Manual Monitor User Guide for Asus VE276Q

VE276Q/VK276Q Series LCD Monitor

User Guide

VE276Q

VK276Q

E5829 V1 April 2010

ii

Copyright © 2010 ASUSTeK COMPUTER INC. All Rights Reserved.No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Table of contentsNotices ......................................................................................................... iiiSafety information ...................................................................................... ivCare & Cleaning ........................................................................................... v1.1 Welcome! ...................................................................................... 1-11.2 Package contents ......................................................................... 1-11.3 Assembling the monitor base ..................................................... 1-21.4 Connect cables ............................................................................. 1-21.5 Monitor introduction .................................................................... 1-3

1.5.1 Front of the LCD monitor ................................................ 1-3

1.5.2 Rear of the LCD monitor ................................................. 1-5

2.1 Detaching the arm/stand(for VESA wall mount) ....................... 2-12.2 Adjusting the monitor .................................................................. 2-22.3 Install LifeFrame 2 software ........................................................ 2-23.1 OSD (On-Screen Display) menu ................................................. 3-1

3.1.1 How to reconfigure .......................................................... 3-1

3.1.2 OSD Function Introduction .............................................. 3-1

3.2 Specifications ............................................................................... 3-63.3 Troubleshooting (FAQ) ................................................................ 3-73.4 Supported Timing List ................................................................. 3-8

iii

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• Thisdevicemaynotcauseharmfulinterference,and

• Thisdevicemustacceptanyinterferencereceivedincludinginterferencethatmaycauseundesiredoperation.

ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsare designed to provide reasonable protection against harmful interference inaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewithmanufacturer’sinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnot occur in a particular installation. If this equipment does cause harmful interferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandreceiver.

• Connecttheequipmenttoanoutletonacircuitdifferentfromthattowhich the receiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

AsanEnergyStar® Partner,ourcompanyhasdeterminedthatthisproductmeetstheEnergyStar® guidelines for energyefficiency.

Canadian Department of Communications Statement

ThisdigitalapparatusdoesnotexceedtheClassBlimitsforradionoise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

iv

Safety information• Beforesettingupthemonitor,carefullyreadallthedocumentationthat

came with the package.

• Topreventfireorshockhazard,neverexposethemonitortorainormoisture.

• Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltagesinsidethemonitormayresultinseriousphysicalinjury.

• Ifthepowersupplyisbroken,donottrytofixitbyyourself.Contactaqualifiedservicetechnicianoryourretailer.

• Beforeusingtheproduct,makesureallcablesarecorrectlyconnectedandthepowercablesarenotdamaged.Ifyoudetectanydamage,contactyourdealerimmediately.

• Slotsandopeningsonthebackortopofthecabinetareprovidedforventilation.Donotblocktheseslots.Neverplacethisproductnearorover a radiator or heat source unless proper ventilation is provided.

• Themonitorshouldbeoperatedonlyfromthetypeofpowersourceindicatedonthelabel.Ifyouarenotsureofthetypeofpowersupplytoyourhome,consultyourdealerorlocalpowercompany.

• Usetheappropriatepowerplugwhichcomplieswithyourlocalpowerstandard.

• Donotoverloadpowerstripsandextentioncords.Overloadingcanresult in fire or electric shock.

• Avoiddust,humidity,andtemperatureextremes.Donotplacethemonitorinanyareawhereitmaybecomewet.Placethemonitoronastable surface.

• Unplugtheunitduringalightningstormorifitwillnotbeusedforalong period of time. This will protect the monitor from damage due to power surges.

• Neverpushobjectsorspillliquidofanykindintotheslotsonthemonitor cabinet.

• Toensuresatisfactoryoperation,usethemonitoronlywithULlistedcomputers which have appropriate configured receptacles marked between 100-240V AC.

• Ifyouencountertechnicalproblemswiththemonitor,contactaqualifiedservicetechnicianoryourretailer.

v

Care & Cleaning• Beforeyouliftorrepositionyourmonitor,itisbettertodisconnectthecables

and power cord. Follow the correct lifting techniques when positioning the monitor.Whenliftingorcarryingthemonitor,grasptheedgesofthemonitor.Donotliftthedisplaybythestandorthecord.

• Cleaning.Turnyourmonitoroffandunplugthepowercord.Cleanthemonitorsurfacewithalint-free,non-abrasivecloth.Stubbornstainsmayberemovedwith a cloth dampened with mild cleaner.

