Lubncation%20catalogue

lubricationequipment

CC

-03B

powder coatingrobotically armed &conveyorised

multi spindle automatshigh volumeproductionof precisionturned parts

total quality& control5,00,000 sq. ft. plant2,000 dedicated people

Groz has always exceeded the expectations of tool manufacturers and usersworld over. Groz carefully makes each tool under stringent quality controlproceesses that are achieved in a hi-tech manufacturing environment

cncadvanced cnc

turning & verticalmachine centers

pressure die casting

plc controlledsemi-automatic

equipment

QualityAssurance Statement

The satisfaction of all customers is thefundamental principle of the GROZcorporate philosophy.

GROZ stands committed to the quality of its products and service with the assurance of complete back-up support.

With a wide range of products, promptservice and vast experience, GROZremains dedicated to the customer.

ISO/ TS 16949

what’s new!

GREASINGequipment

11

13

14

16

26

29

34

35

42

42

47

50

56

60

‘V’ SeriesLever Grease Gun

‘V’ SeriesPistol Grease Gun

ButtonHeadCouplers

Heavy DutyGrease GunHolder

Flexible / RigidGrease GunExtension

Grease Cartridge

Grease FittingThread Tester

Grease FittingCaps

Quick ConnectGrease Hose& Needle

Portable GreaseRatio Pumpswith Bucket

BucketGreasers

High PressureGrease Pumpswith Bucket

‘Vario’ PremiumPistol GripGrease Gun

‘Ultimate’ WeatherPistol GripGrease Gun

1

Dear Valued Customer,

It is my pleasure to present to you our latest Lubrication Equipment Catalogue.

While enhancing our range in the traditional Greasing & Oiling equipment, we are now also diversifying into a wide range of highly efficient Fuel Handling Equipment & Air Treatment Units. You will see many new technologically superior products as well as modifications to some of the old designs, in the following pages.

Further, I assure you of the same top performance to which you are accustomed to from Groz.

We appreciate your business and value your trust and loyalty.

Warm Regards,

ANIL BAMMI Managing Director

OILING FUEL SPECIALITYequipment equipment pumps

AIR LINEaccessories

DRUM HANDLINGequipment

67 92

96

100

101

114

116

104

107

110

111

123

124

70

71

79

80

81

90

Quart / LitreStrokePump

IndustrialRotaryFuel Pumps

Heavy DutyElectricFuel Pumps

In-LineFuelMeter

FuelFlowMeter

Air Control Units

AirBlow Guns

Diaphragm/BilgePumps

PlasticLever Pump

SiphonPumps

BrassTransfer Pumps

AdjustableDrumTrolley

DrumFaucet/Tap

Oil LubeDispenserwith Bucket

SpringLoadedPumps

ElectricOilPump

Oil ControlGun

Oil Control Gunwith MechanicalMeter

Spill ProofPlasticFunnels

2 3 4

5 6

Lever Grease Guns / 06

Pistol Grip Grease Guns / 12

Mini Pistol Grease Guns / 17

Push Type Grease Guns / 18

Air Operated Grease Guns / 19

Hydraulic Couplers / 22

Grease Hoses / 30

Grease Cartridge / 35

Other Greasing Accessories / 36

Grease Fittings / 38

Grease Fitting Tools / 43

Quick Link Accessories / 46

Air Operated Grease Ratio Pumps / 49

Grease Control Valves & Accessories / 52

Manual Grease Pumps / 55

Pump Accessories / 61

what’s inside

equipmentGREASING1

what’s where

GREASING EQUIPMENT

OILING EQUIPMENT FUEL EQUIPMENT

SPECIALITY PUMPS

AIR LINE ACCESSORIES

DRUM HANDLING

Grease Guns

Oil Pumps & Accessories Fuel Pumps & Accessories

Special Application Pumps

Air Line Accessories

Drum Handling

Grease Gun Accessories Grease Fittings & Accessories

Quick Link

Grease Pumps & Accessories

Lever Grease Guns - Heavy DutyLever Grease Gun - ProfessionalLever Grease Gun - Super ValueLever Grease Gun - Standard‘V’ Series Lever Grease GunPistol Grease Gun - Professional‘Vario’ Premium Pistol Grip Grease Gun‘Ultimate’ All Weather Pistol Grip Grease GunPistol Grease Guns‘V’ Series Pistol Grease GunsMini Pistol Grease Gun - DeluxeMini Pistol Grease Gun - PopularPush Type Grease GunsHigh Power Air Operated Grease GunAir Operated Grease Guns

060809101112131415161717181920

26272728282929303234343535363637

464848

495052535455565859606162

222324242525

64656566676869707172747475767879808182838485858688888990

384242434344

929495969899

100101102

114114115115116118118

120120121122123123124124

104105106106107108109110111112112

Lever Action Barrel PumpsLever Action Oil PumpVertical Lift PumpFront Action Barrel PumpQuart / Litre Stroke PumpRotary Barrel PumpsRotary Barrel Pumps - ProfessionalOil Lube DispensersSpring Loaded PumpsEzee Flo PumpsDrip PansBung NutsSuction TubesAir Operated Oil Ratio Pumps5:1 Composite Air Operated Oil PumpElectric Oil PumpOil Control GunOil Control Gun with Mechanical MeterOil Control Gun AccessoriesAir Operated Oil Pump AccessoriesOil SpigotsSuction GunsTransfer GunOil CansSpeciality Oil CansFlexible & Rigid SpoutsFlexible Spout MeasuresSpill Proof Plastic Funnels

Industrial Rotary Fuel PumpsRotary Booster Pump 3:1Double Diaphragm Fuel Transfer PumpHeavy Duty Electric Fuel PumpsFuel FilterFuel Control Nozzles - ManualIn-Line Fuel MeterFuel Flow MeterLever Action Bio-Diesel & E85 Fuel Pump

Diaphragm / Bilge PumpDiaphragm Pump - Food GradePolypropylene Chemical PumpNylon Chemical PumpPlastic Lever PumpRotary Chemical PumpPlastic Oil PumpSiphon PumpsBrass Transfer PumpsBrake Fluid Transfer PumpTire Sealant Pump

Air RegulatorAir LubricatorFilter Regulator CombinationFilter-Regulator & Lubricator - 2 pcAir Blow Guns / Safety Blow GunsAir Coupler & NippleAir Line Fittings

Drum WrenchDrum DollyBand DolliesDrum CradleLow Profile Drum TrolleyDrum Trolley - AdjustableDrum Faucet / TapDrum Bung Converter

Hydraulic Couplers - StandardHydraulic Couplers - ProfessionalHydraulic Couplers - Heavy DutyHydraulic Couplers Air-OHydraulic Couplers - 90°Hydraulic Couplers - 360°

Grease FittingsGrease Fitting Thread TesterGrease Fitting CapsEasy Out Tools“Drive Fit” Grease Fitting InstallerGrease Fitting Unblocker

Quick Connect AdaptorsQuick Disconnect AdaptorsEzee - Lube Kit

Composite Air Operated Grease Ratio Pumps 50:1Air Operated Grease Ratio Pumps 50:1Grease Control Valve - ProfessionalGrease Control Valves - BoosterHigh Pressure Grease SwivelsPortable Greasing SystemBucket GreasersGrease Filler Pump - ProfessionalGrease Filler PumpsHigh Pressure Grease PumpsFollower PlatesFemale Loader Adaptors

Button Head CouplersHydraulic Coupler - Pin TypeNeedle Nose DispensersGrease Injector NeedlesSeal Off DispensersGrease Gun HoldersHeavy Duty Grease Gun HolderFlexible Grease HosesGrease Hoses - Heavy DutyFlexible / Rigid Grease Gun ExtensionGrease Gun Extension SwivelGrease Gun Steel ExtensionsGrease CartridgeBulk Loaders / Filler NipplesAir Release ValvesDeluxe Steel Bearing Packers

Product Features

Ÿ Top of the line Grease gun designed for punishing day-in and day-out heavy industrial applications

Ÿ Develops 10,000 PSI / 690 BAR

Ÿ Variable stroke feature built in for use in confined areas

Ÿ High Tolerance Aluminum Die Cast Grease Gun Head

Ÿ Built tough: Robust barrel 0.049” (1.2 mm) thick, Heavy Duty Follower Spring, CNC machined grease gun head, large rolled threads for fast & easy re-loading

Ÿ Complete with a choice of 6" (150 mm) steel extension or 12" (300 mm) flexible hose & professional 4 jaw coupler with ball check

Lever Grease Guns - Heavy Duty01

G1-HD G4-HD G10-HD

ESP Bomba de engrase a palanca FR Pistolet graisseur robuste activé par levier DE Handhebelfettpressen

CC 06

grease guns

Variants

G4-HDFor use with 450 gms grease cartridge, popular in Australia& New Zealand

G10-HDHigh capacity Grease Gunfor use with 24 oz. (750 cc)bulk grease or with standard14 oz. (400 gm) grease cartridge

Heavy DutyGrease Gun Headincorporates abulk loader andan air bleedervalve

G1-HDFor use with 14 oz. (400 gms)grease cartridge or 500 cc bulkgrease

Ordering Information

1 gm / stroke (1 oz. / 28 strokes)

CAT. NR.

With Steel Extension & Coupler

G1R/HD/B

G1R/HD/M

G1R/HD/N

G4R/HD/B

G10R/HD/B

G10R/HD/M

G10R/HD/N

42700

42701

42702

42780

42750

42751

42752

42720

42721

42722

42785

42760

42761

42762

14 oz (400 gms)

14 oz (400 gms)

14 oz (400 gms)

450 gms

14 oz (400 gms)

14 oz (400 gms)

14 oz (400 gms)

500cm³

500cm³

500cm³

650cm³

750cm³

750cm³

750cm³

1/8” BSPT

M10 x 1

1/8” NPT

1/8” BSPT

1/8” BSPT

M10 x 1

1/8”NPT

G1F/HD/B

G1F/HD/M

G1F/HD/N

G4F/HD/B

G10F/HD/B

G10F/HD/M

G10F/HD/N

With Flexible Hose & Coupler

CAT. NR. CARTRIDGE

CAPACITY

BULK

CAPACITYTHREADS

ORDERING NR. ORDERING NR.

**

*

**

Key

Best Seller

CARTRIDGELOADING

NO FALSELUBRICATION

10,000 PSI690 BAR

FILLER PUMPLOADING

VARIABLESTROKE

SUCTIONFILL

CC 07

grease guns

AUTOMOTIVE

AGRICULTURE

INDUSTRIAL

CONSTRUCTION

Rugged and robustzinc plated leverhandle

Ergonomicallydesigned rubber grip

Unique LockLever mechanism

allows user toeasily lock plungerrod in any position

Non sliptextured

finish

Product Features

Ÿ Professional Grease gun, ideal for use in automotive applications


Ÿ Variable stroke feature built in for use in confined areas


Ÿ Capacity: 14 oz. (400 gms) grease cartridge or 500cc bulk fill


Soft rubber gripon lever handle forease of operation

Aluminum diecast grease gun

head incorporatesa bulk loader

Non slip texturedpowder coated

finish

Unique LockLever mechanism

allows user toeasily lock plungerrod in any position


CAT. NR.


G8R/B

G8R/M

G8R/N

42600

42601

42602

42620

42621

42622

1/8” BSPT

M10 x 1

1/8” NPT

G8F/B

G8F/M

G8F/N


CAT. NR.THREADS



Key

Best Seller

Lever Grease Gun - Professional02

G8

ESP Bomba de engrase a palanca FR Pistolet graisseur activé par levier DE Handhebelfettpressen

CARTRIDGELOADING

8,000 PSI550 BAR

FILLER PUMPLOADING

VARIABLESTROKE

SUCTIONFILL

NO FALSELUBRICATION

**

CC 08

grease guns

AUTOMOTIVE

03


Ÿ By far the most popular grease gun for general purpose lubrication in automotive, workshop, agricultural & light industrial applications

Ÿ Drop resistant steel head construction


Ÿ Air release either through loader fitting on the grease gun head or half turn of the head assembly

Ÿ Soft rubber grip on lever handle for comfortable operation

Ÿ Durable powder coated finish

Ÿ Complete with a choice of 6” (150 mm) steel extension or 12” (300 mm) flexible hose & standard 4 jaw coupler with ball check

G11

Lever Grease Gun - Super Value

G1 G4 G10

Product Features

G1For use with 14 oz. (400 gms) grease cartridge or 500-cc bulk

Variants

G4For use with 450 gms grease cartridge, popular in Australia & New Zealand

G10High capacity Grease Gun for use with 24 oz. (750 cc) bulk grease or with standard 14oz. (400 gm) grease cartridge

G11Extra Long & very High capacity Grease Gun for use with 1000 cc bulk grease, popular in Italy

CARTRIDGELOADING

6,000 PSI413 BAR

FILLER PUMPLOADING

SUCTIONFILL


CAT. NR.


G1R/B

G1R/M

G1R/N

G4R/B

G10R/B

G10R/M

G11R/B

G11R/M

42500

42501

42502

42580

42590

42591

42560

42561

42520

42521

42522

42585

42595

42596

42565

42566

14 oz. (400 gms)

14 oz. (400 gms)

14 oz. (400 gms)

450 gms

14 oz. (400 gms)

14 oz. (400 gms)

14 oz. (400 gms)

14 oz. (400 gms)

500cm³

500cm³

500cm³

650cm³

750cm³

750cm³

1000cm³

1000cm³

1/8” BSPT

M10 x 1

1/8” NPT

1/8” BSPT

1/8” BSPT

M10 x 1

1/8” BSPT

M10 x 1

G1F/B

G1F/M

G1F/N

G4F/B

G10F/B

G10F/M

G11F/B

G11F/M


CAT. NR. CARTRIDGE

CAPACITY

BULK

CAPACITYTHREADS



Key

Best Seller New

*

*

*

CC 09

grease guns

AUTOMOTIVE

AGRICULTURE MINING

04


Ÿ Hardworking entry level Grease Gun, designed for use in general lubrication and daily maintenance work

Ÿ Head incorporates single vent hole with block nut

Ÿ Develops 6000 PSI/ / 413 BAR

Ÿ Air release achieved through half turn of the head assembly

Ÿ Durable powder coated finish

Ÿ Capacity: 14 oz (400 gms) grease cartridge or 500 cc bulk fill

Ÿ Complete with a choice of 6” (150 mm) steel extension or 12” (300 mm) flexible hose & 4 jaw coupler with ball check

Lever Grease Gun - Standard

G1-STD G1-DC G23

Product Features

G1-STDFor use with 14 oz. (400 gms) grease cartridge or 500 cc bulk grease. Steel head

Variants

G1-DCFor use with 14 oz. (400 gms) grease cartridge or 500 cc bulk grease. Aluminum Die Cast Head

G23For use with 14 oz. (400 gms) grease cartridge or 500 cc bulk grease. Powder coated Aluminum Die Cast Head & Heavy Duty Lever handle

CARTRIDGELOADING

6,000 PSI413 BAR

SUCTIONFILL



CAT. NR.


Steel Head

Aluminum Die Cast Head

Powder Coated Aluminum Die Cast Head

G1R/STD/B

G1R/STD/M

G1R/STD/N

G1R/STD/DC/B

G1R/STD/DC/M

G1R/STD/DC/N

G23R/B

G23R/M

G23R/N

42400

42401

42402

42450

42451

42452

42430

42431

42432

42420

42421

42422

42470

42471

42472

42440

42441

42442

1/8” BSPT

M10 x 1

1/8” NPT

1/8” BSPT

M10 x 1

1/8” NPT

1/8” BSPT

M10 x 1

1/8” NPT

G1F/STD/B

G1F/STD/M

G1F/STD/N

G1F/STD/DC/B

G1F/STD/DC/M

G1F/STD/DC/N

G23F/B

G23F/M

G23F/N


CAT. NR.THREADS


*

**

*

Key

Best Seller *

CC 10

grease guns

AUTOMOTIVE

05

ESP Bomba de engrase serie - “V” FR Pistolet graisseur Serie - “V” DE Handhebelfettpressen reihe - “V”

Ÿ 21st Century design – ideal combination of superior quality & value price

Ÿ Aluminum Die Cast head with built-in-air release valve

Ÿ Soft rubber grip on lever handle for comfortable operation


Ÿ Hi visibility orange powder coated finish



‘V’ Series Lever Grease Gun

V1

Product Features


CAT. NR.


