LumiBrightTM UV 2400B-405 - Innovations In Optic · The 2400B-405 can easily couple to liquid light...
5
solutions in light LumiBright TM UV 2400B-405 LumiBright Ultraviolet Light Engines provide extreme brightness and a highly uniform light distribution. Chip-on-Board LED technology with metallic PCB substrates offers excellent thermal performance. The specialized glass primary optic is ideal for high power UV light. It is a non-imaging concentrator that delivers high collection efficiency and a homogeneous beam requiring no additional optics. The Model LE 2400B-405 produces a 41-degree half angle beam from a 7.5-mm diameter aperture with options for 14 LED die in single or multi-wavelength configurations. An on-board thermistor (included) allows real-time monitoring of temperature for closed-loop control. 10-K Gill Street, Woburn, MA 01801 p: (781) 933-4477 f: (781) 933-0007 Copyright © 2020 Innovations in Optics. All rights reserved. DS-UV2400B-405-200630 1 www.innovationsinoptics.com [email protected] Typical Applications: Ultraviolet: • UV curing • High speed printing • Document verification • Water and air purification • Medical phototherapy • Fluorescence excitation • Machine vision Table of Contents Product Specifications.......................................2 Notes.........................................................................2 Charts........................................................................3 Installation Control Drawing...........................4 Ordering Information.........................................4 Accessories.............................................................5 Benefits: • Uniform near and far fields • Fused silica optics for UV, high power, and high temperature operations • Continuous high current or pulsed operation • RoHS compliant - Environmentally friendly Ultraviolet: • l p 365 nm thru 405 Features: • 41 degree half angle far field • 7.5 mm output diameter • High thermal conductivity metal core PCB • COB array technology, 14 Die • Patent-pending non-imaging optics Options: • Single or or multi-wavelength configurations • Heat sink and thermal pads • Drivers and Controllers
Transcript of LumiBrightTM UV 2400B-405 - Innovations In Optic · The 2400B-405 can easily couple to liquid light...
s o lu t i o n s i n l i g h t
LumiBrightTM UV 2400B-405LumiBright Ultraviolet Light Engines provide extreme brightness and a highly
uniform light distribution. Chip-on-Board LED technology with metallic PCB
substrates offers excellent thermal performance. The specialized glass primary
optic is ideal for high power UV light. It is a non-imaging concentrator that delivers
high collection efficiency and a homogeneous beam requiring no additional optics.
The Model LE 2400B-405 produces a 41-degree half angle beam from a 7.5-mm diameter aperture with options
for 14 LED die in single or multi-wavelength configurations. An on-board thermistor (included) allows
real-time monitoring of temperature for closed-loop control.
10-K Gill Street, Woburn, MA 01801
p: (781) 933-4477 f: (781) 933-0007
Copyright © 2020 Innovations in Optics. All rights reserved.
DS-UV2400B-405-200630
1
www.innovationsinoptics.com
Typical Applications:
Ultraviolet:
• UV curing
• High speed printing
• Document verification
• Water and air purification
• Medical phototherapy
• Fluorescence excitation
• Machine vision
Table of Contents
Product Specifications.......................................2
Notes.........................................................................2
Charts........................................................................3
Installation Control Drawing...........................4
Ordering Information.........................................4
Accessories.............................................................5
Benefits:
• Uniform near and far fields
• Fused silica optics for UV, high power, and high
temperature operations
• Continuous high current or pulsed operation
• RoHS compliant - Environmentally friendly
Ultraviolet:
• lp
365 nm thru 405
Features:
• 41 degree half angle far field
• 7.5 mm output diameter
• High thermal conductivity metal core PCB
• COB array technology, 14 Die
• Patent-pending non-imaging optics
Options:
• Single or or multi-wavelength configurations
• Heat sink and thermal pads
• Drivers and Controllers
lu m i b r i g h t u v 2 4 0 0 b - 4 0 5
10-K Gill Street, Woburn, MA 01801
p: (781) 933-4477 f: (781) 933-0007
Copyright © 2020 Innovations in Optics. All rights reserved.
