Manual Machine Tools & Band Saw Machines Manual Machine Tools & Band Saw Machines MACHINE TOOLS ......
Transcript of Manual Machine Tools & Band Saw Machines Manual Machine Tools & Band Saw Machines MACHINE TOOLS ......
229
Manual Machine Tools & Band Saw Machines
MACHINE TOOLS
Band Saws ............................................................................233-239Bench Grinders ............................................................................ 230Boring & Milling Machines ........................................................... 246Circular Sawing Machines ............................................................ 240Cold Saws .................................................................................... 233Double Mitering Band Saws ......................................................... 233Drill Sharpeners ........................................................................... 231
Drilling Machines ..................................................................241-242Fully Automatic Horizontal Band Saws ................................. 235, 238Fully Automatic Vertical Band Saws ............................................. 237Horizonal Band Saws ........................................................... 235, 238Milling Machines ...................................................................243-245Precision Lathes ...................................................................247-248Pulse Cutting Band Saws ............................................................. 239Radial Drills .................................................................................. 242Scissor Style Band Saws ...................................................... 233, 236Surface Grinders .................................................................. 230, 232Swing Head Mitering Band Saws ................................................. 234Vertical Mitering Band Saws .........................................236-237, 239
MACHINE TOOLS
230
6 INCH - 1/3 HPFEATURES:• 2 grinding wheels: 6" x .75" x .5" -36 Grit and
6" x .75" x .5" -60 Grit• Guards are non-exhaust type• Furnished with GA10
eyeshields• 115V, 1-phase
motor, 3,600 RPM
7 INCH - 1/2 HPFEATURES:• 2 grinding wheels: 7" x 1" x 5/8" -36 Grit and
7" x 1" x 5/8" -60 Grit• Guards are cast iron, exhaust type• Furnished with
GA10 eyeshields• 115V, 1-phase
motor, 3,600 RPM
8 INCH - 3/4 HPFEATURES:• 2 grinding wheels: 8" x 1" x .75" -36 Grit
and 8" x 1" x .75" -60 Grit• Guards are cast iron, exhaust type• Furnished with GA11 eyeshields• Supplied with cast
iron tool rests• 115/230V, 1-phase
motor, 3,600 RPM
10 INCH - 1 HPFEATURES:• 2 grinding wheels: 10" x 1" x 7/8" -36 Grit and
10" x 1" x 7/8" -60 Grit• Guards are cast iron, exhaust type• Furnished with GA11 eyeshields• Supplied with cast
iron tool rests• 115/230V, 1-phase
motor, 1,800 RPM
STANDS AVAILABLE - CALL FOR DETAILS
INDUSTRIAL BENCH GRINDERSDX SERIES
OKAMOTO INTERNAL GRINDERS
SURFACE GRINDERS
SADDLE TYPE PRECISION SURFACE GRINDING MACHINESFEATURES:ACC-DX Series grinders provide effortless set-up, simplicity of operation and consistent accuracy and reliability unmatched to any grinders in their class.• Double Vee Way Table Construction
For both the longitudinal and crossfeed axes. Provides true tracking, greater load support and longer effective life of built-in accuracy.
• Heavy-Duty Column Construction Added rigidity for coarse and extra-fine grinding.
• Hand Scraped Way Surfaces Deliver superior accuracy and machine longevity.
• Wheel Spindle Utilizes super-precision pre-loaded ball bearings for optimum stiffness.
• DXV Option Package of Automatic Grinding wheel dresser, automatic dress compensation and retract function are available.
MDI & CNCStraight and tapered, single or multi-stepped, shaped or contoured and forms - or outside surfaces can be ground on these machines. Choose from MDI control or CNC - select the machine that solves your problems.
Please contact your local Thomas Skinner Machine Tools Salesperson for complete
product & pricing information.
DESCRIPTION ORDER #6 inch 612
DESCRIPTION ORDER #8 inch 8107W
DESCRIPTION ORDER #7 inch 712E
DESCRIPTION ORDER #
10 inch 1022W
CapacityTable Working Surface (W x L) 12 x 24”Maximum Table Movement (manual) 29.5”Max. Dist. Between Wheel & Table 13.6”Magnetic Chuck Size (W x l x H) 12 x 24 x 3.2”Table Load Capacity Including Chuck 925 lbsMotorsGrinding Wheel Spindle 5 hpVertical Feed 0.5 AC Servo MotorHydraulic Oil Pump 2 hpOrder # ACC-12.24DXReg. List $ USD ON REQUEST
MACHINE TOOLS
231
3MM CAPACITYPATENTED FEATURES:• Double-bearing grinding unit (reduces wear)• Drill tightening design with bearing device• Adjustable trimming angleSTANDARD ACCESSORIES:• ER20 Collets, ranged from 2.5 - 13mm (12pcs)• CBN Diamond wheel #200 x 1pc (for High Speed drill)• 3mm and 4mm Hexagon (Hex) wrench x 1pc eachDrill diameter: Ø2 - Ø13mmMotor: 90WPoint angle: 85° ~ 140°RPM: 6,000 RPMPower supply: AC110 / AC220, 60 Hz Weight: 10 kg
MODEL DM213 MODEL DM1226
FAST DRILL SHARPENERS
MODEL ORDER #DM213 326-130
MODEL ORDER #DM1226 326-134
30MM CAPACITYPATENTED FEATURES:• Double-bearing grinding unit (reduces wear)• Drill tightening design with bearing device• Adjustable trimming angleSTANDARD ACCESSORIES:• ER 40 Collets, ranged from 12 - 26mm (15pcs)
Optional Collets 8~11mm, 27~30mm• CBN Diamond wheel #200 x 1pcs (for High Speed drill)• 3mm and 4mm Hexagon (hex) wrench x 1pc eachDrill diameter: Ø8 - Ø30mmMotor: 450WPoint angle: 85° ~ 140° RPM: 4,000 RPMPower supply: AC110 / AC220, 60 Hz Weight: 25 kg
PARTS.SERVICE.TECH SUPPORT.
THOMAS SKINNER FULL SERVICE & TECHNICAL SUPPORT TEAM
MAXIMIZE YOURINVESTMENTWITH QUALITY SERVICE.
PREVENTATIVEMAINTENANCE PROGRAMS FOR HAAS & OKUMA.
PARTS, COORDINATION & TECH SUPPORT, INCLUDING AFTER HOURS
1-866-779-2131
CERTIFIED TECHNICAL
SERVICE ENGINEERS LOCATED
IN BRITISH COLUMBIA, ALBERTA,
SASKATCHEWAN & MANITOBA.
LARGESERVICETEAM TO
KEEP YOURUNNING.
WE SERVICE BOTH HAAS & OKUMA
MACHINES.
MACHINE TOOLS
232
Large column model
shown.