V1R/B

V1R/M

V1R/N

42900

42901

42902

42920

42921

42922

1/8” BSPT

M10 X 1

1/8” NPT

V1F/B

V1F/M

V1F/N


CAT. NR.THREADS


**

CARTRIDGELOADING

6,000 PSI413 BAR

SUCTIONFILL


Key

Best Seller *

CC 11

grease guns

Air ReleaseValve

06

ESP Pistola engrasador FR Pistolet graisseur DE Einhand-Fettpresse

Ÿ Lifetime product, ideal for frequent greasing applications

Ÿ Patented feather touch design for minimal effort

Ÿ Most useful for greasing in confined spaces or where access to grease fitting is restricted

Ÿ Incorporates a unique variable stroke feature, not common with Pistol Grease guns. This allows the gun to reach increased greasing pressures from short strokes & high greasing volumes from full strokes

Ÿ Machined to very close tolerances with perfect fits


Ÿ Capacity: 14 oz. (400 gms) grease cartridge or 500 cc bulk fill

Ÿ Delivers 1.1/2 times more grease per stroke & at the same time generating pressures upto 7,500 PSI (517 BAR)

Ÿ Complete with 9” (225 mm) high pressure flexible hose & professional 4 jaw coupler with ball check

Pistol Grease Gun - Professional

G32

Product Features

CARTRIDGELOADING

NO FALSELUBRICATION

7,500 PSI517 BAR

FILLER PUMPLOADING

VARIABLESTROKE

SUCTIONFILL

0.68 gm / stroke (1 oz. / 40 strokes)

*

Key

Best Seller


CAT. NR.

G32F-HP9/B

G32F-HP9/M

G32F-HP9/N

43061

43062

43063

1/8” BSPT

M10 x 1

1/8” NPT

THREADSORDERING NR.

*

*

Non slip textured

finish

Unique Lock Levermechanism allows user

to easily lock plunger rod in any position

Head incorporates a unique bulk loader, which doubles as an air bleeder

CC 12

grease guns

AUTOMOTIVE INDUSTRIAL AGRICULTURECONSTRUCTION

One piece aluminum die cast head & fixed handle offers extra strength & convenience in use

Designed for highest convenience in use with one hand operation & minimum

effort that any gun can offer

07


Ÿ Ergonomic One hand Operation Grease Gun

Ÿ Unique Variable Stroke Mechanism for both High Volume & High Pressure applications. High volume for faster greasing & High pressure for use in cold weather

Ÿ Change in stroke achieved through simple press of the movable handle

Ÿ Solid 0.43” (11mm) dia. Piston for more grease per stroke

Ÿ Drop Resistant Pistol Assembly

Ÿ Robust Aluminum Die cast Grease Gun Head with bulk filler

Ÿ Rolled cylinder threads offer maximum strength

Ÿ Handles NLGI 1, 2 & 3 Grease

Ÿ Complete with 12” (300 mm) high pressure flexible hose & professional 4 jaw coupler with ball check

‘Vario’ Premium Pistol Grip Grease Gun

G55

Product Features

CARTRIDGELOADING

7,000 PSI480 BAR

FILLER PUMPLOADING

SUCTIONFILL

Upto 0.84 gms / stroke


CAT. NR.

G55F-HP/B

G55F-HP/M

G65F-HP/B

43095

43096

43088

14 oz. (400 gms)

14 oz. (400 gms)

450 gms

500 cm³

500 cm³

650 cm³

1/8” BSPT

M10 x 1

1/8” BSPT

CARTRIDGECAPACITY

BULK CAPCITY

THREADSORDERING NR.

G65

G55For use with 14 oz. (400 gms) grease cartridge or 500 cc bulk grease

VOLUME

PRESSURE

VOLU

ME

PRESSURE

2

1

PUSH

UNIQUE VARIABLE STROKEHI PRESSURE / HI VOLUME

>

Push lever inwards to release lock

Lift or lower the adjustment lever to switch between high pressure and high volume

Variants

G65For use with 450 gms grease cartridge, popular in Australia & New Zealand

CC 13

grease guns


08

ESP Pistola engrasador “Ultimate” FR Pistolet graisseur - “Ultimate” DE Einhand-Fettpresse - “Ultimate”

‘Ultimate’ All Weather Pistol Grip Grease Gun

Ÿ All weather gun, designed especially for use in cold weather

Ÿ Large Grease Inlet with venturi action helps retain prime

Ÿ Double Lipped Rubber follower allows use with grease cartridge / bulk without any changeover


Ÿ Drop resistant Pistol Grip design

Ÿ Most useful for greasing in confined spaces or where access to grease fitting is restricted

Ÿ Machined to very close tolerances with perfect fits

Ÿ Compression Spring design allows greasing with minimal effort

Ÿ Capacity: 14 oz. (400 gms) grease cartridge or 500 cc bulk fill

Ÿ Works great with all grease types (NLGI 1, 2 & 3)

Ÿ Complete with 18” (450 mm) high pressure flexible hose & professional 4 jaw coupler

G70

Product Features

CARTRIDGELOADING

7,500 PSI517 BAR

FILLER PUMPLOADING

SUCTIONFILL

0.68 gm / stroke (1 oz. / 40 strokes)


CAT. NR.

G70F-HP18/B

G70F-HP18/M

G70F-HP18/N

43040

43041

43042

1/8” BSPT

M10 x 1

1/8” NPT

THREADSORDERING NR.

CC 14

grease guns


**

Key

Best Seller

Grease Gun Head with large grease inlet with venturi action

Premium Double LippedGrease Follower

Head incorporatesa unique bulk loader,which doubles as an

Air Bleeder

CompressionSpring

09


Pistol Grease Guns

Ÿ Most popular One Hand Operated Grease Gun designed for use in confined spaces or where access to grease nipple is restricted

Ÿ Heavy Duty Aluminum Die Cast Head & super strong pistol grip handle

Ÿ Pistol Handle designed to prevent fingers from “Pinching”

Ÿ Develops 5000 PSI / 345 BAR



Product Features

G5 G5-PRO G4-PST

Variants

G4-PSTFor use with 450 gms grease cartridge, popular in Australia & New Zealand. Head fitted with steel block nut

G5-PROFor use with 14 oz. (400 gms) grease cartridge or 500 cc bulk. Head fitted with bulk loader & air release valve. Comfortable vinyl grip on movable handle

CARTRIDGELOADING

5,000 PSI345 BAR

FILLER PUMPLOADING

(only in G5-PRO)

SUCTIONFILL


0.50 gm / stroke (0.70 oz. / 40 strokes)

CAT. NR.


G5R/B

G5R/M

G5R/N

G4R/PST/B

G5R/PRO/B

G5R/PRO/M

G5R/PRO/N

43000

43001

43002

43080

43050

43051

43052

43020

43021

43022

43085

43070

43071

43072

14 oz (400 gms)

14 oz (400 gms)

14 oz (400 gms)

450 gms

14 oz (400 gms)

14 oz (400 gms)

14 oz (400 gms)

500cm³

500cm³

500cm³

650cm³

500cm³

500cm³

500cm³

1/8” BSPT

M10 x 1

1/8” NPT

1/8” BSPT

1/8” BSPT

M10 x 1

1/8”NPT

G5F/B

G5F/M

G5F/N

G4F/PST/B

G5F/PRO/B

G5F/PRO/M

G5F/PRO/N


CAT. NR. CARTRIDGE

CAPACITY

BULK

CAPACITYTHREADS


*

* ***

Key

Best Seller

CC 15

grease guns

AUTOMOTIVE AGRICULTURE CONSTRUCTION

G5For use with14 oz. (400 gms)grease cartridgeor 500 cc bulk

10

ESP Pistola engrasador serie - “V” FR Pistolet graisseur serie “V” DE Einhand-Fettpresse reihe - “V”

‘V’ Series Pistol Grease Guns

Ÿ Value Priced One Hand Operated Pistol Grip Grease Gun

Ÿ Aluminium Die Cast head


Ÿ Hi visibility orange powder coated finish



Product Features

V5

CARTRIDGELOADING

SUCTIONFILL

5,000 PSI345 BAR



CAT. NR.


V5R/B

V5R/M

V5R/N

42950

42951

42952

42970

42971

42972

14 oz (400 gms)

14 oz (400 gms)

14 oz (400 gms)

500cm³

500cm³

500cm³

1/8” BSPT

M10 x 1

1/8” NPT

V5F/B

V5F/M

V5F/N


CAT. NR. CARTRIDGE

CAPACITY

BULK

CAPACITYTHREADS


CC 16

grease guns

V5For use with 14 oz. (400 gms) grease cartridge or 500 cc bulk grease

1112

ESP Pistola engrasador

ESP Pistola engrasador

FR Mini pistolet graisseur

FR Mini pistolet graisseur

DE Einhand-Fettpresse

DE Einhand-Fettpresse

Mini Pistol Grease Gun - Deluxe

Mini Pistol Grease Gun - Popular

Ÿ One hand Pistol grip Grease Gun with convenient pull type operating mechanism


Ÿ Available in a choice of textured zinc plated or powder coated finish

Ÿ Complete with 4" steel extension and 4 jaw coupler with ball check

Ÿ A low cost, compact tool box size grease gun, perfect for hard to reach jobs

Ÿ One hand pistol grip grease gun with push type operating mechanism

Ÿ Aluminum die cast head

Ÿ Capacity: 3 oz (85 gms) grease cartridge

Ÿ Textured powdered coated finish for non-slip grip

Ÿ Complete with 4" (100 mm) steel extension and 4 jaw coupler with ball check

Product Features

Product Features

G16

G15



CAT. NR.

CAT. NR.

Powder Coated Finish

G-16/B

G-16/M

G-16/N

G-15/B

G-15/M

G-15/N

43250

43251

43252

43200

43201

43202

43260

43261

43262

1/8” BSPT

M10 x 1

1/8” NPT

1/8” BSPT

M10 x 1

1/8” NPT

G-16/ZN/B

G-16/ZN/M

G-16/ZN/N

Zinc Plated Finish

CAT. NR. THREADS

THREADS

ORDERING NR.

ORDERING NR.

ORDERING NR.

CARTRIDGELOADING

CARTRIDGELOADING

SUCTIONFILL

3,500 PSI240 BAR

3,000 PSI207 BAR



*

**

*

* Key

Key

Best Seller

Best Seller

CC 17

grease guns

AUTOMOTIVE

13

ESP Bomba de engrase de doble efecto FR Pompe à graisse DE Stoßpressen

Push Type Grease Guns

Ÿ Push type grease gun for use with bulk grease only

Ÿ Compact toolbox size, ideal for greasing impact wrenches, lawn mowers, chain saws, trailers, ATV's, autos & trucks etc


Ÿ Comes complete with Universal connector

Ÿ Can be custom built with Pointed nozzle for special applications

Product Features

G6 G7

Variants

G6Steel body construction with 30 cc capacity

Push Gun being used to grease a pallet truck


CAT. NR.

G6P

G7P

43100

43101

30cm³

125cm³

BULK CAPCITYORDERING NR.

1,000 PSI69 BAR

HAND FILL

0.90 gm / shot(1 oz. / 32 shots)

** Key

Best Seller

Align Push Gun straight with fitting

Push with palm of hand

CC 18

grease guns

INDUSTRIAL

G7Steel body construction with 125 cc capacity

14

ESP Pistolas neumáticas de engrase FR Pistolet graisseur à air compimé DE Druckluftbetriebene Fettpressen

High Power Air Operated Grease Gun

Ÿ High power one shot air grease gun

Ÿ Designed with grease cylinder on top for optimal balance

Ÿ For use in factory maintenance, farm, fleet service or for use from vehicle air brake compressors

Ÿ Air Operating Range: 40 – 120 PSI (3-8 BAR)

Ÿ Pressure Ratio: 50:1

Ÿ Air Compressor Volume: 1 cfm / 0.026 cubic metre and above

Ÿ For use with 14 oz (400 gms) grease cartridge or 500 cc bulk fill

Ÿ Complete with 6" (150 mm) steel extension or 9” (225 mm) high pressure flexible hose & professional 4 jaw coupler

Product Features

G64

Head casting fitted with bulk loader valve

Extra Heavy Duty One Hand operation

with large clearance for trigger

AIR INLET threaded 1/4" NPT (F).

Each gun supplied with a male quick coupler fitting

Aluminum die castconstruction with

piston bore precision honed for rapid action


CAT. NR.


G64R/B

G64R/M

G64R/N

43360

43361

43362

43370

43371

43372

1/8” BSPT

M10 x 1

1/8” NPT

G64F-HP9/B

G64F-HP9/M

G64F-HP9/N

With High Pressure Flexible Hose & Coupler

CAT. NR.THREADS


* ** *

Key

Best Seller *

6,000 PSI413 BAR

CARTRIDGELOADING

SUCTIONFILL

FILLER PUMPLOADING

0.68 gm / shot(1 oz. / 40 shots)

Always use lubricatorunit with Air Suppy

CC 19

grease guns

AUTOMOTIVE INDUSTRIAL CONSTRUCTION

15

ESP Pistolas neumáticas de engrase FR Pistolet graisseur à air compimé DE Druckluftbetriebene Fettpressen

Air Operated Grease Guns

Ÿ Ideal for use in factory maintenance, agricultural applications, fleet service or for use on trucks connected to vehicle air brake compressors

Ÿ Air Operating Range: 40–120 PSI (3-8 BAR)

Ÿ Pressure Ratio: 40:1

Ÿ Air Compressor Volume: 1 cfm / 0.026 cubic metre and above

Ÿ Air inlet threaded 1/4" NPT (F)

Ÿ Each gun supplied with a male quick coupler fitting

Ÿ Available in 2 versions

INTERMITTENT: Grease discharge with every press of trigger

AUTOMATIC: Continuous grease discharge with the trigger pressed

Ÿ Complete with 6” (150 mm) steel extension or 12” (300 mm) flexible hose & professional 4 jaw coupler

Product Features

AGG-4PGG-1 PGG-4 AGG-1

Heavy Duty aluminum die cast head with internal bore precision honed for rapid action

Head castingfitting with bulkloader valve

Variants

PGG-4Intermittent Action with grease discharge per shot. For use with 450 gms grease cartridge, popular in Australia & New Zealand

AGG-1Automatic Action with continuous grease discharge. For use with 14 oz. (400 gms) grease cartridge or 500 cc bulk grease

AGG-4Automatic Action with continuous grease discharge. For use with 450 gms grease cartridge, popular in Australia & New Zealand

CC 20

grease guns

0.90 gm / shot(1.30 oz. / 40 strokes) for PGG400 gm / min(14 oz. / min) for AGG

Key

Best Seller *


CAT. NR.


Intermittent Action Gun

Automatic Action Gun

PGG/1R/B

PGG/1R/M

PGG/1R/N

PGG/4R/B

43300

43301

43302

43380

43320

43321

43322

43385

14 oz (400 gms)

14 oz (400 gms)

14 oz (400 gms)

450 gms

500cm³

500cm³

500cm³

650cm³

1/8” BSPT

M10 x 1

1/8” NPT

1/8” BSPT

PGG/1F/B

PGG/1F/M

PGG/1F/N

PGG/4F/B


CAT. NR. CARTRIDGE

CAPACITY

BULK

CAPACITYTHREADS


*

*

AGG/1R/B

AGG/1R/M

AGG/1R/N

AGG/4R/B

43303

43304

43305

43381

AGG/1F/B

AGG/1F/M

AGG/1F/N

AGG/4F/B

43323

43324

43325

43389

14 oz (400 gms)

14 oz (400 gms)

14 oz (400 gms)

450 gms

500cm³

500cm³

500cm³

650cm³

1/8” BSPT

M10 x 1

1/8”NPT

1/8” BSPT

CARTRIDGELOADING

4,800 PSI330 BAR

FILLER PUMPLOADING

SUCTIONFILL

PGG-1Intermittent Action with grease discharge per shot. For use with 14 oz. (400 gms) grease cartridge or 500 cc bulk

Ergonomic pistol grip and acute angle design allows

for ease of operation, especially in narrow spaces

AIR INLET threaded ¼” NPT(F). Each gun supplied with a male quick coupler fitting

CC 21

grease guns

AUTOMOTIVE INDUSTRIAL CONSTRUCTION

Always use lubricatorunit with Air Suppy

16

ESP Boquillas hidráulica FR Coupleur hydraulique DE Hydraulik-Greifkupplung

Hydraulic Couplers - Standard

grease gun accessories

HC-10 HC-11

Ordering Information - Standard

CAT. NR.

