MAGIC PIXIE QuiltSize: 51”W x 51”H | Designed by: Marsha Moore | Level: Confident Beginner

FREE PATTERN AVAILABLE ON MICHAELMILLERFABRICS.COM

FABRIC REQUIREMENTS

p.212.704.0774 | info@michaelmillerfabrics.com | www.michaelmillerfabrics.com

FABRIC REQUIREMENTSSKU YARDAGE PER ONE QUILT # OF BOLTS FOR 12 KITS # OF BOLTS FOR 24 KITS(A) CM8016 CANDY 1/2 YARD 1 BOLT (6 YARDS) 1 BOLT (12 YARDS)(B) CM8018 CHEER 1/2 YARD 1 BOLT (6 YARDS) 1 BOLT (12 YARDS)(C) CM8017 CHEER 3 YARDS 3 BOLTS (36 YARDS) 5 BOLTS (72 YARDS)(D) CM8020 CHEER 5/8 YARD 1 BOLT (7-1/2 YARDS) 1 BOLT (15 YARDS)(E) CX8019 CHEER 1/2 YARD 1 BOLT (6 YARDS) 1 BOLT (12 YARDS)(F) CX8019 MISTLETOE 1/4 YARD 1 BOLT (3 YARDS) 1 BOLT (6 YARDS)(G) CX8019 CANDY 1/8 YARD 1 BOLT (1-1/2 YARDS) 1 BOLT (3 YARDS)(BINDING) CX3584 PINK 1/2 YARD 1 BOLT (6 YARDS) 1 BOLT (12 YARDS)(BACKING) YOUR CHOICE 3 YARDS 3 BOLTS (36 YARDS) 5 BOLTS (72 YARDS)TOTAL BOLTS NEEDED 13 BOLTS (10 W/O BACK) 17 BOLTS (12 W/O BACK)

WE DO OUR BEST TO MAKE SURE THESE ARE ACCURATE YARDAGES BUT THESE ARE ESTIMATES UNTIL THE FINAL PATTERN IS COMPLETED AND EDITED. THANK YOU.

CM8016 CANDY HOLLYWOOD PIXIES

1/2 YARD

CM8018 CHEERPIXIE ORNAMENTS

1/2 YARD

CM8017 CHEERHOLLYWOOD PIXIE BORDER

3 YARDS

CM8020 CHEER PIXIEWOOD FOREST

5/8 YARD

CX8019 CHEERPIXIE PAISLEY

1/2 YARD

CX8019 MISTLETOEPIXIE PAISLEY

1/4 YARD

CX3584 PINK CLOWN STRIPE

1/2 YARD (BINDING)

CX8019 CANDYPIXIE PAISLEY

1/8 YARD

(BACKING) YOUR CHOICE3 YARDS

Magic !by Marsha Evans Moore

Size: 51” x 51”

(A) Hollywood Pixie Border CM8017 Cheer

3 ¼ yards Cut 4 borders using the border pattern.

B) Hollywood PixiesCM8016 Candy

5/8 yard Cut five large squares on point centered over pixies.

(C) Pixie OrnamentsCM8018 Cheer

3/8 yard Cut 6 WOF x 2” strips. Sub-cut into 24 2” x 9 ½” sashing strips.

D) Pixie PaisleyCM8019 Mistletoe

¼ yard Cut 1 WOF x 4 ¾” strip. With fabric folded in half, sub-cut into 8 4 ¾” x 4 ¾” squares. Cut squares in half diagonally.

(E) Pixie PaisleyCM8019 Cheer

¾ yard Cut 4 WOF x 1 ¼” inner border strips.Cut 3 WOF x 1 ¼” strips. Sub-cut into 96 1 ¼” x 1 ¼” squares.Cut 4 WOF x 1” strips. Sub-cut into 20 frames using the template.

(F) Pixie PaisleyCM8019 Candy

1/8 yard Cut 2 WOF x 2” strips. Sub-cut into 16 2” x 2” sashing squares.

(G) Pixiewood ForrestCM8020 Cheer

½ yard Cut 2 WOF x 4 ¾” strips. With fabric folded in half, sub-cut into 10 4 ¾” x 4 ¾” squares. Cut squares in half diagonally.

(H) Clown StripeCX3584 Pink

5/8 yard

Cut 6 WOF x 2 ½” binding strips.Cut 4 WOF x 1” strips. Sub-cut into 20 frames using template.

Hollywood Pixie Fabrics by Micheal MillerFabrics Yardage Cutting

Additional Requirements: 3 yards Backing fabric (If you wish to use the center of the border fabric as part of the backing, you will only need 1 ¾ yards of backing fabric.), 60” x 60” piece batting, thread to match fabrics, template plastic, rotary cutter, ruler and mat, sewing machine, iron and basic sewing supplies.

Magic! page 2

Cutting1. Make plastic templates for the Large Square 6 1/2” x 6 1/2” which includes seam allowance. Make a template for the Frame. 2. Place the Large square on point on the fabric centering it over the motifs on the Hollywood Pixie fabric. Trace around the template and cut out.

3.Trace the Frame pieces on the WOF strips. Cut out the pieces.

Large Square

4. Cut the pieces listed on the fabric chart.

5. When the inner border is complete (after step 13), measure the edges of the quilt. Draw a pat-tern for the 8” wide border using this measurement for the inner edge. Draw the ends diagonally. Add ¼” seam allowance to all edges. Center the pattern over the Pixie Border and cut the borders.

Length and width of quilt top

8 3/4”

45 degree angle

135 degree angle 135 degree angle

45 degree angle

Border pattern

DirectionsStitch all seams right sides together using ¼” seam allowance.

Making the Pixie Blocks

1. Sew the shorter edge of the frame to a triangle.

2. Sew the longer edge to each side of the large squares.

make 16

make 5 each

make 4 make 5

Magic! page 3

Making the Sashing

1. Draw a diagonal line on the wrong side of each small square.

2. Pin the square to the corner of the sashing strip. Sew along the line.

3. Trim the corners to ¼” from the stitching.

4. Press the small square fabric over the seam to make a triangle.

5. Sew a small square to each corner of the sashing strips in the same manner.

Assembling the Quilt Top(see Quilt Layout Diagram on page 4)

1. Arrange the blocks in 3 rows of 3 blocks each alternating the Pixies and the Forrest Blocks. Place a sashing strip on each side of the blocks. Place a sashing square at the corners of the blocks.

2. Stitch the blocks and sashing strips together.

3. Stitch the sashing strips and sashing squares together.

4. Stitch the rows of blocks and sashing rows together to make the quilt center.

5. Measure the side edges of the quilt. Cut two inner strips this length. Sew them to the sides of the quilt.

6. Measure the top and bottom edges of the quilt. Cut two inner border strips this length. Sew them to the top and bottom of the quilt.

7. Sew the borders to the edges of the quilt beginning and ending the stitching ¼” from the edge of the fabric.

8. Sew the diagonal ends of the borders together.

Layer, Quilt and Bind.

make 24

Magic! page 4 Quilt Layout Diagram

Frame

Template