Magnet drive gear pumps MG300 series€¦ · Operating range with ferrite driving magnet Operating...
4
www.fluidotech.com The MG300 series magnet drive gear pumps are compact precision performance pumps for a wide range of specialized applications. Thanks to the improved design, the MG300 series grant a more accurate and uniform delivery regardless of the fluid temperature. The seal less design with the magnetic transmission of the rota- tion is guarantee of a leak proof product. Static seals are available in PTFE ™ / NBR / VITON ® / EPDM / SILI- CON, in order to guarantee the highest chemical compatibility with a wide range of fluids. The housing of the pump and the internal metal parts are in AISI 316 L stainless steel while gears and bushings are available in Peek ™ , Ceramic Peek ™ or PTFE ™ . In operation the MG300 series pumps are noiseless, pulsation- free and capable of handling relatively high temperature liquids (up to 120 °C or 248 °F) with low coefficient of expansion. Operation at different pressures ranges is possible thanks to a choice of materials for the magnets. Available upon request: • Rare earths driven magnet • Medical and surgical equipment • Hemodialysis apparatus • Laser apparatus • Lubrication • Ink-Jet printing systems • Cooling systems • Laboratory instrumentation • Water treatment • Sampling • Food processing equipment MAIN APPLICATIONS Magnet drive gear pumps MG300 series Ø 56 (Ø 2.20 in) Ø 51 (Ø 2.01in) (6x)Ø 3.5 (6x)Ø 0.14 in 1.2 (0.05 in) Ø 27 (Ø 1.06 in) 17.5 (0.69 in) 66-80 (1.89 in - 2.48 in) (1.59 in-3.15 in) 48-63 15.2 (0.59 in) Ø 40 (Ø 1.57 in) Ø 45 (Ø 1.77 in) (2x)Ø 1/8” NPT Ø 44.5±0.05 (Ø 1.75 in±0.002) Dimensions in mm/inches * Priming ability varies with operating conditions and fluid characteristics TECHNICAL INFORMATION Pump housing material Stainless steel Gears and bushing materials Ports 1/8” GAS or NPT Pump weight (MG304) 514 g (1.1 lb) Speed limit 5.000 rpm Max static pressure 20 bar/290 psi Peek ™ -45 to 120 °C/-49 to 248 F PTFE ™ -45 to 50 °C/-49 to 122 F Ceramic Peek ™ -45 to 120 °C/-49 to 248 F 724 mmHg/28.5 inHg ~ 8m/26.7 ft Max vacuum *Wet lift with water Temperature range Peek ™ /Ceramic Peek ™ /PTFE ™
Transcript of Magnet drive gear pumps MG300 series€¦ · Operating range with ferrite driving magnet Operating...
www.fluidotech.com
The MG300 series magnet drive gear pumps are compact precision performance pumps for a wide range of specialized applications. Thanks to the improved design, the MG300 series grant a more accurate and uniform delivery regardless of the fluid temperature. The seal less design with the magnetic transmission of the rota-tion is guarantee of a leak proof product. Static seals are available in PTFE™ / NBR / VITON®/ EPDM / SILI-CON, in order to guarantee the highest chemical compatibility with a wide range of fluids. The housing of the pump and the internal metal parts are in AISI 316 L stainless steel while gears and bushings are available in Peek™, Ceramic Peek™ or PTFE™.In operation the MG300 series pumps are noiseless, pulsation-free and capable of handling relatively high temperature liquids (up to 120 °C or 248 °F) with low coefficient of expansion. Operation at different pressures ranges is possible thanks to a choice of materials for the magnets.
