Manual and Pneumatic Valve Execution Between Flange
-
Upload
marcelene-justine-dionisio -
Category
Documents
-
view
218 -
download
0
Transcript of Manual and Pneumatic Valve Execution Between Flange
8/10/2019 Manual and Pneumatic Valve Execution Between Flange
http://slidepdf.com/reader/full/manual-and-pneumatic-valve-execution-between-flange 1/5
Butterfly valves HC A bit of safety – functional and hygienic
8/10/2019 Manual and Pneumatic Valve Execution Between Flange
http://slidepdf.com/reader/full/manual-and-pneumatic-valve-execution-between-flange 2/5
3
Process and Hygiene
Handtmann
■ Butterfly valves HC
Design in detail
Its structural task is to ensure contamination-free operation dur-
ing production and CIP cleaning. Microbial deposits and chemi-
cal residue can be prevented in the product area.
This has a crucial effect on these requirements and the subse-
quent product quality through the switching functionality of the
butterfly valve. Here the Handtmann know-how lies in the details
and is difficult to recognise at the first glance.
■ Minimizing of the mechanical-dynamic load of the seal
■ Optimum coordination between the sealing
geometry and the installation situation
■ Sealing behaviour with temperature changes
taken into account
Handtmann uses the established EPDM material for its shaped
packing. A standardised, consistent elastomer quality is a
prerequisite to ensure switching functionality, hygiene and the
service life.
■ High abrasion resistance, good antifriction properties
■ High chemical and thermal resistance
■ Good form stability, minimal volume swelling
Reliable and modern – Improved, hygienic construction
and design for even more process and product safety
Safety in detail
Mechanical safety as part of the process
■ Reinforced valve shat for torque transfer
■ Forged valve disks with a favourable flow form
■ Increased pressure blow resistance and closing seal
Biological safety as part of the process
■ Optimised vapour geometry
■ Cleanability according to EHEDG guideline
Cost-effectiveness
■ Long service life of seal
■ Seal shape can be used in older valve types
■ Rotary actuators can be disassembled or repaired
■ Small maintenance costs
The use of Handtmann butterfly valves has been proven effective for decades in
many areas of the food and beverage industry. Safe function with daily operation
– in conjunction with many years of reliable service – is what sets this valve type
apart from the rest.The variety of valves, which can be combined with a control and adjustment unit
if necessary, provides the optimum valve solution for many applications. Butterfly
valves are a cost-effective alternative to distribute and block off fluid and gaseous
processing media.
The Handtmann butterfly valve was structurally revised according to EHEDG
guidelines. The modified product area geometry, the materials used and the
surface quality play a role in achieving a good level of cleanability, which is
confirmed by the institute testing the product.
8/10/2019 Manual and Pneumatic Valve Execution Between Flange
http://slidepdf.com/reader/full/manual-and-pneumatic-valve-execution-between-flange 3/5
5
Butterfly valve types
Handtmann
■ Butterfly valves HC
Switch function manual
Standard butterfly valves Leakage butterfly valve
Switch function pneumatic
The easiest type of operation is manual. The different adapta-
tion possibilities of manual actuation are suitable for all installa-
tion positions.
■ Manual lever with integrated 8 x 45° ball stop,
■ 360° round switch-over, locking optional
■ Manual crank for various settings
■ Bolt-on set for proximity switches
The butterfly valves can optionally be equipped with a pneumatic
actuator. The entire nominal size range is covered with 3 actuator
sizes. The actuator with the standard model is spring-closing/air-open-
ing, other models are available on request.
The switching state of a single butterfly valve is clearly defined via two
possible end positions. They can be recorded via the proximity initiator
or the control head.
■ Actuators are spaciously dimensioned for high torques
■ Integrated assembly points for proximity switches
■ Actuator versions with a settable stroke limitation
■ Actuator versions for the control head or position controller
Handtmann butterfly valves are manufactures as different models. Actuation
can optionally be via a manual lever or via the built-in pneumatic actuator.
