MAKESÊMOVING - Rollplast · - Sprockets and idlers, curves, guide rails profiles, ... Flex FMC -...

MAKES MOVINGMAKES MOVING

magris prides itself on nearly fifty years of experience asone of the leader manufacturer of hinged slat chains andaccessories in steel/stainless steel and thermoplastic resinfor conveyor belts used in packaging, bottling, glass,pharmaceutical, chemical, food, mechanical industry, etc.Nowadays, the magris team continues this activityexporting all over the world through a qualified networkof agents and distributors and also a short delivery timeis granted through a warehouse containing large quantitiesof the most required items (up to 1.000 metres each chaintype); non-stock and tailor-made orders can be supplied inshort term.The choice of chain materials has been specifically studiedby skilled specialists and developed in cooperation withthe main stainless steel and thermoplastic manufacturers,as far as the final performance is granted by chain testswhich strictly conform to international regulations, e.g.careful inspections carried out during all the stages ofproduction, whose quality is constantly supported bytechnological researches.magris production range for conveyor belts includes:- Steel/stainless steel hinged slat chains;- Thermoplastic hinged slat chains;- Sprockets and idlers, curves, guide rails profiles,

accessories and components in thermoplastic resin.

24

1011111112121213131414

151617171718

Materials

Chain sizing

Straight running chains - Single hingeSuper - Hard Inox

Straight running chains - Single hingeSuperspeed - HQ Inox

Straight running chains - Single hingeWear-Proof - HQ Inox

Straight running chains - Single hingeStandard - Inox

Straight running chains - Single hingeSpecial - Inox

Straight running chains - Single hinge316 - Inox 316

Straight running chains - Single hingeStella D - Inox 18/8

Straight running chains - Single hingeAccate C - Carbon steel

Straight running chains - Single hingeAccate - Carbon steel

Mignon straight running chains - Single hingeStella D - Inox 18/8

Mignon straight running chains - Single hingeSuper - Hard Inox14Straight running chains - Single hinge 1 InchSuper - Hard Inox

Straight running chains - Double hingeStandard - Inox

Straight running chains - Single reinforced hingeSuper - Hard Inox

Straight running chains - Double hingeStella D - Inox 18/8

Straight running chains - Double hingeSuper - Hard Inox

Straight running chains - Double hingeAccate - Carbon Steel

Mignon straight running chains - Single hingeStandard - Inox

19 Straight running chains - Double reinforced hingeStella D - Inox 18/8

20 Sideflexing hinged slat chainsFlex RXMC - Inox

20212121

2222222323

242425

Sideflexing hinged slat chainsFlex RXMS - Hard Inox

Sideflexing hinged slat chainsFlex RXM - Inox 18/8

Sideflexing hinged slat chainsFlex RXM - Inox 316

Sideflexing hinged slat chainsFlex RXMA - Carbon Steel

Sideflexing hinged slat chainsFlex FMS - Hard Inox

Sideflexing hinged slat chainsFlex FMD - HQ Inox

Sideflexing hinged slat chainsFlex FM - Inox 18/8

Sideflexing hinged slat chainsFlex FMS2 R=190 mm - Hard Inox

Sideflexing hinged slat chainsFlex FM2 R=190 mm - Inox 18/8

Sideflexing hinged slat chains for magnetic systemsNew Flex Mag - Hard Inox

22

24

Sideflexing hinged slat chainsFlex FMC - Inox

Sideflexing hinged slat chains for magnetic systemsNew Flex Mag - Inox

23 Sideflexing hinged slat chainsFlex FMA2 R=190 mm - Carbon steel

Sideflexing hinged slat chains for magnetic systemsNew Flex Mag D - HQ Inox

Sideflexing chains for magnetic systems -Reinforced hingeNew Flex Mag - Hard Inox

26 Straight running chains with rubber insertsfor inclined conveyorsSuper G/DHG - Hard Inox

272829

Sideflexing hinged slat chains with rubberinserts for inclined conveyorsFlex RXMS G/New Flex G Mag - Hard Inox

Block body machined steel sprockets

1864 Straight running plate top chains

30 1874 Sideflexing plate top chains

31 Steel corrosion resistance table

32 Credits

contents

1

materials

2

HARD INOXSpecial workhardened,chrome-nickel, highlywear corrosionresistant stainless steel.It offers excellentmechanicalcharacteristics andexceptional slidingproperties, thanks toa very low surfaceroughness.It is particularlysuitable for the criticalpoints of bottling lines.Material used for thefollowing chain models:Super, Flex RXMS, FlexFMS, Flex FMS2, NewFlex Mag, Super G,Flex RXMS G and NewFlex Mag G.Minimum temperatures:- 40°CMaximum temperatures:+ 260°C (dry env.),+ 120°C (wet env.)

INOXFerritic, AISI 430stainless steel, workhardened bycold-rolling, with goodcorrosion resistance.It has an excellentsurface finishing with alow roughness, that is avery important qualityfor the sliding ofconveyed products.It is the preferred choicefor standard bottlingindustry applications.Material used for thefollowing chain models:Special, Standard andFlex RXMC.Minimum temperatures:- 40°CMaximum temperatures:+ 260°C (dry env.),+ 120°C (wet env.)

HQ INOX (high quality)Special, new,chrome-nickel(W.1.4589) stainlesssteel, work hardened. Ithas been developed incooperation with amajor stainless steelmanufacturer for veryspecial applications suchas pressurelesscombiners/inliners. Coldrolled to extremely highquality standards, thismaterial is the rightanswer to the mostsophisticated needs.Its exceptional surfacefinishing and flatnesstogether with a veryhigh working load andwear resistance areunique features.Material used for thefollowing chain models:Superspeed,Wear-Proof, Flex FMDand New Flex Mag D.Minimum temperatures:- 40°CMaximum temperatures:+ 260°C (dry env.),+ 120°C (wet env.)

INOX 18/8Austenitic, non-magneticAISI 304 stainless steel(18% Chrome – 8%Nickel), work hardenedfor high resistance.It provides excellentresistance to chemicalagents and corrosion,and offers excellentmechanical andduration characteristics.It is mainly used in thepreservation andbottling industry.Approved by Food andDrug Administration(FDA), Americangovernment institute forthe direct contact withfoodstuff.Material used for thefollowing chain models:Stella D, Flex RXM,Flex FM and Flex FM2.Minimum temperatures:- 40°CMaximum temperatures:+ 400°C (dry env.),+ 120°C (wet env.)

INOX 316Austenitic AISI 316Lstainless steel (18%Chrome – 14% Nickel– 3% Molybdenum). Itis ideal with chemicalagents and strong acids.Material used for thefollowing chain models:316 and Flex RXM 316.Minimum temperatures:- 40°C

Maximum temperatures:+ 400°C (dry env.), + 120°C (wet env.)

CARBON STEELHeat-treated carbonsteel with a surface andcore hardness of 43HRC. It is especiallysuitable for high workingloads and it is highlyresistant to wear.It is recommendedfor the glass, ceramicand general productconveying industry.In case of difficultapplications, such aswith abrasive dust, thecarbon steel can be,upon request,case-hardened, thusreaching a surfacehardness of 55 HRC anda core hardness of 40HRC.Material used for thefollowing chain models:Accate, Flex RXMA andFlex FMA2.Minimum temperatures: - 40°CMaximum temperatures:+ 180°C (dry env.), + 120°C (wet env.)

SLATS

3

PINS

STANDARD PINS

AUSTENITIC 18/8 PINS

HB PINS

AISI 316 PINS

XHB PINS

CASE-HARDENED CARBON STEEL PINS

NB.: Upon request, all our chains can be produced with other types of stainless steel.