4 Jaw Couplers

HC/10/4/B

HC/10/4/M

HC/10/4/N

HC/11/4/B

HC/11/4/M

HC/11/4/N

HC/11/4/B/ST54

HC/11/4/M/ST54

HC/11/4/N/ST54

43516

43517

42518

43510

43511

43512

43581

43582

43583

1/8” BSPT

M10 x 1

1/8” NPT

1/8” BSPT

M10 x 1

1/8” NPT

1/8” BSPT

M10 x 1

1/8” NPT

THREADSORDERING NR.

* Key

Best Seller *

To engage,push straight on

To remove,Tilt, Twist & Pull

New

HC-10Ÿ Ideal for use on grease guns for general

maintenance Ÿ Narrow coupler design for use on fittings

with limited accessŸ Milled slot for easy tighteningŸ Fully hardened spring steel jaws

HC-11Ÿ Most popular use on grease guns for

general maintenance Ÿ Narrow coupler design for use on fittings

with limited accessŸ Milled slot for easy tighteningŸ Fully hardened spring steel jawsŸ Sold as individuals as well as 54 pc

merchandise pack

HC/11/4/B/ST54Most popular narrow design couplers with ball check available as a countertop display of 54 pcs

3,000 PSI207 BAR

3,000 PSI207 BAR

0.59”

(15 mm) 0.59”

(15 mm)

FOR HAND OPERATED GREASE GUNS


CC 22


HC-10 HC-11

17

ESP Boquillas hidráulica FR Coupleur hydraulique DE Hydraulik-Greifkupplung

Hydraulic Couplers - Professional

HC-14 HC-18

Ordering Information - Professional

4 Jaw Couplers 3 Jaw Couplers

CAT. NR.

HC/14/4/B

HC/14/4/M

HC/14/4/N

HC/14/4/B/ST54

HC/14/4/M/ST54

HC/14/4/N/ST54

HC/18/4/B

HC/18/4/M

HC/18/4/N

43500

43501

43502

43584

43585

43586

43535

43536

43537

43503

43504

43505

-

-

-

-

-

-

HC/14/3/B

HC/14/3/M

HC/14/3/N

-

-

-

-

-

-

1/8” BSPT

M10 x 1

1/8” NPT

1/8” BSPT

M10 x 1

1/8” NPT

1/8” BSPT

M10 x 1

1/8” NPT

CAT. NR. THREADSORDERING NR. ORDERING NR.

*

***



Key

Best Seller *

New

CC 23

HC-14Ÿ Best selling coupler for professional use Ÿ Hardened coupler body withstands high

pressure without deformationŸ Fully hardened spring steel jawsŸ Hexagonal nut for easy tighteningŸ Sold as individual as well as 54 pc

merchandise pack

6,000 PSI413 BAR

0.59”

(15 mm) 0.59”

(15 mm)


HC-18Ÿ For professional use Ÿ Hardened coupler body withstands high

pressure without deformationŸŸ Hexagonal nut for easy tightening

Fully hardened spring steel jaws

6,000 PSI413 BAR


HC/14/4/B/ST54Professional use 4 jaw couplers with hardened body, ball check and hexagonal nut that allows easy tightening, available as a countertop display of 54 pcs

1819

ESP Boquillas hidráulica

ESP Boquillas hidráulica

FR Coupleur hydraulique

FR Coupleur hydraulique

DE Hydraulik-Greifkupplung

DE Hydraulik-Greifkupplung

Hydraulic Couplers - Heavy Duty

Hydraulic Couplers Air - O

CC 24

HC-12

HC-P

Ordering Information - Heavy Duty

4 Jaw Couplers 3 Jaw Couplers

CAT. NR.

HC/12/4/B

HC/12/4/M

HC/12/4/N

43520

43521

43522

43523

43524

43525

HC/12/3/B

HC/12/3/M

HC/12/3/N

1/8” BSPT

M10 x 1

1/8” NPT

CAT. NR. THREADSORDERING NR. ORDERING NR.

*

Ordering Information - AIR-O

CAT. NR.

3 Jaw Couplers

HC/P/3/B

HC/P/3/M

HC/P/3/N

43540

43541

43542

1/8” BSPT

M10 x 1

1/8” NPT

THREADSORDERING NR.

*

FOR HAND AND AIROPERATED GREASE GUNS


0.67”

(17 mm)

Ÿ Recommended for use with air grease guns

Ÿ Hardened coupler body with double wall thickness withstands high pressure without deformation

Ÿ Fully hardened spring steel jaws

Ÿ Hexagonal nut for easy tightening

10,000 PSI690 BAR

Ÿ Recommended for use with grease control valves

Ÿ Hardened coupler body & all internal parts withstand high dynamic pressures without deformation

Ÿ Fully hardened reversible spring steel jaws for extended service life

Ÿ Hexagonal nut for easy tighteningŸ 100% pressure tested

7,500 PSI517 BAR

Key

Best Seller

Key

Best Seller

*

*To engage,push straight on





20

ESP 90° Boquillas hidráulica FR Coupleur angulaire pour graisse DE Hydraulik-Greifkupplung

Hydraulic Couplers - 90°

Ÿ Designed for right angled discharge of grease. Very useful for greasing fittings with limited access or in low heights where a grease gun with regular coupler is difficult to use, such as on Chrysler models

Ÿ Fits all standard grease guns

Ÿ An excellent coupler for effective lubrication of difficult & hard to reach grease fittings

Ÿ Jaws are fully hardened for extended service life

Ÿ Hardened coupler body & swivel joints withstand high-pressure applications without deformation

Ÿ Zinc plated finish

Ÿ Spring loaded ball check valve helps retain pressure

Product Features

HC-R

21

ESP 360° Boquillas hidráulica FR Coupleur pivotant 360° DE Hydraulik-Greifkupplung

Hydraulic Couplers - 360°

Product Features

HC-SW

Polyurethane seal in coupler fits

perfectly on grease fittings

Hardened slot in coupler

reduces wear



1,000 PSI69 BAR

7,000 PSI483 BAR



CAT. NR.

CAT. NR.

HC/R/01/B

HC/R/01/M

HC/R/01/N

HC/SW/3/B

HC/SW/3/M

HC/SW/3/N

43550

43551

43552

43560

43561

43562

1/8” BSPT

M10 x 1

1/8” NPT

1/8” BSPT

M10 x 1

1/8” NPT

THREADS

THREADS

ORDERING NR.

ORDERING NR.

Key

Best Seller

Key

Best Seller

*

*

*

*

Right angled coupler used for greasing the axle of a low height truck where access to the grease fittings is only through a side

Swivels in full 360° circle & locks conveniently at any 45°position.

45° angle gives easy access to most grease fittings

Hexagonal nut allows easy

tightening

CC 25


22

ESP Boquillas planas FR Agrafes DE Schiebekupplung

Button Head Couplers

Ÿ Zinc die cast coupler body for greasing button head fittings, found mostly on heavy machinery or contractor's equipment

Ÿ Couplers conveniently slide over the face of the button head fitting

Ÿ Metal seal increases resistance to wear

Product Features



CAT. NR.

BHC/10/B

BHC/10/N

HOC/1/B

PCN/1/B

PCN/2/B

PCN/2/M

PCN/2/N

PCN/3/B

PCN/3/M

PCN/3/N

43570

43572

43574

43577

43578

43566

43567

43579

43565

43576

5/8” (16 mm)

5/8” (16 mm)

5/8” (16 mm)

5/8” (16 mm)

7/8” (22 mm)

7/8” (22 mm)

7/8” (22 mm)

5/8” (16 mm)

5/8” (16 mm)

5/8” (16 mm)

1/8” BSPT

1/8” NPT

1/8” BSPT

1/8” BSPT

1/8” BSPT

M10 x 1

1/8” NPT

1/8” BSPT

M10 x 1

1/8” NPT

FOR BUTTON HEADFITTING SIZE

THREADSORDERING NR.

Key

Best Seller

*

*

*

PCN-3BHC-10 HOC-1 PCN-1 PCN-2

New

BHC-10Swivelling for 5/8” (16 mm) Button Head Fittings

HOC-1Fixed Hook-On for 5/8” (16 mm) Button Head Fitting

PCN-1Fixed Push-On for 5/8” (16 mm) Button Head Fittings

PCN-2Heavy Duty for 7/8” (22 mm) Giant Button Head Fittings

PCN-3Medium Duty for 5/8” (16 mm) Button Head Fittings

3,000 PSI207 BAR

3,000 PSI207 BAR

3,000 PSI207 BAR

7,500 PSI517 BAR

6,000 PSI413 BAR

CC 26


2324

ESP Acoplador- tipo espiga

ESP Administrador de agujas

FR Accouplements hyrauliques à cheville

FR Doseurs de type aiguille

DE Bajonettkupplung

DE Dispensierungs - Nadeinase

Hydraulic Coupler - Pin Type

Needle Nose Dispensers

Ÿ Provides quick, positive and leakproof connection with pin type fittings

Ÿ Hexagonal nut allows easy tightening

Ÿ Used for dispensing a fine line of grease

Ÿ Needle design allows operator to contact flush on hard to reach hydraulic type fittings in inaccessible areas

Ÿ Can be attached directly to steel extensions or flexible hoses

Ÿ Special model available with shroud

Product Features

Product Features

HC-13



3,000 PSI207 BAR



CAT. NR.

CAT. NR.

1/8” BSPT

Needle Nose Dispensers

Narrow Needle Nose Dispensers

1/8” NPT

HC/13/B

HC/13/N

DNN/1-8/B

DNN/1-8/S/B

(with shroud)

S/DNN/1-8/B

DNN/1-1-2/B

DNN/6/B

43530

43531

44850

44853

44854

44851

44852

44860

44861

44862

1/8” BSPT

1/8” NPT

DNN/1-8/N

Replacement shroud only

DNN/1-1-2/N

DNN/6/N

19/32”

19/32”

1.1/2”

6”

0.187”

0.187”

0.156”

0.156”

0.046”

0.046”

0.059

0.059

15

15

38

150

4.76

4.76

3.96

3.96

1.17

1.17

1.17

1.17

THREADS

CAT NR. NEEDLE LENGTH NEEDLE DIAMETER TIP DIAMETER

ORDERING NR.


Key

Best Seller

Key

Best Seller

*

**

*

*

inch inch inchmm mm mm

DN

N/1

-8

DN

N/1

-8/S

DN

N/6

CC 27


DN

N/1

-1-2

Needle Nose Dispenser used to Grease a fitting

with limited access

2526

ESP Agujas para injectar lubricación

ESP Administrador de sellar

FR Gicleur-aiguille pour graisse

FR Doseur pour colmatage

DE Fetteinspritz-Nadel

DE Schiebekupplung

Grease Injector Needles

Seal Off Dispenser

Ÿ Lubricates in very tight spaces such as universal joints and sealed bearings

Ÿ Equipped with grease fitting for quick connect operation

Ÿ Complete with protective plastic holder

Ÿ Available in standard or safety version with Aluminum Holder for safe & easy handling

Ÿ Used for lubricating cars with grease plugs

Ÿ Oil & grease resistant rubber tip

Ÿ Used with grease gun extension or hose

Product Features

Product Features

GIN




CAT. NR.

GIN/OO

GIN/01

GIN/02

GIN/03

44879

44880

44881

44882

Standard

Standard

Standard

Safety

1-1/2” (38 mm)

1-1/2” (38 mm)

1-1/2” (38 mm)

36 mm

16

18

21

18

TYPE NEEDLETHICKNESS (GAUGE)

ORDERING NR. NEEDLE LENGTH

Key

Best Seller *

*

Stainless Steel1.1/2” (38mm) long needle

Stainless Steel36mm long needle


CAT. NR.

SOD/01/B

SOD/01/N

TIP/SOD/01

44870

44871

44872

1/8” BSPT

1/8” NPT

(Replacement Tip only)

THREADSORDERING NR.

Replacement tipavailable as spare

New

CC 28


GIN/01

GIN/03

Aluminum Holder

2728

ESP Sostenedor de pistola de lubricación

ESP Sostenedor profesional para bomba de engrase

FR Support pour pistolet graisseur

FR Support robuste pour Pistolet graisseur

DE Fettpress-Halter

DE Fettpress-Halter

Grease Gun Holders

Heavy Duty Grease Gun Holder

Ÿ Simple snap action clamp for safe storage of grease guns and suction guns

Ÿ Mounts on almost any surface

Ÿ Manufactured from heavy gauge steel sheet with zinc plated finish

Ÿ Heavy Duty Grease Gun holder, designed specially for use on farm & construction equipment, trailers, tractors & other automobiles in high vibration environments

Ÿ Sturdy All Steel construction with a 4 bolt design for easy & secure mounting

Ÿ Heavy Duty Spring

Ÿ Works with both 14 oz. (400 gm) capacity Grease Guns with a 2-1/4” (57 mm) dia. , as well as with 450 gm capacity Grease Guns with 63.5 mm dia. popular in Australia & New Zealand

Product Features

Product Features

GGH



CAT. NR.

CAT. NR.

GGH/01

GGH/02

GGH/03

44840

44841

44842

2.1/4” (57 mm) on guns suitable for

14 oz. (400 gm) cartridge

63.5 mm on guns suitable for 450 gms

cartridge popular in Australia & New Zealand

2.1/4” (57 mm) &

in Australia & New Zealand

63.5 mm barrels popular

ORDERING NR.

ORDERING NR.

SUITABLE FOR BARREL DIAMETER

SUITABLE FOR BARREL DIAMETER

Key

Best Seller *

*

CC 29


GGH/01

GGH/02

4 Bolt Design

*Supplied withoutgrease gun

29

ESP Acoplamiento flexible FR Boyau flexible DE Panzerschläuche

Flexible Grease Hoses

Ÿ Grease hoses allow greasing access to nipples with limited reach. Due to their flexible construction, these are used for greasing hard to reach grease fittings

Ÿ Thermoplastic construction with 0.14" (3.6 mm) inner diameter & 0.33" (8.5 mm) outer diameter

Ÿ Highly flexible with minimum bending radius of 1.57" (40 mm)

Ÿ Zinc plated steel end connections with hydraulic crimping

Ÿ Select lengths available in the following variations:a. Hose fitted with heavy-duty spring

guardb. Hose fitted with professional 4 jaw

coupler with ball checkc. Hose fitted with Swivel

Product Features

GHC

CC 30


Ordering Information - Standard Grease Hoses

CAT. NR. CAT. NR. CAT. NR.

GHC-6/B

GHC-8/B

GHC-9/B

GHC-10/B

GHC-12/B

GHC-18/B

GHC-20/B

GHC-8/M

GHC-9/M

GHC-10/M

GHC-12/M

GHC-18/M

GHC-20/M

GHC-6/M GHC-6/N

GHC-8/N

GHC-9/N

GHC-10/N

GHC-12/N

GHC-18/N

GHC-20/N

43600

43601

43602

43603

43604

43605

43606

43611

43612

43613

43614

43615

43616

43610 43620

43621

43622

43623

43624

43625

43626

6” (150 mm)

8” (200 mm)

9” (225 mm)

10” (250 mm)

12” (300 mm)

18” (450 mm)

20” (500 mm)

LENGTH(END TO END)

ORDERING NR. ORDERING NR. ORDERING NR.

* ** *

*

**

1/8” BSPT M10 x 1 1/8” NPT

Key

Best Seller

Key

Best Seller **

NewNew

Working Pressure:3,500 PSI (240 BAR)

Burst Pressure:11,600 PSI (800 BAR)

Standard Grease Hose

Hose with Professional 4 Jaw Coupler

Hose with Spring Guard

Hose with Swivel

Never use beyondrecommendedworking pressure



CC 31

Ordering Information - With Spring Guard

Ordering Information - With Professional 4 Jaw Coupler

CAT. NR.

CAT. NR.

GHC-12/SPR/B

GHC-18/SPR/B

GHC-12/SPR/M

GHC-18/SPR/M

GHC-12/SPR/N

GHC-18/SPR/N

GHC-12/HC/14/4/B

GHC-18/HC/14/4/B

GHC-12/HC/14/4/M

GHC-18/HC/14/4/M

GHC-12/HC/14/4/N

GHC-18/HC/14/4/N

43660

43661

43670

43671

43680

43681

43630

43631

43640

43641

43650

43651

ORDERING NR.

ORDERING NR.

*

*

*

*

*

*

Ordering Information - With Swivel

CAT. NR.

GHC-12/SW/B

GHC-18/SW/B

GHC-12/SW/M

GHC-18/SW/M

GHC-12/SW/N

GHC-18/SW/N

43685

43688

43686

43689

43687

43690

ORDERING NR.