KGS-616S MANUAL SERIESKGS-250AHD & KGS-63AHD AUTOMATIC SERIES, SADDLE TRAVELING TYPEFEATURES:• High precision cartridge type wheel spindle with super precision angular contact ball bearings insure
accurate grinding performance, bearings are lubricated by grease for life, suitable for heavy cutting
• Sturdy double walled with symmetrical design provides utmost rigidity, minimizes thermal distortion and ensures accuracy
• Main components of the machine are made of stabilized Meehanite cast iron to achieve good shock absorption; heavy walls, heavy cross rib and superior design make this an extremely rigid machine
• X- and Z-axis way surfaces are coated with Turcite-B, match scraped to the cast iron supports
• Operators control panel accommodates all electrical controls in a clear and ergonomical fashion, with 24 V control circuit making operation particularly easy and safe
• AHD models have 2 proximity switches used for table longitudinal travel reversing control to eliminate noise and guarantee lasting performance
• AHD models provides power down feed and auto-down feed to further enhance productivity
STANDARD EQUIPMENT:• Wheel balancing base
and arbor• Wheel flange and
grinding wheel• Diamond dresser• Work light• Auto lubricator• Complete coolant system
and splash guard• Parallel dressing
attachment
MODELS KGS-616S, KGS-250AHD & KGS-63AHDHIGH PRECISION SURFACE GRINDERS
All models are available as a “Wizard” Series• WM1 - Programmable Downfeed Surface Grinder• WMA1 - Programmable Downfeed Surface Grinder with Automatic Compensate Over-Head Dresser• WM2 - Programmable Downfeed and Crossfeed Surface Grinder• WMA2 - Programmable Downfeed and Crossfeed Surface Grinder with Automatic Compensate Over-Head Dresser
AUTOMATIC SURFACE GRINDERS, LARGE COLUMN TRAVELLING TYPE – PRICING AVAILABLE UPON REQUEST
OPTIONAL EQUIPMENT:• Extra wheel flanges• Demagnetizer• Sine bar• Dust suction/
coolant system• Magnetic separator
MODELSKGS-510AH/ AHD KGS-515AHD KGS-615AHD KGS-620AHD KGS-715AHD
KGS-820/825/ 830AHD
KGS-920/925/ 930AHD
Table work surface 20 x 40" 20 x 60" 24 x 60" 24 x 80" 28 x 60" 32 x 80/100/120" 36 x 80/100/120"Longitudinal table travel 44.9" 63" 63" 87.8" 63" 88.6"/108.3"/128"Crossfeed table travel 21.3" 22.4" 26" 29.9" 34.8" 37.8"Max distance centre spindle to table 22.6" 23.6" 32.7"Grinding wheel dim (OD x T x ID) 14" x 1.5 x 5" 14" x 2 x 5" 20 x 2 x 5"Spindle speed (60 Hz) 1,740 RPM 1,150 RPMSpindle motor 7.5 HP 10 HP 15 HPHydraulic pump motor 3 HP 5 HP 10 HP to 15 HP depending on bed lengthCrossfeed motor 1/4 HP 1/4 HP Hydraulic
MODEL KGS-250AHD KGS-63AHDTable work surface 18 x 8" 23.6 x 11.8"Longitudinal table travel 21.25" 28"Crossfeed table travel 10.25" 13.375"Max distance centre spindle to table 18.7" 23.62"Grinding wheel dim (OD x T x ID) 7.5" x 1.25" 14 x 1.5 x 5"Spindle speed 3,480 RPM 1,740 RPMSpindle motor 2 HP 5 HPHydraulic pump motor 1 HP 2 HPCrossfeed motor 1/5 HPORDER # KEN-KGS250AHD KEN-KGS63AHD
MACHINE TOOLS
233
C370 SERIESCOLD SAWS
C370-2SIA semi-automatic vertical column cold saw with the largest capacity in our cold saw line up, and miters 60° to left to 45° right.Capacity at 900: Rectangle Hollow 7" x 3.75" Square Hollow 4.33" Round Hollow 4.75"C370CNCIs an automatic vertical column cold saw that miters from 60° left to 45° right. It has a standard 40" single stroke, multi-indexing material feed system. It is the ideal choice for quick, clean, accurate metal cutting.
Capacity at 900: Rectangle Hollow 7" x 4" Square Hollow 4.25" Round Hollow 4.75"
SERIES FEATURES:• Variable blade speed 15 - 150 RPM• 4.75" round hollow capacity• 7.5 HP motor• 14.5" blade• Mitering 60° left to 45° right
MODEL ORDER # PRICEC370-2SI C370-2SI $24,500C370CNC C370CNC $49,900
C370-2SI model shown
Call our Customer Service Team at 1-866-999-3117 for all your Machine Tool needs.Open weekdays 7:00am to
4:30pm Pacific Time.
Other models are available – call your local Machine Tool
Rep for details.
All Hydmech Machines are F.O.B. Woodstock, ON
COMPACT SCISSOR DOUBLE MITERINGDM-10 FEATURES:• Easy sliding, cast iron vises• 2/2.5 HP, 3-phase drive (also available with 1-phase drive)• Double mitre capability from 60o left and up to 45o right• Rotating table with single cut line• Carbide guides for longer blade life• Work stop• Coolant pump for band lubrication and cooling• Gravity feed or manual feed• Dual blade speed selector• Heavy duty cast iron wheels• Conveniently located control panel within safe operator reach• Safety limit switches• Manual blade tension with tension meter and blade breakage switch• UL and CSA compliance• Compact size at a very compacted priceSPECIFICATIONS:• 7.75"" x 11" rectanglar capacity• 9" x 9" square capacity• 10" dia round capacity• 1" x 9’ 8" blade length• 12" blade wheel diameter• 2/2.5 HP blade drive• 34" table height
OPTIONS:• Pneumatic vise with foot pedal• 24" calibrated work stop• Mist coolant system• 1-phase• K110 5’ infeed/outfeed table,
240 lb load per roller(Adaptor plates needed when joining the K110 to the band saw - outfeed side only)
DM SERIESBAND SAWS
All Hydmech Machines are F.O.B. Woodstock, ON
MODEL ORDER # PRICEDM-10 (1-phase) HYD-DM101PH $10,700 DM-10 (3-phase) HYD-DM103PH $9,600
DM-12 DM12 $12,500 DM-1318P DM1318P $25,000
DM-10 model shown
MACHINE TOOLS
234
SWING HEAD MITERINGS-20-M STANDARD FEATURES:
SWING HEAD MITERINGS-23-A STANDARD FEATURES:
S-20 SERIES III S-23 SERIES III
BAND SAWS
S-20-M
All Hydmech Machines are F.O.B. Woodstock, ONAll Hydmech Machines are F.O.B. Woodstock, ON
• 13" x 18" capacity• 1" x 14’10" blade size• 90o to 60o mitre capacity• 17.75" cast iron band wheels• 3 HP, 3-phase direct drive with
A/C inverter offering variable band speed (45 - 330 SFM)
• Cast iron guide arms, adjustable idler guide arm, supported by linear bearings
• Safety door interlocks• Heavy-duty vise with quick
locking lever system• Pre-set carbide guide
inserts• Manual blade tension
with LED display on control panel ensures proper blade tension
• Gravity feed with fast approach button
• 16" x 20" capacity• 1-1/4" x 16’10" blade size• 60o miter capability, one way• 8.8 HP, 3-phase VFD blade drive• Coolant system with coolant
wash power hose• Full stroke hydraulic vising• Output table has a coolant
return tray• Blade breakage switch• PLC control• Heavy-duty cast iron guide arms
and wheels with a rigid pivot point that helps reduce vibration during cutting
• Carbide guides for longer blade life
• Full stroke vises with 29" shuttle stroke
• Positive hydraulic down feed
• Blade breakage switch• Ergonomically positioned “swing away” control panel• Work light• Laser light• Flood coolant system and wash
