MAINTENANCE ORGANISATION APPROVAL CERTIFICATE · 2021. 1. 5. · allied signal t-62t-40c11 allied...
3
Page 1 of 3 EASA Form 3 – 145 Issue 4 MAINTENANCE ORGANISATION APPROVAL CERTIFICATE Reference: EASA.UK.145.01427 Pursuant to Regulation (EU) N° 2018/1139 of the European Parliament and of the Council and to Commission Regulation (EU) N°1321/2014 and subject to the conditions specified below, the European Union Aviation Safety Agency hereby certifies: FAO SERVICES LIMITED 77 OAK GROVE POYNTON STOCKPORT CHESHIRE SK12 1AD UNITED KINGDOM as a maintenance organisation in compliance with Section A of Annex II (Part-145) of Regulation (EU) N° 1321/2014, approved to maintain the products, parts and appliances listed in the attached terms of approval and issue related certificates of release to service using the above references and, when stipulated, to issue recommendations and airworthiness review certificates after an airworthiness review as specified in point ML.A.0903 of Annex Vb (Part-ML) to that Regulation for those aircraft listed in the attached terms of approval. CONDITIONS: 1. This approval is limited to that specified in the scope of work section of the approved maintenance organisation exposition as referred to in Section A of Annex II (Part- 145), and 2. This approval requires compliance with the procedures specified in the approved maintenance organisation exposition, and 3. This approval is valid whilst the approved maintenance organisation remains in compliance with Annex II (Part-145) of Regulation (EU) N° 1321/2014. 4. Subject to compliance with the foregoing conditions, this approval shall remain valid for an unlimited duration unless the approval has previously been surrendered, superseded, suspended or revoked. Date of original issue: 01 January 2021 Date of this revision: -- Revision N°: Initial Signed: For the European Union Aviation Safety Agency
Transcript of MAINTENANCE ORGANISATION APPROVAL CERTIFICATE · 2021. 1. 5. · allied signal t-62t-40c11 allied...
-
Page 1 of 3
EASA Form 3 – 145 Issue 4
MAINTENANCE ORGANISATION APPROVAL CERTIFICATE
Reference: EASA.UK.145.01427
Pursuant to Regulation (EU) N° 2018/1139 of the European Parliament and of the Council and to Commission Regulation (EU) N°1321/2014 and subject to the conditions specified below, the European Union Aviation Safety Agency hereby certifies:
FAO SERVICES LIMITED
77 OAK GROVE POYNTON
STOCKPORT CHESHIRE SK12 1AD
UNITED KINGDOM
as a maintenance organisation in compliance with Section A of Annex II (Part-145) of Regulation (EU) N° 1321/2014, approved to maintain the products, parts and appliances listed in the attached terms of approval and issue related certificates of release to service using the above references and, when stipulated, to issue recommendations and airworthiness review certificates after an airworthiness review as specified in point ML.A.0903 of Annex Vb (Part-ML) to that Regulation for those aircraft listed in the attached terms of approval.
CONDITIONS:
1. This approval is limited to that specified in the scope of work section of the approved maintenance organisation exposition as referred to in Section A of Annex II (Part-145), and
2. This approval requires compliance with the procedures specified in the approved maintenance organisation exposition, and
3. This approval is valid whilst the approved maintenance organisation remains in compliance with Annex II (Part-145) of Regulation (EU) N° 1321/2014.
4. Subject to compliance with the foregoing conditions, this approval shall remain valid for an unlimited duration unless the approval has previously been surrendered, superseded, suspended or revoked.
Date of original issue: 01 January 2021
Date of this revision: --
Revision N°: Initial
Signed: For the European Union Aviation Safety Agency
-
Page 2 of 3
MAINTENANCE ORGANISATION TERMS OF APPROVAL
Reference: EASA.UK.145.01427
Organisation: FAO SERVICES LIMITED
77 OAK GROVE, POYNTON, STOCKPORT, CHESHIRE, SK12 1AD, UNITED KINGDOM
UNIT 8, KINGSGATE BUSINESS PARK, HONITON, DEVON, EX14 8YD, UNITED KINGDOM
EASA Form 3 – 145 Issue 4
CLASS RATING LIMITATION
ENGINES B1 Turbine Boroscope Inspection of Gas Turbine Engines in accordance with the manufacturer’s instructions on the following types: CFMI CFM56-3 SERIES CFMI CFM56-5 SERIES CFMI CFM56-5B SERIES CFMI CFM56-5C SERIES CFMI CFM56-7B SERIES CFMI LEAP-1A/1C SERIES GE CF34-3 SERIES GE CF34-8 SERIES GE CF34-10E HONEYWELL AS 907 HONEYWELL TFE731 IAE V2500 SERIES PRATT & WHITNEY PW100 SERIES PRATT & WHITNEY PW150 SERIES ROLLS ROYCE AE3007 SERIES ROLLS ROYCE BR700-710 SERIES ROLLS ROYCE BR211-535 SERIES ROLLS ROYCE TRENT 700 SERIES ROLLS ROYCE TRENT 1000 SERIES WILLIAMS FJ33/FJ44
B3 APU Boroscope Inspection of Auxiliary Power Units in accordance with the manufacturer’s instructions on the following types: ALLIED SIGNAL AS 131-9 ALLIED SIGNAL AS 331 ALLIED SIGNAL T-62T-40C11 ALLIED SIGNAL T-62T-40C14 ALLIED SIGNAL AS 131-9 HAMILTON SUNDSTRAND APS 1000T-62T-46C12 HAMILTON SUNDSTRAND APS2000 HAMILTON SUNDSTRAND APS2300 HAMILTON SUNDSTRAND APS3200
-
Page 3 of 3
MAINTENANCE ORGANISATION TERMS OF APPROVAL
Reference: EASA.UK.145.01427
Organisation: FAO SERVICES LIMITED
77 OAK GROVE, POYNTON, STOCKPORT, CHESHIRE, SK12 1AD, UNITED KINGDOM
UNIT 8, KINGSGATE BUSINESS PARK, HONITON, DEVON, EX14 8YD, UNITED KINGDOM
EASA Form 3 – 145 Issue 4
CLASS RATING LIMITATION
COMPONENTS OTHER THAN ENGINES OR APU’s
C4 Doors-Hatches C6 Equipment C7 Engine – APU C8 Flight Controls C10 Helicopters – Rotors C18 Protection ice/rain/fire C20 Structural - Composite
Components in accordance with the Capability List defined in the Company MOE Composite and sheet metal repair
This approval schedule is limited to those products, parts and appliances and to the activities specified in the scope of work section of the UK CAA approved maintenance organisation exposition, Maintenance Organisation Exposition reference: FAO SERVICES/MOE
Date of original issue: 26 SEPTEMBER 2019
Date of last revision approved: 07 DECEMBER 2020 Issue N°: 02 Revision N°: 01
Signed: For the European Union Aviation Safety Agency
