Manuale per l’installazione e l’uso Installation and operation manual · 2015-07-17 ·...

46516.212Videocamera IR impermeabile AHD

AHD Waterproof IR Camera

Manuale per l’installazione e l’usoInstallation and operation manual

2

DESCRIPTIONThe waterproof IR camera adopt 1.3 mega pixels 720P@25/30fps high performance AHD sensor. The camera adopt new material with IP66 wa-terproof standard, IR-CUT filter, smart-IR control. Fashionable and profes-sional design.

ATTENTIONThank you for your purchasing this product. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.

70

.0m

m

5.0

mm

CAUTION

RISK OF ELECTRICSHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL

1. Use the Appropriate Power Supply The input power for the camera is DC12V. Be sure to connect it to the

appropriate power. Wrong connection may cause malfunction and/or damage to the video camera.

2. Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws or covers. There are

no user serviceable parts inside. Ask a qualified service person for ser-vicing.

3. Handle the camera with care. Do not abuse the camera. Avoid striking, shaking, etc. The camera could

be damaged by improper handling or storage.4. Do note use strong or abrasive detergents when cleaning the camera

body. Use a dry cloth to clean the camera when dirty. In case the dirt is hard

to remove. Use a mild detergent and wipe gently.5. Clean the sensor faceplate with care. When cleaning the sensor panel, do not use strong or abrasive deter-

gents.Use a piece of lens tissue or cotton tipped applicator and ethanol.6. Do not attempt to aim the camera at the sun Do not attempt to aim the camera at the sun or other extremely bright-

objects that causes mear to appear irrespective of whether the camera is operating or not.

This can damage the sensor.7. Do not put the camera in a place with interference. When this camera is installed near the equipment like wireless commu-

nication device which emits strong electromagnetic field, some irregu-larity such as noise on monitor screen may happen.

FEATURES- 1.3Megapixel high performance CMOS sensor with 25/[email protected] Built in IR-CUT, ensure the camera work properly both day and night.- IP66 waterproof standard.- Long-life IR LED design, whose brightness is several times higher and

service life longer than ordinary LED’s- SMART-IR, 50meters IR range- Image transmission up to 500 meters.

70

.0m

m

5.0

mm

CAUTION






IR Sensitivity

Long-effective IR Light Source Design

Service Life

Other brands

DESCRIZIONELa telecamera IR impermeabile adotta un sensore AHD ad elevate pre-stazioni da 1.3 mega pixel 720P a 25/30fps. La telecamera utilizza un nuovo materiale con classe di impermeabilità IP66, filtro IR-CUT, controllo smart-IR. Design moderno e professionale.

ATTENZIONEGrazie per aver acquistato questo prodotto. Prima di cercare di collegare o utilizzare il prodotto, leggere attentamente le istruzioni e conservare il manuale per consultazione futura.

70

.0m

m

5.0

mm

CAUTION






1. Utilizzare una rete di alimentazione appropriata. La tensione di ingresso della telecamera è 12 VCC. Assicurarsi di colle-

garla a una sorgente di alimentazione idonea. Una connessione errata può causare malfunzionamenti e/o danneggiare la telecamera.

2. Non cercare di smontare la telecamera. Per evitare il rischio di scosse elettriche, non rimuovere viti o coperchi.

All’interno non vi sono parti che possono essere riparate dall’utente. Per l’assistenza rivolgersi a un tecnico qualificato.

3. Maneggiare la telecamera con cura. Non utilizzare la telecamera in modo improprio. Evitare colpi, scossoni

e simili. La telecamera potrebbe riportare danni a seguito di utilizzo o conservazione non idonei.

4. Non utilizzare detergenti aggressivi o abrasivi per pulire il corpo della telecamera.

Se la telecamera è sporca, passare un panno asciutto. Se lo sporco risulta difficile da rimuovere, utilizzare un detergente delicato e strofinare leggermente.

5. Pulire la piastra anteriore del sensore con cautela. Per pulire il pannello del sensore, non utilizzare detergenti aggressivi o

abrasivi. Utilizzare carta per la pulizia di obiettivi o la punta di un baston-cino cotonato inumidito con alcol.

6. Non cercare di puntare la telecamera verso il sole Non cercare di puntare la telecamera verso il sole o altri oggetti molto

luminosi che farebbero comparire macchie anche se la videocamera non è in uso.

Si potrebbe danneggiare il sensore.7. Non collocare la telecamera in luoghi soggetti a interferenza. Quando la telecamera è installata vicino ad apparecchiature come di-

spositivi che comunicano in wireless, che emettono forti campi elettro-magnetici, potrebbero verificarsi alcune irregolarità quali rumore sullo schermo del monitor.

FUNZIONI- Sensore CMOS a prestazioni elevate da 1.3 Megapixel con 25/30fps a

720P.- IR-CUT incorporato, assicura che la telecamera funzioni correttamente

di giorno e di notte.- Classe di impermeabilità IP66.- Design LED IR a lunga durata, con luminosità molto superiore e durata

utile molto più lunga rispetto ai normali LED.- SMART-IR, range IR di 50 metri- Trasmissione immagine fino a 500 metri.

ENI

70

.0m

m

5.0

mm

CAUTION






Design sorgente di luce IR a lunga efficacia

Altri marchi

Durata utile

Sensibilità IR

1 anno 2 anno 3 anno 4 anno

3

Camera Installation 1. Fix the camera to the needed place with the four pieces of screws.2. Loosen the horizontal adjusting ring, adjust it to the needed place, then

fix the horizontal adjusting ring.3. Loosen the angle fixing screw, adjust it to the needed place, then fix the

angle fixing screw.

SPECIFICATIONModel 46516.212Sensor 720P Sensor

Effective Pixels 1288(H) x 968(V)Video Frame Rate 25/30fps@720P

Max.transmission distance 500 m, with art. 46364.500Video format PAL/NTSC

Mini-illumination 0 Lux (IR ON)S/N Ration More than 50 dB (with AGC OFF)

OSD English/Chinese/RUS/FRA/NED/TUR/POR/SPA/ITA/GER/POL

AGC 0-15White Balance ATW/AWC-SET/INDOOR/OUTDOOR/

MANUAL/AWBBacklight BLC/OFF/HSBLC

NR 2DNR/3DNRSpec Fun D-WDR/DEFOG/Mirror/NEG IMAGE/FRE-

EZE/ PRIVACY/MOTION/SENS-UPShutter Speed AUTO/(1/25-1/50,000 x2-x30)

Sync code InternalVoltage 12 VdcCurrent 700 mA±15% (IR ON); 65 mA±10% (IR OFF)

DAY/NIGHT EXT/AUTO/COLOR/B/WLens 2.8-12 mm HD Lens

IR range 50 mWaterproof standard IP 66

Video output CVBS/AHDStorage temperature -20°C ~70°COperate Temperature -10°C~50°C RH90% MAX

Size 261 mm (L) x 118 mm (H) x 76 mm (P)Weight 865 g

ENI

PARTS INSTRUCTION AND INSTALLATION

*Specifications subject to change without notice.

SPECIFICHE

Installazione della telecamera 1. Fissare la telecamera dove si necessita con le quattro viti in dotazione.2. Allentare l’anello di regolazione orizzontale, regolare dove si necessita,

quindi fissare l’anello di regolazione orizzontale.3. Allentare la vite di fissaggio per l’angolazione, regolare dove si neces-

sita, quindi fissare la vite di fissaggio dell’angolo.

ISTRUZIONI E INSTALLAZIONE DELLE PARTI

261

170

94

118

Ø76

∅80

1 2 3

fuoco zoom

261

170

94

118

Ø76

∅80

1 2 3

focus zoom

AHDCVBS AHDCVBS

UP UP

DIMENSION (mm)DIMENSIONI (mm)261

170

ø76

ø80

9411

8

Tenere premuto verso destra per set-tare la telecamera in AHD, tenere premuto verso sinistra per settare la telecamera in CVBS, tenendo premuto verso il basso, la telecamera commuta alternativamente PAL e NTSC.

Hold to the right to set the camera in AHD, hold to the left to set the camera in CVBS, holding down, the camera switches alternately PAL and NTSC.

Modello 46516.212Sensore Sensore 720P

Pixel effettivi 1288 (H) x 968 (V)Frame rate video 25/30fps a 720P

Distanza massima trasmissione 500 m, con art. 46364.500Formato video PAL/NTSC

Illuminazione min. 0 Lux (con IR ON)Rapporto S/N Più di 50 dB (con AGC OFF)

OSD Inglese/Cinese/RUS/FRA/OLA/TUR/POR/SPA/ITA/TED/POL

AGC 0-15Bilanciamento del bianco ATW/AWC-SET/INTERNO/ESTERNO/

MANUALE/AWBControluce BLC/OFF/HSBLC

NR (Riduzione rumore) 2DNR/3DNR (Riduzione rumore digitale)Spec Fun (Funzioni speciali) D-WDR/DEFOG/Specchio/NEG IMAGE/

FREEZE/ PRIVACY/MOTION/SENS-UPVelocità otturatore AUTO/(1/25-1/50.000 x2-x30)

Codice Sync InternoTensione 12 VdcCorrente 700 mA ± 15% (IR ON); 65 mA ± 10% (IR OFF)

DAY/NIGHT (Giorno/Notte) EXT/AUTO/COLORE/B/NObiettivo Obiettivo HD da 2,8 - 12 mmRaggio IR 50 m

Classe di impermeabilità IP 66Uscita video CVBS/AHD

Temperatura di stoccaggio -20°C ~70°CTemperatura di esercizio -10°C~50°C RH 90% MAX

Dimensioni 261 mm (L) x 118 mm (H) x 76 mm (P)Peso 865 g

*Le specifiche sono soggette a modifiche senza preavviso.

261

170

ø76

ø80

9411

8

4 ENI

MENUPremere il pulsante MENU per visualizzare il menu. È possibile impostare le funzioni OBIETTIVO, ESPOSIZIONE, BILANCIAMENTO DEL BIANCO, RETROILLUMINAZIONE, NR, DIURNO NOTTURNO, SPECIALE e RE-GOLAZIONE SISTEMA per assicurare la qualità dell’immagine.

OBIETTIVO:In base al tipo di obiettivo è possibile accedere al sottomenu e impostare la modalità su INTERNI o ESTERNI. È inoltre possibile regolare IRIS SPEED (velocità diaframma) secondo le esigenze.

ESPOSIZIONE:Premere il pulsante MENU per visualizzare il sottomenu ESPOSIZIONE, è possibile impostare OTTURATORE, AGC, SENS-UP, LUMINOSITÀ, D-WDR, ANTICONDENSA in base alle esigenze.

MENUPress the MENU button to display MENU. You can set the LENS, EXPO-SURE, WHITE BAL, BACKLIGHT, NR, DAY&NIGHT, SPECIAL and SYS-TEM ADJUST to ensure the image quality.

