STEEL FABRICATION & MACHINING FACILITIESFeaturing: LINK-BELT RTC-8030 Series II Rough Terrain Crane w/only 3,220 hours, CNC Flame Cutter, Horizontal Bandsaws, Hydraulic Ironworkers,

Sandblast Equipment, Horizontal Boring Mill, Engine Lathes, Welding Machines, Rough Terrain Forklifts, Radial Arm Drills, Plus Machine Tools Located in

Kenner, LA to Be Sold by Photo in Bay St. Louis, Horizontal Boring Mill, Engine Lathe, Vertical Turret Mill, Keyseater, Radial Arm Drill, More!

Sale to Be Conducted at

MANUFAB, INC.3300 Port & Harbor Dr.,

Port Bienville Industrial Park

BAY ST. LOUIS, MS 39520

(See Directions on Back Page)

Plus Items Located at Address Below to

Be Sold by Photo at Bay St. Louis

MANUFAB, INC.129 E 3rd Street, KENNER, LA

70062

AUCTION: TUESDAY, AUGUST 2 • 10:00 A.M.

INSPECTION AT BOTH LOCATIONS: Monday, August 1 9:00 A.M. to 4:00 P.M. & Morning of Sale

BUYER’S PREMIUM: 15% ON-SITE • 18% WEBCAST

<LINK-BELT RTC-8030 SERIES II ROUGH TERRAIN CRANE

<ACRA TURN 30" X 120" ENGINE LATHE

MILLER DELTAWELD 452 MIG WELDERS

>GEKA

HYDRAULIC IRONWORKER

HYDMECH 16" X 23" MITERING HORIZ. BANDSAW

AUCTION

Headquarters:1304 Langham Creek Drive, Suite 454

Houston, Texas 77084

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: pmi@pmi-auction.comWEBSITE: www.pmi-auction.com

RONALD G. MOORE, MS LIC. #425; PMI, MS LIC. #417F • LA LIC. #851; PMI, LA LIC. #AB-396

HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

Read Partial Terms and Conditions on Back Page of Brochure

On-Site Bidding in Bay St. Louis, Mississippi or

Bid Via Webcast at

LOWHOURS

GEKA 110 T. HYDRAULIC IRONWORKER

CUSTOM H-FRAME SHOP PRESS

FRANKLIN 100 T. PORTABLE FABRICATING PUNCH SET

HYDMECH 16" X 23" MITERING HORIZ. BANDSAW

(1 OF 2) LINCOLN SUB-ARC WELDING TRACTORSMILLER DELTAWELD 452 MIG WELDERS

DACC INDUSTRIES 10' x 30' CNC OXY/FUEL CUTTING MACHINE

MITERING HORIZONTAL BANDSAWSHYDMECH MDL. S-23 SEMI-AUTOMATIC, 16" x 23" cap. @ 90 deg., 1-1/4" blade, 70–350 SFM blade spd., 5-1/4 HP motor, H.D. infeed/outfeed roller conveyor, S/N X0400138H.

HYDMECH MDL. S-20 SERIES 3, 13" x 18" cap. @ 90 deg., 1" blade, 45–330 SFM blade spd., 3 HP, pwr. vise, H.D. infeed roller conveyor, S/N 6A1107593.

CNC FLAME CUTTING MACHINEDACC INDUSTRIES MDL. 2700, Pico Path CNC control, Accu-Drive bridge system, (4) oxy. fuel torches w/motorized torch holders, 10' max. cutting width, approx. 30' max. cutting length, floor mtd. rail and rack drive, dry burning tbl., S/N N.A.

HYDRAULIC IRONWORKERGEKA 110 T. MDL. HYD110, 6-1/2" x 6-1/2" x 1/2" angle cutting cap., 24" x 5/8" flat shear, 2" rd. bar cap., 1-1/2" thru 3/4" punch cap., (2) foot pedal stations, assorted conveyor, elec. trip stop, S/N 15858.