Available upon request:• Rare earths driven magnet • Medical and surgical equipment
• Hemodialysis apparatus
• Laser apparatus
• Lubrication
• Ink-Jet printing systems
• Cooling systems
• Laboratory instrumentation
• Water treatment
• Sampling
• Food processing equipment
MAIN APPLICATIONS
Magnet drive gear pumps MG300 series
Ø 56(Ø 2.20 in)
Ø 51(Ø 2.01in)
(6x)Ø 3.5(6x)Ø 0.14 in
1.2(0.05 in)
Ø 2
7(Ø
1.0
6 in
)
17.5(0.69 in)
66-80
(1.89 in - 2.48 in)
(1.59 in-3.15 in)
48-63
15.2(0.59 in)
Ø 4
0(Ø
1.5
7 in
)
Ø 4
5(Ø
1.7
7 in
)
(2x)Ø 1/8” NPT
Ø 44.5±0.05(Ø 1.75 in±0.002)
Dimensions in mm/inches
* Priming ability varies with operating conditions and fluid characteristics
TECHNICAL INFORMATION
Pump housing material Stainless steel
Gears and bushing materials
Ports 1/8” GAS or NPT
Pump weight (MG304) 514 g (1.1 lb)
Speed limit 5.000 rpm
Max static pressure 20 bar/290 psi
Peek™ -45 to 120 °C/-49 to 248 F
PTFE™ -45 to 50 °C/-49 to 122 F
Ceramic Peek™ -45 to 120 °C/-49 to 248 F
724 mmHg/28.5 inHg
~ 8m/26.7 ft
Max vacuum
*Wet lift with water
Temperature range
Peek™/Ceramic Peek™/PTFE™
Operating range with ferrite driving magnetOperating range with rare earth driving magnet
A = 1 cSt B = 20 cSt C = 75 cSt D = 160 cSt E = 200 cSt
GPH
PSI
l/h
0
109876543210
40
35
30
25
20
15
10
5
0
MG304 @ 1725 RPM
MG304 @ 2900 RPM
MG304 @ 3450 RPM MG309 @ 3450 RPM MG313 @ 3450 RPM
MG309 @ 2900 RPM MG313 @ 2900 RPM
MG309 @ 1450 RPM
MG309 @ 1725 RPM MG313 @ 1725 RPM
MG304 @ 1450 RPM MG313 @ 1450 RPM
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
E
DC
BA
GPH l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
01 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
262422201816141210
86420
100
90
80
70
60
50
40
30
20
10
01 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
3028262422201816141210
86
120
110
100
90
80
70
60
50
40
30
201 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
52504846444240383634323028
200
190
180
170
160
150
140
130
120
110
1001 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
60585654525048464442403836
230
220
210
200
190
180
170
160
150
140
1201 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH
PSI
l/h
0
109876543210
40
35
30
25
20
15
10
5
0
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
ED
C
B
A
GPH
PSI
l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
0
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
D
C
B
A
GPH
PSI
l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
0
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
C
B
A
GPH l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
01 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
3432302826242220181614
130
120
110
100
90
80
70
60
501 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
3432302826242220181614
GPH l/h
0
130
120
110
100
90
80
70
60
501 2 3 4 5 6 7 8 9 10 BAR
CB
A
PSI0 20 40 60 80 100 120 140
0 1 2 3 4 5 6 7 8 9 100
102030405060708090
100110120130
02468
10121416182022242628303234
0 20 40 60 80 100 120 140
BAR
PSI
0 1 2 3 4 5 6 7 8 9 10102030405060708090
100110120130140
468
1012141618202224262830323436
0 20 40 60 80 100 120 140
0 1 2 3 4 5 6 7 8 9 10110120130140150160170180190200210220230240
3032343638404244464850525456586062
0 20 40 60 80 100 120 140
0 1 2 3 4 5 6 7 8 9 10160170180190200210220230240250260270280290300
444648505254565860626466687072747678
0 20 40 60 80 100 120 140
MG317 @ 1450 RPM
B
A
GPH l/h
MG317 @ 1750 RPM
A
B
A
BAR
PSI
BAR
PSI
MG317 @ 2900 RPM
MG317 @ 3450 RPM
BAR
PSI
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
GPH l/h
Flow rateGPH l/h
Flow rate
Pressure
GPH l/h
Flow rate
Pressure
Pressure
A = 1 cSt B = 20 cSt C = 75 cSt D = 160 cSt E = 200 cSt
GPH
PSI
l/h
0
109876543210
40
35
30
25
20
15
10
5
0
MG304 @ 1725 RPM
MG304 @ 2900 RPM
MG304 @ 3450 RPM MG309 @ 3450 RPM MG313 @ 3450 RPM
MG309 @ 2900 RPM MG313 @ 2900 RPM
MG309 @ 1450 RPM
MG309 @ 1725 RPM MG313 @ 1725 RPM
MG304 @ 1450 RPM MG313 @ 1450 RPM
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
E
DC
BA
GPH l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
01 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
262422201816141210
86420
100
90
80
70
60
50
40
30
20
10
01 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
3028262422201816141210
86
120
110
100
90
80
70
60
50
40
30
201 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