MENU

1.LENS

2.EXPOSURE

DC MANUAL( )

3.BACKLIGHT

5. NIGHTDAY

7.SPECIAL

8.ADJUST

4.WHITE BAL

6.NR

EXT AUTO COLOR B/W( )

OFF BLC ( HSBLC )

ATW AWC SET INDOOR

OUTDOOR MANUAL AWB

(

)

9.EXIT

DC LENS MODE1.MODE

2.IRIS SPEED

INDOOR OUTDOOR ( )

3.RETURN RET SAVE&END ( )

5 (0-15)

OUTDOOR MODE

EXPOSURE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.BRIGHTNESS

5.D-WDR

6.DEFOG

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET (SAVE&END )

RET (SAVE&END )

37(1-100)

1.SHUTTER

1.MIN SHU

(0-15)

SENS-UP

X2(X4 X6 X8 X10 X15 X20 X25 X30)1.SENS-UP

2.AGC RET (SAVE&END )

D-WDR1.LEVEL

2.RETURN RET (SAVE&END )

(0-8)

DEFOG


1.POS/SIZE

2.GRADATION

3.DEFAULT

0(0-22)

POS/SI ZE

POSITION RET AGAINSIZE

BLC


1.LEVEL

2.AREA

3.DEFAULT

MIDDLE(HIGH LOW)

POS/SIZE


HSBLC

5.MODE

6.DEFAULT

7.RETURN

ALL DAY(NIGHT )

4.LEVEL

AREA1(AREA1-AREA4)1.SELECT

2.DISPLAY

3.BLACK MASK

ON (OFF )

ON(OFF)

RET (SAVE&END )

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET (SAVE&END )

MANUAL WB1.BLUE

2.RED

RET (SAVE&END )3.RETURN

50(0-100)

50(0-100)

D&N EXT

2.N D(DELAY)


1(0-60)

1(0-60)1.D N(DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET (SAVE&END )

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/W

RET (SAVE&END )

1.LEVEL

2.AREA

3.RETURN

IR SMART

RET (SAVE&END )

3(0-15)

AREA

POSITION RET AGA I NSIZE

1.2DNR

2.3DNR

3.RETURN

NR

RET (SAVE&END )

HIGH(OFF LOW MIDDLE)

LOW(MIDDLE HIGH OFF)

5.LANGUAGE CHNI (CHNI GER FRA ITA

SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.CAM TITLE

2.D-EFFECT

3.MOTION

SPECIAL

6.DEFECT

7.RS485


OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.FREEZE

2.MIRROR

3.NEG.IMAGE

D-EFFECTOFF(ON)

OFF(ON)

RET (SAVE&END )

OFF(MIRROR V-FLIP ROTATE)

6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)

4.COLOR GREEN(BLUE WHITE RED)

AREA1(AEREA1-AEREA4)1.SELECT

2.DISPLAY

3.SENSITIVITY

ON (OFF)

MOTION


64(0-100)

6.RETURN

5.TIME

4. ALARM SIG HIGH(LOW)

ALL(OFF BLOCK OUTLINE)1.VIEW TYPE

2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET (SAVE&END )

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DEFECT

RET (SAVE&END )

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LEVEL

3.RETURN

LIVE DPC

RET (SAVE&END )

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

WHITE DPC

RET (SAVE&END )

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

BLACK DPC

RET (SAVE&END )

255(0-255)

4.RETURN

1.CAM ID

2.ID DISPLAY

3.BAUDRATE

RS485

RET (SAVE&END )

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.SHARPNESS

2.MONI TOR

3.LSC ON(OFF)

ADJUST

RET (SAVE&END )

LCD (CTR )

AUTO (OFF)

PAL

4.RETURN

1.L EVEL

2.START AGC

3.END AGC

SHARPNESS

RET (SAVE&END )

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.BLACK LEVEL

1.BLACK LEVEL

2.BLUE GAIN

2.GAMMA

3.RED GAIN

CRT

LCD

RET (SAVE&END )

RET (SAVE&END )

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.BLUE GAIN

4.RED GAIN

USER(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100)

CAM TITLE

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.EXIT

1.ACG

SAVE&END ( )

DISPLAY



POS/SIZE


LENS:According to the lens type, you can enter the sub menu and setup the MODE to INDOOR OR OUTDOOR. Also you can adjust the IRIS SPEED as needed.

MENU

1.LENS

2.EXPOSURE

DC MANUAL( )

3.BACKLIGHT

5. NIGHTDAY

7.SPECIAL

8.ADJUST

4.WHITE BAL

6.NR


OFF BLC ( HSBLC )

ATW AWC SET INDOOR

OUTDOOR MANUAL AWB

(

)

9.EXIT

DC LENS MODE1.MODE

2.IRIS SPEED

INDOOR OUTDOOR ( )


5 (0-15)

OUTDOOR MODE

EXPOSURE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.BRIGHTNESS

5.D-WDR

6.DEFOG

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET (SAVE&END )

RET (SAVE&END )

37(1-100)

1.SHUTTER

1.MIN SHU

(0-15)

SENS-UP



D-WDR1.LEVEL


(0-8)

DEFOG


1.POS/SIZE

2.GRADATION

3.DEFAULT

0(0-22)

POS/SI ZE


BLC


1.LEVEL

2.AREA

3.DEFAULT

MIDDLE(HIGH LOW)

POS/SIZE


HSBLC

5.MODE

6.DEFAULT

7.RETURN

ALL DAY(NIGHT )

4.LEVEL


2.DISPLAY

3.BLACK MASK

ON (OFF )

ON(OFF)

RET (SAVE&END )

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET (SAVE&END )

MANUAL WB1.BLUE

2.RED


50(0-100)

50(0-100)

D&N EXT

2.N D(DELAY)


1(0-60)

1(0-60)1.D N(DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET (SAVE&END )

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/W

RET (SAVE&END )

1.LEVEL

2.AREA

3.RETURN

IR SMART

RET (SAVE&END )

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET (SAVE&END )




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.CAM TITLE

2.D-EFFECT

3.MOTION

SPECIAL

6.DEFECT

7.RS485


OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.FREEZE

2.MIRROR

3.NEG.IMAGE

D-EFFECTOFF(ON)

OFF(ON)

RET (SAVE&END )


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.DISPLAY

3.SENSITIVITY

ON (OFF)

MOTION


64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET (SAVE&END )

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DEFECT

RET (SAVE&END )

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LEVEL

3.RETURN

LIVE DPC

RET (SAVE&END )

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

WHITE DPC

RET (SAVE&END )

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

BLACK DPC

RET (SAVE&END )

255(0-255)

4.RETURN

1.CAM ID

2.ID DISPLAY

3.BAUDRATE

RS485

RET (SAVE&END )

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.SHARPNESS

2.MONI TOR

3.LSC ON(OFF)

ADJUST

RET (SAVE&END )

LCD (CTR )

AUTO (OFF)

PAL

4.RETURN

1.L EVEL

2.START AGC

3.END AGC

SHARPNESS

RET (SAVE&END )

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.BLACK LEVEL

1.BLACK LEVEL

2.BLUE GAIN

2.GAMMA

3.RED GAIN

CRT

LCD

RET (SAVE&END )

RET (SAVE&END )

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.BLUE GAIN

4.RED GAIN

USER(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100)

CAM TITLE

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.EXIT

1.ACG

SAVE&END ( )

DISPLAY



POS/SIZE


EXPOSURE:Press the MENU button to display EXPO submenu, you can setup the SHUTTER, AGC, SENS-UP, BRIGHTNESS, D-WDR, DEFOG as needed.

MENU

1.LENS

2.EXPOSURE

DC MANUAL( )

3.BACKLIGHT

5. NIGHTDAY

7.SPECIAL

8.ADJUST

4.WHITE BAL

6.NR


OFF BLC ( HSBLC )

ATW AWC SET INDOOR

OUTDOOR MANUAL AWB

(

)

9.EXIT

DC LENS MODE1.MODE

2.IRIS SPEED

INDOOR OUTDOOR ( )


5 (0-15)

OUTDOOR MODE

EXPOSURE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.BRIGHTNESS

5.D-WDR

6.DEFOG

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET (SAVE&END )

RET (SAVE&END )

37(1-100)

1.SHUTTER

1.MIN SHU

(0-15)

SENS-UP



D-WDR1.LEVEL


(0-8)

DEFOG


1.POS/SIZE

2.GRADATION

3.DEFAULT

0(0-22)

POS/SI ZE


BLC


1.LEVEL

2.AREA

3.DEFAULT

MIDDLE(HIGH LOW)

POS/SIZE


HSBLC

5.MODE

6.DEFAULT

7.RETURN

ALL DAY(NIGHT )

4.LEVEL


2.DISPLAY

3.BLACK MASK

ON (OFF )

ON(OFF)

RET (SAVE&END )

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET (SAVE&END )

MANUAL WB1.BLUE

2.RED


50(0-100)

50(0-100)

D&N EXT

2.N D(DELAY)


1(0-60)

1(0-60)1.D N(DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET (SAVE&END )

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/W

RET (SAVE&END )

1.LEVEL

2.AREA

3.RETURN

IR SMART

RET (SAVE&END )

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET (SAVE&END )




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.CAM TITLE

2.D-EFFECT

3.MOTION

SPECIAL

6.DEFECT

7.RS485


OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.FREEZE

2.MIRROR

3.NEG.IMAGE

D-EFFECTOFF(ON)

OFF(ON)

RET (SAVE&END )


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.DISPLAY

3.SENSITIVITY

ON (OFF)

MOTION


64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET (SAVE&END )

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DEFECT

RET (SAVE&END )

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LEVEL

3.RETURN

LIVE DPC

RET (SAVE&END )

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

WHITE DPC

RET (SAVE&END )

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

BLACK DPC

RET (SAVE&END )

255(0-255)

4.RETURN

1.CAM ID

2.ID DISPLAY

3.BAUDRATE

RS485

RET (SAVE&END )

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.SHARPNESS

2.MONI TOR

3.LSC ON(OFF)

ADJUST

RET (SAVE&END )

LCD (CTR )

AUTO (OFF)

PAL

4.RETURN

1.L EVEL

2.START AGC

3.END AGC

SHARPNESS

RET (SAVE&END )

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.BLACK LEVEL

1.BLACK LEVEL

2.BLUE GAIN

2.GAMMA

3.RED GAIN

CRT

LCD

RET (SAVE&END )

RET (SAVE&END )

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.BLUE GAIN

4.RED GAIN

USER(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100)

CAM TITLE

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.EXIT

1.ACG

SAVE&END ( )

DISPLAY



POS/SIZE


MENU

1.OBIETTIVO

2.ESPOSIZIONE

DC MANUALE)(

3.RETROILLUM

5.DIURNO/NOTTURNO

7.SPECIAL

8.ADEGUARE

4.BIL. BIANCO

6.N

USC AUTO COLOR B/W( )

OFF BLC ( HSBLC )

ATW AWC SET INTERNI

ESTERNI MANUALE AWB

(

)

9.

