181 12/24V 10/5A 180 x 114 x 127
• Combine with bilge pump for automatic operation.• Float switch is made of high impact plastic, ultrasonically welded
together with easy to remove shield.• Non-mercury mechanical switch.• Clear plastic shield makes it easy to see if debris is blocking switch.• 8.5m tinned wire, fitted with eye terminals for easy installation.• Supplied with 4 mounting screws.
TMC® Micro Float Switch
113mm
54mm
23mm
25mm
(OFF)
62mm
(ON
)
83mm69mm
Part No. Volt (V) Amp (A) Max Dimensions (mm)
23224 12/24V 12/6A 112 x 92 x 32
• Combine with SHURflo® bilge pumps for automatic operation.• Non-mercury mechanical switch.• Remote or direct mounting on to bilge pump for easy installation.• 0.9m (3ft) tinned wire assembly.• CE Certified, Ignition Protected ISO 8849.• 3 Year Warranty.
SHURflo® Bilge Pump Float Switch
TMC® Micro Float Switch with Guard
180mm
114mm
127mm
Bilge Pumps & Float Switches
Great Value
Directly mounted on to bilge pump.
Part No. GPH LPH Volt(V)
Amp(A)
Max. Head (m)
Outlet Dia. (in) Dimensions (mm)
23197 500 1893 12V 1.6A 9ft 3/4" 136 x 82 x 110
23198 1000 3785 12V 4.5A 13ft 1" 165 x 96 x 130
23199 1500 5678 12V 9A 13ft 1" 191 x 108 x 150
• Auto eye series fully automatic bilge pump.• Built-in electronic controlled read sensor system.• No separate float switch is needed.• No power use until pump turns on.• Certified ISO-9001 certified ISO 14001.• Two year limited warranty.
NOTE: As with all submersible electronics, attention is needed during installation to ensure that wiring connections remain above water level.
TMC® Bilge Pumps Auto Eye Series
www.samallen.com.au311
Pumps &
Plumbing
23979
Bilge Pump Strainers
SHURflo® Raw Water StrainersPart No. Description
23979 1/2" NPTF AFT Raw Water Strainers
23984 3/4" NPTF AFT Raw Water Strainers
23986 1" NPTF Raw Water Strainers
23987 Replacement Screen suits 23984 and 23986
• SHURflo’s family of raw water strainers are built to keep your bait tank, livewell and wash down pumps protected from harmful debris.
• Twist off polyamide bowl and removable stainless steel screen, which allows for easy inspection and cleaning.
• Integral 'O'ring creates a tight seal, eliminating possible leaks, keeping your pumps and components lasting longer.
• 1 Year Warranty.
23984
23986 23987
SHURflo® Extreme™ Series High Flow Strainer Part No. Description
23988 Extreme™ Series High Flow Strainer
• The Extreme™ Series High Flow Strainer is engineered to compliment the higher performance of the Smart Sensor™ pumps.
• 50 Mesh screen protects pumps from harmful debris.• High capacity.• Rugged nylon housing with clear twist off polyamide bowl.• Easy to clean slide out screen.• Inlet: supplied with 23972 Quick Connect straight coupler.• Outlet: supplied with 23973 Quick Connect 1/2" NPT (M) straight.• 1 Year Warranty.
NOTE: For use with all Extreme™ Series Smart Sensor™ 5 .7 Pumps only .
SHURflo® Twist-On Water StrainerPart No. Description Port Size
23955 Twist-On Water Strainer 1/2” (13mm) Pipe Inlet
• Designed to protect your pump from harmful debris. Big protection from a small, yet essential product.
• Inlet 1/2 NPT-Female (can be screwed directly onto SHURflo® pump) • Outlet 1/2 NPT-Male (a SHURflo® swivel tail can be used to screw onto
the outlet ref to"SHURflo® Hose Fittings" on page 296).• Convenient and easy assembly. • Keeps debris out of pump. • Transparent, easy to see when strainer needs cleaning. • 50 mesh stainless steel screen.• 1 Year Warranty.
Blowers
Part No. Description Hose Size CFM Volt (V) Amp (A) Dimensions (mm)
39653 Blower 3" 120 12V 3.8A 130 x 140 x 96
39654 Blower 4" 220 12V 5.5A 130 x 162 x 122
• Ventilation for engine compartments, bilges, galleys and head closets.• 6 Blade nylon fan in a heavy duty housing.• Compact design with extended barbs for ease of installation.• Sealed motor, shaft and wires for corrosion resistance and long life.• CE Certified, Ignition Protected ISO 9097 continuous duty.• 3 Year Warranty.• "Ventilation Hose" on page 345
SHURflo® Yellow Tail™ In Line Blowers
www.samallen.com.au312
Pum
ps &
Plu
mbi
ngPart No. m³p/h / CFM Volt (V) Amp (A) Inlet(mm)
Outlet(mm) Dimensions (mm)
39700 280 / 163 12V 3.9A 75 72 200 x 165 x 195
39702 280 / 163 24V 2.5A 75 72 200 x 165 x 195
39704 550 / 324 12V 11.5A 100 103 290 x 257 x 150
39706 550 / 324 24V 7A 100 103 290 x 257 x 150
39708 750 / 441 12V 15A 150 103 290 x 257 x 150
39710 750 / 441 24V 8A 150 103 290 x 257 x 150
39712 1000 / 589 24V 16A 150 103 290 x 257 x 180
• Laguna Marine Flange Mount Blowers come in 12 and 24 volts, ranging from 163 to 589 cubic feet per minute designed for ventilating engine compartments, bilges, galleys and head closets.
• Made from strong fibreglass material with screws and shaft in stainless steel.• Low current draw for continuous duty.• CE Certified, Ignition Protected ISO 8849, EN 55014, ISO 10133.• "Ventilation Hose" on page 345
Part No. m³p/h / CFM Volt (V) Amp (A) Inlet(mm)
Outlet(mm) Dimensions (mm)
39714 550 / 324 12V 11.5A 100 103 290 x 257 x 150
39716 550 / 324 24V 7A 100 103 290 x 257 x 150
39718 750 / 441 12V 15A 150 103 290 x 257 x 150
39720 750 / 441 24V 8A 150 103 290 x 257 x 150
39722 1000 / 589 24V 16A 150 103 290 x 257 x 180
• Laguna Marine Flex Mount Blowers come in 12 and 24 volts, ranging from 324 to 589 cubic feet per minute designed for ventilating engine compartments, bilges, galleys and head closets.
• Made from strong fibreglass material with screws and shaft in stainless steel.• Low current draw for continuous duty• CE Certified, Ignition Protected ISO 8849, EN 55014, ISO 10133.• "Ventilation Hose" on page 345
Part No. m³p/h / CFM Volt (V) Amp (A) Inlet(mm)
Outlet(mm) Dimensions (mm)
39726 750 / 441 12V 3.9A 178 175 200 x 165 x 195
39728 750 / 441 24V 2.5A 178 175 200 x 165 x 195
• Laguna Marine In Line Blowers utilise advanced fan blade design technologies suitable for bulkhead mounting.
• No other bilge blowers in the industry provides such a powerful system output at such a low power input in a compact size.
• Silent operation.• Low current draw for continuous duty.• CE Certified, Ignition Protected ISO 8849, EN 55014.• "Ventilation Hose" on page 345
Part No. m³p/h / CFM Volt (V) Amp (A) Inlet(mm)
Outlet(mm) Dimensions (mm)
39542 150 / 90 12V 3A 76 76 195 x 160 x 145
• The TMC Flange Mount Blower is designed to remove flanable fuel vapors from below deck for ventilating engine compartments, bilges, galleys and head closets.
• Spark proof.• Maximum air flow 90 CFM.• 76mm (3") Intake pipe.• Bracket included.
Laguna Marine Flange Mount Blowers
Laguna Marine Flex Mount Blowers
Laguna Marine In Line Blowers
TMC Flange Mount Blowers
Blowers
www.samallen.com.au313
Pumps &
Plumbing
Spare Parts for the 45023 and 45037
Ref Part No. Description Qty
16 SPE16 Wear plate 118 SPE18 Centrifugal Impeller 119 SPE19 Macerator Housing 120 *SPE20 Razor Blade 1
22-1 TMCE22-1 Base 123 *SPE23 Flapper Valve 1
25 SPE25 Hose Adaptor ⅝" (16mm) - 1" (25mm) 1
25-1 SPE25-1 Hose Adaptor 1" (25mm) - 1 ½" (38mm) 126 *SPE26 Slinger 128 *SPE28 Gasket 129 *SPE29 Rubber Impeller 130 SPE30 Seal 134 SPE34 Shaft O'ring fits SPE16 Wear plate 142 SPE42 Screw for Discharge Port 255 SPE55 Electric Motor Cover 164 SPE64 Pipe Bender 131 SPE190 12V Motor Only 1
48-53 SPE196 12V Switch Box 1
45046 Complete Motor and Macerator Base Set to suit TMC® Deluxe Toilet - 12V 1
45039 Complete Motor and Macerator Base Set to suit TMC® Deluxe Toilet - 24V 1
*NOTE: These parts are now sold in kits
Service Kits for the 45023 and 45037
Part No. Description Qty
SPE186 Electric Toilet Repair Kit (26, 27, 28, 29 & 30) 1SPE198 Deluxe Toilet Lid Assembly Kit (2-3 & 5-8) 1
SPE3625 Inlet Fitting Kit (11, 12, 13, 14) 1SPE3626 Pump Razor Kit (20-21, 35, 37-41, 57 & 58) 1
SPE3627 Pump Gasket Kit (17, 21, 26, 28, 32-34, 40-41, 43 & 65) 1
SPE3628 Pump Body Kit (21 & 26-29) 1SPE3634 Pump Impeller (28 & 29) 1SPE4530 Base Port Kit (23, 37, 39, 42 & 64) 1SPE4535 Base Gasket Kit (36, 44, 46, 60-62 & 67) 1
Part No. Volt Amp Fuse Inlet/Outlet Mount Holes (mm)
Dimensions H x L x W(mm)
45023 12V 20A 30A 20/25mm 10 r/h 388 x 490 x 368
• Electric marine toilet with small skirted, white vitreous china bowl and deluxe plastic seat and lid assembly.
• Push button operation. • Strong motor and macerator unit for quiet efficient flushing.• Supplied complete with wired switch box unit. • An outlet adaptor is supplied to increase outlet size to 38mm for installation as a
replacement of an existing manual toilet.
TMC® Luxury Home Style Electric Marine Toilet - 12V Standard Bowl
Part No. Volt Amp Fuse Inlet/Outlet Mount Holes (mm)
Dimensions H x L x W(mm)
45037 12V 18A 25A 20/25mm 10 r/h 365 x 440 x 340
• Electric marine toilet with small skirted, white vitreous china bowl and deluxe plastic seat and lid assembly.
• Compact design.• Push button operation. • Strong motor and macerator unit for quiet efficient flushing.• Supplied complete with wired switch box unit. • An outlet adaptor is supplied to increase outlet size to 38mm for installation as a
replacement of an existing manual toilet.
TMC® Luxury Home Style Electric Marine Toilet - 12V Compact Bowl
Marine ToiletsElectric Toilets
388mm
365mm
www.samallen.com.au314
Pum
ps &
Plu
mbi
ng
Part No. Volt Amp Inlet/Outlet Mount Holes (mm)
Dimensions H x L x W (mm)
45035 12V 20A 25/25mm 10 r/h 450 x 470 x 360
45036 24V 10A 25/25mm 10 r/h 450 x 470 x 360
• Luxury home style toilet, white vitreous china bowl and moulded plastic seat and lid assembly.
• Push button operation. • Strong motor and macerator unit for quiet efficient flushing.• Supplied complete with wired switch box unit. • An outlet adaptor is supplied to increase outlet size to 38mm for installation as a
replacement of an existing manual toilet.
TMC® Luxury Home Style Electric Marine Toilet - Large Bowl
Service Kits for the 45035 and 45036
Part No. Description Qty
SPE186 Electric Toilet Repair Kit (26, 27, 28, 29 & 30) 1SP199 Toilet Lid Assembly Kit (2-3 & 5-8) 1
SPE3626 Pump Razor Kit (20-21, 35, 37-41, 57 & 58) 1
SPE3627 Pump Gasket Kit (17, 21, 26, 28, 32-34, 40-41, 43 & 65) 1
SPE3628 Pump Body Kit (21 & 26-29) 1SPE3634 Pump Impeller (28 & 29) 1SPE4530 Base Port Kit (23, 37, 39, 42 & 64) 1SPE4535 Base Gasket Kit (36, 44, 46, 60-62 & 67) 1
Spare Parts for the 45035 and 45036
Ref Part No. Description Qty
16 SPE16 Wearplate 118 SPE18 Centrifugal Impeller 119 SPE19 Macerator Housing 120 *SPE20 Razor Blade 1
22-1 TMCE22-1 Base 123 *SPE23 Flapper Valve 125 SPE25 Hose Adaptor ⅝" (16mm) - 1" (25mm) 1
25-1 SPE25-1 Hose Adaptor 1" (25mm) - 1 ½" (38mm) 126 *SPE26 Slinger 128 *SPE28 Gasket 129 *SPE29 Rubber Impeller 130 SPE30 Seal 134 SPE34 Shaft O'ring fits SPE16 Wearplate 142 SPE42 Screw for Discharge Port 255 SPE55 Electric Motor Cover 164 SPE64 Pipe Bender 131 SPE190 12V Motor Only 131 SPE191 24V Motor Only 1
48-53 SPE196 12V Switch Box 148-53 SPE197 24V Switch Box 1
45046 Complete motor and macerator base set to suit TMC® Toilet - 12V 1
45039 Complete motor and macerator base set to suit TMC® Toilet - 24V 1
*NOTE: These parts are now sold in kits
Electric Toilets
450m
m
www.samallen.com.au315
Pumps &
Plumbing
Part No. Volt Amp Inlet/Outlet Mount Holes (mm) Dimensions H x L x W (mm)
45042 12V 20A 25/25mm 10 r/h 350 x 425 x 320
45043 24V 10A 25/25mm 10 r/h 350 x 425 x 320
• Small bowl configuration. • Push button operation. • White vitreous china bowl with plastic seat and lid. • Strong motor and macerator unit for quiet efficient flushing.• Supplied complete with wired switch box unit. • An outlet adaptor is supplied to increase outlet size to 38mm for installation as a
replacement of an existing manual toilet.
Part No. Volt Amp Inlet/Outlet Mount Holes (mm) Dimensions H x L x W (mm)
45048 12V 20A 25/25mm 10 r/h 380 x 490 x 365
45049 24V 10A 25/25mm 10 r/h 380 x 490 x 365
• Large bowl configuration.• Push button operation. • White vitreous china bowl with plastic seat and lid. • Strong motor and macerator unit for quiet efficient flushing.• Supplied complete with wired switch box unit. • An outlet adaptor is supplied to increase outlet size to 38mm for installation as a
replacement of an existing manual toilet.