The following chain models :Special, Standard, Super, Super G,Flex RXMC, Flex RXMS, Flex RXMS G, Flex FMS, Flex FMS2 and New FlexMag, have pins made of AISI 431stainless steel, magnetic and workhardened for high resistance.

The following chain models :Wear Proof, Superspeed, Flex FMDand New Flex Mag D, have pins madeof special martensitic stainless steel,magnetic and heat-treated for high resistance.

- Increased wear resistance- Pins life up to 40% higher

Special hardened pins series XHB areavailable upon request.They offer an additional wearresistance combined with an highercorrosion strength.

- Pins life up to 100% higher

The following chain models:Stella D, Flex RXM, Flex FM, Flex FM2have pins made of austenitic stainlesssteel (18% Chrome - 8% Nickel), workhardened for high resistance.

- Excellent corrosion resistance.

The following chain models:316 and Flex RXM 316, have pins madeof austenitic AISI 316 stainless steel.

- Exceptional corrosion resistance.

The following chain models:Accate, Accate C, Flex RXMA, FlexRXMA C and Flex FMA2, have pinsmade of case-hardened carbon steel .

Every care has been taken to ensure the accuracy of the information contained in this cataloguebut no liability can be accepted for any errors or omissions.

chain sizing

4

FtFoF1, F2, . . .WcWmLL1, L2, . . .HLsL1s , L2s , . . .R

Chain tension at headshaft (N)Chain tension on return track (N)Sum of all loads (N)Chain weight (Kg/m)Conveyed product weight (Kg/m)Horizontal conveyor length (m)Conveyor track length (m)Vertical conveyor elevation (m)Conveyor length of the section where accumulation occurs (m)Conveyor length of the section where accumulation occurs (m)Curve radius (m)

αKTf1

f2

fpS9.81

Bending angle (gradi)Lenght factor table (table D)Curve factor (table D)Friction factor between chainand wear strips (table A)Friction factor between chainand conveyed products (table A)Start up factor (table B)Slippage factor (table C)Gravity acceleration (m/s 2)

According to the maximum allowable working load method.Chain sizing consists of a comparison between the chain tension at headshaft, which a chain is subject to, and the maximumallowable working load of the chain itself. The following formulas allow an evaluation of the chain tension at headshaftas a function of the different load conditions.

SYMBOLS

Lubricationused

Dry*Water

Soapy waterOil

Friction factor between chainand wear strips

Friction factor between chain and conveyed products

0,500,400,200,20

0,200,150,120,08

High densitypolyethylene, nylatronSteel

0,300,250,15

-

0,450,400,200,15

Metal

0,450,400,250,20

Glass ceramic

Cardboard plastic

Chain materials: carbon steel and stainless steelA f1 f2

0510152025

1,01,41,71,81,92,0

Start ups perhour

B Start up factor

fp

010203040

50>

00,50,70,80,91,0

Slippage timepercentage

C Slippage factor

S

Steel wear strips

1530456090120150180

0,250,520,791,051,572,092,623,14

1,201,301,401,602,002,503,103,50

Bendingangle

degrees α

Curve factor Stainless steel chain

D K T

1,051,101,201,301,501,701,902,10

1,101,201,301,501,802,202,703,00

High density polyethyleneand nylatron wear strips

1,051,101,201,251,351,501,751,90

Lengthfactor

Dry* Lubricated Lubricated Dry*

* Although the theoretical calculation is carried out in dry running conditions,we recommend the use of lubricated chains in order to avoid chain blocking and friction.

5

CONVEYORS WITH SIDEFLEXING CHAINS

In this case the calculation of the chain tension at headshaft is carried out as the sum of successive loads (draw. 1):L2 = K(α2) x R2L4 = K(α4) x R4

1 - Return runthe evaluation of the chain tension in the return run is carriedout by starting at the driven sprockets following the movementof the chain itself up to the return sprocket (draw 2):

Track FETrack FDTrack FCTrack FBTrack FA

Written in a more explicit manner:F0 = {[( L5+L4 ) x Wc x f1 xT(α4)+(L3+L2) x Wc x f1] x T(α2)

+ L1 x Wc x f1} x fp x 9,81

2 - Drive run• Chain tension at headshaft without accumulation •The evaluation of the chain tension in the conveying run iscarried out by starting from the return sprocket following themovement of the chain itself up to the drive sprocket (draw. 3):

Track ABTrack ACTrack ADTrack AETrack AF

• Chain tension at headshaft with accumulation •The component of the chain tension at headshaft dueto the accumulation of material conveyed is evaluatedby starting from the return sprocket towards the drive sprocket,for the only track involved by the accumulation (draw. 3).In this case the total chain tension at headshaft is given by thesum of the component without accumulation plus the one dueto the accumulation of the material:

Track ABTrack ACTrack ADTrack AETrack AF

F5 = Wc x L5 x f1F4 = [F5 + Wc x L4 x f1 ] xT(α4 )F3 = F4 + Wc x L3 x f1F2 = [F3 + Wc x L2 x f1] xT(α2)F1 = F2 + Wc x L1 x f1F0 = F1 x fp x 9,81

F1 = F0 + (Wc + Wm) x L1 x f1+ fp x 9,81F2 = [F1+ (Wc+Wm) x L2 x f1+ fp x 9,81] x T(α2)F3 = F2 + (Wc+Wm) x L3 x f1+ fp x 9,81F4 = [F3 + (Wc+Wm) x L4 x f1+ fp x 9,81] x T(α4)F5 = F4 + (Wc+Wm) x L5 x f1+ fp x 9,81

F1 = F0 + [(Wc+Wm) x L1 x f1 x fp+L1s x Wm x f2 x S] x 9,81F2 = {F1+[(Wc+Wm) x L2 x f1 x fp + L2s x Wm x f2 x S] x 9,81} x T(α2)F3 = F2+[ (Wc+Wm) x L3 x f1 x fp+L3s x Wm x f2 xS] x 9,81F4 = {F3+[(Wc+Wm) x L4 x f1x fp + L4s x Wm x f2 x S] x 9,81} x T(α4)F5 = F4+[ (Wc+Wm) x L5 x f1 x fp + L5s x Wm x f2 xS] x 9,81

6

Horizontal conveyor

Without accumulationFt = (2Wc + Wm) x L x f1 x fp x 9,81With accumulationFt = [(2Wc + Wm) x L x f1 x fp +Ls x Wm x f2 x S] x 9,81

Inclined conveyor

Without accumulationFt = [(2Wc + Wm) x L x f1 x f p +(Wc + Wm) x H] x 9,81With accumulationFt = [(2Wc + Wm) x L x f1 x f p +(Wc + Wm) x H + Ls x Wm x f2 x S] x 9,81

CONVEYORS WITH STRAIGHT RUNNING CHAINS

1864. . . .7.24.0007.94.0007.14.000S.7.04.000SG.7.04.0007.04.000C.7.90.0007.90.0007.25.0007.10.000DX.7.00.000D.7.00.000S.7.00.175S.7.00.000SG.7.00.175SG.7.00.0007.00.000H.7.00.000S.9.00.0007.10.0107.00.0108.25.000SG.8.25.000

Plate top chainDouble reinforced hinged slat chain - Stella D Mod.Double hinged slat chain - Accate Mod. Double hinged slat chain - Stella D Mod. Double hinged slat chain - Super Mod. Double hinged slat chain - Super DHG Mod. Double hinged slat chain - Standard Mod. Single hinged slat chain - Accate C Mod. Single hinged slat chain - Accate Mod. Single hinged slat chain - 316 Mod.Single hinged slat chain - Stella D Mod.Single hinged slat chain - Superspeed Mod.Single hinged slat chain - Wear Proof Mod.Single reinforced hinged slat chain - Super Mod.Single hinged slat chain - Super Mod.Single reinforced hinged slat chain - Super G Mod.Single hinged slat chain - Super G Mod.Single hinged slat chain - Standard Mod.Single hinged slat chain - Special Mod.Single hinged slat chain - 1 Inch Mod.Mignon hinged slat chain - Stella D Mod.Mignon hinged slat chain - Standard Mod.Mignon hinged slat chain - Super Mod.Mignon hinged slat chain - Super G Mod.