• Avoidusingacleanercontainingalcoholoracetone.UseacleanerintendedforusewiththeLCD.Neverspraycleanerdirectlyonthescreen,asitmaydripinside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:• Thescreenmayflickerduringtheinitialuseduetothenatureofthefluorescent

light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.

• Youmayfindslightlyunevenbrightnessonthescreendependingonthedesktoppatternyouuse.

• Whenthesameimageisdisplayedforhours,anafterimageofthepreviousscreenmayremainafterswitchingtheimage.ThescreenwillrecoverslowlyoryoucanturnoffthePowerSwitchforhours.

• Whenthescreenbecomesblackorflashes,orcannotworkanymore,contactyourdealerorservicecentertofixit.Donotrepairthescreenbyyourself!

Conventions used in this guide

WARNING:Informationtopreventinjurytoyourselfwhentryingtocomplete a task.

CAUTION:Informationtopreventdamagetothecomponentswhentryingtocompleteatask.

IMPORTANT:InformationthatyouMUSTfollowtocompleteatask.

NOTE:Tipsandadditionalinformationtoaidincompletingatask.

vi

WheretofindmoreinformationRefer to the following sources for additional information and for product and software updates.

1. ASUS websitesTheASUSwebsitesworldwideprovideupdatedinformationonASUShardware and software products. Refer to http://www.asus.com

2. Optional documentationYourproductpackagemayincludeoptionaldocumentationthatmayhavebeenaddedbyyourdealer.Thesedocumentsarenotpartofthestandardpackage.

1-1ASUSLCDMonitorVE276Q/VK276QSeries

1.1 Welcome!ThankyouforpurchasingtheASUS®VE276Q/VK276QSeriesLCDmonitor!

ThelatestwidescreenLCDmonitorfromASUSprovidesacrisper,broader,andbrighterdisplay,plusahostoffeaturesthatenhanceyourviewingexperience.

Withthesefeatures,youcanenjoytheconvenienceanddelightfulvisualexperiencethattheVE276Q/VK276QSeriesbringsyou!

1.2 Package contentsCheckyourVE276Q/VK276QSeriesLCDpackageforthefollowingitems:

LCD monitor

Monitor base

1xCD

Quick start guide

1xPowercord

1xVGAcable

1xWebCamUSBcable(OnlyavailableformodelVK276Q)

1xDVIcable

1xAudiocable

Ifanyoftheaboveitemsisdamagedormissing,contactyourretailerimmediately.

1-2 Chapter 1: Product Introduction

1.3 Assembling the monitor baseTo assemble the monitor base:1. Attachthebasetothearmandfixwiththescrewtojointhemtightly.Youcan

easilytightenthescrewbyfingers.

2. Adjustthemonitortotheanglethatismostcomfortableforyou.

Werecommendthatyoucoverthetablesurfacewithsoftclothtopreventdamage to the monitor.

1

2

Make sure to screw the base to the arm tightly.

1.4 Connect cablesTo connect cables:

Connectthecablesyouneedbasedonchapter1.5.2,page1-5.


1.5 Monitor introduction

1.5.1 Front of the LCD monitor

1 2 3 4 5 6 7

1. Button:

Automaticallyadjusttheimagetoitsoptimizedposition,clock,and•phasebylongpressingthisbuttonfor2-4seconds(forVGAmodeonly).

Usethishotkeytoswitchfromsixvideopresetmodes(SceneryMode,•StandardMode,TheaterMode,GameMode,NightViewMode,andsRGBMode)withSPLENDID™VideoEnhancementTechnology.

ExittheOSDmenuorgobacktothepreviousmenuastheOSDmenu•is active.

2. Button:

Press this button to activate the Picture-in-picture function.•

Both the DVI and HDMI input source should not be selected as both the •MainandPIPsourcesimultaneously.

3. Button:

Press this button to decrease the value of the function selected or move •tothenextfuction.

ThisisalsoahotkeyforVolumeadjustment.•

4. MENUButton:

Press this button to enter the OSD menu.•

Pressthisbuttontoenter/selecttheicon(function)highlightedwhilethe•OSD is activated.

1-4 Chapter 1: Product Introduction

5. Button:

Press this button to increase the value of the function selected or move •right/uptothenextfunction.

