gpon olt username and password configuration olt gpon 4 port olt gpon price olt gpon
MA5603T Product Description(GPON)
-
Upload
atia-akbar -
Category
Documents
-
view
360 -
download
0
Transcript of MA5603T Product Description(GPON)
SmartAX MA5603T Optical Access EquipmentV800R006C02
Product Description
Issue 02
Date 2010-01-28
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior writtenconsent of Huawei Technologies Co., Ltd. Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.All other trademarks and trade names mentioned in this document are the property of their respective holders. NoticeThe purchased products, services and features are stipulated by the contract made between Huawei and thecustomer. All or part of the products, services and features described in this document may not be within thepurchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,and recommendations in this document are provided "AS IS" without warranties, guarantees or representationsof any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in thepreparation of this document to ensure accuracy of the contents, but all statements, information, andrecommendations in this document do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.Address: Huawei Industrial Base
Bantian, LonggangShenzhen 518129People's Republic of China
Website: http://www.huawei.com
Email: [email protected]
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
i
About This Document
OverviewSmartAX MA5603T Optical Access Equipment (hereafter referred to as the MA5603T)functions as an optical line terminal (OLT) in an gigabit-capable passive optical network(GPON) network. The MA5603T works with the optical network unit (ONU) or optical networkterminal (ONT) to provide the following GPON access services:
l Fiber to the home (FTTH)
l Fiber to the building (FTTB)
l Base station transmission
l IP private line interconnection
l Multi-ISP wholesale
This document describes the product positioning and features, architecture, ports, protocols,network applications, device management, and technical specifications of the MA5603T.
Product VersionThe following table lists the product versions related to this document.
Product Name Product Version
MA5603T V800R006C02
N2000 BMS V200R012C03
Intended AudienceThe intended audience of this document is as follows:
l Network planning engineers
l Installation and commissioning engineers
l Field maintenance engineers
l Network monitoring engineers
SmartAX MA5603T Optical Access EquipmentProduct Description About This Document
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
iii
l System maintenance engineers
l Data configuration engineers
l Application developers
OrganizationThis document is organized as follows:
Chapter... Describes...
1 Product orientation andFeatures
The orientation, features, and major services provided bythe MA5603T.
2 Product Architecture The functional architecture, software architecture, andhardware architecture of the MA5603T.
3 Ports and Protocols The physical ports, logical interfaces, and supportedprotocols of the MA5603T.
4 Network Applications The typical applications of the MA5603T.
5 Device Management The maintenance and management modes of theMA5603T.
6 Technical Specificationsand Standards Compliance
The technical specifications of the MA5603T.
A Acronyms andAbbreviations
The acronyms and abbreviations used in this document.
Conventions
Symbol Conventions
The following symbols may be found in this document. They are defined as follows.
Symbol Description
Indicates a hazard with a high level of risk, which if notavoided, can result in death or serious injury.
Indicates a hazard with a medium or low level of risk, whichif not avoided, may result in minor or moderate injury.
Indicates a potentially hazardous situation, which if notavoided, may cause equipment damage, data loss,performance degradation, or unexpected results.
About This DocumentSmartAX MA5603T Optical Access Equipment
Product Description
iv Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Symbol Description
Indicates a tip that may help you solve a problem or save yourtime.
Provides additional information to emphasize or supplementimportant points of the main text.
General ConventionsConvention Description
Times New Roman Main text is in Times New Roman.
Boldface The first-level, second-level and third-level section titles are inboldface.
Courier New Alarms and prompts are in Courier New, and the contents areseparated from the main text by using lines at the beginning andthe end.
Terminal Display Information displayed on the screen is in TerminalDisplay. Information contained in the displayed informationand input by users, however, is in Terminal Display.
Command ConventionsConvention Description
Boldface The keywords of a command are in boldface.
Italic Command parameters are in italics.
[ ] Items (keywords or parameters) in square brackets [ ] areoptional.
{ x | y | ... } Alternative items are grouped in braces and separated by verticalbars. One can be selected.
[ x | y | ... ] Alternative items are grouped in square brackets and separatedby vertical bars. One or none can be selected.
{ x | y | ... } * Alternative items are grouped in braces and separated by verticalbars. A minimum of one or a maximum of all can be selected.
[ x | y | ... ] * Alternative items are grouped in square brackets and separatedby vertical bars. Multiple or none can be selected.
SmartAX MA5603T Optical Access EquipmentProduct Description About This Document
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
v
GUI ConventionsConvention Description
Boldface GUI elements such as buttons, menus, parameters, tabs, window,and dialog titles are in boldface. For example, click OK.
> Multi-level menus are separated by >. For example, chooseFile > Create > Folder.
Keyboard ConventionsConvention Description
Key Press the key. For example, press Enter, Tab, Backspace and a.
Key 1 + Key 2 Press the keys concurrently. For example, pressing Ctrl + Alt +A means that the three keys should be pressed concurrently.
Key 1, Key 2 Press the keys in turn. For example, pressing Alt, F means thetwo keys should be pressed in turn.
Mouse ConventionsConvention Description
Click Select and release the primary mouse button without moving thepointer.
Double-click Press the primary mouse button twice continuously and quicklywithout moving the pointer.
Drag Press and hold the primary mouse button and move the pointerto a certain position.
Update HistoryUpdates on the document are described in the update history. Therefore, the latest documentcontains all updates made to previous versions.
Updates in Issue 02 (2010-01-28)Compared with Issue 01 (2009-03-28), this issue has the following new contents.
Modified:Altitude in 6.1.1 Running Environment
About This DocumentSmartAX MA5603T Optical Access Equipment
Product Description
vi Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Updates in Issue 01 (2009-03-28)This is the first release for the MA5603T V800R006C02.
SmartAX MA5603T Optical Access EquipmentProduct Description About This Document
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
vii
Contents
About This Document...................................................................................................................iii
1 Product orientation and Features............................................................................................1-11.1 Product Orientation.........................................................................................................................................1-21.2 Product Feature............................................................................................................................................... 1-3
1.2.1 Superior Manageability and Maintainability..........................................................................................1-41.2.2 Carrier-Class Reliability Design............................................................................................................ 1-61.2.3 Powerful GPON Access Capability....................................................................................................... 1-71.2.4 Abundant Ports.......................................................................................................................................1-91.2.5 Powerful QoS.......................................................................................................................................1-101.2.6 Strict Security.......................................................................................................................................1-111.2.7 Flexible Networking.............................................................................................................................1-121.2.8 Operable IPTV Services.......................................................................................................................1-12
2 Product Architecture..................................................................................................................2-12.1 Hardware Architecture....................................................................................................................................2-2
2.1.1 Appearance and Dimensions..................................................................................................................2-22.1.2 Configuration and Capacity................................................................................................................... 2-32.1.3 Boards.....................................................................................................................................................2-4
2.2 Functional Architecture...................................................................................................................................2-52.3 Software Architecture..................................................................................................................................... 2-7
3 Ports and Protocols.....................................................................................................................3-13.1 Physical Ports..................................................................................................................................................3-2
3.1.1 Port Types.............................................................................................................................................. 3-23.1.2 Port Specifications..................................................................................................................................3-4
3.2 Logical Ports................................................................................................................................................... 3-83.2.1 Port Types.............................................................................................................................................. 3-83.2.2 Interface Protocols..................................................................................................................................3-9
4 Network Applications...............................................................................................................4-14.1 Network Structure...........................................................................................................................................4-2
4.1.1 FTTx Network Applications.................................................................................................................. 4-24.1.2 Mobile Bearer Network Application......................................................................................................4-44.1.3 TDM Private Line Network Application............................................................................................... 4-6
4.2 Service Features.............................................................................................................................................. 4-6
SmartAX MA5603T Optical Access EquipmentProduct Description Contents
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
ix
4.2.1 MSTP Network Application...................................................................................................................4-74.2.2 QinQ Application...................................................................................................................................4-84.2.3 VLAN Stacking Application................................................................................................................4-104.2.4 Triple Play Application........................................................................................................................4-11
5 Device Management..................................................................................................................5-15.1 Overview.........................................................................................................................................................5-25.2 Management Through the CLI........................................................................................................................5-25.3 Management Through the N2000 BMS..........................................................................................................5-2
5.3.1 Overview of the N2000 BMS.................................................................................................................5-35.3.2 Running Environment............................................................................................................................5-35.3.3 Management Functions..........................................................................................................................5-35.3.4 Typical Networking Modes....................................................................................................................5-6
6 Technical Specifications and Standards Compliance.........................................................6-16.1 Device Parameters...........................................................................................................................................6-2
6.1.1 Running Environment............................................................................................................................6-26.1.2 Power Supply Parameters.......................................................................................................................6-26.1.3 Shelf Parameters.....................................................................................................................................6-36.1.4 Board Parameters...................................................................................................................................6-3
6.2 System Performance and Capacity..................................................................................................................6-46.3 Service and Maintenance Characteristics........................................................................................................6-66.4 Standards Compliance...................................................................................................................................6-10
A Acronyms and Abbreviations................................................................................................A-1
ContentsSmartAX MA5603T Optical Access Equipment
Product Description
x Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Figures
Figure 1-1 Sample network of the MA5603T......................................................................................................1-3Figure 2-1 Appearance of the MA5603T.............................................................................................................2-2Figure 2-2 Chassis layout of the MA5603T.........................................................................................................2-3Figure 2-3 Functional architecture of the MA5603T...........................................................................................2-6Figure 2-4 Software architecture of the MA5603T..............................................................................................2-7Figure 2-5 Host software architecture of the MA5603T......................................................................................2-8Figure 3-1 Physical ports of the MA5603T..........................................................................................................3-2Figure 3-2 Logic ports of the MA5603T..............................................................................................................3-9Figure 4-1 FTTH network application................................................................................................................. 4-3Figure 4-2 Mobile bearer network application.....................................................................................................4-5Figure 4-3 TDM private line network application............................................................................................... 4-6Figure 4-4 MSTP application...............................................................................................................................4-8Figure 4-5 QinQ application.................................................................................................................................4-9Figure 4-6 VLAN stacking application..............................................................................................................4-10Figure 4-7 Triple play application......................................................................................................................4-12Figure 5-1 Maintaining the MA5603T through the CLI......................................................................................5-2Figure 5-2 Inband EMS networking.....................................................................................................................5-6Figure 5-3 Outband EMS networking..................................................................................................................5-7
SmartAX MA5603T Optical Access EquipmentProduct Description Figures
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
xi
Tables
Table 1-1 Physical ports of the MA5603T...........................................................................................................1-9Table 2-1 Dimensions of the MA5603T...............................................................................................................2-3Table 2-2 Boards and ports of the MA5603T.......................................................................................................2-4Table 3-1 Physical ports of the MA5603T...........................................................................................................3-3Table 3-2 Specifications of the 100Base-Fx port.................................................................................................3-4Table 3-3 Specifications of the 1000Base-Sx port...............................................................................................3-4Table 3-4 Specifications of the 100Base-Lx port.................................................................................................3-5Table 3-5 Specifications of the ISDN port...........................................................................................................3-5Table 3-6 Specifications of the P2P FE optical port............................................................................................3-5Table 3-7 Specifications of the E1 Port................................................................................................................3-6Table 3-8 Specifications of the STM-1 optical port.............................................................................................3-6Table 3-9 Specifications of the GPON port (Class B+).......................................................................................3-7Table 3-10 Specifications of the GPON port (Class C+).....................................................................................3-8Table 3-11 Types and description of the logic ports of the MA5603T................................................................3-9Table 6-1 Environment parameters of the MA5603T..........................................................................................6-2Table 6-2 Power supply parameters of the MA5603T.........................................................................................6-2Table 6-3 Parameters of the MA5603T shelf.......................................................................................................6-3Table 6-4 Parameters of the MA5603T boards....................................................................................................6-3Table 6-5 System performance parameters..........................................................................................................6-4Table 6-6 Device configuration parameters.........................................................................................................6-4Table 6-7 MA5603T management ports..............................................................................................................6-5Table 6-8 MA5603T upstream ports....................................................................................................................6-5Table 6-9 MA5603T service ports........................................................................................................................6-6Table 6-10 Service characteristics of the MA5603T............................................................................................6-6Table 6-11 Maintenance characteristics of the MA5603T...................................................................................6-9
SmartAX MA5603T Optical Access EquipmentProduct Description Tables
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
xiii
1 Product orientation and Features
About This Chapter
This topic helps you to learn the network orientation and various functions of the MA5603T.
1.1 Product OrientationThe SmartAX MA5603T Multi-service Access Module is a GPONa medium-capacity accessproduct launched by Huawei Technologies Co., Ltd.
