Muhammad Adam Current Address:

Hayal Maseef Riyadh Saudi Arabia. +966598787679

Current Address: Permanent Address 1206/B Mumtazbad Coloy Multan. Email:engr.adam@gmail.com

Career ProfileI started my carrer in 2007 with Shanghai Telecom as RF Engineer for Zong project in central region of Pakistan.After 1 year I got a position of RF Optimization Engineer in Zong on 2G Technology . In January 2010 I switched to Telenor as RF Executive during this period i worked on NSN as Planning and Optimization Engineer. In 2011 August I got my first international contract of South Africa as 2G RF Consultant for NSN Vodacom, 2012 worked as RF Consultant for NSN Mobily Saudi Arabia. 2013 worked as RF Consultant NSN ZAIN IRAQ. 2013/2014 2G/3G RF Optimization Engineer in ZTE Telenor Project Central Region Pakistan.

Expereince Profile

RF professional with 7 years experience of GSM,GPRS, EDGE ,WCDMA networks based on ZTE, Nokia (BSS S12/S13/S14, Flexi BTS, RG10,RG20,RG30 GPRS, EDGE and AMR Enabled Dual Band Network 900/1800, NETACT 4.2/ 5.2) and ZTE (OMCZXG10, V3 ,V4 BSCs and latest NetNuemen EMS clients ). Extensive Experience in Vendor SWAPs Motorola, Ericsson,NSN,ZTE. Excellent working knowledge of Microsoft Excel. ACADEMICS

Bachelors in Computer Systems Engineering2002 to 2006

JOB EXPERIENCE

SEP 2014-AUG 2015

3G RF OPTIMIZATION ENGINEER ZTE TELENOR PROJECT.

Regular Optimization Activities To meet the agreed KPIs on the cluster level .To support the customer in daily tasks of

optimization. Daily KPI’s monitoring (RRC Success Rate,RAB Blocking and drop rate, R99 , HSDPA establishment

Success Rate) and troubleshooting of the worst cells. 3g Rollout sites pre-launch optimization. Scrambling Code Planning of new and existing sites. Reduce the Code congestion, CE blocking by shifting the traffic. IRAT HO improvement by modification of 2D/2F/3A setting. HSDPA and HSUPA throughput improvement. Cell coverage reduction by QRxlevelmin and QQualmin value. Worst cell optimization on the basis of high access failure rate (including RRC&RAB failures) , high drop

rate ,intra frequency and IRAT failures etc Analyzing log file(RxLev, RxQual,CPICH RSCP, CPICH EcNo, Pilot Pollution) with Subcon coordinator to

locate the bad patches and low throughput areas. Addition or deletion of neighbor cells in order to improve the clusters. (3G-3G/3G-2G)

Recommending the Physical changes (mainly up/down tilts, azimuth) to optimize the network.

Swapped feeders Checking and pushing the integration teams to resolve this.

MUHAMMAD ADAM

JUNE 2014-SEP 2014

NOKIA SEIMENS NETWOKS KSA AS CONSULTANT

2G RF OPTIMIZATION ENGINEER ERICSON TO NSN MOBILY SWAP PROJECT

Regular Optimization Activities To meet the agreed KPIs on the cluster level .To support the customer in daily tasks of

optimization. Daily KPI’s monitoring (CSSR, DCR ,HOSR, etc) and troubleshooting of the worst cells. TRX level report analysis to troubleshoot degraded HOSR cells and DCR cells.

Pathloss min max change to shift the traffic b/w 900 and 1800.

DCR improvement by shifting traffic to low DCR cells.

Power control parameters modification to reduce interference and same time improving DCR and HOSR.

MARCH 2013- JUNE2014

RF OPTIMIZATION ENGINEER NSN TO ZTE TELENOR SWAP PROJECT.

Regular Optimization Activities To meet the agreed KPIs on the cluster level .To support the customer in daily tasks of

optimization. Daily KPI’s monitoring (CSSR, DCR ,HOSR,IRAT HOSR, RAB Blocking,   etc) and troubleshooting of the

worst cells. Responsible for reducing congestion and drops, improving the Handover, CSSR in the designated

area, issuing capacity requests whenever needed.

Routine neighbor audit of BSCs, analysis of per neighbor stats in cells having poor handover performance and to change handover margins.

TRX level report analysis to troubleshoot degraded HOSR cells and DCR cells.

Pathloss min max change to shift the traffic b/w 900 and 1800.

DCR improvement by shifting traffic to low DCR cells.

Power control parameters modification to reduce interference and same time improving DCR and HOSR.

Handover Success improvement on cell level by changing Pbgt,

Adjustments of idle mode boundaries by tweaking ACCMIN, C1, C2.

SDCCH dimensiong for reduced SDCCH congestion.

HR/FR Parameters setting for reduced TCH Blocking improving CSSR

RX Acceslevel setting for traffic shifting.

Improving Data KPIs like TBF drops rate , TBF Allocation Success Rate, DL Blocking and UL Blocking and Throughput.

Interference on band 4 and band 5 reduction by Frequency tuning.

Coordinating with BSS Teams to resolve Issues, such as Handover Failures, Frequency Interference, and Low Power TRXs.

Analysis of routine Drive Test of area assigned or issue-based DT using TEMS investigation(Data collection and route analysis) and prepare DT analysis report with recommendations for dropped calls, bad quality/coverage areas, no-dominance, handover failure issues etc. to improve the performance of the designated area.