ThisisalsoahotkeyforBrightnessadjustment.•

6. Input Select Button:

UsethishotkeytoswitchfromVGA,DVI,HDMIandDisplayPortinput•signal.

Press (InputSelectbutton)todisplayHDMIsignalsafteryouconnectHDMIcablewiththemonitor.

7. PowerButton/PowerIndicator:

Pressthisbuttontoturnthemonitoron/off.•

The color definition of the power indicator is as the below table.•

Status Description Blue ON Amber Standbymode OFF OFF


1.5.2 Rear of the LCD monitor

Screw Holes for VESA Wall Mount

Rear connectors1 2 3 4 5 6

7

8

1 AC-IN port2 DisplayPort3 HDMI-IN port4 DVI port5 VGA port6 Audio Line-in port7 Earphone-out port8 USB-IN port (Only available for model VK276Q)

2-1 Chapter 2: Setup

2.1 Detaching the arm/stand (for VESA wall mount)

ThedetachablestandoftheVE276Q/VK276QSeriesLCDmonitorisspeciallydesigned for VESA wall mount.

To detach the arm/stand:1. Disconnectpowerandsignalcables.Carefullyput the front of the monitor

face down on a clean table.

2. Useascrewdrivertoremovethe two screws that secure the stand to the monitor.

3. Detach the stand from the monitor.

• Werecommendthatyoucoverthetablesurfacewithsoftclothtopreventdamage to the monitor.

• Holdthestandofthemonitorwhileremovingthescrews.

TheVESAwallmountkit(100x100mm)ispurchasedseparately.•

UseonlytheULListedWallMountBracketwithminimumweight/load7.9•Kg(Screwsize:4x12mm).


2.2 Adjusting the monitorForoptimalviewing,werecommendthatyoulookatthefullfaceofthe•monitor,thenadjustthemonitortotheanglethatismostcomfortableforyou.

Hold the stand to prevent the monitor from falling while changing its angle.•

Youcanadjustthemonitor’sanglefrom-5˚to20˚.•

-5 ~ 20

2.3 Install LifeFrame 2 software

ASUSVK276Qseriesprovidestheeasy-to-useLifeFrame 2 software that can work withthewebcam,allowinguserstocreatetheirownphotosorvideoclips.

• TheLifeFrame 2softwarecurrentlysupportsMicrosoft® Windows®7/Vista/XPServicePack2operatingsystems.

• TheLifeFrame 2 software is bundled in the support CD.

Installation instructions1. Close all other applications.

2. Insert the support CD into the optical drive and run the LifeFrame 2 program.

3. Follow the on-screen instructions to complete the installation.

3-1 Chapter3:GeneralInstruction

3.1 OSD (On-Screen Display) menu

3.1.1 HowtoreconfigureVE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

Scenery Mode

Standard Mode

Theater Mode

Game Mode

Night View Mode

sRGB

PresstheMENUbuttontoactivatetheOSDmenu.1.

Press 2. and to navigate through the functions. Highlight and activate thedesiredfunctionbypressingtheMENUbutton.Ifthefunctionselectedhasasub-menu,press and again to navigate through the sub-menu functions.Highlightandactivatethedesiredsub-menufunctionbypressingtheMENUbutton.

Press 3. and to change the settings of the selected function.

ToexittheOSDmenu,pressthe4. button. Repeat step 2 and step 3 to adjustanyotherfunction.

3.1.2 OSD Function IntroductionSpendid1. Thisfunctioncontainssixsub-functionsthatyoucanselectforyourpreference.EachmodehastheResetselection,allowingyoutomaintainyoursettingorreturntothepresetmode.

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

Scenery Mode

Standard Mode

Theater Mode

Game Mode

Night View Mode

sRGB

Scenery Mode• :ThisisthebestchoiceforsceneryphotodisplayingwithSPLENDID™VideoEnhancement.


Standard Mode• : This is the best choice for document editing with SPLENDID™VideoEnhancement.

Theater Mode• : This is the best choice for movie watching with SPLENDID™VideoEnhancement.

Game Mode• :ThisisthebestchoiceforgameplayingwithSPLENDID™Video Enhancement.

Night View Mode• :Thisisthebestchoiceforplayingdark-scenegameorwatchingmoviewithSPLENDID™VideoEnhancement.

In the • Standard Mode and sRGB,theSaturation,Color Temp.,Skin Tone,Sharpness,andASCR functions are not user-configurable.