DC LENS MODE1.MODO

2.IRIS SPEED

INTERNI ESTERNI( )

3.RETURN RET

5 (0-15)

OUTDOOR MODE

ESPOSIZIONE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.LUMINOS

5.D-WDR

6.ANTI CONDENSA

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET

RET (

37(1-100)

1.OTTURATORE

1.MIN SHU

(0-15)

SENS-UP


2. RET

D-WDR1.LIVELLO

2.RETURN RET

(0-8)

ANTI CONDENSA

4.RETURN RET

1.POS/DIMEN

2.GRADAZIONE

3.DEFAULT

0(0-22)

POS/SI ZE


BLC

4.RETURN RET

1.LIVELLO

2.AREA

3.DEFAULT

MEDIO ( )

POS/SIZE


HSBLC

5.MODO

6.DEFAULT

7.RETURN

ALL DAY(NOTTE )

4.LIVELLO

AREA1(AREA1-AREA4)1.SELEZIONA

2.VISUAL ID

3.MASCH NERA

ON (OFF )

ON(OFF)

RET

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET

MANUALE WB1.BLU

2.ROSSO

RET3.RETURN

50(0-100)

50(0-100)

D&N EXT

2.N D (DELAY)

RET3.RETURN

1(0-60)

1(0-60)1.D N ( DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/N

RET

1.LIVELLO

2.AREA

3.RETURN

IR SMART

RET

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET

ALTO(OFF BASSO MEDIO)

BASSO( MEDIO ALTO OFF)

5.LINGUA CHN CHN GER FRA ITA

SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.TITOLO CAM

2.EFFETTO D

3.MOVIMENTO

SPECIAL

6.DIFETTO

7.RS485

8.RETURN RET

OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.BLOCCA

2.INVER

3.IMMAGINE NEG

EFFETTO DOFF(ON)

OFF(ON)

RET

OFF(INVER V-FLIP ROTATE)

6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)

4.COLORE GREEN(BLUE WHITE RED)

AREA1(AEREA1-AEREA4)1.SELEZIONA

2.VISUAL ID

3.SENSIBILITA’

ON (OFF)

MOVIMENTO

8.RETURN RET

64(0-100)

6.RETURN

5.TIME

4. ALARM SIG ALTO(BASSO)


2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DIFET TO

RET

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LIVELLO

3.RETURN

LIVE DPC

RET

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

WHITE DPC

RET

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

BLACK DPC

RET

255(0-255)

4.RETURN

1.ID CAM

2.VISUAL ID

3.BAUDRATE

RS485

RET

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.NITIDEZZA

2.MONI TOR

3.LSC ON(OFF)

ADEGUARE

RET

LCD (C TR

AUTO (OFF)

PAL

4.RETURN

1.LIVELLO

2.START AGC

3.END AGC

NITIDEZZA

RET

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.LIV NERO

1.LIV NERO

2.GUAD BLU

2.GAMMA

3.GUAD ROSSO

CRT

LCD

RET

RET

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.GUAD BLU

4.GUAD ROSSO

UTENTE(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.USCITA

1.ACG

FINE ( )

DISPLAY



POS/SIZE


FINE )

FINE ( )

.RETURN

( FINE )

( FINE )

( FINE )

( FINE )

ALTO BASSO

(FINE )

( FINE )

(FINE )

(FINE )

(FINE )

(FINE )

(FINE )

FINE ( )

FINE ( )

TITOLO CAM

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

(FINE )

(FINE )

)

(FINE )

(FINE )

(FINE )

)

FINE ( )

MENU

1.OBIETTIVO

2.ESPOSIZIONE

DC MANUALE)(

3.RETROILLUM

5.DIURNO/NOTTURNO

7.SPECIAL

8.ADEGUARE

4.BIL. BIANCO

6.N


OFF BLC ( HSBLC )

ATW AWC SET INTERNI

ESTERNI MANUALE AWB

(

)

9.

DC LENS MODE1.MODO

2.IRIS SPEED

INTERNI ESTERNI( )

3.RETURN RET

5 (0-15)

OUTDOOR MODE

ESPOSIZIONE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.LUMINOS

5.D-WDR

6.ANTI CONDENSA

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET

RET (

37(1-100)

1.OTTURATORE

1.MIN SHU

(0-15)

SENS-UP


2. RET

D-WDR1.LIVELLO

2.RETURN RET

(0-8)

ANTI CONDENSA

4.RETURN RET

1.POS/DIMEN

2.GRADAZIONE

3.DEFAULT

0(0-22)

POS/SI ZE


BLC

4.RETURN RET

1.LIVELLO

2.AREA

3.DEFAULT

MEDIO ( )

POS/SIZE


HSBLC

5.MODO

6.DEFAULT

7.RETURN

ALL DAY(NOTTE )

4.LIVELLO


2.VISUAL ID

3.MASCH NERA

ON (OFF )

ON(OFF)

RET

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET

MANUALE WB1.BLU

2.ROSSO

RET3.RETURN

50(0-100)

50(0-100)

D&N EXT

2.N D (DELAY)

RET3.RETURN

1(0-60)

1(0-60)1.D N ( DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/N

RET

1.LIVELLO

2.AREA

3.RETURN

IR SMART

RET

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.TITOLO CAM

2.EFFETTO D

3.MOVIMENTO

SPECIAL

6.DIFETTO

7.RS485

8.RETURN RET

OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.BLOCCA

2.INVER

3.IMMAGINE NEG

EFFETTO DOFF(ON)

OFF(ON)

RET


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.VISUAL ID

3.SENSIBILITA’

ON (OFF)

MOVIMENTO

8.RETURN RET

64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DIFET TO

RET

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LIVELLO

3.RETURN

LIVE DPC

RET

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

WHITE DPC

RET

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

BLACK DPC

RET

255(0-255)

4.RETURN

1.ID CAM

2.VISUAL ID

3.BAUDRATE

RS485

RET

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.NITIDEZZA

2.MONI TOR

3.LSC ON(OFF)

ADEGUARE

RET

LCD (C TR

AUTO (OFF)

PAL

4.RETURN

1.LIVELLO

2.START AGC

3.END AGC

NITIDEZZA

RET

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.LIV NERO

1.LIV NERO

2.GUAD BLU

2.GAMMA

3.GUAD ROSSO

CRT

LCD

RET

RET

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.GUAD BLU

4.GUAD ROSSO

UTENTE(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.USCITA

1.ACG

FINE ( )

DISPLAY



POS/SIZE


FINE )

FINE ( )

.RETURN

( FINE )

( FINE )

( FINE )

( FINE )

ALTO BASSO

(FINE )

( FINE )

(FINE )

(FINE )

(FINE )

(FINE )

(FINE )

FINE ( )

FINE ( )

TITOLO CAM

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

(FINE )

(FINE )

)

(FINE )

(FINE )

(FINE )

)

FINE ( )

MENU

1.OBIETTIVO

2.ESPOSIZIONE

DC MANUALE)(

3.RETROILLUM

5.DIURNO/NOTTURNO

7.SPECIAL

8.ADEGUARE

4.BIL. BIANCO

6.N


OFF BLC ( HSBLC )

ATW AWC SET INTERNI

ESTERNI MANUALE AWB

(

)

9.

DC LENS MODE1.MODO

2.IRIS SPEED

INTERNI ESTERNI( )

3.RETURN RET

5 (0-15)

OUTDOOR MODE

ESPOSIZIONE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.LUMINOS

5.D-WDR

6.ANTI CONDENSA

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET

RET (

37(1-100)

1.OTTURATORE

1.MIN SHU

(0-15)

SENS-UP


2. RET

D-WDR1.LIVELLO

2.RETURN RET

(0-8)

ANTI CONDENSA

4.RETURN RET

1.POS/DIMEN

2.GRADAZIONE

3.DEFAULT

0(0-22)

POS/SI ZE


BLC

4.RETURN RET

1.LIVELLO

2.AREA

3.DEFAULT

MEDIO ( )

POS/SIZE


HSBLC

5.MODO

6.DEFAULT

7.RETURN

ALL DAY(NOTTE )

4.LIVELLO


2.VISUAL ID

3.MASCH NERA

ON (OFF )

ON(OFF)

RET

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET

MANUALE WB1.BLU

2.ROSSO

RET3.RETURN

50(0-100)

50(0-100)

D&N EXT

2.N D (DELAY)

RET3.RETURN

1(0-60)

1(0-60)1.D N ( DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/N

RET

1.LIVELLO

2.AREA

3.RETURN

IR SMART

RET

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.TITOLO CAM

2.EFFETTO D

3.MOVIMENTO

SPECIAL

6.DIFETTO

7.RS485

8.RETURN RET

OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.BLOCCA

2.INVER

3.IMMAGINE NEG

EFFETTO DOFF(ON)

OFF(ON)

RET


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.VISUAL ID

3.SENSIBILITA’

ON (OFF)

MOVIMENTO

8.RETURN RET

64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DIFET TO

RET

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LIVELLO

3.RETURN

LIVE DPC

RET

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

WHITE DPC

RET

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

BLACK DPC

RET

255(0-255)

4.RETURN

1.ID CAM

2.VISUAL ID

3.BAUDRATE

RS485

RET

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.NITIDEZZA

2.MONI TOR

3.LSC ON(OFF)

ADEGUARE

RET

LCD (C TR

AUTO (OFF)

PAL

4.RETURN

1.LIVELLO

2.START AGC

3.END AGC

NITIDEZZA

RET

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.LIV NERO

1.LIV NERO

2.GUAD BLU

2.GAMMA

3.GUAD ROSSO

CRT

LCD

RET

RET

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.GUAD BLU

4.GUAD ROSSO

UTENTE(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.USCITA

1.ACG

FINE ( )

DISPLAY



POS/SIZE


FINE )

FINE ( )

.RETURN

( FINE )

( FINE )

( FINE )

( FINE )

ALTO BASSO

(FINE )

( FINE )

(FINE )

(FINE )

(FINE )

(FINE )

(FINE )

FINE ( )

FINE ( )

TITOLO CAM

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

(FINE )

(FINE )

)

(FINE )

(FINE )

(FINE )

)

FINE ( )

5ENI

BILANCIAMENTO DEL BIANCO:Premere il pulsante menu, spostare il cursore su BIL. BIANCO. È possibile impostare la MODALITÀ su ATW, AWB e MANUAL WB. È inoltre possi-bile visualizzare il sottomenu per impostare gli altri indicatori secondo le esigenze.

D&N:Premere il pulsante menu, spostare il cursore su DIURNO NOTTURNO. È possibile impostare la modalità su AUTO, COLOR e B/W. È inoltre pos-sibile visualizzare il sottomenu per impostare gli altri indicatori secondo le esigenze.

RETROILLUMINAZIONEPremere il pulsante menu, spostare il cursore su RETROILLUMINAZIONE. È possibile impostare la modalità su OFF, BLC e HSBLC. È inoltre possi-bile visualizzare il sottomenu per impostare gli altri indicatori secondo le esigenze.