SYMBOLS FOR STRAIGHT RUNNING CHAINS

7

FP =

x vt6 x10 4Calculation of Power (P)

where: (P) = Power (kW) , Ft = Chain tension at headshaft on the chain (N), v = Speed (m/min)

Having evaluated the chain tension at headshaft which the chain is subject to, and calculated the speed/length of the conveyor ratio, the two values are stated in figure 4. The chain suitable for the use in question is the one whosecurve is immediately above the intersection of the two values.

CHAIN SELECTION

Cha

inte

nsio

nat

head

shaf

ts(N

)

F tC

hain

tens

ion

athe

adsh

afts

(N)

=

F t=

Ratio =Speed (m/min) Length(m)

Ratio =Speed (m/min) Length(m)

Straight running chainsallowableworking load diagram

Sideflexing chains allowableworking load diagram

9000

7000

6500

5500

4500

3600

2700

2300

79421001800

1600

1400

1100

900

700

5000,2 0,3 0,4 0,5 0,7 0,9 1 2 3 4 5 6 7 8910 15

724

714 S704 SG704704

790 C790

710 S700 SG700 DX700 D700H700 700 S900

725710.010 700.010

6500

5500

4500

3600

2700

230021001800

1600

1400

1100

900

700

5000,2 0,3 0,4 0,5 0,7 0,9 1 2 3 4 5 6 7 8 910 15

893 C893

813 816 D826 S823 SG823 S826 899 - S708 D708 SG708S829 819823 826 708833

825 SG825

S.7.00.175 - SG.7.00.175 - 1864.SS

S.7.08.175 - SG.7.08.175 - 1874.CC - 1874.CS

1864.CC - 1864.CS1874.SS

4

1874. . . .C.8.93.0008.99.0008.93.0008.33.0008.13.0008.16.0008.19.000D.8.26.000S.8.23.000SG.8.23.000S.8.26.000S.8.29.0008.26.0008.23.000D.7.08.000S.7.08.175S.7.08.0007.08.000SG.7.08.175SG.7.08.000

Plate top chainHinged slat chain - Flex RXMA C Mod. Hinged slat chain - Flex FMA2 Mod.Hinged slat chain - Flex RXMA Mod. Hinged slat chain - Flex RXM 316 Mod.Hinged slat chain - Flex RXM Mod.Hinged slat chain - Flex FM Mod.Hinged slat chain - Flex FM2 Mod. Hinged slat chain - Flex FMD Mod.Hinged slat chain - Flex RXMS Mod.Hinged slat chain - Flex RXMS G Mod.Hinged slat chain - Flex FMS Mod. Hinged slat chain - Flex FMS2 Mod. Hinged slat chain - Flex FMC Mod. Hinged slat chain - Flex RXMC Mod. Hinged slat chain - New Flex Mag D Mod. Reinforced hinged slat chain - New Flex Mag Mod. Hinged slat chain - New Flex Mag Mod. Hinged slat chain - New Flex Mag C Mod. Reinforced hinged slat chain - New Flex Mag G Mod. Hinged slat chain - New Flex Mag G Mod.

SYMBOLS FOR SIDEFLEXING CHAINS

8

The 7.10.040 chain, dry-operating, conveys glass wine bottles. The bottles weigh 1,5 Kg each and they are placedon the chain at 20 cm intervals (5 bottles per metre). The chain stops and restarts 10 times per hour.There is accumulation of the 20% operating time and on a length of 8 metres.

Aims:• Chain checking;

Start up data:•Speed (v) = 45 m/min.•Start up factor (fp) = 1,7 (table B)•Slippage time percentage = 20%•Slippage factor (S) = 0,7 (table C)

Calculation of the chain tension at Headshaft (Ft)Ft = [(2Wc + Wm) x L x f1 x fp + Ls x Wm x f2 x S] x 9,81

= [(2 x 2,6 + 7,5) x 12 x 0,20 x 1,7 + 8 x 7,5 x 0,45 x 0,7] x 9,81= 693,72 N

Calculation of the Speed/Length ratio (v/ L)v/ L = 45/ 12 = 3,75 m/min/m

The “allowable working load” diagram shows that the maximum chain tension at headshaft available for that chain and for thatspeed ratio is 1300 N. The selected chain is therefore suitable for our purpose.

Calculation of Power (P)

• Calculation of the power needed by the shaft.

•Length with accumulation (Ls) = 8 m•Friction factor (f2) = 0,45 (table A: chain-glass bottle)•Conveyor length (L) = 12 m

•Chain weight (Wc) = 2,6 Kg/m•Conveyed product weight (Wm) = 7,5 Kg/m•Friction factor (f1) = 0,20 (table A: chain-polyethylene wear strip)

EXAMPLE

FP = t

6 x10 4 6 x10 4

x v 693.72 x 45 = = 0.520kW

9

METAL CHAINS 2012

Straight running chains - Single hinge

SUPER - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance,

with shiny surface having a roughness of Ra ≤ 0,3 micron.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.

D 820 - K 250 internal code 6.00.020SSHR 812 K213* internal code S.7.00.013SSHR 812 K250 internal code S.7.00.020SSHR 812 K325 internal code S.7.00.040SSHR 812 K335 internal code S.7.00.050SSHR 812 K500* internal code S.7.00.090

PRODUCT CODES

D 820 - K 250 internal code 6.00.020SSH 812 K225 internal code S.7.00.015

SSH 812 K263 internal code S.7.00.025SSH 812 K275 internal code S.7.00.200

SSH 812 K250 internal code S.7.00.021


PRODUCT CODES

SSHR 812 K213*SSHR 812 K250SSHR 812 K325SSHR 812 K335SSHR 812 K500*

54.1 -63.5 21/2

82.5 31/4

85.0 -127.0 5

2.82.82.8 75

7575

2.8 752.8 75

2.102.202.602.683.50

* Size produced only upon request - delivery conditions and terms to beagreed. Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.

CHARACTERISTICSSlat width(mm/ ")

GP(mm)

RCC(mm)

Weightkg/m

3030

SSH 812 K263 66.7 25/8 1.6 150 2.33 30303030

Hardness(HRC)

SSH 812 K330 internal code S.7.00.042SSH 812 K350 internal code S.7.00.061SSH 812 K400 internal code S.7.00.070SSH 812 K450 internal code S.7.00.080SSH 812 K600 internal code S.7.00.100SSH 812 K750 internal code S.7.00.110

SSH 812 K225SSH 812 K250

SSH 812 K275SSH 812 K300SSH 812 K325

57.1 21/4

63.5 21/2

69.9 23/4

76.2 382.5 31/4 1.6

1.61.6

1.61.6 150

150

150150150

2.182.25

2.352.502.65

CHARACTERISTICSSlat width (mm/ ")

GP(mm)

RCC(mm)

Weightkg/m

3030

303030

Hardness(HRC)

SSH 812 K330SSH 812 K350SSH 812 K400SSH 812 K450

83.8 319/64

88.9 31/2

101.6 4114.3 41/2

1.6 1501.6 1501.6 1501.6 150

2.702.753.003.30

30303030

SSH 812 K600SSH 812 K750

152.4 6190.5 71/2

1.6 1501.6 150

4.205.10

3030

HB OR XHB PINSUPON REQUEST REDUCED PLATE GAP (1.6)

11

STANDARD - INOX• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface having low roughness.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.

