Major Progess Ppt
-
Upload
jayant-modi -
Category
Documents
-
view
38 -
download
0
description
Transcript of Major Progess Ppt
PowerPoint Presentation
STUDY AND DESIGN OF WIND TUNNELSME 400BMajor project progress presentation on
Department Of Mechanical EngineeringSIR PADAMPAT SINGHANIA UNIVERSITY, UDAIPURTEAM COMPOSITION22OBJECTIVE OF THE MAJOR PROJECTTO DESIGN AND ANALYSE DIFFERENT PROFILES FOR CONTRACTION CONE AND DIFFUSER SECTION.
TO ANALYSE THESE PROFILES FOR THEIR PERFORMANCE AND EFFICIENCY USING FEM/CFD SOFTWARE.
TO RESEARCH THE MARKET FEASIBILITY OF THE PROJECT.3RECAPTULATIONDuring the minor project research, we have calculated the dimensions for an open circuit subsonic wind tunnel model to test a standard size automobile prototype.
The assumptions for the modelling are as follows: Maximum wind velocity at Test section is 50m/sFlow rate at wind tunnel is 180m3/sMaximum length of wind tunnel is 24m4Test Section
Length: 5 mBreath: 2 mHeight: 1.8 mContraction Cone
Length: 5 mInlet Dimensions: Outlet Conditions:Breadth: 6.67 mBreadth: 2 mHeight: 6 mHeight: 1.8 mDiffuser Section
Length: 6 mInlet Dimensions: Outlet Conditions:Breadth: 2 mBreadth: 2.31 mHeight: 1.8 mHeight: 2.56 m
5METHODOLOGY TO ACHIEVE OBJECTIVES1. CONTRACTION CONE In the design of flow-conditioning contractions for low-speed (i.e.