MENU

1.LENS

2.EXPOSURE

DC MANUAL( )

3.BACKLIGHT

5. NIGHTDAY

7.SPECIAL

8.ADJUST

4.WHITE BAL

6.NR


OFF BLC ( HSBLC )

ATW AWC SET INDOOR

OUTDOOR MANUAL AWB

(

)

9.EXIT

DC LENS MODE1.MODE

2.IRIS SPEED

INDOOR OUTDOOR ( )


5 (0-15)

OUTDOOR MODE

EXPOSURE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.BRIGHTNESS

5.D-WDR

6.DEFOG

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET (SAVE&END )

RET (SAVE&END )

37(1-100)

1.SHUTTER

1.MIN SHU

(0-15)

SENS-UP



D-WDR1.LEVEL


(0-8)

DEFOG


1.POS/SIZE

2.GRADATION

3.DEFAULT

0(0-22)

POS/SI ZE


BLC


1.LEVEL

2.AREA

3.DEFAULT

MIDDLE(HIGH LOW)

POS/SIZE


HSBLC

5.MODE

6.DEFAULT

7.RETURN

ALL DAY(NIGHT )

4.LEVEL


2.DISPLAY

3.BLACK MASK

ON (OFF )

ON(OFF)

RET (SAVE&END )

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET (SAVE&END )

MANUAL WB1.BLUE

2.RED


50(0-100)

50(0-100)

D&N EXT

2.N D(DELAY)


1(0-60)

1(0-60)1.D N(DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET (SAVE&END )

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/W

RET (SAVE&END )

1.LEVEL

2.AREA

3.RETURN

IR SMART

RET (SAVE&END )

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET (SAVE&END )




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.CAM TITLE

2.D-EFFECT

3.MOTION

SPECIAL

6.DEFECT

7.RS485


OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.FREEZE

2.MIRROR

3.NEG.IMAGE

D-EFFECTOFF(ON)

OFF(ON)

RET (SAVE&END )


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.DISPLAY

3.SENSITIVITY

ON (OFF)

MOTION


64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET (SAVE&END )

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DEFECT

RET (SAVE&END )

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LEVEL

3.RETURN

LIVE DPC

RET (SAVE&END )

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

WHITE DPC

RET (SAVE&END )

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

BLACK DPC

RET (SAVE&END )

255(0-255)

4.RETURN

1.CAM ID

2.ID DISPLAY

3.BAUDRATE

RS485

RET (SAVE&END )

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.SHARPNESS

2.MONI TOR

3.LSC ON(OFF)

ADJUST

RET (SAVE&END )

LCD (CTR )

AUTO (OFF)

PAL

4.RETURN

1.L EVEL

2.START AGC

3.END AGC

SHARPNESS

RET (SAVE&END )

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.BLACK LEVEL

1.BLACK LEVEL

2.BLUE GAIN

2.GAMMA

3.RED GAIN

CRT

LCD

RET (SAVE&END )

RET (SAVE&END )

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.BLUE GAIN

4.RED GAIN

USER(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100)

CAM TITLE

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.EXIT

1.ACG

SAVE&END ( )

DISPLAY



POS/SIZE

POSITION RET AGA I NSIZEWB:Press the menu button, move the cursor to WHITE BAL. You can setup the WHITE BAL MODE to ATW, AWB and MANUAL WB. Also can display the submenu to setup the other indicators as needed.

D&N:Press the menu button, move the cursor to DAY&NIGHT. You can setup the DAY&NIGHT MODE to AUTO, COLOR and B/W. Also can display the submenu to setup the other indicators as needed.

MENU

1.LENS

2.EXPOSURE

DC MANUAL( )

3.BACKLIGHT

5. NIGHTDAY

7.SPECIAL

8.ADJUST

4.WHITE BAL

6.NR


OFF BLC ( HSBLC )

ATW AWC SET INDOOR

OUTDOOR MANUAL AWB

(

)

9.EXIT

DC LENS MODE1.MODE

2.IRIS SPEED

INDOOR OUTDOOR ( )


5 (0-15)

OUTDOOR MODE

EXPOSURE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.BRIGHTNESS

5.D-WDR

6.DEFOG

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET (SAVE&END )

RET (SAVE&END )

37(1-100)

1.SHUTTER

1.MIN SHU

(0-15)

SENS-UP



D-WDR1.LEVEL


(0-8)

DEFOG


1.POS/SIZE

2.GRADATION

3.DEFAULT

0(0-22)

POS/SI ZE


BLC


1.LEVEL

2.AREA

3.DEFAULT

MIDDLE(HIGH LOW)

POS/SIZE


HSBLC

5.MODE

6.DEFAULT

7.RETURN

ALL DAY(NIGHT )

4.LEVEL


2.DISPLAY

3.BLACK MASK

ON (OFF )

ON(OFF)

RET (SAVE&END )

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET (SAVE&END )

MANUAL WB1.BLUE

2.RED


50(0-100)

50(0-100)

D&N EXT

2.N D(DELAY)


1(0-60)

1(0-60)1.D N(DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET (SAVE&END )

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/W

RET (SAVE&END )

1.LEVEL

2.AREA

3.RETURN

IR SMART

RET (SAVE&END )

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET (SAVE&END )




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.CAM TITLE

2.D-EFFECT

3.MOTION

SPECIAL

6.DEFECT

7.RS485


OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.FREEZE

2.MIRROR

3.NEG.IMAGE

D-EFFECTOFF(ON)

OFF(ON)

RET (SAVE&END )


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.DISPLAY

3.SENSITIVITY

ON (OFF)

MOTION


64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET (SAVE&END )

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DEFECT

RET (SAVE&END )

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LEVEL

3.RETURN

LIVE DPC

RET (SAVE&END )

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

WHITE DPC

RET (SAVE&END )

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

BLACK DPC

RET (SAVE&END )

255(0-255)

4.RETURN

1.CAM ID

2.ID DISPLAY

3.BAUDRATE

RS485

RET (SAVE&END )

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.SHARPNESS

2.MONI TOR

3.LSC ON(OFF)

ADJUST

RET (SAVE&END )

LCD (CTR )

AUTO (OFF)

PAL

4.RETURN

1.L EVEL

2.START AGC

3.END AGC

SHARPNESS

RET (SAVE&END )

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.BLACK LEVEL

1.BLACK LEVEL

2.BLUE GAIN

2.GAMMA

3.RED GAIN

CRT

LCD

RET (SAVE&END )

RET (SAVE&END )

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.BLUE GAIN

4.RED GAIN

USER(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100)

CAM TITLE

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.EXIT

1.ACG

SAVE&END ( )

DISPLAY



POS/SIZE


MENU

1.LENS

2.EXPOSURE

DC MANUAL( )

3.BACKLIGHT

5. NIGHTDAY

7.SPECIAL

8.ADJUST

4.WHITE BAL

6.NR


OFF BLC ( HSBLC )

ATW AWC SET INDOOR

OUTDOOR MANUAL AWB

(

)

9.EXIT

DC LENS MODE1.MODE

2.IRIS SPEED

INDOOR OUTDOOR ( )


5 (0-15)

OUTDOOR MODE

EXPOSURE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.BRIGHTNESS

5.D-WDR

6.DEFOG

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET (SAVE&END )

RET (SAVE&END )

37(1-100)

1.SHUTTER

1.MIN SHU

(0-15)

SENS-UP



D-WDR1.LEVEL


(0-8)

DEFOG


1.POS/SIZE

2.GRADATION

3.DEFAULT

0(0-22)

POS/SI ZE


BLC


1.LEVEL

2.AREA

3.DEFAULT

MIDDLE(HIGH LOW)

POS/SIZE


HSBLC

5.MODE

6.DEFAULT

7.RETURN

ALL DAY(NIGHT )

4.LEVEL


2.DISPLAY

3.BLACK MASK

ON (OFF )

ON(OFF)

RET (SAVE&END )

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET (SAVE&END )

MANUAL WB1.BLUE

2.RED


50(0-100)

50(0-100)

D&N EXT

2.N D(DELAY)


1(0-60)

1(0-60)1.D N(DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET (SAVE&END )

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/W

RET (SAVE&END )

1.LEVEL

2.AREA

3.RETURN

IR SMART

RET (SAVE&END )

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET (SAVE&END )




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.CAM TITLE

2.D-EFFECT

3.MOTION

SPECIAL

6.DEFECT

7.RS485


OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.FREEZE

2.MIRROR

3.NEG.IMAGE

D-EFFECTOFF(ON)

OFF(ON)

RET (SAVE&END )


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.DISPLAY

3.SENSITIVITY

ON (OFF)

MOTION


64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET (SAVE&END )

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DEFECT

RET (SAVE&END )

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LEVEL

3.RETURN

LIVE DPC

RET (SAVE&END )

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

WHITE DPC

RET (SAVE&END )

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

BLACK DPC

RET (SAVE&END )

255(0-255)

4.RETURN

1.CAM ID

2.ID DISPLAY

3.BAUDRATE

RS485

RET (SAVE&END )

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.SHARPNESS

2.MONI TOR

3.LSC ON(OFF)

ADJUST

RET (SAVE&END )

LCD (CTR )

AUTO (OFF)

PAL

4.RETURN

1.L EVEL

2.START AGC

3.END AGC

SHARPNESS

RET (SAVE&END )

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.BLACK LEVEL

1.BLACK LEVEL

2.BLUE GAIN

2.GAMMA

3.RED GAIN

CRT

LCD

RET (SAVE&END )

RET (SAVE&END )

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.BLUE GAIN

4.RED GAIN

USER(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100)

CAM TITLE

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.EXIT

1.ACG

SAVE&END ( )

DISPLAY



POS/SIZE


BACKLIGHTPress the menu button, move the cursor to Backlight. You can setup the Backlight MODE to OFF, BLC and HSBLC. Also can display the submenu to setup the other indicators as needed.

MENU

1.OBIETTIVO

2.ESPOSIZIONE

DC MANUALE)(

3.RETROILLUM

5.DIURNO/NOTTURNO

7.SPECIAL

8.ADEGUARE

4.BIL. BIANCO

6.N


OFF BLC ( HSBLC )

ATW AWC SET INTERNI

ESTERNI MANUALE AWB

(

)

9.

DC LENS MODE1.MODO

2.IRIS SPEED

INTERNI ESTERNI( )

3.RETURN RET

5 (0-15)

OUTDOOR MODE

ESPOSIZIONE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.LUMINOS

5.D-WDR

6.ANTI CONDENSA

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET

RET (

37(1-100)

1.OTTURATORE

1.MIN SHU

(0-15)

SENS-UP


2. RET

D-WDR1.LIVELLO

2.RETURN RET

(0-8)

ANTI CONDENSA

4.RETURN RET

1.POS/DIMEN

2.GRADAZIONE

3.DEFAULT

0(0-22)

POS/SI ZE


BLC

4.RETURN RET

1.LIVELLO

2.AREA

3.DEFAULT

MEDIO ( )

POS/SIZE


HSBLC

5.MODO

6.DEFAULT

7.RETURN

ALL DAY(NOTTE )

4.LIVELLO


2.VISUAL ID

3.MASCH NERA

ON (OFF )

ON(OFF)

RET

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET

MANUALE WB1.BLU

2.ROSSO

RET3.RETURN

50(0-100)

50(0-100)

D&N EXT

2.N D (DELAY)

RET3.RETURN

1(0-60)

1(0-60)1.D N ( DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/N

RET

1.LIVELLO

2.AREA

3.RETURN

IR SMART

RET

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.TITOLO CAM

2.EFFETTO D

3.MOVIMENTO

SPECIAL

6.DIFETTO

7.RS485

8.RETURN RET

OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.BLOCCA

2.INVER

3.IMMAGINE NEG

EFFETTO DOFF(ON)

OFF(ON)

RET


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.VISUAL ID

3.SENSIBILITA’

ON (OFF)

MOVIMENTO

8.RETURN RET

64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DIFET TO

RET

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LIVELLO

3.RETURN

LIVE DPC

RET

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

WHITE DPC

RET

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

BLACK DPC

RET

255(0-255)

4.RETURN

1.ID CAM

2.VISUAL ID

3.BAUDRATE

RS485

RET

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.NITIDEZZA

2.MONI TOR

3.LSC ON(OFF)

ADEGUARE

RET

LCD (C TR

AUTO (OFF)

PAL

4.RETURN

1.LIVELLO

2.START AGC

3.END AGC

NITIDEZZA

RET

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.LIV NERO

1.LIV NERO

2.GUAD BLU

2.GAMMA

3.GUAD ROSSO

CRT

LCD

RET

RET

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.GUAD BLU

4.GUAD ROSSO

UTENTE(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.USCITA

1.ACG

FINE ( )

DISPLAY



POS/SIZE


FINE )

FINE ( )

.RETURN

( FINE )

( FINE )

( FINE )

( FINE )

ALTO BASSO

(FINE )

( FINE )

(FINE )

(FINE )

(FINE )

(FINE )

(FINE )

FINE ( )

FINE ( )

TITOLO CAM

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

(FINE )

(FINE )

)

(FINE )

(FINE )

(FINE )

)

FINE ( )

MENU

1.OBIETTIVO

2.ESPOSIZIONE

DC MANUALE)(

3.RETROILLUM

5.DIURNO/NOTTURNO

7.SPECIAL

8.ADEGUARE

4.BIL. BIANCO

6.N


OFF BLC ( HSBLC )

ATW AWC SET INTERNI

ESTERNI MANUALE AWB

(

)

9.