SSR 812 K213* internal code 7.00.013SSR 812 K250 internal code 7.00.020SSR 812 K325 internal code 7.00.040SSR 812 K335 internal code 7.00.050

SS 812 K225 internal code 7.00.015SS 812 K250 internal code 7.00.021

SS 812 K275 internal code 7.00.200SS 812 K300 internal code 7.00.031

SS 812 K263 internal code 7.00.025

SSR 812 K213*SSR 812 K250SSR 812 K325SSR 812 K335

54.1 -63.5 21/2

82.5 31/4

85.0 -2.82.82.8 75

7575

2.8 75

2.102.202.602.68



GP(mm)

RCC(mm)

Weightkg/m

20202020

Hardness(HRC)

SUPERSPEED - HQ INOX• Special, new stainless steel, chrome-nickel (W.1.4589) slats, work hardened for high resistance with very little roughness, Ra ≤ 0.18 micron.• Special martensitic stainless steel pins HB series, magnetic and heat-treated for high resistance.

The chain is produced with a special profile: thanks to its perfect levelness and shiny surface, it is particularly suitable for pressureless combiners/inliners and for high speed systems.

SSX 812 K325 internal code DX.7.00.041

SSX 812 K325 82.5 31/4 1.6 150 2.60


GP(mm)

RCC(mm)

Weightkg/m

30

Hardness(HRC)

WEAR PROOF - HQ INOX• Special, new stainless steel, chrome-nickel (W.1.4589) slats, work hardened for high resistance with very little surface roughness, Ra ≤ 0.2 micron.• Special martensitic stainless steel pins HB series, magnetic and heat-treated for high resistance.

SSHQR 812 K325 internal code D.7.00.040PRODUCT CODES

SSHQR 812 K325 82.5 31/4 2.8 75 2.60Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.


GP(mm)

RCC(mm)

Weightkg/m

30

Hardness(HRC)

SSX 812 K330 83.8 319/64 1.6 150 2.70Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.

30

SSX 812 K330 internal code DX.7.00.042

PRODUCT CODES

SSHQ 812 K325 internal code D.7.00.041

SSHQ 812 K325 82.5 31/4 1.6 150 2.65


GP(mm)

RCC(mm)

Weightkg/m

30

Hardness(HRC)

SSHQ 812 K330 83.8 319/64 1.6 150 2.7530

SSHQ 812 K330 internal code D.7.00.042

PRODUCT CODES

PRODUCT CODES PRODUCT CODES

SS 812 K325 internal code 7.00.041SS 812 K330 internal code 7.00.042SS 812 K350 internal code 7.00.061SS 812 K400 internal code 7.00.070SS 812 K450 internal code 7.00.080SS 812 K600 internal code 7.00.100SS 812 K750 internal code 7.00.110

SS 812 K225SS 812 K250

SS 812 K275SS 812 K300SS 812 K325

57.1 21/4

63.5 21/2

69.9 23/4

76.2 382.5 31/4 1.6

1.61.6

1.61.6 150

150

150150150

2.182.25

2.352.502.65


GP(mm)

RCC(mm)

Weightkg/m

2020

202020

Hardness(HRC)

SS 812 K330 83.8 319/64 1.6 150 2.7020SS 812 K350SS 812 K400SS 812 K450

88.9 31/2

101.6 4114.3 41/2

1.6 1501.6 1501.6 150

2.753.003.30

202020

SS 812 K600SS 812 K750

152.4 6190.5 71/2

1.6 1501.6 150

4.205.10

2020

SS 812 K263 66.7 25/8 1.6 150 2.33 20

REDUCED PLATE GAP (1.6)



XHB PINSUPON REQUEST


STELLA D - INOX 18/8• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome - 8% Nickel), work hardened for HR - shiny - with a roughness of Ra < 0.5 micron.• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work hardened for high resistance.

SSAR 815 K213* internal code 7.10.013 SSAR 815 K250 internal code 7.10.020SSAR 815 K325 internal code 7.10.040SSAR 815 K335* internal code 7.10.050SSAR 815 K500 internal code 7.10.090

SSA 815 K225 internal code 7.10.015SSA 815 K250 internal code 7.10.021

SSA 815 K275 internal code 7.10.200SSA 815 K300 internal code 7.10.031SSA 815 K325 internal code 7.10.041SSA 815 K350 internal code 7.10.061SSA 815 K400 internal code 7.10.070SSA 815 K450 internal code 7.10.080

SSA 815 K263 internal code 7.10.025

SSA 815 K600 internal code 7.10.100SSA 815 K750 internal code 7.10.110

SSAR 815 K213*SSAR 815 K250SSAR 815 K325 SSAR 815 K335* SSAR 815 K500

54.1 -63.5 21/2

82.5 31/4

85.0 -127.0 5

2.82.82.8 75

7575

2.8 752.8 75

2.102.202.602.683.50



GP(mm)

RCC(mm)

Weightkg/m

2626

SSA 815 K263 66.7 25/8 1.6 150 2.33 26262626

Hardness(HRC)

SSA 815 K225SSA 815 K250

SSA 815 K275SSA 815 K300 SSA 815 K325 SSA 815 K350SSA 815 K400SSA 815 K450

57.1 21/4

63.5 21/2

69.9 23/4

76.2 382.5 31/4

88.9 31/2

101.6 4114.3 41/2

1.61.61.6

1.61.6 150

150

150150150

1.6 1501.6 1501.6 150

2.182.25

2.352.502.652.753.003.30


GP(mm)

RCC(mm)

Weightkg/m

2626

262626262626

Hardness(HRC)

SSA 815 K600SSA 815 K750

152.4 6190.5 71/2

1.6 1501.6 150

4.205.10

2626

SPECIAL - INOX• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface having low roughness.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.

SSR 812 K325 internal code H.7.00.040

SSR 812 K325 82.5 31/4 2.8 75 2.55Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.


GP(mm)

RCC(mm)

Weightkg/m

20

Hardness(HRC)

316 - INOX 316• Chrome-nickel, austenitic AISI 316L stainless steel slats (18% Chrome - 14% Nickel - 3% Molybdenum).• Austenitic AISI 316 stainless steel pins.

SSAA 815 K325* internal code 7.25.041 SSAA 815 K450* internal code 7.25.080SSAA 815 K600* internal code 7.25.100SSAA 815 K750* internal code 7.25.110

SSAA 815 K325*SSAA 815 K450*SSAA 815 K600* SSAA 815 K750*

82.5 31/4

114.3 41/2

152.4 6190.5 71/2 1.6

1.61.61.6 150

150150150

2.653.304.205.10



GP(mm)

RCC(mm)

Weightkg/m

----

Hardness(HRC)

PRODUCT CODES

PRODUCT CODES




13

ACCATE - CARBON STEEL• Heat-treated carbon steel slats.• Case-hardened carbon steel pins.

SR 815 K250 internal code 7.90.020SR 815 K325 internal code 7.90.040SR 815 K500 internal code 7.90.090

S 815 K225 internal code 7.90.015S 815 K250 internal code 7.90.021

S 815 K300 internal code 7.90.031S 815 K325 internal code 7.90.041

S 815 K263* internal code 7.90.025

SR 815 K250SR 815 K325SR 815 K500

63.5 21/2

82.5 31/4

127.0 52.82.8 75

752.8 75

2.202.603.50



GP(mm)

RCC(mm)

Weightkg/m

43

S 815 K263* 66.7 25/8 1.6 150 2.33434343

Hardness(HRC)

ACCATE C - CARBON STEEL• Case-hardened carbon steel slats and pins.