TMC® Standard Electric Toilets - Small Bowl
TMC® Standard Electric Toilets - Large Bowl
Service Kits for the 45042 to 45049
Part No. Description Qty
SPE186 Electric Toilet Repair Kit (26, 27, 28, 29 & 30) 1SP199 Toilet Lid Assembly Kit (2-3 & 5-8) 1
SPE3625 Inlet Fitting Kit (11, 12, 13, 14) 1SPE3626 Pump Razor Kit (20-21, 35, 37-41, 57 & 58) 1
SPE3627 Pump Gasket Kit (17, 21, 26, 28, 32-34, 40-41, 43 & 65) 1
SPE3628 Pump Body Kit (21 & 26-29) 1SPE3634 Pump Impeller (28 & 29) 1SPE3825 Discharge Port Kit (39, 23, 24, 37 & 42) 1SPE4530 Base Port Kit (23, 37, 39, 42 & 64) 1SPE4535 Base Gasket Kit (36, 44, 46, 60-62 & 67) 1
Electric Toilets
Spare Parts for the 45042 to 45049
Ref Part No. Description Qty
16 SPE16 Wearplate 118 SPE18 Centrifugal Impeller 119 SPE19 Macerator Housing 120 *SPE20 Razor Blade 122 SPE22 Base 123 *SPE23 Flapper Valve 1
25 SPE25 Hose Adaptor ⅝" (16mm) - 1" (25mm) 1
25-1 SPE25-1 Hose Adaptor 1" (25mm) - 1 ½" (38mm) 126 *SPE26 Slinger 128 *SPE28 Gasket 129 *SPE29 Rubber Impeller 130 SPE30 Seal 134 SPE34 Shaft O'ring fits SPE16 Wearplate 142 SPE42 Screw for Discharge Port 255 SPE55 Electric Motor Cover 164 SPE64 Pipe Bender 131 SPE190 12V Motor Only 131 SPE191 24V Motor Only 1
48-53 SPE196 12V Switch Box 148-53 SPE197 24V Switch Box 1
45045 Complete motor and macerator base set to suit TMC® Toilet - 12V 1
45047 Complete motor and macerator base set to suit TMC® Toilet - 24V 1
*NOTE: These parts are now sold in kits
www.samallen.com.au316
Pum
ps &
Plu
mbi
ng
TMC® Electric Toilets Spare Parts
TMC® Electric Toilets Spare Part Kits
Part No. Description
SPE3625 Inlet Fitting Kit
SPE3626 Pump Razor Kit
SPE3627 Pump Gasket Kit
SPE3628 Pump Body Kit
SPE3634 Pump Impeller
SPE3825 Electric Toilet Discharge Port Kit
SPE4530 Base Port Kit
SPE4535 Base Gasket Kit
Part No. Description
SPE16 Wear PlateSPE18 Centrifugal ImpellerSPE19 Macerator Housing
*SPE20 Razor BladeSPE22 Base - Suits Electric Toilets
TMCE22-1 Base - Suits Luxury Home Style Toilets*SPE23 Flapper ValveSPE25 Hose Adaptor ⅝" (16mm) - 1" (25mm)
SPE25-1 Hose Adaptor 1" (25mm) - 1 ½" (38mm)*SPE26 Slinger*SPE28 Gasket*SPE29 Rubber ImpellerSPE30 SealSPE34 Shaft O-Ring fits SPE16 Wear PlateSPE42 Screw for Discharge PortSPE55 Electric Motor CoverSPE64 Pipe Bender
SPE186 Electric Toilet Repair KitSPE190 12V Motor OnlySPE191 24V Motor OnlySPE196 12V Switch BoxSPE197 24V Switch Box
SPE198 Deluxe Toilet Lid Assembly Kit
SP199 Toilet Lid Assembly Kit
45046 Complete Motor and Macerator Base Set to suit TMC® Deluxe Toilet - 12V
45039 Complete Motor and Macerator to suit TMC® Deluxe Toilet - 24V (Base set not included*)
45045 Complete motor and macerator base set to suit standard TMC® Toilet - 12V
45047 Complete motor and macerator base set to suit standard TMC® Toilet - 24V
*NOTE: These parts are now sold in kits
SPE196S & SPE197
SPE55
SPE26
SPE30
SPE19
SPE23
45045 & 45047
SPE64
SPE16
SPE20
SPE28
SPE25
SPE198 & SP199
SPE186
SPE190 & SPE191
SPE18
TMCE22-1
45039* & 45046
SPE29
SPE25-1
SPE3626
11 12 13 14
SPE3625
SPE3627
SPE4530 SPE4535SPE3634 SPE3825
SPE3628
Electric Toilet Spares
www.samallen.com.au317
Pumps &
Plumbing
Low Head
Part No. Volt Amp Inlet/Outlet Water Consumption Dimensions H x L x W (mm)
453002* 12V 18A 19/38mm 1 - 2.5 litres 385 x 450 x 362
453004* 24V 12A 19/38mm 1 - 2.5 litres 385 x 450 x 362
• Italian designed and crafted vitreous white porcelain bowl, seat and lid in wood with stainless steel hinges. Deluxe design just like a home toilet.
• Low head model (385mm height).• Hydro-vacuum system. • Base is made from an anti-crash material and the body pump is brass.• Compact size, extremely comfortable.• Easy to install either above or below sea level.• Low water consumption (approximately 1 - 2.5 litres).• Silent operation.• Includes 3 button switch panel (refer to "BlueWave 3 Buttons Control Panel" on
page 319 for functions).• Complies with ISO 8846, EN 55014.
Standard Head
Part No. Volt Amp Inlet/Outlet Water Consumption Dimensions H x L x W (mm)
453014* 12V 18A 19/38mm 1 - 2.5ltr 455 x 450 x 362
453018* 24V 12A 19/38mm 1 - 2.5ltr 455 x 450 x 362
• Standard head model (455mm height).NOTE: Features same as 453002 and 453004 .
BlueWave Toilet Hydro Vacuum Systems
453002 - 453004Low Model
450 362
330410
385
450 362
330410
455
453014 - 453018 Standard Model
Low Head - Bevelled
Part No. Volt Amp Inlet/Outlet Water Consumption Dimensions H x L x W (mm)
453008* 12V 18A 19/38mm 1 - 2.5ltr 385 x 450 x 362
453010* 24V 12A 19/38mm 1 - 2.5ltr 385 x 450 x 362
• Italian designed and crafted vitreous white porcelain bowl, seat and lid in wood with stainless steel hinges. Deluxe design just like a home toilet.
• Low head model (385mm height) with 50mm bevelled back.• Hydro-vacuum system. • Base is made from an anti-crash material and the body pump is brass.• Compact size, extremely comfortable.• Easy to install either above or below sea level.• Low water consumption (approximately 1 - 2.5 litres).• Silent operation.• Includes 3 button switch panel(refer to "BlueWave 3 Buttons Control Panel" on
page 319 for functions).• Complies with ISO 8846, EN 55014.
Standard Head - Bevelled
Part No. Volt Amp Inlet/Outlet Water Consumption Dimensions H x L x W (mm)
453022* 12V 18A 19/38mm 1 - 2.5ltr 455 x 450 x 362
453026* 24V 12A 19/38mm 1 - 2.5ltr 455 x 450 x 362
• Standard head model (455mm height) with 50mm bevelled back.NOTE: Features same as 453008 and 453010 .
BlueWave Toilet Hydro Vacuum System - Bevelled
450 362
330410
385
50
453002 - 453004Low Model
450 362
33036050
455
453022 - 453026 Standard Model
Standard Head - Soft Close
Part No. Volt Amp Inlet/Outlet Water Consumption Dimensions H x L x W (mm)
453054* 12V 18A 19/38mm 1 - 2.5ltr 455 x 450 x 362
453056* 24V 12A 19/38mm 1 - 2.5ltr 455 x 450 x 362
• The Luxury design features the "soft close" seat and lid.• Standard head model (455mm height).
NOTE: Features same as 453002 and 453004 .
Hydro Vacuum Toilets
* Requires remote pumps refer to "BlueWave Remote Water Delivery Pumps" on page 319
* Requires remote pumps refer to "BlueWave Remote Water Delivery Pumps" on page 319
www.samallen.com.au318
Pum
ps &
Plu
mbi
ng
Part No. Volt Amp Inlet/Outlet Water Consumption Dimensions H x L x W (mm)
453030 12V 13A 19/38mm 1.5 - 3 litres 373 x 425 x 345
• Italian designed and crafted vitreous white porcelain bowl. • Electric compact model toilet. • Base is made from an anti-crash material and the body pump is brass.• Compact size, extremely comfortable.• Easy to install either above or below sea level.• Ultra low water consumption (approximately 1.5 - 3 litres).• Includes switch panel.• Complies with ISO 8846, EN 55014.
Part No. Volt Amp Inlet/Outlet Water Consumption Dimensions H x L x W (mm)
453036 12V 13A 19/38mm 1.5 - 3 litres 385 x 490 x 365
• Italian designed and crafted vitreous white porcelain bowl. • Electric comfort silent model toilet. • Base is made from an anti-crash material and the body pump is brass.• Extremely comfortable.• Easy to install either above or below sea level.• Ultra low water consumption (approximately 1.5 - 3 litres).• Includes switch panel.• Complies with ISO 8846, EN 55014.
BlueWave Compact Electric Toilet System
BlueWave Comfort Silent Electric Toilet System
425 345
Ø172
373
490 365
Ø172
385
Part No. Volt Amp Inlet/Outlet Water Consumption Dimensions H x L x W (mm)
453033* 12V 11A 19/38mm 1.5 - 3 litres 390 x 420 x 335
453034* 24V 6A 19/38mm 1.5 - 3 litres 390 x 420 x 335
• Italian designed and crafted vitreous white porcelain bowl. • Compact model toilet. • Hydro-vacuum system. • Base is made from an anti-crash material and the body pump is brass.• Compact size, extremely comfortable.• Easy to install either above or below sea level.• Low water consumption (approximately 1.5 - 3 litres).• Silent operation.• Includes 3 button switch panel (refer to "BlueWave 3 Buttons Control Panel" on
page 319 for functions).• Complies with ISO 8846, EN 55014.
BlueWave Compact Silent Electric Toilet System
420 335
Ø172
390
Part No. Volt Amp Inlet/Outlet Water Consumption Dimensions H x L x W (mm)
453050 12V 19A 19/38mm 1 - 2.5ltr 359 x 411 x 340
453052 24V 10A 19/38mm 1 - 2.5ltr 359 x 411 x 340
• Italian designed and crafted vitreous white porcelain bowl. • Electric standard toilet. • Base is made from an anti-crash material and the body pump is brass.• Extremely comfortable.• Easy to install either above or below sea level.• Low water consumption (approximately 1 - 2.5 litres).• Includes switch panel.• Complies with ISO 8846, EN 55014.
Laguna Electric Toilet System
411 340
260316
359
Electric Toilets
* Requires remote pump refer to "BlueWave Remote Water Delivery Pumps" on page 319
www.samallen.com.au319
Pumps &
Plumbing
Part No. Description
453048 Bluewave Inlet Hydro Valve - 12V
• Connection for 1/2"ID hose.• Italian made quality.
Part No. Description
453090 Bluewave Flush Pump - 12V
453092 Bluewave Flush Pump - 24V
• Flush pump 9 LPM• Connection for 1/2"ID hose.• Italian made quality.
Part No. Description
453060 3 Buttons Control Panel with Level Indicator
• Matromarine 3 Buttons Control Panel is the latest in design and technology, equipped with a programmed microprocessor having 3 options:-
• SHORT USE: ideal for reduced water consumption.• BEFORE USE: pressed before use, coating the surface with water, thus
preventing waste from adhering to the ceramic sides of the toilet.• AFTER USE: this button is pushed after using the toilet to start a
complete flush leaving the bowl clean and in the stand-by position.
BlueWave Electrovalve
BlueWave Remote Water Delivery Pumps
BlueWave 3 Buttons Control Panel
Part No. Description
45027 Toilet Flush Controls - 12V
45029 Toilet Flush Controls - 24V
• Comes with boxed fuse package.• One touch control panel.• Equipped with splash proof seals.• Built-in Max. 40 AMP relay circuit loop. Design to protect the
operation against high current.• Built-in micro IC control system allows.
Two flush options: • Half flush (last for 5 seconds flush and delivers 2 litres of water.• Full flush - last for 10 seconds and delivers 4 litres of water.
TMC® Electric Toilet Flush Controls
Part No. Description
453040 Hydro Vacuum Kit - 12V
453042 Hydro Vacuum Kit - 24V
• Converts compact and comfort bowl of most toilets with 4 bolt fixing bowls and bolt centres on a 95mm (3 3/4”) diameter.
• Suits Matromarine, Jabsco, TMC, Raritan, RM69, Johnson Pumps and Thetford.
• Kit contains all necessary parts, such as stainless steel bolts and washers, hose and gaskets and control panel in the electric version.
BlueWave Hydro Vacuum Kits
Toilet Spares & Accessories
www.samallen.com.au320
Pum
ps &
Plu
mbi
ng
Part No. Description
321630 Drop In Sanitation & Deodorise Sachets - 12 Sachets Per Bag
• Provides long-term odour prevention for all home, caravan, camping and portable toilet applications.
• Blue nonstaining colour dissolves quickly and cleans holding tanks. • Breaks down solid waste and paper.
TSS Portable Toilet Holding Tank Sanitation & Deodorise Sachets
Toilet Accessories
Part No. Description Dimensions H x L x W (mm)
45041 13 Litre Portable Chemical Toilet 314 x 410 x 361
45041R Stainless Steel Retainer Clip Set suits 45041
• The Springfield portable toilet is the perfect solution where sewage is not permitted to be discharged over board.
• Made from high density polyethylene.• Reliable bellow flush pump for simple flushing between use.• Detachable waste tank for easy disposal of waste into domestic toilet
or sewage collection point. • Upper flush tank capacities 12 litres(12kgs).• Lower hold tank capacities 11 litres (11kgs).
Springfield® Portable Chemical Toilet
45041R
45041
Part No. Description
29643 1-1/4" 32mm BSPT Waste Camlock Connector Nylon
29642 1-1/2" 40mm BSP Waste Camlock Connector Poly
Part No. Description
39750 12V Electric Toilet Conversion Kit
39752 24V Electric Toilet Conversion Kit
• Converts a manual to an electric toilet suitable for any 4 bolt mounts with bolt centres 95mm (3-3/4”) diameter apart such as Matromarine, Jabsco, TMC, Raritan, RM69, Johnson Pump, Thetford.
• Kit Included: stainless steel bolts, washers, hose, gaskets and control panel.
Waste Camlock Connectors
Electric Toilet Conversion Kit
Part No. Description
29650 Waste Extraction Connector with Black Cap
• 316G stainless steel.• Tail - 1-1/2" (38mm hose).
Waste Extraction Connector with Black Cap
www.samallen.com.au321
Pumps &
Plumbing
Waste Tanks
Part No. Description Dimensions (mm)L x W x H
45236 Grey Water Catchment Tray 275 x 200 x 140
• Centralises all water drains from showers, sinks etc.• Pump or switch not included.• Fits hoses ranging from 3/4" - 1 1/2".• Length 350mm included hose connectors.
Part No. Capacity (Litre) Dimensions (mm)L x W x H
45249 35 Litre Tank 550 x 390 x 200
45248 48 Litre Tank 750 x 390 x 200
45256 83 Litre Tank 850 x 390 x 290
45254 93 Litre Tank 950 x 390 x 290
45252 103 Litre Tank 1050 x 390 x 290
45260 Fitting Kit For Waste Tanks
• The perfect solution to holding tanks on smaller boats and convert existing overboard discharge units.
• Made from high density Polyethylene.• Waste tank is both lightweight and sturdy. • Supplied complete with fittings.• Ready to install.
Grey Water Catchment Tray
Black/Grey Waste Tanks - CAN-SB®
45249
45248
45256
45254
45252
Waste Tank Fitting
www.samallen.com.au322
Pum
ps &
Plu
mbi
ng
Waste Tanks
Part No. Capacity (Litre) Dimensions (mm)L x W x H
45253 35 Litre Tank 550 x 390 x 200
45255 48 Litre Tank 750 x 390 x 200
45257 54 Litre Tank 850 x 390 x 200
45258 83 Litre Tank 850 x 390 x 290
• Add 100mm for clearance for hoses.• Made from high density Polyethylene. • Waste tank is both lightweight and sturdy. • Supplied complete with self priming 12V pump.• Discharge unit is ready for use.• Includes charcoal filter, vented loop, deck vent, level sensor and
indicator light.
Part No. Capacity (Litre) Dimensions (mm)A x B x C
Weight(kg) Shape
45245 60 Litre Tank 730 x 730 1.20 Square
45246 120 Litre Tank 1030 x 730 1.65 Rectangle
45247 100 Litre Tank 1100 x 1100 x 250 1.10 Triangle
• Lightweight black waste tanks.• Made from thermoplastic elastomer "plastic rubber". • Supplied complete with flange and connectors. • Flexible square, rectangle and triangle shapes.
Part No. Capacity (Litre) Dimensions (mm)L x W x H
45240 40 Litre Tank 500 x 330 x 330
45242 50 Litre Tank 600 x 330 x 330
45244 60 Litre Tank 700 x 330 x 330
• The perfect solution to holding tanks on smaller boats and convert existing overboard discharge units.
