MAD: Out of Hand-Body and Form
-
Upload
kozakartclass -
Category
Education
-
view
166 -
download
5
Transcript of MAD: Out of Hand-Body and Form
![Page 1: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/1.jpg)
3d printin’ style!Art that reimagines how the human body interacts with objects.
![Page 2: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/2.jpg)
Vapor Laser Talon
Running cleat with 3D printed plate
![Page 3: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/3.jpg)
Vapor Laser Talon
Running cleat with 3D printed plate
![Page 4: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/4.jpg)
Vapor Laser Talon
Running cleat with 3D printed plate
“Nike’s new 3D printed plate only weighs 5.6 oz.
It is contoured to allow football athletes to maintain their drive position longer and more efficiently, helping them accelerate faster through the critical first 10 yards of the 40,”
![Page 5: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/5.jpg)
Twisted Dump Truck
2011
Nickel plated steel
Laser cut
![Page 6: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/6.jpg)
Twisted Dump Truck
2011
Nickel plated steel
Laser cut
![Page 7: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/7.jpg)
Twisted Dump Truck
2011
Nickel plated steel
Laser cut
![Page 8: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/8.jpg)
Dump Truck
2011-
Nickel plated steel
Laser cut
![Page 9: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/9.jpg)
“I always put in extra time and patience into a project. This is something that disappeared in art in the 20th century. You still have luxury products — people are happy to buy a Ferrari and admire the extra time put into the product — but in the art world it hasn’t been about the extra time anymore.”
![Page 10: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/10.jpg)
Pneu
2011
Rubber tire
Hand carved
![Page 11: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/11.jpg)
Dump Truck
2-1-
Nickel plated steel
Laser cut
![Page 12: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/12.jpg)
Twisted Dump Truck
2011
Nickel plated steel
Laser cutFinal Comments?
![Page 13: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/13.jpg)
Untitled #5
2008
Pigmented polyurethane
3D scanning, digital modeling, 3D printing, CNC milling, hand
finishing
![Page 14: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/14.jpg)
Do now:
Why do you think artists use nude figures in their
work?
![Page 15: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/15.jpg)
Untitled #5
2008
Pigmented polyurethane
3D scanning, digital modeling, 3D printing, CNC milling, hand
finishing
![Page 16: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/16.jpg)
Multiple works from 2006
Pigmented polyurethane
3D scanning, digital modeling, 3D printing, CNC milling, hand
finishing
“In 2001 I began to turn my body into data…like recording my physiological information.”
![Page 17: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/17.jpg)
![Page 18: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/18.jpg)
“Initially, I wanted to avoid any type of intentional composition. Of
course, that’s impossible—somehow you find a way to make
choices. Even if an item is just dumped in there arbitrarily, it
becomes a gesture and immediately looks like I intended a certain effect. I’m interested in that
line: Where does control end and accident begin? Working this way,
I never know exactly what I’m getting until the end. I love that
there’s always an element of chance.”
![Page 19: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/19.jpg)
![Page 20: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/20.jpg)
Metropol ParasolSeville Spain
2011
![Page 21: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/21.jpg)
Metropol ParasolSeville Spain
2011
![Page 22: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/22.jpg)
Jürgen Mayer seems to be…•Laid back, skeptical about his work and interested in future ideas for
architecture•He’s very peaceful, and calm (not stressed about every little thing)
•Open minded, and not obsessive about his work…and he’s not solipsistic (narcissistic).
•He’s got his mind set on the future as well as the present success of the Metropol Parasol.
•Cares about new things: improvements in technology, and SUSATAINABILITY.
• how well something survives and doesn’t pollute the environment.
• Things that are sustainable: wind power, solar power, huMANNN power.
P3
![Page 23: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/23.jpg)
Jürgen Mayer seems to be…•Calm and humble (not crazy dumb proud of his work)
•Very detail oriented….meticulous…and fastidious.•Not full of himself (not solipsistic )
•He is innovative because: he considers the future of his work. And his architecture is an investment in the
future….an optimistic and HOPEFUL future.•Considers the public opinion before making a
decision. •Proud of his work, but not crazy dumb proud.
•Doesn’t use traditional building techniques…(very few nails…but a whole lotta glue!)
•His innovative use of materials makes the structure ALL THE MORE INTERESTING!
