Manual - tecway.com.t · 2 Bulb 12V 3W 1 pc 3 ... Star button: Af ter in serting the suitable coin...
Transcript of Manual - tecway.com.t · 2 Bulb 12V 3W 1 pc 3 ... Star button: Af ter in serting the suitable coin...
1
INTRODUCTION
“GO GO” is a sporty game. It will be very popular in the game
center. This game is develop according to the young people
entertainment. It owns creative and fresh outlook, easy operation,
unity of sport and fun.
FEATURES
Easy play and exciting game with funny effect.
Realistic, colorful and detailed outlook.
With mass programmed IC, stable proformance.
Ticket dispenser with high quality, is suitable for all tickets.
Coin mech with high quality, is suitable for coin with diameter
between 20mm to 30mm. Precise, stable, reliable.
2
CONTENT
1. TECHNICAL PARAMETER .......................................................................................... 3
2. INSTALLATION AND MOVEMENT ........................................................................ 5
3. CHECK, SETANDCONNECTTHE POWERINPUT .......................................... 7
4. POWER INPUT................................................................................................................. 9
5. ADJUSTMENT...................................................................................................................11
1) THE CONTEN FORGAME SETTING..............................................................11
2) ADJUST THE COIN MECH ............................................................................................14
3) ADJUST THE VOLUME ..................................................................................................15
4) ADJUST THE CONVEYER..............................................................................................15
6. TROUBLESHOOTING ...................................................................................................16
7. SCHEMATIC DIAGRAM ............................................................................................17
3
1. TECHNICAL PARAMETER
VOLTAGE: AC 220V/110V(50/60HZ)
(Note: please refer to the nameplate located on the back of the games
to check actual usage of voltage.)
MAX. CURRENT: 1.6A/3.2A
POWER:mix150W~max350W
WEIGHT: 90kg
TEMPERATURE: 5~40 。 C
LOCATION REQUIRED: indoor, no contact with any corrosive
liquid, no any greasiness and dirt.
COIN SIZE: 18~31mm (diameter)
1.2~2.5mm (thickness)
CAPACITY OF COIN BOX: 3690pcs of coins with coin size
∮25*1.5mm
DIMENSIONS: L1090×W610×H1720mm
Dimensions of Whole Cabinet:
4
Please confirm all the items below are included in one game.
1). main cabinet
2) parts shipped with the game:
NO. DRAWING NAME SPEC./MODEL QTY
1 Fuse 6.3A (large) 2 pcs
2 Bulb 12V 3W 1 pc
3 Power Cord 3phase with plug 1 pc
4 Key X919 2 pcs
5 Key X818 2 pcs
6 Manual 1 pc
Note:No future notice will be given in case of changing the
parameters of the game.we will not undertake any responbilities if
the game is modified without proper technical guidance.
OPERATION
MANUAL
5
2. INSTALLATION AND MOVEMENT
The range of installation:1215 x 2200mm
Improper Locations
!WARNING
outdoor; place directly exposed to sunshine; place explsed to rain; place with extreme high or low temperature; place with strong shake; close up danger place; velvet and not smooth floor; dirty and untidy place.
This game should be use in the room,if ues in open air,it will affect the capability and cut the game life of use.
!WARNING
Play Area
300mm
800mm
300mm
300mm
6
Install and Move:
1) The game must put on the smooth floor,adjust the foundation
down to support the whole machine, the distance of wheel and
floor should be about 5mm.
2) Adjust the foundation and put down the wheel when move the
game.
WARNING Pleaese power off the game first and pull out the cord, then move the game. Please do not carefully move, turnover, transport the game, otherwise it will destroy the game. Prevent hitting, rubbing the games when move the games, otherwise it will damage the appearance of the game. When reinstall the game, please adjust the foundation of the game and make sure the game is level.
5
Adjusting base for foundation
7
3. CHECK, SET AND CONNECT THE POWERINPUT
1) Please check whether the internal structure of game is loose
caused by transportation, and the lines tiein terminal drops out
of the port.
2) Please check whether the GND of the game is connected.
3) Please check whether the resistance of power input at the both
ends and GND is bigger than 100 million ohms.
4) Setting the game content (includes coin、ticket、game time)
5) Adjust the coin mech to check if the coin can be inserted
porperly.
6) Connect the power cord.
Descriptions:
ATTENTION:
The power cord can’t be pressed by heavy things, because it will
mangle the wire to cause short circuit, serious situation may lead to
fire.
power cord box
8
Please hold the plug to pull it out from socket. And do not hold the
cord.
Please do not use wet hand to pull out the plug directly.
Please do not stretch, twist the power cord. Do not let the power cord
close to hightemperature object. Do not kick or step on the cord.