SCR 815 K325* internal code C.7.90.040

SCR 815 K325* 82.5 31/4 2.8 75 2.10


GP(mm)

RCC(mm)

Weightkg/m

SC 815 K325* internal code C.7.90.041 SC 815 K350* internal code C.7.90.061


55/40

Hardnesssurf./core



SC 815 K450* internal code C.7.90.080

SC 815 K325*SC 815 K350*

82.5 31/4

88.9 31/2 1.61.6 150

1502.652.75


GP(mm)

RCC(mm)

Weightkg/m

55/4055/40

Hardnesssurf./core

SC 815 K450* 114.3 41/2 1.6 150 3.3055/40

S 815 K350 internal code 7.90.061S 815 K400 internal code 7.90.070S 815 K450 internal code 7.90.080S 815 K473* internal code 7.90.220S 815 K600 internal code 7.90.100S 815 K750 internal code 7.90.110

S 815 K225S 815 K250

S 815 K300S 815 K325

57.1 21/4

63.5 21/2

76.2 382.5 31/4 1.6

1.6

1.61.6 150

150

150150

2.182.25

2.352.50


GP(mm)

RCC(mm)

Weightkg/m

4343

4343

Hardness(HRC)

S 815 K350S 815 K400S 815 K450S 815 K473*

88.9 31/2

101.6 4114.3 41/2

120.0 -

1.61.6 150

1501.6 1501.6 150

2.752.653.003.3043

S 815 K600S 815 K750

152.4 6190.5 71/2

1.6 1501.6 150

4.205.10

4343

434343



14

Mignon straight running chains - Single hinge

STANDARD - INOX• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface

having low roughness.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.

Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.


STELLA D - INOX 18/8• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome -

8% Nickel), work hardened for HR - shiny - with a roughness of Ra < 0.5micron.

• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work hardenedfor high resistance.

SSR 812 K197 internal code 7.00.010

SSAR 815 K197 internal code 7.10.010

SSR 812 K197 50.0 - 2.5 90 1.60


GP(mm)

RCC(mm)

Weightkg/m

20

Hardness(HRC)

SSAR 815 K197 50.0 - 2.5 90 1.60


GP(mm)

RCC(mm)

Weightkg/m

26

Hardness(HRC)

PRODUCT CODES

PRODUCT CODES


with shiny surface having a roughness of Ra ≤ 0.3 micron.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.

SSHR 812 K125 internal code 8.25.280

SSHR 812 K125 31.8 11/4 2.8 75 1.10


GP(mm)

RCC(mm)

Weightkg/m

30

Hardness(HRC)

SSHR 812 K175 44.5 13/4 2.8 75 1.3030

SSHR 812 K175 internal code 8.25.300

PRODUCT CODES


HB OR XHB PINSUPON REQUEST

15

NEWStraight running chains - Single hinge 1 Inch


with shiny surface having a roughness of Ra ≤ 0,3 micron.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.



SSH 512 K217 internal code S.9.00.017


PRODUCT CODES

* Standard shipping lengths: 120 pitches = 10 feet = 3,048 metres.


CHARACTERISTICSSlat width

(mm)GP(mm)

RCC(mm)

Weightkg/m

Hardness(HRC)

SSH 512 K197 50.0 1.6 100 2.2030SSH 512 K217 55.0 1.6 100 2.2930SSH 512 K236 60.0 1.6 100 2.4130SSH 512 K250 63.5 1.6 100 2.4930SSH 512 K283 72.0 1.6 100 2.6530SSH 512 K325 82.5 1.6 100 2.8630SSH 512 K350 88.9 1.6 100 3.0130SSH 512 K400 101.6 1.6 100 3.2630




Straight running chains - Single reinforced hinge


with shiny surface having a roughness of Ra ≤ 0.3 micron.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.

SSH 8127 K750 internal code S.7.00.175PRODUCT CODES


CHARACTERISTICSSlat width(mm/ “)

GP(mm)

RCC(mm)

Weightkg/m

Hardness(HRC)

SSH 8127 K750 190.5 71/2 1.6 150 5.1030

17

Straight running chains - Double hinge

STANDARD - INOX• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface having low roughness.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.

SUPER - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance, with shiny surface having a roughness of Ra ≤ 0.3 micron.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.

STELLA D - INOX 18/8• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome - 8% Nickel), work hardened for HR - shiny - with a roughness of Ra < 0.5 micron.• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work hardened for high resistance.

SS 802 K750 internal code 7.04.110


SS 802 K750 190.5 71/2 1.6 150 5.80


GP(mm)

RCC(mm)

Weightkg/m

20

Hardness(HRC)


SSA 805 K750 internal code 7.14.110

SSA 805 K750 190.5 71/2 1.6 150 5.80


GP(mm)

RCC(mm)

Weightkg/m

26

Hardness(HRC)

SSH 802 K750 190.5 71/2 1.6 150 5.80


GP(mm)

RCC(mm)

Weightkg/m

30

Hardness(HRC)

PRODUCT CODES

PRODUCT CODES

PRODUCT CODES





ACCATE - CARBON STEEL• Heat-treated carbon steel slats.• Case-hardened carbon steel pins.

SR 802 K750 internal code 7.94.111

SR 802 K750 190.5 71/2 2.8 75 5.70


GP(mm)

RCC(mm)

Weightkg/m

43

Hardness(HRC)

PRODUCT CODES


S 802 K750 internal code 7.94.110


GP(mm)

RCC(mm)

Weightkg/m

Hardness(HRC)

S 802 K750 190.5 71/2 1.6 150 5.80 43

PRODUCT CODES


18


19

STELLA D - INOX 18/8• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome - 8% Nickel),

work hardened for high resistance - shiny - with a roughness of Ra < 0.5 micron.• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work hardened

for high resistance.


SSAR 804 K670 170.0 - 2.5 90 6.30


GP(mm)

RCC(mm)

Weightkg/m

26

Hardness(HRC)

SSAR 804 K750 190.5 71/2 2.5 90 6.8026


Straight running chains - Double reinforced hinge

PRODUCT CODES


20

Sideflexing hinged slat chains

FLEX RXMS - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high

resistance, with shiny surface having a roughness of Ra ≤ 0.3 micron.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome -

8% Nickel), work hardened for high resistance.• AISI 431 stainless steel pins, magnetic and work hardened for high

resistance.

FLEX RXMC - INOX• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface

having low roughness.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome -

8% Nickel), work hardened for high resistance.• AISI 431 stainless steel pins, magnetic and work hardened for

high resistance.