• Made from high density Polyethylene.• Waste tank is both lightweight and sturdy. • Supplied complete with fittings.• Ready to install.
Black Waste Tanks with Self Priming 12V Pump - CAN-SB®
Flexible Black Waste Tanks - CAN-SB®
Black/Grey Waste Tanks - CAN-SB®
45240
45242
45244
45247
C
B
A
45246
B
A
www.samallen.com.au323
Pumps &
Plumbing
Toilet Accessories
Part No. Description
45260 Fitting Kit For Waste Tanks
Waste Tanks Fittings
Part No. Description
45054 Active Carbon Filter for Black Waters Tank Vent's
• Active carbon filter for black waters tank vent's complete with bracket and rubber hose terminal.
• Dimensions: Ø20/25mm, Length 200mm.
Active Carbon Filter for Black Waters Tank Vents
Part No. Description
45931 Anti Syphon for Water Tanks
• Syphon complete vent valve, can be used for waste tank or liquid cooled engines to connect on the exhaust line.
• Hose diameters include 13mm, 16mm, 19mm, 22mm, 25mm, 28,5mm, 32mm and 38mm.
NOTE: Refer to "Vented Loops" on page 327 more vented loops .
Anti Syphon Vented Loop
Part No. Description
45360 Universal Waste Tank Manifold
• Universal Waste Tank Manifold used to collect grey water from sinks showers bildge pumps normally located in the lowest part of the bildge.
• Hose diameters include 13mm, 16mm, 19mm, 22mm, 25mm, 28,5mm, 32mm and 38mm.
Universal Waste Tank Manifold
Part No. Description
45300 Aquavalve Electric Valve with Control Panel - 12V
45301 Aquavalve Electric Valve with Control Panel - 24V
• The Electronic Aquavalve allows the diverting valve to be operated with the push of a button on the control panel. The indicators on the control panel show the current position of the valve. The valve has two positions 'holding tank' or 'overboard'.
• Clear indication on control panel as to current valve position.• Versatility of installation with a vast range of hose and bend adaptors.• Compatible with Manual Aquavalve adaptors.• Stainless steel fastenings.• Each valve seal tested to check no O'ring leakage.• The valve has been tested to 300 PSI.
TruDesign® Aquavalve Electronic Valve with Control Panels
www.samallen.com.au324
Pum
ps &
Plu
mbi
ng
Waste Tank Sensor Systems
Part No. Description
45302 Aqualarm Tank Sensor Switch
45304 Aqualarm Tank Sensor Panel
• The Aqualarm System provides early warning when the black water holding tank is nearly full. The system is comprised of a panel indicator and sensor switch.
• The Aqualarm System is designed to operate on 12 or 24 volt DC.• Tank Sensor Switch distance from under gasket or top of tank to
bottom of float 95mm.• Stainless Steel fastenings, internal wire tinned against corrosion.
TruDesign® Aqualarm Tank Sensor System
Part No. Description
45264 Gauge Sensor For Waste Tanks
• Gauge for black water tanks indicates when the tank is at 3/4 capacity.• 1" BSP Male thread.
Gauge Sensor For Waste Tanks
Part No. Power Battery Dimensions (mm) Cut Out A (mm)
Cut Out B (mm)
42420 60ma 12V 145 x Ø 67 Ø 52mm Ø 69mm
• This waste tank sender kit is used to detect the level of waste with in a vessels waste tank.
• LED gauge meter indicator with on/off switch.• Cable length 6m.
Sensotex® Waste Tank Level Sender Kit
BATTERY
RESISTER Note:If you are connecting the power source +24V link to the resister first
SHF - 05
6M Cable
HW - 01 (S)
+ 24V
+ 12V+_
www.samallen.com.au325
Pumps &
Plumbing
SHURflo® Macerator Pump - 12 Volt
TMC® Remote Macerator Pumps
Part No. Volt(VDC)
Amp(A) Flow Rate LPM Dimensions (mm)
L x W x H
232400 12VDC 15A 49 LPM 274 x 114 x 97
• Designed specifically for sanitation waste and fish box evacuations.• SHURflo’s Macerator pump features a premium impeller design with
run-dry capability and includes our seamless shell motor with O'ring sealed end bells and a sealed manual turn key.
• Unique dual blade and housing construction ensures problem free pumping, providing superior performance in harsh marine environments.
• Thermally Protected, CE Certified, Ignition Protected ISO 8846.• Port Size: Inlet: 1-1/2” Outlet 1”.• 1 Year Warranty.
Part No. Volt(VDC)
Amp(A) Flow Rate LPM Dimensions (mm)
L x W x H
45031 12VDC 12A 45.4 LPM 283 x 119 x 97
45032 24VDC 6A 45.4 LPM 283 x 119 x 97
SP189 Repair Kit suits 45031 & 45032
• Designed to empty marine and RV holding tanks. This pump macerates and discharges grey water and waste mixtures.
• Self priming up to 1.5 metres.• Flexible impeller pump type.• Dual-cut metal blade grinds waste. • Port Size: Inlet: 1-1/2” Outlet 1”.• Delivery head 5m (16ft).• CE Certified ISO-9001 and ISO-14001.
Macerator Pumps
Matromarine Maxi Macerator Pumps
Part No. Volt(VDC)
Amp(A) Flow Rate LPM Dimensions (mm)
L x W x H
453080 12VDC 16A 47 LPM 260 x 140 x 105
453082 24VDC 9A 47 LPM 260 x 140 x 105
• Bronze Pump Body.• 38mm Inlet.• 25mm Outlet.• Can discharge tanks up to 2100 litres.
www.samallen.com.au326
Pum
ps &
Plu
mbi
ng
Part No. Volt(VDC)
Amp(A) Flow Rate LPM Dimensions (mm)
L x W x H
45104 12VDC 7A 22LPM 369 x 168 x 144
45106 24VDC 3.5A 22LPM 369 x 168 x 144
• Single diaphragm pump designed to handle grey water waste for shower or sink drain applications.
• Self-priming pump can be run dry.• Non-choke valve, no filter required.• Can pump a mixture of air and water.• In-lined inlet and outlet valves to allow free flow of debris.• Double outlet valves to ensure continuous flow.• Adjustable clamping ring allows the head assembly to be rotated 360°
to accommodate plumbing position.• CE Certified ISO-9001 and ISO-14001.• Port Size: Inlet: 3/4” Outlet 3/4”.
Part No. Volt(VDC)
Amp(A) Flow Rate LPM Dimensions (mm)
L x W x H
45108 12VDC 7A 20LPM 369 x 168 x 144
45112 24VDC 3.5A 20LPM 369 x 168 x 144
• Single diaphragm pump designed to handle unmacerated black water toilet waste.
• Self-priming pump can be run dry.• Non-choke valve, no filter required.• Can pump a mixture of air and water.• In-lined inlet and outlet valves to allow free flow of debris.• Double outlet valves to ensure continuous flow.• Adjustable clamping ring allows the head assembly to be rotated 360°
to accommodate plumbing position.• CE Certified ISO-9001 and ISO-14001.• Port Size: Inlet: 1-1/2” Outlet 1-1/2”.
TMC® Grey Waste Diaphragm Pump - 3/4"
TMC® Black Waste Diaphragm Pump - 1-1/2”
Diaphragm Pump
Rotate ports to desired position. Pump head can be rotated and fixed in 3 positions.
www.samallen.com.au327
Pumps &
Plumbing
Vented Loops
Part No. Description
45452 19mm Vented Loop - Nylon
45453 25mm Vented Loop - Nylon
45454 38mm Vented Loop- Nylon
45328 Replacement Cap and Valve - TruDesign®
• 3 screw mounting points on the 25mm and 38mm vented loop and a single screw mounting point on the 19mm vented loop for easy installation.
TMC® Vented Loop Nylon
Part No. Description
45053 25mm Stainless Steel Vent Loop
• High quality stainless steel with brass valve.• 2 screw mounting points give secure and easy installation.• Constant internal diameter - No reduction in flow
TMC® 25mm Stainless Steel Vent Loop
42mmØ 22mm
132mm
145mm
32mm
Ø 6mm
Vented Loops prevent water siphoning from underwater skin fittings back into a vessel and thereby guard against accidental flooding and sinking. Vented loops are used predominantly in toilet to overboard applications, toilet inlet applications and holding tank to overboard applications. They can also be used in genset or small engine inlet cooling water systems. The simple one way breather valve at the top of the vented loop allows air to enter the line when not in use, thereby preventing siphoning – and yet seals when water or waste passes through the loop. The duckbill one way valve is designed to seal even when particles are present in the fluid.
Part No. Description
45325 25mm Vent Loop
45328 Replacement Cap and Valve
• Manufactured from a glass reinforced nylon composite for high strength and light weight.
• Silicone duck bill valve - Long life with no perishing or hardening.• 3 screw mounting points give secure and easy installation.• Chemical resistant - Impervious to diesel, petrol and antifouling paints.• UV resistant - These fittings will not break down with ultraviolet light
or discolour from the sun.• New Zealand made quality.
TruDesign® 25mm Vent Loop
45328
45325
Part No. Description
45323 25mm Vent Loop with 12V Solenoid
45327 12V Solenoid Suits Vented Loops
• Manufactured from a glass reinforced nylon composite for high strength and light weight.
• Robust polymer covered solenoid for long life in the marine environment.
• Diaphragm valve provides faster breaking of siphon due to larger flow rate available.
• Female threaded Solenoid Valve - No brass/bronze adapter to corrode.• 3 screw mounting points give secure and easy installation.• Chemical resistant - Impervious to diesel, petrol and antifouling paints. • New Zealand made quality.
TruDesign® 25mm Vented Loop with Solenoids
45327
45323
45328
45452
45453
45454
www.samallen.com.au328
Pum
ps &
Plu
mbi
ng
Seacocks
Part No. Description Cut out
45940 Shakewell Seacock with Cap 50mm
45942 20mm hose connector for seacock
45944 25mm hose connector for seacock
45946 38mm hose connector for seacock
• Shakewell Seacock is capable of being service while the boat is afloat.• All moving parts can be removed for servicing whilst still allowing
water to flow through the valve, no tools necessary.• Made from a resilient plastic compound which allows it to be fitted to
steel or aluminium hulls without the risk of galvanic degradation.• Quality made in Portugal.
Martwell® Shakewell Seacock
Martwell® Shakewell SeacockA seacock is a thru-hull valve and is a critical components in a boat. Their reliability can mean the difference between life and death. When the 81’ MARTELA lost her keel and capsized off Punta del Este, she remained afloat for 5 weeks thanks to the air entrapment maintained by Shakewell Seacocks. The importance of seacocks is not diminished by less dramatic circumstances: Engines, toilets and cockpit drains can all be rendered useless by malfunctioning valves. The 'weekend sailor' is as dependant upon them as the round-the-world racing skipper.
45946
45942
45944
45940
Ø 8mm
min 15mm min 15mmThick Hull Thin Hull
Instalation Options
40mm I.D
50mm O.D.
40mm I.D
50mm O.D.
Sealant
Sealant
Installation OptionsOperation Possibility
Part No. Description
45350 Aquavalve 3 Way Valve 1-1/2"BSPF - White No tails
45351 Spare Seal Kit suits 45350
45346 Small Facia suits 45350
45354 3 Way Connector - White No tails
• The Tru-Design Aquavalve has been designed to handle hot or cold water and waste treatment chemicals.
• The Valve is produced in FDA approved materials to handle drinking water but is also ideal as a diverting valve for waste water on sewerage holding or treatment systems.
• Manufactured from a glass reinforced nylon composite.• Pressure tested to 300 PSI, each valve seal tested with full service and
parts backup. • Stainless steel fasteners.• Handle position lockable.
45330 - 25mm White Connect - 3 Pack45332 - 38mm White Connect - 3 PackNOTE: Refer to "TruDesign® Aquavalve Tail Hose Connectors" on page
355
TruDesign® Aquavalve 3 Way Valve & Connectors
45346
45350
Part No. Description
45456 25mm 'Y' Valve
45457 40mm 'Y' Valve
• Easy to install bulkhead mountable.• Made of strong nylon.• Barb tails.
'Y' Valve
45354
www.samallen.com.au329
Pumps &
Plumbing
Bathroom, Shower & Laundry Fittings Stainless Steel Bathroom Accessories
Part No. Description Length(mm)
Height (mm)
Depth(mm)
Mount Holes (mm)
30358 Robe Hook 22 28 37 1 x 5
30356 Double Robe Hook 66 53 74 2 x 5
• Polished stainless steel.• Contemporary design.• Screws supplied.
Part No. Description Width(mm)
Height (mm)
Depth(mm)
Mount Holes (mm)
30354 Trapezoid Towel Holder 181 123 61 2 x 5
• Polished stainless steel.• Contemporary design.• Screws supplied.
Stainless Steel Robe Hooks
Stainless Steel Towel Holder
Stainless Steel Towel Holder
Part No. Description Length(mm)
Rail Diameter
(mm)Depth(mm)
Mount Holes (mm)
30352 Towel Rail 600mm 600 75 4 x 5
30350 Towel Rail 450mm 450 75 4 x 5
• Polished stainless steel.• Contemporary design.• Screws supplied.
Toilet Roll Holders
Part No. Description Width(mm)
Height (mm)
OA Depth(mm)
Mount Holes (mm)
30360 Toilet Roll Holder 139 99 80 2 x 5
30362 Part Recessed Toilet Roll Holder 163 163 45 4 x 5
30364 Toilet Roll Holder with Hood 133 70 92 4 x 5
• Polished stainless steel.• Contemporary design.• Screws supplied.
30358
30356
www.samallen.com.au330
Pum
ps &
Plu
mbi
ng
Stainless Steel Bathroom AccessoriesSoap Dish
Part No. Description Width(mm)
Height (mm)
Depth(mm)
Mount Holes(mm)
30368 Rectangular Soap Dish 105 51 105 2 x 5
• Polished stainless steel.• Contemporary design.• Screws supplied.
Part No. Description Width(mm)
Height (mm)
OA Depth(mm)
Mount Holes(mm)
30372 Liquid Soap Dispenser 120 210 215 4 x 5
• Polished stainless steel.• Contemporary design.• Screws supplied.
Part No. Description Width (mm)
Height (mm)
Depth(mm)
Mount Holes(mm)
30370 Toothbrush/Tumbler Holder 102 50 116 2 x 5
• Holds 6 toothbrushes.• Hole 62mm.• Polished stainless steel.• Contemporary design.• Screws supplied.
Liquid Soap Dispenser
Part No. Description Ø Dia(mm)
Depth(mm)
Mount Holes (mm)
30366 3 Metre Retractable Clothes Line 100 50 2 x 5
• Polished stainless steel.• Contemporary design.• Screws supplied.
Toothbrush / Tumbler Holder
Retractable Clothes Line
Part No. Description Dimensions (mm)
29798 Folding Stainless Steel Clothes Hook 30 x 50
• The hook is spring loaded and won't rattle when open or closed. • It is mounted via two 6 gauge counter sunk screws. • Constructed entirely from stainless steel.
Folding Stainless Steel Clothes Hook
www.samallen.com.au331
Pumps &
Plumbing
100
95 130
50
70 90
Showers
Aravon® Shower Box & Mixer with Hose & Nozzle Kit
Part No. Description
51070 Shower Box & Mixer with Hose & Nozzle Kit - Lockable
• Compact shower box and hot and cold mixer with hose and nozzle.• Lockable shower box with spare key.• Spare cover with out lock supplied. • Recess mount installation.• 1.2m hose.• Connection 3/8" BSP female thread hose.• Italian made quality.
Aravon® Sliding Rail Comp Shower & Hose
Part No. Description
51078 Shower Sliding Rail & Hose
• Italian designed shower sliding rail and hose.• Auto cleaning system shower head.• Slide rain and brackets length 600mm
mounting holes 556mm apart.• Hose length 1.5m.• Connection 3/8" BSP female thread hose.• Italian made quality.
