MAGNAGLO® and MAGNAVIS® magnetic particle products will help you to tell a harmless scratch from a dangerous crack. The magnetic particle method is used to find defects that are in or just under the surface of ferromagnetic materials. The magnetic particles will gather around the defect, making it easy to locate and repair.

Whether you need to inspect under UV or visible lighting conditions, we have the products to meet your requirements.

Benefits• High sensitivity method for inspecting ferro- magnetic materials.• Easy detection of cracks, surface-breaking flaws and subsurface flaws.• Simple and easy to perform, even in remote locations.• Reliable, fast and economic.• Oil or water suspensions available.• Resists breakdown.• Consistent high performance.• Universal approvals.

ApplicAtionsYou can use our visible magnetic products in a broad range of industrial applications. Here are a few examples:

Aerospace industry:• Engine components• Landing gear• Wheels• Wing spars• Brakes• Springs

Automotive components:• Brakes• Steering components• Connecting rods• Wheels• Engine mounts• Pistons• Cylinder blocks

Other examples:• Foundry castings and forgings• Critical military components• Rail components• Offshore oil and gas• Weld inspections• Pipelines

equipmentOur products are backed up by a full range of NDT-certified equipment and accessories. From small portable units to heavy-duty test benches, we have the gear to help improve and expand your magnetic particle testing capabilities.

To find out more, visit eu.magnaflux.com.

MAGNAGLO® and MAGNAVIS®

Magnetic Particle Inspection

mAgnAglo® - fluorescent mpi

Powder concentrates used to prepare fluorescent ink for wet method magnetic particle inspection testing.

powder mean particle size (µm)

settlement volume (ml) Specification compliance product availability and

part numbers

MAGNAGLO 14A 5 - 12 0.15 - 0.25 • AMS3044• ASME B & PV Code, Sec V• ASTM E1444/E1444M• ASTM E709• EN ISO 9934-2• MIL-STD-2132D• MIL-STD-271F• Rolls Royce RRP 58004 (CSS 231)• SAFRAN In 5300

059C025059C026

MAGNAGLO MG 410

14 - 22 0.05 - 0.15(1 hour)

• ASME B & PV Code, Sec V• ASTM E709• MIL-STD-2132D• MIL-STD-271F• NAVSEA 250-1500-1• SAFRAN In 5300

057C036

MAGNAGLO MG 601

(top-up for MAGNAGLO

WB-655)

3 - 5 0.1 - 0.2 • AMS3044• ASME B & PV Code, Sec V• ASTM E1444/E144M• ASTM E709• EN ISO 9934-2• KTA 3905• MIL-STD-2132D• MIL-STD-271F

059C030

Ready-to-use, oil-based fluorescent inks for wet method magnetic particle testing.

ink mean particle size (µm)

settlement volume (ml) Specification compliance product availability and

part numbers

MAGNAGLO 14HF

5 - 12 0.15 - 0.25(1 hour)

• AMS2641• AMS3044• AMS3045• AMS3046 (Aerosols only)• ASME B & PV Code, Sec V• ASTM E709• ASTM E1444/E1444M• EN ISO 9934-2• MIL-STD-2132D• Rolls Royce RRP 58004 (CSS 231)• SAFRAN In 5300• SNECMA DMR70-520

008A105 (x 10) 058C006 (x 4) 058C007

MAGNAGLO 410HF

14 - 22 0.05 - 0.15(1 hour)

• AMS2641B• ASME B & PV Code, Sec V• ASTM E709• MIL-STD-2132D• SAFRAN In 5300

008A106 (x 10) 058C016 (x 4)

mAgnAglo® - fluorescent mpi

Water-based liquid concentrates used to prepare water-based fluorescent ink for wet method magnetic particle testing.

ink mean particle size (µm)

settlement volume (ml) after 1 hour Specification compliance product availability and

part numbers

MAGNAGLO WB-12

5 - 12 0.1 - 0.4ml (at 20ml/litre)

Manufactured to ca 0.2ml

(at 20ml/litre)

• AMS3044• ASME B & PV Code, Sec V• ASTM E1444/E1444M• EN ISO 9934-2• Rolls Royce RRP 58004 (CSS 231)• SAE AS4792