1.2 Product FeatureBased on well learning of the customer and market requirements, Huawei Technologies Co.,Ltd. launches the MA5603T with superior and rich functions through the perfect and maturesystem design.
SmartAX MA5603T Optical Access EquipmentProduct Description 1 Product orientation and Features
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
1-1
1.1 Product OrientationThe SmartAX MA5603T Multi-service Access Module is a GPONa medium-capacity accessproduct launched by Huawei Technologies Co., Ltd.
The MA5603T provides the data, voice, and video services that feature large capacity, high rate,and high bandwidth. To be specific,
l The MA5603T functions as an optical line terminal (OLT) in a GPON network to workwith the optical network unit (ONU) and optical network terminal (ONT).
l The MA5603T supports rich network applications, such as:– Fiber to the home (FTTH)
– Fiber to the building (FTTB)
– Base station transmission
– IP private line interconnection
– Multi-ISP wholesale
l The MA5603T supports broadband access services such as Point-to-point (P2P) opticalaccess.The MA5603T provides the P2P FTTH optical access by working with the ONU/ONT.
The MA5603T meets the following customer requirements:
l High-bandwidth and long-reach access to extend the coverage of large-scale access
l Integrated voice, data, and video services over a single fiber, meeting the customizedrequirements of telecom users.
Figure 1-1 shows the position of the MA5603T in a network.
1 Product orientation and FeaturesSmartAX MA5603T Optical Access Equipment
Product Description
1-2 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Figure 1-1 Sample network of the MA5603T
N2000 BMS
BRAS
TG
SoftswitchIPTV server
LAN switch
MA5603T
GE/E1/STM-1CATV server
ONT
STB
IPTVPCPhone
FTTHMDU
PC
FTTB
CATV
Combiner
Opticalsplitter
Opticalsplitter
Opticalsplitter
BRAS: broadband remote access server STB: set top box
CATV: cable TV MG: media gateway
1.2 Product FeatureBased on well learning of the customer and market requirements, Huawei Technologies Co.,Ltd. launches the MA5603T with superior and rich functions through the perfect and maturesystem design.
1.2.1 Superior Manageability and Maintainability
SmartAX MA5603T Optical Access EquipmentProduct Description 1 Product orientation and Features
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
1-3
The MA5603T provides excellent management, maintenance, and monitoring functions whichfacilitate routine management and fault detection.
1.2.2 Carrier-Class Reliability DesignThe system reliability is taken into consideration in the system, hardware, and software designsto ensure reliable running of the MA5603T.
1.2.3 Powerful GPON Access CapabilityThe MA5603T supports the GPON access, which effectively solves the bottleneck problem ofthe access through twisted pairs and meets the requirements of users for high-bandwidth services.
1.2.4 Abundant PortsThe MA5603T provides various upstream ports, service ports and maintenance ports to adaptto different network environments.
1.2.5 Powerful QoSThe MA5603T provides the following powerful quality of service (QoS) solutions to facilitatethe management of various services.
1.2.6 Strict SecurityTo meet the security requirements for carrier-class telecom services, the MA5603T provides thefollowing features to ensure the security of the system and the user.
1.2.7 Flexible NetworkingAs a multi-service access platform, the MA5603T supports multiple access modes to suit variousnetwork scenarios in different environments.
1.2.8 Operable IPTV ServicesThe MA5603T has a powerful service switching capacity, packet forwarding capability, andhigh integration of data switching and user management, which lays a foundation for operableand manageable multicast services.
1.2.1 Superior Manageability and MaintainabilityThe MA5603T provides excellent management, maintenance, and monitoring functions whichfacilitate routine management and fault detection.
Terminal Management
The MA5603T supports the management of VLAN configuration and port attributes of the ONTsbased on the ONT management and control interface (OMCI) protocol. The ONTs can beconfigured offline through the OLT, and the ONT configurations can be saved on the OLT. Inthis way, when an ONT registers with the OLT, the data of the ONT can be automaticallyrestored, thus easing the service provisioning.
Security Authentication Management
The iManager N2000 BMS Network Management System (hereafter referred to as the N2000BMS) provides sufficient user management and Radius authentication functions, meetingdifferent O&M requirements. When a user performs an operation, the N2000 BMS restricts theuser's operation according to the authorized devices, and then restricts the user's operationsaccording to the authorized operations. After a user passes the authentication and logs in, themenus for the unauthorized operations are unavailable for the user. In addition, the devices thatthe user are not authorized to operate are shielded from the management interface.
1 Product orientation and FeaturesSmartAX MA5603T Optical Access Equipment
Product Description
1-4 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Abundant Management Interfaces
The N2000 BMS supports NE management through various southbound interfaces, such as theTelnet and SNMP interfaces. In addition, the N2000 BMS provides standardized SNMP andTL1 northbound interfaces to support automated alarm, topology, service, inventory, and testfunctions to the OSS and the network management system. This helps the carriers to set up anoverall support platform for the network monitoring and automatic service provisioning.
Various Maintenance Meansl The MA5603T can be maintained locally through the command line interface (CLI).
l The MA5603T can be maintained remotely through the secure SSH command line or theSimple Network Management Protocol Version 3 (SNMPv3) network management system.For remote maintenance, the inband mode and the outband mode are supported.
l The MA5603T supports management based on SNMPv1, SNMPv2, and SNMPv3 throughthe N2000 BMS.
l MA5603T supports Ethernet operation, administration, and maintenance (OAM) based onIEEE P802.1ag. This enables end-to-end detection and diagnosis of faults in an Ethernetnetwork, thus reducing the cost of network maintenance.
l The MA5603T supports the following:
– In-service reporting of the hardware, and software versions.
– Real-time in-service upgrading and loading of the board software and host software.
– Real-time in-service loading and management of software patches.
– Built-in database upgrade tool.
l The MA5603T supports the loopback for the OLT and the ONT, and provides the faultdetection and diagnosis measures for the links, thus saving the network maintenance cost.
l The MA5603T supports loading, backing up, and querying electronic labels.
l The MA5603T supports detecting the malicious ONT through the GPON port andtroubleshooting the fault caused by the malicious ONT.
l No additional test meter is required. The MA5603T supports detecting the line from theOLT to the ONT and judging whether the line and configuration are proper.
l The MA5603T provides abundant measurement functions.
l The MA5603T supports detecting various alarms on the GPON line and reporting them tothe NMS. This helps the management user to know the line status and ONT status in realtime.
Environment Monitoring
The MA5603T provides an environment monitoring port. The port connects to the environmentmonitoring module through a special cable. In this way, the data related to the environment, suchas temperature, humidity, power supply voltage, and smoke can be collected. This helps to realizeremote and unattended maintenance.
The environment monitoring board supports plug-and-play, auto discovery and autoconfiguration.
SmartAX MA5603T Optical Access EquipmentProduct Description 1 Product orientation and Features
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
1-5
Software UpgradingThe control board and service board of the MA5603T support in-service upgrading in additionto the version rollback operation in case of an upgrading failure. You can upgrade the softwarethrough any of the following methods:
l A serial port based on Xmodem
l An Ethernet port based on the Trivial File Transfer Protocol (TFTP), Secure File TransferProtocol (SFTP), or File Transfer Protocol (FTP)
1.2.2 Carrier-Class Reliability DesignThe system reliability is taken into consideration in the system, hardware, and software designsto ensure reliable running of the MA5603T.
System Design
The following are the reliability features of system design of the MA5603T:
l The system complies with carrier-class reliability design.
l The system has comprehensive exception handling capability.
l The system is self-healing.
l The system has passed the electrostatic discharge (ESD) test.
l The system provides lightning protection and anti-interference functions.
l The system provides diverse alarm information for quick fault detection and rectification.
l The system supports remote maintenance.
l The system supports normalization selection and control of components.
l The electrical components adopt the derating design to improve the reliability.
l Fault pre-warning is supported on the exhaustive units and parts, such as the fan, powersupply, and battery.
l The system supports bidirectional forwarding detection (BFD). This implements the quickdetection of the communication faults between adjacent systems. In the case of a fault, areplacement channel can be quickly set up or the service can be quickly switched to otherlinks.
l The system supports optical line protection. The system supports the 1+1 (type B)protection for the PON port and the 50 ms level service protection switchover for thebackbone optical fiber.
l The system supports in-service upgrade.
l The system supports the functions of querying the board temperature, setting thetemperature threshold, and high temperature shutdown.
Hardware Design
The following are the reliability features of hardware design of the MA5603T:
l All important hardware components have backups.
l All service boards and the control board are hot swappable.
1 Product orientation and FeaturesSmartAX MA5603T Optical Access Equipment
Product Description
1-6 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Software Design
The following are the reliability features of software design of the MA5603T:
l Modularized and platform-based design, complying with the modularized and platform-based design and adopting the loosely coupled design for each software module.
l Advanced design methods such as object-orientation, fault tolerance, fault correction, andauto recovery
l Capability maturity model (CMM) management
l In-service software loading
Power Supply Design
The following are the reliability features of power supply design of the MA5603T:
l The power system provides dual -48/-60 VDC inputs to the power interface board(PAIA) to supply power to the chassis.
l The power interface board has the protective circuit to ensure the service consistency whenthe power supply of the board is faulty.
l The system supports input/output current-limiting protection.
l The system supports the reporting of the monitoring information, and remote control toimprove the system reliability.
Heat Dissipation Design
The following are the reliability features of heat dissipation design of the MA5603T:
l The heat dissipation system adopts a redundancy design, ensuring normal service operationwhen one fan is faulty.
l The fans adopt the air blowing mode and support hot swapping.
l The host software supports fan speed adjustment.
l The fan tray provides the fault alarm port of the optical coupling isolation parameter toreport the fault information.
Networking Redundancy Design
Multiple Spanning Tree Protocol (MSTP) protection and trunk function on FE/GE ports areprovided. When a link is faulty, the RSTP provides a loop free connected network.
1.2.3 Powerful GPON Access CapabilityThe MA5603T supports the GPON access, which effectively solves the bottleneck problem ofthe access through twisted pairs and meets the requirements of users for high-bandwidth services.
Compliance with ITU-T RecommendationsThe ITU-T G.984.x recommendations, including ITU-T G.984.1 to ITU-T G.984.4, define thefollowing aspects for the GPON system:l GPON network architecture
SmartAX MA5603T Optical Access EquipmentProduct Description 1 Product orientation and Features
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
1-7
l Specification of physical parts
l Protocol at the data link layer
l Management and control interfaces
The MA5603T is designed in strict compliance with the ITU-T G.984.x recommendations. It iscapable of working properly with GPON terminals of different vendors.
Bandwidth Allocation
The MA5603T supports both static bandwidth allocation (SBA) and dynamic bandwidthallocation (DBA).
l SBA guarantees that each ONT obtains a fixed bandwidth.
l DBA guarantees that the bandwidth is dynamically allocated to the ONTs according to thechange in user traffic.
l SBA and DBA support a bandwidth control granularity of 64 kbit/s.
The MA5603T provides hierarchical bandwidth control in both the upstream and downstreamdirections.
l In the upstream direction, bandwidth is allocated to the users or the user groups in the SBAand DBA modes based on the transmission container (T-CONT).
l In the upstream and downstream directions, accurate committed access rate (CAR) isperformed based on the traffic stream.
l The CAR based traffic stream supports a 64 kbit/s bandwidth control accuracy.
High Ratel The MA5603T adopts the passive optical transmission to resolve the bandwidth bottleneck
of the access over the twisted pair cables.
l The MA5603T supports the downstream rate of 2.488 Gbit/s and the upstream rate of 1.244Gbit/s.
l The MA5603T provides a sufficient bandwidth that meets the current service requirementsand guarantees provisioning of services with a higher bandwidth in the future.
Long Reachl The MA5603T adopts the passive optical transmission to support a long-reach service
coverage, which the access technology over the twisted pair cables does not support.
l The maximum physical transmission distance is 60 km.
l The MA5603T supports the downstream forward error correction (FEC) to extend thetransmission distance.
High Optical Split Ratio
The MA5603T supports a high optical split ratio of 1:128. This helps to expand the systemcapacity and save fiber resources, thus facilitating the expansion of the network.
1 Product orientation and FeaturesSmartAX MA5603T Optical Access Equipment
Product Description
1-8 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
High Efficiencyl All data is encapsulated as frames with a fixed length of 125 μs based on GPON
encapsulation mode (GEM). This helps to reduce the overhead bytes and improve thetransmission efficiency.
l When the upstream transmission bandwidth is 1.244 Gbit/s, the transmission efficiencyreaches up to 93%.
