Manually configuring a Polycom SoundPoint IP 320, 321, 330, 331, 450, 550, 560, 650, 670and SoundStation IP 6000, 7000 with 3CX Phone System

Note 1: This guide has been tested with firmware version 3.3.1 and Bootrom 4.3.0. Be aware that different firmware revisions may

have different web interface formats and functionality.

Note 2: This FAQ is based on a new phone OR one that has been reset to factory defaults. If in doubt, reset the phone to Factory

Defaults.

Manually configuring a Polycom SoundPoint IP 320, 321, 330, 331, 450,... http://www.3cx.com/sip-phones/polycom-soundpoint/

1 of 2 13/07/2013 11:03 AM

d. Set the “Auth Password” field to the extension’s Authentication Password.

In the “Server 1″ section of the “Lines” tab:

a. Set the “Address” field to the IP Address of the 3CX Phone System machine – in this example, 10.0.0.11.

b. Set the “Port” field to 5060, which is the default – you can check the correct value from the “Settings -> Network” page in

the 3CX Management Console

5.

In the “Local Settings” section of the “SIP” page, set the “Digitmap” field to blank by removing all the contents.6.

Click the “Submit” button at the bottom of the page. Your phone will restart. After rebooting, the phone will register with 3CX

Phone System. This can be verified via the “Extension Status” page of the 3CX Management Console.

7.

SIP Phone Configuration Guides (Preferred)

3CXPhone for Android (Provisioned)

3CXPhone for iPhone

3CXPhone for Windows

CISCO SPA 501G, 502G, 504G, 508G, 509G, 525G (Manual configuration)

CISCO SPA 501G, 502G, 504G, 508G, 509G, 525G (Provisioned)

How to auto-provision IP phones with DHCP ‘option 66′

GrandStream GXP-1450, 2110, 2120, 2124, and GXP 2100 (Provisioned)

SIP Phone Configuration Guides (Supported)

GrandStream GXP-2000 (Manual configuration)

GrandStream GXP-2000, 280, 1200, GXP 2010 and GXP-2020 (Provisioned)

GrandStream HandyTone 386 ATA

GrandStream HandyTone 486(487),286(287) ATA

Linksys 3102 ATA and Fax – T38 Fax Pass-through

Linksys SPA 901, 921, 941, 922, 942, 962 (Manual configuration)

Linksys SPA 901, 921, 941, 922, 942, 962(Provisioned)

Polycom KIRK Wireless Server 300

Polycom SoundPoint IP 320, 321, 330, 331, 335, 450, 550, 560, 650, 670(Provisioned)

Polycom SoundStation IP6000

Yealink T20, T22, T26, T28 (Manual configuration)

Yealink T20, T22, T26, T28 (Provisioned)

Manually configuring a Polycom SoundPoint IP 320, 321, 330, 331, 450,... http://www.3cx.com/sip-phones/polycom-soundpoint/

2 of 2 13/07/2013 11:03 AM