SS 881 T K325 internal code 8.23.041 SSH 881 K325 internal code S.8.23.040SSH 881 K450 internal code S.8.23.080SSH 881 K750 internal code S.8.23.110SSH 881 T K325 internal code S.8.23.041SSH 881 T K450 internal code S.8.23.081SSH 881 T K750 internal code S.8.23.111

SS 881 T K325 82.5 31/4 457 3.10



Min. sideflexing radius(mm)

Weightkg/m

SSH 881 K325 SSH 881 K450SSH 881 K750SSH 881 T K325SSH 881 T K450SSH 881 T K750

82.5 31/4

114.3 41/2

190.5 71/2

82.5 31/4

114.3 41/2

190.5 71/2

2.182.252.352.502.652.85


Weightkg/m

457500500457500500




21

SSA 881 K325SSA 881 K450SSA 881 K750SSA 881 T K325SSA 881 T K450SSA 881 T K750

2.903.605.303.103.805.50

CHARACTERISTICS

SSAA 881 T K325*SSAA 881 T K450*SSAA 881 T K750*

3.103.805.50

CHARACTERISTICS

FLEX RXM - INOX 18/8

FLEX RXM - INOX 316

S 881 K325S 881 K450S 881 K750S 881 T K250S 881 T K325S 881 T K450

114.3 41/2

190.5 71/2

63.5 21/2

82.5 31/4

114.3 41/2

2.903.605.302.653.103.80

CHARACTERISTICS

S 881 T K750 190.5 71/2 5.50

82.5 31/4 457500500457457500500

114.3 41/2

190.5 71/2

82.5 31/4 457500500

114.3 41/2

190.5 71/2

82.5 31/4

114.3 41/2

190.5 71/2

82.5 31/4 457500500457500500

PRODUCT CODES

PRODUCT CODESSSA 881 K325 internal code 8.13.040SSA 881 K450 internal code 8.13.080SSA 881 K750 internal code 8.13.110SSA 881 T K325 internal code 8.13.041SSA 881 T K450 internal code 8.13.081SSA 881 T K750 internal code 8.13.111

SSAA 881 T K325* internal code 8.33.041SSAA 881 T K450* internal code 8.33.081SSAA 881 T K750* internal code 8.33.111

Weightkg/m

Weightkg/m

• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome - 8% Nickel), work hardened for HR - shiny with a roughness of Ra < 0.5 micron.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome - 8% Nickel), work hardened for high resistance.• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work hardened for high resistance.

• Chrome-nickel, austenitic AISI 316L stainless steel slats (18% Chrome - 14% Nickel - 3% Molybdenum).• Chrome-nickel, austenitic AISI 316L stainless steel guide shoes.• Austenitic AISI 316 stainless steel pins.

S 881 K325 internal code 8.93.040S 881 K450 internal code 8.93.080S 881 K750 internal code 8.93.110S 881 T K250 internal code 8.93.021S 881 T K325 internal code 8.93.041S 881 T K450 internal code 8.93.081S 881 T K750 internal code 8.93.111

Weightkg/m


Slat width(mm/ ")


Slat width(mm/ ")


Slat width(mm/ ")


PRODUCT CODES

FLEX RXMA - CARBON STEEL• Heat-treated carbon steel slats, with a surface and core hardness of 43 HRC.• Case-hardened carbon steel pins.NOTE: Upon request, the “Flex RXMA Tab”chain with a slat width of 82.5 mm (3 1/4”) can be produced in case-hardened carbon steel having a surfacehardness of 55 HRC and a core hardness of 40 HRC (code: C.8.93.041).

NEW

FLEX FM - INOX 18/8• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome - 8% Nickel),

work hardened for HR - shiny - with a roughness of Ra < 0.5 micron.• Chrome-nickel, austenitic stainless steel guide shoes

(18% Chrome - 8% Nickel), work hardened for high resistance.• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work

hardened for high resistance.

SSH 8811 K325 internal code S.8.26.040SSH 8811 K350 internal code S.8.26.060SSH 8811 K450 internal code S.8.26.080SSH 8811 K750 internal code S.8.26.110SSH 8811 T K325 internal code S.8.26.041SSH 8811 T K330 internal code S.8.26.042SSH 8811 T K350 internal code S.8.26.061SSH 8811 T K450 internal code S.8.26.081SSH 8811 T K750 internal code S.8.26.111

SSX 8811 T K325 internal code D.8.26.041SSX 8811 T K330 internal code D.8.26.042

SSH 8811 K325SSH 8811 K350SSH 8811 K450SSH 8811 K750

2.903.103.605.30


CHARACTERISTICSWeightkg/m

SSX 8811 T K325 3.10


FLEX FMS - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for HR, with

shiny surface having a roughness of Ra ≤ 0.3 micron.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome -

8% Nickel), work hardened for high resistance.• AISI 431 stainless steel pins, magnetic and work hardened for high

resistance.

FLEX FMD - HQ INOX• Special, new stainless steel, chrome-nickel (W.1.4589) slats, work hardened

for HR, with low surface roughness, Ra ≤ 0.2 micron.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome -

8% Nickel), work hardened for high resistance.• Special martensitic stainless steel pins HB series, magnetic and

heat-treated for high resistance.

SSA 8811 K325 internal code 8.16.040 SSA 8811 K350 internal code 8.16.060SSA 8811 T K325 internal code 8.16.041SSA 8811 T K350 internal code 8.16.061

SSA 8811 K325SSA 8811 K350SSA 8811 T K325SSA 8811 T K350

2.903.103.103.30


88.9 31/2

114.3 41/2

190.5 71/2

82.5 31/4

Slat width(mm/ ")

SSH 8811 T K325

SSH 8811 T K350

3.10

3.30

82.5 31/4

88.9 31/2

SSH 8811 T K450SSH 8811 T K750

3.805.50

114.3 41/2

190.5 71/2

500500610610500

SSH 8811 T K330 3.1583.8 319/64 500500610610


82.5 31/4

Slat width(mm/ ")

500SSX 8811 T K330 3.1583.8 319/64 500

Min. sideflexing radius(mm) 88.9 31/2

82.5 31/4

88.9 31/2

82.5 31/4

Slat width(mm/ ")

500500500500


22

PRODUCT CODES

SS 8811 T K325 internal code 8.26.041SS 8811 T K330 internal code 8.26.042SS 8811 T K450 internal code 8.26.081SS 8811 T K750 internal code 8.26.111


FLEX FMC - INOX• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface

having low roughness.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome -

8% Nickel), work hardened for high resistance.• AISI 431 stainless steel pins, magnetic and work hardened for

high resistance.

Slat width(mm/ ")

SS 8811 T K325SS 8811 T K330

3.103.15

82.5 31/4

83.8 319/64

SS 8811 T K450SS 8811 T K750

3.805.50

114.3 41/2

190.5 71/2

500500610610


PRODUCT CODES

PRODUCT CODES

PRODUCT CODES

REDUCEDPLATE GAP



23

FLEX FM2 - R = 190mm INOX 18/8• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome - 8% Nickel), work hardened for high resistance - shiny - with a roughness of Ra < 0.5 micron.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome - 8% Nickel), work hardened for high resistance.• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work hardened for high resistance.

FLEX FMS2 - R = 190mm HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance, with shiny surface having a roughness of Ra ≤ 0.3 micron.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome - 8% Nickel), work hardened for high resistance.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.

SSH 8811 R T K325 internal code S.8.29.041

SSH 8811 R T K325 3.00


82.5 31/4

Slat width(mm/ ")

190


PRODUCT CODES

FLEX FMA2 - R = 190mm CARBON STEEL• Heat-treated carbon steel slats, with a surface and core hardness of 43 HRC.• Case-hardened carbon steel pins.

Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.Not to be used with a lateral curving discs.

SSA 8811 R T K325 internal code 8.19.041

SSA 8811 R T K325 3.00


82.5 31/4

Slat width(mm/ ")

190


PRODUCT CODES

S 8811 R T K325 internal code 8.99.041

S 8811 R T K325 3.00


82.5 31/4

Slat width(mm/ ")

190


PRODUCT CODES

REDUCED SIDEFLEXINGRADIUS (R.190)


NEW

24

Sideflexing hinged slat chains for magnetic systems

NEW FLEX MAG D - HQ INOX• Special, new stainless steel, chrome-nickel (W.1.4589) slats - magnetic - work

hardened for HR, with shiny surface having a roughness of Ra ≤ 0.2 micron.• Special, martensitic stainless steel pins HB series, magnetic and heat-treated for high resistance.