52504846444240383634323028
200
190
180
170
160
150
140
130
120
110
1001 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
60585654525048464442403836
230
220
210
200
190
180
170
160
150
140
1201 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH
PSI
l/h
0
109876543210
40
35
30
25
20
15
10
5
0
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
ED
C
B
A
GPH
PSI
l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
0
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
D
C
B
A
GPH
PSI
l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
0
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
C
B
A
GPH l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
01 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
3432302826242220181614
130
120
110
100
90
80
70
60
501 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
3432302826242220181614
GPH l/h
0
130
120
110
100
90
80
70
60
501 2 3 4 5 6 7 8 9 10 BAR
CB
A
PSI0 20 40 60 80 100 120 140
0 1 2 3 4 5 6 7 8 9 100
102030405060708090
100110120130
02468
10121416182022242628303234
0 20 40 60 80 100 120 140
BAR
PSI
0 1 2 3 4 5 6 7 8 9 10102030405060708090
100110120130140
468
1012141618202224262830323436
0 20 40 60 80 100 120 140
0 1 2 3 4 5 6 7 8 9 10110120130140150160170180190200210220230240
3032343638404244464850525456586062
0 20 40 60 80 100 120 140
0 1 2 3 4 5 6 7 8 9 10160170180190200210220230240250260270280290300
444648505254565860626466687072747678
0 20 40 60 80 100 120 140
MG317 @ 1450 RPM
B
A
GPH l/h
MG317 @ 1750 RPM
A
B
A
BAR
PSI
BAR
PSI
MG317 @ 2900 RPM
MG317 @ 3450 RPM
BAR
PSI
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
GPH l/h
Flow rateGPH l/h
Flow rate
Pressure
GPH l/h
Flow rate
Pressure
Pressure
Note: Characteristics with water at 20 °C (68 F) and without relief valve. Use filter before pump inlet not larger than 10 micron. Temperature requirements different from ambient temperature must be mentioned on the order. Different materials available upon request.
A = 1 cSt B = 20 cSt C = 75 cSt D = 180 cSt E = 210 cSt
www.fluidotech.com
Operating range with ferrite driving magnetOperating range with rare earth driving magnet
Magnet drive gear pumps MG300 series
A = 1 cSt B = 20 cSt C = 75 cSt D = 160 cSt E = 200 cSt
GPH
PSI
l/h
0
109876543210
40
35
30
25
20
15
10
5
0
MG304 @ 1725 RPM
MG304 @ 2900 RPM
MG304 @ 3450 RPM MG309 @ 3450 RPM MG313 @ 3450 RPM
MG309 @ 2900 RPM MG313 @ 2900 RPM
MG309 @ 1450 RPM
MG309 @ 1725 RPM MG313 @ 1725 RPM
MG304 @ 1450 RPM MG313 @ 1450 RPM
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
E
DC
BA
GPH l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
01 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
262422201816141210
86420
100
90
80
70
60
50
40
30
20
10
01 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
3028262422201816141210
86
120
110
100
90
80
70
60
50
40
30
201 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
52504846444240383634323028
200
190
180
170
160
150
140
130
120
110
1001 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
60585654525048464442403836
230
220
210
200
190
180
170
160
150
140
1201 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH
PSI
l/h
0
109876543210
40
35
30
25
20
15
10
5
0
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
ED
C
B
A
GPH
PSI
l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
0
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
D
C
B
A
GPH
PSI
l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
0
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
C
B
A
GPH l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
01 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
3432302826242220181614
130
120
110
100
90
80
70
60
501 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
3432302826242220181614
GPH l/h
0
130
120
110
100
90
80
70
60
501 2 3 4 5 6 7 8 9 10 BAR
CB
A
PSI0 20 40 60 80 100 120 140
0 1 2 3 4 5 6 7 8 9 100
102030405060708090
100110120130
02468
10121416182022242628303234
0 20 40 60 80 100 120 140
BAR
PSI
0 1 2 3 4 5 6 7 8 9 10102030405060708090
100110120130140
468
1012141618202224262830323436
0 20 40 60 80 100 120 140
0 1 2 3 4 5 6 7 8 9 10110120130140150160170180190200210220230240
3032343638404244464850525456586062
0 20 40 60 80 100 120 140
0 1 2 3 4 5 6 7 8 9 10160170180190200210220230240250260270280290300
