Many Motorcycle Mod Junkie That Fits Aftermarket Compatible Ignition Controller Like the BRT
2
Many motorcycle mod junkie that fits aftermarket compatible ignition controller like the BRT, kitti and others do not have that pulse to make the tachometer work again, Hence only some modification is needed. igure ! shows the circuit that may ab le to use to control and or make the tachometer works and uses "M#$!%& which is a fre'uency to voltage converter entirely useful on thise analog tachometer made by T()* R. +R+-T */+R)T0& The signal pin is connected to the primary input of the ignition coil. The meter connection to be use is meter 123 and will be connected to the wire that was supposedly connected on the + pin. which is pin 4 wire..calibration is done b y 5R!, and your done. +0&/TR-+T0&
-
Upload
arif-nurahman -
Category
Documents
-
view
2 -
download
0
description
ml
Transcript of Many Motorcycle Mod Junkie That Fits Aftermarket Compatible Ignition Controller Like the BRT
Many motorcycle mod junkie that fits aftermarket compatible ignition controller like the BRT, kitti and others do not have that pulse to make the tachometer work again, Hence only some modification is needed.
Figure 1 shows the circuit that may able to use to control and or make the tachometer works and uses LM2917N which is a frequency to voltage converter entirely useful on thise analog tachometer made by TYPE R.
CIRCUIT DESCRIPTION
The signal pin is connected to the primary input of the ignition coil. The meter connection to be use is meter (-) and will be connected to the wire that was supposedly connected on the CDI pin. which is pin 5 wire..calibration is done by VR1, and your done.
CONSTRUCTION
![[A4] XIAOMEI_Guangzhou BRT and New BRT in China - Ed](https://static.fdocuments.us/doc/165x107/577ce47b1a28abf1038e73a0/a4-xiaomeiguangzhou-brt-and-new-brt-in-china-ed.jpg)
