Place and date:

For the issuing office:

Barendrecht, 02 December 2020 DNV GL - Business Assurance

Zwolseweg 1, 2994 LB Barendrecht,

Netherlands

Erie Koek

Management Representative

Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.

ACCREDITED UNIT: DNV GL Business Assurance B.V., Zwolseweg 1, 2994 LB, Barendrecht, Netherlands. TEL:+31(0)102922689. www.dnvgl.com/assurance

MANAGEMENT SYSTEM

CERTIFICATE

Certificate No:

10000401864-MSC-RvA-AUT

Initial certification date:

30 September 1993

Valid:

02 December 2020 - 30 September 2021

This is to certify that the management system of

Kraus & Naimer Produktion GmbH Schumanngasse 39, 1180 Wien, Austria

and the sites as mentioned in the appendix accompanying this certificate

has been found to conform to the Quality Management System standard:

ISO 9001:2015 This certificate is valid for the following scope:

Development, production and marketing of electrical low voltage switchgear

Certificate No: 10000401864-MSC-RvA-AUT Place and date: Barendrecht, 02 December 2020

Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.

ACCREDITED UNIT: DNV GL Business Assurance B.V., Zwolseweg 1, 2994 LB, Barendrecht, Netherlands. TEL:+31(0)102922689. www.dnvgl.com/assurance Page 2 of 2

Appendix to Certificate Kraus & Naimer Produktion GmbH

Locations included in the certification are as follows: Site Name Site Address Site Scope

Kraus & Naimer Produktion GmbH Schumanngasse 39, 1180 Wien, Austria

Marketing of electrical low voltage switchgear

K&N Schalterentwicklungsgesellschaft m.b.H.

Schumanngasse 39, 1180 Wien, Austria

Development of electrical low voltage switchgear

Kraus & Naimer Produktion GmbH Puchberger Str. 201, 2722 Weikersdorf, Austria

Production of electrical low voltage switchgear

Kraus & Naimer Kft. 9484 Pereszteg, Soproni u. 32, Hungary

Production of electrical low voltage switchgear

Certification Awarded to

KRAUS & NAIMER PRODUCTION LTD 42 MIRAMAR AVENUE, MIRAMAR, WELLINGTON

NEW ZEALAND

Bureau Veritas certify that the Management System of the above organisation has been

audited and found to be in accordance with the requirements of the management system

standards indicated below

STANDARD

ISO 9001:2015 SCOPE OF SUPPLY

THE MANUFACTURE OF LOW VOLTAGE SWITCH GEAR

Original Approval Date: 24 August 1992

Subject to the continued satisfactory operation of the organisation’s Management System,

this certificate is valid until: 24 August 2023

To check the validity of this certificate please call tel. 0800 473 613

Further clarification regarding the scope of this certificate and the applicability of the Management System requirements may be obtained

by consulting the organisation.

Certificate Number: NZ001788-1 Date: 13 August 2020

Andrew Mortimore

Vice President – I&F Pacific Region

Managing office: Bureau Veritas Pty Ltd, 3/435 Williamstown Road, Port Melbourne, Victoria, 3207 Issuing office: Bureau Veritas Pty Ltd, 3/435 Williamstown Road, Port Melbourne, Victoria, 3207