down hoseOPTIONS:• 34" adjustable material stop• Mist lubrication system• 5’ idler conveyor• Power conveyors
• Heavy duty gearbox and motor assembly
• Powered chip brush• Easy access servicing panel• Laser light• Out of stock switch• Work lightOPTIONS:• Mist lubrication• Variable vise pressure• Full capacity hydraulic
overhead bundling• Idler & powered conveyors
S-23-A-IIIMODEL
S-20-M Manual Band
Saw
S-20-P Semi-Automatic Band
Saw
S-20-A Fully-Automatic Band
Saw
Capacity
90o rectangular 13 x 18”90o round 13” dia
45o rectangular 13 x 10.75”45o round 12” dia
60o rectangular 13 x 7.75”60o round 8.5” dia
Blade sizeLength 14’ 10”Width 1”
Thickness .035”Blade speed 45 - 330 SFM 75 - 350 SFMBlade wheel diameter 17.75”
MotorBlade 3 HP 5 HP VFD
Hydraulic - 1/2 HP 1 HPTable height 31”Overall dimensions (W x L x H)
92 x 75 x 52” 93 x 86 x 52”
Maximum workload 5,000 lbs 8,000 lbs 5,000 lbsORDER # HYD-S20 HYD-S20P HYD-S20AMSRP PRICE $14,500 $18,500 $32,900
MODELS-23-P Semi-Automatic Band Saw
S-23-A-III Fully-Automatic Band
Saw
Capacity
90o rectangular 16 x 20”90o round 16” dia
45o rectangular 16 x 14”45o round 14” dia
30o rectangular 16 x 9.5”30o round 9.5” dia
Blade size Length 16’ 7”Width 1.25”
Blade speed 75 - 350 SFMBlade wheel diameter 19”
Motor Variable frequency 5.5 HPHydraulic 1 HP
Table height 29.33” 29.5”Overall dimensions (W x L x H)
96 x 56 x 56”
ORDER # S23P S23AIIIMSRP PRICE $25,000 $42,500
MACHINE TOOLS
235
PROGRAMMABLE HEAVY-DUTY HORIZONTALSTANDARD FEATURES:• Extremely heavy duty cast iron guide arms and wheels• Heavy-duty full stroke vises• Hardened and replaceable wear strips/vise plates• Carbide guides• Heavy-duty gearbox and motor assembly• Variable frequency drive• Easy access servicing panels• Wash down hose• Powered blade brush• Hydraulic guide arm positioning• Hydraulic blade tension • Hydraulic chip auger • Blade breakage switch• Hydraulic vise control• H-11-A, H-14-A, H-18-A
and H-22-A are standard with split vise
• PLC 100 control• Work light• Readily available and
easy-to-replace parts• Blade deviation monitor
(H-11A & H-14A)OPTIONS:• Full capacity hydraulic
overhead bundling• Variable vise pressure• Vertical rollers• 6o cant head
(not available on all models)• Out-of-stock switch
(standard on H-11-A and H-14-A)
• Mist lubrication• Blade deviation monitor • Laser light
(H-11-A, H-14-A, H-18-A, H-22-A, H-28-A and H-32-A only)
• Outboard vise (H-22-A and H-28-A only)
H SERIESBAND SAWS
H-10-A
All Hydmech Machines are F.O.B. Woodstock, ON
Larger machines available. Contact your local Thomas Skinner Machine
Tools Salesperson for details.
MODELH-11-A Automatic Band
SawH-14-A Automatic Band
SawH-18-A Automatic Band
SawH-22-A Automatic Band
Saw
Capacitysquare 11 x 11” 14 x 14” 18 x 18” 22 x 22”round 11” dia 14” dia 18” dia 22” dia
w/canted head - 20” x 22”
Blade sizeLength 14’9” 15’4” 19’ 2” 22’ 6”Width 1-1/4” 1-1/2” 2”
Thickness .042” .042” .050” .063”Blade speed VFD 50 - 350 SFM 40 - 300 SFMBlade wheel diameter 16” 19” 22” 27”
Motor Blade 6 HP 7.5 HP 10 HPHydraulic 1 HP 2 HP 3 HP
Hydraulic system pressure 600 PSI 700 PSI 1,000 PSIShuttle stroke 0 - 24” single stroke 0 - 34” single stroke, multi-shuttle capability
Maximum workload 4,000 lbs 6,000 lbs 10,000 lbs 15,000 lbsOverall dimensions (W x L x H)
100 x 73 x 78” 94 x 81 x 74” 127 x 88 x 92” 141 x 88 x 92”
ORDER # HYD-H11A HYD-H14A HYD-H18A HYD-H22AMSRP PRICE TBA TBA $67,900 $78,900
MODELH-28-A Automatic Band
SawH-26/42 Semi- Automatic
Band SawH-32-A Automatic Band
SawH-40/40 Semi-Automatic
Band Saw
Capacityround 28” dia 32” dia 40” dia
rectangular 28 x 28” 42 x 26” 32 x 32” 40 x 40”6º cant head 24 x 28” 120 canted head 28 x 32” -
Blade sizeLength 25’ 33’ 30’ 4” 37’Width 2” 2-5/8” 3”
Thickness .063”Blade speed VFD 40 - 300 SFM 75 - 300 SFM 40 - 300 SFM 45 - 225 SFMBlade wheel diameter 38” 45”
Motor Blade 10 HP 20 HPHydraulic 5 HP
Hydraulic system pressure 1,200 PSI 1,300 PSI 1,200 PSI
Shuttle stroke0-32” single stroke,
multi-index capability-
0-32” single stroke, multi-index capability
-
Maximum workload 30,000 lbs 50,000 lbsOverall dimensions (W x L x H)
161 x 92 x 120” 217 x 82 x 137” 182 x 92 x 120” 215 x 102 x 145”
ORDER # H28A HYD-H2642 HYD-H32A H40/40MSRP PRICE $108,900 $108,500 $139,000 $219,900
MACHINE TOOLS
236
HEAVY DUTY SCISSOR STYLEThis Pivot-Style band saw provides exceptional mitre cutting capability for multi-shift, high production environments. Ideal for use in tight working spaces, set-up time is reduced by the versatile swing head. The M-20-A can be programmed to handle 99 different jobs, running as many as 5 jobs consecutively in the job queue.STANDARD FEATURES:• Fully automatic controls
M SERIESBAND SAWS
• 60o mitre capability• Carbide guides• 33" shuttle stroke• Blade breakage switch• PLC 500 program control• Hydraulically driven
chip auger• Hydraulic vice control
• Hydraulic head swing• Hydraulic guide arm• Hydraulic blade tension
adjustment• Work light• Laser light• Digital angle
display
OPTIONS:• Full capacity hydraulic overhead bundling
(2 vises)• Out-of-stock switch• Variable vise pressure (2 vises)• Vertical rollers• Blade deviation monitor• Mist lube• Chip bucket• Outboard vise (M-20-A only)
M-16-A
VERTICAL MITERINGThe innovative design and rugged construction of these band saws makes sure they’re going to be around long after the competition has quit. Heavy duty hydraulics give these saws the dependability that you have come to expect from the Hydmech line.STANDARD FEATURES:• Hydraulic downfeed pressure• Hydraulic positioned head swing 45° left or right (V-18 and
V-18-APC only)• Hydraulically positioned guide arms (V-18 and V-18-APC only)• Hydraulic full stroke vise• Flood coolant and flush hose• Head frame carriage moves on linear guideways• Powered blade brush
The control console allows the operator control of all machine functions. This means never having to push or pull - simply flip a switch. The machine incorporates Hydmech’s excellent hydraulic feed system with “fast approach”. The machine features full stroke hydraulic vises and hardened replaceable table wear plates. OPTIONS:• Digital angle display (V-18 only)• Hand powered drag chain chip conveyor (V-18 only)• 6° cant head (V-18 and V-18-APC only)• Hydraulic ‘pop-up’ lift rollers (V-18 and V-25 only)• Tall ‘square vise inserts’ (not available on VW-18II-APC)• Hydraulic chip conveyor (V-18, V-18-APC and V-25 only)• Chip bucket (not available on VW-18II-APC)• Extended head (V-18-APC only)• Hydraulic overhead bundling• Mist lubrication• Variable vise pressure• Outfeed vise (V-18-APC and V-25-APC only)• Workstop (VW-18II only)See next page forspecifications and pricing.