SSX 8811 M K325 internal code D.7.08.040

SSH 8811 M K325 internal code S.7.08.040SSH 8811 M K330 internal code S.7.08.042

PRODUCT CODES

PRODUCT CODES

SSH 8811 M K450 internal code S.7.08.080SSH 8811 M K750 internal code S.7.08.110

SSX 8811 M K330 internal code D.7.08.042

SSH 8811 M K325 2.50


82.5 31/4

Slat width(mm/ ")

500



SSH 8811 M K330SSH 8811 M K450SSH 8811 M K750

2.653.204.90

114.3 41/2

190.5 71/2

83.8 319/64 500500500

SSX 8811 M K325 2.50


82.5 31/4

Slat width(mm/ ")

500


SSX 8811 M K330 2.6583.8 319/64 500

NEW FLEX MAG - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance,

with shiny surface having a roughness of Ra ≤ 0.3 micron.• Special, stainless steel pins, 400 series - magnetic - work hardened for high resistance.

SS 8811 M K325 internal code 7.08.040SS 8811 M K330 internal code 7.08.042

PRODUCT CODES

SS 8811 M K450 internal code 7.08.080SS 8811 M K750 internal code 7.08.110

SS 8811 M K325 2.50


82.5 31/4

Slat width(mm/ ")

500


SS 8811 M K330SS 8811 M K450SS 8811 M K750

2.653.204.90

114.3 41/2

190.5 71/2

83.8 319/64 500500500

NEW FLEX MAG - INOX• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface

having low roughness.• Special, stainless steel pins, 400 series-magnetic-work hardened for high resistance.



REDUCEDPLATE GAP

25

Sideflexing chains for magnetic systems - Reinforced hinge

NEW FLEX MAG - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance, with shiny surface having a roughness of Ra ≤ 0.3 micron.• Special, stainless steel pins, 400 series - magnetic - work hardened for high resistance.

SSH 8817 M K750 internal code S.7.08.175

SSH 8817 M K750 5.03



190.5 71/2

Slat width(mm/ ")

750


PRODUCT CODES


26

Straight running chains with rubber inserts for inclined conveyors

SUPER G / DHG - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance, with a rubber insert.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome - 8% Nickel), (Super-G TAB).• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.

SSHR 812 G K125 internal code SG.8.25.280SSHR 812 G K325 internal code SG.7.00.040SSHR 812 T G K325 internal code SG.7.00.T40

SSHR 812 G K125SSHR 812 G K325SSHR 812 T G K325

1.202.803.40


SSH 802 G K750 internal code SG.7.04.110

SSH 802 G K750 6.20


SSH 812 G K450 internal code SG.7.00.080SSH 812 G K600 internal code SG.7.00.100SSH 812 G K750 internal code SG.7.00.110

SSH 812 G K450SSH 812 G K600SSH 812 G K750

3.504.405.30


31.8 11/4

82.5 31/4

82.5 31/4 2.82.82.8 75

7575

Slat width(mm/ ")

GP(mm)

RCC(mm)

303030

Hardness(HRC)

114.3 41/2

152.4 6190.5 71/2 1.6

1.61.6 150

150150

Slat width (mm/ ")

GP(mm)

RCC(mm)

303030

Hardness(HRC)

190.5 71/2 1.6 150

Slat width(mm/ ")

GP(mm)

RCC(mm)

30

Hardness(HRC)

PRODUCT CODES

PRODUCT CODESSSH 8127 G K750 internal code SG.7.00.175

SSH 8127 G K750 5.35


190.5 71/2 1.6 150

Slat width(mm/ ")

GP(mm)

RCC(mm)

30

Hardness(HRC)

PRODUCT CODES

PRODUCT CODES




REDUCED PLATE GAP (1.6)REDUCED PLATE GAP (1.6)

27

Sideflexing hinged slat chains with rubber inserts for inclined conveyors

FLEX RXMS G / NEW FLEX G MAG - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance, with a rubber insert.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome - 8% Nickel), (Flex RXMS - G).• Special, stainless steel pins, 400 series - magnetic - work hardened for high resistance.

SSH 881 G K325 internal code SG.8.23.040SSH 881 G K450 internal code SG.8.23.080SSH 881 G K750 internal code SG.8.23.110SSH 881 T G K325 internal code SG.8.23.041SSH 881 T G K450 internal code SG.8.23.081SSH 881 T G K750 internal code SG.8.23.111

SSH 881 G K325SSH 881 G K450SSH 881 G K750SSH 881 T G K325SSH 881 T G K450SSH 881 T G K750

3.103.805.503.304.005.70



114.3 41/2

190.5 71/2

82.5 31/4

114.3 41/2

190.5 71/2

82.5 31/4

Slat width(mm/ ")

457500500457500500


SSH 881 M G K325 internal code SG.7.08.040SSH 881 M G K750 internal code SG.7.08.110

SSH 881 M G K325SSH 881 M G K750

2.705.10


190.5 71/2

82.5 31/4

Slat width(mm/ ")

500500


SSH 8817 M G K750 internal code SG.708175

SSH 8817 M G K750 5.14


190.5 71/2

Slat width(mm/ ")

750



PRODUCT CODES


28

Block body machined steel sprockets

FOR MIGNON /FLEX RXMC/FLEX RXMS/FLEX RXM/FLEX RXM 316/FLEX RXMA/FLEX FMC/FLEX FMS/FLEX FMD/FLEX FM/FLEX FMS2/FLEX FM2/FLEX FMA2/FLEX RXMS G/SUPER G TAB CHAINSThe sprocket tooth pitch (mm 19,05) is half the pitch of the chain (38,1 mm). Therefore, when a sprocket with an odd number ofteeth is used, the teeth engage the chain only every other revolution. This doubles the life of sprockets.

8.12.1208.12.1308.12.1408.12.1508.12.160

31.031.031.031.031.0

2.202.703.303.904.60

CODES / CHARACTERISTICSWidth(mm)

1921232527

Number ofteeth (z)

Weightkg/unit

117.10130.05142.00154.20166.60

DE outsidediameter (mm)

20.020.020.020.020.0

F plain borediameter (mm)

117.35129.25141.20153.20165.20

Pitchdiameter (mm)

FOR STRAIGHT RUNNING CHAINS AND FOR NEW FLEX MAG/NEW FLEX MAG D/NEW FLEX MAG G CHAINSThe sprocket tooth pitch (mm 19,05) is half the pitch of the chain (38,1 mm). Therefore, when a sprocket with an odd number of teeth is used,the teeth engage the chain only every other revolution. This doubles the life of sprockets.

8.12.0208.12.0308.12.0408.12.0508.12.060

43.5043.5043.5043.5043.50

3.053.804.605.406.40

CODES / CHARACTERISTICSWidth(mm)

1921232527

Number ofteeth (z)

Weightkg/unit

117.10130.05142.00154.20166.60

DE outsidediameter (mm)

20.020.020.020.020.0

F plain borediameter (mm)

117.35129.25

8.12.0058.12.010

43.5043.50

1.862.34

1517

92.90104.70

20.020.0

93.70105.47

141.20153.20165.20

Pitchdiameter (mm)

8.12.0708.12.080

43.5043.50

7.508.70

2931

179.05191.25

20.020.0

177.25189.30

29

1864 Straight running plate top chains

1864This high speed, high capacity series offers better efficiency and reliability in applications where high temperatures or abrasive materials are involved.• Steel and stainless steel top plates.• Base roller chain, 19,05 mm - 3/4” pitch ANSI 60.