1.2.4 Abundant PortsThe MA5603T provides various upstream ports, service ports and maintenance ports to adaptto different network environments.
Table 1-1 shows the physical ports of the MA5603T.
Table 1-1 Physical ports of the MA5603T
Port Type Port Description
Upstream port GE optical/electricalport
l All GE optical ports use thesmall form-factor pluggable(SFP) optical transceivers.Through different SFPtransceivers, the optical portssupport different transmissiondistances. Single-mode SFPtransceivers and multi-modeSFP transceivers are available.
l The connector type of the GEelectrical port is RJ-45, whichcomplies with the IEEE802.3ab.
10 GE optical port It provides the 10GE upstream portthat supports Ethernet clocksynchronization.
E1 port It provides an E1 upstreamconnection. E1 signals aretransparently transmitted throughGPON.
STM-1 port It provides an STM-1 upstreamconnection. STM-1 signals aretransparently transmitted throughGPON.
Service port GPON optical port It provides GPON access. Itsupports a maximum upstream rateof 1.244 Gbit/s and a maximumdownstream rate of 2.488 Gbit/s
P2P FE optical port It provides the P2P Ethernet opticalaccess at a rate of 100 Mbit/s.
SmartAX MA5603T Optical Access EquipmentProduct Description 1 Product orientation and Features
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
1-9
Port Type Port Description
GE optical port The MA5603T provides GEoptical ports for subtendingconnections.
Maintenance port Maintenance serial port It is used for local maintenance.
Maintenance networkport
It is used for remote maintenance.
Environmentmonitoring serial port
Various environment parametersare collected by the monitoringdevice and then through this portreported to the MA5603T.
1.2.5 Powerful QoSThe MA5603T provides the following powerful quality of service (QoS) solutions to facilitatethe management of various services.
The MA5603T supports the following powerful QoS capabilities:l Transmits the data and network management streams upstream through different VLANs,
thus logically separating traffic of different typesl Tags the data and network management streams with different ToS/DSCP priorities, thus
providing a prioritized forwarding mechanism based on L3l Tags the data and network management streams with different 802.1p priorities, thus
providing a prioritized forwarding mechanism based on L2l Supports priority control based on the port, MAC address, IP address, TCP port number or
UDP port numberl Supports priority mapping and modification based on the ToS field and 802.1p
l Supports L2-L7 traffic classification based on the port, VLAN, MAC address, IP address,TCP port number or UDP port number
l Supports DSCP
l Supports bandwidth control based on the port, MAC address, IP address, TCP port numberor UDP port number, with a control granularity of 64 kbit/s
l Supports two queue scheduling modes: strict priority queue (SP) and weighted round robin(WRR)
l Supports the following QoS strategies based on the traffic rule:– Packet filtering
– Packet redirection
– Flow mirroring
– Traffic statistics
– Traffic shaping
– Bandwidth control
– Priority tagging
1 Product orientation and FeaturesSmartAX MA5603T Optical Access Equipment
Product Description
1-10 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
l Sets the 802.1p priority based on the VLAN for the protocol packets sent by the local CPU
1.2.6 Strict SecurityTo meet the security requirements for carrier-class telecom services, the MA5603T provides thefollowing features to ensure the security of the system and the user.
System Security
The MA5603T provides the following system security measures:
l Prevention of denial of service (DoS) attacks
l Access control list (ACL)-based access control
l Media access control (MAC) address filtering
l Prevention of ICMP/IP packet attacks
l Source address routing filtering
l Simple Network Management Protocol Version 3 (SNMP v3) for system managementA security mechanism based on the user-based security model (USM) is provided.
l Secure Shell Version 2 (SSHv2) for security authentication upon the login of maintenanceand management staff
l Secure data loading and backup through the Secure File Transfer Protocol (SFTP)
l Remote authentication dial in user service (RADIUS) authentication of maintenance andmanagement staff
l Hierarchical right control, that is, different rights for maintenance and management staffat different levels
l Firewall black list
l 802.3ah– The MA5603T supports transceiving and processing of Information OAMPDU packets
to carry out OAM Discovery and obtain the terminal vendor information.– The MA5603T supports resolution of the received Event Notification OAMPDU
packets.
User Security
The MA5603T provides the following user security measures:
l Layer 2 (L2) user isolation and controlled mutual access
l Dynamic Host Configuration Protocol (DHCP) Option82 to enhance the DHCP security
l Binding between MAC/IP addresses and traffic streams
l Policy Information Transfer Protocol (PITP) to identify users by the physical portinformation
l Prevention of MAC spoofing and IP spoofing
l 1:1 VMAC, thus solving the MAC spoofing caused by the unreliable MAC address of theterminal on the IP access network with the L2 Ethernet forwarding as the core
l Query of the IP address of a port by its MAC address
SmartAX MA5603T Optical Access EquipmentProduct Description 1 Product orientation and Features
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
1-11
l 802.1x-based user authentication, which prevents account forgery and enhances accuracyof the billing in a wireline network
l MAC/IP address binding based on the traffic streams
l Restriction on the number of MAC addresses based on the traffic streams
l Authentication based on the serial number (SN)/password (PW)/SN+PW of the ONU/ONT
l Only one ONT key in the downstream direction, controlled based on the GEM port
1.2.7 Flexible NetworkingAs a multi-service access platform, the MA5603T supports multiple access modes to suit variousnetwork scenarios in different environments.
The MA5603T provides the following network solutions:l FTTx network application
The MA5603T supports the FTTH and FTTB network applications. Through FTTH orFTTB, the MA5603T meets the network requirements of the scattered new high-endbuildings or villas, and the network requirements of populous apartments and smallenterprise and institution office buildings.
l Mobile bearer network applicationThe MA5603T supports the mobile bearer network application, which converges the fixednetwork and mobile network on the bearer plane, helps save the CAPEX and OPEX, andimplements the evolution of IP-based network.
l TDM private line network applicationThe MA5603T supports the TDM private line network application, meeting therequirements of enterprise users for the private line interconnection across the MAN.
l MSTP network applicationThe MA5603T supports the MSTP network application, providing redundant links with abetter load balancing function, which is applicable to all the networks with the serviceprotection requirement.
l QinQ network applicationThe MA5603T supports the QinQ network application. This application saves the publicVLANID resources and implements the transparent transmission of private VLANs to thepublic network.
l Vlan stacking network applicationThe MA5603T supports VLAN stacking network application to implement the VLANextended service and multi-ISP wholesale service.
l Triple play applicationThe powerful service processing capability of the MA5603T helps provide voice, data, andvideo services to users simultaneously with guaranteed QoS.
1.2.8 Operable IPTV ServicesThe MA5603T has a powerful service switching capacity, packet forwarding capability, andhigh integration of data switching and user management, which lays a foundation for operableand manageable multicast services.
The MA5603T supports the following carrier-class multicast capabilities:
1 Product orientation and FeaturesSmartAX MA5603T Optical Access Equipment
Product Description
1-12 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
l Large switching capacity
l High packet forwarding rate
l High integration of data switching, routing, and user management functions
The MA5603T provides flexible multicast solutions by supporting Internet Group ManagementProtocol (IGMP) v2/v3 on the user side interface, and IGMPv2/v3 on the network side interface.This lays the foundation for operability and manageability of broadband multicast services.
To be specific, the MA5603T supports powerful multicast functions in the following aspects.
Multicast Protocolsl IGMPv2/v3
l IGMP proxy and IGMP snooping
Multicast Service Functionsl Up to 4K multicast groups
l Easy channel management
l Configurable maximum number of preview times in a day
l IGMP pre-join, fast-leave, and high performance processing, which enable the broadbandTV (BTV) service
l Multicast VLAN-based program and user management
Multicast User Management Functionsl Multiple modes for authenticating multicast users to meet the requirements of different
multicast operatorsl Controllable multicast to control the users' access to multicast groups
l Connection admission control (CAC) for multicast users to ensure that authenticated usersenjoy a high quality of services
SmartAX MA5603T Optical Access EquipmentProduct Description 1 Product orientation and Features
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
1-13
2 Product Architecture
About This Chapter
This topic helps you to learn the hardware architecture, function architecture, and softwarearchitecture of the MA5603T.
2.1 Hardware ArchitectureHardware architecture includes the hardware such as appearance, dimensions, and configurationof the MA5603T.
2.2 Functional ArchitectureThe function modules of the MA5603T include service interface module, Ethernet switchingmodule, and service control module.
2.3 Software ArchitectureThe software of the MA5603T consists of board software and host software. The host softwareconsists of four planes: system support plane, system service plane, system management plane,and service control plane.
SmartAX MA5603T Optical Access EquipmentProduct Description 2 Product Architecture
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
2-1
2.1 Hardware ArchitectureHardware architecture includes the hardware such as appearance, dimensions, and configurationof the MA5603T.
2.1.1 Appearance and DimensionsThe MA5603T provides 13 slots, and the dimensions of the MA5603T are 442 mm x 232 mmx 219.5 mm (width x depth x height).
2.1.2 Configuration and CapacitySlots 0-5 of the MA5603T are for service boards, and slots 6-7 are for control boards. Twocontrol boards can be configured for the active/standby configuration.
2.1.3 BoardsThe MA5603T boards include control board, service board, and other boards.
2.1.1 Appearance and DimensionsThe MA5603T provides 13 slots, and the dimensions of the MA5603T are 442 mm x 232 mmx 219.5 mm (width x depth x height).
Appearance
Figure 2-1 shows the appearance of the MA5603T.
Figure 2-1 Appearance of the MA5603T
Dimensions
Table 2-1 provides the dimensions of the MA5603T.
2 Product ArchitectureSmartAX MA5603T Optical Access Equipment
Product Description
2-2 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Table 2-1 Dimensions of the MA5603T
Chassis Dimensions (W x D xH)
Description
MA5603T chassis(including the fan tray)
442 mm x 283.2 mm x263.9 mm
The chassis provides 13 slots,including the following:l Six slots for the service boards
l Two slots for the control boards
l Two GIU uplink slot
l Two slot for the power interfaceboard
l One slot for universal interfaceboard
2.1.2 Configuration and CapacitySlots 0-5 of the MA5603T are for service boards, and slots 6-7 are for control boards. Twocontrol boards can be configured for the active/standby configuration.
Figure 2-2 shows the chassis layout of the MA5603T.
Figure 2-2 Chassis layout of the MA5603T
F
A
N
0
1
2
3
4
5
6
7
10 PRTE PRTE11 12
GIU GIU8 9
GPIO
Service board
Service board
Service board
Service board
Service board
Service board
Control board
Control board
The fan tray is installed on the left side of the chassis for heat dissipation. The fans adopt the airblowing mode.
The MA5603T has 13 board slots numbered from 0 to 12. These slots are allocated as follows:
l Slots 0-5 hold the service boards.
SmartAX MA5603T Optical Access EquipmentProduct Description 2 Product Architecture
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
2-3
l Slots 6 and 7 hold the control boards. A chassis can hold up to two control boards to enableactive/standby switchover.
l Slot 8 and slot 9 are for the GIU board.
l Slot 10 and slot 11 are for the power interface board.
l Slot 12 is for the universal interface board.
2.1.3 BoardsThe MA5603T boards include control board, service board, and other boards.
Table 2-2 lists the boards and ports of the MA5603T
Table 2-2 Boards and ports of the MA5603T
Type Board Name Function External Port
Controlboard
SCUL Super controlunit
Serves as the controlboard for systemcontrol.
1 maintenancenetwork port1 serial port1 environmentmonitoring port
Serviceboard
GPBC GPON interfaceboard
Provides the GPONaccess.
4 GPON ports
GPBD GPON interfaceboard
Provides the GPONaccess.
8 GPON ports
OPFA FE opticalinterface board
Provides 16 FE opticalports.
16 FE opticalports
Uplinkinterfaceboard
GICF GE uplinkoptical interfaceboard
Provides GE upstreamports.
2 GE optical ports
GICG GE uplinkelectricalinterface board
Provides GE upstreamports.
2 GE electricalports
X1CA 10GE uplinkoptical interfaceboard
Provides 10GEupstream ports.
1 10GE opticalport
X2CA 10GE uplinkoptical interfaceboard
Provides 10GEupstream ports.
2 10GE opticalports
GSCA 4-port GE uplinkoptical interfaceboard
Provides GE upstreamports.
4 GE optical ports
TDMinterfaceboard
TOPA TDM interfaceboard
Provides the E1/STM-1 uplinkconnection.