V SERIES
Larger machines available. Contact your local Thomas Skinner Machine Tools Salesperson for details and pricing.
V-18 Manual BandsawAll Hydmech Machines are F.O.B. Woodstock, ON
MODEL
M-16-A Automatic Band
Saw
M-20-A Automatic Band
Saw
Capacity
90o rectangular 16 x 25” 20 x 30”90o round 16” dia 20” dia
60o rectangular 9 x 16” 12 x 20”60o round 11” 14”
45o rectangular 15 x 16” 19 x 20”45o round 16” 20”
Blade sizeLength 18’ 6” 20’ 6”Width 1.25” 1.50”
Thickness .042” .050”Blade speed 50 - 350 SFM (variable)
Blade wheel diameter 19” 22”
MotorsBlade 7.5 HP 10 HP
Hydraulic 3 HPMachine weight 7,400 lbs 7,700 lbsOverall dimensions (W x L x H)
132 x 90 x 66” 140 x 90 x 66”
Vise control HydraulicTable height 32”Maximum workload 8,000 lbsORDER # HYD-M16A HYD-M20AMSRP PRICE $61,500 $69,900
MACHINE TOOLS
237
FULLY AUTOMATIC VERTICALV-18-APC & V-25-APC STANDARD FEATURES:• 10 HP variable frequency drive (V-18-APC, V-25-APC)• 40" single stroke multi index capability shuttle (V-18-APC)• 6° canted head (V-25-APC)• 60° two way miter capacity (V-25-APC)• 7.5 HP motor with AC inverter (V-18-APC)• Programmable guide arm positioning (V-25-APC)• Blade breakage switch• Carbide guides• Direct down feed providing easy adjustment of both
head feed rate and cutting pressure• Drag chain chip conveyor (V-18-APC)• Flood coolant system (V-18-APC)• Full stroke hydraulic vises (V-18-APC, V-25-APC)• Head movement along linear bearings• Heavy duty upper and lower band wheel• Hydraulic blade tensioning• Hydraulic chip conveyor (V-25-APC)• Hydraulic head swing and head brake (V-25-APC)• Hydraulic head swing, advance/retract (V-18-APC)• Laser light• Non-driven pop up
feed roller (V-25-APC)
• Out of stock switch• Overhead bundling
(V-18-APC)• PLC 500
programmable miter and shuttle control (V-25-APC)
• PLC control (V-18-APC)
• Powered blade brush
V-APC SERIESBAND SAWS
V-25-APCAutomatic Band saw
• Revolutionary 60" infeed system (V-25-APC)
• Wash down hose• Work light
OPTIONS:• 10’ shuttle infeed (V-25-APC)• Chip bucket• Conveyor bridge (V-25-APC)• Extended head (V-18-APC)• Fixed 6 degree canted head (V-18-APC)• Hydraulic chip conveyor (V-18-APC)• Hydraulic overhead bundling• Idler & powered conveyors• Mist lubrication• Out feed vise• Right side shuttle infeed (V-25-APC)• Variable vise pressure• “Tall square” vise insert
V-18-APCAutomatic Band Saw
* Extended head optiont With 6o cant option
All Hydmech Machines are F.O.B. Woodstock, ON
MODEL VW-18II Band Saw V-18 Band SawV-18-APC Automatic
Band Saw V-25 Band SawV-25-APC Automatic
Band Saw
Capacity
90º rectangular 18 x 22”18 x 31” 18 x 20” (18 x 31”*) 30 x 25”18 x 28”t 18 x 28”*t -
- 18” x 18”t -90º round 17.5” 17.5” 25”
45º rectangular 18 x 15”18 x 21” 18 x 13” (18 x 21”*) 21 x 25”
- 18 x 19”*t -- 18 x 12”t -
45º round 12.5” 17.5” 13” (17.5”*) 21”60º rectangular 18 x 10-1/4” - - -
60º round 10-1/4” - - 14.5”90º rectangular w/
bundling- 18 x 12” option
18 x 12” (18 x 10”*t) in feed standard
--
45º rectangular w/bundling
- 18 x 6” option 18 x 6” in feed standard --
Blade size Length 16’ 3” 16’ 11” 14’ 11” (16’ 11”*) 21’ 6.5” 21’ 0.5”Width 1-1/4” 1-1/4” 1-1/4” 1-1/2” 1-1/2”
Blade speed (variable) 65 - 385 SFM 65 - 385 SFM 65 - 385 SFM 75 - 350 SFM 75 - 350 SFM
Blade wheel diameter 19” 19” 19” 24 & 32”
MotorsBlade 5 HP VFD 7-1/2 HP 10 HP
Hydraulic 1/2 HP VFD 2 HP 3 HPMachine weight (lbs) 2,700 4,500 7,500 9,300 15,000Overall dimensions (W x L x H)
36 x 94.5 x 96” 80 x 120 x 97” 120 x 143 x 97” 97 x 152 x 123” 157.5 x 254 x 123”
Vise control Hydraulic full strokeTable height 36-1/2” 38” 44”
ORDER # VW-18II V-18 V-18APC HYD-V-25 V-25APCMSRP PRICE $32,900 $53,900 $89,000 $79,900 $128,000
MACHINE TOOLS
238
HA SERIESBAND SAWS
HA250W
HFA SERIESNC CONTROLLED HORIZONTAL FULL AUTOMATIC• HFA Series automatically cuts multiple workpieces to various cut length patterns• Offers all of the same features and benefits of the HA series with the added features listed below.STANDARD FEATURES:• Integrated console• PF valve• Availability of wide blades(optional).
Selecting a wider blade can further increase cutting speed.Pressure Flow Valve• The independent pressure and flow controls in series ensure
the optimum cutting rate can be obtained regardless of section or alloy being cut
HORIZONTAL AUTOMATIC • The material feed function is automated• The NC-controlled cutting function allows for automatic flexible cutting• The HA Series is capable of automatically cutting multiple workpieces from material to a single length
HA400WSTANDARD FEATURES:• 2 way-opening vise• 9 times multi index• Blade brake limit switch• Chip conveyor• Motion detector• Out of material switch• Piece counter• Pressure flow valve• Variable blade speedOPTIONS:• Return conveyor (manual)• Roller table 6.5’• Roller table 10’• Vertical clamps• Vise pressure control
HFA400W
Full Stroke Vises• The work holding and index vise cylinders are both full stroke which
eliminates the manual setting of the clamping jaw for the work width
HA250W STANDARD FEATURES:• 9 times multi index• Chip conveyor• Diagnostic lights• Variable blade speed drive• Index floating vise• Kerf compensating dial• Motion detector• Piece counter• Pressure flow valve• Split vise• Zero clamp viseOPTIONS:• Roller table 6.5’• Roller table 10’• Vertical clamps• Vise pressure control
MODEL HA250W HFA250W HA400W HFA400W
Cutting capacity Round dia 0.5 - 10” 0.5 - 16” Rectangle (W x H) 12 x 10” 16 x 16”
Work load capacity 3,307 lbs 5,511 lbs
Work feed Feed stroke 15.75” (max 9 times index) 15.75” 19.6” (max 9 times index) 19.6”Feed length 0.394 - 141.7” 0.39 - 999.999” 0.394 - 177” 0.394 - 999.99”
Saw bladeBlade size (L x T x W) 1-1/4 x 11’6 x 0.042” 1-1/2 x 15’ x 0.050”
Blade speed 89-295 ft./min, 60 Hz stepless 50-295 ft./min, 60 Hz stepless
MotorSaw blade motor 5 HP (3.7 kW) 8 HP (5.5 kW)Hydraulic pump motor 1 HP (0.75 kW) 2 HP (1.5kW)Cutting fluid pump motor 0.24 HP (0.18 kW) 0.24 HP (0.18 kW)
Machine dimensions (W x H x L)
Head up position 78.6 x 88.8 x 74.0” 76.9 x 93.3 x 69.8” 95.5 x 106.3 x 95.5”Head down position 78.6 x 88.8 x 54.3” 76.9 x 93.3 x 50.6” 90 x 106.3 x 62.4”
Table height (above floor) 27.6” 27.6” 31.5” 31.5”Machine weight (lbs) 3,087 3,307 4,851PRICE USD $29,000 $36,350 $48,500 $59,200
All Amada Machines are F.O.B. City of Industry, CA
MACHINE TOOLS
239
PCSAW SERIES
BAND SAWS
PULSE CUTTINGVibration has always been an inherent and unwanted characteristic of metal sawing, a trait that machine and blade manufacturers have been working to mitigate for over 50 years. Compounding the challenge is the need in today’s market for cutting harder, larger-sized materials. With the conventional metal sawing method, high cutting rates were synonymous with decreased blade life and increased vibration and noise. Amada addressed this challenge and developed Pulse Cutting Technology as a solution to these problems.
