LUNCH: 12:00 pm - 1:00 pm CORDIALLY...
Transcript of LUNCH: 12:00 pm - 1:00 pm CORDIALLY...
YOU ARE CORDIALLY INVITED
to attend the IDN-KANSAS CITY
Trade Show
THURSDAYAPRIL 19, 2018
11:00 - 2:00LUNCH: 12:00 pm - 1:00 pm
Holiday Inn & Suites8787 Reeder Rd.
Overland Park, KS 66214
LOOK INSIDE FOR MORE INFORMATION
2-DAYS OF EDUCATIONWEDNESDAY, APRIL 18, 20188:00 AM - 5:00 PMTHURSDAY, APRIL 19, 20188:00 AM - 12:00 PM
IDN-KANSAS CITY TRADE SHOW
LOCATIONHoliday Inn & Suites
8787 Reeder Rd.Overland Park, KS 66214
SHOW DATEAPRIL 19, 2018
11:00 a.m. - 2:00 p.m. Lunch Provided
12:00 p.m. - 1:00 p.m.
PARTICIPATING MANUFACTURERS
HPC, a Hudson Lock Company
,
PAGE#
2
Now Assa Abloy
Now Assa Abloy
EDUCATIONAPRIL 18, 2018
Class #1 - 8:00 am - 12:00 pm Class #2 - 1:00 pm - 5:00 pm Class #3 - 8:00 am - 5:00 pm
LOCATIONHoliday Inn & Suites
8787 Reeder Rd.Overland Park, KS 66214
DAY #1 - WEDNESDAY, APRIL 18, 2018
IDN-KANSAS CITY TRADE SHOWEDUCATION
SHOW DATEAPRIL 19, 2018
11:00 a.m. - 2:00 p.m. Lunch Provided
12:00 p.m. - 1:00 p.m.
On-Site Registration for Classes: Space is limited and available on a first come, first served basis. Registration on-site may be allowed if there are openings. Pre-Registration is encouraged.
PAGE#
3
DATE: Wednesday, April 18, 2018TIME: 8:00 a.m. - 12:00 p.m.PRESENTER: Rodger SchmidtCOST: See Page 8CLASS SIZE: Maximum 20LOCATION: Wyandotte Room
WHAT YOU WILL LEARN: This entry level course is designed to educate the participants in the basic electronic knowledge needed to wire an electronic locking system. The class includes a balance of instructional and hands-on exercises. The following subjects are covered:• Key Figures in Electricity• Voltage, Current and Resistance• AC & DC Electricity• Switches and Relays• Normally Open – Normally Closed Circuits• Fail Safe/Fail Secure lock wiring• Hands-on basic system wiring and operation• Series versus Parallel Wiring• Use of Multi-meters – How to test• Multi-meter Circuit• Testing for Volts & Amps• Electronic Components
Basic Low Voltage Electricity for Installers1
DATE: Wednesday, April 18, 2018TIME: 1:00 p.m. - 5:00 p.m.PRESENTER: Rodger SchmidtCOST: See Page 8CLASS SIZE: Maximum 20LOCATION: Wyandotte Room
WHAT YOU WILL LEARN: This course is designed for participants with previous basic electronic knowledge and use of a multimeter. Covered in this course are advanced access control and system wiring techniques, installation and prod-uct troubleshooting. The class includes instructional and hands-on exercises covering the following sub-jects:• Fire Alarm Interface• Fail safe lock system wiring• Fail secure lock system wiring• Basic system trouble shooting - Using multi-meter• Wiring trouble shooting - What you should test• DK-26 and Power Supply Trouble shooting• Magnetic lock and electric strike troubleshooting• Touch sense bar troubleshooting• Digital keypad troubleshooting• Basic access control systems troubleshooting
2 Advanced Electronic System Wiring & Basic Troubleshooting
ALOA #AATP-AA007 NJCEUCREDITS
OFFERED
ALOA #AATP-AA007 NJCEUCREDITS
OFFERED
EDUCATIONAPRIL 18, 2018
Class #1 - 8:00 am - 12:00 pm Class #2 - 1:00 pm - 5:00 pm Class #3 - 8:00 am - 5:00 pm
LOCATIONHoliday Inn & Suites
8787 Reeder Rd.Overland Park, KS 66214
DAY #1 - WEDNESDAY, APRIL 18, 2018
IDN-KANSAS CITY TRADE SHOWEDUCATION
SHOW DATEAPRIL 19, 2018
11:00 a.m. - 2:00 p.m. Lunch Provided
12:00 p.m. - 1:00 p.m.