Possible monitoring of the switch positions is via a proximity switch or a
control head.
■ Butterfly valves with different process connections
■ Intermediate clamp execution, easy removal of the 2-part valve body
■ Multi-way combination, short discharge with good CIP cleanability
If safe, mechanical media separation is required, leakage butterfly
valves can be used. This cost-effective valve type consists of two
valve disks arranged in succession. One of the valve disks is control-
led via the actuator, the other has forced mechanical control.
The leakage area is equipped with a rinse and leakage valve when
the valve position is closed.
■ Switch function manual or pneumatic
■ Safe media separation
■ Limited switching loss
■ Intermediate clamping execution
Whatever your needs – Handtmann delivers the
ideal butterfly valve for your application
8/10/2019 Manual and Pneumatic Valve Execution Between Flange
http://slidepdf.com/reader/full/manual-and-pneumatic-valve-execution-between-flange 4/5
7
Handtmann
■ Butterfly valves HC
Proximity switch
Control head V.CON
Position controller FLOWfix
The easiest, most cost-effective way to monitor the switching
position. Assembly is sideways under the actuator or with a bolt-
on kit on the bottom with manual actuation.
The newly developed control head V.CON is also available for the
Handtmann actuators. Depending on the control head model,
it takes over pneumatic control, recording and acknowledgement
of the switch positions and the monitoring and acknowledge-
ment of programmed diagnosis and service functions.
■ "High-end" electronics
■ Contact-free, inductive distance measurement system
■ Large, clearly visible LED domed display
■ Easy commissioning
■ Independent determination of the switch positions
■ Service and data interface
■ Connection 24 V, AS-I
The intelligent position controller FLOWfix is especially adapted to
the Handtmann actuators. Many tasks in the fluid and gas control
area can often be performed with simpler, more cost-effective solu-
tions with acceptable precision.
The prescribed adjustment range of the butterfly valve is "intelli-
gently linearised" through adjustment factors dependent on nomi-
nal sizes. This adjustment principle allows an adjustment tolerance
of 0.5 – 2.0 % depending on the medium.
■ Cost-effective, compact adjustment value
■ Control of fluids and gas / CO²■ Housing with display and touch screen
■ Connection 24 V, signal 4 – 20 mA
■ DP profile bus interface
Process automation
Hygiene and automation are closely interrelated. The high demands placed on
quality and quantity can mostly only be met with automated processes. The
complex processes with a variety of process components require an ever-growing
number of "intelligent" control components.
Depending on the requirements, here Handtmann offers different high-quality
control and adjustment components for valve control, monitoring and process
visualisation.
This makes the process reasonable and documentable. User friendliness
and process safety are considerably improved.
Demanding solutions for a smooth flow – Handtmann valve technology
with intelligent control components adapted to the process.
8/10/2019 Manual and Pneumatic Valve Execution Between Flange
http://slidepdf.com/reader/full/manual-and-pneumatic-valve-execution-between-flange 5/5
Albert Handtmann Armaturenfabrik GmbH & Co. KG · Arthur-Handtmann-Str. 11 · D-88400 Biberach an der Riss Telefon +49 (0)7351-342-0 · Fax +49 (0)7351-342-4480 · E-Mail: [email protected] · www.handtmann.de
Technical specifications butterf ly valves
Technical specifications control components
Materials
Product-side 1.4307, 1.4404
Non-product-side 1.4301, 1.4307
Surface
Product-side ≤ 0.8 µm
Non-product-side Finely rotated
Seals
Material EPDM, FDA-compliant
Temperature to 140 °C
Operating data
Operating pressure 0 – 10 bar
Process / CIP 0 – 95 °CControl air 5 – 8 bar
Sizes
DN nominal sizes 25 – 200
OD nominal sizes 1“ – 4“
Positions Functions
Type Switching Adjustment
Proximity switch 1 / 2 x – –
Feedback head V.CON 2 x – –
Control head V.CON 2 x Open / Closed –
Positioner head FLOWfix 0 – 90 ° Open / Closed 0 – 90 °