luXeon uV Fc line - Mouser Electronics · LED that can be reflowed onto a substrate with standard...

2
ILLUMINATION PB185 LUXEON UV FC Line Product Brief ©2017 Lumileds Holding B.V. All rights reserved. With FlipChip platform technology, LUXEON UV FC Line contains both 1mm 2 and 2mm 2 die sizes and is the smallest and highest power density (W/cm 2 ) ultraviolet with FlipChip Technology in a Chip Scale Package (CSP) LED that can be reflowed onto a substrate with standard surface mount (SMT) equipment and process. LUXEON UV FC Line LEDs enable tighter beam control and high packing density of LEDs on a chip on board solution and completely eliminate wire bonds in the system. LUXEON UV FC Line is the ideal choice for cost sensitive applications to achieve high irradiance at high current density, maximizing W/$ by taking advantage of lowest thermal resistance of a CSP device. FEATURES AND BENEFITS PRIMARY APPLICATIONS Ultraviolet wavelength range of 380nm to 420nm for a range of options Specialty Lighting Micro sized CSP: 1.0mm 2 and 2.0mm 2 package for design flexibility and packing density Analytical Instrumentation No wire bonds allows for direct attach and reflow – Curing 5-sided emitter with batwing radiation pattern – Medical Low thermal resistance for leading system level W/$ – Security Maximum drive current of 1A/mm 2 delivers superior flux for reduced LED count LUXEON UV FC Line Unique LED enabling limitless design freedom

Transcript of luXeon uV Fc line - Mouser Electronics · LED that can be reflowed onto a substrate with standard...

Page 1: luXeon uV Fc line - Mouser Electronics · LED that can be reflowed onto a substrate with standard surface mount (SMT) equipment and process. LUXEON UV FC Line LEDs enable tighter

IllumInatIon

PB185 LUXEON UV FC Line Product Brief ©2017 Lumileds Holding B.V. All rights reserved.

With FlipChip platform technology, LUXEON UV FC Line contains both

1mm2 and 2mm2 die sizes and is the smallest and highest power density

(W/cm2) ultraviolet with FlipChip Technology in a Chip Scale Package (CSP)

LED that can be reflowed onto a substrate with standard surface mount

(SMT) equipment and process. LUXEON UV FC Line LEDs enable tighter

beam control and high packing density of LEDs on a chip on board solution

and completely eliminate wire bonds in the system. LUXEON UV FC Line is

the ideal choice for cost sensitive applications to achieve high irradiance

at high current density, maximizing W/$ by taking advantage of lowest

thermal resistance of a CSP device.

Features and BeneFIts PrImary aPPlIcatIons

Ultraviolet wavelength range of 380nm to 420nm for a range of options Specialty Lighting

Micro sized CSP: 1.0mm2 and 2.0mm2 package for design flexibility and packing density – Analytical Instrumentation

No wire bonds allows for direct attach and reflow – Curing

5-sided emitter with batwing radiation pattern – Medical

Low thermal resistance for leading system level W/$ – Security

Maximum drive current of 1A/mm2 delivers superior flux for reduced LED count

luXeon uV Fc lineUnique LED enabling limitless design freedom

Page 2: luXeon uV Fc line - Mouser Electronics · LED that can be reflowed onto a substrate with standard surface mount (SMT) equipment and process. LUXEON UV FC Line LEDs enable tighter

PB185 LUXEON UV FC LineProduct Brief 20170710

©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries.

lumileds.com

Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agree-ment with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents.

LUXEON UV FC1 product performance at 500mA and 1000mA, Tj=25ºC.

PeaK WaVelength [1]

(nm)

tyPIcal radIometrIc PoWer [2] (mW)Part numBer

500ma 1000ma

410–420650 1228 LxF3-U410100006001

750 1417 LxF3-U410100007001

400–410650 1228 LxF3-U400100006001

750 1417 LxF3-U400100007001

390–400

550 1039 LxF3-U390100005001

650 1228 LxF3-U390100006001

750 1417 LxF3-U390100007001

380–390

350 661 LxF3-U380100003001

450 850 LxF3-U380100004001

530 1001 LxF3-U380100005001Notes:1. Lumileds maintains a tolerance of ±2nm for peak wavelength measurements.2. Lumileds maintains a tolerance of ±10% for radiometric power measurements.

LUXEON UV FC2 product performance at 1000mA and 2000mA, Tj=25ºC.

PeaK WaVelength [1]

(nm)

tyPIcal radIometrIc PoWer [2] (mW)Part numBer

1000ma 2000ma

410–4201300 2340 LxF3-U410200012001

1500 2700 LxF3-U410200014001

400–410

1100 1980 LxF3-U400200010001

1300 2340 LxF3-U400200012001

1450 2610 LxF3-U400200014001

390–4001100 1980 LxF3-U390200010001

1300 2340 LxF3-U390200012001

380–390

700 1260 LxF3-U380200006001

900 1620 LxF3-U380200008001

1050 1890 LxF3-U380200010001Notes:1. Lumileds maintains a tolerance of ±2nm for peak wavelength measurements.2. Lumileds maintains a tolerance of ±10% for radiometric power measurements.