Lutron - · PDF file...

Click here to load reader

  • date post

    07-Oct-2020
  • Category

    Documents

  • view

    22
  • download

    0

Embed Size (px)

Transcript of Lutron - · PDF file...

  • SPECIF ICAT ION SUBMITTAL Page 1 Job Name:

    Job Number:

    Model Numbers:

    Lutron® Tensioned Roller Shade (4.75 inch frame) Chassis Specification

    086-130 1 08.20.09

    Lutron Tensioned Roller Shade

    Lutron | Tensioned Roller Shade (4.75 inch frame)

    Tensioned Roller shades utilize the ultra-quiet, precision controlled Drive. The tensioned roller shade Drive is housed inside the frame assembly and controls the movement of the shade, keeps track of the shade’s position, and adjusts to the user’s desired positions.

    Aesthetics Fascia eliminates light gaps around fabric when closed Concealed cable guides maximize view through skylight when open Wide variety of high performance fabrics to enhance décor Fiberglass based fabrics available for sheer, dim-out,

    and blackout Design Unique tension-absorbing frame eliminates stress on the surrounding ceiling structure Reliable performance under extreme temperatures

    Control Tensioned roller shades are compatible with QED, QS and QS Wireless drive units

    Tensioned shade components designed for ultra-quiet operation (will not exceed 44 dBA measured 3 ft (1 m) from the EDU)

    Installation Flexible installation from -135° to +135° Inside, recessed, and surface mounting options allow system to fit a wide variety of skylight and

    window applications Can be shipped pre-assembled or as components to maximize on-site installation convenience and time savings (Refer to SCT for your application).

  • SPECIF ICAT ION SUBMITTAL Page 2 Job Name:

    Job Number:

    Model Numbers:

    Lutron® Tensioned Roller Shade (4.75 inch frame) Chassis Specification

    086-130 2 08.20.09

    Shade options Mounting options The frame can be mounted inside of, recessed into, or outside of the window opening. It can also be mounted inside, or recessed into a window frame.

    Fabric roll orientation Fabric unwinds from roller closest to the glass.

    Drive side options Drive can be located on the left or right side of the shade.

    Left drive side Right drive side

    Hem bar Half-wrap hem bar

    Regular roll

    glass

    Looking up

    Skylight Mounts Inside Recessed Surface

    Drive

    Looking up

    Window Mounts Inside Recessed

    Fabric options Tensioned roller shades are available in a wide variety of fabric types. Sheer – UV protection, translucent Dim-out – UV protection, minimal translucence Blackout – Maximum UV protection, complete light block NOTE For complete fabric selection, please consult the SCT or customer service.

    0˚ to 135˚ (Angled Shade)

    -1˚ to -135˚ (Bottom-up Shade)

    Installation angle

  • SPECIF ICAT ION SUBMITTAL Page 3 Job Name:

    Job Number:

    Model Numbers:

    Lutron® Tensioned Roller Shade (4.75 inch frame) Chassis Specification

    086-130 3 08.20.09

    Frame Information System dimensions System is concealed within its frame. Frame thickness and depth are standard regardless of system size.

    Drive Side4.75 in (121 mm) 4.65 in

    (118 mm)

    2.25 in (57 mm)

    2.25 in (57 mm)

    Shipping options System ships pre-assembled (units up to 30 sq ft [2.8 sq m] ) or as components. (Refer to Lutron Shade Configuration Tool (SCT) for your application).

    Angles of Installation Frame can be installed at any angle between -135 and +135. It may be used for angled windows, skylights or bottom-up applications.

    -135°

    -90°

    -45°

    45° 90°

    135°

    Angled Shades

    Skylight Shades

    Bottom-up Shades

  • SPECIF ICAT ION SUBMITTAL Page 4 Job Name:

    Job Number:

    Model Numbers:

    Lutron® Tensioned Roller Shade (4.75 inch frame) Chassis Specification

    086-130 4 08.20.09

    24 in (610 mm)

    96 in (2438 mm)

    36 in (914 mm)

    144 in (3658 mm)

    Drive side (top)

    Frame Thickness

    Minimum system size: 24 in wide x 36 in long (610 mm wide x 914 mm long)

    Maximum system size: 96 in wide x 144 in long (2438 mm wide x 3658 mm long)

    Frame thickness: Drive end: 4.65 in (118 mm) Non-drive end and sides: 2.25 in (57 mm)

    System parameters This chart illustrates general system dimensions of tensioned roller shade system. System contains frame and shade.

    NOTE Tensioned roller shade dimension limitations are a function of fabric selection and application angle. Please consult the SCT or customer service for details.