444648505254565860626466687072747678
0 20 40 60 80 100 120 140
MG317 @ 1450 RPM
B
A
GPH l/h
MG317 @ 1750 RPM
A
B
A
BAR
PSI
BAR
PSI
MG317 @ 2900 RPM
MG317 @ 3450 RPM
BAR
PSI
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
GPH l/h
Flow rateGPH l/h
Flow rate
Pressure
GPH l/h
Flow rate
Pressure
Pressure
A = 1 cSt B = 20 cSt C = 75 cSt D = 160 cSt E = 200 cSt
GPH
PSI
l/h
0
109876543210
40
35
30
25
20
15
10
5
0
MG304 @ 1725 RPM
MG304 @ 2900 RPM
MG304 @ 3450 RPM MG309 @ 3450 RPM MG313 @ 3450 RPM
MG309 @ 2900 RPM MG313 @ 2900 RPM
MG309 @ 1450 RPM
MG309 @ 1725 RPM MG313 @ 1725 RPM
MG304 @ 1450 RPM MG313 @ 1450 RPM
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
E
DC
BA
GPH l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
01 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
262422201816141210
86420
100
90
80
70
60
50
40
30
20
10
01 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
3028262422201816141210
86
120
110
100
90
80
70
60
50
40
30
201 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
52504846444240383634323028
200
190
180
170
160
150
140
130
120
110
1001 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
60585654525048464442403836
230
220
210
200
190
180
170
160
150
140
1201 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH
PSI
l/h
0
109876543210
40
35
30
25
20
15
10
5
0
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
ED
C
B
A
GPH
PSI
l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
0
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
D
C
B
A
GPH
PSI
l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
0
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
C
B
A
GPH l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
01 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
3432302826242220181614
130
120
110
100
90
80
70
60
501 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
3432302826242220181614
GPH l/h
0
130
120
110
100
90
80
70
60
501 2 3 4 5 6 7 8 9 10 BAR
CB
A
PSI0 20 40 60 80 100 120 140
0 1 2 3 4 5 6 7 8 9 100
102030405060708090
100110120130
02468
10121416182022242628303234
0 20 40 60 80 100 120 140
BAR
PSI
0 1 2 3 4 5 6 7 8 9 10102030405060708090
100110120130140
468
1012141618202224262830323436
0 20 40 60 80 100 120 140
0 1 2 3 4 5 6 7 8 9 10110120130140150160170180190200210220230240
3032343638404244464850525456586062
0 20 40 60 80 100 120 140
0 1 2 3 4 5 6 7 8 9 10160170180190200210220230240250260270280290300
444648505254565860626466687072747678
0 20 40 60 80 100 120 140
MG317 @ 1450 RPM
B
A
GPH l/h
MG317 @ 1750 RPM
A
B
A
BAR
PSI
BAR
PSI
MG317 @ 2900 RPM
MG317 @ 3450 RPM
BAR
PSI
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
Flow rate
Pressure
GPH l/h
Flow rateGPH l/h
Flow rate
Pressure
GPH l/h
Flow rate
Pressure
Pressure
Note: Characteristics with water at 20 °C (68 F) and without relief valve. Use filter before pump inlet not larger than 10 micron. Temperature requirements different from ambient temperature must be mentioned on the order. Different materials available upon request.
A = 1 cSt B = 20 cSt C = 75 cSt D = 180 cSt E = 210 cSt
Fluid-o-Tech Int’l Inc.161 Atwater St.,
06479 Plantsville CT (USA)Tel. +1 (860) 276-9270Fax +1 (860) [email protected]
Fluid-o-Tech Int’l Inc. Japan203, 2-17-19, Ebara, Shinagawa
Tokyo 142-0063, JapanTel. +81 (0) (3) 3783-9660Fax +81 (0) (3) 3783-9661
Fluid-o-Tech Asia (Beijing) Co., Ltd Jingwei Industrial Zone,
Beifang Huairou, Beijing, 101400, PRCTel. +86 (0) (10) 61684650Fax +86 (0) (10) 61684651 [email protected]
Fluid-o-Tech srl Via Leonardo da Vinci, 40
20094 Corsico, Milano, ItalyTel. +39 02 999501
Fax +39 02 [email protected]
Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice.
MG300 en – 05/12 Ed.
MODEL NUMBER MATRIX
* Other materials available upon request
Position 1 2 3 4 5 6 7 8 Customization
Code MG 3 04 X D 0 P S 00000
POS POSDESCRIPTION CODE DESCRIPTION CODE
1
2
3
5
6
7
8
Driven magnet
Pump series
Gear width in mm(Nominal displacement)
MG = ferrite MS = rare earths
3 = with o-ring
09 = 9 mm (0.6 ml/rev)
04 = 4 mm (0.3 ml/rev)
13 = 13 mm (0.9 ml/rev)
17 = 17 mm (1.2 ml/rev)
Type of connections
Relief valve
Gear material
Static seal material
D = 1/8” NPT
0 = without P = Peek™ T = PTFE™
G = Ceramic Peek™
Housing material X = AISI 316L S = SAF 2205 *4
T = PTFE™ E = EPDM
N = NBR S = Silicon
V = Viton®