PCSAW430X/AX & PCSAW530X/AXSTANDARD FEATURES:• 3D automatic adjusting wire brush• Blade deviation monitor• Blade speed controlled by inverter• Cutting feed controlled by Servo motor
(430AX/530AX)• Cutting feed controlled by hydraulic pressure-
flow control valve (430X 530X)• Cutting fluid level detector• Motion detector• Large area chip conveyor• Windows based CNC controls• Work end detect detector
PCSAW700XSTANDARD FEATURES:• Automatic adjusting wire brush• Automatically positioned guide arm• Blade deviation monitor• Blade speed controlled by inverter and
pulse motor• Chip conveyor• CNC controls
PCSAW720 ALSO AVAILABLE - CALL FOR DETAILS!
PCSAW330STANDARD FEATURES:• 99 station NC backgauge• AC inverter speed change• Auto initial material position• Auto trim cut• Blade deviation monitor• Chip conveyor• Full stroke vise• Hydraulic blade tension• Motion detector• Quick approach• Split front vise
For complete product & pricing information on the available options for the PCSAW Series, please contact your local Thomas Skinner Machine Tools Representative.
• Full stroke vises• Hydraulic blade tensioning• Motion detector• Programmable operation by CNC• Piece counter• Wheel cover limit switch
MODEL PCSAW330 PCSAW430X PCSAW430AX PCSAW530X PCSAW530AX PCSAW700
Cutting capacity Round dia 1.18 - 13” 1.18 - 16.93” 1.18 - 20.87” 28”Rectangle (W x H) 13 x 13” 16.93 x 16.93” 20.87 x 20.87” 31.5 x 28”
Work load 4,410 lbs 6,613 lbs 10,141 lbs 26,400 lbs
Saw bladeDimensions (L x T x W) 1.5 x 13.6 x 0.035” 2 x 20 x 0.063” 22’ 11 x 0.063 x 2-.625” 27.3 x 0.063 x 2.625”Blade speed 49 - 394 ft/min, inverter 49 - 261 ft/min, inverterTension control Hydraulic
Blade control
Top limit setting Auto setting w/quick approach feeler Auto setting
Cutting controlHydraulic pressure
control & flow-control valves
Windows CNC, hydraulic pressure-flow control valve
Windows CNC, servo motor w/ball
screw
Windows CNC, hydraulic pressure-flow control valve
Windows CNC, servo motor w/ball
screwCNC w/pulse control
Vise Operations Type Split vise Front & rear viseControl Hydraulic full-stroke cylinder
Motor
Saw blade motor 5 HP 15 HP 20 HP 25 HP pulse controlledHydraulic pump motor 2 HP 3 HP 5 HPPulse cutting motor .25 HPCutting fluid pump motor .25 HP .5 HPSaw head motor - .75 HP -
Machine dim. (W x H x L)
Head up position 85.6 x 99.6 x 74.4” 112.2 x 83.2 x 90.0” 127.6 x 83.2 x 102.4” 185.1 x 96.9 x 112.6”Head down position
Table height (above floor) 27.6” 31.5” 27.6”Machine weight (lbs) 3,970 10,361 12,125 22,046PRICE USD $82,780 $167,690 $187,585 $199,175 $209,680 $334,650
All Amada Machines are F.O.B. City of Industry, CA
MACHINE TOOLS
240
METAL CUTTING CARBIDE CIRCULAR SAWS
CMB SERIESCIRCULAR SAWING MACHINE SERIES FOR BAR MATERIALThe optimal technology for realizing reductions in cycle time and high precision cutting for bar steel cutting. Circular Saw Machines - high productivity, accuracy and excellent surface finishes are only three achievements of many that will be constant when using the Amada CMB series sawing systems.STANDARD FEATURES:• Parts are cut using an oblique-slide cutting mechanism• High precision positioning to +/- 0.01mm• Unique carbide-tipped circular saw that cuts cleanly and virtually burr free• Capable of cutting a variety of metal materials including round bar, flat bar and pipe in a range
of materials like mild steel, stainless steels, tools steels and nonferrous materials• Semi-dry cut system that uses eco-friendly oil mist thus work pieces get less wet while cutting; resulting in
simplified downstream processes• Makes highly precise cuts resulting in
the cut-face being very clean• Oblique-slide cutting mechanism and
cermet carbide pads results in much greater service life of the circular blades and noticeably reducing the costs/cut
CM400 high quality, high speed, low cost for pipes and bars also available - call for complete details.
For complete product & pricing information on other Amada models,
please contact your local Thomas Skinner Machine Tools Representative.
MODEL CMB75CNC CMB100CNC CMB150CNC
Cutting capacity Round dia 0.6 - 3.0” 0.98 - 3.94” 2.95 - 5.9”Rectangle (W x H) 0.6 x 0.6 - 2.6 x 2.6” 0.98 x 0.98 - 2.95 x 2.95” 2.95 x 2.95 - 3.94 x 3.94”
Max stock table loading capacity (L x D) 18’ x 3” 19.7’ x 3.94” 19.7’ x 5.9”Incline table dimensions (L x W) 17’ x 39” 17.9’ x 61.9” 17’ x 55.9”
Saw bladeBlade speed 50-160 RPM, by Inverter 56-210 RPM, by Inverter 50-115 RPM, by InverterNumber of teeth 60 or 80 60, 80 or 100 40 or 60OD x bore x T 11.2 x 1.57 x 0.8” 14.1 x 1.57 x 0.10” 18.1 x 1.97 x 0.11”
Saw head feed drive Hydraulic Servo motor c/w ball screw
MotorSaw blade motor 10 HP 15 HP 20 HPHydraulic pump motor 3 HP 2 HPCut-to-length feed motor 1/2 HP, Servo Motor 1 HP, Servo Motor 3/4 HP, Servo Motor
Material index Stroke 0.2 - 23.6” 0.2 - 28.1” 0.2 - 29.7”Hydraulic Tank capacity 8 gal 5.3 galMachine dimensions (W x L x H) 70 x 67 x 58” 79.4 x 80.1 x 73.7” 82.9 x 82.7 x 78”Machine weight (lbs) 3,750 5,511 7,275PRICE USD $130,965 $156,500 $225,510
All Amada Machines are F.O.B. City of Industry, CA
Can’t find a model you are looking
for? Call 1-800-567-2131 and ask to speak
to a Machine Tool Sales
Representative.