2. ColorSelecttheimagecoloryoulikefromthisfunction.

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

Brightness

Contrast

Saturation

Color Temp

90

80

User Mode

Skin Tone

Brightness• : The adjusting range is from 0 to 100. The button is also a hotkeytoactivatethisfunction.

Contrast• : The adjusting range is from 0 to 100.

Saturation• : The adjusting range is from 0 to 100.Color Temp.• :Containsthreepresetcolormodes(Cool,Normal,Warm)andoneUserMode.

Skin Tone• :ContainsthreecolormodesincludingReddish,Natural,andYellowish.

IntheUserMode,colorsofR(Red),G(Green),andB(Blue)areuserconfigurable; the adjusting range is from 0 ~ 100.


3. ImageYoucanadjusttheimageSharpness,TraceFree,AspectControl,Position(VGAonly),andFocus(VGAonly)fromthismainfunction.

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

Focus

Sharpness

Trace Free

Aspect Control

ASCR

50

0

Full

Position

Sharpness• : Asjusts the picture sharpness. The adjusting range is from 0 to 100.

Trace Free• : SpeedsuptheresponsetimebyOverDrivetechnology.Theadjusting range is from lower 0 to faster 100.

Aspect Control• :Adjuststheaspectratioto“Full”,“4:3”,“1:1”,or“OverScan”(OnlyavailableforHDMIinput).

ASCR• :SelectYESorNOtoenableordisabledynamiccontrastratiofunction.

Position• :Adjuststhehorizontalpostition(H-Position)andtheverticalposition(V-Position)oftheimage.Theadjustingrangeisfrom0to100(OnlyavailableforVGAinput).

Focus• :ReducesHorizonal-linenoiseandVertical-linenoiseoftheimagebyadjusting(Phase)and(Clock)separately.Theadjustingrangeisfrom0to100(OnlyavailableforVGAinput).

4. SoundAdjuststhesoundsettingstoyourpreference.

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

Volume

Bass

Treble

Balance

50

50

50

50

OFFMute


Volume• : Adjusts the output volume level. The buttonisalsoahotkeyto activate this function.

Bass• : Adjusts the output bass level.

Treble• : Adjuststhe output treble level.

Balance• : Adjusts the balance between the left and right front speakers.

Mute• : Mutes the output volume.

5. PIP SetingsThePIPSettingsallowsyoutoopenupanothersub-windowconnectedfromanothervideosourcebesidesthemain-windowfromyouroriginalvideosource.Byactivatingthisfunction,youcanhavetwopicturesfromtwodiferentvideosourcesdisplayedbyonemonitor.

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

PIP Mode

PIP Source

Size

Position

OFF

Swap

PIP Mode• : Turns the PIP function on or off.

PIP Source• :SelectsthevideoinputsourcefromVGA,DVI,HDMI,orDisplayPortconnector.

Size• :AdjuststhePIPsize.Theoptionsare:Small,Middle,orLarge.

Position• : Adjusts the PIP postion in the main-window. The options are: Right-Top,Left-Top,Right-Bottom,orLeft-Bottom.

SWAP• : Swaps the source of the main and sub-window.

Both the DVI and HDMI input sources should not be selected each for theMainandPIPsourcesimultaneously.

Main-Channel

Sub-Channel

VGA DVI HDMI DisplayPortVGA • • •DVI • X •

HDMI • X •DisplayPort • • •


6. Input SelectSelect the input source from VGA,DVI,HDMI,orDisplayPort.

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

VGA

DVI

HDMI

DisplayPort

7. System SetupAdjuststhesystemconfiguration.

VE276

Splendid

Color

Image

Sound

PIP Settings

Input Select

Move Menu Exit

System Setup

Language

All Reset

Splendid Demo Mode OFF

OFF

English

AI Light

OSD Setup

Information

Splendid Demo Mode• : Activate the demo mode for the Splendid function.

AI Light• :Automaticallyadjustthescreenbacklightaccordingtothe surroundings. The monitor backlight will turn brighter in a bright surroundings,orturndarkerinadarksurroundings.Asthelightsensorislocatedonthetopofthemonitor,donotblockthesensingarea.

OSD Setup• :Adjuststhehorizontalpostition(H-Position),verticalposition(V-Position),OSDTimeout,DDD/CI,andTransparencyoftheOSDscreen.

