Making a Drawing in Pro Desktop

8/2/2019 Making a Drawing in Pro Desktop

1/8

Making a Drawing in ProDesktop

First open up your model, and leave it open but not maximized.

Next, go to File pull down click on new, then on Drawing, then ok, and then click ok again. Again do not maximize your screen.

Your screen should then look like this:

Next, right click on top of drawing on the top le hand side.

Lines showthe outsidethe paper

For isometric views onlyuncheck this box.

If your view is too large or too

small, check this box.For the Zoom factor:

If you want your view larger put anumber larger then 1 (example:1.5).If you want your view smaller puta number smaller then 1(examples: .75, .5, .25)

When done click on ok.

ng a Drawing in ProDesktop file:///C:/Users/Jenni/Desktop/Making a Drawing in ProDesktop (T

4/3/2012


2/8

Then click on add modeling view.

Then click on From Window, and make sure the name of your model is highlighted, then click ok.


4/3/2012


3/8

When your objects import most of the me all 4 views will not fit on the paper (which is the doed lines on the paper). Which

means you will have to scale your views. To do so Click on your select view tool.

Then double click on the doed lines on the outside of the view you would like to scale.


4/3/2012


4/8

This is what will pop up:

Next, find your view (you may have to use the wheel on your mouse to zoom out to find your view. (heres my view)


4/3/2012


5/8

While using my select view tool

Click on your isometric view, then click and drag it to the correct area (top right side of your paper), then zoom back into your

paper.

Your paper should now look like this.


4/3/2012


6/8

Next, click on the design file of your object.

Then turn it to the front view using your arrow keys on your keyboard.


4/3/2012


7/8

Then click back on your drawing file.

Then right click on top of drawing on the top le hand side of your drawing. Then click on Add Modeling view, from window.Then click ok.

Then repeat the scaling for objects that are too large or too small.

Repeat the steps for the top and right side views.

When you are done you should have 4 views, which should look like this.


4/3/2012


8/8


Making a Drawing in Pro Desktop

Documents

Transcript of Making a Drawing in Pro Desktop