FABRICATING PUNCH SETFRANKLIN 100 T. CAP., 12" throat depth web punch, 6" throat depth flange punch, independent hyd. pwr. supply, large assortment of punches and dies.

H-FRAME PRESSCUSTOM APPROX. 50 T. CAP., Enerpac hyd. cylinder, H.D. fabricated steel design, tube notching die.

WELDING MACHINES(6) MILLER DIMENSION MDL. 452 MIG WELDERS, 450 amps @ 38 v., 100% duty cycle, Mdl. 22A wire feeder, running gear, incl. S/N KJ071012, S/N KJ204649.

(2) MILLER DELTAWELD MDL. 451 WELDERS, 450 amps @ 38 v., 100% duty cycle, Mdl. 22A wire feeder, S/N KE741049, S/N KE667348.

MILLER MDL. SRH444 DC WELDER, 400 amps @ 36 v., 60% duty cycle, S/N KJ062657.

MILLER DELTAWELD MDL. 302 MIG WELDER, 300 amps @ 32 v., 100% duty cycle, Mdl. 22A wire feeder, S/N KF790543.

(4) MILLER MDL. CP302 MIG WELDERS, 300 amps @ 32 v., 100% duty cycle, Mdl. 22A wire feeder, S/N KG295836, S/N KG287773, and S/N KG211464 w/running gear, S/N KA241017.

AIRCO DIP ARC DC WELDER, 650 amps @ 44 v., 100% duty cycle, S/N N.A.

SUB-ARC WELDING TRACTORS(2) LINCOLN MDL. LNE MULTI-PROCESS WIRE FEEDER, w/running gear, wire reel and flux tank, (1) w/pwr. travel torch head.

TABLES66" X 144" H.D. T-SLOTTED CAST IRON TBL. w/fabricated steel stand and 1/4" steel sub-plate; FORGES DE GILLES INFEEDING POWER ROTARY TBL., 96" sq., infeed gear box, pwr. rotation, T-slotted tbl. top; FABRICATED STEEL SLATTED CUTTING TBL.; H.D. FABRICATED WELDING TBLS.

CNC

LARGE

CAPACITY

8' X 19" CINCINNATI BICKFORD RADIAL ARM DRILL

SCHARMANN 5-1/8" FLOOR-TYPE HORIZ. BORING MILL

FORGES DE GILLES 8' X 8' INFEEDING ROTARY TBL.

SHARP 17" X 60" ENGINE LATHE

SULLAIR 60 HP ROTARY SCREW AIR COMPRESSORSHOTBLAST EQUIPMENT

FLOOR-TYPE HORIZONTAL BORING MILLSCHARMANN, 5-1/8" dia. spndl., spndl. spds.: 3.4–1,040 RPM, 31-1/2" built-in facing head, pendant control, approx. 96" vert. travel, 20' horiz. column travel, #7 MT spndl., S/N 6847.

ENGINE LATHESHARP 17" X 60" MDL. 1760K, 2-1/2" spndl. hole, steadyrest, 3-jaw chuck, spds.: 50–1,800 RPM, inch/metric thdng., S/N 73275.

RADIAL ARM DRILLSCINCINNATI BICKFORD 8' X 19", spds.: 16–1,004 RPM, #5 MT spndl., pwr. elevation and clamping, 33-1/2" x 26-1/2" x 17" plain box tbl., pwr. head traverse, S/N 6E-384.

ARBOGA 3' X 9" MDL. RLM3512, 2.2 kW drive motor, #3 MT spndl., spds.: 70–1,965 RPM, plain box tbl., pwr. elevation, S/N 283200.

MISCELLANEOUS MACHINERYEVERETT 20" ABRASIVE CUT-OFF SAW, 10 HP drive.

JET MDL. GHD-20PF GEARED HEAD DRILL, 18" x 20" elevating tbl., #3 MT spndl., pwr. feed, 1 HP drive, S/N 8050918.

DELTA MDL. 23-880 BENCH GRINDER, 1/2 HP motor, fabricated steel stand.