058C033 (x6)

MAGNAGLO WB-655

3 - 5 0.21ml (1:40 ratio)

0.13 ml(1:60 ratio)

• AFNOR NF A 09-125• AMS3044• ASME B & PV Code, Sec V• ASTM E1444/1444M• ASTM E709• DIN 54132• EN ISO 9934-2• MIL-STD-2132D• MIL-STD-271F• NAVSEA 250-1500-1• SAE AS4792

058C041 058C042

oil vehicle Oil-based carrier fluid used for the suspension of all Magnaglo and wet method magnetic particles.

carrier flash point (oc)

viscosity(mm2/s)

Density (g/cm3) Specification compliance product availability and

part numbers

MAGNAGLO MG-MX Carrier II

> 93 2.5 0.80 • A-A-59230• AMS2641• ASME B & PV Code, Sec V• ASTM D93• ASTM E1444/E1444M• ASTM E709• MIL-STD-2132D• NAVSEA T9074-AS-GIB-010/271• Pratt & Whitney PMC 1887-1

058C024058C028

WAter BAth ADDitivesAdditive Description ph Density

(g/cm3)Specification compliance

product availability

MAGNAFLUX® WA-1

Water conditioner; surface wetting; corrosion inhibition; anti-foam characteristics.

9.05 1.085 SAE AS4792

064C002

MAGNAFLUX® WA-2

Anti-foam 6.5 - 7.5 1.0 - 1.1 -

064C005

Faraday Road, South Dorcan Industrial Estate, Swindon, SN3 5HE, UK T + 44 (0)1793 524566 E sales@magnaflux.co.ukBahnhofstr 94-98, 73457 Essingen, Germany T +49 (0) 7365 81-0 E sales@magnaflux.com.de

P.O. Box 530, 651 12 Karlstad, Sweden T +46 54 29 39 50 E info@magnaflux.se

mAgnAvis® - visible mpiDry method colour-contrast magnetic powders

powder colour mean particle size (µm) Specification compliance product availability and

part numbers

MAGNAVIS 1 Grey Off-white/grey 180 • AMS3040• ASME B & PV Code, Sec V• ASTM E709• ASTM E1444/E1444M• MIL-STD-2132D• MIL-STD-271F• NAVSEA T9074-AS-GIB-010/271

057C004 057C005

MAGNAVIS 3A Black Blue-black 180 057C008 057C057

MAGNAVIS 8A Red Dark red 180 057C066 057C067

Oil-based black ink for wet method magnetic particle testing.

ink mean particle size (µm)

settlement volume (ml) Specification compliance product availability and

part numbers

MAGNAVIS 7HF

0.2 - 2 1.5 - 2.4(1 hour)

• AMS2641• AMS3041• AMS3043 (Aerosols only)• ASME B & PV Code, Sec V• ASTM E709• ASTM E1444/E1444M• EN ISO 9934-2• MIL-STD-2132D

008A103 (x 10) 058C001 (x 4)

Water-based liquid concentrate used to prepare water-based black ink for wet method magnetic particle testing.

concentrate mean particle size (µm)

settlement volume (ml) Specification compliance product availability

and part number

MAGNAVIS WB-27

0.2 - 2 1.5 - 2.4(1 hour)

• AMS3042• ASME B & PV Code, Sec V• ASTM E709• ASTM E1444/E1444M• EN ISO 9934-2

• MIL-STD-271F• MIL-STD-2132D• NAVSEA 250-1500-1• SAE AS4792

058C036 (x 6)

White contrAst pAint Ready-to-use, rapid-drying contrast paint - provides a white background to enhance particle indications.

paint flash point (oc) viscosity(mm2/s)

Density (g/cm3) Specification compliance product availability and

part numbers

MAGNAVIS WCP-2

-40 (aerosol)-18 (bulk product)

< 20 0.93 • ASME B & PV Code, Sec V• EN ISO 9934-1• EN ISO 9934-2

008A009 (x 10) 055C027 (x 4)

www.eu.magnaflux.com

www.eu.magnaflux.com