Please use the proper voltage and fuse. .
AAAA
!W ARNING
The game must check the power input of the earth's impedance
before input the power,connecting with the power must be correct.
9
4. POWER INPUT
The voltage input should be same as fixed voltage.
1) Make sure the game’s input voltage is same as the nameplate
stated in the back of the game.
2) Turn on the switch after connecting the power.
3) Insert coin to check if the coin mech can work properly.
4) Visually inspect and comfirm the display, light and conveyer can
work properly.
5) Insert coin for a test to comfirm the control of the steering
wheel,win and ticket dispensing are proper.
6) Inspect and confirm the sound is porper.
7) Realize all parts of the game.
Appearance structure:
10
INTRODUCTION
Star button: After inserting the suitable coin into the game ,then
press this button to start game.
Ticket exit: When the game over it will come out the lottery.
Doreamon Outlook: The appearance of the game.
Display board:Display the numer of the coins.
Steering wheel: the steering wheel can control the small car
through the golden coins area when the game starts.
Coin Mech: insert the proper coin to start a game.
PLAYING INSTRUCTIONS:
1) Insert the right specs coin to the machine.
2) After inserting the coin, press the button to start a game.
3) Twisting the steering wheel to control the litter car to move
right or left,then let the car throught gold area.
4) Each passing throught the gold area can get one point.
5) Congratulation that if get more than 30 points, you can get
added big award.
!ATTENTION
Please setting the coin machine and the game's content for the first operation.
inspection for all the function, prevent the insufficiency to impact the game.
11
5. ADJUSTMENT
1) THE CONTEN FOR GAME SETTING
Be chosen the content and result by the game from the list of
the settings, dialing the location of SW1 or SW2 switchs of
mainboard (ON or OFF), to set /change the game .
DESCRIPTIONS: There are two groups switches on the mainboard,
each group with 8 litter swtiches, each switch with number symbol,
when dialing the location with ON is open, the OFF is close, please
according to the setting list to setting that can change the game’s
content.
Note:
After setting the game, please power off the game and then move the
switch, otherwise, the main board will be damaged.
12
DIP SWITCHES SETTING:
1 2 3 4 5 6 7 8
1 coin per game OFF OFF 2 coins per game ON OFF 3 coins per game OFF ON 4 coins per game ON ON
5 points OFF OFF OFF 10 points ON OFF OFF 15 points OFF ON OFF 20 points ON ON OFF 40 seconds OFF OFF OFF 55 seconds ON OFF OFF 70 seconds OFF ON OFF 85 seconds ON ON OFF
1 2 3 4 5 6 7 8
2 poins per ticket OFF OFF OFF 3 points per ticket ON OFF OFF 4 points per ticket OFF ON OFF 5 points per ticket ON ON OFF 6 points per ticket OFF OFF ON 8 points per ticket ON OFF ON 10 points per ticket OFF ON ON no ticket dispensed ON ON ON
10 tickets OFF OFF 15 tickets ON OFF 20 tickets OFF ON 25 tickets ON ON 0 ticket OFF OFF 1 ticket ON OFF 2 tickets OFF ON 3 tickets ON ON OFF OFF ON ON
main baord DIP SW1 Settings
no. of coin per game
BONUS
Game Time
background music
main board DIP SW2 setting
no. of points per ticket
Max. tickets dispensed
Min. tickets dispensed
13
STTING INTRODUCTION:
NO. of coins for one of game: This setting decides how many
coins the player should insert for one of game .If the group 1,2 of the
SW1 switch are setting OFF,it is one of coin for one of gameat this
time.
BONUS: When the player get more than 30 scores ,it can be given
BOUNS score from the machine.If the group1,2,3 of the SW1 swith
are setting OFF,at this time can get 5 score from BOUNS.
Game TIME: This settings will decide each game’s time.If the
group 6,7,8 of the SW1 switch are setting OFF,time is 40 second.
NO. of points for one ticket: This setting decides tickets NO and
no ticket.If the group 1,2,3 of the SW2 switch are setting OFF,it is 2
points for 1 ticket.
MAX ticket: This setting decides the max ticket. If the group 4,5
of the SW2 switch are setting OFF,the game comes out the max
tickets are 10.
Minimum ticket: This setting decides the minimum ticket. If the
group 6,7 of the SW2 switch are setting OFF,the game comes out the
minimum ticket is 0.
BACKGROUND MUSIC: This setting determines whether the
game will play the backguoud music when the game is in standby
mode.
14
2) Adjust the coin mech
The drawing of coin mech:
Using introduction
A. Please take out the plastic coin from the coin chute first,then use
the token as sample coin.
