MANUAL ENG - cunill.com · USER MANUAL. GRUESO COARSE FINO FINE 15'' to 20'' (very coarse grinding)...
1
_Chronometer _Access to the menu _Continuous coffee _Screen selection 2 Coffees _Increase of the grinding time _Menu selection _1 Coffee _Reduction of the grinding time _Menu selection 1 2 3 4 1 2 3 4 START-UP OF THE GRINDER: Connect the grinder to the network and turn it on by pressing the main switch. LANGUAGE SELECTION: To access the language selection press button No. 4 twice and then press simultaneously button No. 1 and No. 2 during 4 seconds. (LANGUAGE) (1 – BEAT – 1 COFFEE) (2-BEATS – 2 COFFEES) (COUNTER) To select the language press buttons No. 1 or No. 2 until the desired language appears. Once selected it needs no confirmation. _ 1 COFFEE: Press button No. 1 to get one dose of ground coffee. _2 COFFEES: Press button No. 2 to get two doses of ground coffee. _CONTINUOUS COFFEE: To get a customized ground coffee dose keep pressed button No. 3 until obtain the desired quantity _PROGRAMMING COFFEE: To access the programming of the grinding time for 1 or 2 coffees press button No. 4 twice and then simultaneously press button No. 1 and No. 2 for 4 seconds. Pressing button No. 3 see on the display the desired section: (LANGUAGE) (1-BEAT – 1 COFFEE) or (2-BEATS – 2 COFFEES) (COUNTER). To increase or decrease the grinding time press button No. 1 (to decrease) or No. 2 (to increase). Once selected it needs no confirmation. COFFEE COUNTER: To access the programming of the coffee counter press button No. 4 twice and then simultaneously button No. 1 and No. 2 during 4 seconds. Pressing button No. 3 select the desired section visualized on the display: (LANGUAGE) (1 – BEAT – 1 COFFEE) (2-BEATS – 2 COFFEES) (COUNTER) See on the screen the whole quantity of coffees made. Pressing buttons No. 1 and No. 2 at the same time the counter will be set to zero. Dose selection by placing the coffee holder on the wedge for filling the selected ground coffee. Once filled with ground coffee the holder is placed on the lower end of the grinder (fitting*) and the tamper is used to get a proper pressing. * The tamper can be located on the right or left according to the barista needs. ELECTRONIC LUXOMATIC 55dB USER MANUAL. GRUESO COARSE FINO FINE 15'' to 20'' (very coarse grinding) WRONG COFFEE 20'' to 25'' (fine grinding) RIGHT COFFEE 25'' to 30'' (very fine grinding) WRONG COFFEE GRINDING SETTING ACCORDING TO THE COFFEE MACHINE USED To make a perfect espresso: Press button No. 4 of the coffee grinder with one hand while pressing at the same time the button for coffee on the coffee machine. Release immediately button No. 4. Once the coffee is made press again button No. 4 to stop the chronometer and see on the display the seconds it took to make one coffee. According the table below the calibration will be modified. CARRETERA DE SANTA COLOMA, S/N APARTADO DE CORREOS Nº 18 17410 SILS-MALLORQUINES (GIRONA) SPAIN T +34 972 16 82 82 · F +34 972 85 31 04 [email protected] · www.cunill.com
Transcript of MANUAL ENG - cunill.com · USER MANUAL. GRUESO COARSE FINO FINE 15'' to 20'' (very coarse grinding)...
_Chronometer_Access to the menu
_Continuous co�ee_Screen selection
2 Co�ees_Increase of the grinding time_Menu selection
_1 Co�ee_Reduction of the grinding time_Menu selection
1 2 3 4
1 23
4
START-UP OF THE GRINDER:Connect the grinder to the network and turn it on by pressing the main switch.
LANGUAGE SELECTION: To access the language selection press button No. 4 twice and then press simultaneously button No. 1 and No. 2 during 4 seconds.(LANGUAGE) (1 – BEAT – 1 COFFEE) (2-BEATS – 2 COFFEES) (COUNTER) To select the language press buttons No. 1 or No. 2 until the desired language appears.Once selected it needs no con�rmation.
_ 1 COFFEE: Press button No. 1 to get one dose of ground co�ee. _2 COFFEES: Press button No. 2 to get two doses of ground co�ee. _CONTINUOUS COFFEE: To get a customized ground co�ee dose keep pressed button No. 3 until obtain the desired quantity _PROGRAMMING COFFEE: To access the programming of the grinding time for 1 or 2 co�ees press button No. 4 twice and then simultaneously press button No. 1 and No. 2 for 4 seconds. Pressing button No. 3 see on the display the desired section:(LANGUAGE) (1-BEAT – 1 COFFEE) or (2-BEATS – 2 COFFEES) (COUNTER).To increase or decrease the grinding time press button No. 1 (to decrease) or No. 2 (to increase).Once selected it needs no con�rmation.
COFFEE COUNTER: To access the programming of the co�ee counter press button No. 4 twice and then simultaneously button No. 1 and No. 2 during 4 seconds.Pressing button No. 3 select the desired section visualized on the display:(LANGUAGE) (1 – BEAT – 1 COFFEE) (2-BEATS – 2 COFFEES) (COUNTER)See on the screen the whole quantity of co�ees made.Pressing buttons No. 1 and No. 2 at the same time the counter will be set to zero.
Dose selection by placing the co�ee holder on the wedgefor �lling the selected ground co�ee.
Once �lled with ground co�ee the holder is placed on the lower end of the grinder (�tting*)and the tamper is used to get a proper pressing.* The tamper can be located on the right or left according to the barista needs.
ELECTRONIC LUXOMATIC 55dBUSER MANUAL.
GRUESOCOARSE
FINOFINE
15'' to 20'' (very coarse grinding) WRONG COFFEE20'' to 25'' (�ne grinding) RIGHT COFFEE25'' to 30'' (very �ne grinding) WRONG COFFEE
GRINDING SETTING ACCORDING TO THE COFFEE MACHINE USEDTo make a perfect espresso: Press button No. 4 of the co�ee grinder with one hand while pressing at the same time the button for co�ee on the co�ee machine. Release immediately button No. 4.Once the co�ee is made press again button No. 4 to stop the chronometer and see on the display the seconds it took to make one co�ee.According the table below the calibration will be modi�ed.
CARRETERA DE SANTA COLOMA, S/N APARTADO DE CORREOS Nº 1817410 SILS-MALLORQUINES (GIRONA) SPAIN T+34 972 16 82 82 · F +34 972 85 31 [email protected] · www.cunill.com