Trem® Shower Box with Hose & Nozzle Kit
Part No. Description
51074 Compact Shower Box with Hose & Nozzle
• Recess installation shower box in ABS with shower in chromed brass.• Round shower box holder with mixer, flex, base & shower.• Case Ø70mm.• Hose length 2.5m. • Connection 3/8" BSP female thread hose.• Italian made quality.
www.samallen.com.au332
Pum
ps &
Plu
mbi
ng
Part No. Description
51010 Shower Head - White
• Shower head with PUSH / OFF / CONTINUOUS flow control.• Connection 1/2” BSP male thread.• Italian made quality.
Aravon® Shower Head
Part No. Description
51011 Compact White Shower Head - White
51009 Replacement Trigger suits 51011
• Shower head with PUSH / OFF flow control.• Connection 1/2” BSP male thread.• Italian made quality.
Aravon® Compact Shower Head
100
55
1/2”
150
55
1/2”
Aravon® Shower Head
Part No. Description
51064 Shower Head - White
• Shower head with CONTINUOUS / OFF push button and regulating spray.
• Connection 1/2” BSP male thread.• Italian made quality.
ON OFF110mm
1/2”
75mm
Double jet
100
160110
185 230
100
65 85
Showers
Aravon® Rectangle Shower Box & Mixer Kit
Aravon® Compact Round Shower Box Kit
Part No. Description
51072 Rectangle Shower Box & Mixer Kit
• Rectangle box and cover with hot and cold mixer, hose and nozzle.• Recess mount installation.• 1.2m hose.• Connection 3/8" BSP female thread hose.• Italian made quality.
Part No. Description
51071 Compact Round Shower Box Kit
• Compact round box with lid, hose and nozzle.• Recess mount installation.• 1.2m hose.• Connection 3/8" BSP female thread hose.• Italian made quality.
www.samallen.com.au333
Pumps &
Plumbing
Bathroom & Laundry Fittings
3/8”M
3/8”M
87mm
3/8”M
3/8”M
87mm
3/8”M
87mm
210mm
Part No. Description
51021 Twin Mixer with Crystal Handles
• Chrome Plated Brass (CPB) mixer.• Connections 3/8” BSP male thread for hoses with shower head.• Italian made quality.
Part No. Description
51028 Twin Mixer & Pullout Shower Head Kit
51029 Spare White Flexi Hose suits 51028
51030 Spare Crystal Handle Wheels suits 51028
• Mixer in Chrome Plated Brass (CPB) with 200cm flexi hose and shower head.
• Connection 3/8" BSP male thread hose.• Italian made quality.
Aravon® Twin Mixer with Crystal Handles
Aravon® Twin Mixer & Pullout Shower Head
Aravon® Mixer & Swivelling Faucet
Aravon® Twin Mixer Only
Aravon® Twin Mixer & Faucet
Part No. Description
51032 Mixer & Swivelling Faucet
• High quality chrome plated brass (CPB) mixer with swivelling faucet.• Connection 3/8" BSP male thread hose.• Italian made quality.
Part No. Description
51020 Twin Mixer - Only
• Chrome Plated Brass (CPB) compact mechanic mixer.• Connections 3/8” BSP male thread for hoses with shower head.• Italian made quality.
Part No. Description
51024 Twin Mixer & Faucet
• Chrome Plated Brass (CPB) compact mechanic mixer with folding pipe 10mm. Height 200mm.
• Connections 3/8" BSP male thread.• Italian made quality.
www.samallen.com.au334
Pum
ps &
Plu
mbi
ng
Bathroom, Laundry Fittings & AccessoriesAravon® Shower Flick Mixers
Part No. Description
51044 Shower Flick Mixer & Pullout Shower Head Kit
51068 Spare Ceramics Cartridge Ø 35mm with 2 Nose
51064 Spare Shower Head, 1/2" BSP Male Connection
• Single lever mixer in brass with regulating spray on the shower head and flex hose in nylon. Plastic lever.
• Ceramic cartridge Ø 35mm.• Connection 3/8" BSP female thread hose.• Italian made quality.
70mm
180mm40mm
135mm
Aravon® Ceramic Cartridge
3/8" - 1/2" Bush and Adaptor
Trem® Hand Shower Box
Aravon® Laundry Tap
Part No. Description
51068 Ceramics Cartridge 35mm with 2 Nose
• Suits all Aravon® Flick Mixers.• Italian made quality.
Part No. Description
51018 Bush Brass 3/8" BSP ID converts to 1/2" BSP OD
450012 Adaptor (CPB) 1/2" - 3/8" BSP Female
Part No. Description
51067 Rectangle Hand Shower Box
• Fits almost any size shower head and angle.• Italian made quality.
Part No. Description
51019 Laundry Tap
• Chrome plated brass (CPB) laundry tap.• Compact design.• Italian made quality.
Part No. Description
28530 Plastic Box with Lid for Shower suits 51010
• Complete with soft cap. • Shower head not included.
Plastic Box with Lid for Shower
Part No. Description
51012 Elbow Connector
• 3/8” male attack pipe fitting.
Elbow Connector
3/8”
3/8”
100
65 85
100
95 130
45001251018
www.samallen.com.au335
Pumps &
Plumbing
Aravon® Flick Mixer Short Faucet
Aravon® Flick Mixer Long Faucet
Aravon® Single Folding Tap & Faucet
Aravon® Double Folding Tap & Faucet
Single Upright Tap with Lever Action
Part No. Description
51036 Flick Mixer Short Faucet
51068 Ceramics Cartridge 35mm with 2 Nose - Spare
• Single lever compact mixer in chrome plated brass (CPB) with short revolving faucet.
• Ceramic cartridge Ø35mm.• Connections 2 x 3/8" BSP male hoses.• Italian made quality.
Part No. Description
51040 Flick Mixer Long Faucet
51068 Ceramics Cartridge 35mm with 2 Nose - Spare
• Single lever mixer in chrome plated brass (CPB) with long revolving faucet.
• Ceramic cartridge Ø35mm.• Connections 2 x 3/8" BSP male hoses.• Italian made quality.
Part No. Description
51048 Single Folding Tap & Faucet
• Brass compact single tap and lowering and folding pipe. Brass lever.• Connection 3/8" BSP male thread.• Italian made quality.
Part No. Description
51052 Double Folding Tap & Faucet
• Brass compact ceramic mixer with lowering and folding pipe. Brass lever.
• Connections 2 x 3/8" BSP male thread.• Italian made quality.
Part No. Description
51013 Single Upright Tap with Lever Action
• Chrome plated steel faucet ideal for use as a filtered water tap.• Connection 3/8" BSP male thread which suits John Guest and other
popular plumbing fitting brands.• Italian made quality.• Dimensions: H:180 x W:160
3/8”M
190
Aravon® Single Tap & Faucets
Part No. Description
51014 Right Single Tap & Faucet
51016 Left Single Tap & Faucet
• Single brass tap with left or right command and folding pipe 10mm.• Connection 3/8" BSP male thread.• Italian made quality.
51014 51016
Ø 40mm
110mm
190mm
Ø 40mm
80mm
140mm
3/8”
180mm
3/8”
180mm
58mm
Faucets & Water FiltersFaucets
www.samallen.com.au336
Pum
ps &
Plu
mbi
ng
Aravon® Shower Hose
Part No. Description
51008 Shower Hose
• 2.5m PVC reinforced hose.• Connection 1/2” BSP female x 1/2” BSP female.
Part No. Description
51060 Shower Hose suits 51044 and 51028
• 2m nylon reinforced hose.• Connection 1/2” BSP female x 3/8” BSP female.
Part No. Description
450012 1/2" - 3/8" BSP Female Adaptor
Part No. Description
51056 Shower Hose
• 2m nylon reinforced hose.• Connection 15mm male x 3/8” BSP female.
SHURflo® Electric Faucet
Part No. Description
232145 Electric Faucet, White - 12V
• Sliding Ceramic Plate Valve: Two ceramic disk plates that slide on each other. Ultra strong ceramics insure reliability and long life, as well as water flow from a trickle to a steady stream.
• Easy Installation: Complete with mounting hardware. Only 1 hole • Necessary for mounting.• 360° Rotation in 3 directions: Rotating spout allows a variety of uses. • Cold only. Hot/Cold does not rotate down.• Built-In Twist Switch 12 VDC, 4 Amps maximum.• Multiple Installation Possibilities. Use with or without an electric
pump. Mounts in any position.• High Operating Temperatures up to 176°F (80° C).• High Operating Pressures up to 87 PSI (6 Bar).• Rugged ABS Plastic Design built to withstand the real world.• • Barb size 10mm 3/8"
Trojan® Hand Pump
Ø 27mm
76mm
40mm
Aravon® Compact Single Mixer
Part No. Description
51034 Compact Single Mixer
51068 Spare Ceramics Cartridge Ø 35mm with 2 Nose
• Chrome Plated Brass (CPB) compact single mixer. • Connection 3/8”BSP male thread.• Ceramic cartridge Ø 35mm.• Italian made quality.
Part No. Description
232150 Hand Pump
• Uses 1/2" ID hose.• Extend 95mm above the bench top.• The spout extends 150mm from the centre line of the pump.• The maximum bench thickness is 30mm.• The distance from the bench top, to the bottom of the hose barb is
180mm
Faucets
450012
www.samallen.com.au337
Pumps &
Plumbing
SHURflo® Waterguard™ 11” In-Line Water Filter
SHURflo® Quick Change Water System Filter Kit
SHURflo® Quick Change Water System Filter Kit
SHURflo® Quick Change Replacement Water System Filter
Part No. Filters Up To (Gallons/Litres)
RecommendedFlow Rate Cartridge Media Chlorine
ReductionMicron Rating
23989 6000 G27000 L
0.5 GPMat 60 PSI
Granular Activated Carbon (GAC) 95% 5
• Ideal for all marine, RV and home filter applications.• Water washed coconut shell carbon increases filter efficiency.• Improves taste and reduces chlorine & odour.• Approved to meet industry standards.• Filters up to 6,000 gallons.• 2.5” X 11” (64 x 279mm) in-line filter with 1/2” (13mm) barb ends.• 1 Year Warranty.
Part No. Filters Up To (Gallons/Litres) Flow Rate Pressure
(Min/Max) Filter Size
232120 10000G37874L
2.5 GPM(11.4 LPM)
30/125 PSI(4.4/8.6 BAR) 304mm x 63mm
• Ideal for all marine, RV and Home filter applications.• Water Washed Coconut Shell Carbon increases filter efficiency.• Improves taste and reduces chlorine and odour.• Approved to meet industry standards.• 1 Year Warranty.
Kit Includes:• Quick Change Filter Kit.• 2 ea. 3/8” NPT x 1/4” JG Stem, 2 ea. 3/8” NPT-F x 1/2” NPT-M,
1 ea. 1/4” JG x 1/2” JG Stem, Winterising Diverter, Mounting Hardware.
Part No. Filters Up To (Gallons/Litres) Flow Rate Pressure
(Min/Max) Filter Size
232122 500G 1893L
0.5 GPM (1.9 LPM)
30/125 PSI(4.4/8.6 BAR) 343mm x 76mm
• Ideal for all marine, RV and Home filter applications.• Water Washed Coconut Shell Carbon increases filter efficiency.• Improves taste and reduces chlorine and odour.• Approved to meet industry standards.• 1 Year Warranty.
Kit Includes:• Quick Change Filter Kit with Faucet.• Lead-free drinking water faucet, 1/4” Plastic Tubing, 600R Filter Cartridge.• Dimensions: Tap from sink level: H:220 x W: 160
Part No. Filters Up To (Gallons/Litres) Flow Rate Pressure
(Min/Max) Filter Size
232124 10000G 37874L
2.5 GPM(11.4 LPM)
30/125 PSI(4.4/8.6 BAR) 304mm x 63mm
• Quick Change Filter Only.• Ideal for all marine, RV and Home filter applications.• Water Washed Coconut Shell Carbon increases filter efficiency.• Improves taste and reduces chlorine and odour.• Approved to meet industry standards.• 1 Year Warranty.
Water Filters
www.samallen.com.au338
Pum
ps &
Plu
mbi
ng
Fresh Water TanksCAN SB® Drinking Water Tanks
CAN SB® Flexible Water Tanks
Part No. Capacity (litre)
Length (mm)
Width (mm)
Height (mm)
45280 32 litre 450 390 200
45282 39 litre 550 390 200
45284 45 litre 650 390 200
45286 52 litre 750 390 200
45290 57 litre 550 390 290
45291 60 litre 850 390 200
45292 77 litre 750 390 290
45276 90° hose connector 3/8" thread Ø12mm fitting kit
• Drinking water tanks complete with inspection porthole.
Part No. Shape Capacity (litre)
Width (cm)
50810 Triangular 55 litre 95cm x 95cm
50800 Square 60 litre 73cm x 73cm
50802 Rectangle 100 litre 73cm x 88cm
50811 Triangular 100 litre 110cm x 110cm
50803 Rectangle 120 litre 73cm x 103cm
• Flexible water tanks are quick and easy to install in almost any space and available in triangular or square configuration.
• Made from strong Elastomer Thermoplastic, the flange is complete with all connections required to function.
• Inlet hose size 1 1/2” and 2” and an outlet hose size 5/8” and 1/2”.
45280
45282
45284
4529045291
45292
50810
50800
50802
50811
45286
50803
45276
Part No. Spare Parts
45277 38mm 900 Fitting Kit For Water Tank
45278 30mm Straight Water Tank
45279 Water Tank Port Hole And Fittings
45277 45278
45279
Water Tanks
www.samallen.com.au339
Pumps &
Plumbing
Can® is a family business producing high quality products for the marine industry. For 3 generations Can® have produced stainless steel marine products from sink, stoves, gas cookers, HOB units, ovens and dishwashers. Today the company produces innovative solutions for the Nautical environment and have built their reputation on quality and style.
Part No. Sink Shape
Dimensions L x W x H (mm)
Cut Out Dimensions L x W (mm)
Weight (kg) Faucet
50727 Round Ø 330 x 180 Ø 300 3.4 Single Faucet
50728 Oval 510 x 390 x 161 454 x 334 7.2 Double Mixer Faucet
50729 Square 360 x 360 x 180 330 x 330 4.3 Single Faucet
• Elegantly designed Round Oval and Rectangle sinks with folding tap and tempered glass cover which converts into a work surface neatly hiding the sink and faucet when not in use. All sinks include a 1-1/4” waste and plug.
• Stainless steel sink, vitro ceramic cover with folding/hiding faucet.• Italian made quality.
Part No. Sink Shape Dimensions (mm) L x W x H*
Cut Out Dimensions (mm)
L x W*Weight
(kg)
50700 Rectangle 320(A) x 260(B) x 150(C) 298(D) x 238(E) 1
50702 Rectangle 355(A) x 260(B) x 150(C) 330(D) x 235(E) 1.3
50704 Rectangle 350(A) x 320(B) x 150(C) 330(D) x 300(E) 1.5
50725 Cylindric Ø 285(A) x 180(C) Ø 260(D) 1.4
50710 Oval 382(A) x 265(B) x 130(C) 356(D) x 240(E) 1.3
50720 Round Ø 290(A) x 120(C) Ø 260(D) 0.6
50726 Round Ø 387(A) x 155(C) Ø 340(D) 1.4
• Sinks & washbasins in polished stainless steel with a 900 support edge, complete with a 1 1/4” waste and plug.
• Available in a variety of shapes and sizes all with an elegant high polished finish.
• Italian made quality.Key: *L = Length W = Width H = Height
A, B, C, D and E refer to measurements in the diagrams below .
CAN® Stainless Steel Sinks with Glass Lid and Folding Tap
CAN® Highly Polished Stainless Steel Sinks
A D
C
A D
C
A
C
D
A
C
B
E
D
50700
50727
50729
50725
50710
50720
50726
50702
50700, 50702 & 50704 50725 50710
50720 50726
50704
A E
C
D
B
Sinks
50728
Sinks & Sink Wastes
www.samallen.com.au340
Pum
ps &
Plu
mbi
ng
Part No. Description
50705 Rectangular Double Stainless Steel 600 x 320
• Sinks & washbasins in polished stainless steel with a 900 support edge, complete with a 1 1/4” waste and plug.
• Available in a variety of shapes and sizes all with an elegant high polished finish.
• Italian made quality.• Dimensions: Length 600mm, Width 320mm.
