LUG-ALL® - THE BEST PERFORMING PORTABLE WINCH-HOIST
2
GATE TYPE HOOK Hook latch revolves on hook shank and locks under spring tension in open or closed position. JAWS WITH SCREW PINS Jaw fitting provides absolute attachment, high strength forged steel jaws and screw pins. HOT STICK RING HOOK LATCH Hot stick hook latch models have rings on the hook and latch for use on energized lines. Using holding sticks, the latch and hook can be easily maneuvered. HOT STICK HOOK Hot stick hooks have a welded 1" diameter ring and standard latches for use with approved hot stick tools where remote rigging is required. Hot stick hooks, operating levers and fiberglass handles all have operat- ing rings and are supplied on hot stick hoist models. THE RIGHT HOOK FOR ANY APPLICATION For inquiries, call us at: 1-877-658-4255 TOLL-FREE U MODELS STANDARD PS MODELS HB MODELS B MODELS STANDARD LATCHING HOOK Heat treated, forged steel hooks for lasting strength and durability. Latches are standard. Strap Warning: LUG-ALL web strap hoists are NOT insulating live line tools. When the strap is clean and dry, it may have dielectric properties typical of nylon or polyester fibers. The strap and composite handle are intended to pro- vide an extra measure of safety when working around energized lines. Use an appropriate insulating link stick in series with the web strap and when necessary in series with the body to achieve proper working distance per OSHA table or company work practices. When the handle swings closer to an energized conductor than OSHA working distances or company work practices permit, use rubber gloves rated for appropriate voltage. LUG-ALL ® - THE BEST PERFORMING PORTABLE WINCH-HOIST… ANYWHERE! LUG-ALL web strap winch hoists make it easier to work with energized lines. These light- weight hoists have one-hand portability and are easy to use in most positions. The easily replaceable stress link is an excellent overload warning. Winch-hoists with hot stick rings eliminate direct contact with hoists. Six 1" diameter rings on the hooks, handle and pawl shafts allow the lineman to position the hoist using approved hot sticks. CORPORATION Morgantown Business Park 604 Hemlock Road Morgantown, PA 19543 Tel: 610-286-9884 Fax: 610-286-9661 www.lug-all.com [email protected] ©2003, Lug-All® All rights reserved. HOOK UP WITH LUG-ALL. QUALITY • DURABILITY • RELIABILITY Made in U.S.A. WEB STRAP WINCH-HOISTS INNOVATIVE DESIGN • Aluminum alloy frame . • Exclusive drum anchor - swaged ball shank terminal locks cable securely in drum and allows for full extension of cable. (Other brands use two set screws and 2-3 wraps of cable to hold cable to drum.) • Cable end has hydraulically crimped copper sleeve. • Proprietary reversible handle - always a downward pull , switches positions in seconds. • Self-storing aircraft cable . No chains are hanging in the way or dragging on the ground. Much lighter than chain pullers. • Optional marine grade models - developed specifically for marine or other corrosive conditions, have anodized castings, stainless steel cables,and cadmium plated steel. • Drop forged steel hooks . LUG-ALL CABLE WINCH-HOISTS RELIABLE OPERATION • Factory tested to 125% of rated capacity. • At average of 20% to 50% over- load, handles bend to alert operator to stop immediately. • Reversible handle is designed to bend on severe overload to protect the user and the hoist. Replace the handle not the winch-hoist. Call to order replacement handle. • 6000 Model - the shear pin design on two- position telescoping handle warns of overload. • Quick Release - will not function when the cable is under load. • The handle can be removed to prevent tampering with the hoist or load. • One year guarantee against defects in workmanship and/or materials. Ask for the LUG-ALL ® Cable Hoist Brochure. Highest quality is designed from the beginning… industrial-quality products for all applications. EXCLUSIVE STRESS LINK OVERLOAD WARNING To avoid Personal Injury or Equipment Damage: • Do not exceed load rating. • BEFORE USING HOISTS, inspect handle assembly for broken or missing stress links and REPLACE IMMEDIATELY!! • Operate only when hook-to-hook pull is in a straight line. • Do not use if web strap is twisted, kinked, frayed, or damaged. • Do not operate if hoist is damaged or malfunctioning. • Do not use to lift people, or loads over people. • Do not operate the hoist with a lever extension. • Do not remove or obscure warning labels. • Do not use hoist as a load binder. • Do not snag or pull the strap over edges, as serious weakening may result. • Do not use LUG-ALL as a tow line. • Close latches on hook before using. • Read and follow all instructions. • Use only LUG-ALL replacement parts.