DS-UV2400B-405-200630
2
www.innovationsinoptics.com
Notes on Lightguide CouplingThe 2400B-405 can easily couple to liquid light guides and fiber bundles. The aperture and half-angle of the 2400B-405 matched the diameter and numerical aperture of typical light guides. The light guide ferrule canbe butt-coupled to the solid-glass aperture of the 2400B-405. No additional optics are necessary.
The maximum coupling efficiency for the Model 2400B-405 requires the use of a fiberoptic or liquid lightguide with equivalent specifications for both the nominal values of Numerical Aperture (NA
0) and Clear Aperture (CA
0).
When the lightguide design parameters of NAf or CA
f are smaller than the nominal values of the Model 2400B-405,
the coupling efficiency is reduced by the square of the ratios, (NAf/NA
0)2 and/or (CA
f/CA
0)2. Other factors that
contribute to coupling efficiency are the reflectance loss at the face of the fiberoptic or lightguide, as well asthe packing fraction when using a fiber bundle.
Notes on Thermal ManagementThe 2400B-405 uses a metal core circuit board for high thermal conductivity that allows heat to dissipate in all directions. An external heat sink or heat pipe is required to dissipate the heat generated at full drive power. Adding the feature of forced air convection across the heat sink or heat pipe fins removes heat faster and more efficiently. The 2400B-405 circuit board features an attached thermal pad for heat sink contact, no thermal grease is needed. Every 2400B-405 circuit board has a built-in thermistor for temperature moni-toring. Lifetime of the LEDs will be compromised if the temperature of the circuit board exceeds 70° C.
n o t e s
Parameter Specification Comment
Number of LED die 14 Connected in parallel, chip-on-board
Drive current 30A Maximum Continuous operation
*Forward voltageTurn on: 3.0VLimit: 5.6V
Requires constant current operation
UV optical power > 30 Watts At max current
UV optical power density > 70 W/cm2 At exit aperture, max current
Clear aperture (CA0) 7.5 mm At exit aperture
Far field angle 41° -
Numerical aperture (NA0) 0.66 -
Electrical connector 1 row, 8 pin Surface mount, high current
Overall size (mm) 30 x 36 x 16.7 W x L x H
PCB Thermal impedance 0.45° C/W -
Thermistor B25/85
3574 to 3646 For 10 kΩ
Thermistor impedence 10 kΩ At 25° C
Operating temperature 15° C to 45° C <85% RH, non-condensing
Lifetime (hours) - Depending on drive conditions and temperature
*Note: Drive circuits must prevent exceeding the maximum recommended open circuit voltage for any LED die.
s p e c i f i c a t i o n s
lu m i b r i g h t u v 2 4 0 0 b - 4 0 5c h a r t s
10-K Gill Street, Woburn, MA 01801
p: (781) 933-4477 f: (781) 933-0007
Copyright © 2020 Innovations in Optics. All rights reserved.
DS-UV2400B-405-200630
3
www.innovationsinoptics.com
Figure 1
0
5
10
15
20
25
30
35
0 5 10 15 20 25 30
Opt
ical
Pow
er [W
]
Drive Current (A)
Optical Power vs. Drive Current
Bin B1400-405 nm
Bin A4365-370 nm
Figure 2
0
10
20
30
40
50
60
70
80
0 5 10 15 20 25 30
Opt
ical
Pow
er D
ensi
ty [W
/cm
2 ]
Drive Current (A)
Optical Power Density vs. Drive Current at 7.5 mm Diameter Exit Aperture
Bin B1400-405 nm
Bin A4365-370 nm
Figure 3
3.0
3.2
3.4
3.6
3.8
4.0
4.2
4.4
4.6
4.8
5.0
0 5 10 15 20 25 30
Forw
ard
Volta
ge [V
]
Drive Current (A)
Forward Voltage vs. Drive Current
Figure 5
0.0
0.2
0.4
0.6
0.8
1.0
350 360 370 380 390 400 410 420 430 440 450
Rela
tive
Spec
tral
Pow
er D
ensi
ty
Wavelength (nm)
UV Die Bins: Spectral Power Distribution (at equal current density)
365 nmIntegratedPower = 71.9 %
385 nmIntegratedPower = 100 %
395 nmIntegratedPower = 99.0 %
405 nmIntegratedPower = 87.2 %
Figure 6
Temperature Versus Thermistor Impedance
0
10
20
30
40
50
60
70
80
90
100
0 2 4 6 8 10 12 14 16
Impedance [kOhms]
Tem
pera
ture
[Cel
sius
]
Figure 4
0
20
40
60
80
100
120
140
160
0 5 10 15 20 25 30
Elec
tric
al D
rive
Pow
er [W
]
Drive Current (A)
Drive Power vs. Drive Current
lu m i b r i g h t u v 2 4 0 0 b - 4 0 5
10-K Gill Street, Woburn, MA 01801
p: (781) 933-4477 f: (781) 933-0007
Copyright © 2020 Innovations in Optics. All rights reserved.