Part No. Description
51710 Height: 180mm Diameter: 360mm 1 Burner: 1 Dual 4500w
51700 Height: 180mm Diameter: 380mm 2 Burners: 1 Rapid & 1 auxiliary
• High quality Stainless Steel Sink comes complete with 1 or 2 burners, Stainless Steel flap hob unit / pan holder and folding faucet. The hob is complete with temperate glass lid.
• Italian made quality.
Part No. Description
50410 Complete 1"(25mm) Sink Waste with Plug
50411 1"(25mm) Rubber Plug Only
50412 1" Sink Waste Only (No Plug)
50414 Complete 1" (25mm) Right Angle Sink Waste with Plug
CAN® Highly Polished Double Stainless Steel Sink
Highly Polished Stainless Steel Sink with Tap, Cover & Burner
25mm Sink Wastes & Plugs
Part No. Description Hose Dia Thread
50730 Discharge straight hose nipple 1” (25mm) 1-1/4"
50731 Discharge 90 Degree Elbow 1” (25mm) 1-1/4"
• 1 1/4” Thread x 1” (25mm) hose connectors to suit all stainless steel sinks and basins.
• Suits 50731.
Hose Connectors
5073050731
Part No. Description Cutout Thread
50732 Straight spare waste with cap 53mm 1-1/4"
• 1 1/4” Thread x 1” (25mm) hose connectors to suit all stainless steel sinks and basins.
• Used with 50730 or 50731.
Sink Waste
50410 50411
50412
50414
Sinks & Sink Wastes
www.samallen.com.au341
Pumps &
Plumbing
HosesGeneral Purpose & Washdown Hoses
Part No. Description
76320 Ø 13mm ID x 20m Braided PVC Hose - Roll
76322 Ø 16mm ID x 20m Braided PVC Hose - Roll
76324 Ø 20mm ID x 20m Braided PVC Hose - Roll
76326 Ø 25mm ID x 20m Braided PVC Hose - Roll
• The Super Braided Hose has a high cycle life particularly effective in the harsh sea water environment of ocean going vessels.
• Extreme durability and performance.• Braided Hose is ideal for supplying water, oil based liquids and
chemical agents.• Meets AS2070 Australian Standard. • Sold per roll no cut lengths available.
NOTE: Not recommended for drinking water .
Part No. Description
WD012 Ø 12mm ID White Washdown Hose - Per Metre
WD020 Ø 20mm ID White Washdown Hose - Per Metre
WD025 Ø 25mm ID White Washdown Hose - Per Metre
WD032 Ø 32mm ID White Washdown Hose - Per Metre
• Lightweight hose ideal for on board, mariners washdown and fender for small boats.
• White with blue stripe, super flexible water delivery hose.• Non marking.• Sold per metre.
NOTE: Not recommended for drinking water .
Part No. Description
23748 7.6m White Coil Hose - 1/2" NPT Connection
• Designed to clean delicate and hard to reach areas on boats and RVs. • The coiled hose can be stored neatly in compact areas. • Advanced designed coils are kink resistant, strong and durable and will
maintain their coiled shape, even when stretched to their maximum length.
• Includes a quick connect hose fittings.• Used with BSP connectors.• Tested up to 300psi.• 1 Year Warranty.
NOTE: Refer to "SHURflo® Hose Nozzle and Coil Hose" on page 292 for nozzle .
PVC Super Braided Hoses
PVC Water Ace Hoses
SHURflo® Washdown Coil Hoses
20m Roll
Per Metre
Blister Pack
www.samallen.com.au342
Pum
ps &
Plu
mbi
ng
Drinking Water Hoses
Part No. Description
V2007 Ø 6mm ID x 20m Hose - Roll
V2008 Ø 8mm ID x 20m Hose - Roll
V2009 Ø 10mm ID x 20m Hose - Roll
V2010 Ø 12mm ID x 20m Hose - Roll
V2011 Ø 16mm ID x 20m Hose - Roll
V2012 Ø 20mm ID x 20m Hose - Roll
V2013 Ø 25mm ID x 20m Hose - Roll
V2014 Ø 32mm ID x 20m Hose - Roll
V2015 Ø 38mm ID x 20m Hose - Roll
V2016 Ø 50mm ID x 20m Hose - Roll
• Translucent braided hose that can be used for air, water, petrol & food contact. Up to 230 PSI.
• Meets AS2070 Australian Standard.
Part No. Description
76300 12mm ID x 20m Hose - Roll
76302 12mm ID x 10m Hose with 2 Quick Connect Fittings - Roll
• Marine and RV drinking water hose made from food grade polyethylene to comply with NSF food grade international certification.
• 76302 includes a 1/2" and 3/4" BSP quick connect fittings.
NOTE: Hose sold in rolls only (No cut to length available) .
Part No. Description
V2000A Ø 5mm ID x 30m Hose - Roll
V2000B Ø 6mm ID x 30m Hose - Roll
V2000C Ø 8mm ID x 30m Hose - Roll
V2002 Ø 16mm ID x 30m Hose - Roll
V2005 Ø 32mm ID x 30m Hose - Roll
V2006 Ø 40mm ID x 30m Hose - Roll
V2017 Ø 50mm ID x 30m Hose - Roll
• Meets the AS2070 Australian Standard food contact requirements. • Suitable for food and beverage contact as well as low pressure general
purpose delivery.
Part No. Description
76364 Ø 10mm ID x 100m Hose - Reel
76366 Ø 13mm ID x 50m Hose - Reel
76370 Ø 19mm ID x 30m Hose - Roll
76372 Ø 25mm ID x 30m Hose - Roll
76374 Ø 32mm ID x 30m Hose - Roll
• Suitable for food and beverage contact as well as low pressure general purpose delivery.
• Meets the AS2070 Australian Standard food contact requirements.
NOTE: Not sold per metre .
Polyethylene Ø12mm Drink Water Hoses
CVT Clear Vinyl Tubing
CVT Clear Vinyl Tubing - Reel and Roll Only
TPR Petrol Resistant & Food Contact Hoses
Per Roll
Per Roll
Per Roll
Reel and Roll
76302
76300
www.samallen.com.au343
Pumps &
Plumbing
Grey Water & Bilge Pump Hose
Part No. DescriptionWorking Pressure W.P. - PSI
76330 Ø 19mm ID x 20m Marine Flexible Hose - Roll 142 PSI
76333 Ø 25mm ID x 10m Marine Flexible Hose - Roll 142 PSI
76332 Ø 25mm ID x 20m Marine Flexible Hose - Roll 142 PSI
76334 Ø 28mm ID x 20m Marine Flexible Hose - Roll 128 PSI
76336 Ø 32mm ID x 20m Marine Flexible Hose - Roll 114 PSI
76338 Ø 38mm ID x 20m Marine Flexible Hose - Roll 114 PSI
76340 Ø 50mm ID x 20m Marine Flexible Hose - Roll 100 PSI
• The Marine/RV Flexible is ideal for supplying water, oil based liquids and chemical agents perfect for the harsh sea water environment of ocean going vessels.
• Light weight and flexible. • Kink and crush resistance.• Supplied in Rolls (No cut lengths).
NOTE: Not recommended for drinking water .
Part No. DescriptionWorking Preasure W.P. - PSI
76346 Ø 12mm ID x 20m Clear Spring Hose - Roll 101 PSI
76348 Ø 15mm ID x 20m Clear Spring Hose - Roll 87 PSI
76350 Ø 19mm ID x 20m Clear Spring Hose - Roll 72 PSI
76352 Ø 25mm ID x 20m Clear Spring Hose - Roll 58 PSI
76356 Ø 32mm ID x 20m Clear Spring Hose - Roll 58 PSI
76358 Ø 38mm ID x 20m Clear Spring Hose - Roll 58 PSI
76360 Ø 50mm ID x 20m Clear Spring Hose - Roll 43 PSI
• The Super spring hose has a high cycle of life with convincing durability and performance and is particularly effective in low temperature environments.
• It is ideal for supplying water; oil based liquids and is chemical resistant.
• With its super transparent body any blockages can be easily located. • Shock resistant, moderately flexible, kink and crush resistant.• Supplied in Rolls (No cut lengths).
NOTE: Not recommended for drinking water .
Part No. Description
76440 Ø 20mm (3/4") ID x 15m Black Cuffed Poly Hose - Roll
76442 Ø 28mm (1 1/8") ID x 15m Black Cuffed Poly Hose - Roll
• Economical black plastic bilge pump discharge hose.• Clamp Cuffs every foot for easy clamping. • Available in 20mm (3/4") or 28mm (1 1/8") hose.• Supplied in 15m rolls (No cut lengths).
NOTE: Not recommended for drinking water .
Marine/RV Flexible Hoses
PVC Clear Spring Hoses
Black Cuffed Poly Hoses
Per Roll
Per Roll
Per Roll
www.samallen.com.au344
Pum
ps &
Plu
mbi
ng
Sanitation Hose
Part No. Description
76180 Ø 25mm ID x 30m White Sanitation Hose - Per Metre
76182 Ø 38mm ID x 30m White Sanitation Hose - Per Metre
• Flexible strong anti-odour rubber hose designed for sewage pipes and marine toilets, providing an odour free toilet system.
• Temperature range: 40°C - 120°C• The hose is made of special butyl compound which prevent odour
spread and bacteria growth.• Resistant to all detergents and disinfectants.• Very flexible and easy to install. • Italian made quality.• 5 Year Warranty.• Price per metre.
Part No. Description
76220 Ø 20mm ID x 30m White Sanitation Hose - Roll
76225 Ø 25mm ID x 30m White Sanitation Hose - Roll
76238 Ø 38mm ID x 30m White Sanitation Hose - Roll
• Extremely flexible PVC hose designed as sewage pipe for marine toilets. Temperature range: -15°C +60°C
• Smooth white PVC hose.• Impact and crush resistant steel wire helix reinforcement.• Weather and most chemical resistant white PVC cover.• Italian made quality.• Supplied in Rolls (No cut lengths).
Part No. Description
76224 Ø 25mm ID x 15m Sanitation Hose - Roll
• Extremely flexible PVC hose designed as sewage pipe for marine toilets.
• Smooth white PVC hose.• Impact and crush resistant.• Weather and most chemical resistant.• Supplied in Rolls (No cut lengths).
Part No. Description
HPD20 Ø 20mm ID x 20m White Reinforced Hose - Roll & Per Metre
HPD25 Ø 25mm ID x 20m White Reinforced Hose - Roll & Per Metre
HPD40 Ø 40mm ID x 20m White Reinforced Hose - Roll & Per Metre
• Ideal for marine toilet installations. A flexible reinforced smooth bore pressure hose. Also great for a washdown hose.
• Available per metre and 20m rolls.
Sanipomp/Extra Hose Rubutyl
PVC White Sanitation Hoses
PVC White Sanihose
White Heavy Duty Flexible Hoses
Per Metre
Per Roll
Per Roll
Per Metre or 20m Roll
Wire helix reinforcement
www.samallen.com.au345
Pumps &
Plumbing
Eco Hoses, Ventilation Hose & Quick Connect Hose
Part No. DescriptionWorking Pressure W.P. - PSI
76738 Ø 38mm ID x 100m Eco Lay Flat Hose - Roll 115 PSI
76750 Ø 50mm ID x 100m Eco Lay Flat Hose - Roll 100 PSI
76763 Ø 63mm ID x 100m Eco Lay Flat Hose - Roll 70 PSI
76775 Ø 75mm ID x 100m Eco Lay Flat Hose - Roll 71 PSI
76710 Ø 100mm ID x 100m Eco Lay Flat Hose - Roll 56 PSI
76715 Ø 150mm ID x 100m Eco Lay Flat Hose - Roll 42 PSI
76720 Ø 200mm ID x 100m Eco Lay Flat Hose - Roll 42 PSI
• Eco Flat Hose has been designed using EVA (ethylene vinyl acetate).• EVA is a chlorine free alternative to PVC and has been proven to have a
substantially less harmful impact on the environment.• The use of EVA also maximises desired properties beyond levels
obtainable in standard PVC such as low temperature, toughness, abrasion resistance, low extractability, chemical resistance, ultimate elongation and hot melt strength.
• The Eco Flat Hose can be run through high traffic areas without causing obstruction and stores neatly in compact areas.
• Supplied in Rolls (No cut lengths). NOTE: Not recommended for drinking water .
Part No. Description
450016 12/9mm Red (Hot Water) Polyethylene Hose 50m Roll
450018 12/9mm Blue (Cold Water) Polyethylene Hose 50m Roll
450013 Hose Retainers
• Colour coded hose types for quick identification of hot and cold water plumbing.
• Designed for use with 12mm Quick Release Connectors.• Hose retainer helps keep you plumbing tidy.
NOTE: Recommended for use with CanSB® Quick Release Connector - Hot & Cold Water Fittings.
Part No. Description
765000 75mm x 3mtr Ventilation Ducting Hose - White
765002 75mm x 15mtr Ventilation Ducting Hose - Black
765004 100mm x 3mtr Ventilation Ducting Hose - White
765006 100mm x 15mtr Ventilation Ducting Hose - White
• Flame resistant PVC ducting designed for venting bilge gases.• Ozone UV resistant.• For blowers refer to "Blowers" on page 311
EVA Eco Lay Flat Hoses
CanSB® Hot & Cold Hose for Quick Release Connectors
Ventilation Hose
Per Roll
450013
450016
450018
www.samallen.com.au346
Pum
ps &
Plu
mbi
ng
Plumbing Fittings
Universal Joiner
Quick Connect Fittings
Part No. Description
29643 32mm (1 1/4") BSPT Waste Camlock Connector Nylon
29642 40mm (1 1/2") BSP Waste Camlock Connector Poly
Part No. Description
450002 12mm T Hose Connector
450003 12mm Straight Hose Connector
450004 12mm 90° Hose Connector
450005 12mm Y Hose Connector
450006 12mm 3/8" BSP Hose Connector
450007 12mm 1/2" BSP Hose Connector
450009 12mm 1/2" BSP 90° Hose Connector
450010 12mm 3/8" BSP Female Thread Hose Connector
450011 12mm 1/2" BSP Female Thread Hose Connector
450012 1/2" to 3/8" BSP Female Thread Hose Connector
• Quick release connector for hot and cold water plumbing fittings.• Max Pressure: 10 Bar.• Max Temp: 70°C.
NOTE: Recommended for use with CanSB® Hot & Cold Water Hose .
Waste Camlock Connectors
CanSB® Quick Release Connector - Hot & Cold Water Fittings
450004450002 450003
450009450005 450006 & 450007
450010 & 450011 450012
Part No. Description
45358 13mm - 38mm Universal Connector
45359 31mm- 58mm Universal Connector
• Designed to make hose reduction easy.
CAN SB® Universal Joiner
50mm 1-15/16"
45mm 1-3/4"
39mm 1-9/16"
31mm 1-1/4"
58mm 2-3/8"
45359
38mm 1-1/2"
22mm 7/8"
19mm 3/4"
16mm 5/8"
13mm 1/2"
32mm 1-1/4"
28.5mm 1-1/8"
25mm 1"
45358
www.samallen.com.au347
Pumps &
Plumbing
Skin Fittings
Part No. Tail Ø BSP Thread Length
45760 5/8" (16mm) 22mm
45761 3/4" (20mm) 26mm
45762 1" (25mm) 28mm
45763 1-1/8" (28mm) 28mm
45764 1-1/4" (32mm) 32mm
45765 1-1/2" (38mm) 30mm
• Short length 316G stainless steel thru-hull connection skin fitting and barb tail.
• Flange is machined to fit hull and groove to retain bedding compound.• For thin hull sections up to 5/8” maximum. • Skin fitting includes nut.
Part No. Tail Ø BSP Thread Length
45770 1/2" (16mm) 45mm
45771 3/4" (20mm) 45mm
45772 1" (25mm) 45mm
45773 1-1/8" (28mm) 45mm
45774 1-1/4" (32mm) 50mm
45775 2" (38mm) 50mm
• Nylon thru-hull connection skin fitting and barb tail, 316 grade stainless steel trim plate.
• Skin fitting and tail is glass reinforced nylon compound.• For thin hull sections up to 5/8” maximum.• Skin fitting includes nut.