Transcript of LUG-ALL® - THE BEST PERFORMING PORTABLE WINCH-HOIST
GATE TYPE HOOKHook latch revolves on hook shank and locks underspring tension in open or closed position.
JAWS WITH SCREW PINSJaw fitting provides absolute attachment, high strengthforged steel jaws and screw pins.
HOT STICK RING HOOK LATCHHot stick hook latch models have rings on the hookand latch for use on energized lines. Using holdingsticks, the latch and hook can be easily maneuvered.
HOT STICK HOOKHot stick hooks have a welded 1" diameter ring andstandard latches for use with approved hot stick toolswhere remote rigging is required. Hot stick hooks,operating levers and fiberglass handles all have operat-ing rings and are supplied on hot stick hoist models.
THE RIGHT HOOK FOR ANY APPLICATION
For inquiries, call us at:1-877-658-4255
TOLL-FREE
U MODELS
STANDARD
PS MODELS
HB MODELS
B MODELS
STANDARD LATCHING HOOKHeat treated, forged steel hooks for lasting strengthand durability. Latches are standard.
Strap Warning:
LUG-ALL web strap hoists are NOT insulating live line tools. When the strap is clean and dry, it may havedielectric properties typical of nylon or polyester fibers. The strap and composite handle are intended to pro-vide an extra measure of safety when working around energized lines.
Use an appropriate insulating link stick in series with the web strap and when necessary in series with thebody to achieve proper working distance per OSHA table or company work practices. When the handleswings closer to an energized conductor than OSHA working distances or company work practices permit,use rubber gloves rated for appropriate voltage.
LUG-ALL® - THE BEST PERFORMING PORTABLE WINCH-HOIST… ANYWHERE!LUG-ALL web strap winch hoists make it easier to work with energized lines. These light-weight hoists have one-hand portability and are easy to use in most positions. The easily replaceable stress link is an excellent overload warning.
Winch-hoists with hot stick rings eliminate direct contact with hoists. Six 1" diameter rings on thehooks, handle and pawl shafts allow the lineman to position the hoist using approved hot sticks.
CORPORATIONMorgantown Business Park604 Hemlock RoadMorgantown, PA 19543Tel: 610-286-9884Fax: [email protected]
©2003, Lug-All® All rights reserved.
HOOK UP WITH LUG-ALL.QUALITY • DURABILITY • RELIABILITY
Made in U.S.A.
WEB STRAP WINCH-HOISTS
INNOVATIVE DESIGN
• Aluminum alloy frame.
• Exclusive drum anchor - swaged ball shank terminal locks cable securely in drum and allows for full extension of cable. (Other
brands use two set screws and 2-3 wraps of cable to hold cable to drum.)
• Cable end has hydraulically crimped copper sleeve.
• Proprietary reversible handle - always a
downward pull,switches positionsin seconds.
• Self-storing aircraft cable. No chains are hanging in the way or dragging on the ground. Much lighter than chain pullers.
• Optional marine grade models - developedspecifically for marine or other corrosive conditions,have anodized castings, stainless steel cables,and cadmium plated steel.
• Drop forged steel hooks.
LUG-ALL CABLE WINCH-HOISTS
RELIABLE OPERATION
• Factory tested to 125% of rated capacity.
• At average of 20%to 50% over-load, handlesbend to alertoperator to stopimmediately.
• Reversible handle is designed to bend on severeoverload to protect the user and the hoist. Replacethe handle not the winch-hoist. Call to order replacement handle.
• 6000 Model - the shear pin design on two- position telescoping handle warns of overload.
• Quick Release - will not function when the cable is under load.
• The handle can be removed to prevent tamperingwith the hoist or load.
• One year guarantee against defects in workmanshipand/or materials.
Ask for the LUG-ALL®
Cable Hoist Brochure.
Highest quality is designed from the beginning… industrial-quality products for all applications.
EXCLUSIVESTRESS LINKOVERLOADWARNING
To avoid Personal Injury or Equipment Damage:• Do not exceed load rating.• BEFORE USING HOISTS, inspect handle assembly for broken or
missing stress links and REPLACE IMMEDIATELY!!• Operate only when hook-to-hook pull is in a straight line.• Do not use if web strap is twisted, kinked, frayed, or damaged.• Do not operate if hoist is damaged or malfunctioning.• Do not use to lift people, or loads over people.• Do not operate the hoist with a lever extension.• Do not remove or obscure warning labels.• Do not use hoist as a load binder.• Do not snag or pull the strap over edges, as serious weakening may
result.• Do not use LUG-ALL as a tow line.• Close latches on hook before using.• Read and follow all instructions.• Use only LUG-ALL replacement parts.