DC LENS MODE1.MODO

2.IRIS SPEED

INTERNI ESTERNI( )

3.RETURN RET

5 (0-15)

OUTDOOR MODE

ESPOSIZIONE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.LUMINOS

5.D-WDR

6.ANTI CONDENSA

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET

RET (

37(1-100)

1.OTTURATORE

1.MIN SHU

(0-15)

SENS-UP


2. RET

D-WDR1.LIVELLO

2.RETURN RET

(0-8)

ANTI CONDENSA

4.RETURN RET

1.POS/DIMEN

2.GRADAZIONE

3.DEFAULT

0(0-22)

POS/SI ZE


BLC

4.RETURN RET

1.LIVELLO

2.AREA

3.DEFAULT

MEDIO ( )

POS/SIZE


HSBLC

5.MODO

6.DEFAULT

7.RETURN

ALL DAY(NOTTE )

4.LIVELLO


2.VISUAL ID

3.MASCH NERA

ON (OFF )

ON(OFF)

RET

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET

MANUALE WB1.BLU

2.ROSSO

RET3.RETURN

50(0-100)

50(0-100)

D&N EXT

2.N D (DELAY)

RET3.RETURN

1(0-60)

1(0-60)1.D N ( DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/N

RET

1.LIVELLO

2.AREA

3.RETURN

IR SMART

RET

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.TITOLO CAM

2.EFFETTO D

3.MOVIMENTO

SPECIAL

6.DIFETTO

7.RS485

8.RETURN RET

OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.BLOCCA

2.INVER

3.IMMAGINE NEG

EFFETTO DOFF(ON)

OFF(ON)

RET


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.VISUAL ID

3.SENSIBILITA’

ON (OFF)

MOVIMENTO

8.RETURN RET

64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DIFET TO

RET

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LIVELLO

3.RETURN

LIVE DPC

RET

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

WHITE DPC

RET

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

BLACK DPC

RET

255(0-255)

4.RETURN

1.ID CAM

2.VISUAL ID

3.BAUDRATE

RS485

RET

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.NITIDEZZA

2.MONI TOR

3.LSC ON(OFF)

ADEGUARE

RET

LCD (C TR

AUTO (OFF)

PAL

4.RETURN

1.LIVELLO

2.START AGC

3.END AGC

NITIDEZZA

RET

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.LIV NERO

1.LIV NERO

2.GUAD BLU

2.GAMMA

3.GUAD ROSSO

CRT

LCD

RET

RET

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.GUAD BLU

4.GUAD ROSSO

UTENTE(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.USCITA

1.ACG

FINE ( )

DISPLAY



POS/SIZE


FINE )

FINE ( )

.RETURN

( FINE )

( FINE )

( FINE )

( FINE )

ALTO BASSO

(FINE )

( FINE )

(FINE )

(FINE )

(FINE )

(FINE )

(FINE )

FINE ( )

FINE ( )

TITOLO CAM

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

(FINE )

(FINE )

)

(FINE )

(FINE )

(FINE )

)

FINE ( )

MENU

1.OBIETTIVO

2.ESPOSIZIONE

DC MANUALE)(

3.RETROILLUM

5.DIURNO/NOTTURNO

7.SPECIAL

8.ADEGUARE

4.BIL. BIANCO

6.N


OFF BLC ( HSBLC )

ATW AWC SET INTERNI

ESTERNI MANUALE AWB

(

)

9.

DC LENS MODE1.MODO

2.IRIS SPEED

INTERNI ESTERNI( )

3.RETURN RET

5 (0-15)

OUTDOOR MODE

ESPOSIZIONE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.LUMINOS

5.D-WDR

6.ANTI CONDENSA

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET

RET (

37(1-100)

1.OTTURATORE

1.MIN SHU

(0-15)

SENS-UP


2. RET

D-WDR1.LIVELLO

2.RETURN RET

(0-8)

ANTI CONDENSA

4.RETURN RET

1.POS/DIMEN

2.GRADAZIONE

3.DEFAULT

0(0-22)

POS/SI ZE


BLC

4.RETURN RET

1.LIVELLO

2.AREA

3.DEFAULT

MEDIO ( )

POS/SIZE


HSBLC

5.MODO

6.DEFAULT

7.RETURN

ALL DAY(NOTTE )

4.LIVELLO


2.VISUAL ID

3.MASCH NERA

ON (OFF )

ON(OFF)

RET

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET

MANUALE WB1.BLU

2.ROSSO

RET3.RETURN

50(0-100)

50(0-100)

D&N EXT

2.N D (DELAY)

RET3.RETURN

1(0-60)

1(0-60)1.D N ( DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/N

RET

1.LIVELLO

2.AREA

3.RETURN

IR SMART

RET

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.TITOLO CAM

2.EFFETTO D

3.MOVIMENTO

SPECIAL

6.DIFETTO

7.RS485

8.RETURN RET

OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.BLOCCA

2.INVER

3.IMMAGINE NEG

EFFETTO DOFF(ON)

OFF(ON)

RET


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.VISUAL ID

3.SENSIBILITA’

ON (OFF)

MOVIMENTO

8.RETURN RET

64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DIFET TO

RET

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LIVELLO

3.RETURN

LIVE DPC

RET

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

WHITE DPC

RET

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

BLACK DPC

RET

255(0-255)

4.RETURN

1.ID CAM

2.VISUAL ID

3.BAUDRATE

RS485

RET

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.NITIDEZZA

2.MONI TOR

3.LSC ON(OFF)

ADEGUARE

RET

LCD (C TR

AUTO (OFF)

PAL

4.RETURN

1.LIVELLO

2.START AGC

3.END AGC

NITIDEZZA

RET

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.LIV NERO

1.LIV NERO

2.GUAD BLU

2.GAMMA

3.GUAD ROSSO

CRT

LCD

RET

RET

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.GUAD BLU

4.GUAD ROSSO

UTENTE(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.USCITA

1.ACG

FINE ( )

DISPLAY



POS/SIZE


FINE )

FINE ( )

.RETURN

( FINE )

( FINE )

( FINE )

( FINE )

ALTO BASSO

(FINE )

( FINE )

(FINE )

(FINE )

(FINE )

(FINE )

(FINE )

FINE ( )

FINE ( )

TITOLO CAM

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

(FINE )

(FINE )

)

(FINE )

(FINE )

(FINE )

)

FINE ( )

6 ENI

NR:Spostare il cursore su NR e premere il pulsante menu per visualizzare il sottomenu. È inoltre possibile impostare la modalità su 2DNR o 3DNR.

SPECIAL (Funzioni speciali)Spostare il cursore su SPECIAL e premere il pulsante di menu per visualiz-zare il sottomenu. È possibile impostare TITOLO CAM, D-EFFECT (Effetti digitali), MOVIMENTO, PRIVACY, LINGUA, DIFETTO e RS485.

NR:Move the cursor to NR and press the menu button to display submenu.You can setup the mode to 2DNR or 3DNR.

MENU

1.LENS

2.EXPOSURE

DC MANUAL( )

3.BACKLIGHT

5. NIGHTDAY

7.SPECIAL

8.ADJUST

4.WHITE BAL

6.NR


OFF BLC ( HSBLC )

ATW AWC SET INDOOR

OUTDOOR MANUAL AWB

(

)

9.EXIT

DC LENS MODE1.MODE

2.IRIS SPEED

INDOOR OUTDOOR ( )


5 (0-15)

OUTDOOR MODE

EXPOSURE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.BRIGHTNESS

5.D-WDR

6.DEFOG

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET (SAVE&END )

RET (SAVE&END )

37(1-100)

1.SHUTTER

1.MIN SHU

(0-15)

SENS-UP



D-WDR1.LEVEL


(0-8)

DEFOG


1.POS/SIZE

2.GRADATION

3.DEFAULT

0(0-22)

POS/SI ZE


BLC


1.LEVEL

2.AREA

3.DEFAULT

MIDDLE(HIGH LOW)

POS/SIZE


HSBLC

5.MODE

6.DEFAULT

7.RETURN

ALL DAY(NIGHT )

4.LEVEL


2.DISPLAY

3.BLACK MASK

ON (OFF )

ON(OFF)

RET (SAVE&END )

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET (SAVE&END )

MANUAL WB1.BLUE

2.RED


50(0-100)

50(0-100)

D&N EXT

2.N D(DELAY)


1(0-60)

1(0-60)1.D N(DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET (SAVE&END )

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/W

RET (SAVE&END )

1.LEVEL

2.AREA

3.RETURN

IR SMART

RET (SAVE&END )

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET (SAVE&END )




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.CAM TITLE

2.D-EFFECT

3.MOTION

SPECIAL

6.DEFECT

7.RS485


OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.FREEZE

2.MIRROR

3.NEG.IMAGE

D-EFFECTOFF(ON)

OFF(ON)

RET (SAVE&END )


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.DISPLAY

3.SENSITIVITY

ON (OFF)

MOTION


64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET (SAVE&END )

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DEFECT

RET (SAVE&END )

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LEVEL

3.RETURN

LIVE DPC

RET (SAVE&END )

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

WHITE DPC

RET (SAVE&END )

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

BLACK DPC

RET (SAVE&END )

255(0-255)

4.RETURN

1.CAM ID

2.ID DISPLAY

3.BAUDRATE

RS485

RET (SAVE&END )

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.SHARPNESS

2.MONI TOR

3.LSC ON(OFF)

ADJUST

RET (SAVE&END )

LCD (CTR )

AUTO (OFF)

PAL

4.RETURN

1.L EVEL

2.START AGC

3.END AGC

SHARPNESS

RET (SAVE&END )

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.BLACK LEVEL

1.BLACK LEVEL

2.BLUE GAIN

2.GAMMA

3.RED GAIN

CRT

LCD

RET (SAVE&END )

RET (SAVE&END )

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.BLUE GAIN

4.RED GAIN

USER(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100)

CAM TITLE

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.EXIT

1.ACG

SAVE&END ( )

DISPLAY



POS/SIZE


SPECIALMove the cursor to SPECIAL and press the menu button to display sub-menu. You can setup the CAM TITLE, D-EFFECT, MOTION,PRIVACY, LANGUAGE, DEFOG and RS485.