1/8” BSPT

1/8” BSPT

M10 x 1

M10 x 1

1/8” NPT

1/8” NPT

12” (300mm)

18” (450 mm)

12” (300mm)

18” (450 mm)

12” (300mm)

18” (450 mm)

THREADS

1/8” BSPT

1/8” BSPT

M10 x 1

M10 x 1

1/8” NPT

1/8” NPT

1/8” BSPT

1/8” BSPT

M10 x 1

M10 x 1

1/8” NPT

1/8” NPT

12” (300mm)

18” (450 mm)

12” (300mm)

18” (450 mm)

12” (300mm)

18” (450 mm)

12” (300mm)

18” (450 mm)

12” (300mm)

18” (450 mm)

12” (300mm)

18” (450 mm)

THREADS

THREADS

LENGTH(END TO END)

LENGTH(END TO END)

LENGTH(END TO END)

Always buy a good quality hose.Accidents caused bypoor quality hose can cause fatal injury

Hose fitted withProfessional 4 Jaw Couplerwith Ball Check

Hose fitted withheavy-duty spring guardthat imparts rigidity to the coupling end of the hose,allowing added safety &convenience in fitment

Hose fitted with swivel

30

ESP Acoplamiento flexible FR Boyau flexible DE Hochdruck-Panzerschläuche

Grease Hoses - Heavy Duty

Ÿ Superior Construction – Inner tubing is polyamide with polyurethane sheathing, reinforced diagonally in highly tear resistant polyester

Ÿ Hose has an inner diameter of 0.16" (4.1 mm) & an outer diameter of 0.425" (10.8 mm). Large inner diameter makes them ideal for use in cold weather

Ÿ Heavy duty zinc plated end connections hydraulically crimped to the hose

Ÿ Rolled threads for extra strength

Ÿ Select lengths also available in the following variationsa. Hose fitted with heavy-duty spring guard.

Used primarily with Grease Control Valvesb. Hose fitted with professional 4 jaw

coupler with ball check

Product Features

GHC-HP

CC 32


Ordering Information - Standard Grease Hoses

Ordering Information - With Professional 4 Jaw CouplerCAT. NR.

CAT. NR.

GHC/HP-12/B

GHC/HP-18/B

GHC/HP-20/B

GHC/HP-12/M

GHC/HP-18/M

GHC/HP-20/M

GHC/HP-12/N

GHC/HP-18/N

GHC/HP-20/N

GHC/HP-12/HC/14/4/B

GHC/HP-18/HC/14/4/B

GHC/HP-12/HC/14/4/M

GHC/HP-18/HC/14/4/M

GHC/HP-12/HC/14/4/N

GHC/HP-18/HC/14/4/N

43700

43701

43702

43710

43711

43712

43720

43721

43722

43730

43731

43740

43741

43750

43751

12” (300 mm)

18” (450 mm)

20” (500 mm)

12” (300 mm)

18” (450 mm)

20” (500 mm)

12” (300 mm)

18” (450 mm)

20” (500 mm)

12” (300 mm)

18” (450 mm)

12” (300 mm)

18” (450 mm)

12” (300 mm)

18” (450 mm)

1/8” BSPT

1/8” BSPT

1/8” BSPT

M10 x 1

M10 x 1

M10 x 1

1/8” NPT

1/8” NPT

1/8” NPT

1/8” BSPT

1/8” BSPT

M10 x 1

M10 x 1

1/8” NPT

1/8” NPT

LENGTH(END TO END)

LENGTH(END TO END)

ORDERING NR.

ORDERING NR.

THREADS

THREADS

*

*

*

*

*

*

*

*

*

*

*

*

*


Burst Pressure:13,775 PSI (950 BAR)

Never use beyondrecommendedworking pressure

Standard Grease Hose

Hose with Professional 4 Jaw Coupler

Hose with Spring Guard


CC 33

Ordering Information - With Spring Guard

CAT. NR.

GHC/HP-12/SPR/B

GHC/HP-18/SPR/B

GHC/HP-12/SPR/M

GHC/HP-18/SPR/M

GHC/HP-12/SPR/N

GHC/HP-18/SPR/N

43760

43761

43770

43771

43780

43781

12” (300 mm)

18” (450 mm)

12” (300 mm)

18” (450 mm)

12” (300 mm)

18” (450 mm)

1/8” BSPT

1/8” BSPT

M10 x 1

M10 x 1

1/8” NPT

1/8” NPT

LENGTH(END TO END)

ORDERING NR. THREADS

**

Key

* Best Seller


Hose fitted withheavy-duty springguard. Used primarily withGrease Control Valves

Hose fitted withprofessional 4jaw coupler with ball check

3132

ESP Acoplamiento flexible y Racor rigido - combinación

ESP Rotula para Bomba de Engrase

FR Boyau flexible tayau d’extension - Combinaison

FR raccords pivotant pour pistolet graisseur

DE Panzerschlauche dusenrohre, ohne mundstuck - Kombination

DE Drezeled flerakset für Handhebelfettpressen

Flexible / Rigid Grease Gun Extension

Grease Gun Extension Swivel

Product Features

Product Features

Ÿ Grease Gun Extension that works as a firm & rigid 13” ( 330 mm) long steel extension or converts into a flexible hose extension for greasing hard to reach fittings

Ÿ Switches with one hand by a simple slide of the steel tube

Ÿ Supplied complete with Grease Gun Coupler

Ÿ Ideal for use with Grease Control valves

Ÿ Grease Gun extension swivel threaded 1/8” Male x 1/8” Female

Ÿ Female end of the swivel fits onto the Grease Gun extension & male end onto the Grease Gun outlet, enabling unrestricted movement without any bending, twisting or kink

Ÿ All steel construction in plated finish


Max. Working Pressure:

3,500 PSI (240 BAR)




CAT. NR.

CAT. NR.

FRC/13/B

FRC/13/M

FRC/13/N

SWV/1-8M/1-8F/B

SWV/1-8M/1-8F/M

SWV/1-8M/1-8F/N

44810

44811

44812

44885

44886

44887

1/8” BSPT

M10 x 1

1/8” NPT

1/8” BSPT

M10 x 1

1/8” NPT

THREADS

THREADS

ORDERING NR.

ORDERING NR.

Switches with one hand


CC 34


Key

Best Seller **

Push to convert

from Rigid to

Flexible Extension

3334

ESP Racor rígido

ESP Cartucho grasa

FR Tuyaud’extension pour pistolet de graissage

FR Cartouche de Graisse

DE Düsenrohre, ohne Mundstück

DE Fettkartuschen

Grease Gun Steel Extensions

Grease Cartridge

Ÿ Steel construction with bright zinc plated finish

Ÿ High strength rolled threads on both ends

Ÿ Available in straight & bent construction

Other lengths can be custom built on requestNote

Product Features


CAT. NR.

Bent

Straight

GBP/6/B

GBP/6/M

GBP/6/N

GBP/8/M

GBP/18/N

GSP/4/B

GSP/4/M

GSP/4/N

GSP/5/N

GSP/6/B

GSP/6/N

GSP/8/M

44800

44801

44802

44804

44809

6” (150 mm)

6” (150 mm)

6” (150 mm)

8” (200 mm)

18” (450 mm)

44820

44821

44822

44823

44827

44829

44817

4” ( 100 mm)

4” ( 100 mm)

4” ( 100 mm)

5” (125 mm)

6” (150 mm)

6” (150 mm)

8” (200 mm)

1/8” BSPT

M10 X 1

1/8” NPT

M10 X 1

1/8” NPT

1/8” BSPT

M10 X 1

1/8” NPT

1/8” NPT

1/8” BSPT

1/8” NPT

M10 X 1

LENGTH(END TO END)


6,000 PSI413 BAR

Ÿ 14 oz. (400 gms )of Premium Lithium Complex Red Grease

Ÿ NLGI Grade II

Ÿ Operating Temperature: - 40°C (-40° F) to 149°C (300°F)

Ÿ Non messy, totally clean, offers highest convenience in use

Ÿ Useful in automotive, industrial, construction & agricultural applications

Product Features


CAT. NR.

CTG/01 45110 14 oz. (400gms)

CAPACITYORDERING NR.


CC 35

Straight

Bent

13°

3536

ESP Cargadores a granel/Conectadores de masilla

ESP Válvula del escape de aire

FR Graisseur de remplissage

FR Soupape d’évacuation d’air

DE Füllnippel

DE Luftventil

Bulk Loaders / Filler Nipples

Air Release Valves

Product Features

Product Features

Ÿ Spare loader valves for bulk loading grease guns using Filler pump

Ÿ Built in Ball Check


Ÿ Spare bleeder fitting for grease guns

Ÿ Vents air pockets in grease guns efficiently


0.58”(14.7 mm)

BLV/02 BLV/01 BLV/06 BLV/04

9 mm 0.48” 0.34”


CAT. NR.

1/8” BSPT M10 x 1 1/8” NPT

BLV/01/B

BLV/02/B

44830

44831

44833 44835

44834

44836

BLV/01/M BLV/04/N

BLV/02/N

BLV/06/N

Straight

Tapered

Tapered

CAT. NR. CAT. NR. ORDERING NR. TYPEORDERING NR. ORDERING NR.

Key

Used on Groz Grease Guns as standard


CAT. NR.

ARV/01/B

ARV/01/M

ARV/01/N

44839

44837

44838

1/8” BSPT

M10 x 1

1/8” NPT

THREADSORDERING NR.

CC 36


Key

New

Press down to releasetrapped air in grease

AirRelease

Valve

37

ESP Empaquetador de sostén de acero FR Presse-étoupe de roulement DE Lager Verpackung

Deluxe Steel Bearing Packers

Product Features

BEP-01

Ÿ Useful for greasing bearings in cars, boats, tractors, RV's etc

Ÿ Rugged steel construction


CAT. NR.

BEP/01

BEP/625

BEP/625WB

44845

44847

44848

For use with Grease Guns

For use with Grease Guns

For use with Filler Pump

DESCRIPTIONORDERING NR.

BEP-625

Variants

BEP-01Bearing Packer with threaded center post for use with Grease Guns. The design incorporates grease nipple at one end, which easily adapts to the grease gun coupler. Suited for bearings with a min. inner diameter of 1/2" (12 mm), to a max. outer diameter of 5" (125 mm) and height from 1/4" (6 mm) to 2" (50 mm)

BEP/625/WBRapid action Bearing Packer for use with Grease Gun Filler Pump. Non threaded top cone for fast placement of bearings. Outer shaft is threaded ¼” NPT (F) & fits onto the Outlet Discharge Tube of the Grease Filler Pump. Suited for bearings with a min. inner diameter of 1/2" (12 mm), to a max. outer diameter of 6" (150 mm) and height from 3/8" (10 mm) to 2" (50 mm)

Always use recommended grade of grease. Some grades of grease cannot handle temperatures of wheel bearing applications

Do not use compressed air for cleaning the bearing prior to use with the bearing packer. This is unsafe and could damage the race


CC 37

Key

New

BEP-625Rapid action Bench Type Bearing Packer for use with Grease Guns. Non threaded top cone for fast placement of bearings. The design incorporates grease nipple on the outer shaft, which easily adapts to the grease gun coupler. Suited for bearings with a min. inner diameter of 1/2" (12 mm), to a max. outer diameter of 6" (150 mm) and height from 3/8" (10 mm) to 2" (50 mm)

38

ESP Engrasadores FR Graisseurs DE Schmiernippel

Grease Fittings

Product Features

Ÿ Manufactured to the most stringent quality standards – TS16949 approved manufacturing

Ÿ Available in a range of materials: EN-1A steel, 303 Stainless Steel, Brass etc.

Ÿ Fitting profile & dimensions are accurately controlled & conform to SAE, DIN, BS, JIS & IS standards

Ÿ Grease fittings are heat treated to SAE J534 specification with hardness on greasing end to a minimum of 83 on Rockwell 15N scale with a case depth of 0.005” (0.13 mm) to 0.009” (0.23 mm)

Ÿ Fittings with ball check use heat treated springs for increased life

Ÿ Steel fittings are plated in yellow zinc with a plating thickness of 0.0002” (5 microns) confirming to SAE J534 specification & have a guaranteed salt spray life of over 75 hours to red rust. Fittings can be custom manufactured in white zinc & also be made with trivalent passivation

Ÿ Also available 303 stainless steel fittings for marine applications

Ÿ Available ready from stock in a large selection of popular types & sizes, with many more variations custom manufactured

grease fittings & accessories

CC 38


CAT. NR.

GFT/1-4/28

GFT/1-4/28L

GFT/1-4/28/45

GFT/1-4/28/65

GFT/1-4/28/90

GFT/1-4/28/SFT

GFT/1-4/28/45/SFT

GFT/1-4/28/90/SFT

GFT/R/1-8/28

GFT/R/1-8/28L

GFT/R/1-8/28/45

GFT/R/1-8/28/45L

GFT/R/1-8/28/90

GFT/R/1-8/28/90L

46000

46002

46003

46005

46006

46030

46031

46032

46113

46116

46114

46117

46115

46118

Straight

Straight

45°

65°

90°

Straight

45°

90°

Straight

Straight

45°

45°

90°

90°

2.5 mm min.

5.1 mm min.

2.5 mm min.

2.5 mm min.

2.5 mm min.

2.5 mm min.

2.5 mm min.

2.5 mm min.

3.75 mm

6.5 mm

3.75 mm

6.5 mm

3.75 mm

6.5 mm

4.6 mm

8.6 mm

5.1 mm

5.1 mm

5.1 mm

5.1 mm

4.8 mm

4.8 mm

5.5 mm

8.0 mm

5.5 mm

8.0 mm

5.5 mm

8.0 mm

13.7 mm

17.3 mm

20.8 mm

18.5 mm

19.3 mm

14.0 mm

20.3 mm

19.3 mm

16.0 mm max.

20.0 mm max.

21.0 mm max.

26.3 mm

18.0 mm

21.4 mm

5/16”

5/16”

3/8”

3/8”

3/8”

5/16”

3/8”

3/8”

11.0 mm

11.0 mm

11.0 mm

11.0 mm

11.0 mm

11.0 mm

DESCRIPTIONDIMENSIONS ( FOR GUIDANCE ONLY)

Effective ThreadLength

1/4” - 28 SAE-LT - Taper Thread

1/4” - 28 Spl. Self Forming Threads

1/8” x 28 BSPT - Taper Threads

Shank Length

Overall Length

Hex SizeORDERING NR.

GFT/R/1-4/19

GFT/R/1-4/19/L

GFT/R/1-4/19/45

GFT/R/1-4/19/90

GFT/1-4/28-UNF

GFT/5-16/24-UNF

GFT/3-8/24-UNF

GFT/1-4/26-BSF

GFT/5-16/22-BSF

GFT/3-8/20-BSF

GFT/1-8/27S

GFT/1-8/27

GFT/1-8/27L

GFT/1-8/27/30

GFT/1-8/27/45

GFT/1-8/27/65

GFT/1-8/27/90

46103

46106

46104

46105

46500

46501

46503

46520

46521

46522

46046

46035

46037

46040

46041

46042

46044

Straight

Straight

45°

90°

Straight 1/4”-28

Straight 5/16”-24

Straight 3/8”-24

Straight 1/4”-26

Straight 5/16”-22

Straight 3/8”-20

Straight

Straight

Straight

30°

45°

65°

90°

4.2 mm

9.2 mm

4.2 mm

4.2 mm

2.5 mm min.

4.0 mm min.

4.4 mm min.

2.0 mm min.

2.5 mm min.

3.7 mm min.

4.0 mm min.

4.6 mm min.

5.6 mm min.

5.6 mm min.

5.6 mm min.

5.6 mm min.

5.6 mm min.

6.5 mm

10.7 mm

6.5 mm

6.5 mm

4.6 mm

6.35 mm

6.8 mm

4.6 mm

5.5 mm

5.5 mm

5.95 mm

7.1 mm

19.3 mm

7.6 mm

7.6 mm

7.6 mm

7.6 mm

17.5 mm

23.5 mm

22.5 mm

22.0 mm

15.0 mm

16.7 mm

16.7 mm

13.9 mm

15.0 mm

18.0 mm max.

