Machine and Equipment List - Trinity Forge
Transcript of Machine and Equipment List - Trinity Forge
Machine andEquipment List
COMPUTER-CONTROLLED HYDRAULIC HAMMERS AUTOMATE THE FORGING PROCESS, ALLOWING FOR NET OR NEAR-NET FORGINGS MANUFACTURED WITH EXTREMELY CONSISTENT MECHANICAL PROPERTIES.
FORGING EQUIPMENT
Category Make and Model Description
Computer-Controlled Hydraulic Hammer Lasco HOU 720 70 Blows per min. | Max. part size 100 lbs.
Computer-Controlled Hydraulic Hammer Lasco HOU 315 90 Blows per min. | Max. part size 20 lbs.
Computer-Controlled Hydraulic Hammer Lasco KH 125 60 Blows per min. | Max. part size 8 lbs.
Computer-Controlled Hydraulic Hammer Lasco KGK 250 60 Blows per min. | Max. part size 20 lbs.
Computer-Controlled Hydraulic Hammer Lasco HOU 400 90 Blows per min. | Max. part size 35 lbs.
Computer-Controlled Hydraulic Hammer Lasco HOU 800 70 Blows per min. | Max. part size 160 lbs.
Computer-Controlled Hydraulic Hammer Lasco KGK 160 60 Blows per min. | Max. part size 12 lbs.
Computer-Controlled Hydraulic Hammer Chambersburg #8Die Forger 90 Blows per min. | Max. part size 8 lbs.
Drop Forging Hammer Chambersburg 6,000CECO 60 Blows per min. | Max. part size 35 lbs.
FORGING EQUIPMENT LIST CONTINUED
• 24 trimming and pre-forming presses (58 – 500 tons)• Automated, conveyor-fed induction heaters• Standard induction heaters• Gas slot furnaces• Billet sawing and shearing machines• Water cooling systems• Air compressors• Roll machines• Tumble shot blasting machines• Vibratory media finisher
IN-HOUSE DIE SHOP
• Vertical and Horizontal CNC Mills• Boring Machines• Surface Grinding Equipment• Radial Drills
MACHINING EQUIPMENT
ModelMake Limits Bar Capacity Units Installed
3" max. 1
1
1
1
1
1
1
4
1
2
1
1
2
QT250Mazak
Mazak
Mazak
Mazak
Mazak
Mazak
Mazak
Makino
Makino
Makino
Hyundai
Hyundai
3.5” max
13.78" max. turn dia. 20.2" max. length
3" max.L300A 19.7" max. turn dia. 29.5" max. length
3.5" max.L300C 22.1" max. turn dia. 29.5" max. length
4" max.QT350 26" 16.5" max. turn dia. 26.7" max. length
4" max.QT350 48" 16.5" max. turn dia. 49.1" max. length
6.5" max.QT450M 23" max. turn dia. 38.6" max. length
4" max.Integrex i400 25.91" max. turn dia. 39.8" max. length
1Mazak HCN4000 15.75" Pallet
VTC 250/50D
3" max.Integrex 3004S 30" max. turn dia. 60" max. length
A99e 2 ton table capacity 31.5" Pallet
V77 2.5 ton table capacity
V56 1,760 lbs. table capacity
HCN6000 19.69" Pallet
LEAST ACHIEVABLE MACHINING TOLERANCES:
Linear Tolerances : 0.0005 inchGeometric Tolerances : 0.0005 inchSurface finish : 20√
ASSEMBLY AND FINISHING
• Welding• Surface Grinding• Hardware affixing stations
TESTING AND QUALITYCONTROL EQUIPMENT
• Magnetic Particle Inspection• Faro Quantum Laser Scan Arm for 3D Scanning• Programmable & Non-programmable CMMs• Faro Gage Arms• Laser and Dot-Peen Telesis Machines• Profilometers
Phone: (817)[email protected]
www.trinityforge.com