1864 SS K325 internal code 1864.SS.0411864 SS K450 internal code 1864.SS.0811864 SS K600 internal code 1864.SS.1011864 SS K750 internal code 1864.SS.111

1864 SS K3251864 SS K4501864 SS K600

3.334.005.33

CHARACTERISTICSWeight

kg/m

82.5114.3152.4

Slat width(mm)

260002600026000

Ultimate strenght(N)

1864 SS K750 5.68190.5 26000

PRODUCT CODES1864 K325 internal code 1864.CC.0411864 K450 internal code 1864.CC.0811864 K600 internal code 1864.CC.1011864 K750 internal code 1864.CC.111

1864 K3251864 K4501864 K600

3.334.005.33

Weightkg/m

82.5114.3152.4

Slat width(mm)

370003700037000


1864 K750 5.68

1864 A K325 internal code 1864.CS.0411864 A K450 internal code 1864.CS.0811864 A K600 internal code 1864.CS.1011864 A K750 internal code 1864.CS.111

1864 A K3251864 A K4501864 A K600

3.334.005.33

Weightkg/m

82.5114.3152.4

Slat width(mm)

370003700037000


1864 A K750 5.68190.5 37000


NOTE ON MATERIALS1864 - steel base roller chain, steel top plate.1864 A - steel base roller chain, stainless steel top plate.1864 SS - stainless steel base roller chain, stainless steel top plate.

CHARACTERISTICS

CHARACTERISTICS

190.5 37000

PRODUCT CODES

PRODUCT CODES

30

1874 Sideflexing plate top chains

1874This high speed, high capacity series offers better efficiency and reliability in applications where high temperatures or abrasive materials are involved.• Steel and stainless steel top plates.• Base roller chain, 19,05 mm - 3/4” pitch ANSI 63 SB.

D 820 - K 250 internal code 6.00.0201874 K325 internal code 1874.CC.0411874 K450 internal code 1874.CC.0811874 K600 internal code 1874.CC.1011874 K750 internal code 1874.CC.111

1874 K3251874 K4501874 K600

4.204.805.70


kg/mR

(mm)

82.5114.3152.4 34.1

34.134.1

Slat width(mm)

Straight C(mm)

Curve C(mm)

270002700027000

Ultim. str.(N)

1874 K750 6.40190.5 34.134.634.634.6

34.6457356356

61027000

1874 A K325 internal code 1874.CS.0411874 A K450 internal code 1874.CS.0811874 A K600 internal code 1874.CS.1011874 A K750 internal code 1874.CS.111

1874 A K3251874 A K4501874 A K600

4.204.805.70


kg/mR

(mm)

82.5114.3152.4 34.1

34.134.1

Slat width(mm)

Straight C(mm)

Curve C(mm)

270002700027000

Ultim. str.(N)

1874 A K750 6.40190.5 34.134.634.634.6

34.6457356356

61027000

PRODUCT CODES

1874 SS K325 internal code 1874.SS.0411874 SS K450 internal code 1874.SS.0811874 SS K600 internal code 1874.SS.1011874 SS K750 internal code 1874.SS.111

1874 SS K3251874 SS K4501874 SS K600

4.204.805.70


kg/mR

(mm)

82.5114.3152.4 34.1

34.134.1

Slat width(mm)

Straight C(mm)

Curve C(mm)

210002100021000

Ultim. str.(N)

1874 SS K750 6.40190.5 34.134.634.634.6

34.6457356356

61021000

PRODUCT CODES

PRODUCT CODES


NOTE ON MATERIALS1874 - steel base roller chain, steel top plate.1874 A - steel base roller chain, stainless steel top plate.1874 SS - stainless steel base roller chain, stainless steel

top plate.

Legend

o = Little resistance - not recommended

= Good resistance - it can be used= Average resistance•

••

The

indi

cate

dda

taar

eap

prox

imat

eas

the

corr

osio

nre

sist

ance

ofth

eab

ove-

men

tione

dst

eels

,acc

ordi

ngto

the

cond

ition

sof

use,

isre

late

dto

the

wor

kte

mpe

ratu

re,t

heco

ncen

tratio

nof

the

chem

ical

agen

t,th

edu

ratio

nof

the

cont

actw

ithit,

etc.

CHEMICAL AGENTAcetic acidAcetoneAluminium chlorideAmmoniaAmmonium chlorideAmyl alcoholAnilineAnimal oilBeerBenzeneBenzoic acidBenzolBoric acidBrineButterButyl alcoholButyric acidCalcium chlorideCarbon disulphideCarbon tetrachlorideCarbonated drinksCaustic soda (20%)Chlorine waterChloroformCitric acidCopper sulphateDiet oilDiet fatDiluted acetic acidDistilled waterEthyl acetateEthyl alcoholEthyl chlorideFlax oilFormaldehydeFormic acidFreon 12Fresh waterFruit juiceGasolineGlycerineHydrochloric acidHydrofluoric acidHydrogen peroxideIodineIron chlorideLactid acidMagnesium chlorideMercuryMethyl alcoholMethylene chlorideMilkNitric acidOilOil etherOleic acidParaffinPhenolPhosphoric acidPotassium hydroxineSea waterSilver nitrateSoapy waterSodium carbonateSodium chlorideSodium hydroxineSodium hypochloriteSodium silicateSodium sulphateSoft drinksSulphuric acidTartaric acidTrichlorethyleneTurpentineVegetable juiceVegetable oilVinegarWhiskeyWineXilol

STAINLESS STEEL STAINLESS STEELFERRITIC

INOX

SPECIAL Cr-NiSTAINLESS STEEL STAINLESS STEELSPECIALNEWCr-Ni

HARD INOX HQ INOX

AUSTENITICSTAINLESS STEEL

AUSTENITIC

INOX 18/8 INOX 316o

o

oo•

••••

o

••

••

•••••

o

o

o

o

o

•

o•• •• ••

o o o

••••

••o

o o o •

• •o

•• •• •o

o o oo o o

oo

o o•• ••

••

•

•

•

•••••

o

o

•

••

•• ••

••

••••

••••

• ••

••

••••

•• •••• ••

•

•• •

•••••

o o o

•• •• ••

•• ••• •• ••

o o o

o o oo

o ooo

o oo

ooo

oo

o

o

•oo

o o

•• •

• •

•o o

•• •• ••

ooo

o

•

•

•

•••

•

•

••

oo

o••

oooo

ooo

oo

•

•

•

•

••••••

••••••

••••••

o•

••

o

o•

••

ooo

oo

o•••

•

o•

••

o

•••

ooo

•o

o•••

•••

•••

•••

•

o•••

o

•• •

••

••

•••

•• •• •• ••

•o

o

••••

••

••

••••••

••••••••••

••

••••

•

•

••••

••••••••••

•

•

•••••

••

•••••••••••••••••••

••

••••

••

•••••••••••••••••

CARBON STEELooooooo

•••oo•ooooooo

o

ooo

•

ooo•oooo

oo

oo•

oo•ooo

oo

ooooooooo•o

••oo

o

ooo

o

oo

oooo

o

•oo

o

o

o

ooooo

••

oo

o

•

••

••

••

o o o •

•

•••

•••

•••

•

•••

••••

••

••

•

••

••

••••••••

••••

••

••••

••••

••

••

•

••••••••••

•

••

••

oo

o••

••••

••••••••••••••••••••••

••

•••

•••••••••••••••••

••••o

••••••

o

••

Steel corrosion resistance table

31Zinc chloride

A

E

D

C

B

F

G

H

I

LM

NO

P

S

V

T

W

XZ

••••

•••••••

••

32graphic project: signal lost / london

MAGRIS s.r.l.via Vanizza 10 (z.i. Sarano) 31025 S. Lucia di Piave TV - Italytel +39 0438 460226 / fax +39 0438 701843e-mail [email protected]

MAKESÊMOVING - Rollplast · - Sprockets and idlers, curves, guide rails profiles, ... Flex FMC -...

Documents

Transcript of MAKESÊMOVING - Rollplast · - Sprockets and idlers, curves, guide rails profiles, ... Flex FMC -...