B. Remove the screws in coin entrance. Adjust the fixing chip back
on the coin entrance according to the token’s diameter, which
prevent blocking the coin mech as inserting the large coin in by
mistake.
C. Turn the COIN Switch to “NO” (COIN Signal wire and GND
should be disconnected at usual time). Turning the switch can be
used as the coin mech switch when the game is power on.
D. Adjust the adjusting switch of COIN Signal wave length to
50MS.
E. Adjust the microadjusting resistance of token tolerance.
Clockwise: increasing the sensitivity of token tolerence, that is,
the range of accepting the token tolerance will be larger.
Counterclockwise: decrease the sensitivity, that is, the range will
be smaller and choose the token more strictly.
GRAY RED
BLACK GRAY
COIN SIGNAL
COUNTER(-/+)
N.O.
SW2
SW1
N.C.
GROUND
COUNTER(+/-)
WHITE
50ms MEDIUM
精准
MGN
正常
NOM
25ms FAST
100ms SLOW
SW3
Backward
REPLAC
E
Rem
ove
COIN
Sens
itivi
ty
SLACK
STRICT
DC+12V
Sample Coin Chute
Micro-Resistance
Port For
Power/Signal Input
Switch For Coin
Signal
Adjusting Switch For Coin
Signal W avelength
Coin-Retrn Pole
Adjusting Chip In
Coin Engrance
15
3) adjust the volume
A. Find out the Sound Board.
B. Adjust the microadjusting resistance. Clockwise: decreaseing
the volume; counterclockwise: increaseing the volume.
4) adjust the conveyer.
A. Adjust the height of roller running to control the tightness of
conveyer.
B. Adjust swaying distance to control the left and right deviation
of conveyer to make the conveyer run at the proper position.
tightness adjustor for belt
L/R position adjustor for belt
16
6. TROUBLESHOOTING NO PROBLEM CAUSE SOLUTIONS
The coin machine does't adjust. Adjust the coin mach and the token tolerance of the resistance.
There is false coin in the slit. Take out the blocked false coin.
The redemption machines does't input the voltage of 12V. Check the output voltage and wires of the power box.
The lines of drive singal and cancelation singal come loose.
Check the voltage change and wires of the drive and cancelation singals.
The ticketpressing wheel machines doesn't put down to press the ticket.
Put down the ticketpressing wheel and make the wheel press the ticket.
There are troubles with drive and cancelation port of the mainboard of ticket machines . Replacing the mainboard.
The mainboard does't adjust the entrance to come out ticket. Setting the entrance to come out ticket.
3 The transport strip is askew.
The transport strip must be adjust the location of right and left. Adjust the adjuster of the strip.
Not have the voltage of 24V. Check the power box of 24V and the wires.
Transmission mach is bad. Replacing transmission machine.
The strip is blocked. Adjust the adjuster of the strip.
The mainboard is bad. Replacing.
The switch of the steering wheel is bad. Replacing the switch of moving control .
The car and the control patch come loose. Put away the car.
The moving control of the car is bad. Replacing.
The power box of 24V output the voltage under 22V. Adjust the voltage to 24V.
The inspection eyes of the car location is bad. Replacing.
The volume adjust too lower. Increase the volume.
Voice output singal is open circuit. Connect the circuitry.
Trumpet is bad. Replacing.
The date lines between the sound and mainboard come loose.
Insert the tiein.
Not have the power supply voltage of the voice board.
Connect the circuitry between power box and voice board.
The voice board is bad. Replacing the voice board.
No power supply output in the mach. Turn on the power supply switch and insert the wire of the plug.
Not turn on the power supply switch. Turn on the power supply switch.
The fuse of the power supply is burnout. Replacing the new fuse exclude the circuitry short circuit.
No voltage output in power supply. Replacing the power supply.
The mainboard does't output the power voltage. Connect the mainboard power lines.
The mainboard is bad. Replacing.
1 Can't insert coin.
2 Can't come out the ticket.
4 The transport strip does't move.
5 The car doesn't work.
8 The machine doesn't movement.
6 Win a prize in a lottery is incorrect.
7 The machine doesn't have voice.
17
7. Schematic Diagram
insert coin
ticket meter
coin meter
power
power
start button
left SW
ticket dispenser repair
light for start button
left turn for car
input
right SW
input
car step 5
left side of the car
car step 4
car step 3
car step 2
car step 1
belt origin position
right side of the car
right turn for car
belt motor
light 1 for progress
light 2 for progress
light 3 for progress
light 4 for progress
light 5 for progress
output
output
test key
speaker
display board for score
ticket dispenser feedback
ticket dispenser drive