MACHINE TOOLS
241
MODEL I-28 (M)FEATURES:• Drill head is adjustable 360° around the column and can be raised and lowered• Helical gears combined with steel gears against reinforced fiber gears in the main gear box ensure higher
operating efficiency, a more powerful drive and smooth operation• Noise level and maintenance of the gear box is reduced to a minimum• When the set drill depth is reached, the spindle will automatically return to the starting point• Feed gear box is provided with an automatic overload protection device (power feed machines only (M))• Table is made from high quality cast iron, complete with T-slots and coolant channel - 400 x 500mm• Spindle is mounted in ball and roller bearings and the lower spindle roller bearing is placed as near to the
lower part of the spindle as possible, ensuring greater precision and stability• Built-in tool ejector for rapid tool exchange and extended spindle bearing lifeFACTORY OPTIONS SPECIAL ORDER ON REQUEST.
GEARED HEADHIGH END DRILLING MACHINES MADE IN SWEDEN
MODEL I-45MFEATURES:• The drill head is fixed and is available with or without automatic spindle feed.• Helical gears combined with steel gears against reinforced fiber gears in the main gear box ensure higher
operating efficiency, a more powerful drive and smooth operation• Noise level and maintenance of the gear box is reduced to a minimum• Power feed is provided with an automatic overload protection device• When the set drill depth is reached, the spindle will automatically return to the starting point• Machine is fitted with a fixed table 500 x 400mm as standard• Spindle is mounted in ball and roller bearings and the lower spindle roller bearing is placed as near to the
lower part of the spindle as possible, ensuring greater precision and stability• Column is constructed of steel ensuring extra rigidity of the machine• Machine is equipped with thermal overload switch, no-volt release and emergency stopFACTORY OPTIONS SPECIAL ORDER ON REQUEST.
I-45M
Drill guard not included
I-28M
Drill guard not included
I-28
Drill guard not included
Can’t find a model you are looking for? Call 1-800-567-2131 and ask to speak to a
Machine Tool Sales Representative.
MODEL I-28 I-28 I-28M I-45MDrilling capacity in cast iron 1-3/16” 1-3/4”Drilling capacity in steel 1-3/32” 1-5/8”Automatic feed - - .004, .006, .012” .004, .006, .01, .013”Spindle speeds (RPM) 130 - 3,480 108 - 1,800
Motor1.4 HP/1.85 HP
230V, 3-Ph, 60 Hz1.4 HP/1.85 HP
575V, 3-Ph, 60 Hz1.4 HP/1.85 HP 230V,
3-Ph, 60 Hz3 HP, 230V, 3-Ph,
60 HzSpindle taper 3MT 4MTMax distance spindle to table 36” 32.67”Weight (lbs) 400 433 688ORDER # IMA-I28220V IMA-I28575V IMA-I28M220V I45M220VPRICE $4,395 $4,395 $6,395 $11,495
MACHINE TOOLS
242
FEATURES:• Hardened and ground nickel chrome gears• Arm elevating motor• Feed depth indicator for spindle• 24V control voltage• Spindle is counter-balanced with an adjustable spring• Upper and lower safety limit switches• Hardened and ground spindle with precision bearings• Manual clamping of column, arm and drill on KMR-1100S• Hydraulic clamping of column, arm and drill head on KMR-1250DH and KMR-1600DH for
maximum rigidity
ADDITIONAL FEATURES OF KMR-1600DH:• Clutch driven main spindle for smooth starting and stopping• Spindle speeds can be preselected for the next operation, increasing speed and efficiency• Feed overload safety device prevents damage• Auto tool ejector button for longer spindle bearing life
STANDARD EQUIPMENT ON ALL MODELS:• Box table• Complete coolant system• Work lamp• Manuals and service tools
KMR SERIESRADIAL DRILLS
Contact your local Thomas Skinner Machine Salesperson for details.
MODEL KMR-700S KMR-1100S KMR-1600DHOperation ManualColumn dia 7-7/8” 11-13/16” 15-3/8”Distance between spindle centre & column face
(max) 28” 43-5/16” 63”(min) 7-15/32” 14” 14-9/16”
Spindle head longitudinal travel 20-1/2” 29-3/4” 48-1/2”Distance of spindle to base surface
(max) 42” 50” 62”(min) 12-5/8” 13-9/16” 17-1/8”
Vertical arm travel 21-1/16” 27-9/16” 32-7/8”Work area of base 35-5/32 x 24-13/16” 49-5/8 x 29-7/8” 64-11/16 x 36-5/8”Box table dimensions (W x L x H) 16 x 21 x 16” 20 x 30 x 16”Morse taper spindle 4MTSpindle travel 8-1/4” 8-5/8”Spindle speed ranges (6) 88 - 1,500 RPM (9) 49 - 1,524 RPMSpindle feed ranges .003 - .0052 - .009 (3) .003-.0137 (3)Motor for main spindle 2 HP/220V/3-Ph/60 Hz 3 HP/220V/3-Ph/60 Hz 7.5 HP/220V/3-Ph/60 HzMotor for arm elevating 1 HP 2 HPMotor for clamping device ManualHeight of column 77-1/2” 83” 117-3/4”Measurement (L x W x H) 55 x 31 x 77” 81 x 41 x 93” 108 x 46 x 117”Working capacity in drilling steel 1-1/2” 1-3/4” 2-1/4”Working capacity in cast iron 2” 2-1/4” 2-5/8”Working capacity in boring steel 2-3/4” 4” 5”Working capacity in cast iron 4-1/8” 6” 7-3/8”Working capacity in tapping steel 5/8” 1”Working capacity in cast iron 7/8” 1-1/2”Net weight (lbs) 2,557 5,235 10,557ORDER # KAO-KMR700DS KAO-KMR1100S KAO-KMR1600DHPRICE $14,995 $25,995 $47,795
MACHINE TOOLS
243
TURRETFEATURES:• The quality is in the details• Inner taper of spindle unit is induction hardened and precision
ground to ensure durability• Dynamically balanced motor shaft, vari-drive pulleys• Genuine mehanite castings for high quality and uniform structure• The underside of the saddle is hand scraped and with oil grooves giving
maximum lubrication and oil retention• One shot simple and reliable lubrication system• Table and saddle are mounted with thrust
bearings that pre-load the feed screws, eliminating end play
OPTIONAL ACCESSORIES:• Power drawbar • Servo power feed systems x, y, z • 4" riser blocks• Digimatic quill kit • Chip tray* Installation extra
ALL FIRST MACHINES ARE MADE IN A WORLD CLASS MANUFACTURING FACILITY• Air conditioned facility and ISO 9001 certified ensures the stability of
quality mass productions• Fully computerized network station offers an efficient production line
and great service
MODEL LC 1-1/2VSLMILLING MACHINES
Machine includes a Mitutoyo KA 3-axis
DRO installed!
VERTICALFEATURES:• Dynamically balanced motor shaft, vari-drive pulleys• Extra lubrication design between quill and housing• One piece quill pinion and shaft• Quill and housing are selectively fitted• Meehanite castings for high quality and uniform structure• 25-1/2" extra wide saddle• Unique double nut and anti-backlash design ensures accuracy and
ease of adjustment• Spindle is made of 1-piece Ni-Cr alloy steel• Spindle is mounted on 2 angular contact bearings
and 1 ball bearing for maximum rigidity• Table and saddle are mounted with thrust
bearings that preload the feed screws, eliminating end play
• Rigid square ways on Y-axis are hardened and ground with Turcite-B coating on both sides of saddle
• X, Y, leadscrews have special coating treatment
OPTIONAL EQUIPMENT:• 4" riser block• Servo power feed system x,y,z• Chip tray• Power drawbar• Digimatic quill kit
MODEL LC-185VS
Shown with optional chip tray
Shown with optional chip tray
Machine includes a Mitutoyo KA 3-axis
DRO installed!