16 E1 ports2 STM-1 ports
2 Product ArchitectureSmartAX MA5603T Optical Access Equipment
Product Description
2-4 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Type Board Name Function External Port
Subtendingboard
ETHAETHB
GE subtendinginterface board
Provides the GEsubtending function.
8 GE optical ports
Powerboard
PRTE Power interfaceboard
Provides power supplyfor the service shelf.
1 power connector
Monitoringboard
PMIA Powermonitoringinterface board
Provides the functionsof fan monitoring,environmentmonitoring, and 100Muplink network ports.
1 GE electricalport and 1debugging serialport
Fan board FMCA Fan monitoringboard
It supports adjustingthe fan rotating speedand monitoring the fanstatus.It supports reportingthe detected alarm tothe control boardthrough the serial port,or reporting the alarmstatus to the host in theform of dry contactpoint.It supports hotswapping.
-
2.2 Functional ArchitectureThe function modules of the MA5603T include service interface module, Ethernet switchingmodule, and service control module.
Overview
Figure 2-3 shows the following functional modules of the MA5603T:l Service interface module
l Ethernet switching module
l Service control module
l Upstream interface module
SmartAX MA5603T Optical Access EquipmentProduct Description 2 Product Architecture
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
2-5
Figure 2-3 Functional architecture of the MA5603T
10GEbus
GE/10GE
10GE bus
FE fiber
GPONE1/STM-1
Service interface module Upstream interface module
ServicecontrolmoduleEthernet
switchingmodule
GEbus
Service Interface Module
This module consists of the service boards and related software. It provides the followingfunctions:
l Implements GPON access and convergence, and works with the control board to manageONUs/ONTs.
l Implements P2P Ethernet optical access to provide high-bandwidth access services.
Ethernet Switching Module
This module is provided by the control board. It provides Ethernet aggregation and switchingbased on the 10GE bus architecture.
Service Control Module
This module is provided by the control board. It provides the following functions:
l Controls the system and manages the services.
l Provides a serial port and a network port for you to maintain the system easily through themaintenance terminal or the network management client.
l Supports active/standby switchover for control board.
Upstream Interface Module
This module provides the following network ports to connect to the upper layer device:
l GE optical/electrical ports
l 10GE optical ports
l E1 ports
l STM-1 ports
2 Product ArchitectureSmartAX MA5603T Optical Access Equipment
Product Description
2-6 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
2.3 Software ArchitectureThe software of the MA5603T consists of board software and host software. The host softwareconsists of four planes: system support plane, system service plane, system management plane,and service control plane.
Overview
The part within the dashed border indicates the software architecture of the MA5603T.
Figure 2-4 shows the software architecture of the MA5603T.
Figure 2-4 Software architecture of the MA5603T
Software system
LCT/CLI serialport terminal
CLI SSHTelnet
Host software
Board software 2 Board software N...
Inband/Outband
Serial portconnection
EMS
Communication control bus
Inband/Outband
Board software 1
Board Software
The board software runs on the service board, the interface board, and certain power interfaceboards to provide the following functions:l Board service management
l Data management
l Alarm management
SmartAX MA5603T Optical Access EquipmentProduct Description 2 Product Architecture
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
2-7
l Driving and diagnosis
Host Software
The host software consists of four planes running on the control board.
Figure 2-5 shows the host software architecture of the MA5603T.
Figure 2-5 Host software architecture of the MA5603T
System service plane
Service control plane
System
support plane
System
managem
ent plane
The functions of the four planes are as follows:
l System support plane: It drives the hardware system.
l System service plane: It provides the basic operating service for the software operation,and manages the system equipment. The basic functional module of the system serviceplane is the operating system.
l System management plane: It provides the functions of device and service management.
l Service control plane (IP service control sub-plane): It is the core module that provides thefollowing service functions:– Resolving and processing the service configuration commands
– Implementing protocol processing between the equipment
– Processing the service requests
– Providing the required services for the users
2 Product ArchitectureSmartAX MA5603T Optical Access Equipment
Product Description
2-8 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
3 Ports and Protocols
About This Chapter
This topic helps you to learn the physical ports, logical ports, and protocols supported by theMA5603T.
3.1 Physical PortsPhysical ports include the physical port types of the MA5603T and provides the standards thatthe MA5603T complies with.
3.2 Logical PortsLogical ports include the logic port types of the MA5603T and provides the standards that theMA5603T complies with.
SmartAX MA5603T Optical Access EquipmentProduct Description 3 Ports and Protocols
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
3-1
3.1 Physical PortsPhysical ports include the physical port types of the MA5603T and provides the standards thatthe MA5603T complies with.
3.1.1 Port TypesThe MA5603T provides multiple types of ports to suite different network environments.
3.1.2 Port SpecificationsPort specifications include the technical specifications of the physical ports of the MA5603T.
3.1.1 Port TypesThe MA5603T provides multiple types of ports to suite different network environments.
Figure 3-1 lists the physical ports of the MA5603T.
Figure 3-1 Physical ports of the MA5603T
MA5603TMaintenance
serial port
GE optical/electrical port
10GE opticalport E1/STM-1 port
P2P FE opticalport
GPON opticalport
Maintenancenetwork port
upstream
downstream
Environment monitoringserial port
Ethernetoptical port
3 Ports and ProtocolsSmartAX MA5603T Optical Access Equipment
Product Description
3-2 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Table 3-1 Physical ports of the MA5603T
Port Type Port Description
Upstream port GE optical/electricalport
l All GE optical ports use thesmall form-factor pluggable(SFP) optical transceivers.Through different SFPtransceivers, the optical portssupport different transmissiondistances. Single-mode SFPtransceivers and multi-modeSFP transceivers are available.
l The connector type of the GEelectrical port is RJ-45, whichcomplies with the IEEE802.3ab.
10 GE optical port It provides the 10GE upstream portthat supports Ethernet clocksynchronization.
E1 port It provides an E1 upstreamconnection. E1 signals aretransparently transmitted throughGPON.
STM-1 port It provides an STM-1 upstreamconnection. STM-1 signals aretransparently transmitted throughGPON.
Service port GPON optical port It provides GPON access. Itsupports a maximum upstream rateof 1.244 Gbit/s and a maximumdownstream rate of 2.488 Gbit/s
P2P FE optical port It provides the P2P Ethernet opticalaccess at a rate of 100 Mbit/s.
GE optical port The MA5603T provides GEoptical ports for subtendingconnections.
Maintenance port Maintenance serial port It is used for local maintenance.
Maintenance networkport
It is used for remote maintenance.
Environmentmonitoring serial port
Various environment parametersare collected by the monitoringdevice and then through this portreported to the MA5603T.
SmartAX MA5603T Optical Access EquipmentProduct Description 3 Ports and Protocols
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
3-3
3.1.2 Port SpecificationsPort specifications include the technical specifications of the physical ports of the MA5603T.
100Base-Fx Port
Table 3-2 Specifications of the 100Base-Fx port
Parameter Specification
Transmission rate Full duplex 100 Mbit/s
Port type LC
Cable type Fiber
Interface mode Multi-mode Single-mode
Maximum reach 2 km 15 km
Central wavelength 1310 nm 1310 nm
Transmit optical power -19 dBm to -14 dBm -15 dBm to -8 dBm
Extinction ratio 8 dB 8.2 dB
Maximum receive sensitivity -30 dBm -28 dBm
Standard compliance IEEE 802.3u
1000Base-Sx Port
Table 3-3 Specifications of the 1000Base-Sx port
Parameter Specification
Transmission rate 1.25 Gbit/s
Port type LC
Cable type Fiber
Fiber used and maximum transmissiondistance
500 m over a 50 µm/125 µm multi-modefiber
Standard compliance IEEE 802.3z
Central wavelength 850 nm
Transmit optical power -9.5 dBm to 0 dBm
Extinction ratio 9 dB
Maximum receive sensitivity -17 dBm
3 Ports and ProtocolsSmartAX MA5603T Optical Access Equipment
Product Description
3-4 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
1000Base-Lx Port
Table 3-4 Specifications of the 100Base-Lx port
Parameter Specification
Transmission rate 1.25 Gbit/s
Port type LC
Fiber used and maximum transmissiondistance
10 km over a 9 µm/125 µm single-mode fibe
Standard compliance IEEE 802.3z
Central wavelength 1310 nm
Transmit optical power -9.0 dBm to -3.0 dBm
Extinction ratio 9.0 dB
Maximum receive sensitivity -20 dBm
ISDN Port
Table 3-5 Specifications of the ISDN port
Parameter Specification
Connector type Telco64
Maximum transmission distance 4200 m
Cable type Twisted pair
Line coding 4B3T, 2B1Q
Supported frame protocol G.711 a-law/μ-law
Standard compliance ETSI TS 102 080, Annex BITU-T G.961, Annex 1
P2P FE Port
Table 3-6 Specifications of the P2P FE optical port
Parameter Specification
Transmission rate 100 Mbit/s
Port type LC/PC
SmartAX MA5603T Optical Access EquipmentProduct Description 3 Ports and Protocols
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
3-5
Parameter Specification
Maximum reach 15 km
Central wavelength Transmit (Tx): 1550 nmReceive (Rx): 1310 nm
Transmit optical power -15 dBm to -8 dBm
Extinction ratio 8.5 dB (MIN)
Maximum receive sensitivity -32 dBm
Standard compliance ITU-T G0.957
E1 Port
Table 3-7 Specifications of the E1 Port
Parameter Specification
Transmission rate 2048 kbit/s
Cable type Coaxial cable/Twisted p
STM-1 Optical Port
Table 3-8 Specifications of the STM-1 optical port
Parameter Specification
Transmission rate 155 Mbit/s
Type of connector SC/PC (square connector)
Fiber type G0.652
Central wavelength(nm)
1310 1310 1310
Working wavelengthrange (nm)
1260-1360 1261-1360 1263-1360
Interface mode Multi-mode Single-mode Single-mode
Maximum distance oftransmission (km)
2 15 40
Light source type MLM MLM MLM
3 Ports and ProtocolsSmartAX MA5603T Optical Access Equipment
Product Description
3-6 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Parameter Specification
Maximum averagetransmit optical power(dBm)
-8 -8 0
Minimum averagetransmit optical power(dBm)
-15 -15 -5
Minimum extinctionratio (dB)
8.2 8.2 10
Minimum receivesensitivity (dBm)
-23 -28 -34
Minimum receiveoverload power(dBm)
-8 -8 -10
Specifications of the GPON Port
Table 3-9 Specifications of the GPON port (Class B+)
Parameter Specification
Transmission rate Transmit (Tx): 2.488 Gbit/sReceive (Rx): 1.244 Gbit/s
Port type SC/PC
Maximum transmission distance 20 km
Cable type Single-mode optical fiber
Standard compliance ITU-T G.984.2 CLASS B+
Central wavelength Transmit (Tx): 1490 nmReceive (Rx): 1310 nm
Transmit optical power 1.5 dBm to 5.0 dBm
Extinction ratio 10 dB
Maximum receive sensitivity -28 dBm
Overload optical power -8 dBm
SmartAX MA5603T Optical Access EquipmentProduct Description 3 Ports and Protocols
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
3-7
Table 3-10 Specifications of the GPON port (Class C+)
Parameter Specification
Transmission rate Transmit (Tx): 2.488 Gbit/sReceive (Rx): 1.244 Gbit/s
Port type SC/PC
Maximum transmission distance 20 km
Cable type Single-mode optical fiber
Standard compliance ITU-T G.984.2 CLASS C+
Central wavelength Transmit (Tx): 1490 nmReceive (Rx): 1310 nm
Transmit optical power 3.0 dBm to 7.0 dBm
Extinction ratio 10 dB
Maximum receive sensitivity -30 dBm
Overload optical power -8 dBm
NOTEThe GPBD board supports small form-factor pluggable (SFP) optical transceiver of Class B+ or Class C+. The GPBC board supports the optical transceiver of only Class B+.
3.2 Logical PortsLogical ports include the logic port types of the MA5603T and provides the standards that theMA5603T complies with.
3.2.1 Port TypesThe MA5603T supports the SNMP port, TFTP/FTP/SFTP port, and Telnet port.
3.2.2 Interface ProtocolsInterface protocols include the standards and protocols that the logic port of the MA5603Tcomplies with.
3.2.1 Port TypesThe MA5603T supports the SNMP port, TFTP/FTP/SFTP port, and Telnet port.
The MA5603T supports SNMP, TFTP/FTP/SFTP, and Telnet. You can configure and managethe MA5603T from the upper-layer NMS through the SNMP port, or from the maintenanceterminal through the TFTP/FTP/SFTP ports.