MENU

1.LENS

2.EXPOSURE

DC MANUAL( )

3.BACKLIGHT

5. NIGHTDAY

7.SPECIAL

8.ADJUST

4.WHITE BAL

6.NR


OFF BLC ( HSBLC )

ATW AWC SET INDOOR

OUTDOOR MANUAL AWB

(

)

9.EXIT

DC LENS MODE1.MODE

2.IRIS SPEED

INDOOR OUTDOOR ( )


5 (0-15)

OUTDOOR MODE

EXPOSURE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.BRIGHTNESS

5.D-WDR

6.DEFOG

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET (SAVE&END )

RET (SAVE&END )

37(1-100)

1.SHUTTER

1.MIN SHU

(0-15)

SENS-UP



D-WDR1.LEVEL


(0-8)

DEFOG


1.POS/SIZE

2.GRADATION

3.DEFAULT

0(0-22)

POS/SI ZE


BLC


1.LEVEL

2.AREA

3.DEFAULT

MIDDLE(HIGH LOW)

POS/SIZE


HSBLC

5.MODE

6.DEFAULT

7.RETURN

ALL DAY(NIGHT )

4.LEVEL


2.DISPLAY

3.BLACK MASK

ON (OFF )

ON(OFF)

RET (SAVE&END )

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET (SAVE&END )

MANUAL WB1.BLUE

2.RED


50(0-100)

50(0-100)

D&N EXT

2.N D(DELAY)


1(0-60)

1(0-60)1.D N(DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET (SAVE&END )

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/W

RET (SAVE&END )

1.LEVEL

2.AREA

3.RETURN

IR SMART

RET (SAVE&END )

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET (SAVE&END )




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.CAM TITLE

2.D-EFFECT

3.MOTION

SPECIAL

6.DEFECT

7.RS485


OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.FREEZE

2.MIRROR

3.NEG.IMAGE

D-EFFECTOFF(ON)

OFF(ON)

RET (SAVE&END )


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.DISPLAY

3.SENSITIVITY

ON (OFF)

MOTION


64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET (SAVE&END )

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DEFECT

RET (SAVE&END )

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LEVEL

3.RETURN

LIVE DPC

RET (SAVE&END )

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

WHITE DPC

RET (SAVE&END )

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

BLACK DPC

RET (SAVE&END )

255(0-255)

4.RETURN

1.CAM ID

2.ID DISPLAY

3.BAUDRATE

RS485

RET (SAVE&END )

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.SHARPNESS

2.MONI TOR

3.LSC ON(OFF)

ADJUST

RET (SAVE&END )

LCD (CTR )

AUTO (OFF)

PAL

4.RETURN

1.L EVEL

2.START AGC

3.END AGC

SHARPNESS

RET (SAVE&END )

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.BLACK LEVEL

1.BLACK LEVEL

2.BLUE GAIN

2.GAMMA

3.RED GAIN

CRT

LCD

RET (SAVE&END )

RET (SAVE&END )

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.BLUE GAIN

4.RED GAIN

USER(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100)

CAM TITLE

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.EXIT

1.ACG

SAVE&END ( )

DISPLAY



POS/SIZE


MENU

1.OBIETTIVO

2.ESPOSIZIONE

DC MANUALE)(

3.RETROILLUM

5.DIURNO/NOTTURNO

7.SPECIAL

8.ADEGUARE

4.BIL. BIANCO

6.N


OFF BLC ( HSBLC )

ATW AWC SET INTERNI

ESTERNI MANUALE AWB

(

)

9.

DC LENS MODE1.MODO

2.IRIS SPEED

INTERNI ESTERNI( )

3.RETURN RET

5 (0-15)

OUTDOOR MODE

ESPOSIZIONE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.LUMINOS

5.D-WDR

6.ANTI CONDENSA

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET

RET (

37(1-100)

1.OTTURATORE

1.MIN SHU

(0-15)

SENS-UP


2. RET

D-WDR1.LIVELLO

2.RETURN RET

(0-8)

ANTI CONDENSA

4.RETURN RET

1.POS/DIMEN

2.GRADAZIONE

3.DEFAULT

0(0-22)

POS/SI ZE


BLC

4.RETURN RET

1.LIVELLO

2.AREA

3.DEFAULT

MEDIO ( )

POS/SIZE


HSBLC

5.MODO

6.DEFAULT

7.RETURN

ALL DAY(NOTTE )

4.LIVELLO


2.VISUAL ID

3.MASCH NERA

ON (OFF )

ON(OFF)

RET

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET

MANUALE WB1.BLU

2.ROSSO

RET3.RETURN

50(0-100)

50(0-100)

D&N EXT

2.N D (DELAY)

RET3.RETURN

1(0-60)

1(0-60)1.D N ( DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/N

RET

1.LIVELLO

2.AREA

3.RETURN

IR SMART

RET

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.TITOLO CAM

2.EFFETTO D

3.MOVIMENTO

SPECIAL

6.DIFETTO

7.RS485

8.RETURN RET

OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.BLOCCA

2.INVER

3.IMMAGINE NEG

EFFETTO DOFF(ON)

OFF(ON)

RET


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.VISUAL ID

3.SENSIBILITA’

ON (OFF)

MOVIMENTO

8.RETURN RET

64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DIFET TO

RET

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LIVELLO

3.RETURN

LIVE DPC

RET

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

WHITE DPC

RET

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

BLACK DPC

RET

255(0-255)

4.RETURN

1.ID CAM

2.VISUAL ID

3.BAUDRATE

RS485

RET

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.NITIDEZZA

2.MONI TOR

3.LSC ON(OFF)

ADEGUARE

RET

LCD (C TR

AUTO (OFF)

PAL

4.RETURN

1.LIVELLO

2.START AGC

3.END AGC

NITIDEZZA

RET

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.LIV NERO

1.LIV NERO

2.GUAD BLU

2.GAMMA

3.GUAD ROSSO

CRT

LCD

RET

RET

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.GUAD BLU

4.GUAD ROSSO

UTENTE(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.USCITA

1.ACG

FINE ( )

DISPLAY



POS/SIZE


FINE )

FINE ( )

.RETURN

( FINE )

( FINE )

( FINE )

( FINE )

ALTO BASSO

(FINE )

( FINE )

(FINE )

(FINE )

(FINE )

(FINE )

(FINE )

FINE ( )

FINE ( )

TITOLO CAM

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

(FINE )

(FINE )

)

(FINE )

(FINE )

(FINE )

)

FINE ( )

MENU

1.OBIETTIVO

2.ESPOSIZIONE

DC MANUALE)(

3.RETROILLUM

5.DIURNO/NOTTURNO

7.SPECIAL

8.ADEGUARE

4.BIL. BIANCO

6.N


OFF BLC ( HSBLC )

ATW AWC SET INTERNI

ESTERNI MANUALE AWB

(

)

9.

DC LENS MODE1.MODO

2.IRIS SPEED

INTERNI ESTERNI( )

3.RETURN RET

5 (0-15)

OUTDOOR MODE

ESPOSIZIONE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.LUMINOS

5.D-WDR

6.ANTI CONDENSA

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET

RET (

37(1-100)

1.OTTURATORE

1.MIN SHU

(0-15)

SENS-UP


2. RET

D-WDR1.LIVELLO

2.RETURN RET

(0-8)

ANTI CONDENSA

4.RETURN RET

1.POS/DIMEN

2.GRADAZIONE

3.DEFAULT

0(0-22)

POS/SI ZE


BLC

4.RETURN RET

1.LIVELLO

2.AREA

3.DEFAULT

MEDIO ( )

POS/SIZE


HSBLC

5.MODO

6.DEFAULT

7.RETURN

ALL DAY(NOTTE )

4.LIVELLO


2.VISUAL ID

3.MASCH NERA

ON (OFF )

ON(OFF)

RET

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET

MANUALE WB1.BLU

2.ROSSO

RET3.RETURN

50(0-100)

50(0-100)

D&N EXT

2.N D (DELAY)

RET3.RETURN

1(0-60)

1(0-60)1.D N ( DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/N

RET

1.LIVELLO

2.AREA

3.RETURN

IR SMART

RET

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.TITOLO CAM

2.EFFETTO D

3.MOVIMENTO

SPECIAL

6.DIFETTO

7.RS485

8.RETURN RET

OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.BLOCCA

2.INVER

3.IMMAGINE NEG

EFFETTO DOFF(ON)

OFF(ON)

RET


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.VISUAL ID

3.SENSIBILITA’

ON (OFF)

MOVIMENTO

8.RETURN RET

64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DIFET TO

RET

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LIVELLO

3.RETURN

LIVE DPC

RET

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

WHITE DPC

RET

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

BLACK DPC

RET

255(0-255)

4.RETURN

1.ID CAM

2.VISUAL ID

3.BAUDRATE

RS485

RET

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.NITIDEZZA

2.MONI TOR

3.LSC ON(OFF)

ADEGUARE

RET

LCD (C TR

AUTO (OFF)

PAL

4.RETURN

1.LIVELLO

2.START AGC

3.END AGC

NITIDEZZA

RET

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.LIV NERO

1.LIV NERO

2.GUAD BLU

2.GAMMA

3.GUAD ROSSO

CRT

LCD

RET

RET

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.GUAD BLU

4.GUAD ROSSO

UTENTE(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.USCITA

1.ACG

FINE ( )

DISPLAY



POS/SIZE


FINE )

FINE ( )

.RETURN

( FINE )

( FINE )

( FINE )

( FINE )

ALTO BASSO

(FINE )

( FINE )

(FINE )

(FINE )

(FINE )

(FINE )

(FINE )

FINE ( )

FINE ( )

TITOLO CAM

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

(FINE )

(FINE )

)

(FINE )

(FINE )

(FINE )

)

FINE ( )

7ENI

MENU

1.LENS

2.EXPOSURE

DC MANUAL( )

3.BACKLIGHT

5. NIGHTDAY

7.SPECIAL

8.ADJUST

4.WHITE BAL

6.NR


OFF BLC ( HSBLC )

ATW AWC SET INDOOR

OUTDOOR MANUAL AWB

(

)

9.EXIT

DC LENS MODE1.MODE

2.IRIS SPEED

INDOOR OUTDOOR ( )


5 (0-15)

OUTDOOR MODE

EXPOSURE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.BRIGHTNESS

5.D-WDR

6.DEFOG

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET (SAVE&END )

RET (SAVE&END )

37(1-100)

1.SHUTTER

1.MIN SHU

(0-15)

SENS-UP



D-WDR1.LEVEL


(0-8)

DEFOG


1.POS/SIZE

2.GRADATION

3.DEFAULT

0(0-22)