Table size 50 x 9”Longitudinal travel 36”Cross travel 12”Vertical travel (knee) 16”Vertical spindle motor 3 HP, 220V, 3-Ph, 60 HzSpindle speeds (60 Hz) 60 - 4,500RPM (variable speed)Spindle taper R8Quill travel 5”Vertical feeds (per revolution of spindle) .0015, .003, .006Head swivel/tilt (R & L - 90°) (F & B - 45o-38°)Overarm travel 12”Overarm swivel 360°Spindle nose to table 0 - 18-1/2”Spindle centreline to column surface 6-3/4 - 18-3/4”Shipping dimensions (W x D x H) 60 x 60 x 72”Weight (lbs) (approx) 2,222ORDER # 3-axis LON-LC112VSLPRICE with Mitutoyo KA 2-Axis DRO installed
$13,995
Table size 50 x 10”Longitudinal travel 31”Cross travel 16.3”Vertical travel (knee) 15.3”Vertical spindle motor 3 HP, 220V, 3-Ph, 60 HzSpindle speeds 60 - 4,500 RPM (variable speeds)Spindle taper R8Quill travel 5”Vertical feeds (per revolution of spindle) .0015, .003, .006Head swivel/tilt (R & L - 90°) (F & B - 45°)Overarm travel 18.5”Overarm swivel 360°Spindle nose to table 5.31 - 20.7”Spindle centreline to column surface 9.6 - 21.8”Weight (lbs) (approx) 2,750Shipping dimensions (W x D x H) 66 x 64 x 70”ORDER # 3-axis LON-LC185VSPRICE with Mitutoyo KA 2-Axis DRO installed
$17,795
MACHINE TOOLS
244
LC-20 SERIESHEAVY DUTY MILLING MACHINES
LC-20VSG
LC-20VHS
ACCURATE, PRECISE, DURABLE, TROUBLE FREEThe First LC-20 heavy duty vertical turret mill is built to be the best vertical mill in the industry. Accurate, precise, durable, trouble free. It’s manufactured from superior materials using state of the art equipment like Okuma 5-sided machining centres. First mills have a solid 35 year reputation for quality, precision, reliability and service. Take a closer look at the LC-20 Series, you’ll find First means enduring quality.FEATURES:• Turcite-B coated ways• Centre mounted crossfeed screw• Nickel-chrome spindles• Super precision three bearing support• Enlarged turret clamping surfaces• Backlash adjustment on X- and Y-axis• Heavy duty variable speed head• Unique 8 T-bolt tilt head locking
OPTIONAL EQUIPMENT:• Y-axis Servo
power feed*• Digimatic quill kit* Installation extra
STANDARD EQUIPMENT:• Mitutoyo KA 3 -Axis DRO• Complete coolant system• Coolant tray• Halogen worklight• One shot lubrication system• Box way design for heavy duty work• Power feed and rapid on longitudinal travel• Power rapid travel on knee• Power drawbar standard on vertical spindle• Pendant control panel• 2-speed spindle motor• Turcite coated ways for wear resistance
Machine includes a Mitutoyo KA 3-axis
DRO installed!
MODEL LC-20VSG Vertical LC-20VHS Vertical/HorizontalTable size 56 x 10"Longitudinal travel (manual max) 36.2"Cross travel 16.3"Vertical travel (knee)(manual max) 18"Longitudinal feeds .8 - 27.2"/minLongitudinal rapid feeds 82.7"/minVertical feeds (knee) 31.5"/minVertical spindle motor 5 HP, 220V, 3-Ph, 60 HzHorizontal spindle motor - 5 HP, 220V, 3-Ph, 60 HzTable longitudinal feed 1 HPVertical feeds 1.5 HPCoolant pump 1/8 HPVertical main spindleSpindle speeds variable 60 - 4,500 RPMSpindle taper ISA 40 INTQuill travel 5"Vertical feeds .0016, .0031, .0063/revHead swivel/tilt (R & L - 90°)(F & B - 45°)Overarm travel 18.5"Overarm swivel 360°Spindle nose to table 3.1 - 21.3" 4.5 - 21.7"Spindle centreline to column surface 14 - 32.5"Horizontal main spindleSpindle speeds - (6) 55 - 1,180 RPMSpindle taper - ISA 40 INTSpindle centreline to table surface - -1 to +16.1"Spindle centreline to overarm underside - 5.7"Spindle nose to column surface - 1.1"Weight (lbs) 3,960 4,422Shipping dimensions (W x D x H) 74.8 x 83.1 x 73"ORDER # LON-LC20VSG LON-LC20VHSPRICE with Mitutoyo KA 3-Axis DRO installed $25,495 $32,795
MACHINE TOOLS
245
VERTICAL & HORIZONTALFEATURES:
MODEL CS-G450BMILLING MACHINES
Many more models are available.
• Extra wide 2-axis ways for precision without deflection• 3-axis power feed and rapid traverse table• Electromagnetic spindle brake• Auto central lube system• Handwheel on saddle for table travel• Complete coolant system including chip tray• Turret type milling head• Backlash elimination on table travel allows for climb milling• Variable speed vertical spindle
• Headstock gears and shafts are precision ground, hardened chrome moly• “Joystick” controls instant spindle reverse for tapping• Vertical quill is chromed 115mm dia and individually fitted to each
quill housing)• Power drawbar• Mitutoyo 3-axis DROOPTIONAL:• Digimatic quill kit
Table size 59 x 12"Longitudinal travel 41.3"Cross travel 12.6"Vertical travel 18.5"Horizontal spindle motor 7.5 HPVertical spindle motor 5 HPTable longitudinal, cross & vertical feed motor 3 HPCoolant pump motor 1/8 HPMax height 100"Floor space 26.5 x 47.25"Shipping dimensions (W x D x H) 59 x 60 x 80"Vertical spindleSpindle speeds (at 60 Hz) 120 - 3,600 RPM (variable speed)Quill travel 5.1"Quill feeds (3 steps) "/rev .002, .0038, .0075Taper ISO 40Swivelling angle of spindle head (R & L) 45o
Cross travel ram 20"Horizontal rotating angle of ram 360o
Distance of spindle end to table top 5.1 - 23.6"Distance of spindle centre to column surface 3.94 - 24"Horizontal main spindleSpindle speeds (12 steps) (at 60 Hz) 45 - 1,700 RPMTaper of spindle nose ISO 40Distance of spindle centre to table top .875 - 19.4"Distance of spindle centre to overarm bottom 7.16"Net weight (lbs) 5,975ORDER # CHU-CSG450BPRICE $54,395
Can’t find a model you are looking for? Call 1-800-567-2131
and ask to speak to a Machine Tool Sales Representative.
MACHINE TOOLS
246
HEAVY-DUTY BED TYPE VERTICAL BORING & MILLING MACHINESFEATURES:
MODELS CS-VBM-4V & CS-VBM-5VLBORING & MILLING MACHINES
Also available from Fortworth... CS-VBM-8V (with 80" table travel) CS-VBM-5VHL
(with vertical and horizontal spindles).
Call your local Thomas Skinner Machine Tools Salesperson for more information and pricing.