Through the data transmission between the logic ports, the operator can conveniently performdata query, real-time monitoring, service configuration and fault management on theMA5603T from an external management device. Figure 3-2 lists the logic ports of theMA5603T.
3 Ports and ProtocolsSmartAX MA5603T Optical Access Equipment
Product Description
3-8 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Figure 3-2 Logic ports of the MA5603T
MA5603T
SNMPinterface
SFTP/TFTP/FTP interface Telnet interface
Table 3-11 Types and description of the logic ports of the MA5603T
Port Type Description
SNMP port The operator can log in to MA5603T from the NMS through theSNMP port and to configure, manage and maintain theMA5603T.
TFTP/FTP/SFTP port The operator can back up the configuration data, upgrade thesoftware version, and load software patches for the MA5603Tfrom the maintenance terminal through the TFTP/FTP/SFTP port.
Telnet port The operator can log in to the MA5603T from the maintenanceterminal through the Telnet port to configure, manage and maintainthe MA5603T.
3.2.2 Interface ProtocolsInterface protocols include the standards and protocols that the logic port of the MA5603Tcomplies with.
Ethernet Protocols
Standard ID Description
IEEE 802.1q IEEE standard for local and metropolitan area networks VirtualBridged Local Area Networks
SmartAX MA5603T Optical Access EquipmentProduct Description 3 Ports and Protocols
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
3-9
Standard ID Description
IEEE 802.1d STP
IEEE 802.1w RSTP
IEEE 802.3x Full Duplex operation in a switched LAN
IEEE 802.3ad Link Aggregation (Trunking)
IEEE 802.3u Ethernet MIB
IEEE 802.3u 100BASE-FX
IEEE 802.3z 1000BASE-X
IEEE 802.3ab 1000BASE-T
Encapsulation Protocols
Standard ID Description
RFC1483 Multiprotocol Encapsulation over ATM Adaptation Layer 5
RFC2684 Multiprotocol Encapsulation over ATM Adaptation Layer 5
RFC1626 Default IP MTU for use over AAL5
RFC1661 Point to Point Protocol (PPP)
RFC2516 PPPoE
RFC2364 PPPoA
RFC1577 Classical IP and ARP over ATM
RFC2225 Classical IP and ARP over ATM
RFC3046 DHCP Relay
RFC2236 IGMP V2
RFC3376 IGMP V3
TR101 PPPOE+, DHCP Option82
RFC2132 DHCP option60
IP Protocols
Standard ID Description
RFC768 UDP protocol
RFC783 The TFTP Protocol (Revision 2)
3 Ports and ProtocolsSmartAX MA5603T Optical Access Equipment
Product Description
3-10 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Standard ID Description
RFC791 IP protocol
RFC792 ICMP protocol
RFC793 TCP protocol
RFC826 ARP
RFC854 Telnet protocol
RFC894 Standard for transmitting IP packet on Ethernet
RFC2131 DHCP
RFC1119 NTP
RFC1858 Security Considerations for IP Fragment Filtering
RFC2453 RIP
RFC2362 PIM-SM
RFC2328 OSPF
RFC2474 Definition of the Differentiated Services Field (DS Field) in theIPv4 and IPv6 Headers
RFC2475 An Architecture for Differentiated Services, including edge-conditioning functions such as Packet Classification, Policing,Shaping, Marking & Metering
OAM ProtocolsStandard ID Description
RFC1155 Structure and identifier of the Internet management informationbased on TCP/IP
RFC1157 Simple Network Management Protocol (SNMP)
RFC1213 Internet Network Management Information Base based on TCP/IPMIB-II
RFC1212 Concise MIB Definitions
RFC1757 Remote Network Monitoring Management Information Base
RFC1906 Transport Mappings for Version 2 of the Simple NetworkManagement Protocol (SNMPv2)
RFC1907 Management Information Base for Version 2 of the SimpleNetwork Management Protocol (SNMPv2)
RFC2571 An Architecture for Describing SNMP Management Frameworks
SmartAX MA5603T Optical Access EquipmentProduct Description 3 Ports and Protocols
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
3-11
Standard ID Description
RFC2572 Message Processing and Dispatching for the Simple NetworkManagement Protocol (SNMP)
RFC2573 SNMP Applications
RFC1643 Definitions of Managed Objects for the Ethernet-like InterfaceTypes
GR-474-CORE Network Maintenance, Alarm and Control
RFC2578 Structure of Management Information Version 2 (SMIv2)
RFC2819 Remote Network Monitoring
IEEE 802.1ag Connectivity Fault Management
IEEE 802.3ah Media Access Control Parameters, Physical Layers, andManagement Parameters for Subscriber Access Networks
GPON ProtocolsStandard ID Description
ITU-T G.984.1 Gigabit-capable Passive Optical Networks (GPON) GeneralCharacteristics
ITU-T G.984.2 Gigabit-capable Passive Optical Networks (GPON) PhysicalMedia Dependent (PMD) Layer Specification
ITU-T G.984.3 Gigabit-capable Passive Optical Networks (GPON)Transmission Convergence Layer Specification
ITU-T G.984.4 Gigabit-capable Passive Optical Networks(GPON) ONUManagement and Control Interface Specification
3 Ports and ProtocolsSmartAX MA5603T Optical Access Equipment
Product Description
3-12 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
4 Network Applications
About This Chapter
This topic helps you to learn the position of the MA5603T in the network and the networkfeatures supported by the MA5603T.
4.1 Network StructureThe MA5603T supports the FTTx network and broadband and narrowband combo network.
4.2 Service FeaturesThe MA5603T supports network applications such as MSTP network application, QinQ networkapplication, VLAN stacking and Triple play network application.
SmartAX MA5603T Optical Access EquipmentProduct Description 4 Network Applications
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
4-1
4.1 Network StructureThe MA5603T supports the FTTx network and broadband and narrowband combo network.
4.1.1 FTTx Network ApplicationsThe MA5603T supports the FTTH and FTTB network applications. Through FTTH, theMA5603T meets the network requirements of the scattered new high-end buildings or villas;through FTTB, the MA5603T meets the network requirements of populous apartments and smallenterprise and institution office buildings.
4.1.2 Mobile Bearer Network ApplicationThe MA5603T supports the mobile bearer network application, which converges the fixednetwork and mobile network on the bearer plane, helps save the CAPEX and OPEX, andimplements the evolution of IP-based network.
4.1.3 TDM Private Line Network ApplicationThe MA5603T supports the TDM private line network application, meeting the requirementsof enterprise users for the private line interconnection across the MAN.
4.1.1 FTTx Network ApplicationsThe MA5603T supports the FTTH and FTTB network applications. Through FTTH, theMA5603T meets the network requirements of the scattered new high-end buildings or villas;through FTTB, the MA5603T meets the network requirements of populous apartments and smallenterprise and institution office buildings.
Service DescriptionThe MA5603T supports the FTTH network application. Through FTTH, the MA5603T uses asingle optical fiber to provide the data and video services for the scattered new high-end buildingsor villas.
The MA5603T supports the FTTB network application. Intended for the building where twistedpairs are routed, the MA5603T provides the data and video services for the community usersthrough FTTB by connecting to an ONT in the downstream direction.
An FTTB network is suitable for high-density apartments and small enterprise office buildings.
In an FTTB network, the ONT is installed inside the building and the services are transmittedto each subscriber through twisted pairs.
Network TopologyFigure 4-1 shows the FTTH network application.
4 Network ApplicationsSmartAX MA5603T Optical Access Equipment
Product Description
4-2 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Figure 4-1 FTTH network application
N2000 BMS
BRASCATV server
IPTV server
LAN switch
OLT
MG
ONUSTB
CATVPCPhone IPTV
Combiner
Opticalsplitter
OLT: Optical Line Terminal ONU: optical network unit
STB: set top box BRAS: broadband remote access server
MG: media gateway
Network Descriptionl Voice service
After passing the ONT, the VoIP packets reach the MA5603T. The MA5603T thentransmits the packets to the IMS network, or to the PSTN network through an MG.
l Data serviceThe PCs are connected to the MA5603T through the ONTs. The PCs are then connectedto the IP network through the BRAS.
SmartAX MA5603T Optical Access EquipmentProduct Description 4 Network Applications
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
4-3
l Video service
The video traffic is sent to the ONTs in the IPTV or cable television (CATV) mode.
– IPTV
In the IPTV mode, the video service is delivered over IP multicast traffic, supplyingusers with various programs.
The MA5603T manages the multicast user rights and programs based on IGMP proxyand controllable multicast. After the users have passed the authentication, theMA5603T transmits the IGMP protocol packets to the device at the aggregation layer.
The multicast server transmits the video traffic to the MA5603T through the backbonenetwork and the convergence network. The MA5603T forwards the traffic to the userterminals based on the authentication results.
At the user end, the STB terminates video signals, performs media conversion, andcontrols program switching.
– CATV
In the CATV mode, traditional analogue signals of TV programs are transmitted overthe twisted pairs.
Through the electrical-to-optical conversion, video streams are converted intodownstream optical waves, and then superposed with downstream optical waves of theGPON in the wavelength division multiplexing (WDM) mode. The superposed wavesare transmitted to the ONT in the downstream direction through an optical fiber. Thenthe ONT separates the video signals from the waves, and sends the signals to the TV.In this way, the video service is realized.
4.1.2 Mobile Bearer Network ApplicationThe MA5603T supports the mobile bearer network application, which converges the fixednetwork and mobile network on the bearer plane, helps save the CAPEX and OPEX, andimplements the evolution of IP-based network.
Service Description
To address the growing number of mobile users and increasing demand for the mobile data andvideo services, 3G mobile stations need to be increased to provide high bandwidth.
Compared with the SDH/ATM private line technologies, the IP return transmission technologynot only offers an easy return transmission solution for base stations, but also helps to greatlysave the cost for base station return transmission.
In the mobile bearer network application, the IP-based return transmission technology is adoptedas a replacement of the TDM-based or ATM-based return transmission technology to realizeintegration of fixed and mobile networks at the bearer layer. In this way, the need to maintainonly one network helps to reduce the CapEx and OpEx, thus facilitating evolution to an all-IPnetwork.
Network Topology
Figure 4-2 shows the sample network of the mobile bearer network application.
4 Network ApplicationsSmartAX MA5603T Optical Access Equipment
Product Description
4-4 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Figure 4-2 Mobile bearer network application
E1 (TDM)
OLT
Gateway
BSC RNC
STM-1N*E1
3GCore network
BITS IP/MPLS/PWE3/OAM/TE
PON
Base station (2G)Clock signal
ONU
FE (IP)
Base station (3G)
Network DescriptionThe mobile bearer network application features the following:l The base station adopts distributed mode, and provides IP ports and E1 ports.
– The base station adopts distributed mode. The data service is sent upstream through theIP ports.
– The data service requires high bandwidth. Hence, the base station adopts IP ports fordata service transmission, thus improving the bandwidth utilization for the upstreamdata service.
– The IP ports support data access.
l The E1 ports provided by the base station support return transmission through PWE3.– For the large number of legacy base stations and the base stations that are presently
under construction, IP uplink connection is not adopted, and only E1 ports are used.– The E1 ports must support PWE3 to facilitate service bearing over an IP network.
The MA5603T obtains the clock information from the BITS, and sends the clock informationto the downstream mobile base stations through the ONT. In this way, clock synchronization is
SmartAX MA5603T Optical Access EquipmentProduct Description 4 Network Applications
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
4-5
maintained between the base station, the BSC and the RNC, thus ensuring that the end users arenot affected during a service switchover between the base stations.
4.1.3 TDM Private Line Network ApplicationThe MA5603T supports the TDM private line network application, meeting the requirementsof enterprise users for the private line interconnection across the MAN.
Service DescriptionThe MA5603T supports the TDM private line network application. In the TDMoGEM mode,the TDM frame is directly encapsulated to the GPON GEM frame so that the TDM service canbe transmitted in a GPON network.
Network TopologyFigure 4-3 shows the TDM private line network application.
Figure 4-3 TDM private line network application
E1/STM-1
GPON
Ethernet
Ethernet
E1
Ethernet
E1
EthernetE1
TDMoGEM
ONT
ONT
ONT
GPON
SDH
Base station
Business center
Business center
OLT
Network DescriptionThe E1/STM-1 ports of the ONT access the TDM traffic from the base stations and enterprises.The ONT sends both the Ethernet traffic and the TDM traffic to the OLT. The OLT differentiatesthe Ethernet traffic and the TDM traffic, and sends the traffic to the IP network and the SDHnetwork, respectively.