Self-lubricatingbearings
Web strap
Pulley blockdouble reeved
for full capacity
Forged steel latching hooks
Easily replaceablestress link gives
warning of overload
Aluminum alloy frame
Open constructionfor daily visual
inspection
Web strap stores ondouble flanged drum
L U G - A L L W E B S T R A P H O I S T S
Reversiblefiberglass
handle
Hot stick ring(optional)
Hot stickoperating
levers(optional)
Wind upwheel
Hot stickhook latch(optional)
Designed for overhead maintenance and construction of energized lines.
ENGINEERED FOR RELIABLE OPERATION
• All webstrap models meet ANSIB30.21 and have been tested
to 125% of rated load.
• Exclusive breakable stress link - signals the operator of an overload condition by breaking before the fiberglass handle
breaks and/or load-carrying part of the hoist isoverloaded.
• Double flanged drum - prevents web strap from coming in contact with ratchet teeth.
• Forged Hooks - with latches.
POSITIVE LOAD HOLDING IN ALL ENVIRONMENTS
• Double interlocking pawl mechanism - No load brakes to slip
or foul.
EASE OF OPERATION
• Self-lubricating bearings - throughout housing and on the pulley assure smooth operation.
• Open frame construction - for cleaning and visual inspection.
USEFUL COST-EFFECTIVE OPTIONS
• Five hook styles - designed to meet your application requirements and work practice standards.
• Models equipped with hot stick levers, rings, and hot stick latches - for remote operation using approved hot line tools.
1 and 1 1/2 TON CAPACITY SMALL FRAMEshown with optional hot stick ringsand hot stick hook latches
• Hot stick rings available
• Choice of hook styles
L U G - A L L W E B S T R A P M O D E L S P E C I F I C A T I O N S
Interlockingpawl system
MODEL NUMBERSINGLE LINE
CAPACITYLB/METRIC✝
DOUBLE LINE CAPACITY
LB/METRIC✝
HANDLELENGTH WEIGHT
2 TON CAPACITY4A LATCHING HOOKS4B HOT STICK RINGS & LATCHING HOOKS4U GATE TYPE HOOKS 4UB GATE TYPE HOOKS & HOT STICK RINGS4HB HOT STICK RINGS & HOOK LATCHES4PS CLEVIS JAWS & SCREW PINS
2000/9002000/9002000/9002000/9002000/9002000/900
4000/18184000/18184000/18184000/18184000/18184000/1818
36''36''36''36''36''36''
14.75 lb.14.75 lb.16.50 lb.16.50 lb.14.75 lb.14.75 lb.
SINGLE LINEHOOK TO HOOK
DISTANCEMIN. MAX.2'-4'' 10'-10'2'-4'' 10'-10''2'-4'' 10'-10''2'-4'' 10'-10''2'-4'' 10'-10''2'-4'' 10'-10'''
DOUBLE LINEHOOK TO HOOK
DISTANCEMIN. MAX.2'-8'' 6'-6''2'-8'' 6'-6''2'-8'' 6'-6''2'-8'' 6'-6''2'-8'' 6'-6''2'-8'' 6'-6''
TOTAL MAXIMUMPULLING DISTANCE
SINGLE DOUBLE8'-6'' 3'-10''8'-6'' 3'-10''8'-6'' 3'-10''8'-6'' 3'-10''8'-6'' 3'-10''8'-6'' 3'-10''
MODEL NUMBERHANDLELENGTH
WEIGHT
1 TON CAPACITY2A LATCHING HOOKS2B HOT STICK RINGS & LATCHING HOOKS2U GATE TYPE HOOKS2UB GATE TYPE HOOKS and HOT STICK RINGS2HB HOT STICK RINGS & HOOK LATCHES
1 1/2 TON CAPACITY - SMALL FRAME2010920111 LATCHING HOOKS2010920109 HOT STICK RINGS & LATCHING HOOKS2010930118 GATE TYPE HOOKS2010930120 GATE TYPE HOOKS & HOT STICK RINGS2010930137 HOT STICK RINGS & HOOK LATCHES
1000/4551000/4551000/4551000/4551000/455
1500/6821500/6821500/6821500/6821500/682
2000/9092000/9092000/9092000/9092000/909
3000/13633000/13633000/13633000/13633000/1363
30''30''30''30''30''
10.25 lb.10.75 lb. 12.5 lb. 13 lb.11.25 lb.
20''20''20''20''20''
10.25 lb.10.25 lb. 12 lb. 12 lb.10.25 lb.
SINGLE LINECAPACITY
LB/METRIC✝
DOUBLE LINE CAPACITY
LB/METRIC✝
SINGLE LINEHOOK TO HOOK
DISTANCEMIN. MAX.