DS-UV2400B-405-200630
4
www.innovationsinoptics.com
30.0
3.0±0.4
24.5±0.4
36.0
2.51 0.00+0.08
4X 3.30 0.00+0.08 2X 1.00 2X 22.00
2X 15.00
7.5
24.000
2X 7.50
POSN 1
16.7
7.2
2.2
2X R 3.250
2.51 0.00+0.08
DETAIL ASCALE 4 : 1
INSTALLATION CONTROL DRAWING
NOTES:
1. CONTENT FOR REFERENCE ONLY AND SUBJECT TO CHANGE
2A
REVISIONSREV ECN NO DESCRIPTION DATE ECO
1 N/A PRERELEASE 11/21/2016 BG2 E-00245 A) DELETE INTERCONNECT TABLE 2/13/2019 SFS
DATE
TITLE
SIZEB
SCALE: SHEET 1 of 1
REVDWG. NO.FINISH:2
DRW
ENG
ENG APVD
MATERIAL:
UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN MILLIMETERS
TOLERANCES:1 PLACE DECIMAL: 0.32 PLACE DECIMALS: 0.203 PLACE DECIMALS: 0.100ANGLE: -----
BG 11/21/2016
2:1
THIS DRAWING AND SPECIFICATIONSHEREIN ARE THE PROPERTY OF INNOVATIONS IN OPTICS, INC. AND SHALLNOT BE REPRODUCED NOR COPIEDNOR USED IN WHOLE OR IN PART ASTHE BASIS FOR THE MANUFACTUREOR SALE OF ITEMS WITHOUT THE EXPRESS WRITTEN PERMISSION OFINNOVATIONS IN OPTICS, INC.
TEL: (781) 933-4477 FAX: (781) 933-0007
INNOVATIONS IN OPTICS, INC.82 Cummings Park
Woburn, MA 01801 BG
TB
DATE
DATE
LUMIBRIGHT ASSY, 40 DEG, 7.8MM (SILICA)
2400B-405-ICD
11/21/2016
11/21/2016
Plot
Dat
e: W
edne
sday
, Feb
ruar
y 13
, 201
9 L
ast S
aved
Wed
nesd
ay, F
ebru
ary
13, 2
019
3:59
:04
PM b
y: sh
awns
i n s t a l l a t i o n c o n t r o l d r a w i n g
Nominal Wavelength Part Number Notes
365nm 2400B-405-003
Wavelength bins are +/- 5nm from nominal
385nm 2400B-405-004
395nm 2400B-405-007
405nm 2400B-405-005
o r d e r i n g i n f o r m a t i o n
lu m i b r i g h t u v 2 4 0 0 b - 4 0 5
10-K Gill Street, Woburn, MA 01801
p: (781) 933-4477 f: (781) 933-0007
Copyright © 2020 Innovations in Optics. All rights reserved.
DS-UV2400B-405-200630
5
www.innovationsinoptics.com
Cooling Fans Thermal Pads Heat Sinks
LumiBright DR Driver/ Controller Heat Pipes Wire Harness Assemblies
a c c e s s o r i e s
The products, their specifications and other information appearing in this document are subject to change by Innovations in Optics, Inc. (IOI) without notice. IOI assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information
contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any
particular application or as any other form of warranty. IOI product warranties are limited to only such warranties as accompany a purchase contract or
purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication
may be considered as a waiver by IOI of any intellectual property rights that IOI may have in such information. LumiBright™ is a trademark of IOI, all rights reserved. This product is protected by U.S. Patents and Patents Pending in the U.S. and other countries.