On-Site Registration for Classes: Space is limited and available on a first come, first served basis. Registration on-site may be allowed if there are openings. Pre-Registration is encouraged.
PAGE#
4
HPC, a Hudson Lock Company
WHAT YOU WILL LEARN: Master Keying is a skill that everyone in the Physical Security Industry must understand. Knowing how to write and implement a system makes you essential to your employer’s and customer’s success. Knowing how to do this quickly and accurately makes you an extremely valuable asset.
In this class, you will learn how to write a master key system. You will learn 3 different types of systems and when to use them. You’ll learn to write a system on paper and in software. And you’ll learn the fast key generat-ing secrets that successful Locksmiths have been using for years.
After taking this class with HPC, Hudson Lock, and IDN you will walk away with the ability to writemaster key systems and generate more business.
Instructor: Marty Jalove, has been teaching master keying for over 15 years and has helped in thedevelopment of master keying software and the key machines that we’ll be cutting keys on at this class
3 Understanding Master Keying Training Class
DATE: Wednesday, April 18, 2018TIME: 8:00 a.m. - 5:00 p.m. PRESENTER: Marty Jalove
COST: See Page 8CLASS SIZE: Maximum 20LOCATION: Douglas Room
DAY #2 - THURSDAY, APRIL 19, 2018
IDN-KANSAS CITYTRADE SHOWEDUCATION
EDUCATIONAPRIL 19, 2018
Class #4 - 8:00 am - 12:00 pm Class #5 - 8:00 am - 11:00 am Class #6 - 2:00 pm - 5:00 pm
LOCATIONHoliday Inn & Suites
8787 Reeder Rd.Overland Park, KS 66214
SHOW DATEAPRIL 19, 2018
11:00 a.m. - 2:00 p.m. Lunch Provided
12:00 p.m. - 1:00 p.m.
On-Site Registration for Classes: Space is limited and available on a first come, first served basis. Registration on-site may be allowed if there are openings. Pre-Registration is encouraged.
PAGE#
5
DATE: Thursday, April 19, 2018TIME: 8:00 a.m. - 12:00 p.m.PRESENTER: Rodger SchmidtCOST: See Page 8CLASS SIZE: Maximum 20LOCATION: Wyandotte Room
WHAT YOU WILL LEARN: Students will be shown the easiest techniques for cutting and installing an electric strike into a hollow metal door frame. Cutting tool selection and use of the HES metal template kit is demonstrated. Students will be allowed to individually measure and cut in a strike. With instructional and hands-on exercises covering the following subjects:
• Codes and Standards• Fire Rated verses non-fire rated Openings• Electric strike application and selection• Frame and door types• Fail safe to fail secure conversion of HES strikes• 12 to 24 volt strike conversion• Solenoid testing and Trouble Shooting• Installation techniques• Safety• Hands on installation of electric strikes
HES Electric Strikes Applications & Installation4
DATE: Thursday, April 19, 2018TIME: 8:00 a.m. - 11:00 a.m.PRESENTER: Tony PresidioCOST: See Page 8CLASS SIZE: Maximum 20LOCATION: Shawnee II & III
COURSE DESCRIPTION:Present the features and benefits of Kaba Ilco & Advanced Diagnostics Products and what they can do for you. The class achieves this through a hands-on and lecture review on products and resources related to both product lines.
WHAT YOU WILL LEARN:• TCODE & MVP PRO review• Kaba-Ilco latest key cutting technology with emphasis
on the New Futura Pro• Kaba-Ilco latest transponder keys and cloning
capabilities RW4 Plus advantages• Smart Dongle & Smart 4 Car review and demonstration.• Programming Software review through hands-on
simulation• Customer Equipment review and updates performed• Hands–On Programming Demonstrations• Open discussion
NOTES:Customers are encouraged to bring their Advanced Diagnostic Equipment for review if possible.
