Manual of Mini 3G Wireless Router
-
Upload
marvel-digital -
Category
Devices & Hardware
-
view
8.735 -
download
5
description
Transcript of Manual of Mini 3G Wireless Router
1. Product Specifications
Access mode
3G wireless access (WCDMA/EVDO/ TD-SCDMA)
Wired bandwidth PPPOE, dynamic DHCP, static IP
access
WiFi
Support IEEE802.11b/g/n,IEEE802.3/802.3u
WiFi maximum bandwidth access: 150Mbps
Support 30 WiFi clients access
Support WEP, WPA-PSK, WPA2-PSK wireless
encryption mode
WiFi WDS
(WiFi Distributed
Systems)
Support Bridge mode
Support Repeater mode
Support Lazy mode
Firewall
Based on MAC address/IP address/Port filtering
URL filtering
Web page keyword filtering
Dos Attack Prevention
Anti-ping function
Support the allocation of addresses up to 127
Network application
Application Layer Gateway ALG penetration
Virtual Server
Port triggering
Support UPnP
Support DMZ
Support DDNS
Traffic Management
Management of upstream and downstream flow rates
Support based on IP / MAC address bandwidth
management
Support protocol, port bandwidth management
Interface
1 10/100Mbps LAN/WAN Ethernet port
1 USB2.0 interface (3G network card interface)
1 mini USB charger interface
Battery 1500mAH; endurance is 3-5 hours
Size L 108mm * W 65mm * H 25mm
2. Product Description
POWER
INPUT
RJ45
LED Description
LED Description LED status Memo
Power LED:
Blue Light System Run, normal battery power
Red Light System Run, battery power is not normal
Battery
Charging
Blue Light Charging Finish, or battery full charge
Red Light Under battery power, charging
Network
Access LED
Blue Light Successfully connected to the Internet
Blue Flash Connecting to the Internet
Blue Slow Flash Not connected to the Internet
Wi-Fi LED
Blue Light WIFI Run
Blue Flash WIFI Data transfer
LED off WIFI Disable
WAN/LAN
LED
Blue Light Success of the wired network link
Blue Flash Cable network data transmission
3. PC Configuration
Before setting up the 3G Router, please make sure your PC is configured to “Obtain an IP
address automatically”.
For Windows XP/2000:
Click “Start”->”Control Panel” to open the windows control panel.
Open the “Internet Protocol (TCP/IP) Properties” window.
Select “Obtain an IP address automatically” and “Obtain DNS server address
automatically”. Then click OK.
For Windows Vista / Windows 7:
Go to “Start”->”Setting”->”Control Panel” to open the windows control panel.
Open the “Internet Protocol (TCP/IP) Properties” window.
Select “Obtain an IP address automatically” and “Obtain DNS server address
automatically”. Then click OK.
4. Router Configuration
1. Open your browser, type in 192.168.1.1, press “Enter”, then enter the username and
password (default setting is admin/admin) and click OK.
2. The web page will display when you log in successfully. Click “Wizard” item, enter the
new password then click Next.
3. Select your Time Zone, then click Next.
4. Select your Internet connection type. We select 3G Mode for example.
5. Click “Operator Info”, select the ISP information in the pop up windows then closed it,
click Next for continue.
6. Keep the default LAN settings and click Next to continue. Or you can type the new LAN IP
address and DHCP server IP pool.
7. Type the new SSID in the new window, then click Next to continue.
8. Enter the wireless Security Password to protect your wireless connection and prevent
the unauthenticated user to connect to your 3G Router. Then Click Finish, the 3G Router
will reboot.