Stainless Steel Skin Fitting with Tail
Nylon Skin Fittings With Tail, Stainless Steel Trim
Part No. Tail Ø BSP Thread Length Angle
45780 3/4" (20mm) 20mm 90°
45781 1-1/8" (28mm) 45mm 90°
45783 1-1/2" (38mm) 45mm 90°
• 90° nylon thru-hull connection skin fitting and barb tail, 316 grade stainless steel trim plate.
• Skin fitting and tail is glass reinforced nylon compound.• Skin fitting includes nut.
90° Nylon Skin Fitting with Tail, Stainless Steel Trim
Part No. Tail Ø BSP Thread Length Angle
45462 1" (25mm) 20mm 100°
• Suits 1 " hose
100° White Nylon Skin Fitting
www.samallen.com.au348
Pum
ps &
Plu
mbi
ng
Skin Fittings
Nylon Skin Fittings with BSP Thread with Tail
Skin Fittings with Nuts
Part No. Tail Ø BSP Thread Length
45435 1/2" (12mm) 50mm
45440 5/8" (16mm) 49mm
45450 3/4" (20mm) 55mm
45460 1" (25mm) 55mm
45470 1-1/4" (32mm) 55mm
45480 1-1/2" (38mm) 53mm
45482 2" (50mm) 58mm
• Acetal thru-hull connection skin fitting with BSP thread and barb tail.• For use with Ball Valves & Gate Valves.• UV resistant.• Skin fitting includes nut.
Spare Nuts to suit Acetal Skin Fittings
Part No. Description
45435B 1/2" BSP Thread Acetal Nut suits Skin Fittings
45440B 5/8" BSP Thread Acetal Nut suits Skin Fittings
45450B 3/4" BSP Thread Acetal Nut suits Skin Fittings
45460B 1" BSP Thread Acetal Nut suits Skin Fittings
45470B 1-1/4" BSP Thread Acetal Nut suits Skin Fittings
45480B 1-1/2" BSP Thread Acetal Nut suits Skin Fittings
• Spare nut replacement for 45435, 45440, 45450, 45460, 45470 and 45480.
Acetal Skin Fittings with BSP Thread with Tail
Part No. Tail Ø BSP Thread Length
45435A 1/2" & 5/8" (12mm & 16mm) 35mm
45450A 3/4" (20mm) 52mm
45460A 1" (25mm) 52mm
45465A 1-1/8" (28mm) 53mm
45470A 1-1/4" (32mm) 53mm
45480A 1-1/2" (38mm) 53mm
• Nylon thru-hull connection skin fitting with BSP thread and barb tail.• For use with Ball Valves & Gate Valves• Skin fitting includes nut.
Part No. Description Thread Length
450050 3/4" BSP Thread Black Nylon Skin Fitting 60mm
450051 1" BSP Thread Black Nylon Skin Fitting 60mm
450052 1-1/4" BSP Thread Black Nylon Skin Fitting 75mm
450053 1-1/2" BSP Thread Black Nylon Skin Fitting 75mm
450054 2" BSP Thread Black Nylon Skin Fitting 80mm
• Black nylon thru-hull connection skin fitting are moulded from nylon glass reinforced polymer which dramatically increases strength, stiffness and light weight.
• Designed to be installed below water line.• Chemical resistance.• UV resistant.• Can be painted over.• New Zealand made quality.• Skin fitting includes nut.
TruDesign® Black Nylon Below Water Skin Fittings
www.samallen.com.au349
Pumps &
Plumbing
23042
Part No. Description Thread Length
23038 3/4” 20mm BSP Bronze Thru-hull Pickups 65mm
23039 3/4” 20mm BSP Alloy Thru-hull Pickups 65mm
23040 3/4” 20mm BSP Nylon Thru-hull Pickups 65mm
23042 3/4” 20mm BSP 316G Stainless Steel Thru-hull Pickups 65mm
Thru-hull Pickups
23038 23039 23040
Part No. Description
45071 3/4" BSP Thread Stainless Steel Skin Fitting Scoop
45072 1" BSP Thread Stainless Steel Skin Fitting Scoop
45074 1-1/2" BSP Thread Stainless Steel Skin Fitting Scoop
45075 2" BSP Thread Stainless Steel Skin Fitting Scoop
29514 3/4" BSP Thread Bronze Skin Fitting Scoop
29516 1" BSP Thread Bronze Skin Fitting Scoop
• 316G stainless steel thru-hull connection skin fitting scoop and BSP thread tail.
• Skin fitting includes nut.
Part No. Description
45465 90° Nylon Thru-hull suits 1/2" - 3/4" (12mm-16mm) Hose
45466 90° Nylon Thru-hull suits 3/4" (20mm) Hose
45467 90° Nylon Thru-hull suits 5/8" (16mm) Hose
Skin Fitting Scoop - Threaded
90° Nylon Thru-hull Tail
Skin Fittings & Thru-hull Pickups
45465 & 4546645467
Part No. Thread Thread Length
45060 1/2" BSP 60mm
45061 3/4" BSP 69mm
45062 1" BSP 88mm
45063 1-1/4" BSP 77mm
45064 1-1/2" BSP 77mm
45065 2" BSP 93mm
• 316G stainless steel thru-hull connection skin fitting and BSP thread.• Skin fitting includes nut.
Stainless Steel Skin Fittings with BSP Thread
Part No. Dimensions
29208 1/2" BSP
29210 3/4" BSP
29212 1" BSP
29214 1-1/4" BSP
29216 1-1/2" BSP
29218 2" BSP
29220 2-1/2" BSP
29222 3" BSP
29224 3-1/2" BSP
29226 4" BSP
Bronze Skin Fittings with BSP Thread
Part No. Dimensions
29208A 1/2" BSP
29210A 3/4" BSP
29212A 1" BSP
29214A 1-1/4" BSP
29216A 1-1/2" BSP
29218A 2" BSP
Replacement BronzeNut
45071 - 45075 29514 - 29516
www.samallen.com.au350
Pum
ps &
Plu
mbi
ng
Part No. Description
45120 1/2" 15mm BSP Bronze Gate Valve
45121 3/4" 20mm BSP Bronze Gate Valve
45122 1" 25mm BSP Bronze Gate Valve
45123 1-1/4" 32mm BSP Bronze Gate Valve
45124 1-1/2" 38mm BSP Bronze Gate Valve
45125 2" 50mm BSP Bronze Gate Valve
• Marine grade bronze gate valves with full bore ports. • Parallel Thread.
Part No. Description
45130 3/8" 10mm BSP 3 Way L/Port Valve
45131 1/2" 15mm BSP 3 Way L/Port Valve
45132 3/4" 20mm BSP 3 Way L/Port Valve
45133 1" 25mm BSP 3 Way L/Port Valve
45134 1-1/4" 32mm BSP 3 Way L/Port Valve
45135 1-1/2" 38mm BSP 3 Way L/Port Valve
• Three Way Chrome Plated Brass Ball Valves. • Provides two different flow directions and is perfect for control of a
separate fuel tank.• Nickel plated handle.
Bronze Gate Valves
Chrome Plated Brass 'L' Port Ball Valves
Valves
Part No. Description
45414 1/2" 15mm BSP Thread Cast Brass Gate Valve
45416 3/4" 20mm BSP Thread Cast Brass Gate Valve
45418 1" 25mm BSP Thread Cast Brass Gate Valve
45419 1-1/4" 32mm BSP Thread Cast Brass Gate Valve
45420 1-1/2" 38mm BSP Thread Cast Brass Gate Valve
45421 2" 50mm BSP Thread Cast Brass Gate Valve
• Brass body with full bore ports.
Brass Gate Valves
Part No. Description
45136 3/8" BSP 3 Way T/Port Valve
45137 1/2" BSP 3 Way T/Port Valve
45138 3/4" BSP 3 Way T/Port Valve
45139 1" BSP 3 Way T/Port Valve
45140 1-1/4" BSP 3 Way T/Port Valve
• Three Way Chrome Plated Brass Ball Valve. • Provides two different flow directions and is perfect for control of a
separate fuel tank. • Nickel plated handle.
Chrome Plated Brass 'T' Port Ball Valves
www.samallen.com.au351
Pumps &
Plumbing
Part No. Description
45142 3/8" BSP Brass Ball Valve
45143 1/2" BSP Brass Ball Valve
45144 3/4" BSP Brass Ball Valve
45145 1" BSP Brass Ball Valve
45146 1-1/4" BSP Brass Ball Valve
45147 1-1/2" BSP Brass Ball Valve
45148 2" BSP Brass Ball Valve
• Chrome plated brass ball valve ideal for all fuel line installations.• Corrosion resistant handle.• Parallel thread.
Part No. Description
45160 1/2" BSP Bronze Ball Valve
45161 3/4" BSP Bronze Ball Valve
45162 1" BSP Bronze Ball Valve
45163 1-1/4" BSP Bronze Ball Valve
45164 1-1/2" BSP Bronze Ball Valve
45165 2" BSP Bronze Ball Valve
• High quality noncorrosive ball valve with a stainless steel nut and handle.
• Full bore parallel female BSP threaded ports.
Chrome Plated Brass Ball Valves
Bronze Ball Valves
Valves
Part No. Description
45544 3/8" BSP Stainless Steel Ball Valve
45545 1/2" BSP Stainless Steel Ball Valve
45546 3/4" BSP Stainless Steel Ball Valve
45547 1" BSP Stainless Steel Ball Valve
45548 1-1/4" BSP Stainless Steel Ball Valve
45549 1-1/2" BSP Stainless Steel Ball Valve
45550 2" BSP Stainless Steel Ball Valve
45551 2-1/2" BSP Stainless Steel Ball Valve
45552 3" BSP Stainless Steel Ball Valve
• High quality noncorrosive 316 grade stainless steel ball valves. • Full bore parallel female BSP threaded ports.
Stainless Steel Ball Valve
Part No. Description
45180 15mm Compact PVC Ball Valve
45181 20mm Compact PVC Ball Valve
45182 25mm Compact PVC Ball Valve
45183 32mm Compact PVC Ball Valve
45184 40mm Compact PVC Ball Valve
45185 50mm Compact PVC Ball Valve
• Compact style noncorrosive PVC ball valve with large handle. • Full bore parallel female BSP threaded ports.
Compact PVC Ball Valves
www.samallen.com.au352
Pum
ps &
Plu
mbi
ng
Valves
Part No. Description
450071 3/4" BSP Nylon Ball Valve
450072 1" BSP Nylon Ball Valve
450073 1-1/4" BSP Nylon Ball Valve
450074 1-1/2" BSP Nylon Ball Valve
450075 2" BSP Nylon Ball Valve
• Manufactured from a glass reinforced nylon composite.• Immune to corrosion and electrolysis with a long service life.• Chemical resistant - Impervious to diesel, petrol and antifouling
paints.• UV resistant.• Large operating temperature range (-20° to 80°C).• Standards approved through IMCI & Bureau Veritas to ISO
Standard 9093-2.
Part No. Description
450080 3/4" BSP Nylon Ball Valve
450086 1" BSP Nylon Ball Valve
450087 1-1/4" BSP Nylon Ball Valve
450088 1-1/2" BSP Nylon Ball Valve
• Position Monitored - Able to be used as an engine interlock. Monitoring of multiple Ball Valve positions through the 450090 Panel Display.
• Manufactured from a glass reinforced nylon composite.• Immune to corrosion and electrolysis with a long service life.• Chemical resistant - Impervious to diesel, petrol and antifouling
paints.• UV resistant.• Large operating temperature range (-20° to 80°C).• Standards approved through IMCI & Bureau Veritas to ISO
Standard 9093-2.
Part No. Description
450090 Seacock Monitor Panel
• Monitoring from an accessible location.• Indication of multiple Ball Valve positions.• Able to be used as an engine interlock to disable starting when
closed.
TruDesign® Nylon Ball Valves
TruDesign® Position Monitored Nylon Ball Valves
TruDesign® Seacock Monitor Panel
Spanner for TruDesign® Ball Valves
Part No. Description
45340 Spanner for TruDesign® Ball Valves 3/4" & 1"
45342 Spanner for TruDesign® Ball Valves 1-1/4" & 1-1/2"
45334 Spanner for TruDesign® Joiners (Nylon)
• Spanner for tighten TruDesign® Ball Valves to a maximum of 16mm (12ft/lbs).
• Manufactured from a glass reinforced nylon composite.
45334
45340 & 45342
www.samallen.com.au353
Pumps &
Plumbing
Valves & Connectors
Part No. Description
45190 2 Way Shut Off 'Y' Valve suits 1/2" Hose
45191 2 Way Shut Off 'Y' Valve suits 3/4" Hose
• Compact style noncorrosive PVC ball valve with large handle. • Full bore parallel female BSP threaded ports.
Part No. Description
45193 Small ON/OFF Tap suits 1/2" Hose
45194 Small ON/OFF Tap suits 3/4" Hose
45195 Small ON/OFF Tap suits 1" Hose
• Compact style noncorrosive PVC ball valve with large handle. • Full bore parallel female BSP threaded ports.
2 Way Shut Off 'Y' Valves
Small ON/OFF Taps
Part No. Description
45354 3 Way Connector - White No tails
• An assortment of tails can be fitted to the Aquavalve 3 Way Connector making it extremely versatile
TruDesign® Aquavalve 3 Way Connector
316G Stainless Steel Male Hose Joiners
Part No. Dimensions Tail Ø
45628 3/8" BSP Male 10mm
45629 1/2" BSP Male 15mm
45630 3/4" BSP Male 20mm
45631 1" BSP Male 25mm
45632 1-1/4" BSP Male 32mm
45633 1-1/2" BSP Male 40mm
45634 2" BSP Male 50mm
• 316G Stainless Steel
316G Stainless Steel Female Hose Joiners
Part No. Dimensions Tail Ø
45638 1/2" BSP Female 15mm
45639 3/4" BSP Female 20mm
45640 1" BSP Female 25mm
45641 1-1/4" BSP Female 32mm
45642 1-1/2 BSP Female 40mm
45643 2" BSP Female 50mm
• 316G Stainless Steel
www.samallen.com.au354
Pum
ps &
Plu
mbi
ng
Bronze Straight Male BSP Hose Tail
Part No. Description
29192 1/2" BSP Male
29194 3/4" BSP Male
29196 1" BSP Male
29198 1-1/4" BSP Male
29200 1-1/2" BSP Male
29202 2" BSP Male
29207 2-1/2" BSP Male
Bronze Reducer Male BSP To Hose Tail
Part No. Dimensions Tail Ø
29193 1/2" BSP Male 3/4"
29195 3/4" BSP Male 1"
Brass Hex Sockets
Brass Nipples
Part No. Description
45310 15mm Hex Socket
45312 20mm Hex Socket
45314 20mm Hex Socket
• Brass Hex Nipples-female BSP to female BSP
Part No. Description
29201 1/2" Brass Nipple
29203 3/4" Brass Nipple
29204 1" DR Brass Nipple
29205 1-1/4" Brass Nipple
29206 1-1/2" Brass Nipple
• Brass Hex Nipples-Male BSP to Male BSP
Bronze 90o Male BSP To Hose Tail
Part No. Description
29504 3/4" BSP Male
29506 1" BSP Male
29508 1-1/4" BSP Male
29509 1-1/4" BSP Male - 1-1/2" Hose Tail
29510 1-1/2" BSP Male
29512 2" BSP Male
Connectors
www.samallen.com.au355
Pumps &
Plumbing
ConnectorsTruDesign® Aquavalve Tail Hose Connectors
Part No. Dimensions
45330 25mm White Connect - 3 Pack
45332 38mm White Connect - 3 Pack
• Long tail feature - The use of 2 hose clamps is recommended for secure hose fitting
• Manufactured from a glass reinforced nylon composite.• Immune to corrosion and electrolysis for long service life.• Chemical resistant - Impervious to diesel, petrol and antifouling paints.• UV resistant, suitable for all marine environments.• Large operating temperature range from -20°C to +110°C.
TruDesign® Connector Threaded
Part No. Dimensions
45333 1-1/2" BSP to 1-1/2" BSP PVC Pipe Adaptor
• Manufactured from a glass reinforced nylon composite.• Immune to corrosion and electrolysis for long service life.• Chemical resistant - Impervious to diesel, petrol and antifouling paints.• UV resistant, suitable for all marine environments.• Large operating temperature range from -20°C to +110°C.