POS/SI ZE


BLC


1.LEVEL

2.AREA

3.DEFAULT

MIDDLE(HIGH LOW)

POS/SIZE


HSBLC

5.MODE

6.DEFAULT

7.RETURN

ALL DAY(NIGHT )

4.LEVEL


2.DISPLAY

3.BLACK MASK

ON (OFF )

ON(OFF)

RET (SAVE&END )

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET (SAVE&END )

MANUAL WB1.BLUE

2.RED


50(0-100)

50(0-100)

D&N EXT

2.N D(DELAY)


1(0-60)

1(0-60)1.D N(DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET (SAVE&END )

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/W

RET (SAVE&END )

1.LEVEL

2.AREA

3.RETURN

IR SMART

RET (SAVE&END )

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET (SAVE&END )




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.CAM TITLE

2.D-EFFECT

3.MOTION

SPECIAL

6.DEFECT

7.RS485


OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.FREEZE

2.MIRROR

3.NEG.IMAGE

D-EFFECTOFF(ON)

OFF(ON)

RET (SAVE&END )


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.DISPLAY

3.SENSITIVITY

ON (OFF)

MOTION


64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET (SAVE&END )

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DEFECT

RET (SAVE&END )

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LEVEL

3.RETURN

LIVE DPC

RET (SAVE&END )

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

WHITE DPC

RET (SAVE&END )

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

BLACK DPC

RET (SAVE&END )

255(0-255)

4.RETURN

1.CAM ID

2.ID DISPLAY

3.BAUDRATE

RS485

RET (SAVE&END )

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.SHARPNESS

2.MONI TOR

3.LSC ON(OFF)

ADJUST

RET (SAVE&END )

LCD (CTR )

AUTO (OFF)

PAL

4.RETURN

1.L EVEL

2.START AGC

3.END AGC

SHARPNESS

RET (SAVE&END )

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.BLACK LEVEL

1.BLACK LEVEL

2.BLUE GAIN

2.GAMMA

3.RED GAIN

CRT

LCD

RET (SAVE&END )

RET (SAVE&END )

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.BLUE GAIN

4.RED GAIN

USER(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100)

CAM TITLE

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.EXIT

1.ACG

SAVE&END ( )

DISPLAY



POS/SIZE


ADJUSTPress the menu button to display submenu, can setup the SHARPNESS, MONITOR, LSC, VIDEO OUT MODE

MENU

1.LENS

2.EXPOSURE

DC MANUAL( )

3.BACKLIGHT

5. NIGHTDAY

7.SPECIAL

8.ADJUST

4.WHITE BAL

6.NR


OFF BLC ( HSBLC )

ATW AWC SET INDOOR

OUTDOOR MANUAL AWB

(

)

9.EXIT

DC LENS MODE1.MODE

2.IRIS SPEED

INDOOR OUTDOOR ( )


5 (0-15)

OUTDOOR MODE

EXPOSURE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.BRIGHTNESS

5.D-WDR

6.DEFOG

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET (SAVE&END )

RET (SAVE&END )

37(1-100)

1.SHUTTER

1.MIN SHU

(0-15)

SENS-UP



D-WDR1.LEVEL


(0-8)

DEFOG


1.POS/SIZE

2.GRADATION

3.DEFAULT

0(0-22)

POS/SI ZE


BLC


1.LEVEL

2.AREA

3.DEFAULT

MIDDLE(HIGH LOW)

POS/SIZE


HSBLC

5.MODE

6.DEFAULT

7.RETURN

ALL DAY(NIGHT )

4.LEVEL


2.DISPLAY

3.BLACK MASK

ON (OFF )

ON(OFF)

RET (SAVE&END )

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET (SAVE&END )

MANUAL WB1.BLUE

2.RED


50(0-100)

50(0-100)

D&N EXT

2.N D(DELAY)


1(0-60)

1(0-60)1.D N(DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET (SAVE&END )

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/W

RET (SAVE&END )

1.LEVEL

2.AREA

3.RETURN

IR SMART

RET (SAVE&END )

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET (SAVE&END )




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.CAM TITLE

2.D-EFFECT

3.MOTION

SPECIAL

6.DEFECT

7.RS485


OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.FREEZE

2.MIRROR

3.NEG.IMAGE

D-EFFECTOFF(ON)

OFF(ON)

RET (SAVE&END )


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.DISPLAY

3.SENSITIVITY

ON (OFF)

MOTION


64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET (SAVE&END )

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DEFECT

RET (SAVE&END )

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LEVEL

3.RETURN

LIVE DPC

RET (SAVE&END )

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

WHITE DPC

RET (SAVE&END )

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LEVEL

1.POS/SIZE

2.START

3.DPC VIEW ON(OFF)

BLACK DPC

RET (SAVE&END )

255(0-255)

4.RETURN

1.CAM ID

2.ID DISPLAY

3.BAUDRATE

RS485

RET (SAVE&END )

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.SHARPNESS

2.MONI TOR

3.LSC ON(OFF)

ADJUST

RET (SAVE&END )

LCD (CTR )

AUTO (OFF)

PAL

4.RETURN

1.L EVEL

2.START AGC

3.END AGC

SHARPNESS

RET (SAVE&END )

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.BLACK LEVEL

1.BLACK LEVEL

2.BLUE GAIN

2.GAMMA

3.RED GAIN

CRT

LCD

RET (SAVE&END )

RET (SAVE&END )

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.BLUE GAIN

4.RED GAIN

USER(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100)

CAM TITLE

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.EXIT

1.ACG

SAVE&END ( )

DISPLAY



POS/SIZE


ADEGUAREPremere il pulsante menu per visualizzare è possibile impostare NITI-DEZZA, MONITOR, LSC, VIDEO OUT.

MENU

1.OBIETTIVO

2.ESPOSIZIONE

DC MANUALE)(

3.RETROILLUM

5.DIURNO/NOTTURNO

7.SPECIAL

8.ADEGUARE

4.BIL. BIANCO

6.N


OFF BLC ( HSBLC )

ATW AWC SET INTERNI

ESTERNI MANUALE AWB

(

)

9.

DC LENS MODE1.MODO

2.IRIS SPEED

INTERNI ESTERNI( )

3.RETURN RET

5 (0-15)

OUTDOOR MODE

ESPOSIZIONE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.LUMINOS

5.D-WDR

6.ANTI CONDENSA

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET

RET (

37(1-100)

1.OTTURATORE

1.MIN SHU

(0-15)

SENS-UP


2. RET

D-WDR1.LIVELLO

2.RETURN RET

(0-8)

ANTI CONDENSA

4.RETURN RET

1.POS/DIMEN

2.GRADAZIONE

3.DEFAULT

0(0-22)

POS/SI ZE


BLC

4.RETURN RET

1.LIVELLO

2.AREA

3.DEFAULT

MEDIO ( )

POS/SIZE


HSBLC

5.MODO

6.DEFAULT

7.RETURN

ALL DAY(NOTTE )

4.LIVELLO


2.VISUAL ID

3.MASCH NERA

ON (OFF )

ON(OFF)

RET

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET

MANUALE WB1.BLU

2.ROSSO

RET3.RETURN

50(0-100)

50(0-100)

D&N EXT

2.N D (DELAY)

RET3.RETURN

1(0-60)

1(0-60)1.D N ( DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/N

RET

1.LIVELLO

2.AREA

3.RETURN

IR SMART

RET

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.TITOLO CAM

2.EFFETTO D

3.MOVIMENTO

SPECIAL

6.DIFETTO

7.RS485

8.RETURN RET

OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.BLOCCA

2.INVER

3.IMMAGINE NEG

EFFETTO DOFF(ON)

OFF(ON)

RET


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.VISUAL ID

3.SENSIBILITA’

ON (OFF)

MOVIMENTO

8.RETURN RET

64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DIFET TO

RET

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LIVELLO

3.RETURN

LIVE DPC

RET

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

WHITE DPC

RET

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

BLACK DPC

RET

255(0-255)

4.RETURN

1.ID CAM

2.VISUAL ID

3.BAUDRATE

RS485

RET

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.NITIDEZZA

2.MONI TOR

3.LSC ON(OFF)

ADEGUARE

RET

LCD (C TR

AUTO (OFF)

PAL

4.RETURN

1.LIVELLO

2.START AGC

3.END AGC

NITIDEZZA

RET

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.LIV NERO

1.LIV NERO

2.GUAD BLU

2.GAMMA

3.GUAD ROSSO

CRT

LCD

RET

RET

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.GUAD BLU

4.GUAD ROSSO

UTENTE(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.USCITA

1.ACG

FINE ( )

DISPLAY



POS/SIZE


FINE )

FINE ( )

.RETURN

( FINE )

( FINE )

( FINE )

( FINE )

ALTO BASSO

(FINE )

( FINE )

(FINE )

(FINE )

(FINE )

(FINE )

(FINE )

FINE ( )

FINE ( )

TITOLO CAM

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

(FINE )

(FINE )

)

(FINE )

(FINE )

(FINE )

)

FINE ( )

MENU

1.OBIETTIVO

2.ESPOSIZIONE

DC MANUALE)(

3.RETROILLUM

5.DIURNO/NOTTURNO

7.SPECIAL

8.ADEGUARE

4.BIL. BIANCO

6.N


OFF BLC ( HSBLC )

ATW AWC SET INTERNI

ESTERNI MANUALE AWB

(

)

9.

DC LENS MODE1.MODO

2.IRIS SPEED

INTERNI ESTERNI( )

3.RETURN RET

5 (0-15)

OUTDOOR MODE

ESPOSIZIONE

1/50(FLK 1/200 1/400 1/1000 1/2000

1/5000 1/10000 1/50000)

1/25

2.AGC

2.MAX SHU

3.SENS-UP

4.LUMINOS

5.D-WDR

6.ANTI CONDENSA

7.RETURN

3.RETURN

AUTO (OFF)

OFF(ON AUTO )

OFF(AUTO )

RET

RET (

37(1-100)

1.OTTURATORE

1.MIN SHU

(0-15)

SENS-UP


2. RET

D-WDR1.LIVELLO

2.RETURN RET

(0-8)

ANTI CONDENSA

4.RETURN RET

1.POS/DIMEN

2.GRADAZIONE

3.DEFAULT

0(0-22)

POS/SI ZE


BLC

4.RETURN RET

1.LIVELLO

2.AREA

3.DEFAULT

MEDIO ( )

POS/SIZE


HSBLC

5.MODO

6.DEFAULT

7.RETURN

ALL DAY(NOTTE )

4.LIVELLO


2.VISUAL ID

3.MASCH NERA

ON (OFF )

ON(OFF)

RET

20(0-100)

POS/SIZE


NIGHT MODE

2.RETURN

48(0-255)

RET

MANUALE WB1.BLU

2.ROSSO

RET3.RETURN

50(0-100)

50(0-100)

D&N EXT

2.N D (DELAY)

RET3.RETURN

1(0-60)

1(0-60)1.D N ( DELAY)

5.RETURN

D&N AUTO

1.D N(AGC)

2.D N(DELAY)

3.N D(AGC)

4.N D(DELAY)

RET

48(0-255)

3(0-60)

48(0-255)

3(0-60)