14.3 mm

16.8 mm

32.0 mm

22.9 mm

21.8 mm

21.8 mm

21.3 mm

9/16”

0.60”

9/16” or 14 mm

9/16" or 14 mm

8.0 mm

7/16”

7/16”

7.0 mm

9.0 mm

11.0 mm

7/16”

7/16”

7/16”

7/16”

7/16”

7/16”

7/16”

1/4” x 19 BSPT - Taper Threads

UNF - Parallel Threads

BSF - Parallel Threads

1/8” - 27 Pipe Threads PTF - Special Short

AngledGrease Fitting - 45°

Angled Grease Fitting - 90°

Grease Fitting - Straight

HEX SIZE

EFFE

CT

IVE

TH

REA

DLE

NG

TH

OV

ERA

LL L

ENG

TH

SH

AN

K

LEN

GT

H

*

*

*

*

*

*

*

***

grease fitting & accessories

CC 39

Ordering Information (contd.)

CAT. NR.

GFT/1-8/27/SFT

GFT/1-8/27/45/SFT

GFT/1-8/27/90/SFT

GFT/1-4/18

GFT/1-4/18/45

GFT/1-4/18/65

GFT/1-4/18/90

GFT/6/1

GFT/6/1/45

GFT/6/1/90

46070

46071

46072

46020

46022

46021

46023

46200

46201

46202

Straight

45°

90°

Straight

45°

65°

90°

Straight

45°

90°

3.6 mm min.

2.8 mm min.

2.8 mm min.

6.0 mm min.

5.75 mm min.

5.6 mm min.

5.75 mm min.

3.75 mm min.

4.5 mm min.

4.5 mm min.

6.1 mm

5.1 mm

5.1 mm

10.7 mm

9.27 mm

8.7 mm

9.27 mm

5.5 mm max.

5.5 mm max.

5.5 mm max.

15.7 mm

19.8 mm

19.3 mm

22.0 mm

29.74 mm

24.6 mm

24.0 mm

16.0 mm max.

21.0 mm max.

18.0 mm max.

7/16”

7/16”

7/16”

9/16”

9/16”

9/16”

9/16”

7.0 mm

9.0 mm

9.0 mm

DESCRIPTIONDIMENSIONS ( FOR GUIDANCE ONLY)

Effective ThreadLength

1/8” - 27 Spl. Self Forming Threads

1/4” - 18 Pipe Threads - Special Extra Short

6.0 mm x 1.0 mm Taper Threads

Shank Length

Overall Length

Hex SizeORDERING NR.

GFT/8/1

GFT/8/1/45

GFT/8/1/90

GFT/8/1.25

GFT/8/1.25/45

GFT/8/1.25/90

GFT/10/1

GFT/10/1/45

GFT/10/1/90

GFT/10/1.5

GFT/10/1.5/45

GFT/10/1.5/90

GFT/DF/3-16

GFT/DF/1-4

GFT/DF/5-16

GFT/BHC/1-4/19

GFT/BHC/1-8/28

GFT/BHC/1-8/27

GFT/BHC/3-8/18

GFT/BHC/1-4/18

GN/PN/1-8

GN/PN/1-4

GN/PN/1-8/N

GN/PN/1-4/N

GFT/SS/1-4/28

GFT/SS/1-4/28/45

GFT/SS/1-4/28/90

GFT/SS/1-8/27

GFT/SS/1-8/27/45

GFT/SS/1-8/27/90

GFT/SS/1-4/18

GFT/SS/6/1

GFT/SS/1-8/28

46220

46222

46223

46221

46224

46225

46230

46231

46232

46240

46241

46242

46300

46304

46302

46400

46401

46420

46421

46422

43901

43900

43903

43902

46600

46601

46602

46610

46611

46612

46620

46630

46640

Straight

45°

90°

Straight

45°

90°

Straight

45°

90°

Straight

45°

90°

For 3/16” Drill

For 1/4” Drill

For 5/16” Drill

1/4” x 19 BSPF

1/8” x 28 BSPF

1/8” - 27 PTF SAE spl. Short

3/8” - 18 NPTF

1/4” - 18 NPTF

1/8” BSPT

1/4” BSPT

1/8” NPT

1/4” NPT

Straight, 1/4” - 28 SAE LT

45°, 1/4” - 28 SAE LT

90°, 1/4” - 28 SAE LT

Straight, 1/8” - 27 PTF

45°, 1/8” - 27 PTF

90°, 1/8” - 27 PTF

Straight, 1/4” - 18 PTF

Straight, M6 x 1

Straight, 1/8” - 28 BSPT

5.5 mm min.

3.75 mm min.

3.75 mm min.

3.75 mm min.

3.7 mm min.

3.7 mm min.

3.75 mm min.

3.75 mm min.

3.75 mm min.

3.75 mm min.

3.75 mm min.

3.75 mm min.

N.A

N.A

N.A

7.0 mm min

4.0 mm min.

4.76 mm min.

9.5 mm min.

6.75 mm min.

7.0 mm

10.0 mm

7.0 mm

10.0 mm

2.5 mm min.

2.5 mm min.

2.5 mm min.

4.6 mm min.

5.6 mm min.

5.6 mm min.

6.0 mm min.

3.75 mm min.

3.75 mm min.

6.5 mm max.

5.5 mm max.

5.5 mm max.

5.5 mm max.

5.5 mm max.

5.5 mm max.

5.5 mm

5.5 mm max.

5.5 mm max.

max.

5.5 mm max.

5.5 mm max.

5.5 mm max.

6.35 mm

6.35 mm

6.35 mm

7.4 mm

10.7 mm

12.3 mm

10.7 mm

8.7 mm

11.0 mm

8.0 mm

11.0 mm

8.0 mm

5.1 mm

5.1 mm

7.1 mm

7.6 mm

7.6 mm

10.7 mm

5.5 mm max.

5.5 mm max.

4.6 mm

16.0 mm max.

21.0 mm max.

18.0 mm max.

17.0 mm max.

21.0 mm max.

18.0 mm max.

16.0 mm max.

21.0 mm max.

18.0 mm max.

18.0 mm max.

21.0 mm max.

18.0 mm max.

13.1 mm

13.9 mm

13.9 mm

21.0 mm

15.3 mm

19.0 mm

24.2 mm

21.0 mm

27.0 mm

30.0 mm

27.0 mm

30.0 mm

13.7 mm

20.8 mm

19.3 mm

16.8 mm

21.8 mm

21.3 mm

22.0 mm

16.0 mm max.

16.0 mm max.

9.0 mm

9.0 mm

9.0 mm

9.0 mm

9.0 mm

9.0 mm

11.0 mm

11.0 mm

11.0 mm

11.0 mm

11.0 mm

11.0 mm

Dia. 5/16” (7.94 mm)

Dia. 11/32” (8.73 mm)

Dia. 3/8” (9.53 mm)

15.24 mm

15.24 mm

5/8”

3/4”

5/8”

10.0 mm

14.0 mm

10.0 mm

14.0 mm

5/16”

3/8”

3/8”

7/16”

7/16”

7/16”

9/16”

7.0 mm

11.0 mm



10.0 mm X 1 mm Taper Threads

10.0 mm X 1.5 mm Taper Threads

Drive Fittings

Button head Grease Fitting - Parallel Threads

Button head Grease Fitting - Taper Threads

Grease Fittings - Pin Type - Brass Construction

Stainless Steel Grease Fittings

Pin TypeGreaseFitting

ButtonHead

GreaseFitting

Key

Best Seller *

New

*

*

*

*

*

*

*

*

*

*

*

*

CC 40


Cat. Nr. Ordering Nr.

GFT/KIT/SAE-11043970


GFT/KIT/SAE-8043972


GFT/KIT/M-8043973


GFT/KIT/M-11043971


GFT/KIT/M-4443981


GFT/KIT/BSPT-5043976


GFT/KIT/SS/SAE-4043982

THREAD SPEC.

THREAD SPEC.THREAD SPEC.

THREAD SPEC.

THREAD SPEC.

THREAD SPEC.

THREAD SPEC.

1/8”-27 PTF

1/4”-28 SAE-LT

1/8”-27 PTF

1/4”-28 SAE-LT

M6 x 1

M8 x 1

M10 x 1

M6 x 1

M8 x 1

M10 x 1

M6 x 1

M8 x 1

M10 x

1/8”-28 BSPT

1/4”-19 BSPT

1/8”-27 PTF

1/4”-28 SAE-LT

30

20

25

15

20

15

15

30

20

20

10

6

10

20

10

10

10

15

15

10

10

10

10

10

20

10

10

6 6

6

5

5

5

5

5

5

5

5

15

15

10

10

45°

45°90°

90°

45° 90°

45°

45°

90°

90°

90°

90°

STRAIGHT

STRAIGHT STRAIGHT

STRAIGHT

STRAIGHT

STRAIGHT

STRAIGHT

ESP Engrasadores FR Graisseurs DE Schmiernippel

Grease Fittings (continued)

110 pcs of SAE Grease Fittings packed to a plastic box

80 pcs of SAE Grease Fittings packed to a plastic box

80 pcs of Metric Grease Fittings packed to a plastic box



50 pcs of BSPT Grease Fittings packed to a plastic box

40 pcs of Stainless Steel SAE Grease Fittings packed to a plastic box

Grease Fitting Sets

Key

Best Seller *

**

New


CC 41


GFT/ESO/KIT/SAE-10143977


GFT/ESO/KIT/M-10143978


GFT/GC/KIT/M-10043979


GFT/GC/KIT/SAE-10043980

THREAD SPEC.

THREAD SPEC.

THREAD SPEC.THREAD SPEC.

1/8”-27 PTF

1/4”-28 SAE-LT

ESO/1

ESO/2

M6 X 1

M8 X 1

M10 X 1

ESO/1

ESO/2

M6 X 1

M8 X 1

M10 X 1

Grease Fitting Caps (Red)

Grease Fitting Caps (Yellow)

Grease Fitting Caps (Black)

1/8”-27 PTF

1/4”-28 SAE-LT



Grease Fitting Caps (Black)

22

22

30

14

20

5

5

1

1

15

15

15

15

15

10

10

10

10

10

10

5 10 10

10

10

5

10

10

5

10

10

10

10

10

10

10

1

1

30° 65°

90°

90°45° 90°

45° 90°

45°

STRAIGHT

STRAIGHT

STRAIGHTSTRAIGHT

101 pcs of SAE Grease Fittings & Grease Fitting Tools packed to a plastic box

101 pcs of Metric Grease Fittings & Grease Fitting Tools packed to a plastic box

100 pcs of Metric Grease Fittings & Caps packed to a plastic box

100 pcs of SAE Grease Fittings & Caps packed to a plastic box


GFT/GK/M-6043983


GFT/GK/SAE-6043984

THREAD SPEC.

THREAD SPEC. M6 X 1

M8 X 1

M10 X 1

HC/14/4/N, Prof. 4 Jaw Coupler

HC/12/4/N, HD 4 Jaw Coupler

HC/R/01/N, 90° Coupler

DNN/1-8/N, Needle Nose Dispenser

1/8"-27 PTF

1/4"-28 SAE-LT

HC/14/4/N, Prof. 4 Jaw Coupler

HC/12/4/N, HD 4 Jaw Coupler

HC/R/01/N, 90° Coupler

DNN/1-8/N, Needle Nose Dispenser

20

12

12

1

1

1

1

15

25

4

4

1

1

1

1

4

4

4

4

4

90°

90°

45°

STRAIGHT

STRAIGHT

60 pcs of Metric Grease Fittings & Couplers packed to a plastic box

60 pcs of SAE Grease Fittings & Couplers packed to a plastic box


GFT/KIT/ULT/SAE-6543985


GFT/KIT/ULT/SM-6543986

THREAD SPEC.

THREAD SPEC.

1/8”-27 PTF

1/4”-28 SAE-LT

ESO/1

ESO/2



HC/14/4/N, Professional 4 Jaw Coupler

Grease Fitting Thread Tester

1/8”-27 PTF

1/4”-28 SAE-LT

M6 X 1

M8 X 1

ESO/1

ESO/2



HC/14/4/N, Professional 4 Jaw Coupler

Grease Fitting Thread Tester

15

15

1

1

5

5

2

1

5

5

5

5

45° 90°

90°

STRAIGHT

STRAIGHT

65 pcs of SAE Grease Fittings & Assortments packed to a plastic box

65 pcs of Metric, SAE Grease Fittings & Assortments packed to a plastic box

10

10

10

10

1

1

5

5

2

1

5

5

* *

40

ESP Engrasadores - Accesorio

ESP Las capuchas de la protección plástico para engrasadores

FR Graissiurs - Accessoire

FR Capuchons de protection plastiue pour graisseurs

DE Schmiernippel - zubehörteil

DE Schutz kapuzen des kunststoffs für schmiernippel

Grease Fitting Caps

Product Features

Product Features

Ÿ Great tool box accessory to sort out mixed fittings

Ÿ Aluminum construction with mounting holes

Ÿ Plastic Caps for Grease fittings are an easy way to keep contaminants out. These additionally help in colour coding the greasing points based on frequency of greasing or type of grease

Ÿ Designed with an inbuilt collar , these are most convenient in use & fit directly onto the greasing end of the fitting

Ÿ Made from a special plastic, these adjust to minor variations in fitting head diameter , as well as variations in temperature & practically fit all standard fittings designed for use with jaw type couplers

Ÿ Available in Black , Yellow & Red as standard with other colours that can be custom manufactured

Ÿ Sold in packs of 50

THREAD TYPE

NPT

METRIC

METRIC

METRIC

BSPT

UNF/ANF

BSW

BSF

1/8"

M6 X 1

M8 X 1

M10 X 1

1/8"

1/4"

1/4”

3/16"

1/4"

M6 X 0.75

M8 X 1.25

M10 X 1.5

1/4"

5/16"

5/16"

1/4"

SIZE

3/8"

3/8"

1/2"

5/16"

3/8"


CAT. NR.

THT/01 44895

ORDERING NR.

Designed to check 21 most popular thread types:


CAT. NR. COLOURORDERING NR.

3” (

75 m

m)

8-1/2” (207 mm)

39 Grease Fitting Thread Tester


CAP/GFT/BL/ST-50

CAP/GFT/RD/ST-50

CAP/GFT/YE/ST-50

46700

46701

46702

Black

Red

Yellow

CC 42

41

ESP Herramienta de engrasado tetradireccional corta FR Outil de graissage 4 directions - petite taille

Easy Out Tools

Product Features

Ÿ Handy, dual purpose tools for removing worn & broken grease fittings as well as re-tapping holes for installing new grease fittings

Ÿ Works with straight & angled fittings

Ÿ Available in small & large sizes for use on almost all threaded fittings

ESO

For installing angled greasefittings

For installing straight grease

fittings

ESO/2

ESO/1

Hardenedtap for re-tappingholes

Screw extractorfor removing

worn & broken grease fittings


CAT. NR.

ESO/1

ESO/2

44890

44891

Small

Large

5/16” & 3/8” (9 mm)

3/8” (9mm) & 7/16” (11 mm)

1/4” - 28

1/8” - 27

TYPE TAP RETHREADSORDERING NR. HEX SIZE

**

Key

Best Seller *


CC 43

42 “Drive Fit” Grease Fitting Installer

Product Features

Ÿ Specialty tools for installing straight & angled Drive-Fit Grease fittings into untapped holes

Ÿ Steel construction in zinc plated finish


CAT. NR.

FTS/01

FTA/01

44892

44893

Straight

Angled

FOR FITTING TYPEORDERING NR.

FTS/01

FTA/01

CC 44


Hand Guard

Grease Gun Coupler

Spare Seal

Flexible hoseattachment forhard to reach fittings

DE Schmiernippel frei

43

ESP Engrasadores libremente FR Graisseurs deboucher

Grease Fitting Unblocker

Product Features


CAT. NR.

GFU/01 44894

ORDERING NR.

GFU

Ÿ Opens clogged grease fittings and loosens hardened grease joints

Ÿ Excellent for maintaining and protecting bearings, control arms, joints, king pins, etc.