5 Product Line Presentation
ALOA #AATP-AA011 NJCEU, ALABAMA CEU, MISSISSIPPI CEU
CREDITS OFFERED
DAY #2 - THURSDAY, APRIL 19, 2018
IDN-KANSAS CITYTRADE SHOWEDUCATION
EDUCATIONAPRIL 19, 2018
Class #4 - 8:00 am - 12:00 pm Class #5 - 8:00 am - 11:00 am Class #6 - 2:00 pm - 5:00 pm
LOCATIONHoliday Inn & Suites
8787 Reeder Rd.Overland Park, KS 66214
SHOW DATEAPRIL 19, 2018
11:00 a.m. - 2:00 p.m. Lunch Provided
12:00 p.m. - 1:00 p.m.
On-Site Registration for Classes: Space is limited and available on a first come, first served basis. Registration on-site may be allowed if there are openings. Pre-Registration is encouraged.
PAGE#
6
WHAT YOU WILL LEARN: 1. Interchangeable core keyway types provided by Best A. Standard B. Premium C. Preferred D. Cormax (keyway families and backwards
compatability)2. Best Key System types (A2, A3, and A4) 3. Creating key system hierarchies
(utlizing the system types)4. Key cuttng (hands on, time permiting) 5. Calculating pin segments for the core 6. Pinning the core (hand on, time permiting) 7. Troubleshooting keys and cores 8. Proper way to drill out a core if required 9. Keystone Web (time permiting)
6 BEST Master Key Training Class
DATE: Thursday, April 19, 2018TIME: 2:00 p.m. - 5:00 p.m.PRESENTER: Dan Stephens
COST: See Page 8CLASS SIZE: Maximum 20LOCATION: Wyandotte Room
IDN-KANSAS CITY TRADE SHOW
LOCATIONHoliday Inn & Suites
8787 Reeder Rd.Overland Park, KS 66214
SHOW DATEAPRIL 19, 2018
11:00 a.m. - 2:00 p.m. Lunch Provided
12:00 p.m. - 1:00 p.m.
Holiday Inn & Suites 8787 Reeder Rd. Overland Park, KS 66214
N
S
EW
MAP
IDN-H. Hoffman 11648 W. 90th St. Overland Park, KS 66214
PAGE#
7
REGISTRATIONIDN-KANSAS CITY
LOCATIONHoliday Inn & Suites
8787 Reeder Rd.Overland Park, KS 66214
SHOW DATEAPRIL 19, 2018
11:00 a.m. - 2:00 p.m. Lunch Provided
12:00 p.m. - 1:00 p.m.
PAGE#
8
Company Name: Acct. #:
Address:
City: State: Zip:
Telephone: ( ) Fax: ( )
Email Address (Reminder Will Be Sent):
REGISTRATION DEADLINE: APRIL 11 2018
Class Number (Place Check Mark in Box For All You Wish to Attend)
First/Last Name Of Attendee (If only attending the Trade Show, Complete This Section & Check Trade Show Box At Right)
AttendingTrade Show?
1.
2.
3.
4.
Class RegistRation, CheCk one Box
Registration for classes will be complete ONLY when
payment is received.
Payment fees for classes cannot be billed on your IDN-H. Hoffman account. The class registration
fee is non-refundable.
*Pay one low price for your shop and send as many of your
employees to as many classes as you want.
$3500 RegistRation PRiCe SINGLE PERSON, UNLImItEd CLaSSES
registration and payment must be received before 4.11.18
$6500 RegistRation PRiCe SHOP RatE, UNLImItEd CLaSSES* registration and payment must be
received before 4.11.18
1/BA
SIC
LOW
VOL
TAGE
CLASS
4.1
8.18
yes no
yes no
yes no
yes no
TO REGISTER:1. For the Trade Show:
complete this form and FAX: (913) 599-4111 or EMAIL: [email protected] [email protected]
2. For attendance at Classes: Mail this form with payment to: IDN-H. Hoffman Att.: Marketing Dept. 7330 W. Montrose Ave Chicago, IL 60706QUestions: Shane Harmon at (913) 599-4111 or [email protected] or Scott Guetschow at (314) 614.5019 or [email protected]
2/ADV
ANCED
ELEC
-
TRON
IC C
LASS
4.1
8.18
3/HP
C M
ASTER
KEY
CLASS
4.1
8.18
4/EL
ECTR
IC S
TRIK
E
CLASS
4.1
9.18
5/PR
ODUC
T LIN
E
PRES
ENTA
TION
4.1
9.18
6/BE
ST M
ASTER
KEY
CLASS
4.1
9.18