4.RETURM

OFF(ON)1.BURST

2.IR SMART

3.IR PWM

OFF(ON )

OFF( 1 (1-100))

B/N

RET

1.LIVELLO

2.AREA

3.RETURN

IR SMART

RET

3(0-15)

AREA


1.2DNR

2.3DNR

3.RETURN

NR

RET




SPA POL RUS POR

NED TUR ENG

4.PRIVACY

1.TITOLO CAM

2.EFFETTO D

3.MOVIMENTO

SPECIAL

6.DIFETTO

7.RS485

8.RETURN RET

OFF(ON )

OFF(ON )

OFF(ON )

4.RETURN

1.BLOCCA

2.INVER

3.IMMAGINE NEG

EFFETTO DOFF(ON)

OFF(ON)

RET


6.ALARM

7.DEFAULT

5.TRANS 1.00(0.75 0.50 0.25)



2.VISUAL ID

3.SENSIBILITA’

ON (OFF)

MOVIMENTO

8.RETURN RET

64(0-100)

6.RETURN

5.TIME



2.OSD VIEW

3. ALARM OUT

ON(OFF)

ALARM

5(0-15)

ON(OFF)

RET

4.RETURN

1.LIVE DPC

2.WHITE DPC

3.BLACK DPC

DIFET TO

RET

OFF(ON )

OFF(ON )

OFF(ON )

1.AGC LEVEL

2.LIVELLO

3.RETURN

LIVE DPC

RET

64(0-255)

100(0-100)

6.SENS-UP

7.RETURN

5.AGC

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

WHITE DPC

RET

64(0-100)

64(0-100)

X4(X6 X8 X10 X15 X20 X25 X30 X2)

POS/SIZE

5.RETURN

4.LIVELLO

1.POS/DIMEN

2.INIZIO

3.DPC VIEW ON(OFF)

BLACK DPC

RET

255(0-255)

4.RETURN

1.ID CAM

2.VISUAL ID

3.BAUDRATE

RS485

RET

ON(OFF )

100(0-100)

38400(2400 4800 9600 19200)

5.RETURN

4.VIDEO OUT

1.NITIDEZZA

2.MONI TOR

3.LSC ON(OFF)

ADEGUARE

RET

LCD (C TR

AUTO (OFF)

PAL

4.RETURN

1.LIVELLO

2.START AGC

3.END AGC

NITIDEZZA

RET

5(0-10)

32(0-255)

130(0-255)

4.RETURN

5.RETURN

1.LIV NERO

1.LIV NERO

2.GUAD BLU

2.GAMMA

3.GUAD ROSSO

CRT

LCD

RET

RET

6(0-60)

6(0-60)

50(0-100)

50(0-100)

3.GUAD BLU

4.GUAD ROSSO

UTENTE(0.45 0.50 0.55 0.60 0.65 0.70

0.75 0.80 0.85 0.90 0.95 1.00)

53(0-100)

53(0-100

0 1 2 3 4 5 6 7 8 9

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ►

( )- - - / = & : ~ ,

CLR POS END

--------------------------

START

START

CLOSE THE IRIS

CLOSE THE IRIS

PRESS ENTER

PRESS ENTER

THEN

THEN

6.NR

9.USCITA

1.ACG

FINE ( )

DISPLAY



POS/SIZE


FINE )

FINE ( )

.RETURN

( FINE )

( FINE )

( FINE )

( FINE )

ALTO BASSO

(FINE )

( FINE )

(FINE )

(FINE )

(FINE )

(FINE )

(FINE )

FINE ( )

FINE ( )

TITOLO CAM

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

FINE ( )

(FINE )

(FINE )

)

(FINE )

(FINE )

(FINE )

)

FINE ( )

Vimar SpA: Viale Vicenza, 1436063 Marostica VI - ItalyTel. +39 0424 488 600 - Fax (Italia) 0424 488 188Fax (Export) 0424 488 709www.vimar.com

49400836A0 01 15 07VIMAR - Marostica - Italy

AVVERTENZE PER L’INSTALLATORE- Leggere attentamente le av ver ten ze contenute nel pre sen te do cu men to in

quanto for ni sco no importanti indicazioni ri guar dan ti la sicurezza di in stal la-zio ne, d’uso e di ma nu ten zio ne.

- Dopo aver tolto l’imballaggio assicurarsi dell’integrità del l’ap pa rec chio. Gli ele men ti dell’imballaggio (sacchetti di pla sti ca, po li sti ro lo espanso, ecc.) non devono essere lasciati alla portata dei bambini in quanto potenziali fonti di pericolo. L’esecuzione dell’impianto deve essere ri spon den te alle nor me CEI vigenti.

- È necessario prevedere a monte dell’alimentazione un appropriato in ter rut to re di tipo bipolare facilmente accessibile con separazione tra i contatti di almeno 3mm.

- Prima di col le ga re l’apparecchio ac cer tar si che i dati di targa siano rispondenti a quelli della rete di di stri bu zio ne.

- Questo ap pa rec chio dovrà essere de sti na to solo all’uso per il quale è stato espres sa men te concepito, e cioè per sistemi di TVCC. Ogni altro uso è da con si de rar si im pro prio e quindi pericoloso. Il costruttore non può essere con-si de ra to re spon sa bi le per even tua li danni derivanti da usi impropri, erronei ed ir ra gio ne vo li.

- Prima di ef fet tua re qual si a si operazione di pu li zia o di ma nu ten zio ne, disinse-rire l’apparecchio dalla rete di ali men ta zio ne elettrica, spe gnen do l’interruttore del l’im pian to.

- In caso di guasto e/o di cattivo fun zio na men to del l’ap pa rec chio, togliere l’ali men-ta zio ne me dian te l’interruttore e non ma no met tere l’apparecchio. Per l’even tua le ri pa ra zio ne ri vol ger si so la men te ad un centro di assistenza tecnica autorizzato dal costruttore. Il mancato ri spet to di quanto so pra può com pro met te re la si cu rez za del l’ap pa rec chio.

- Non ostru i re le aperture o fessure di ven ti la zio ne o di smaltimento calore e non esporre l’apparecchio a stillicidio o spruzzi d’acqua. Nessun oggetto pieno di li-quido, quali vasi, deve essere posto sull’apparecchio.

- L’installatore deve as si cu rar si che le in for ma zio ni per l’uten te siano pre sen ti sugli ap pa rec chi derivati.

- Tutti gli apparecchi costituenti l’impianto devono essere de sti na ti esclu si va-men te all’uso per cui sono stati con ce pi ti.

- ATTENZIONE: per evitare di ferirsi, questo apparecchio deve essere assicurato al pavimento/alla parete secondo le istruzioni di installazione.

- Questo do cu men to dovrà sem pre ri ma ne re allegato alla do cu men ta zio ne dell’impianto.

Direttiva 2002/96/CE (WEEE, RAEE).Il simbolo del cestino barrato riportato sull’apparecchio indica che il pro-dotto, alla fine della propria vita utile, dovendo essere trattato separata-mente dai rifiuti domestici, deve essere conferito in un centro di raccolta

differenziata per apparecchiature elettriche ed elettroniche oppure riconsegnato al rivenditore al momento dell’acquisto di una nuova apparecchiatura equivalente.

L’utente è responsabile del conferimento dell’apparecchio a fine vita alle appro-priate strutture di raccolta. L’adeguata raccolta differenziata per l’avvio successivo dell’apparecchio dismesso al riciclaggio, al trattamento e allo smaltimento ambien-talmente compatibile contribuisce ad evitare possibili effetti negativi sull’ambiente e sulla salute e favorisce il riciclo dei materiali di cui è composto il prodotto. Per informazioni più dettagliate inerenti i sistemi di raccolta disponibili, rivolgersi al servizio locale di smaltimento rifiuti, o al negozio in cui è stato effettuato l’acquisto.

Rischi legati alle sostanze considerate pericolose (WEEE).Secondo la nuova Direttiva WEEE sostanze che da tempo sono utilizzate comu-nemente su apparecchi elettrici ed elettronici sono considerate sostanze peri-colose per le persone e l’ambiente. L’adeguata raccolta differenziata per l’avvio successivo dell’apparecchio dismesso al riciclaggio, al trattamento e allo smalti-mento ambientalmente compatibile contribuisce ad evitare possibili effetti negativi sull’ambiente e sulla salute e favorisce il riciclo dei materiali di cui è composto il prodotto.

Il prodotto è conforme alla direttiva europea 2004/108/CE e successive.

SAFETY INSTRUCTIONS FOR INSTALLERS- Carefully read the instructions on this leaflet: they give important information on

the safety, use and maintenance of the installation. - After removing the packing, check the integrity of the set. Packing components

(plastic bags, expanded polystyrene etc.) are dangerous for children. Installa-tion must be carried out according to national safety regulations.

- It is convenient to fit close to the supply voltage source a proper bipolar type switch with 3 mm separation (minimum) between contacts.

- Before connecting the set, ensure that the data on the label correspond to those of the mains.

- This apparatus must only be used for the purpose for which it was expressly designed, e.g. for C.C.T.V. systems. Any other use may be dangerous. The manufacturer is not responsible for damage caused by improper, erroneous or irrational use.

- Before cleaning or maintenance, disconnect the set.- In the event of faults and/or malfunctions, disconnect from the power supply

immediately by means of the switch and do not tamper with the apparatus.- For repairs apply only to the technical assistance centre authorized by the

manufacturer.- Safety may be compromised if these instructions are disregarded. - Do not obstruct opening of ventilation or heat exit slots and do not expose

the set to dripping or sprinkling of water. No objects filled with liquids, such as vases, should be placed on the apparatus.

- Installers must ensure that manuals with the above instructions are left on con-nected units after installation, for users’ information.

- All items must only be used for the purposes designed. - WARNING: to prevent injury, this apparatus must be securely attached to the

floor/wall in accordance with the installation instructions.- This leaflet must always be enclosed with the equipment.

Directive 2002/96/EC (WEEE)The crossed-out wheelie bin symbol marked on the product indicates that at the end of its useful life, the product must be handled separately from household refuse and must therefore be assigned to a differentiated col-

lection centre for electrical and electronic equipment or returned to the dealer upon purchase of a new, equivalent item of equipment.

The user is responsible for assigning the equipment, at the end of its life, to the appropriate collection facilities.Suitable differentiated collection, for the purpose of subsequent recycling of de-commissioned equipment and environmentally compatible treatment and dispo-sal, helps prevent potential negative effects on health and the environment and promotes the recycling of the materials of which the product is made. For further details regarding the collection systems available, contact your local waste dispo-sal service or the shop from which the equipment was purchased.

Risks connected to substances considered as dangerous (WEEE).According to the WEEE Directive, substances since long usually used on electric and electronic appliances are considered dangerous for people and the environ-ment. The adequate differentiated collection for the subsequent dispatch of the appliance for the recycling, treatment and dismantling (compatible with the envi-ronment) help to avoid possible negative effects on the environment and health and promote the recycling of material with which the product is compound.

Product is according to EC Directive 2004/108/CE and following norms.

Manuale per l’installazione e l’uso Installation and operation manual · 2015-07-17 ·...

Documents

Transcript of Manuale per l’installazione e l’uso Installation and operation manual · 2015-07-17 ·...