JET MDL. JSG-6 COMBINATION BELT AND DISC SANDER, 1-1/2 HP drive motor, 6"W. belt, 12" dia. disc, tilting tbls. and fabricated stand, S/N 510009.

SANDBLAST POTSSCHMIDT 650-LB. CAP. MDL. 650F, running gear, S/N K5695.

CLEMCO 600-LB. CAP. MDL. 2452, running gear, S/N 11420.

PORTABLE AIR COMPRESSORSINGERSOLL RAND MDL. P375WJD/2000, new 2000, John Deere diesel engine, sgl. axle, trailer mtd., S/N 314291UGK414.

HUSKY, Honda 5-1/2 HP gasoline pwrd. engine, air receiver.

AIR COMPRESSORSSULLAIR MDL. LS160-60A ROTARY SCREW, new 2007, 60 HP motor, air cooled, skid mtd., noise enclosure, receiver tank and filters, on fabricated steel stand, S/N 200-706300040.

HUSKY MDL. VT631401AJ RECIPROCATING, 11.7 SCFM @ 40 PSI, 10.2 SCFM @ 90 PSI, 6-1/2 HP, 60 gal. vert. tank, S/N L4/17/2001-32021.

INGERSOLL RAND MDL. T30, 5 HP motor, 40 gal. hz. receiver, S/N 733259.

MISCELLANEOUS SHOP & WAREHOUSE EQUIPMENT

(8) ACETYLENE BUGGIES; (12) H.D. FABRICATED STEEL STANDS; ASSORTED DRAWING TBLS.; FOREMAN’S DESKS; ASSORTED H.D. FABRICATED STEEL HORS-

ES; WELDED BARSTOCK RACKS; LARGE ASSORTMENT OF BLAST HOSE; 300 GAL. AIR RECEIVING TANK w/fabri-cated stand; APPROX. 10 T. CAP. GRIT TOWER, access ladder, dual chutes, on fabricated steel stand.

BUILT-IN FACING HEAD

LARGE

CAPACITY

JCB 8,000-LB. CAP. ROUGH TERRAIN FORKLIFT

AMERICAN 20 T. ROUGH TERRAIN CRANE

DAEWOO 8,000-LB. CAP. DIESEL FORKLIFT YALE 5,000 LB. CAP. FORKLIFT INGERSOLL RAND PORTABLE AIR COMPRESSOR

HEAVY STRUCTURAL STEEL

LINK-BELT HYDRAULIC ROUGH TERRAIN CRANE

INSPECTION AT BOTH LOCATIONS: Monday, August 1, 9:00 A.M. to 4:00 P.M. & Morning of Sale

2011

3,220

HOURS

HYDRAULIC ROUGH TERRAIN CRANES

LINK-BELT MDL. RTC-8030 SERIES II, new 2001, 30 T. cap., 29'-91'-4" 4-section boom, 25' swing away fly boom, 143' max. tip ht., 20.5r25 rough terrain tires, 4WD, 3,220 hrs. on meter, Microguard 434 load monitor.

AMERICAN MDL. R213, 20 T. cap. extended frame, 16.00-24 rough terrain tires, extendable outriggers, S/N N.A.

ROUGH TERRAIN FORKLIFTJCB 8,000-LB. CAP. MDL. 940, diesel engine, 3-stage mast, 8,000-lb. cap. @ 15' lift, 3,500-lb. cap. @ 30' lift, 42" forks, large dia. pneu. front tires, wide fork carriage, load grate, S/N SLP94002VE0662345.

FORKLIFTSDAEWOO 8,000-LB. CAP. MDL. DA40S, diesel engine, 2-stage mast, 157" max. lift, 36" forks, wide fork car-riage, dual front pneu. tires, S/N 210421T.

YALE 5,000-LB. CAP. MDL. GLC050, new 2011, LPG, 83" triple-stage mast, 192" lift ht., cushion tires, side shift, 42" forks, S/N A910V17116J.

(2) HYSTER 3,000-LB. CAP. MDL. H30FT, new 2008, LPG, 62" standard mast, 90" lift ht., S/N F001V03104F, S/N F001V03167F.