4.2 Service FeaturesThe MA5603T supports network applications such as MSTP network application, QinQ networkapplication, VLAN stacking and Triple play network application.
4 Network ApplicationsSmartAX MA5603T Optical Access Equipment
Product Description
4-6 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
4.2.1 MSTP Network ApplicationThe MA5603T supports the MSTP network application, providing redundant links with a betterload balancing function, which is applicable to all the networks with the service protectionrequirement.
4.2.2 QinQ ApplicationThe MA5603T supports the QinQ network application. This application saves the public VLANID resources and implements the transparent transmission of private VLANs to the publicnetwork.
4.2.3 VLAN Stacking ApplicationThe MA5603T supports VLAN stacking network application to implement the VLAN extendedservice and multi-ISP wholesale service.
4.2.4 Triple Play ApplicationThe powerful service processing capability of the MA5603T helps provide voice, data, and videoservices to users simultaneously with guaranteed QoS.
4.2.1 MSTP Network ApplicationThe MA5603T supports the MSTP network application, providing redundant links with a betterload balancing function, which is applicable to all the networks with the service protectionrequirement.
Service DescriptionThe Multiple Spanning Tree Protocol (MSTP) is compatible with the Spanning Tree Protocol(STP) and Rapid Spanning Tree Protocol (RSTP). In addition, MSTP can remedy the drawbackof STP and RSTP. MSTP supports quick booting, and can also provide enhanced load balancingfunction for redundant links.
MSTP is applicable to a network with the service-protection requirement.
Network TopologyFigure 4-4 shows the MSTP application.
SmartAX MA5603T Optical Access EquipmentProduct Description 4 Network Applications
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
4-7
Figure 4-4 MSTP application
P2P ONT
MA5603T
MA5603TMA5603T
MA5603T
FE/GE
Access layer
Aggregation layer
NOTEThe wine loop in the figure indicates the MSTP loop structure.
Network DescriptionThe MA5603Ts form an MSTP network, which meets the service-protection requirement, savesthe optical fiber resources, and configures the spanning tree instance based on the VLAN toimplement load balancing for upstream ports.
Because an MSTP network requires switchover time and has limitations on the number of MACaddresses, it is not recommended to build an MSTP network at major nodes where there are alarge number of users.
4.2.2 QinQ ApplicationThe MA5603T supports the QinQ network application. This application saves the public VLANID resources and implements the transparent transmission of private VLANs to the publicnetwork.
Service DescriptionThe 802.1q in 802.1q (QinQ) application supports allocation of public VLAN IDs to user packetsthat have VLAN tags so that the packets can be transmitted in the backbone network using the
4 Network ApplicationsSmartAX MA5603T Optical Access Equipment
Product Description
4-8 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
public VLAN IDs. In this way, public VLAN ID resources are greatly saved, and the P2Pinterconnection between private line users across the MAN is facilitated.
Network TopologyFigure 4-5 shows the QinQ application.
Figure 4-5 QinQ application
Router
MA5603T
ONT
L2
VLAN 3VLAN 3 MA5603T
VLAN1 userVLAN2 user
L2
VLAN1 userVLAN2 user
ONT
QinQprivate line
Network DescriptionIn the QinQ application, the user packets transmitted in the backbone network have two layersof VLAN tags: a public VLAN tag and a private VLAN tag.
l On the user sideThe enterprise users are connected to the MA5603T through the ONT and the traffic isdelivered in the VLAN mode. The users of VLAN 1 and VLAN 2 are connected to theMA5603T. The MA5603T allocates a public VLAN ID (VLAN 3 with the QinQ attribute)to the packets, and forwards the packets to the upper layer network.
l On the network sideIn the backbone network, the packets are transmitted based on the public VLAN ID. Afterthe packets reach the MA5603T on the other side of the backbone network, theMA5603T removes the public VLAN tag from the packets, and passes the packets to theuser side device.
In the QinQ application, the transparent transmission of the private VLAN in the public networkis supported and public VLAN ID resources are saved. A simple two-layer virtual privatenetwork (VPN) channel is provided to realize the function of transparent transmission of privateVLANs and services to the peer end and to expand the private network.
SmartAX MA5603T Optical Access EquipmentProduct Description 4 Network Applications
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
4-9
4.2.3 VLAN Stacking ApplicationThe MA5603T supports VLAN stacking network application to implement the VLAN extendedservice and multi-ISP wholesale service.
Service Descriptionl VLAN extension: This is used to increase the number of VLANs and identify users.l Multi-ISP wholesale service: The upper layer network works in L2 working mode and the
packets are directly transmitted based on the VLAN and the MAC address.
VLAN stacking is similar to QinQ in implementation, but the user packet of VLAN stacking isencapsulated with two VLAN tags and the user packet of QinQ is encapsulated with one VLANtag.
Network TopologyFigure 4-6 shows the VLAN stacking application.
Figure 4-6 VLAN stacking application
GE
L2/L3
BRAS
L2/L3
GE
GE
ONU
PC PC PCPC
ONT ONT ONT ONU ONT
ISP2ISP1
MA5603T MA5603T MA5603T
Company A Company B
GEGE
Common Internet usersare identified by two
VLAN tags with help fromthe upper layer BRAS
Enterprise wholesaleusers of ISP2 directly
connect to ISP2 throughL2 forwarding
Enterprise wholesaleusers of ISP1 directly
connect to ISP1 throughL2 forwarding
BRAS: Broadband Remote Access Server ISP: Internet Service Provider
Network DescriptionIn the VLAN stacking application, the BRAS must authenticate both layers of VLAN tags. Whena packet reaches the MA5603T, it is tagged with two VLAN tags (outer VLAN and inner VLAN),
4 Network ApplicationsSmartAX MA5603T Optical Access Equipment
Product Description
4-10 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
and then transmitted to the associated ISP based on the outer VLAN tag. The user is identifiedby the inner VLAN tag.
The VLAN stacking application ensures that the VLANs can be reused, and realizes the multi-IPS wholesale service.
4.2.4 Triple Play ApplicationThe powerful service processing capability of the MA5603T helps provide voice, data, and videoservices to users simultaneously with guaranteed QoS.
Service DescriptionThe MA5600T supports the following triple play solutions:l Triple play solution through multiple GEM ports
Different GEM ports are used to differentiate different traffic streams.Different traffic streams are mapped to different GEM ports according to the VLAN ID,802.1p, or physical port, and then sent to the MA5600T for processing.
l Triple play solution through a single GEM portsThe MA5600T differentiates the service streams according to the Ethernet type of the user-side packet, VLAN ID at the user side, and 802.1p domain at the user side, and then controlthe traffic streams.The current ONT need not be re-configured, which saves the GEM port resource.
Network TopologyFigure 4-7 shows the triple play application.
SmartAX MA5603T Optical Access EquipmentProduct Description 4 Network Applications
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
4-11
Figure 4-7 Triple play application
BRAS
MG
IPTV server
ONT
STB
TVPCPhone
MA5603T
L2/L3 LAN switch
Triple play
Softswitch
Network Description
In this scenario, triple play users are connected to the MA5603T through the ONT. TheMA5603T provides voice service, data (Internet access) service,and video service to the users.
l Voice service
After passing the ONT, the VoIP packets reach the MA5603T. The MA5603T thentransmits the packets to the IMS network, or to the PSTN network through an MG.
l Data service
The data packets from PCs are transmitted to the MA5603T through the ONT, and then tothe IP network in the upstream direction after they are processed by the BRAS.
l Video service
– The video service is delivered over IP multicast traffic, providing users with variousprograms.
– The MA5603T manages the multicast user rights and programs based on IGMP proxyand controllable multicast. After the users have passed the authentication, theMA5603T transmits the IGMP proxy control packets upstream to the multicast serverto manage the multicast users and the programs.
4 Network ApplicationsSmartAX MA5603T Optical Access Equipment
Product Description
4-12 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
– The multicast server transmits the video service traffic to the MA5603T through thebackbone network and the convergence network. The MA5603T forwards the traffic tothe user terminals based on the authentication results.
– At the user end, the set top box (STB) is used to terminate video signals, performs mediaconversion, and control program switching.
The triple play solution enables simultaneous multi-service access on the same user terminal.
SmartAX MA5603T Optical Access EquipmentProduct Description 4 Network Applications
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
4-13
5 Device Management
About This Chapter
This topic helps you to learn the method for managing the MA5603T, and the function andnetwork of the N2000 BMS.
5.1 OverviewYou can manage, maintain, and monitor the MA5603T through the command line interface(CLI) or the NMS.
5.2 Management Through the CLIIn the CLI mode, you can manage and maintain the MA5603T after logging in to it through theserial port or Ethernet port.
5.3 Management Through the N2000 BMSThe operator can manage and maintain the MA5603T through the N2000 BMS.
SmartAX MA5603T Optical Access EquipmentProduct Description 5 Device Management
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
5-1
5.1 OverviewYou can manage, maintain, and monitor the MA5603T through the command line interface(CLI) or the NMS.
l Management through the command line interface (CLI), where the following two modesare available:– Local or remote maintenance through a serial port connection
– Remote maintenance over a Telnet session
l Management through the EMS based on SNMP, where the following two modes areavailable:– Inband mode
– Outband mode
5.2 Management Through the CLIIn the CLI mode, you can manage and maintain the MA5603T after logging in to it through theserial port or Ethernet port.
Figure 5-1 shows the networking for maintenance through the CLI.
Figure 5-1 Maintaining the MA5603T through the CLI
MA5603T
ModemModem
Telnet terminal
Serial port/network port
Serial port/network port
Local maintenance terminal
Remotemaintenance terminal
Serialport
5.3 Management Through the N2000 BMSThe operator can manage and maintain the MA5603T through the N2000 BMS.
5.3.1 Overview of the N2000 BMSThe N2000 BMS Fixed Network Integrated Management System (hereinafter called N2000BMS) is the network management system developed by Huawei, managing the fixed networkdevices of Huawei, including broadband access devices and integrated access devices.
5.3.2 Running Environment
5 Device ManagementSmartAX MA5603T Optical Access Equipment
Product Description
5-2 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
The running environment of the N2000 BMS should meet the requirements of hardwareconfiguration and software configuration.
5.3.3 Management FunctionsThe N2000 BMS provides superior management functions such as topology management,performance management, fault management, and security management.
5.3.4 Typical Networking ModesThe N2000 BMS can be networked with the MA5603T in the inband mode and outband mode.
5.3.1 Overview of the N2000 BMSThe N2000 BMS Fixed Network Integrated Management System (hereinafter called N2000BMS) is the network management system developed by Huawei, managing the fixed networkdevices of Huawei, including broadband access devices and integrated access devices.
The N2000 BMS is an EMS of Huawei that manages the broadband and narrowband accessdevices of Huawei. The N2000 BMS communicates with the MA5603T through SNMP tomanage the MA5603T.
5.3.2 Running EnvironmentThe running environment of the N2000 BMS should meet the requirements of hardwareconfiguration and software configuration.
Server Hardware ConfigurationA PC server or a UNIX workstation is required for the server hardware configuration.
The EMS server to be used depends on the actual management requirement. For a medium or alarge EMS, a UNIX workstation is recommended.
Server Software ConfigurationWindows platform: Windows 2003 Server + SQL Server 2000
UNIX platform: Solaris 10 + Sybase 12.5
N2000 BMS software: N2000 BMS server application software
Client Hardware ConfigurationA PC or a UNIX workstation is required for the client hardware configuration.
A UNIX workstation is expensive. Hence, it is not recommended.
Client Software ConfigurationOperating system: Windows XP Professional
Application software: N2000 BMS client application software
5.3.3 Management FunctionsThe N2000 BMS provides superior management functions such as topology management,performance management, fault management, and security management.
SmartAX MA5603T Optical Access EquipmentProduct Description 5 Device Management
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
5-3
OverviewThe management functions of the N2000 BMS include the following:
l Topology management
l Performance management
l Fault management
l Security management
l Batch service provisioning
l Backup and uploading of NE data
l Database management
l Abundant management interfaces
l Environment and power supply monitoring
l Graphic user interface
l Configuration management
Topology Management
The N2000 BMS can display the NEs in the entire network in one topology view. Through aunified management platform, it can monitor and manage all NEs in the network. This facilitatesnetwork maintenance tasks.
Performance Monitoring and Traffic Measurement
The N2000 BMS helps you to monitor system performance and collect traffic statistics of allNEs or a specified NE in the network so that the network resources can be utilized optimally.
Fault Management
The N2000 BMS provides an overall network alarm management solution, which enables youto locate and troubleshoot faults quickly.
