8/2/2019 Manual Rapido Openstage 15 Qr

http://slidepdf.com/reader/full/manual-rapido-openstage-15-qr 1/5

Communication for the open minded

Siemens Enterprise Communications www.siemens-enterprise.com

DocumentationHiPath 8000OpenStage 15 Quick Reference Guide

8/2/2019 Manual Rapido Openstage 15 Qr

http://slidepdf.com/reader/full/manual-rapido-openstage-15-qr 2/5

Operating your phone

2

Operating your phone

Key field

Keypad

In cases where text input is possible, you can use the keypad to input text, punctuationand special characters. To do this, press the numerical keys repeatedly.

Additional functions on the asterisk and hash keys:

Display

Key Function during text input Function when held down

* Write special characters. Deactivate the ring tone

# Switch between upper and lower caseand number entry.

Activate the telephone lock.

N Service menu

O Voicemail/call lists

n Activate/deactivate the loudspeaker

+ Set situation-specific - volumes e. g. for ringtonesor loudspeaker

< Scroll back

= Confirm a function: Scroll forward

j Keypad

S Programmable function keys

13:15 Sat 27.07.07

2222 HiPath 8000

Time and date

Own phone number and menu icon

 13:15 27.07.07

  A 1

Time and dateA new entry in the call lists

8/2/2019 Manual Rapido Openstage 15 Qr

http://slidepdf.com/reader/full/manual-rapido-openstage-15-qr 3/5

Important operating procedures

3

Important operating procedures

In idle mode

Answering a call via the handset

Z   ^

Accepting a call in speakerphone mode

Z  n

Rejecting a call

Z  f "Reject"=

Deflecting a call

Z  f "Deflect"=  j Destination number=

Dialing from the caller list

O  f "Calls"=  f "Missed", "Dialed", "Received" or "Forwarded"= 

 f required entry=  f "Dial"=

Activating callback

j Destination number=  on no reply or busy: f "Call back"= 

Redialing a number

S Redial f "Dialed" f required number=  ^Programming call forwarding

S Call forwarding f "Edit call forwarding"= 

 f "Destination" (e.g. under "All calls")=  "Edit favorites"= 

 f "Destination 1"=  j Number=  f "Options = Save & exit"= 

 f "Save & exit"=  f "Destination" (under required forwarding type e.g. "All calls")= 

 f Select number=  required forwarding type e.g. f "All calls"=  f "On"= 

 f "Options = Save & exit"=  f "Save & exit"=

Activating/deactivating call forwarding for all calls

S Call forwarding /R  Call forwarding

^ Lift the handset j Enter the text or number

\  Replace the handset f Selecting an entry

[ Conduct call Z Ringtone/call waiting tone

Next operating step

8/2/2019 Manual Rapido Openstage 15 Qr

http://slidepdf.com/reader/full/manual-rapido-openstage-15-qr 4/5

Important operating procedures

4

During a call with station A

Switching to speakerphone mode

n Hold down \ (only for USA:n  \)

Consultation

f "Consultation"=  j Station number B=  [ Station B

 f "Disconnect & return"=  [ Station A

Accepting call waiting

Z Call waiting tone f"Accept"=  [ Station B f "Disconnect & return"= 

 [ Station A

Forwarding a call on call waitingZ Call waiting tone f "Deflect"=  j Station B number=  [ Station A

Start conference

"Consultation"=  j Station B number=  [ Station B 

 f "Conference"=  [ Station A and B

Start conference with call waiting

Z Call waiting tone f "Accept"=  [ Station B f "Conference"= 

 [ Station A and B

Transferring a call with station B without consultation

f "Consultation"=  j Destination number=  \

Transferring a call after consultation

f "Consultation"=  j Station B number=  [ Station B \

8/2/2019 Manual Rapido Openstage 15 Qr

http://slidepdf.com/reader/full/manual-rapido-openstage-15-qr 5/5

 Copyright © Siemens Enterprise Communications GmbH & Co. KG Hofmannstr. 51 80200 München Deutschland

Siemens EnterpriseCommunications GmbH & Co. KG

is a Trademark Licensee of Siemens AG

Reference No:A31003-S2000-U137-2-7619

The information provided in this documentcontains merely general descriptions or char-acteristics of performance which in case ofactual use do not always apply as describedor which may change as a result of furtherdevelopment of the products.An obligation to provide the respective char-acteristics shall only exist if expressly agreedin the terms of contract. Availability andtechnical specifications are subject tochange without notice. OpenScape,

OpenStage and HiPath are registered trade-marks of Siemens EnterpriseCommunications GmbH & Co. KG.All other company, brand, product and ser-vice names are trademarks or registeredtrademarks of their respective holders.

Siemens Enterprise Communications www.siemens-enterprise.com

Communication for the open minded