MALTBY DESIGN WEDGES Classic Design For Turf & Sand ... · n CNC Micro Grooves are milled to exact...
Transcript of MALTBY DESIGN WEDGES Classic Design For Turf & Sand ... · n CNC Micro Grooves are milled to exact...
Sole Turf & Sand Model Code Width Loft Bounce Cond. Swing Type
MALTBY DESIGN WEDGES
FEATURES n Form Forged from 1025 Carbon Steel for increased feedback and feel n Classic blade profile combined with an Ultra Game Improvement sole design n Most playable option of all the Maltby Wedges, especially for the novice player or the player struggling to execute the scoring shots from bunkers and around the green n 1.62” consistent sole width, combined with the radiused leading edge and optimal “effective bounce” helps eliminate fat shots n CNC Micro Grooves are milled to exact specifications and will increase spin on less than full shots from around the green n 8⁰ measured bounce on the 56⁰ Loft and 4⁰ bounce on the 60⁰ loft, combined with the wide sole design provide extreme turf forgiveness for cleaner strikes n Conforms to the rules of Golf n Recommended ferrule – 70PI n Product Code – MA0265
Classic Design For Exceptional Playability!
Toe Views
MALTBY DESIGN
TPGRIND
MALTBY DESIGN
TPGRIND
1.62 (Blue)
1.62
(Blue)
Average to Soft
Average to Soft
Steep Attack Angle and Deep Divots
Steep Attack Angle and Deep Divots
56°
60°
8°
4°
MA0265
MA0265
The Maltby Design wedges feature a Tour Preferred classic profile only with a high degree of playability and forgiveness. Each head is coin forged from 1025C Carbon Steel with CNC milled micro grooves for additional spin on less than full shots. The Glider wedges feature an Ultra Game Improvement 1.62" wide sole that will not allow for the face to be manipulated but is easily the easiest wedge to play from both turf and sand. The Glider wedges are designed for forgiveness and can be played by any type of player, but certainly benefit the high handicap player the most. The extreme sole widths of the Glider wedges virtually eliminates fat golf shots from sand shots and all grass conditions.
GLIDER SPECIFICATIONS Loft Lie Wt Hosel RH/ ±1° ±1° ±3g. Offset ID Bounce LH GLID 1.62 56° 64° 310 .040" .370" 8° RH GLID 1.62 60° 64° 308 .040" .370" 4° RH
GLIDER DETAIL Finish ......................................................Satin Polish Material ...................................1025c Stainless Steel Blade Length ..................................................3.149" Toe Height ......................................................2.506" Hosel Length ..................................................3.000" Sole Width ......................................................1.620" Hosel OD.......................................................... .531" Bore Depth .....................................................1.375"