In addition, to simplify the troubleshooting, the N2000 BMS supports window switching. Forexample, it allows switching from the topological window to the alarm window, or switchingfrom the alarm window to a faulty port.
Security Management
The N2000 BMS manages the network based on different user rights and different domains. Itcan divide user rights based on users, user groups, operations, applications, or ACLs. It supportsthe following operations over the clients:l Automatic lock
l Forced disconnection
l Collection of user logs
Batch Service Provisioning
5 Device ManagementSmartAX MA5603T Optical Access Equipment
Product Description
5-4 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
The N2000 BMS supports batch service processing to reduce the time in deploying the serviceand responding to users' demands.
Backup and Loading of NE Data
The N2000 BMS provides manual or timed backup or loading of data of all NEs or a specifiedNE in the network. This enhances the security of the NE data in the network and decreases theload in large scale in-service loading of device software.
Database Management
The N2000 BMS provides the following:
l A tool to back up and restore the EMS database. This enhances security of the system data.
l A monitoring terminal to remotely monitor the running status of the EMS server and theusage of the EMS database.
In addition, the N2000 BMS supports the remote dual-system backup scheme to ensure thedatabase security.
Abundant Management Interfaces
The N2000 BMS provides various southbound network interfaces, such as Telnet, SYSLOGand SNMP for different management objects to realize rich element management functions.
In addition, the N2000 BMS provides standardized northbound interfaces such as SNMP andTL1. They provide automated alarm, topology, and data restoration functions to the OSS andthe network management system. This helps the carriers in setting up an overall support platformfor the network monitoring and automated service provisioning.
Environment and Power Supply Monitoring
The N2000 BMS monitors environment and power supply of the NEs in a centralized manner.This feature helps you to obtain information about the environment and the power supply intime.
Graphic User Interface
The N2000 BMS provides user-friendly graphic user interfaces, including the following:
l Network topology view
l Panel view
l Terminal management view
In addition, the N2000 BMS provides a complete and easy-to-use online help system to assistyou in the operation.
Configuration Management
The N2000 BMS provides multiple configuration functions for the MA5603T.
SmartAX MA5603T Optical Access EquipmentProduct Description 5 Device Management
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
5-5
5.3.4 Typical Networking ModesThe N2000 BMS can be networked with the MA5603T in the inband mode and outband mode.
Inband Mode
Inband mode refers to a networking mode for network device management that is implementedthrough the service channel provided by the managed devices. In this mode, the networkmanagement interaction information is delivered over the service channel provided by themanaged device.
Figure 5-2 shows the EMS networking in the inband mode.
Figure 5-2 Inband EMS networking
MA5603T MA5603T
Integrated EMS center
EMS client A EMS client B
N2000 BMS
BRAS
NOTEIn the figure, the blue line indicates the management channel. The MA5603T passes the IP network, passesthe BRAS authentication, and then reaches the NMS center.
The advantages of the inband networking are as follows:
l Flexible networking
l Cost-effective, because no additional device is required
The disadvantage of the inband networking is that maintenance tasks cannot be carried out whenthe service channel fails.
Outband Mode
5 Device ManagementSmartAX MA5603T Optical Access Equipment
Product Description
5-6 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
The outband mode refers to a networking mode for network device management that isimplemented through other channels, and not through the service channel. In this mode, themanagement channel is independent of the service channel.
Figure 5-3 shows the EMS networking in the outband mode.
Figure 5-3 Outband EMS networking
MA5603TMA5603T
Router
Maintenancenetwork port
Integrated EMS center
EMS client A EMS client B
N2000 BMS
Maintenancenetwork port
NOTEIn the figure, the blue line indicates the management channel. The MA5603T is directly connected to theNMS center.
The advantages of the outband networking are as follows:
l Channels for device management are more reliable than those in the inband mode.
l The N2000 BMS can timely locate the fault in a managed device, and monitor the manageddevice in real time.
The disadvantage of the outband networking is that additional devices are required to providemaintenance channels that are independent of service channels.
SmartAX MA5603T Optical Access EquipmentProduct Description 5 Device Management
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
5-7
6 Technical Specifications and StandardsCompliance
About This Chapter
This topic helps you to learn the parameters and specifications of the MA5603T, and alsoprovides the standards that the MA5603T complies with.
6.1 Device ParametersThis topic describes the running environment requirements, power supply parameters, deviceparameters of the MA5603T.
6.2 System Performance and CapacityThis topic describes the system performance, device configuration, and port types and quantityof the MA5603T.
6.3 Service and Maintenance CharacteristicsThis topic describes the service and maintenance characteristics of the MA5603T.
6.4 Standards ComplianceThis topic provides the reliability standards, packaging standards, and environment adaptabilitystandards of the MA5603T.
SmartAX MA5603T Optical Access EquipmentProduct Description 6 Technical Specifications and Standards Compliance
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
6-1
6.1 Device ParametersThis topic describes the running environment requirements, power supply parameters, deviceparameters of the MA5603T.
6.1.1 Running EnvironmentThis topic describes the running environment requirements of the MA5603T.
6.1.2 Power Supply ParametersThis topic describes the power supply parameters of the MA5603T.
6.1.3 Shelf ParametersThis topic describes the dimension/Weight (Empty) and maximum power consumption of theMA5603T.
6.1.4 Board ParametersThis topic describes the Board Parameters of the MA5603T.
6.1.1 Running EnvironmentThis topic describes the running environment requirements of the MA5603T.
Table 6-1 Environment parameters of the MA5603T
Parameter Specification
Ambient workingtemperature
-25°C to +55°C
Ambient workinghumidity
5% RH to 95% RH
Air pressure 70 kPa to 106 kPa
Altitude ≤ 4000 m
6.1.2 Power Supply ParametersThis topic describes the power supply parameters of the MA5603T.
Table 6-2 Power supply parameters of the MA5603T
Parameter Specification
Power supply DC power supply
Working voltage range -38.4 V to -72 V
6 Technical Specifications and Standards ComplianceSmartAX MA5603T Optical Access Equipment
Product Description
6-2 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
6.1.3 Shelf ParametersThis topic describes the dimension/Weight (Empty) and maximum power consumption of theMA5603T.
Shelf Parameters
Table 6-3 Parameters of the MA5603T shelf
Item Dimensions (W x D xH)
MaximumPowerConsumptionof a Fully-Loaded Shelf
Weight(Empty)
Chassis (without mountingbrackets)
442 mm x 283.2 mm x263.9 mm
770 W 7 kg
Chassis (with mountingbrackets of IECstandard))
482.6 mm x 283.2 mm x263.9 mm
Chassis (with mountingbrackets of ETSIstandard)
535 mm x 283.2 mm x263.9 mm
- -
6.1.4 Board ParametersThis topic describes the Board Parameters of the MA5603T.
Table 6-4 Parameters of the MA5603T boards
Board Dimensions (W x D x H) Maximum Power Consumption
SCUL 22.86 mm x 208 mm x 395.4mm
42 W
OPFA 22.86 mm x 208 mm x 395.4mm
31 W
GPBC 22.86 mm x 208 mm x 395.4mm
78 W
GPBD 22.86 mm x 208 mm x 395.4mm
55 W
ETHA 22.86 mm x 208 mm x 395.4mm
27 W
TOPA 22.86 mm x 208 mm x 395.4mm
25 W
PRTE 25.4 mm x 208 mm x 105.1mm
0.2 W
SmartAX MA5603T Optical Access EquipmentProduct Description 6 Technical Specifications and Standards Compliance
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
6-3
Board Dimensions (W x D x H) Maximum Power Consumption
GICF 25.4 mm x 208 mm x 197.2mm
5 W
GICG 25.4 mm x 208 mm x 197.2mm
9 W
X1CA 25.4 mm x 208 mm x 197.2mm
11 W
X2CA 25.4 mm x 208 mm x 197.2mm
21 W
FMCA 248 mm x 85 mm x 1.6 mm 84 W(including 6 fans)
6.2 System Performance and CapacityThis topic describes the system performance, device configuration, and port types and quantityof the MA5603T.
System Performance
Table 6-5 lists the system performance parameters.
Table 6-5 System performance parameters
Parameter Specification
Backplane bus switchingcapacity
320 Gbit/s
System L2 packet forwarding 600 Mpps
Control board switchingcapacity
400 Gbit/s
Device Configuration
Table 6-6 lists the device configurations.
Table 6-6 Device configuration parameters
Parameter Specification
Management port l One 10/100 Mbit/s network port for maintenance
l One serial port for local configuration
l One environment monitoring port
6 Technical Specifications and Standards ComplianceSmartAX MA5603T Optical Access Equipment
Product Description
6-4 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Parameter Specification
Maximum number of GEupstream ports in a shelf
4 GE Optical ports (GICF)4 GE Electrical ports (GICG)128 GE Optical port (ETHB)
Maximum number of 10GEupstream ports in a shelf
2 (X1CA)4 (X2CA)4 (X2CS)
Maximum number of GPONports in a shelf
48
Maximum number of GPONONTs in a shelf
3072
Port Type and Quantity
Table 6-7 lists the management ports.
Table 6-7 MA5603T management ports
Port Type Port Specification Provided by Ports per Board
Outband Ethernet port 10Base-Tx/100Base-Tx
SCUL 1
Local serial port Console SCUL 1
Table 6-8 lists the upstream ports.
Table 6-8 MA5603T upstream ports
Port Type Port Specification Provided by Ports per Board
E1 port E1 NH1A 16
STM-1 port STM-1 O2CE 2
GE optical port 1000Base-Sx/Lx GICF 2
GE electrical port 1000Base-Tx GICG 2
10GE optical port 10 Gbit/s X1CAX2CAX2CS
122
Table 6-9 lists the service ports.
SmartAX MA5603T Optical Access EquipmentProduct Description 6 Technical Specifications and Standards Compliance
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
6-5
Table 6-9 MA5603T service ports
Port Type Provided by Ports per Board
P2P FE optical port OPFA 16
GPON port GPBCGPBD
48
GE optical port ETHAETHB
88
6.3 Service and Maintenance CharacteristicsThis topic describes the service and maintenance characteristics of the MA5603T.
Service CharacteristicsTable 6-10 lists the service characteristics of the MA5603T.
Table 6-10 Service characteristics of the MA5603T
Category Specification
Wire speed L2/L3switching
Supported by all ports. All the ports support line rate forwarding
VLAN Up to 4K VLANs based on 802.1q, in the range of 1 to 409315 reserved VLANs, whose ID range can be adjustedUp to 4K VLANs those can be transparently transmitted througha port
Dropping of downstream broadcast packets, unknown unicastpackets, and unknown multicast packets on a service board basedon the VLAN
Dropping of upstream multicast packets on a service board basedon the VLAN
Standard VLAN, smart VLAN and MUX VLAN
Smart VLAN and MUX VLAN applications at the layer 2
QinQ VLAN and VLAN stacking
VLAN QinQ priority configuration
Use of the C-VLAN ID and priority at the user side for the innerVLAN and priority of a traffic stream by default
VLAN stacking management based on the port or traffic stream
VLAN-based loopback
6 Technical Specifications and Standards ComplianceSmartAX MA5603T Optical Access Equipment
Product Description
6-6 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Category Specification
Multicast Up to 4K multicast groups
32 multicast groups for a multicast user at the same time
IGMP proxy and IGMP snooping
Controllable multicast to implement:l Multicast access right control
l Multicast source control
l Multicast user management
TDM private line service E1/STM-1 port
TDM over GEM mode
Stratum-3 clock Stratum-3 clock required by the TDM private line access service
GE extension Extension and subtending of the GE upstream port
MSTP Compatible with STP/RSTP
ARP ARP
ARP proxy
Port aggregation/Portprotection
The GIC board supports up to four aggregated port groups. Upto eight ports at the same rate can be aggregated in a group.
LACP
The GIC board supports port protection pairs
Ethernet clock synchronization
Inter-board aggregation of the ETHB board
Active/Standbyswitchover
Active/standby switchover of the control boards
Broadcast stormsuppression
Broadcast storm suppression based on a certain broadbandpercentage
Port mirroring Port mirroring based on port, MAC address, IP address, or TCP/UDP port number
MAC address table Address learning in compliance with IEEE 802.1d
Management of the maximum number of learnable MACaddresses based on the traffic stream.
Configuration and management of dynamic and static MACaddresses
Up to 16k MAC addresses
Flow control IEEE 802.3x flow control (full-duplex)
SmartAX MA5603T Optical Access EquipmentProduct Description 6 Technical Specifications and Standards Compliance
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
6-7
Category Specification
Back pressure flow control (half-duplex)
QoS SBA/DBA of the GPON line
The traffic stream classification based on the GEM port
Eight priority queues and the combination of the SP and WRRalgorithms
CoS (802.1p) and traffic prioritization (802.1p is used bydefault.)