Ÿ Tool has an all steel construction & is designed to be tapped with a hammer to force a light viscosity oil through the tool into the coupler & finally into the grease joint, breaking up and removing dirt and debris

Ÿ Built-In Hand Guard for added safety in use

Ÿ Flexible hose attachment reaches fittings in difficult areas

Ÿ Comes complete with grease coupler for connection onto the grease fitting and 2 spare seals for replacing the piston seals as they wear out

Quick Connection Systems

A simple and effective system that renders versatility to Grease Guns

Greasing in inaccessible, difficult to reach areas becomes very convenient with the use of any of the Quick Link accessories. No threads, no screwing or unscrewing, just snap on and use on sealed bearings, U-joints, high-pressure insert fittings and recessed fittings

Ready to use range is detailed in the following pages. Various other combinations, however can be devised based on specific application and need

The system is suitable for use with hand operated grease guns only

Quick Connect!Connect or disconnect with a snap

STEP 1Retract sleeve of the quick connect system

STEP 2Snap on the system by simply “Plugging On” the grease fitting to the coupler

STEP 3Ensure that the quick connect system is secure

STEP 4Release the sleeve of the quick connect system. The sleeve automatically slides over the coupler to encaseit securely

To diconnect, simply reverse the operation

44

ESP Adaptadora de conexión rápida FR Adaptateur rapide DE Schnell-Schieben-adapter

Quick Connect Adaptors

RLA-01Professional Recessed Lube Adaptor for push on greasing of recessed fittings where obstructions would not permit the use of a regular hydraulic coupler

ANN-4Needle Nose Adaptor Useful for dispensing a fine line of grease through the needle nose in greasing hard to reach fittings on trucks, vans, and recreational vehicles. Supplied with a small and a large locking sleeve to fit all couplers

AQDNeedle Nose Adaptor Useful for dispensing a fine line of grease through the needle nose in greasing hard to reach fittings on trucks, vans, and recreational vehicles. Supplied with a small and a large locking sleeve to fit all couplers. Also available with Protective Shroud

HC/SW/3/QProfessional 360° Swivel Coupler Useful for effective lubrication of difficult & hard to reach grease fittings. Coupler swivels in full 360° circle & can be locked at intervals of 45°

ALA-01Professional 90° Angle Lube Adaptor for greasing inaccessible grease fittings in shoulders and other confined areas

ANN/1-1-2Professional Narrow Needle Nose Adaptor designed for greasing flush or hard to reach hydraulic type fittings in inaccessible areas

Tip: 1/4” (6.35 mm)

Tip: 0.046” (1.17 mm)

Tip: 0.046” (1.17 mm)

Tip: 0.059” (1.5 mm)

Body Diameter:0.31” (8 mm)

Needle Diameter:1/4” (6.35 mm)

Needle Diameter:0.187” (4.76 mm)

Greasing EndDiameter:0.19” (4.9 mm)

Needle Diameter:0.156” (3.96 mm)

CAT. NR.

CAT. NR. CAT. NR.

CAT. NR. CAT. NR.

CAT. NR.

RLA/01

ANN/4 HC/SW/3/Q

ALA/01 ANN/1-1-2

AQD/11-16/BAQD/11-16/NAQD/11-16S/B with shroud

44921

44905 44911

44922 44920

449024490344904

ORDERING NR.



ORDERING NR.

Leng

th: 3

-1/2

” (89

mm

)

Leng

th: 4

” (10

0 m

m)

Leng

th: 1

9/32

” (1

5 m

m)

Leng

th: 1

.1/2

” (3

8 m

m)

CC 46

quick link

GBP/6/HC/14/4/QCoupler to Coupler Extension 6" (150 mm) angled delivery tube and 4 jaw professional coupler fitted onto the quick disconnect adaptor. Serves as an extra length extension on grease guns. Fits straight onto the grease gun coupler

POC/1/QJaw Type Coupler to Button Head Coupler Push on button head coupler fitted onto the quick disconnect adaptor. For quick conversion of jaw type couplers to button head coupler for use on 5/8” (16 mm) button head grease fittings directly. Fits straight onto the grease gun coupler

HC/R/01/Q

Regular Coupler to Right Angled Coupler Right angle coupler fitted onto the quick disconnect adaptor. For quickly converting regular couplers for greasing fittings with limited access, in low height areas etc. Fits straight onto the grease gun coupler

SOD/01/QJaw type Coupler to Seal Off Dispenser Seal Off Dispenser fitted onto the quick disconnect adaptor. For quickly converting regular couplers for lubricating automobiles with grease plugs etc. Fits straight onto the grease gun coupler

GHC-12/SPR/W/ADP Quick Connect Hose The Quick Connect Hose

converts steel extension coupler assembly on grease guns to a flexible hose and allows the gun to be used for greasing hard to reach fittings

GHC/GIN/QQuick Connect Grease Hose & Needle The Quick Connect Hose converts jaw type coupler on grease guns to a Grease Injector needle for greasing in very tight spaces such as universal joints & sealed bearings. Hose fitted onto the needle enables access onto hard to reach fittings as well as makes it easy to handle the needle without the risk of injury


GBP/6/HC/14/4/Q POC/1/Q HC/R/01/Q44906 44907 44908



SOD/01/Q GHC-12/SPR/W/ADP GHC/GIN/Q44909 44910 44875



Spring guard fitted on the coupling end provides rigidity making the coupling end snap easily onto grease fittings

Grease Fitting on the opposite end of the

hose snaps on conveniently

onto all Jaw type couplers

Stainless Steel1-1/2” (38 mm)

long, 18G needle

quick link

CC 47

Max. WorkingPressure3,500 PSI(240 BAR)

46

ESP Equipo de accesorios lubricantes para artículos dif ícil de alcanzar

FR Ensemble d’accessoires pour lubrification dans les espaces à accès limité DE Schnell - Schlieben adapter kit

Ezee - Lube Kit

Product Features

The Ezee-Lube kit comprises of a range of quick connect lube accessories. Useful for even the most difficult greasing jobs. The constituents convert any grease gun fitted with jaw type coupler into special application greasing. This helps in effective lubrication of grease plugs, sealed bearings, push on greasing of recessed fittings or fittings in shoulders, low height areas or an extension for reaching those “deep” places


CAT. NR.

GAK/7 44950

ORDERING NR.

GAK-7

Key

Best Seller **

45

ESP Adaptador de desconexión rápida FR Adaptateur à attache rapide DE Schnell - Entkuppler Anpasser

Quick Disconnect Adaptor

Product Features

Ÿ Adaptor with grease fitting on one end and male threads on the other

Ÿ Threaded end can be screwed onto any dispenser with 1/8" female threads, thus allowing for quick connect greasing applications

Ÿ Supplied with a small and large locking sleeve to fit all couplers


CAT. NR.

AQD/11-16/UF/BAQD/11-16/UF/N

44900

44901

1/8” BSPT

1/8” NPT

THREADSORDERING NR.

Supplied with a small and large locking sleeve to fit all couplers


quick link

CC 48

RLA

/01

GIN

/01

ALA

/01

AN

N/1

-1-2

SO

D/0

1/Q

HC

/R/0

1/Q

GHC/12/SPR/W/ADP

47

ESP Equipo neumatico de engrase - ration 50:1 FR Pompe pneumatique - rapport 50:1 DE Pneumatik-Fettpumpen 50:1

Composite Air Operated Grease Ratio Pumps 50:1

Product Features

Ÿ Compact Air Operated 50:1 Grease Ratio pump

Ÿ Operates off most small compressors with size as small as 0.08 cubic meter / minute (3 cfm)

Ÿ Ideal for applications having continuous need for high pressure grease in Industry, Workshops, Farm etc.

Ÿ Zinc construction makes them suitable for mining applications

Ÿ 2.83” (72 mm) dia. Air motor

Ÿ Grease Strainer at Suction tube inlet , ensures clean grease to the bearing

Ÿ Non corroding air motor design allows the pump to be used without an air line lubricator

Ÿ Fitted with a Pressure release valve- prevents both the pump & system against damage created by excessive pressure, possibly due to thermal expansion

Ÿ Comes complete with Drum Cover, Rubber lined follower plate , 7' (84”) of High Pressure Grease Hose, Z Swivel & Professional Grease Control Valve

WETTED COMPONENTS Zinc, hard chrome plated steel, brass, nitrile & polyurethane rubber

RECOMMENDED USE With light and self collapsing grease up to NLGI No. 2

GRP-03 GRP-04


CAT. NR.

GRP/501/03

GRP/501/04

45400

45401

25-50 lb / 20 kg /

5 gal. pails

120 lb / 50 kg /

16gal pails

12”

(310 mm)

15”

(381 mm)

9.1/2”

(241 mm)

12.11/16”

(322 mm)

11.11/32”

(288 mm)

15”

(380 mm)

1.08”

(27.5 mm)

1.08”

(27.5 mm)

O.D. Steel end O.D. Plate I.D. Grommet

FITS DRUM COVER

DIAMETER

FOLLOWER PLATE DIMENSIONSORDERING NR.

Control Valve threaded 1/4” (F)

at inletand 1/8” (F)

at outlet

Z swivel threaded ¼” NPT (M) x ¼” NPT (F)

Pump SpecificationsWorking Pressure

Maximum Air Pressure

Maximum Outlet Pressure

Air Inlet Connection

Pump Outlet Connection

Air Consumption

Grease Output (NLGI No. 2 Grease)

Noise Level

4 – 10 BAR (60 to 150 PSI)

10 BAR (150 PSI)

500 BAR (7500 PSI)

¼” NPT (F)

¼”NPT (F)

270 lt / min (72 GPM)

0.460 kg / min (1 lb / min)

85 db

Pump must be suppliedwith clean & dry compressed air via anFR unit

Available as spare: 84” high pressure

hose threaded ¼” NPT (M) HOSE/GRP/84

44346 Cat. Nr.

Ordering Nr.

GRP/501-03

20 kg/ 5 gal. pails. Suction tube length 17.5/16” (440 mm)

For use with 25-50 lbs /

Key

Best Seller *

*

Variants

For use with 120 lbs / 50 kg / 16 gal. pails. Suction tube length 31” (688 mm)

GRP/501-04

grease pumps & accessories

CC 49

48

ESP Equipo neumatico de engrase - ration 50:1 FR Pompe pneumatique - rapport 50:1 DE Pneumatik-Fettpumpen 50:1

Air Operated Grease Ratio Pumps 50:1

Product Features

Pump Specifications

Ÿ World-class Industrial High Pressure Grease pumps with

guaranteed performance & hassle free operation

Ÿ Pump dispenses Grease at pressures upto 50 times the Air inlet pressure

Ÿ Designed to work in tough conditions - these are ideal for use in Industry, workshop, farm , construction or as part of the Mobile Grease system

Ÿ All metal construction , fully CNC machined with hardened wear resistant moving parts

Ÿ Reciprocating piston operated 2-1/2” (63 mm) dia. Air Motor

Ÿ Fitted with strainer at suction tube inlet for clean grease to the bearing

Ÿ Supplied complete with Drum Cover, rubber lined follower plate, 7' (84”) of high pressure grease hose, Z swivel & professional grease control valve

Ÿ Portable version available with built-in steel drum , complete with wheels & pull handle

WETTED COMPONENTSSteel, Brass, Aluminium, & Polyurethane

RECOMMENDED USEWith light and self collapsing grease up to NLGI No. 2

GP1 GP2 GP3 BGRP

Working Pressure


Maximum Outlet Pressure

Air Inlet Connection


Air Consumption

Grease Output (NLGI No. 2 Grease)

Noise Level

2 – 10 BAR (30 to 150 PSI)

10 BAR (150 PSI)

500 BAR (7500 PSI)

¼” BSP (F) / ¼” NPT (F)

¼” BSP (F) / ¼”NPT (F)

230 lt / min (61 GPM)

1.10 kg / min (2.42 lbs / min)

81 db

Control Valve threaded 1/4” (F)

at inlet and 1/8” (F) at outlet

Z swivel threaded ¼” (M) x ¼” (F)

Available as spare: 84” high pressure

hose threaded ¼” (M)

GP2For use with 120 lbs /

50 kg / 16 gal. pails. Suction tube length

28.3/4” (730 mm)

Pump must be suppliedwith clean & dry compressed air via anFRL unit


CC 50


CAT. NR.

BSP Threads

GP1/ST/501/BSP

GP2/ST/501/BSP

GP3/ST/501/BSP

45410

45411

45412

45415

45416

45417

25-50 lb / 5 gal. /

20-30 kg pails

120 lb / 16 gal. /

50-60 kg pails

400lb /

180 kg drums

12”

(310 mm)

15”

(381 mm)

24.1/2”

(612 mm)

9.1/2”

(241 mm)

12-11/16”

(322 mm)

21-5/8”

(550 mm)

11-11/32”

(288 mm)

15”

(380 mm)

23-11/16”

(602 mm)

1.16”

(29.5 mm)

1.16”

(29.5 mm)

1.16”

(29.5 mm)

GP1/ST/501/N

GP2/ST/501/N

GP3/ST/501/N

NPT Threads O.D. Steel end O.D. Plate I.D. Grommet

CAT. NR. FITS DRUM COVER

DIAMETER

FOLLOWER PLATE DIMENSIONSORDERING NR. ORDERING NR.

Variants

GP1For use with 25- 50 lbs / 20 kg / 5 gal. pails. Suction tube length 17.5/16” (440 mm)

BGRP/30Portable Grease Pump with built-in 30 kg Grease Bucket

BGRP/50Portable Grease Pump with built-in 50 kg Grease Bucket

GP3For use with 400 lbs / 180 kg Drums. Suction tube length 37-3/8” (950 mm)


CAT. NR.

BGRP/30

BGRP/50

45430

45431

30 kg

50 kg

BUCKET CAPACITYORDERING NR.


CC 51

Key

Best Seller *

* *

New

49

ESP Pistola de control para engrase - alta presion FR Soupape de controle hydraulique DE Htøjtrykssmtørepistol

Grease Control Valve - Professional

Product Features

Ÿ Premium quality Grease Control valve, for use with air operated grease pumps

Ÿ Provides continuous grease flow, with trigger fully pressed

Ÿ Steel construction, provides durability & longevity

Ÿ Ergonomically designed pistol handle

Ÿ Available as valve only, or fitted with 360° Z Swivel

Ÿ Comes complete with 6” steel extension & heavy duty coupler

Ÿ Available in a choice of inlet thread sizes

APG-04


CAT. NR.

Valve Only

Valve Fitted with Z Swivel

APG/04/1-8F/B

APG/04/1-4F/B

APG/04/1-4F/M

APG/04/1-8F/N

APG/04/1-4F/N

APG/04/Z/1-4F/B

APG/04/Z/1-4M/B

APG/04/Z/1-4F/M

APG/04/Z/1-4F/N

APG/04/Z/1-2-27M/N

43400

43401

43402

43403

43404

43420

43421

43422

43423

43424

1/8” BSPT (F)

1/4” BSPT (F)

1/4” BSPT (F)

1/8” NPTF (F)

1/4” NPTF (F)

1/4” BSPT (F)

1/4” BSPT (M)

1/4” BSPT (F)

1/4” NPTF (F)

1/2” -27 NS (M)

1/8” BSPT (F)

1/8” BSPT (F)

M10 x 1 (F)

1/8” NPT (F)

1/8” NPT (F)

1/8” BSPT (F)

1/8” BSPT (F)

M10 x 1 (F)

1/8” NPT (F)

1/8” NPT (F)

INLET THREADSPECIFICATION

ORDERING NR.OUTLET THREADSPECIFICATION

*

*

*

*

APG/04/1-4F/NValve Only

APG/04/Z/1-4F/NValve fitted with

Z Swivel

Skin Injection Hazard. Keep awayfrom nozzle

The gun is continuous action. Becareful not to over lubricate.

CAUTION

Key

Best Seller *

Max. WorkingPressure7,500 PSI517 BAR


CC 52

+

++ Standard on Groz

Air OperatedGrease Raio Pumps

50

ESP Pistola de control para engrase - alta presion FR Soupape de controle hydraulique DE Htøjtrykssmtørepistol

Grease Control Valves - Booster

Product Features

Ÿ Heavy Duty Grease control valve with built-in pressure boost mechanism. Provides continuous flow with pistol handle fully pressed

Ÿ Pressure boost achieved through repeated actuation of the pistol handle. Boosts line pressure from 6,000 PSI (400 BAR) to 10,000 PSI (690 BAR); extremely useful to unblock frozen grease fittings

Ÿ Heavy Duty steel construction, provides durability & longevity

Ÿ Ergonomically designed pistol handle

Ÿ Available as valve only, or fitted with 360° Z Swivel

Ÿ Comes complete with 6” (150 mm) steel extension & coupler

Ÿ Available in a choice of inlet thread sizes

APG APG-PR

Ordering Information Ordering Information

CAT. NR. CAT. NR.