MUHAMMAD ADAM

OCT 2012- FEB 2013

2G RF PLANNING & OPTIMIZATION CONSULTANT ERICSSON/MOTOROLA TO NSN SWAP ZAIN IRAQ.

To get acceptance of RF KPIs on Cluster level after swap from Zain Iraq team . Audit of pre and post parameters for swapped sites . Escalation of discrepencies to planning team for

correction. Inter MSC HO analysis and correction of wrong LACs contributing to HO failures. Sector swap detection by analysis of pre and post swap traffic . Escalation of zero PS data cells to operations and care team to rectify. Frequency change where required to improve the KPIs. NeighbourAudit for swapped sites and proposed addition and deletion of neighbours where required. IASR improvement by RACH,and SLO and MAXRetrans Parameters

TCH Blocking improvement by Accesslevel min, CRO, PT, PBGTHO and BTSLOADTHS parameters.

DCR Improvement by Accessmin, TRXpriority shifting, HO Optimization and Frequency cleaning.

SDR improvement by SDCCH Shifting, BSTXPWRMAX, RxAccessmin, T200 and Frequency Tuning.

Improving TBF Success Rate by BFG and TRP and CDED and CDEF parametres.

Routine neighbor audit of BSCs, analysis of per neighbor stats in cells having poor handover performance and to change handover margins.

Handover Success improvement on cell level by changing Pbgt, RxAccesslevelmin,NY1, (Power Budget parameter)

Improving KPIs SDR,CSSR,HOSR by optimizaingPowerControl values in POC table.

Adjustments of idle mode boundaries by tweaking ACCMIN, C1, C2.

HR/FR Parameters setting for reduced TCH Blocking improving CSSR

RX Acceslevel setting for traffic shifting.

Recommendations for newly on-aired sites based on DT performed at the time of commissioning and analysis of Statistical data.

Making XML from plan edit for implementation in BSC.

Escalation of Faulty Hardware to improve KPIs.

Making daily report of Alarms to float in the team .

Making of BSC report for final acceptance after complete swap.

Planning Part:

Planning of new 2g NSN Sites .

Creation of XMLs of TRX , BTS , HOC, POC and GPRS for swap sites.

XMLs preparation for modification of paramters of existing sites.

Mapping of Parameters from Motorla and Ericsson dump for creation of swapped sites.

Pre and Post audit of Dump to verify the mapped parameters.

Problem resolution during MDT of swapped sites.

Frequency Plan and Neighbour planning of new sites.

MAIO Plan of new and swapped sites.

MAL List creation of swapped sites.

DATA KPIs Optimization:

Improving throughput by modifying CDED and CDEF values.

Improving TBF drop rate by modifying coding schemes and Frequency cleaning.

Improving TBF Success rate by BFG and CDED CDED and coding schemes.

MUHAMMAD ADAM

Improving UL and DL blocking KPIs by increasing dedicated data timeslots and enabling more trx with data capability and assigning them to EDAP pool.

APRIL2012-SEPTEMBER 2012

2G RF OPTIMIZATION CONSULTANT MOTOROLA TO NSN SWAP MOBILY MADINAH SAUDI ARABIA.

This project consists on acceptance on cell level for CS and PS KPIs. All sites assigned were got accepted by the customer.

NOV 2011-APRIL2012

ZTE TEAM LEAD CENTRAL3 REGION NPO MS PROJECT CHINA MOBILE PAKISTAN.

Heading Team of 7 Engineers NPO project in Central3 region of Pakistan.

Regular Optimization Activities To meet the agreed 2G KPIs on the monthly basis .To support the customer in daily tasks of

optimization.

MARCH 2010 – JULY 2011

TELENOR PAKISTAN (NOKIA SEIMENSNETWOKS) RF PLANNING AND OPTIMIZATION ENGINEER

Special Projects Trial performed to optimize power control window so as to make sure good RxLev/Rxqual Samples

while ensuring minimum interference.

Restricted overshooting cells coverage areas through parametric adjustment.

Retuned parameters to Push traffic from outer GSM to inner DCS zone in order to Optimize DCS utilization.

Extremely Remote Sites DCR and CSSR Optimization Project

GSM and DCS Layer Utilization Project

HR/FR Utilization improvement Project for better user perception.

Expansions of basis of TCH call setup blocking.

JUNE 08 TILL MARCH 2010

2G RF PLANNING AND OPTIMIZATION ENGINEER CHINA MOBILEPAKISTAN CENTRAL REGION (ZTE)

Special Projects T20 city optimization Project to improve the KPIs of top cities according to agreed SLA.

HR/FR utilization project to shift more traffic on FR.

TRX removal project of Low utilization cells to save the capex and improve the Utilization.

JUNE 07 TILL JUNE 2008

(SHANGHAI TELECOM CMPAK PROJECT )

MUHAMMAD ADAM

RF ENGINEER

TSS of new sites and making TSSR Reports.Area profiling of high congestion and low coverage areas for planning new sites.DT of new sites and trouble shooting of low quality TRX and sector swap.

TRAININGS NSN BSS Dimensioning Training(Duration:3 Days) Nokia Seimens Networks, Pakistan

FINAL YEAR PROJECT

GSM Network Design and Simulation.

TECHNICAL TOOLS

Tools:1. TEMS Investigation 8.1.1 2. Asset 6.13. Optima 4. Net Act5. MAP INFO 8.0 6. GOOGLE EARTH7. Auto Cad9. Plan Edit11. Actix

8. Ericsson MCOM10. SONAR12. OMCR ZTE

13. Minos(ZTE) 14. IBSC ZTE

LANGUAGES

English Urdu