• These heavy duty bed mills offer high rigidity with the bed transmission slung low between the wide Y-axis ways
• The extra high precision head and spindle are assembled in a “clean room” for smooth, long lasting accuracy
• Hand scraped way surfaces• Heavy duty box ways• High quality ribbed castings• Automatic central lube system• Pendant control• Chrome moly hardened and ground gears• Extremely rigid bedway construction• Hydraulic head clamping (4V and 5V)• Power drawbar• Coolant system• All controls are centralized for operator’s convenience• Ball screws are available on request
CS-VBM-5VL ADDITIONAL FEATURES:• Hydraulic table clamping• Variable inverter feed control• Mitutoyo 3-Axis DROCOMMON OPTIONS:• Large machine vises• ISO 50 spindle tooling• Large dividing heads
CS-VBM-4V
MODEL CS-VBM-4V CS-VBM-5VLCapacityTable travel(longitudinal) 47-1/4" 59"Table travel (cross) 17-11/16" 23-5/8"Vertical spindle head travel (vertical) 21-5/8" 27-9/16"Vertical spindle nose to table top 3-15/16 ~ 25-5/8" 3-15/16 ~ 31-1/2"Vertical spindle centre to column front 17-11/16" 21-5/8"TableTable working area 74-13/16 x 17-11/16 86-5/8" x 19-11/16"T-Slot(wide x no. x pitch) .709 x 5 x 3-1/8" .709 x 5 x 3-9/16"Table top to floor 33-1/2" 33-7/8"Spindle headSpindle nose ISO No.50Vertical spindle speeds 45 - 1,500 RPM# of vertical spindle speeds 12 stepsFeeds (vertical spindle) .002 - .008 IPRFeedRapid traverse (longitudinal & cross) 113-3/8 IPM 129-7/8 IPMFeed rates (longitudinal & cross) 1-1/8 ~ 34-7/16 IPM 1-1/8 ~ 39-3/8 IPMChange of feed 12 steps infinitely variableMotorsVertical spindle 10 HP/220V/3-PH/60 Hz 15 HP/220V/3-PH/60 HzFeed 2 HPMachine sizeMachine height 102" 113"Floor space (longitudinal x cross) 150 X 87" 175 X 100"Net weight (lbs) (approx) 11,440 15,400Shipping dimensions (W x D x H) 75 x 70 x 92" 86 x 100 x 98"ORDER # CSVBM4V CHU-CSVBM5VLPRICE UPON REQUEST $96,595
MACHINE TOOLS
247
CH-530X1700
FEATURES:• 7-1/2 HP motor• Gap/bed hardened and ground• D1-6 camlock spindle• Multiple feed stop bar• Force fed lubrication to headstock feed
gear box and carriage• Foot brake• Spindle 3 point support• Cross slide is hardened and ground• Inch/metric threading without using change gears• Overload protection on apron to prevent damageSTANDARD EQUIPMENT:• 2-axis Mitutoyo DRO• Multifix “B” toolpost• Taper attachment• Bison 8" 3-jaw chuck (D1-6) on
CH-400• Bison 10" 3-jaw chuck (D1-8)
on CH530• Bison 10" 4-jaw chuck (D1-6)
on CH-400• Bison 12" 4-jaw chuck (D1-8)
on CH530• Complete coolant system• Steady rest• Multi-position length stop• Centre sleeve 6MT x 4MT• 4MT dead centre (1 pc carbide)
(1 pc carbon)• 7" drive plate• Service kit• Splash guardOPTIONAL EQUIPMENT:• 14" face plate D1-6• 3.54" follow rest• Micrometer carriage stop• 4MT live centre
CH SERIESHIGH SPEED PRECISION LATHES
MODEL CH-400X800 CH-400X1100 CH-530X1700CapacitySwing over bed 16" 21"Swing over cross side 9.5" 14.5"Swing in gap 22.25" 28"Gap width in front of face plate 6"Distance between centres 31.5" 44" 67"Width of bed 12"Length of bed 49" 61" 84"Total travel of compound 5.9" 6"Total travel of cross slide 10.5"Height of centre from leg bottom 42.375" 44.375"HeadstockSpindle bore 2" 3.00"Taper of spindle bore & centre 6MT x 4MTType of spindle nose D1-6 D1-8Number of spindle speeds 16 12Range of spindle speeds 33 - 1,800 RPM 29 - 1,650 RPMThreads & feedsNumber of feeds 16Range of longitudinal feeds .0028" - .020" .0012" - .039"Range of cross feeds 1/2 of longitudinal feedsLead screw diameter & pitch 1-3/8 - 4 TPIRange of inch threads 4-42 TPI (36 kinds) 2-72 TPI (44 kinds)Range of metric pitches .4 - 7.0mm (36 kinds) .2 - 14mm (39 kinds)TailstockTotal travel of tailstock quill 6"Tailstock quill diameter 2.375"Taper in tailstock quill 4MTMotorsSpindle drive motor 7-1/2 HP/220V/3-Ph/60 HzCoolant pump motor 1/8 HPMachine dimensionsSpace required (L x W x H) 79 x 39 x 55" 90 x 39 x 55" 114 x 39 x 55"Shipping dimensions (L x W x H) 79 x 41 x 59" 90 x 41 x 59" 116 x 41 x 59"Net weight (lbs) (approx) 3,197 3,400 3,958ORDER # CH400800T CHI-CH4001100T CHI-CH5301700TPRICE $25,995 $27,195 $32,195
MACHINE TOOLS
248
CHD-560X2300
FEATURES:• 15 HP motor• 4-1/8" spindle bore• Spindle is supported by 3 P-grade taper roller bearings• Headstock gears are precision ground chrome
molybdenum• Rapid traverse (longitudinal)STANDARD EQUIPMENT:• 2-axis Mitutoyo DRO• Multifix “C” toolpost• Taper attachment• Bison 12" 3-jaw chuck (D1-11)• Bison 16" 3-jaw chuck (D1-11)• Complete coolant system• 10" roller steady rest• 2-speed tailstock (1:1 and 5:1 ratio)• Full length rear splash guard• Multi-position length stop• Centre sleeve 7MT x 5MT• 5MT dead centre (1 pc carbide) (1 pc carbon)• 12" drive plate• Service kitOPTIONAL EQUIPMENT:• 16" dia 3-jaw chuck D1-11• 20" dia 4-jaw chuck D1-11• Follow rest• Micro carriage stop• 7.5" - 16" roller steady rest• 5MT live centre
CHD SERIESMID-SIZE PRECISION LATHES
MODEL CHD-560X2300 CHD-660X3000CapacitySwing over bed 22" 26"Swing over cross slide 13-3/8" 17-1/2"Swing in gap 31-3/8" 35"Gap width in front of face plate 10-5/8"Distance between centres 90-2/3" 118"Width of bed 15-3/4"Total travel of compound 9-1/2"Total travel of cross slide 15-3/4"Height of centre from leg bottom 44-1/2" 46-3/4"HeadstockSpindle bore 4-1/8"Taper of spindle bore & centre 7MT x 5MTType of spindle nose D1-11Number of spindle speeds 12Range of spindle speeds 13 - 1,200 RPMThreads & feedsNumber of feeds 32Range of longitudinal feeds .0012-.039"Range of cross feeds 1/2 of longitudinal feedsLead screw diameter & pitch 1-3/4 - 4 TPIRange of inch threads 2-72 TPI (44 kinds)Range of metric pitches 0.2"-14" (39 kinds) TailstockTotal travel of tailstock quill 7"Tailstock quill diameter 3"Taper in tailstock quill 5MTMotorsSpindle drive motor 15 HP/220V/3-PH/60 HzCoolant pump motor 1/8 HPMachine dimensionsSpace required (L x W x H) 145 x 47-1/4 x 59" 174 x 47-1/4 x 59"Shipping dimensions (L x W x H) 148 x 50 x 62" 180 x 50 x 62"Net weight (lbs) (approx) 6,200 7,000ORDER # CHD5602300T CHI-CHD6603000TPRICE $52,795 $57,695
Can’t find a model you are looking for? Call
1-800-567-2131 and ask to speak to a Machine Tool
Sales Representative.