Control Handle Control Handle with Pressure relief valve

Control Handle with Z Swivel Control Handle with Pressure relief valve & Z Swivel

APG/1-8F/B

APG/1-4F/B

APG/1-4F/M

APG/1-8F/N

APG/1-4F/N

APG/PR/1-8F/B

APG/PR/1-4F/B

APG/PR/1-4F/M

APG/PR/1-8F/N

APG/PR/1-4F/N

APG/Z/1-4F/B

APG/Z/1-4M/B

APG/Z/1-4F/M

APG/Z/1-4F/N

APG/Z/1-2-27M/N

APG/PR/Z/1-4F/B

APG/PR/Z/1-4M/B

APG/PR/Z/1-4F/M

APG/PR/Z/1-4F/N

APG/PR/Z/1-2-27M/N

43450

43451

43452

43453

43454

43460

43461

43462

43463

43464

43470

43471

43472

43473

43474

43465

43466

43467

43468

43469

1/8” BSPT (F)

1/4” BSPT (F)

1/4” BSPT (F)

1/8” NPTF (F)

1/4” NPTF (F)

1/8” BSPT (F)

1/4” BSPT (F)

1/4” BSPT (F)

1/8” NPTF (F)

1/4” NPTF (F)

1/4” BSPT (F)

1/4” BSPT (M)

1/4” BSPT (F)

1/4” NPTF (F)

1/2” -27 NS (M)

1/4” BSPT (F)

1/4” BSPT (M)

1/4” BSPT (F)

1/4” NPTF (F)

1/2” -27 NS (M)

1/8” BSPT (F)

1/8” BSPT (F)

M10 x 1 (F)

1/8” NPT (F)

1/8” NPT (F)

1/8” BSPT (F)

1/8” BSPT (F)

M10 x 1 (F)

1/8” NPT (F)

1/8” NPT (F)

1/8” BSPT (F)

1/8” BSPT (F)

M10 x 1 (F)

1/8” NPT (F)

1/8” NPT (F)

1/8” BSPT (F)

1/8” BSPT (F)

M10 x 1 (F)

1/8” NPT (F)

1/8” NPT (F)



ORDERING NR. ORDERING NR.OUTLET THREADSPECIFICATION

OUTLET THREADSPECIFICATION

*

*

*

*

APGBooster Grease control

valve. Complete with Heavy Duty 4 Jaw

Coupler with ball check

Pressure Relief Valve

APG-PRBooster Grease control

valve with pressure relief valve on the outlet.

Opening the relief valve removes high pressure

from the coupler enabling easy coupler dis-connection

from the zerk fitting. Complete with 3 Jaw Professional coupler

without ball check

Max. WorkingPressure

10,000 PSI690 BAR

Key

Best Seller *

Skin Injection Hazard. Keep awayfrom nozzle

The gun is continuous action & easy to squeeze at all times. Be careful not to over lubricate

CAUTION


CC 53

51

ESP Rotula para engrase FR Raccords pivotants DE Drezeled Flerakset for smorepistøler

High Pressure Grease Swivels

Product Features

Ÿ Installed between the delivery hose & grease control valve, swivels permit easy handling of control valves and prevent damage to hose caused by twisting

Ÿ Swivels have a heavy duty steel construction with ball bearings for smooth operation and free unrestricted movement

Ÿ The swiveling joints are hardened for durability & wear resistance

Ÿ Available in three forms: Straight, 90° & Z–360°, in varying thread specifications. Other thread sizes can be made on request

HFC HFC-R HFC-S

HFCAllows 360°unrestricted 3 axes movement

HFC-SAllows 1 axes

Swivellingmovement

HFC-RAllows 90°2 axes movement


CAT. NR.

Straight Swivels

90° Swivels

Z - 360° Swivels

HFC/S/1-4F/1-4M/B

HFC/S/1-4F/1-8M/B

HFC/S/1-8M/1-8M/N

HFC/S/1-8F/1-8M/N

HFC/S/1-4M/1-2-27M/N

HFC/R/1-4F/1-4M/B

HFC/R/1-4F/1-8M/B

HFC/R/1-8M/1-8M/N

HFC/R/1-8F/1-8M/N

HFC/R/1-4M/1-2-27M/N

HFC/1-4M/1-4M/B

HFC/1-4F/1-4M/B

HFC/1-4F/1-8M/B

HFC/1-4F/1-8M/N

HFC/1-4F/1-4M/N

HFC/1-4M/1-2-27M/N

43800

43801

43802

43803

43804

43810

43811

43812

43813

43814

43820

43821

43822

43823

43824

43825

1/4” BSPT (F)

1/4” BSPT (F)

1/8” NPTF (M)

1/8” NPTF (F)

1/4” NPTF (M)

1/4” BSPT (F)

1/4” BSPT (F)

1/8” NPTF (M)

1/8” NPTF (F)

1/4” NPTF (M)

1/4” BSPT (M)

1/4” BSPT (F)

1/4” BSPT (F)

1/4” NPTF (F)

1/4” NPTF (F)

1/4” NPTF (M)

1/4” BSPT (M)

1/8” BSPT (M)

1/8” NPTF (M)

1/8” NPTF (M)

1/2” - 27 NS (M)

1/4” BSPT (M)

1/8” BSPT (M)

1/8” NPTF (M)

1/8” NPTF (M)

1/2” - 27 NS (M)

1/4” BSPT (M)

1/4” BSPT (M)

1/8” BSPT (M)

1/8” NPTF (M)

1/4” NPTF (M)

1/2” - 27 NS (M)

ORDERING NR. THREAD SPECIFICATIONS

****

Key

Best Seller *

360° Z SwivelAllows for convenient movement

of the control valve & prevents the high pressure hose from kinking

Max. WorkingPressure6,000 PSI413 BAR


CC 54

52

ESP Bomba de engrase - Portátil FR Pompe àgraisse manuelle légère DE Abschmier systeme - tragban

Portable Greasing System

Product Features

Ÿ Fully Portable & single person operation manual greasing system designed for volume greasing in workshop environments, site applications, on a pick-up truck, tractor, earth moving equipment etc.

Ÿ Pump is operated by foot press of the spring loaded system. The hose gets charged with grease, which can then be dispensed through the Super Gun fitted at the end of the hose. A single charge provides 30 shots of grease

Ÿ Aluminium die cast super gun develops greasing pressure and has High Pressure & Hi Volume settings, actuated through a simple switch. High pressure setting dispenses 0.45 gm of grease in each shot at 10,000 PSI. High volume setting dispenses 1.25 gms per shot

Ÿ High pressure feature is very useful to open blocked grease fittings

Ÿ Pump assembly is fully sealed to prevent contamination

Ÿ Pump comes complete with drum cover , rubber lined follower plate, premium ½” ID high pressure hose, Super gun fitted with steel extension & coupler. Model GS-5 additionally includes 11 lb. (5 kg.) plastic grease bucket

Ÿ GS-5 is supplied with a 1.5m long Hose, whereas GS-312 comes with a 2m long hose

WETTED COMPONENTS Aluminum, Steel, Brass, Polyurethane & Nitrile Rubber

RECOMMENDED USE For Grease up to and including NLGI No. 2

GS-5 GS-312

Switch for High Pressure/

High Volume setting

Super Gunwith 360°

Swivel

Foot Operated

High PressurePolyurethane hose 1/2” I.D.

GS/5


CAT. NR.

GS/5

GS/3-1-2

44250

44251

7-3/4” (197 mm)

7-3/22” (180 mm)

8-1/2” (216 mm)

6-7/8” (175 mm)

6-3/4” (171 mm)

4” (101 mm)

8-1/8” (206 mm)

6-3/4” (171 mm)

1.5 m

2.0 m

5 kg / 11 lb.

3.5 kg / 7 lb.

O.D. Steel end O.D. Plate

HOSE

LENGTH

BUCKETCAPACITY

DRUM COVER

DIAMETER

FOLLOWER PLATE DIMENSIONSORDERING NR.PUMP LENGTHBELOW DRUM

COVER

10,000 PSI690 BAR

1.25 gm / stroke on high volume setting


CC 55

Common sight on construction equipment requiring high volume routine greasing

Key

Best Seller **

New

53

ESP Bomba de engrase - robusta FR Distributeur de graisse Haute Pression DE Handbetriebenes Abschmiersystem

Bucket Greasers

Product Features

Ÿ Volume Grease Pump designed for quick effortless greasing in applications requiring everyday lubrication such as greasing of excavators & other earth moving equipment, agricultural equipment, automotive applications etc.

Ÿ The Pump delivers upto 9 gms (0.30 oz.) of Grease per stroke which is twice the amount of grease discharge by any other pump. Fully CNC machined to very close tolerances, the pump develops pressure upto 4000 PSI (275 BAR)

Ÿ Whereas most pumps work only with light Greases, the VGP series pumps work equally well with NLGI 1 , 2 & 3 Greases

WETTED COMPONENTS Steel, Aluminum, Brass & Nitrile Rubber

RECOMMENDED USE For Grease up to and including NLGI 3

VGP-6 VGP-10 VGP-15

Pistol handle fitted with Steel Grease extension & professional coupler

Lift Handle

Air Release Valve for easily removingtrapped air from grease

Max. grease level marked on the grease bucket

Includes 2m x 1/4” I.D.high pressure

rubber hose

Swivel Connector,allows easy

maneuverabilityof hose without

hose kinking

Steel Bucketwith foot rest

VGP/10A(without wheels)Capacity:10 kgs/22 lbs.

Variablehandlesetting

Aluminum Die Cast Pump


CC 56

Develops 2000 PSI with grease discharge of over 9 gms per stroke. Also useful for bulk filling grease guns

High Volume Setting

Medium Pressure -Medium Volume Setting Develops 3000 PSI with grease discharge upto7gms per stroke

High Pressure Setting Develops 4000 PSI with grease discharge upto4 gms per stroke

Variable Handle Setting

Upto 9 gms/stroke(0.30 oz. / stroke)

4,000 PSI275 BAR


CAT. NR.

VGP/6A

VGP/10A

VGP/15A

44280

44281

44282

44290

44291

44292

6 kg (13 lb.)

10 kg ( 22 lb.)

15 kg ( 33 lb.)

VGP/6

VGP/10

VGP/15

CAT. NR. BUCKET CAPACITYORDERING NR. ORDERING NR.

Without Wheels With Wheels

Key

Best Seller *

*

VGP/10(with wheels)Capacity:10 kgs / 22 lbs.



VGP/6A(without wheels)Capacity:6 kgs / 13 lbs.

VGP/15A(without wheels)Capacity:15 kgs / 33 lbs.

Variants


CC 57

54

ESP Bomba de engrase FR Pompe a chargement DE Fettfüllgeräte

Grease Filler Pump - Professional

Product Features

Ÿ Industry's # 1 bulk grease filling pump with extra heavy duty construction & discharge almost twice as much as any other filler pump

Ÿ Ideal workshop complement combining economical bulk grease purchasing with the portability of a hand operated grease pump

Ÿ Suitable for bulk filling grease guns, as well as transfer of grease from large to small containers

Ÿ Solid cast aluminum pump head, ergonomic steel pump handle, solid steel drum cover with lift handle & rubber lined follower plate

Ÿ Brass piston rings for minimal wear

Ÿ Variable handle setting for increased convenience in use with light & heavy greases

Ÿ Fully sealed to prevent contamination

RECOMMENDED USE For grease up to and including NLGI 3

J2

Variable handle setting for increased convenience in use with light & heavy greases

54 gms (1.9 oz.) / stroke


CAT. NR.

J2-03/BL/B

J2-03/BL/N

44216

44215

12” (310 mm)

12” (310 mm)

12” (310 mm)

12” (310 mm)

Rubber Lining

Rubber Lining

11.1/2”

(293 mm)

11.1/2”

(293 mm)

9.3/8”

(238 mm)

9.3/8”

(238 mm)

1.1/4”

(31.4 mm)

1.1/4”

(31.4 mm)

Suitable for 9 mm

straight loader

fittings

Suitable for 0.58”

American tapered

loader fittings

20 kg

5 gal.

(25-50 lbs)

O.D. Steel end O.D. Plate I.D. Plate

PAILCAPACITY

DRUM COVERDIAMETER

TYPE OF FOLLOWER

PLATE

FEMALELOADER ADAPTOR


PUMP LENGTHBELOW DRUM

COVER


CC 58

Follower Plate available as spare

FLP/238-29344328

Cat. Nr.Ordering Nr.

55

ESP Bomba de engrase FR Pompe a chargement DE Fettfüllgeräte

Grease Filler Pumps

Product Features

Ÿ Easy to use Grease filling solution to load bulk or combination grease guns from bulk grease pails

Ÿ No mess or waste. Full economy in buying bulk grease

Ÿ Complete unit includes zinc plated pump with zinc die cast pump head and cast aluminum adjusting flange, drum cover, follower plate & female loader fitting

Ÿ Brass piston rings mounted on zinc die cast piston for minimal wear

Ÿ Select models include follower plate with rubber lining for use with tapered drums

Ÿ Available with a choice of Female loader adaptors: Regular for use with American Tapered 0.58” (14.7 mm) male loader fittings or Universal which adapts to both European Straight (9 mm) and American Tapered 0.58” (14.7 mm) male loader fittings

RECOMMENDED USE For Light & self Collapsing Grease up to and including NLGI 2

GFP-02 GFP-03 GFP-04


CAT. NR.

GFP/02-PRO/UNI

GFP/03

GFP/03-PRO

GFP/03-PRO/UNI

GFP/04

GFP/04-PRO

GFP/04-PRO/UNI

44200

44210

44211

44212

44222

44220

44221

18” (457 mm)

18” (457 mm)

18” (457 mm)

18” (457 mm)

30” (760 mm)

30” (760 mm)

30” (760 mm)

287 mm

12” (310 mm)

12” (310 mm)

12” (310 mm)

15” (381 mm)

15” (381 mm)

15” (381 mm)

Rubber Lining

Steel

Rubber Lining

Rubber Lining

Steel

Rubber Lining

Rubber Lining

272 mm

11”

(280 mm)

11.11/32”

(288 mm)

11.11/32”

(288 mm)

13-5/8”

(346 mm)

15”

(380 mm)

15”

(380 mm)

230 mm

-

9.1/2”

(241 mm)

9.1/2”

(241 mm)

-

12.11/16”

(322 mm)

12.11/16”

(322 mm)

38 mm

1.1/2”

(38 mm)

1.1/2”

(38 mm)

1.1/2”

(38 mm)

1.1/2”

(38 mm)

1.1/2”

(38 mm)

1.1/2”

(38 mm)

Universal

American

American

Universal

American

American

Universal

12.5 kg

25-50 lb / 5gal.

25-50 lb / 5gal. / 20 kg

25-50 lb /5gal. / 20 kg

120 lb. / 50 kg

120lb. / 50 kg

120lb. / 50 kg


PAILCAPACITY

DRUM COVERDIAMETER

TYPE OF FOLLOWER

PLATE

FEMALELOADER

ADAPTOR


PUMP LENGTH

Variants Prime pump when using for the first time. Pour 30 ml. oil in to the pump outlet & operate lever handle till grease starts dispensing

Never exert undue pressure on the lever handle

GFP-02For use with 12.5 kg English grease pails

GFP-04For use with 120 lb. /50 kg American grease pails GFP/03-PRO/UNI

Key Best Seller *

*


CC 59

28 gms (1 oz.) / stroke

GFP-03For use with

25-50 lb. / 5 gal. American

grease pails

56

ESP Bomba de engrase alta presion FR Equipments manuels de graissage DE Handbetriebene Hochdruck-Fettpumpen

High Pressure Grease Pumps

Product Features

Ÿ An easy & portable high pressure hand operated grease pump

Ÿ Provides high pressure greasing, where power is not available or when an air operated grease pump cannot be afforded

Ÿ Useful for clean greasing of machinery, equipment, trucks & cars

Ÿ Pump has steel construction with aluminum cast head & solid steel pumping chamber

Ÿ Comes complete with Lift handle, Drum Cover, Rubber Lining Follower plate, 48” (1220 mm) flexible grease hose fitted with professional 4 jaw coupler. Model HPG-10 additionally includes a 10 kg (22 lb.) steel Grease Bucket

Lift Handle

Available as spare:48” flexible high pressure hose withcoupler

GHC-48/HC/14/4/B

44345

Cat. Nr.

Ordering Nr.

GFP/HP-03For use with

25-50 lb/20 kg. grease pails

HPG-10

Grease Bucket with FootrestIncludes 10kg (22 lb.) steel

GFP/HP-02For use with 12.5 kg Grease Buckets popular in the United Kingdom

Variants

Prime pump when using for the first time. Pour 30 ml. oil in to the pump outlet & operate lever handle till grease starts dispensing


CAT. NR.