P7
![Page 24: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/24.jpg)
Metropol ParasolSeville Spain
2011
Since the 19th century, an open market was located in this plaza, housed in a market building. The building was partially torn down in 1948 according to plans for urban renewal. But market itself remained until 1973, when the rest of the dilapidated building was finally torn down. The land remained dormant until 1990, when the city decided to construct underground parking with space for a market on top.
However, in the midst of construction, ruins dating to Roman and Andalusian eras were discovered, and construction was frozen after an expenditure of 14 million euros. In 2004 the city decided to attempt to develop the area again, and opened an international competition to solicit bids.
![Page 25: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/25.jpg)
Metropol ParasolSeville Spain
2011
![Page 26: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/26.jpg)
Well?
![Page 27: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/27.jpg)
![Page 28: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/28.jpg)
Why would people choose to come here?
What’s the function of this place?
What’s the equivalent of this in New York City?
What about other cities?
![Page 29: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/29.jpg)
![Page 30: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/30.jpg)
![Page 31: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/31.jpg)
![Page 32: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/32.jpg)
![Page 33: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/33.jpg)
![Page 34: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/34.jpg)
ICD / ITKE Research Pavilion
2011
![Page 35: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/35.jpg)
ICD / ITKE Research Pavilion
2011
![Page 36: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/36.jpg)
ICD / ITKE Research Pavilion
2011
Institute for Computational Design&
Institute of Building Structures and Structural Design
![Page 37: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/37.jpg)
ICD / ITKE Research Pavilion
2011
video
![Page 38: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/38.jpg)
3d printin’ style!
![Page 39: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/39.jpg)
Blackmoldedleathershoe
2011 Vegetable tanned leather
3D scanning, leatherworking
![Page 40: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/40.jpg)
Blackmoldedleathershoe
2011 photopolymer
Digital modeling, 3D printing
![Page 41: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/41.jpg)
3D Printed Gown
2013
![Page 42: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/42.jpg)
3D Printed Gown
2013
![Page 43: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/43.jpg)
The story
This groundbreaking flexible “fabric” printed straight from a computer was the result of countless hours between Mr. Schmidt and the highly expert talents of architect Francis Bitonti. “Francis was able to take my sketches for the dress, which I created specifically for Dita, and render those in the specialized language of the software,” says Mr. Schmidt. “The fluidity of the joints is all 3D-printed, layer upon layer of fine powdered nylon within the preheated chamber, based on information by the CAD file. The laser ‘sinters’ the nylon into form, a process known as select laser sintering, or SLS. It’s an articulated fabric built into the 3D print itself. It’s something that’s never been done. What Francis and Shapeways have achieved here is truly remarkable.”
![Page 44: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/44.jpg)
Vocab: Laser Sintering
This is an additive method for 3D manufacturing where lasers melt a powdered ceramic material together into a solid strucutre.
Sometimes called SLS (selective laser sintering) since it can pinpoint selective areas to create intensely detailed objects.
![Page 45: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/45.jpg)
Vocab: Laser Sintering
![Page 46: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/46.jpg)
Cut Beauty Black Necklace
From “Jointed Jewels” 2011
Digitally modeled, 3D printed, laser sintered
![Page 47: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/47.jpg)
http://www.thingiverse.com/thing:146293
![Page 48: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/48.jpg)
Rapid Racer, 2011
Acryloniterile butadiene styrene
Digitally modeled, 3D printed
![Page 49: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/49.jpg)
Rapid Racer, 2011
Acryloniterile butadiene styrene
Digitally modeled, 3D printed
![Page 50: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/50.jpg)
Rapid Racer, 2011
Acryloniterile butadiene styrene
Digitally modeled, 3D printed
This is the world’s first fully functional vehicle to be 3D-printed in one piece. At 25 ½ lbs, the lightweight form was inspired by the structure of 3D printed lower jawbone implants. Apart from the pinion, wheels, chain, and some screws, the object was created completely in the printer….including the steering wheel and throttle. Made of 3,600 layers of ABS plastic, it took ten days to complete. It is motorized by a cordless power drill.
![Page 51: MAD: Out of Hand-Body and Form](https://reader038.fdocuments.us/reader038/viewer/2022110119/555afc63d8b42a64398b4798/html5/thumbnails/51.jpg)
The Aerion was made in 2012, this car took three
weeks to print from start to finish. Once done, the
remaining pieces (wheels, engine, etc.) were
assembled. In addition to using 3D printing
technology to be made, it also runs on a fully electric drive train, and is made of bio-composite materials.
The car can accelerate from zero to 100 km/hour in just four seconds, and
can maintain a top speed of 141 km/hour on the race
track.