HYSTER APPROX. 2,500-LB. CAP., LPG engine, 2-stage mast, 3-wheel design, 42" forks.

PORTABLE DIESEL TANKUL LISTED, Great Planes air operated pump unit, ap-prox. 500 gal. cap., 12 gauge wall thickness, cradle.

CRANE HOIST & TROLLEY UNITSPACEMASTER 10 T. CAP. MDL. SD-10-35MT15S, crated from factory, updated load brake, load block.

RAW MATERIALLARGE SELECTION OF ASSORTED STRUCTURAL STEEL; H.D. ANGLES up to 8" x 8" x 40'; FLATBAR, CHANNEL; ASSORTED I-BEAMS; ASSORTED PLATE STEEL up to 4" thk. in assorted sizes.

MATERIAL HANDLING EQUIPMENT(16) 3' X 6' H.D. MATERIAL TRANSPORT CARTS; ASSORTED STEP AND EXTENSION LADDERS up to 14' ht.; 1 CU. YD. SELF-DUMPING HOPPER w/forklift entry; ASSORTMENT OF CHAIN, SLINGS AND H.D. SHACKLES in various sizes up to 50 T. cap. 40' CONNEX STORAGE CONTAINER, (2) 20' CONNEX STORAGE CONTAINERS.

ACRA TURN 30" X 120" ENGINE LATHE

SHARP 21" X 120" GAP BED ENGINE LATHEGIDDINGS & LEWIS 4" HORIZ. BORING MILL

DAVIS MDL. 15 KEYSEATER

BRIDGEPORT SERIES II TURRET MILLING MACHINE

MARVEL MDL. 81 TILT FRAME VERT. BANDSAW

IKEDA 4' X 13" RADIAL ARM DRILL

ENGINE LATHESACRA TURN 30" X 120" MDL. CZ6280 GAP BED, 4.1" spndl. hole, spds.: 14–750 RPM, inch/metric thdng., taper attach., 4-jaw chuck, steadyrest, S/N 266.

SUMMIT 21" X 120", 3.15" spndl. hole, spds.: 15–1,500 RPM, inch/metric thdng., taper attach., steadyrest, 3-jaw chuck, quick change toolpost, S/N R120568.

SHARP 21" X 120" GAP BED, 3.15" spndl. hole, spds.: 14–1,500 RPM, inch/metric thdng., taper attach., 4-jaw chuck, steadyrest, quick change toolpost, S/N L30085.

ACRA TURN 21" X 60" MDL. MK530 GAP BED, taper attach., steadyrest, 3-jaw chuck, 3.15" spndl. hole, spndl. spds.: 25–1,500 RPM, inch/metric thdng., S/N K5029061.

HORIZONTAL BORING MILLGIDDINGS & LEWIS 4" MDL. 340T, main spndl. spds.: 10–1,300 RPM, #5 MT spndl. taper, 48" x 62" tbl., approx. 48" vert. travel, 48" cross travel, hardened and ground bed and crossways, assorted spndl. tooling, S/N 7347.

KEYSEATERDAVIS MDL. 15, hold-down arm, centering bracket, assorted hold-downs, auto. feed system, S/N 15-1338.

VERTICAL TURRET MILLSBRIDGEPORT SERIES II, 11" x 58" tbl., 30" X-, 15" Y-, 5" Z-travels, 16" knee travel, power quill feed, #40 spindle taper, 50–3,500 RPM, 4 HP drive motor, S/N 951.

BRIDGEPORT SERIES II SPECIAL, 11" x 58" tbl., 2-axis D.R.O., long. pwr. feed, Bridgeport milling vise, air mist coolant system, S/N 3351S.

TILT FRAME VERTICAL BANDSAWMARVEL MDL. 81-8/M3M/M5, infeed conveyors, hyd. vise, pwr. tilt, spds.: 60–400 FPM, variable infeed, S/N E314788.

RADIAL ARM DRILLIKEDA MDL. RM-1300 4' X 13" COL. #5 MT TAPER, 30–1,440 RPM, 5 HP, plain box tbl., S/N 69189.