Information• :Displaysthemonitorinformation.

Language• :SelectsOSDlanguage.TheselectionsareEnglish,French,German,Spanish,Italian,Dutch,Russian,TraditionalChinese,SimplifiedChinese,andJapanese.All Reset• :Setto“Yes”torevertallsettingstothefactorydefaultmode.


3.2 Specifications

Model VE276Q VK276QPanelSize 27.0”W(68.6cm) 27.0”W(68.6cm)

Max.Resolution 1920x1080 1920x1080

Brightness(Max.) ≧300cd/㎡ ≧300cd/㎡

IntrisincContrastRatio(Max.) ≧1000:1 ≧1000:1

ViewingAngle(CR=10) ≧160°(V);≧170°(H) ≧160°(V);≧170°(H)

DisplayColors 16.7M(6bitHiFRC) 16.7M(6bitHiFRC)

Response Time 2ms(GraytoGray) 2ms(GraytoGray)

Webcam(built-in) - 2.0M

Satellite Speaker 3Wx2stereo 3Wx2stereo

Earphone Output Yes Yes

Sound from HDMI Yes Yes

HDMI input Yes Yes

DVI input DVI with HDCP DVI with HDCP

D-Sub input Yes Yes

DisplayPortinput Yes Yes

Audio Line-in Yes Yes

PowerONConsumption 75W 75W

Tilt -5° ~ +20° -5° ~ +20°

VESA Wall Mounting Yes(100mmx100mm) Yes(100mmx100mm)

Phys.Dimension(WxHxD) 643x445.6x220 643x459.6x220

BoxDimension(WxHxD) 732x560x176 732x560x176

NetWeight(Esti.) 7.2 kg 7.2 kg

GrossWeight(Esti.) 10.5 kg 10.5 kg

Voltage Rating AC100~240V(Built-in) AC100~240V(Built-in)

*Specificationsaresubjecttochangewithoutnotice.


3.3 Troubleshooting (FAQ)

Problem Possible Solution

PowerLEDisnotON Press the • button to check if the monitor is in the ONmode.Checkifthepowercordisproperlyconnectedtothe•monitor and the power outlet.

The power LED lights amber and there is no screen image

Check if the monitor and the computer are in the •ONmode.Makesurethesignalcableisproperlyconnected•the monitor and the computer.Inspect the signal cable and make sure none of the •pins are bent.Connect the computer with another available •monitortocheckifthecomputerisproperlyworking.

Screen image is too light or dark Adjust the Contrast and Brightness settings via •OSD.

Screen image is not centered or sizedproperly

Press the • button for two seconds to automaticallyadjusttheimage.Adjust the H-Position or V-Position settings via •OSD.

Screen image bounces or a wave pattern is present in the image

Makesurethesignalcableisproperlyconnectedto•the monitor and the computer.Moveelectricaldevicesthatmaycauseelectrical•interference.

Screen image has color defects (whitedoesnotlookwhite)

Inspect the signal cable and make sure that none of •the pins are bent.Perform Reset via OSD.•AdjusttheR/G/BcolorsettingsorselecttheColor•Temperature via OSD.

Screenimageisblurryorfuzzy Press the • button for two seconds to automaticallyadjusttheimage(forVGAmodeonly).Adjust the Phase and Clock settings via OSD.•

Nosoundorsoundislow Ensurethattheaudiocableisproperlyconnectedto•the monitor and the computer.Adjustthevolumesettingsofbothyourmonitorand•computer.Ensure that the computer sound card driver is •properlyinstalledandactivated.

Webcam is not working MakesurethatyouhaveconnectedtheUSB2.0•cablesecurelytoboththeLCDmonitorandyourcomputer.MakesurethatyouusetheMicrosoftWindows•Vista/XPServicePack2operationsystems.