Marking of the IP priority or DSCP priority based on ACL rules
Re-marking of the 802.1p priority
Re-marking of the CoS priority
Flexible mapping of CoS priorities and scheduling queues
Re-marking of double rate tricolor priority
Rate limit based on the port or the CoS priority
The following activities based on the traffic rule:l Packet filtering
l Packet redirection
l Flow mirroring
l Traffic statistics
l Traffic policing
l Queue scheduling on a port
l Rate limit on a port
l Priority strategies
l VLAN change strategies
Ethernet OAM 802.1ag at the user side
Security Hierarchical right control, that is, different rights for users atdifferent levels
L2 user isolation and controlled mutual access
RADIUS authentication of the management users
DHCP Option60 to identify the device type at the user end
Prevention of DoS attacks on the system
ACL-based access control
Prevention of IP/MAC Spoofing for DHCP users
Prevention of MAC Spoofing for PPPoE users
6 Technical Specifications and Standards ComplianceSmartAX MA5603T Optical Access Equipment
Product Description
6-8 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Category Specification
Restriction on the number of MAC addresses based on the trafficstream
Static MAC address configuration based on the traffic stream
IP address binding based on the traffic stream
ONU/ONT SN and password authentication
MAC address filtering on the user side
PITP and DHCP Option82 to uniquely identify a user
SSH V2
Downstream FEC
AES 128-bit encryption
GPON terminalmanagement
ONU/ONT management based on OMCI
Management of different types of ONUs/ONTs through terminalprofiles
Pre-configuration and auto-discovery of the ONU/ONT
ONU/ONT diagnosis, test, and fault management
GPON port 4096 GEM ports
256 T-CONTs
The Alloc-ID is in the range of 0 to 4095.
Each port of an ONT supports up to eight VLANs.
Management and Maintenance Characteristics
Table 6-11 lists the maintenance and management characteristics of the MA5603T.
Table 6-11 Maintenance characteristics of the MA5603T
Category Specification
Management Console configuration
Remote SSH/Telnet configuration
CLI configuration and Radius authentication
SNMPv1, SNMPv2, SNMPv3 management
Management through the N2000 BMS
System log
SmartAX MA5603T Optical Access EquipmentProduct Description 6 Technical Specifications and Standards Compliance
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
6-9
Category Specification
Hierarchical alarmsAlarm filteringAlarm storm suppression
Maintenance Output of debugging information
Ping
Trace Route
Remote SSH/Telnet maintenance
Loading andupgrading
Loading and upgrading through Xmodem
Loading and upgrading through FTP, TFTP, and SFTP
Loading and upgrading upon startupOnline loading and upgradingAutomatic reporting of the alarms, logs, and data to the FTP server
Performancestatistics
Ethernet performance statistics on the network side
Performance statistics of the ports at the service access side
Performance statistics of terminal traffic
Multicast traffic statistics
IGMP proxy and IGMP snooping performance statistics
DHCP Option82 performance statistics
6.4 Standards ComplianceThis topic provides the reliability standards, packaging standards, and environment adaptabilitystandards of the MA5603T.
Environment Adaptability StandardsStandard Name
IEC 60529 Degrees of protection provided by enclosures (IP Code)
ETS 300 019-1-3 Environmental Engineering (EE); Environmental conditions andenvironmental tests for telecommunications equipment; Part 1-3:Classification of environmental conditions; Stationary use atweatherprotected locations
6 Technical Specifications and Standards ComplianceSmartAX MA5603T Optical Access Equipment
Product Description
6-10 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Electromagnetism Compatibility StandardsStandard Name
IEC 61000-4-2 Electromagnetic compatibility-Part 4-2: Testing and measurementtechniques-Electrostatic discharge immunity test
IEC 61000-4-3 Electromagnetic compatibility (EMC) - Part 4-3: Testing andmeasurement techniques-Radiated, radio-frequency,electromagnetic field immunity test
IEC 61000-4-4 Electromagnetic compatibility (EMC) - Part 4-4: Testing andmeasurement techniques-Electrical fast transient/burst immunitytest
IEC 61000-4-5 Electromagnetic compatibility (EMC) - Part 4-5: Testing andmeasurement techniques-Surge immunity test
IEC 61000-4-6 Electromagnetic compatibility (EMC) - Part 4-6: Testing andmeasurement techniques-Immunity to conducted disturbances,induced by radio-frequency fields
EN 61000-4-29 Electromagnetic compatibility (EMC) - Part 4-29: Testing andmeasurement techniques-Voltage dips, short interruptions andvoltage variations on d.c. input power port immunity tests
EN 61000-4-2 Electromagnetic compatibility (EMC) Section 4.2 Electrostaticdischarge immunity test- Basic EMC Publication
EN 61000-4-3 Electromagnetic compatibility Part 4-3: Testing and measurementtechniques-Radiated, radio-frequency, electromagnetic fieldimmunity test
EN 61000-4-4 Electromagnetic compatibility Part 4: Testing and measurementtechniques Section 4: Electrical fast transient/burst immunity test-Basic EMC publication
EN 61000-4-5 Electromagnetic compatibility (EMC)- Part 4-5: Testing andmeasurement techniques-Surge immunity test
EN 61000-4-6 Electromagnetic compatibility (EMC) - Part 4: Testing andmeasurement techniques Section 6: immunity to conducteddisturbance, induced by radio-frequency fields
IEC 61000-4-29 Electromagnetic compatibility (EMC) - Part 4-29: Testing andmeasurement techniques-Voltage dips, short interruptions andvoltage variations on d.c. input power port immunity tests
ETSI EN 300 386V1.3.3
Electromagnetic compatibility and Radio spectrum Matters (ERM);Telecommunication network equipment; ElectromagneticCompatibility (EMC) requirements
EN55022 Information technology equipment-Radio disturbancecharacteristics- Limits and methods of measurement
EN55024 Information technology equipment-Immunity characteristics-Limits and methods of measurement
SmartAX MA5603T Optical Access EquipmentProduct Description 6 Technical Specifications and Standards Compliance
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
6-11
Standard Name
ITU-T K.20 Resistibility of telecommunication equipment installed in atelecommunications centre to overvoltages and overcurrents
CISPR 22 Information technology equipment-Radio disturbancecharacteristics-Limits and methods of measurement
CISPR24 Information technology equipment-immunity characteristics -limits and methods of measurement
ITU-T K.32 Immunity requirements and test methods for electrostatic dischargeto telecommunication equipment - Generic EMC Recommendation
ITU-T K.44 SERIES K: PROTECTION AGAINST INTERFERENCEResistibility test for telecommunication equipment exposed toovervoltages and overcurrents - Basic recommendation
Safety Standards
Standard Name
EN 60950-1 Information Technology Equipment - safety - Part 1: GeneralRequirements
EN 60825-1 Safety of laser products - Part 1- Equipment classification,requirement and user's guide
EN 60825-2 Safety of laser products - Part 2- Safety of optical fibrecommunication
IEC 60825-1 Safety of laser products - Part 1- Equipment classification,requirement and user's guide
IEC 60825-2 Safety of laser products - Part 2- Safety of optical fibrecommunication
IEC 60950-1 Information Technology Equipment - safety - Part 1: GeneralRequirements
Other International Standards
Standard Name
ITU-T G.983.3 A broadband optical access system with increased service capability bywavelength allocation
ITU-T G.983.3Amendment 1
A broadband optical access system with increased service capability bywavelength allocation Amendment 1
ITU-T G.983.4 A broadband optical access system with increased service capability usingdynamic bandwidth assignment
6 Technical Specifications and Standards ComplianceSmartAX MA5603T Optical Access Equipment
Product Description
6-12 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
Standard Name
ITU-T G.983.5 A broadband optical access system with enhanced survivability
ITU-T G.652 Characteristics of a single-mode optical fibre and cable
ITU-T G.692 Optical interfaces for multi-channel systems with optical amplifiers
ITU-T G.872 Architecture of optical transport network
ITU-T G.873 Optical transport networks requirements
ITU-T G.911 Parameters and calculation methodologies for reliability and availabilityof fiber optic systems
Draft prETS 300672
TM 1 Relevant generic characteristics of optical amplifier devices andsub-systems
ITU-T M.3010 Principles for a Telecommunications management network
ITU-T -G.704 Synchronous Frame Structures Used at Primary Hierarchical Levels, July1995.
ITU-T G.703 Physical/electrical characteristics of hierarchical digital interfaces
ITU-T G.823 The control of jitter and wander within digital networks which are basedon the 2048 kbit/s hierarchy
ITU-T G.957 Optical interfaces for equipments and systems relating to the synchronousdigital hierarchy
ITU-T G.825 The control of jitter and wander within digital networks which are basedon the synchronous digital hierarchy (SDH)
RFC2236 IGMPv2
RFC1155 Structure and identifier of the Internet management information based onTCP/IP
RFC1493 Bridge MIB
RFC1643 Definitions of Managed Objects for the Ethernet-like Interface Types
RFC2236 Internet Group Management Protocol, Version 2 Internet
RFC2613 Remote Network Monitoring MIB Extensions for Switched Networks
RFC2652 Ethernet Interface MIB
RFC1027 Using ARP to implement transparent subnet gateways (ARP Proxy)
Internet-Draft Virtual Broadband Access Server Protocol for communicating betweenBAS and IP-DSLAM (draft-abel-vbas-01.txt)
SmartAX MA5603T Optical Access EquipmentProduct Description 6 Technical Specifications and Standards Compliance
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
6-13
A Acronyms and Abbreviations
A
ACL access control list
AES Advanced Encryption Standard
ARP Address Resolution Protocol
B
BITS building integrated timing supply system
BRAS broadband remote access server
BSC base station controller
C
CAC connection admission control
CAR committed access rate
CATV cable TV
CLI command line interface
CoS class of service
CO central office
CSMA carrier sense multiple access
D
DBA dynamic bandwidth allocation
DHCP Dynamic Host Configuration Protocol
DoS denial of service
SmartAX MA5603T Optical Access EquipmentProduct Description A Acronyms and Abbreviations
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
A-1
DSLAM digital subscriber line access multiplexer
E
ESD electrostatic discharge
ETS European Telecommunication Standards
ETSI European Telecommunication Standards Institute
F
FE fast Ethernet
FEC forward error correction
FTP File Transfer Protocol
FTTB fiber to the building
FTTH fiber to the home
G
GE gigabit Ethernet
GEM GPON encapsulation mode
GPON gigabit-capable passive optical network
I
IAS integrated access software
ICMP Internet Control Message Protocol
IEC International Electrotechnical Commission
IEEE Institute of Electrical and Electronics Engineers
IGMP Internet Group Management Protocol
IP Internet Protocol
IPTV IP Television
ISP internet service provider
ITU-T International Telecommunication Union - TelecommunicationStandardization Sector
L
LACP Link Aggregation Control Protocol
A Acronyms and AbbreviationsSmartAX MA5603T Optical Access Equipment
Product Description
A-2 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)
LAN local area network
M
MAC medium access control
MAP multi-media access platform
MIB management information base
MSTP Multiple Spanning Tree Protocol
N
NMS network management system
O
OAM operation, administration and management
OLT optical line terminal
OMCI ONT management and control interface
ONT optical network terminal
ONU optical network unit
OSS operation support system
P
P2P point to point
PC personal computer
PITP Policy Information Transfer Protocol
PMD physical media dependent
PPP Point to Point Protocol
Q
QinQ 802.1q in 802.1q
QoS quality of service
R
RADIUS remote authentication dial in user service
SmartAX MA5603T Optical Access EquipmentProduct Description A Acronyms and Abbreviations
Issue 02 (2010-01-28) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
A-3
RSTP Rapid Spanning Tree Protocol
S
SBA static bandwidth allocation
SDH synchronous digital hierarchy
SN serial number
SNMP Simple Network Management Protocol
SP strict priority
SQL structured query language
STB set top box
STP Spanning Tree Protocol
T
T-CONT transmission container
TCP/IP Transmission Control Protocol/Internet Protocol
TDM time division multiplexing
TFTP Trivial File Transfer Protocol
TG trunk gateway
TL1 transaction language 1
TV television
U
UDP User Datagram Protocol
V
VLAN virtual LAN
W
WDM wavelength division multiplexing
WRR weighted round robin
A Acronyms and AbbreviationsSmartAX MA5603T Optical Access Equipment
Product Description
A-4 Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-01-28)