Items on This Page Located at

MANUFAB INC.129 E 3rd Street

KENNER, LOUISIANA 70062

They Will Be Sold By Photo

TUESDAY, AUGUST 2 • 10:00 A.M.at 3300 Port & Harbor Drive, Port Bienville Industrial Park

BAY ST. LOUIS, MISSISSIPPI 39520

INSPECTION AT BOTH LOCATIONS:

Monday, August 1 9:00 A.M. to 4:00 P.M.

& Morning of Sale

QS-0032896

P.O. Box 19100Houston, TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

STEEL FABRICATION & MACHINING FACILITIES

Featuring: LINK-BELT RTC-8030 Series II Rough

Terrain Crane w/only 3,220 hours, CNC Flame

Cutter, Horizontal Bandsaws, Hydraulic

Ironworkers, Sandblast Equipment, Horizontal

Boring Mill, Engine Lathes, Welding Machines,

Rough Terrain Forklifts, Radial Arm Drills,

Plus Machine Tools Located in Kenner, LA

to Be Sold by Photo in Bay St. Louis, Horizontal

Boring Mill, Engine Lathe, Vertical Turret Mill,

Keyseater, Radial Arm Drill, More!

BAY ST. LOUIS, MS

AUCTION

PUBLIC INVITEDAUCTION: TUES., AUGUST 2 • 10:00 A.M.:

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

A 15% Buyer’s Premium Will Apply On-site. An 18% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.

Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.

ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.

Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until September 2, 2016.

In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.

Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.

The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.

Buyer agrees to accept assets purchased “AS IS,” WITH “ALL FAULTS” AND “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART

OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.

The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items.

Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the infor-mation herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.

These terms and conditions may be modified or supplemented by language in the catalog avail-able at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.

PARTIAL TERMS & CONDITIONS

UNABLE TO ATTEND?Bid on-line in real time atTO PARTICIPATE YOU MUST:1. Register at www.BidSpotter.com. Use the link to

BidSpotter on PMI’s website calendar. DO IT NOW.2. Either send wire transfer, or, overnight delivery service a

cashier’s check deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery Inc. 1304 Langham Creek Drive, Suite 454, Houston, TX 77084 Wire transfer instructions can be found at pmi-auction.com

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.If you need assistance, don’t hesitate to call (713) 691-4401.ALL WEBCAST BIDS ARE SUBJECT TO AN 18% BUYER’S PREMIUM.

DIRECTIONSFROM GULFPORT/BILOXI INT’L. AIRPORT: Exit airport using Highway 49/US 49 N. Merge onto I-10 W toward New Orleans and proceed approx. 20-1/2 miles. Take the MS-43/MS-603 toward Bay St. Louis/Picayune. Turn left onto MS-43/MS-603/Nicholson Ave. and proceed approx. 4 miles. Turn right onto Kiln Waveland Cutoff Rd. and proceed approx. 1-1/2 miles. Turn right onto Hwy. 90/US-90 W and proceed approx. 3-1/2 miles. Turn left onto Lakeshore Rd./County Hwy. 101 and proceed approx. 2-1/2 miles. Turn right onto County Rd. 1106/County Hwy. 1106 and proceed approx. 3 miles. Stay straight onto Lower Bay Rd. and proceed approx. 3 miles. Turn left onto Port and Harbor Dr. and proceed approx. 2 miles to auction site, 3300 Port and Harbor Dr. Watch for auction signs

LODGINGHampton Inn & Suites Gulfport ..................................................(228) 539-0601 15580 Daniel Blvd., Gulfport, MS 39503

Holiday Inn Gulfport ................................................................... (877) 410-6681 9515 Hwy. 49, Gulfport, MS 39503

FINANCE YOUR AUCTION

PURCHASEConserve Your Cash &

Increase Your Bidding Power

AuctionLea$e Provides M&E Financing

With Approvals from $5,000 to $999,000

(800) 438-1470

Apply Online:www.AuctionLease.com