MIN. MAX.
DOUBLE LINEHOOK TO HOOK
DISTANCEMIN. MAX.
MIN. MAX.
TOTAL MAXIMUMPULLING DISTANCE
SINGLE DOUBLE
SINGLE DOUBLE
1'-8'' 10'-9''1'-8'' 10'-9''1'-8'' 10'-9''1'-8'' 10'-9''1'-8'' 10'-9''
1'-11'' 9'-1''1'-11'' 9'-1''1'-11'' 9'-1''1'-11'' 9'-1''1'-11'' 9'-1''
2'-1'' 5'-4''2'-1'' 5'-4''2'-1'' 5'-4''2'-1'' 5'-4''2'-1'' 5'-4''
7'-2'' 3'-3'' 7'-2'' 3'-3''7'-2'' 3'-3''7'-2'' 3'-3''7'-2'' 3'-3''
2'-3'' 6'-2''2'-3'' 6'-2''2'-3'' 6'-2''2'-3'' 6'-2''2'-3'' 6'-2''
9'-1'' 3'-11''9'-1'' 3'-11''9'-1'' 3'-11''9'-1'' 3'-11''9'-1'' 3'-11''
Specifications are subject to change without notice.
2 TON CAPACITYMEDIUM FRAMEshown with optional gate type hooks• Hot stick rings available
• Choice of hook styles
1 1/2 TON CAPACITY MEDIUM FRAMEshown with standard latching hooks
• Hot stick rings available
• Choice of hook styles
Ratchet action
MODEL NUMBER
1 1/2 TON CAPACITY - MEDIUM FRAME3A LATCHING HOOKS3B HOT STICK RINGS & LATCHING HOOKS3U GATE TYPE HOOKS3UB GATE TYPE HOOKS & HOT STICK RINGS3HB HOT STICK RINGS & HOOK LATCHES3PS CLEVIS JAWS & SCREW PINS
1500/6821500/6821500/6821500/6821500/6821500/682
3000/13633000/13633000/13633000/13633000/13633000/1363
30''30''30''30''30''30''
13 lb. 13 lb.14.75 lb.14.75 lb. 13 lb.13.50 lb.
HANDLELENGTH WEIGHT
SINGLE LINECAPACITY
LB/METRIC✝
DOUBLE LINE CAPACITY
LB/METRIC✝
SINGLE LINEHOOK TO HOOK
DISTANCEMIN. MAX.
DOUBLE LINEHOOK TO HOOK
DISTANCETOTAL MAXIMUM
PULLING DISTANCE
SINGLE DOUBLE2'-1'' 12'-9''2'-1'' 12'-9''2'-1'' 12'-9''2'-1'' 12'-9''2'-1'' 12'-9''2'-1'' 12'-9''
2'-6'' 7'-5''2'-6'' 7'-5''2'-6'' 7'-5''2'-6'' 7'-5''2'-6'' 7'-5''2'-6'' 7'-5''
10'-8'' 4'-11''10'-8'' 4'-11''10'-8'' 4'-11''10'-8'' 4'-11''10'-8'' 4'-11''10'-8'' 4'-11''
MIN. MAX.
TOTAL HOOK TO HOOK DISTANCE
TOTAL HOOK TO HOOK DISTANCE
TOTAL HOOK TO HOOK DISTANCE
TOTAL MAXIMUM PULLING DISTANCE
TOTAL MAXIMUM PULLING DISTANCE
TOTAL MAXIMUM PULLING DISTANCEThe Stress Link, next to theOverload Link, snaps when the
hoist is seriously overloaded,warning the operator to backoff the load before injury ordamage.
Replace broken Stress Link IMMEDIATELY!!
The Overload Link haselongated holes which
allows enough movementfor the Stress Link to snap,
while holding the handle sock-et assembly together.
BROKEN STRESS LINK
OVERLOAD LINK
✝ Metric capacities shown are exact equivalents of U.S Domestic Ratings.
✝ Metric capacities shown are exact equivalents of U.S Domestic Ratings.
✝ Metric capacities shown are exact equivalents of U.S Domestic Ratings.
Easily replaceablestress link
gives warning of overload
![PEERLESS ELECTRIC CHAIN HOIST ~mrnJ~ · PEERLESS ELECTRIC CHAIN HOIST [ITffi]]~ ~ 14 *Rated current @ 230V is 2 times table value... Available in special lug mount only. "*8 ton and](https://static.fdocuments.us/doc/165x107/5e353e373f76ef01b201d455/peerless-electric-chain-hoist-mrnj-peerless-electric-chain-hoist-itffi-14.jpg)