3.4 Supported Timing ListPC Supported Primary Timing

ModeInput

Aspect Ratio

Resolution H(KHz) V(Hz) Pixel (MHz)

VGA 4:3

640x480,60Hz 31.469 59.94 25.175

640x480,72Hz 37.861 72.809 31.5

640x480,75Hz 37.5 75 31.5

640x480,85Hz 43.269 85.008 36

SVGA 4:3

800x600,56Hz 35.156 56.25 36

800x600,60Hz 37.879 60.317 40

800x600,72Hz 48.077 72.188 50

800x600,75Hz 46.875 75 49.5

800x600,85Hz 53.674 85.061 56.25

XGA 4:3

1024x768,60Hz 48.363 60.004 65

1024x768,70Hz 56.476 70.069 75

1024x768,75Hz 60.023 75.029 78.75

1024x768,85Hz 68.677 84.997 94.5

SXGA4:3

1152x864,75Hz 67.5 75 108

1280x960,60Hz 60 60 108

5:41280x1024,60Hz 63.981 60.02 1081280x1024,75Hz 79.976,P 75.025 135

WXGA+ 16:101440x900,60Hz 55.935 59.887 106.51440x900,75Hz 70.635 79.984 136.75

WSXGA+ 16:10 1680x1050,60Hz 65.29 59.954 146.251080P 16:9 1920x1080,60Hz 67.5 60 148.5

IBM Modes, Factory Preset Timing(D-SUB, DVI-D, HDMI inputs)

ModeInput

Aspect Ratio


DOS640x350,70Hz 31.469 70.087 25.175

640x350,85Hz 37.861 85.08 31.5

DOS720x400,70Hz 31.469 70.087 28.322

720x400,85Hz 37.927 85.039 35.5

MAC Modes, Factory Preset Timing(D-SUB, DVI-D, HDMI inputs)

ModeInput

Aspect Ratio


VGA 4:3 640x480,67Hz 35 66.667 30.24SVGA 4:3 832x624,75Hz 49.725 74.551 57.2832


VESA Modes, User Available Timing

ModeInput

Aspect Ratio


720P16:9 1280x720,60Hz(RB) 44.444 59.979 6416:9 1280x720,60Hz 44.772 59.855 74.516:9 1280x720,75Hz 56.456 74.777 95.75

WXGA

1280x768,60Hz(RB) 47.396 59.995 68.2516:10 1280x800,60Hz(RB) 49.306 59.91 7116:10 1280x800,60Hz 49.702 59.81 83.516:10 1280x800,75Hz 62.795 74.934 106.5

WSXGA+16:10 1440x900,60Hz(RB) 55.469 59.901 88.7516:10 1440x900,75Hz 70.635 79.984 136.75

WSXGA+ 1680x1050,60Hz(RB) 64.674 59.883 1191080P 16:9 1920x1080,60Hz 66.587 59.934 138.5

HDMI Supported Primary TimingVESA Modes, Factory Preset Timing

ModeInput

Aspect Ratio


480i4:3 720(1440)x480i,59.94/

60Hz15.734/15.75 59.94/60 27/27.027

16:9 720(1440)x480i,59.94/60Hz

15.734/15.75 59.94/60 27/27.027

480P

4:3 640x480P,59.94/60Hz 31.469/31.5 59.94/60 25.175/25.2

4:3 720x480P,59.94/60Hz 31.469/31.5 59.94/60 27/27.027

16:9 720x480P,59.94/60Hz 31.469/31.5 59.94/60 27/27.027

576i4:3 1440x576i,50Hz 15.625 50 27

16:9 1440x576i,50Hz 15.625 50 27

576P4:3 720x576P,50Hz 31.25 50 27

16:9 720x576P,50Hz 31.25 50 27

720P16:9 1280x720P,50Hz 37.5 50 74.2516:9 1280x720P,59.94/60Hz 44.955/45 59.94/60 74.176/74.25

1080i16:9 1920x1080i,50Hz 28.125 50 74.25

16:9 1920x1080i,59.94/60Hz 33.716/33.75 59.94/60 74.176/74.25

HDMI Supported Optional Timing

ModeInput

Aspect Ratio


480P4:3 1440x480P,59.94/60Hz 31.469/

31.5 59.94/60 54/54.054

16:9 1440x480P,59.94/60Hz 31.469/31.5 59.94/60 54/54.054

576P4:3 1440x576P,50Hz 31.25 56.25 54

16:9 1440x576P,50Hz 31.25 50 54

1080P16:9 1920x1080P,50Hz 56.25 50 148.5

16:9 1920x1080P,59.94/60Hz 67.433/67.5 59.94/60 148.352/148.5

* The modes not listed in the above tables may not be supported. For optimal resolution, we recommend that you choose a mode listed in the above tables.

Manual Monitor User Guide for Asus VE276Q

Documents

Transcript of Manual Monitor User Guide for Asus VE276Q