TruDesgin 90o Elbow Hose Joiners
Part No. Dimensions
450100 25mm Elbow Joiner
450102 38mm Elbow Joiner
• Manufactured from a glass reinforced nylon composite.• Immune to corrosion and electrolysis for long service life.• Chemical resistant - Impervious to diesel, petrol and antifouling paints.• UV resistant, suitable for all marine environments.• Large operating temperature range from -20°C to +110°C.
TruDesgin Hose Joiners
Part No. Dimensions Tail Ø
450120 1-1/2" BSP Male 19mm
450122 1-1/2" BSP Male 25mm
450124 1-1/2" BSP Male 32mm
450126 1-1/2" BSP Male 38mm
• Manufactured from a glass reinforced nylon composite.• Immune to corrosion and electrolysis for long service life.• Chemical resistant - Impervious to diesel, petrol and antifouling paints.• UV resistant, suitable for all marine environments.• Large operating temperature range from -20°C to +110°C.
Part No. Description
45336 38mm - 1-1/2" BSP 90 Deg Bend White
45338 38mm - 1-1/2" 120 Deg Bend White
• Long tail feature - The use of 2 hose clamps is recommended for secure hose fitting
• Manufactured from a glass reinforced nylon composite.• Immune to corrosion and electrolysis for long service life.• Chemical resistant - Impervious to diesel, petrol and antifouling paints.• UV resistant, suitable for all marine environments.• Large operating temperature range from -20°C to +110°C.
TruDesign® Aquavalve Tails 90° & 120° Hose Joiners
45338
45336
www.samallen.com.au356
Pum
ps &
Plu
mbi
ng
Connectors
Part No. Dimensions Tail Ø
450104 1-1/4" BSP Female 1 1/4" BSP Male
450106 1-1/2" BSP Female 1 1/2" BSP Male
• Manufactured from a glass reinforced nylon composite.• Immune to corrosion and electrolysis for long service life.• Chemical resistant - Impervious to diesel, petrol and antifouling paints.• UV resistant, suitable for all marine environments.• Large operating temperature range from -20°C to +110°C.
TruDesgin® Nylon 900 Female BSP To Male BSP Joiners
Part No. Dimensions Tail Ø
450114 1 1/4" BSP Male 38mm
• Manufactured from a glass reinforced nylon composite.• Immune to corrosion and electrolysis for long service life.• Chemical resistant - Impervious to diesel, petrol and antifouling paints.• UV resistant, suitable for all marine environments.• Large operating temperature range from -20°C to +110°C.
TruDesgin® Nylon 900 Male BSP Hose Joiner
TruDesign® Nylon 90° Elbow Hose Joiners
Part No. Type Dimensions
450060 Tail 19mm 3/4" BSP 90° Elbow
450061 Tail 25mm 1" BSP 90° Elbow
450062 Tail 32mm 1-1/4" BSP 90° Elbow
450063 Tail 38mm 1-1/2" BSP 90° Elbow
450064 Tail 50mm 2" BSP 90° Elbow
• Fits Tru-Design Ball Valves and BSP threads - Universal compatibility to other Tru-Design fittings, and other marine components.
• Manufactured from a glass reinforced nylon composite.• Immune to corrosion and electrolysis for long service life.• Chemical resistant - Impervious to diesel, petrol and antifouling paints.• UV resistant, suitable for all marine environments.• Large operating temperature range from -20°C to +110°C.
Part No. Dimensions Tail Ø
450116 1" BSP Male 25mm
450118 1-1/2" BSP male 38mm
• Manufactured from a glass reinforced nylon composite.• Immune to corrosion and electrolysis for long service life.• Chemical resistant - Impervious to diesel, petrol and antifouling paints.• UV resistant, suitable for all marine environments.• Large operating temperature range from -20°C to +110°C.
TruDesgin® Nylon 120o Male BSP hose Joiners
TruDesgin® Nylon Hose Joiners
Part No. Dimensions Tail Ø
450108 1" BSP Male 28mm
450110 1-1/2" BSP Male 32mm
450112 1-1/4" BSP Male 38mm
• Manufactured from a glass reinforced nylon composite.• Immune to corrosion and electrolysis for long service life.• Chemical resistant - Impervious to diesel, petrol and antifouling paints.• UV resistant, suitable for all marine environments.• Large operating temperature range from -20°C to +110°C.
www.samallen.com.au357
Pumps &
Plumbing
Polyethylene Male Hose Joiners
Part No. Dimensions Tail Ø
45361 1/2" BSP Male 15mm
45362 3/4" BSP Male 20mm
45363 1" BSP Male 25mm
45364 1-1/4" BSP Male 32mm
45365 1-1/2" BSP Male 40mm
45389 2" BSP Male 50mm
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene 90o Male Hose Joiners
Part No. Dimensions Tail Ø
45366 1/2" BSP Male 15mm
45367 3/4" BSP Male 20mm
45368 1" BSP Male 25mm
45369 1-1/4 BSP Male 32mm
45370 1-1/2" BSP Male 40mm
45390 2" BSP Male 50mm
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene Straight Joiners
Part No. Dimensions
45371 15mm Straight Joiner
45372 20mm Straight Joiner
45373 25mm Straight Joiner
45374 32mm Straight Joiner
45375 40mm Straight Joiner
45400 50mm Straight Joiner
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene 90o Joiners
Part No. Dimensions
45376 15mm Elbow Joiner
45377 20mm Elbow Joiner
45378 25mm Elbow Joiner
45379 32mm Elbow Joiner
45380 40mm Elbow Joiner
45401 50mm Elbow Joiner
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Connectors
www.samallen.com.au358
Pum
ps &
Plu
mbi
ng
Part No. Dimensions
45381 15mm T Joiner
45382 20mm T Joiner
45383 25mm T Joiner
45384 32mm T Joiner
45385 40mm T Joiner
45403 50mm T Joiner
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene T Joiner
Part No. Dimensions Tails Ø
45386 1/2" BSP Male 15mm
45387 3/4" BSP Male 20mm
45388 1" BSP Male 25mm
45404 1-1/4" BSP Male 32mm
45405 1-1/2" BSP Male 40mm
45409 2" BSP Male 50mm
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene Male T Joiners
Connectors
Polyethylene BSP Male 90o Elbow Hose Joiners
Part No. Dimensions Tail Ø
45800 1/2" BSP Male 20mm
45801 1/2" BSP Male 25mm
45802 3/4" BSP Male 15mm
45803 3/4" BSP Male 25mm
45804 3/4" BSP Male 32mm
45805 1" BSP Male 15mm
45806 1 BSP Male 20mm
45807 1" BSP Male 32mm
45808 1" BSP Male 40mm
45810 1-1/4" BSP Male 15mm
45811 1-1/4" BSP Male 20mm
45812 1-1/4" BSP Male 25mm
45813 1-1/4" BSP Male 40mm
45815 1-1/2" BSP Male 20mm
45816 1-1/2" BSP Male 25mm
45817 1-1/2" BSP Male 32mm
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
www.samallen.com.au359
Pumps &
Plumbing
Polyethylene Hose Joiner
Part No. Dimensions Tail Ø
45599 1/2" BSP Male 16mm
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Double End Hose Joiner
Part No. Dimensions
45488 20mm Double End Hose Joiner
Connectors
CAN SB® Nylon Pumping Fittings
Part No. Dimensions Tail Ø
45270 3/8” BSP Male 10/12mm
45271 3/8” BSP Male 17/19mm
• Suitable for water tanks.• 45270 stepped ports suits 10/12mm hose sizes.• 45271 stepped ports suits 17/19mm hose sizes.• Italian made quality.
4527145270
Polyethylene Reducing Male Hose Joiners
Part No. Dimensions Tail Ø
45600 1/2" BSP Male 20mm
45601 1/2" BSP Male 25mm
45602 1/2" BSP Male 32mm
45603 3/4" BSP Male 15mm
45604 3/4" BSP Male 25mm
45605 3/4" BSP Male 32mm
45607 1" BSP Male 15mm
45608 1" BSP Male 20mm
45609 1" BSP Male 32mm
45610 1" BSP Male 40mm
45613 1-1/4" BSP Male 20mm
45614 1-1/4" BSP Male 25mm
45615 1-1/4" BSP Male 40mm
45616 1-1/4" BSP Male 50mm
45618 1-1/2" BSP Male 20mm
45619 1-1/2" BSP Male 25mm
45620 1-1/2" BSP Male 32mm
45621 1-1/2" BSP Male 50mm
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
www.samallen.com.au360
Pum
ps &
Plu
mbi
ng
Part No. Dimensions Tail Ø
45701 1/2" Female BSP 20mm
45702 1/2" Female BSP 25mm
45703 3/4" Female BSP 15mm
45705 3/4" Female BSP 25mm
45706 3/4" Female BSP 32mm
45707 3/4" Female BSP 40mm
45708 1" Female BSP 15mm
45709 1" Female BSP 20mm
45711 1" Female BSP 32mm
45712 1" Female BSP 40mm
45713 1-1/4" Female BSP 20mm
45714 1-1/4" Female BSP 25mm
45716 1-1/4" Female BSP 40mm
45718 1-1/2" Female BSP 20mm
45719 1-1/2" Female BSP 25mm
45720 1-1/2" Female BSP 32mm
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene Female BSP Reducers
Part No. Dimensions Tail Ø
45700 1/2" Female BSP 15mm
45704 3/4" Female BSP 20mm
45710 1" Female BSP 25mm
45715 1-1/4" Female BSP 32mm
45721 1-1/2" Female BSP 40mm
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene Female BSP Connectors
Connectors
Straight Reducer Hose to Hose Connectors
Part No. Dimensions
45873 3/4" x 1/2" ID ST
45874 1" x 1/2" ID ST
45875 1" x 3/4" ID ST
45876 1-1/4" x 1/2" ID ST
45877 1-1/4" x 3/4" ID ST
45878 1-1/4" x 1" ST ID
45879 1-1/2" x 1/2" ID ST
45880 1-1/2" x 3/4" ID ST
45881 1-1/2" x 1" ID ST
45882 1-1/2" x 1-1/4" ID ST
45883 1-1/2" x 2" ID S/H Tail
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
www.samallen.com.au361
Pumps &
Plumbing
Polyethylene BSP Female 90o Elbow Hose Joiners
Part No. Dimensions Tail Ø
45850 1/2" BSP Female 15mm
45851 1/2" BSP Female 20mm
45852 1/2" BSP Female 25mm
45853 3/4" BSP Female 15mm
45854 3/4" BSP Female 20mm
45855 3/4" BSP Female 25mm
45856 3/4" BSP Female 32mm
45857 1" BSP Female 15mm
45858 1" BSP Female 20mm
45859 1" BSP Female 25mm
45860 1"BSP Female 32mm
45861 1" BSP Female 40mm
45863 1-1/4" BSP Female 15mm
45864 1-1/4" BSP Female 20mm
45865 1-1/4" BSP Female 25mm
45866 1-1/4" BSP Female 32mm
45867 1-1/4" BSP Female 40mm
45869 1-1/2" BSP Female 20mm
45870 1-1/2" BSP Female 25mm
45871 1-1/2" BSP Female 32mm
45872 1-1/2" BSP Female 40mm
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
45850 - 45872
Connectors
45850 - 45872
Nylon 900 Elbow Tail/Tail Reducers
Part No. Type Dimensions
45750 3/4” x 1/2" ID Elbow
45751 1” x 1/2" ID Elbow
45752 1” x 3/4" ID Elbow
45753 1-1/4” x 1/2" ID Elbow
45754 1-1/4” x 3/4" ID Elbow
45755 1-1/4” x 1" ID Elbow
45756 1-1/2” x 1/2" ID Elbow
45757 1-1/2” x 3/4" ID Elbow
45758 1-1/2” x 11/4" ID Elbow
45759 1-1/2” x 2" ID Elbow
CAN SB® Nylon Pumping Fittings
Part No. Type Dimensions
45275 1-1/2” BSP 90° Swivel Connector
www.samallen.com.au362
Pum
ps &
Plu
mbi
ng
Connectors
Part No. Dimensions
453101 1/2" x 1/2" BSP Female
453102 3/4" x 1/2" BSP Female
453103 3/4" x 3/4" BSP Female
453104 1" x 3/4" BSP Female
453105 1" x 1" BSP Female
453106 1-1/4" x 1" BSP Female
453107 1-1/4" x 1 1/4" BSP Female
453108 1-1/2" x 1" BSP Female
453109 1-1/2" x 1 1/4" BSP Female
453110 1-1/2" x 1 1/2" BSP Female
453111 2" x 1 1/2" BSP Female
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene Female Couplings
Part No. Dimensions
453130 1/2" BSP Male x 1/2" BSP Female
453131 1/2" BSP Male x 3/4" BSP Female
453133 3/4" BSP Male x 1" BSP Female
453134 1" BSP Male x 3/4" BSP Female
453135 3/4" BSP Male x 1 1/2" BSP Female
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene Male To Female Couplings
Part No. Dimensions
453121 1/2" x 1/2" BSP Male
453122 3/4" x 1/2" BSP Male
453123 3/4" x 3/4" BSP Male
453119 3/4" x 1-1/4" BSP Male
453120 1" x 1/2" BSP Male
453124 1" x 3/4" BSP Male
453125 1" x 1" BSP Male
453126 1-1/4" x 1-1/4" BSP Male
453127 1-1/2" x 1" BSP Male
453128 1-1/2" x 1-1/2" BSP Male
453150 2" x 2" BSP Male
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene Male Nipples
www.samallen.com.au363
Pumps &
Plumbing
Part No. Dimensions
453171 1/2" BSP Female Elbow
453172 3/4" BSP Female Elbow
453173 1" BSP Female Elbow
453174 1-1/4" BSP Female Elbow
453175 1-1/2" BSP Female Elbow
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene 90o Female Eblows
Part No. Dimensions
453178 1/2" BSP Male - Female
453179 3/4" BSP Male - Female
453180 1" BSP Male - Female
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene 90o Male To Female
Part No. Dimensions
453181 1/2" BSP Female T Joiner
453182 3/4" BSP Female T Joiner
453183 1" BSP Female T Joiner
453184 1-1/4" BSP Female T Joiner
453185 1-1/2" BSP Female T Joiner
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene BSP Female T Joiners
Nylon Thru Hull Manifold
Part No. Description
45320 Nylon Thru-hull Manifold
• Unique design drains faster, while eliminating as many as two unsightly thru-hulls.
• Innovative design generates vortex action for faster drainage.• Available in 1 1/2" Hose barb at top end with 1 1/4" or 1 1/2" threads
at bottom.• Available with 1 1/2" Hose barbs at both ends.• Side barbs available from 5/8" to 1 1/8" in all combinations.• Moulded in high-impact super-tough Nylon(S.T. 801)
Part No. Description
45355 25mm Y Piece
45356 38mm Y Piece
45357 25mm-25mm-38mm Y Piece
• Long tail feature - The use of 2 hose clamps is recommended for secure hose fitting
• Smooth flow - Less blockages and buildup.• Manufactured from a glass reinforced nylon composite.• Immune to corrosion and electrolysis for long service life.• Chemical resistant - Impervious to diesel, petrol and antifouling paints.• UV resistant, suitable for all marine environments.• Large operating temperature range from -20°C to +110°C
TruDesign® Y Pieces
Connectors
www.samallen.com.au364
Pum
ps &
Plu
mbi
ng
Polyethylene BSP Male Plugs/End Caps
Part No. Dimensions
453141 1/2" BSP Male
453142 3/4" BSP Male
453143 1" BSP Male
453144 1-1/4" BSP Male
453145 1-1/2" BSP Male
453146 2" BSP Male
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene Female BSP Caps
Part No. Dimensions
453151 1/2" BSP Female
453152 3/4" BSP Female
453153 1" BSP Female
453154 1-1/4 BSP Female
453155 1-1/2" BSP Female
453156 2" BSP Female
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene Male To Female Bushes/End Caps
Part No. Dimensions
453157 1-1/4" BSP Male x 1/2" BSP Female
453158 1-1/4" BSP Male x 3/4" BSP Female
453159 1-1/2" BSP Male x 1" BSP Female
453160 1" BSP Male x 1/2" BSP Female
453161 3/4" BSP Male x 1/2" BSP Female
453162 1" BSP Male x 3/4" BSP Female
453163 1-1/4" BSP Male x 1" BSP Female
453164 1-1/2" BSP Male x 1-1/4" BSP Female
453168 2" BSP Male x 1-1/2" BSP Female
453169 1-1/2" BSP Male x 1/2 BSP Female
453170 1-1/2" BSP Male x 3/4" BSP Female
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Part No. Dimensions
45500 3/4" Tube Holder
45501 1" Tube Holder
45502 1-1/4" Tube Holder
45503 1-1/2" Tube Holder
45504 1-3/4" Tube Holder
45505 2-1/4" Tube Holder
45506 3-1/4" Tube Holder
• UV and chemical resistance. • Long tail and thick polyethylene walls.• Operating temperature - 00C to 1200C.
