MANUFACTURING COMPAN T 175A · T 175A ey-Account Information T 175A Copyright RUTHMANN, 2013 HEIGHT...
Transcript of MANUFACTURING COMPAN T 175A · T 175A ey-Account Information T 175A Copyright RUTHMANN, 2013 HEIGHT...
T 175A
Key-Account Information T 175A Copyright © RUTHMANN, 2013
HEIGHTperformance
T 175AMANUFACTURING COMPANY
“ADVANTAGES ABOVE THE COMPETITION!”
Key-Account Information T 175A Copyright © RUTHMANN, 2013
HEIGHTperformance
T 175AMANUFACTURING COMPANY “ADVANTAGES ABOVE THE COMPETITION!”
Approx. 52’-6” reach with upper boom
The telescopic upper boom and operator controlled articulating fly jib (RÜSSEL®) provides greater maneuverability (access) and side reach.
GREATER REACH WITH THE UPPER BOOM
9’-9”
OF TELESCOPIC REACH13’-1”
Key-Account Information T 175A Copyright © RUTHMANN, 2013
HEIGHTperformance
T 175AMANUFACTURING COMPANY
180°
“ADVANTAGES ABOVE THE COMPETITION!”
1323 lbs cage load
6’-3” fly jib length (RÜSSEL®)25% MORE
19’-8” of vertical movement over the articulation range of the fly jib (RÜSSEL®)
Unmatched flexibility by utilizing the operator controlled fly jib (RÜSSEL®)
Operator controlled fly jib (RÜSSEL®) articulation range relative to upper boom 180°
operational in winds up to 28 mph
Key-Account Information T 175A Copyright © RUTHMANN, 2013
HEIGHTperformance
T 175AMANUFACTURING COMPANY
12’-6”
8’4’-7”
3’-2
”
“ADVANTAGES ABOVE THE COMPETITION!”
Roomy, extendable platform providing all important features
automatic ground to platform contact protection
two platform entry locations
hydraulic extension / retraction
cleaning port
moveable control panel
7 anchor points for safety belts
110 V @ 20 amps conductor from ground to duplex outlet in cage
Tool power 6 gpm @ 2,000 psi, dual outlets
Key-Account Information T 175A Copyright © RUTHMANN, 2013
HEIGHTperformance
T 175AMANUFACTURING COMPANY
183 ft177171164157151144138131125118112105989285797266595246393326201370-7-13-20-26-33
0 7 13 20 26 33 39 46 52 59 66 72 85 92 98 105 112 118 125 131 ft
220 lbs
705 lbs
1323 lbs
material handler
57,320 lbs*
“ADVANTAGES ABOVE THE COMPETITION!”
Available on 3 or 4 axle chassis
approx. 177 ft working height
approx. 118 ft side reach
PERFORMANCE DATA
*Depending on chassis configuration and equipment options
T 175A on 4 axle chassis
Key-Account Information T 175A Copyright © RUTHMANN, 2013
HEIGHTperformance
T 175AMANUFACTURING COMPANY “ADVANTAGES ABOVE THE COMPETITION!”
Multiple locations for outriggers control
LOCATION OF OUTRIGGER CONTROLS
rear end of vehicle, left side
rear end of vehicle, right side
platform (automatic retraction to stowed position)
automatic chassis leveling
multiple outrigger configurations with short jacking
Maximum stabilizer width 28’-6” refer to the center of the cylinder 29’-5” outer edge of supporting plate
Prop spacing in longitudinal direction: 23’-4”
Key-Account Information T 175A Copyright © RUTHMANN, 2013
HEIGHTperformance
T 175AMANUFACTURING COMPANY
ca.39’-2”
“ADVANTAGES ABOVE THE COMPETITION!”
Technical data and dimensions of the T 175A
jack cylinder stroke is 2’-11”4” MORE
10”* ground clearance to outrigger leveling plate6” MORE
aerial is operational when up to 2° out of level1° MORE
from 12’-1” to 13’-2”*
*Depending on chassis configuration and equipment options
Key-Account Information T 175A Copyright © RUTHMANN, 2013
HEIGHTperformance
T 175AMANUFACTURING COMPANY “ADVANTAGES ABOVE THE COMPETITION!”
The evolutionary continuation of the innovative boom profile technology based on proven accomplishments of the HEIGHT performance-series
multiple bend profile boom technology
Key-Account Information T 175A Copyright © RUTHMANN, 2013
HEIGHTperformance
T 175AMANUFACTURING COMPANY “ADVANTAGES ABOVE THE COMPETITION!”
Mountable on most U.S. manufactured chassis
POSSIBILITIES OF CHASSIS SELECTION
All class 8 chassis manufacturers and their respective drive configurations will be evaluated to provide an best travel configuration and off road perfor-mance.
Key-Account Information T 175A Copyright © RUTHMANN, 2013
HEIGHTperformance
T 175AMANUFACTURING COMPANY
Material handling max lifting capacity 661 lbs
with 200’ of 5/16” diameter Sampson Spectron II rope with a working capacity of 1,500 lbs
and rope assembly includes eyes on both ends with swivel clevis hook and rope shield
“ADVANTAGES ABOVE THE COMPETITION!”
Extremely practical - THE „MATERIAL WINCH*“
CAGE WORKING LOADS
Maximum combined cage load 1,323 lbs
* optional
Key-Account Information T 175A Copyright © RUTHMANN, 2013
HEIGHTperformance
T 175AMANUFACTURING COMPANY “ADVANTAGES ABOVE THE COMPETITION!”
Excellent performance also BELOW GROUND-LEVEL
approx. 24’-7” outreach below ground-level4’-9” MORE
approx. 41’ total reach upper boom and operator controlled fly jib (RÜSSEL®)
T 175A
Key-Account Information T 175A Copyright © RUTHMANN, 2013
HEIGHTperformance
T 175A
Summary of advantages � Over 52’ of side reach � Operator controlled fly jib (Rüssel®) provides exceptional
maneuverability � 177’ of working height and 118’ of side reach on class 8
commercial chassis � Control of outriggers at rear of vehicle and from the
platform for stowing � Multiple bend profile boom technology state-of-the-art � Aerial assembly is mountable on most U.S. class 8
commercial chassis
7601 Imperial DriveP.O. Box 20368Waco, Texas 76702-0368
UNITED STATES
Phone: +1 254 399 2100 Toll Free: +1 800 825 1085 Internet: www.timemfg.com
MANUFACTURING COMPANY
“ADVANTAGES ABOVE THE COMPETITION!”