Polyethylene Tube Holders
End Caps & Fittings
www.samallen.com.au365
Pumps &
Plumbing
Part No. Description Quantity
764000 6-16mm Stainless Steel Clamps 10 Per Box
764002 11-18mm Stainless Steel Clamps 10 Per Box
764004 11-22mm Stainless Steel Clamps 10 Per Box
764006 13-25mm Stainless Steel Clamps 10 Per Box
• For marine, industrial, automotive, agricultural, chemical and general purpose use.
• Band: 301 Stainless steel.• Housing: 301 Stainless Steel.• Screw: 305 Stainless Steel (Hex Head).
Stainless Steel Perforated Regular Hose Clamps
Part No. Description Quantity
764010 13-25mm Stainless Steel Clamps 10 Per Box
764012 14-27mm Stainless Steel Clamps 10 Per Box
764014 18-32mm Stainless Steel Clamps 10 Per Box
764015 21-38mm Stainless Steel Clamps 10 Per Box
764016 21-44mm Stainless Steel Clamps 10 Per Box
764018 27-51mm Stainless Steel Clamps 10 Per Box
764020 33-57mm Stainless Steel Clamps 10 Per Box
764022 40-64mm Stainless Steel Clamps 10 Per Box
764024 46-70mm Stainless Steel Clamps 10 Per Box
764026 52-76mm Stainless Steel Clamps 10 Per Box
764028 59-83mm Stainless Steel Clamps 10 Per Box
764030 65-89mm Stainless Steel Clamps 10 Per Box
764032 78-102mm Stainless Steel Clamps 10 Per Box
764034 103-127mm Stainless Steel Clamps 10 Per Box
764036 117-140mm Stainless Steel Clamps 10 Per Box
764038 106-152mm Stainless Steel Clamps 10 Per Box
764040 115-165mm Stainless Steel Clamps 10 Per Box
764042 133-178mm Stainless Steel Clamps 10 Per Box
• For marine, industrial, automotive, agricultural, chemical and general purpose use.
• Band: 301 Stainless steel.• Housing: 301 Stainless steel.• Screw: 305 Stainless steel (Hex head).
Stainless Steel Non-Perforated Hose Clamps
Part No. Description Quantity
764050 9.5-12mm Stainless Steel Clamp 10 Per Box
764052 11-16mm Stainless Steel Camp 10 Per Box
764054 13-20mm Stainless Steel Clamp 10 Per Box
• For marine, industrial, hardware auto and general purpose use.• Rolled edge and smooth underside to prevent hose damage.• Band: 304 Stainless steel.• Housing 304 Stainless steel.• Screw: 302 Stainless steel.
NOTE: Remove safety collar .
Stainless Steel Perforated Micro Hose Clamps
Hose Clamps
8.2mm
16.8mm10.2mm
Size Range
8mm
6mm
16.0mm
12.7mm
30.1mm
11.3mm8.0mm
Size Range
www.samallen.com.au366
Pum
ps &
Plu
mbi
ng
Stainless Steel Non-Perforated Clamps
Part No. Description Quantity
764058 16-24mm Stainless Steel Clamp 10 Per Box
764060 16-27mm Stainless Steel Clamp 10 Per Box
764062 22-32mm Stainless Steel Clamp 10 Per Box
764064 22-38mm Stainless Steel Clamp 10 Per Box
764066 35-48mm Stainless Steel Clamp 10 Per Box
764068 35-53mm Stainless Steel Clamp 10 Per Box
764070 40-57mm Stainless Steel Clamp 10 Per Box
764072 52-70mm Stainless Steel Clamp 10 Per Box
764074 65-90mm Stainless Steel Clamp 10 Per Box
764076 85-110mm Stainless Steel Clamp 10 Per Box
764078 105-130mm Stainless Steel Clamp 10 Per Box
764080 130-155mm Stainless Steel Clamp 10 Per Box
764082 155-180mm Stainless Steel Clamp 10 Per Box
764084 180-205mm Stainless Steel Clamp 10 Per Box
• For marine, industrial, hardware auto and general purpose use.• Rolled edge and smooth underside to prevent hose damage.• Band: 304 Stainless steel.• Housing 304 Stainless steel.• Screw: 302 Stainless steel.
NOTE: Remove safety collar .
Hose Clamps
Size Range
11.3mm
27.7mm15.5mm
12.7mm
7mm
Part No. Description Quantity Ref
764090 40-43mm Stainless Steel Clamp Sold Each 1
764092 48-51mm Stainless Steel Clamp Sold Each 1
764094 52-55mm Stainless Steel Clamp Sold Each 1
764096 56-59mm Stainless Steel Clamp Sold Each 1
764098 60-63mm Stainless Steel Clamp Sold Each 1
764100 64-67mm Stainless Steel Clamp Sold Each 2
764102 68-73mm Stainless Steel Clamp Sold Each 2
764104 74-79mm Stainless Steel Clamp Sold Each 2
764106 80-85mm Stainless Steel Clamp Sold Each 2
764108 86-91mm Stainless Steel Clamp Sold Each 2
764110 92-97mm Stainless Steel Clamp Sold Each 2
764112 98-103mm Stainless Steel Clamp Sold Each 2
764114 104-112mm Stainless Steel Clamp Sold Each 2
764116 113-121mm Stainless Steel Clamp Sold Each 2
764118 122-130mm Stainless Steel Clamp Sold Each 2
764120 131-139mm Stainless Steel Clamp Sold Each 3
• For heavy duty applications where large tightening forces are required.• Rolled edge to prevent hose damage.• Solid trunnions with hex head bolt.• Band: 304 Stainless.• Bridge: 304 Stainless Steel.• Bolt: High tensile 316 Stainless steel.• Trunnion: 300 Series stainless.• Collar: 300 Series stainless.
Stainless Steel T-Bolt Clamps
Specifications
Ref. Band Width Bridge Width Band Thickness Bolt Bolt Length
1 20mm 22mm 0.7mm M6 55mm
2 24mm 27mm 1.0mm M8 80mm
3 26mm 29mm 1.2mm M10 105mm
Bolt Bridge
Band
Band
Size Range
www.samallen.com.au367
Pumps &
Plumbing
Water Heaters & Accessories
Part No. Capacity(Litres) Element Volts Kpa Dimensions (mm)
L x W x H
44240 12L 500W 220-240V 500 255 x 334 x 334
44250 22L 500W 220-240V 500 410 x 334 x 334
44260 30L 500W 220-240V 500 545 x 334 x 334
44270 45L 500W 220-240V 500 805 x 334 x 334
44276 45L 1200W 220-240V 500 805 x 334 x 334
44280 60L 500W 220-240V 500 990 x 334 x 334
44286 60L 1200W 220-240V 500 990 x 334 x334
• Dual heating - Single heat exchanger and Incoloy electric element.• 316G Stainless steel inner layer, 304G Stainless steel outer layer and 316G
stainless steel heat exchanger. Supplied with stainless steel mounting brackets.• Insulation - polyurethane with closed cells reduces heat loss to 1oC per hour
with 24 hours.• Welding process complying to EN287 and EN288.• Safety valve protects the tank from possible excessive pressure.• Horizontal mounting.• CE Certified EN 60335.• 1 Year Warranty.
ATI® Horizontal Cylinder Water Heaters
ATI® Up Right Cylinder Water Heaters
Part No. Capacity(Litres) Element Volts Kpa Dimensions (mm)
L x W x H
44265 40L 1200W 220-240V 500 465 x 465 x 465
44290 65L 1200W 220-240V 500 456L x 465W x 660H
• Enamelled steel inner layer, 304G Stainless steel outer layer .• Incoloy electric element, Copper heat exchanger.• Magnesium Anode to protect the tank against galvanic corrosion.• Thick insulation.• Supplied with stainless steel mounting brackets.• Welding process complying to EN287 and EN288.• Safety valve protects the tank from possible excessive pressure.• CE Certified EN 60335.• 1 Year Warranty.
Part No. Capacity(Litres) Element Volts Kpa Dimensions (mm)
L x W x H
44245 20L 800W 220-240V 500 420 x 190 x 510
• Prepainted aluminium outer layer, 316G Stainless steel inner layer and 316G stainless steel heat exchanger.
• Incoloy electric element.• Magnesium Anode to protect the tank against galvanic corrosion.• Thick insulation.• Supplied with stainless steel mounting brackets.• Welding process complying to EN287 and EN288.• Safety valve protects the tank from possible excessive pressure.• CE Certified EN 60335.• 1 Year Warranty.
ATI® Up Right Rectangle Water Heater
The quality of ATI® products is the result of deep passion, care and attention paid to every stage of production:
• Choosing of certified quality materials. • Welding process complying with EN 297 • Pressure testing (tanks are 100% pressure tested) • Pickling and passivation treatment against corrosion (stainless
steel range)
• Enamelling (twice layer) with certified material DIN 4753 (enamelled range)
• Thermal insulation made of closed cell expanded polyurethane foam (CFC and HCFC free).
• Final electrical test according to EN 60335.
ATI® Water Heating Systems
Water Heaters
www.samallen.com.au368
Pum
ps &
Plu
mbi
ng
Heat Insulation: Expanded Polyurethane with closed cells(HFC, CFC, HCFC and HFA free).
Electrical heating element allowing hot water production when engine heat is not available.
Pressure Relief and Non-return Valves: Set at 6±0.5 bar.
Adjustable safety thermostat for temperature adjustment on electrical heating.
Internal surface: 316 Grade stainless steel.
Heating exchanger/ coil: 316 Stainless steelExchange surface area: 22 Litre and 30 Litre - 1.530 cm245 Litre and 60 Litre - 2.700 cm2 .
External casing: 316 Grade stainless steel.
Mounting brackets: 304 Grade stainless steel.
ATI® Double Heat Exchange Water Heaters
ATI® Incoloy Electric Heating Element
Part No. Capacity(Litres) Element Volts Kpa Dimensions (mm)
L x W x H
44278 45L 1200W 220-240V 500 805 x 334 x 334
44279 60L 1200W 220-240V 500 990 x 334 x 334
• Dual heating - Double heat exchanger and single Incoloy electric element.• 316G Stainless steel inner layer, 304G Stainless steel outer layer, 316G stainless
steel heat exchanger.• Expanded polyurethane with closed cells reduces heat loss to 1oC per hour with
24 hours.• Supplied with stainless steel mounting brackets.• Welding process complying to EN287 and EN288.• Safety valve protects the tank from possible excessive pressure.• Horizontal mounting.• CE Certified EN 60335.• 1 Year Warranty.
Part No. Element Volts
44295 500W 230V Electrical Heater Element with Anode Holder
44296 800W 230V Electrical Heater Element with Anode Holder
44297 1200W 230V Electrical Heater Element with Anode Holder
44298 Thermostat Suits 16A
44299 Thermostat Suits 20A
Electrical heater element: • Heats water even when the boat engine is off.
Thermostat: • Cuts off the electrical supply to the heater element as the preset temperature is
achieved (temperature can be set between 0°C and 70°C).
44295 - 44297
44298 - 44299
Water Heaters & Accessories
www.samallen.com.au369
Pumps &
Plumbing
TruDesign Intake Strainers
Part No. Inside (mm) Outside (mm) Thickness (mm) Screw Gauge
29296 73 x 40 95 x 65 3 8g
29298 100 x 65 130 x 95 4 8g
29299 138 x 90 175 x 12 5 8g
• Nonmetallic and noncorrosive.• Chemical and UV resistant..
TruDesign Round Intake Strainer
Part No. Dimensions
29297 100mm Round Intake Strainer
• Nonmetallic and noncorrosive.• Ideal for small gen-sets and water makers.• Chemical and UV resistant.• Ideally suited to fit 1 1.4" skin fittings or smaller.
100mm
20mm
4.5mm
Bronze Oval Scoops
Part No. Size Internal MeasurementsL x W x D
29294 Small Round Ø 80mm x 18mm
29286 Small 90mm x 50mm x 15mm
29288 Medium 145mm x 85 mm x 25mm
29290 Large 95mm x 95mm 45mm
29292 X - Large 160mm x 95mm x 35mm
29293 XX - Large 200mm x 160 mm x 37mm
Scoops
29293
29294
29290
29288
29286
29292
Part No. Description
45071 3/4" BSP Thread Stainless Steel Skin Fitting Scoop
45072 1" BSP Thread Stainless Steel Skin Fitting Scoop
45074 1-1/2" BSP Thread Stainless Steel Skin Fitting Scoop
45075 2" BSP Thread Stainless Steel Skin Fitting Scoop
• 316G stainless steel thru-hull connection skin fitting scoop and BSP thread tail.
• Skin fitting includes nut.
Stainless Steel Skin Fitting Scoop - Threaded
Scoops & Strainers
www.samallen.com.au370
Pum
ps &
Plu
mbi
ng
Nylon Drain with Stainless Steel Covers
Part No. Face Cover Pipe ID End Pipe ID Mouth Length
45490 70mm 72mm 21mm 31mm 90mm
45492 82mm 84.5mm 29.5mm 44mm 104mm
• 27 cut holes into the top stainless steel cover for maximum drainage.• Rod down the centre of the body to prevent large obstructions being lodged in
the body of the pipe.
L-Flange Skin Fittings
Part No. Dimensions
45472 1-1/8" Skin Fitting
• Can be used as a deck drain/scupper.• L-Flange allows close to the floor mounting.
Part No. Dimensions
45068 20mm Stainless Steel Mesh Strainer
• Suitable for raw water intake for gen-set or live bait tank.
316G Stainless Steel Thru-hull Mesh Strainer
Strainers
www.samallen.com.au371
Pumps &
Plumbing
Part No. Description
45009 1" BSP 16mm Tail Stainless Steel Sea Strainer
• Screw off lid with 2 stainless pillars for tightening.• BSP threaded inlet.• Hose tail outlet.• See through lid.• Dimensions: 300mm x 120mm x Ø75 (LxWxD).
Stainless Steel Sea Strainer
Part No. Description
45010 1" BSP Male Stainless Steel Sea Strainer
45012 1 1/4" BSP Male Stainless Steel Sea Strainer
45014 1 1/2" Stainless Steel Sea Strainer
45016 2" Stainless Steel Sea Strainer
45018 2 1/2" Stainless Steel Sea Strainer
• 316G stainless steel strainer with a removable lid.• Hose tail inlet.• Male BSP thread outlet.
316G Stainless Steel Sea Strainers
Part No. Description
45894 20mm Plastic Sea Water Strainer
45895 25mm Plastic Sea Water Strainer
45897 38mm Plastic Sea Water Strainer
• Plastic Sea Water Strainer with transparent lid for easy inspection.
Plastic Sea Water Strainers
Part No. Description
45196 1/2" In Line Filter
45197 3/4" In Line Filter
45198 1" In Line Filter
45199 Spare Filter
• Transparent cartridge for easy inspection• 45199 - Replaceable mesh filter.
Plastic In Line Filters
45196 - 45198
45199
www.samallen.com.au
Strainers
www.samallen.com.au
Sam Allen Wholesale
385 Thynne Road, Morningside, Queensland, 4170 Ph: 07 3902 7222 Fax: 07 3899 1079 www.samallen.com.au
Pum
ps &
Plu
mbi
ng
www.samallen.com.au