GFP/HP-02/PRO

GFP/HP-03/PRO

HPG/10

44231

44230

44245

315 mm

13.11/16” (348 mm)

367 mm

287 mm

12” (310 mm)

224 mm

Rubber Lining

Rubber Lining

Rubber Lining

272 mm

11.11/32”

225 mm

230 mm

9.1/2”

195 mm

25 mm

1”

25 mm

12.5 kg

25-50 lb / 20 kg

10 kg


PAILCAPACITY

DRUM COVER

DIAMETER

TYPE OF

FOLLOWER PLATE


PUMP LENGTHBELOW DRUM

COVER

3,500 PSI240 BAR

1.5 gms / stroke (1 oz. in 19 strokes)

Key

Best Seller *

*

New

GFP-HP HPG-10


CC 60

57

ESP Plator seguidores FR Plaques d’ appui pour seaux coniques DE Fedtstempel

Follower Plates

Product Features

Ÿ A range of follower plates, for use with Grease pumps

Ÿ Follower plates eliminate channeling & air pockets, keep lubricants from contamination & assist in pumping all of the lubricant from containers

All Steel Follower PlatesThese are made out of plated sheet metal. The rubber grommet fitted on the centre ofthe follower plate is slid on the pump suction tube. Used commonly as a low cost alternative with straight grease pails

Variants

Rubber Lining Follower PlatesThese have a metal main body, with a grease resistant rubber lining. The rubber lining is very effective in wiping grease from container walls and eliminating any air pockets. A steel handle is welded onto the plate for easy removal of the plate, after the grease container is emptied. The rubber grommet fitted on the centre of the follower plate is slid on the pump suction tube. Useful for both straight & tapered grease pails

FP/01

FLP/255-282 FLP/255-282/1

Caution: Above recommendations may not work with all containers of similar capacity. Due to difference in lube container specifications from one company to another, there can be a difference in your container size. Above recommendations are based on most widely used container specifications worldwide. Pls. ensure that your lube container falls within the above specified follower plate dimensions, for using standard parts. Other follower plate sizes can be made on request.


CAT. NR.

All Steel Follower Plates

Rubber Lining Follower Plates

FP/01

FLP/346

FLP/230-272

FLP/230-272/1

FLP/241-288

FLP/241-288/1

FLP/241-288/2

FLP/241-288/6

FLP/322-380

FLP/322-380/2

FLP/322-380/6

FLP/550-602/6/GP3

44320

44329

44321

44334

44322

44323

44324

44330

44325

44326

44331

44333

11” (280 mm)

13-5/8” (346 mm)

230 mm

230 mm

9-1/2” (241 mm)

9-1/2” (241 mm)

9-1/2” (241 mm)

9-1/2” (241 mm)

12.11/16” (322 mm)

12.11/16” (322 mm)

12.11/16” (322 mm)

21-5/8” (550 mm)

11” (280 mm)

13-5/8” (346 mm)

272 mm

272 mm

11-11/32” (288 mm)

11-11/32” (288 mm)

11-11/32” (288 mm)

11-11/32” (288 mm)

15” (380 mm)

15” (380 mm)

15” (380 mm)

23-11/16” (602 mm)

1.1/2” (38 mm

1.1/2” (38 mm)

38 mm

25 mm

1-1/2” (38 mm)

1” (25 mm)

1.08” (27.5 mm)

1.16” (29.5 mm)

1.1/2” (38 mm)

1.08” (27.5 mm)

1.16” (29.5 mm)

1.16” (29.5 mm)

GPF/03

GPF/04

GFP/02

GFP/HP-02

GFP/03

GFP/HP-03

GRP/501/03

GP1, BGRP/30

GFP/04

GRP/501/04

GP2, BGRP/50

GP3

25-50 lb / 5gal.

120 lb / 16 gal. / 50 kg

12.5 kg

12.5 kg

25-50 lb / 5gal. / 20 kg

25-50 lb / 5gal. / 20 kg

25-50 lb / 5gal. / 20 kg

25-50 lb / 5gal. / 20 kg

120lb. / 16 gal. / 50 kg

120lb. / 16 gal. / 50 kg

120lb. / 16 gal. / 50 kg

400 lb / 180 kg

PAILCAPACITY

OUTER DIA. OFFOLLOWER PLATE

INNER DIA. OFGROMMET RUBBER

FOR USE WITHGROZ PUMP SERIES

ORDERING NR.

OUTER DIA. OF RIGID STEELEND OF FOLLOWER PLATE


CC 61

58

ESP Adaptadores para cargadores femeninas FR Adaptateur femellede chargement DE Loader Adapter

Female Loader Adaptors

Product Features

Ÿ Female adaptors are mounted on Grease Filler pumps for bulk filling Grease Guns

Ÿ Male Loader fitting on Grease Gun fits onto the female loader adaptor with the rubber seal in the adapter making the transfer leak proof

Ÿ Adaptors are threaded ¼” NPT (F)

ADP-9147Universal Bulk Loader ValveThis dual-purpose adaptor can be used with both 9 mm Straight & American Tapered 0.58” (14.7 mm) Bulk Loader Valves. The top sleeve adapts to 9mm straight loader valves, which may be removed, and the base used with the larger 0.58” (14.7 mm) loader fittings

SFA/1-4/NAdaptor for American Bulk Loader Valves only. These are designed for use with American Tapered 0.58” (14.7 mm) Bulk Loader Valves

Female Loader Adaptor mounted on Grease Filler Pump


CAT. NR.

SFA/1-4/N

ADP/9147

44360

44361

For American Tapered 0.58”(14.7 mm) loader valves

Universal Adaptor for use with both 9 mm Straight

& tapered 0.58” (14.7 mm) loader valves

TYPEORDERING NR.


CC 62

Lever Action Barrel Pumps / 64

Quart/Litre Stroke Pump / 67

Rotary Barrel Pumps / 68

Oil Lube Dispensers / 70

Spring Loaded Pumps / 71

Ezee Flo Pumps / 72

Air Operated Pumps & Accessories / 76

Electric Oil Pump / 79

Oil Control Guns & Accessories / 80

Oil Spigots / 84

Suction & Transfer Guns / 85

Oil Cans / 86

Measures / 89

Spill Proof Plastic Funnels / 90

what’s inside

equipmentOILING2

59

ESP Bomba de transvase con tubo telescópico FR Pompe à levier pour baril DE Håndpumpe

Lever Action Barrel Pumps

Product Features

Ÿ Most popular pump design, engineered for professional use

Ÿ Premium powder coated steel pump body with ribbed section aluminum die cast pump head for maximum strength

Ÿ Built-in 1.1/2” & 2” bung for use on drums with either openings

Ÿ Plated steel lever handle with rubber grip for convenience


CAT. NR.

Lever Action Barrel Pump

Antifreeze Barrel Pump

Antifreeze Barrel Pump with Nondrip

LBP/04

LBP/06

LBP/96

44100

44120

44125

ORDERING NR.

Key Best Seller *

*

LBP-04 LBP-06 LBP-96

Variants

LBP-04Oil Pump for use with oil

based fluids, heating oils, motor oils, heavy & light oils, Diesel & Kerosene. Non return seal is NBR

rubber. Pump is not suited for use with water based

fluids, solvents, acids, antifreeze, gasoline etc.

300 ml (10 oz. / stroke)

Ÿ Wear resistant Brass piston rings fitted onto zinc die cast piston

Ÿ Comes complete with curved metal spout & telescopic suction tube for use on 15 gallon (50 litres) – 55 gallons (205 litre) barrels

WETTED COMPONENTS Steel, Aluminum, Zinc, Brass, NBR & Viton* *not on LBP-04

oil pumps & accessories

CC 64

LBP-96 Basic pump is same as the LBP-06, except that the outlet discharge spout has a built-in aluminum die cast non drip attachment. Additionally outlet spout has a welded steel holder which performs a dual role - a) cover preventing any contaminants to enter inside the pump; b) holder for hanging buckets / containers for easy filling of media

LBP-06Antifreeze Barrel pump for use with Antifreeze, solvents, thinners, automotive additives, industrial chemicals, oil based fluids & other non corrosive liquids. Non return seal is Viton rubber. Pump is not suited for use with water based fluids, corrosive media, gasoline etc.

60

ESP Bomba de transvase FR Pompe a levier pour baril DE Fasspumpe

Lever Action Oil Pump

Product Features

EBP-01


CAT. NR.

EBP/01 44115

ORDERING NR.

Ÿ Ideal for dispensing oil from drums

Ÿ Value Engineered for optimal performance at an affordable cost

Ÿ Built-in 1.1/2” & 2” bung for use on drums with either openings

Ÿ Nitrile Rubber piston rings for smooth operation

Ÿ Self priming Hi volume Vertical Lift Pump for use with petroleum based media

Ÿ Steel construction with Aluminum die cast head, steel plunger rod & PTFE seals

Ÿ Piston is made from zinc with wear resistant brass piston rings

Ÿ Complete with 2” cast iron bung adaptor

WETTED COMPONENTS Steel, Aluminum, Zinc, Brass & PTFE

RECOMMENDED USE High viscosity petroleum based media, lacquer thinners

DO NOT USE With Gasoline, water based & other corrosive media

Ÿ Comes complete with curved metal spout & 2 pc threaded plastic suction tube for use on 15 gallon (50 litres) to 55 gallons (205 litre) barrels

WETTED COMPONENTS Steel, Aluminum, PVC & NBR

RECOMMENDED USE Oil based fluids, heating oils, motor oils, heavy & light oils, Diesel & Kerosene

DO NOT USE WITH Water based fluids, solvents, acids, antifreeze, gasoline etc.



61

ESP Bomba de transvase - Vertical FR Pompe de transfert - Vertical DE Faßpumpen

Vertical Lift Pump

Product Features

VLP


CAT. NR.

VLP/01 44130 55 gal. (205 litre) drums

ORDERING NR. FOR USE ON


CC 65

62

ESP Bomba de transvase FR Pompe à levier DE Håndpumpe

Front Action Barrel Pump

Product Features

A2

Ÿ Unique front action operation

Ÿ Makes pumping easy & allows the pump to be used on barrels placed in corners & other inaccessible areas

Ÿ Heavy Duty Aluminum Die Cast Pump head incorporates 2” bung threads

Ÿ Brass Piston rings for increased life

Ÿ No riveted parts, allows 100% serviceability

Ÿ “Built-in” nozzle holder for convenient storage of discharge hose

Ÿ Includes 1.8m PVC Nitrile delivery hose with metal nozzle, spring & hose clamp

Ÿ Comes complete with telescopic suction tube for use on 15 gallons (50 litre) – 55 gallons (205 litre) drums

WETTED COMPONENTS Steel, Aluminum, Brass, NBR and PVC Nitrile

RECOMMENDED USE For dispensing Diesel, Kerosene, Heating Oils, Motor Oils, Lubricating Oils (upto SAE 90), and other non-corrossive media

DO NOT USE With water based media, Antifreeze, Solvents, Acids, and Gasoline etc.

Pump variations available without hose / with Viton seals for use with Antifreeze & other reactive media

NOTE


CAT. NR.

A2H/BL 44110

ORDERING NR.

Position B

Built-InDrum Opener

2” Bung threads

Low heightdesign withcomplete barrel submerged within the container, allows for easein operation

1.8 m PVC nitriledelivery hose with

metal nozzle, spring and hose clamp.

Also available as spare SA/HOS/AA92/A2

44339CAT. NR.

Ordering Nr.


Variable Handle Setting for light or Heavy Fluids

Position A

set pivotpin here to pump lightfluids

set pivotpin here to pump heavyfluids

Telescopic Suction Tubeavailable as spare

A2/TP/1-20 44309



CC 66

63

ESP Bomba Rotativa - Volumen alto FR Pompe de Baril Rotative - Haut Volume DE Kurbelpumpe - Hoher Band

Quart / Litre Stroke Pump

Product Features

QSP-01


CAT. NR.

QSP/01 44187

ORDERING NR.

Ÿ An economical way to dispense exact quantity of media per stroke

Ÿ Heavy duty Industrial Pump that dispenses 1 Quart / 1 Litre per stroke

Ÿ Extremely useful in applications requiring metered delivery, the pump works on a precision rack & pinion mechanism

Ÿ Pump has a built in 2” Bung Adaptor & comes complete with a telescopic suction tube for use with 15 gallons (50 litre) – 55 gallons (205 litre) barrels

Ÿ Other design features include:

a. Spring Loaded Drain Back Tube for overflown media

b. Lockable handle which allows the pump to be pad locked, when not in use

c. Lock Nut for positioning the pump outlet in any direction

WETTED COMPONENTS Steel, Aluminum, Nitrile Rubber & Acetal

RECOMMENDED USE Gear & Lube Oil, Petroleum based Media , Diesel & Kerosene

DO NOT USE WITH Water Based & other corrosive fluids

Quart / LitreAdjustment

Screw

PumpOutlet

Latch forPad Locking

2” Bung Adaptorwith Lock Nut

SpringLoadedDrainBackTube

1 litre ( 1 quart ) / stroke

Rack

Pinion

PUMP INTERNALS


CC 67

64

ESP Bomba rotativa manual FR Pompe à rotation manuelle DE Kurbelpumpe Für Ölfässer

Rotary Barrel Pumps

Product Features

GNB-20 GNB-25


CAT. NR.

GNB-20T/SPL

GNB-25T/SPL

GNB-25/3R/SPL

GNB-25/3R/PRO

GNB-25T/PRO

44000

44050

44052

44058

44059

3/4”

1”

1”

1”

1”

Steel

Steel

Steel

With 1.8 m hose &

metal nozzle

With 1.8 m hose &

metal nozzle

Telescopic

Telescopic

3 pc. Rigid

3 pc. Rigid

Telescopic

PUMP INLET DISCHARGE SPOUT SUCTION TUBEORDERING NR.

Ÿ Most popularly used pump worldwide. The Groz version of the Rotary Pump is superior to any other with features such as Dual Directional Operation which allows the pump to both empty, as well as refill containers

Ÿ Extremely Heavy Duty & rugged weighing 6.6 kgs (14.5 lbs)

Ÿ Pump body is sturdy cast iron with precisely machined cast iron vanes for better draw & smoother delivery

Ÿ Pump seals are made from Hi Nitrile rubber

Ÿ Fits 15 gallons (50 litre) to 55 gallons (205 litre) barrels

Ÿ Comes complete with suction tube , 2” cast iron bung nut & discharge spout

WETTED COMPONENTS Steel, Cast Iron, NBR

RECOMMENDED USE For dispensing Diesel, Kerosene, Heating Oils , Motor Oils, Lubricating Oils (upto SAE 90), and other non-corrosive media

DO NOT USE With water based media, Antifreeze, Solvents, Acids, and Gasoline etc.

Dual Directional Operation:Pumps in either direction by a few reverse turns of the handle

GNB-25Pump inlet threaded 1”

designed for volume discharge of low to

medium viscosity media

Per 20 turns for Diesel Fuel:GNB-20: 2.85 litre ( 0.75 gal.)GNB-25: 5 litre ( 1.30 gal.)

When using with low viscosity media like Diesel, Kerosene etc.,pump should be primed by adding 30 ml of media being pumped or any oil into the pump outlet


CC 68

Key

Best Seller *

**

Rubber boot keeps rainwater and contaminants

away. Available as spare:

R/GNB/DN/01 44092


Variants

GNB-20Pump inlet threaded ¾” designed for use with high viscosity media

GNB-25/3R/PRO

Pump with 1” inlet,

complete with 1.8m

hose and metal nozzle

65

ESP Bomba rotativa - professional FR Pompe à rotation - professionnel DE Aluminiumshåndpumpe

Rotary Barrel Pumps - Professional

Product Features

RB-1


CAT. NR.

RB/1

RB/1H

44030

44031

Steel

1.8 m hose with nozzle,

spring & hose clamp

DISCHARGE SPOUTORDERING NR.

Ÿ Rotary barrel pump with Aluminum Die Cast pump body, heavy duty zinc die cast rotor & vanes

Ÿ Ideal for use in Industrial & Automotive applications

Ÿ Includes a 2” Cast Iron bung adaptor & die cast aluminum handle with security locking latch

Ÿ Complete with a 3 pc threaded suction tube for use on 15 gallons (50 litre) – 55 gallons (205 litre) barrels

WETTED COMPONENTS Aluminum, Zinc, Steel, NBR & PVC nitrile* *only for RB/1H

RECOMMENDED USE Gasoline, Diesel fuel, Kerosene & Lubricating oils upto SAE 90

DO NOT USE With Corrosive liquids, Solvents, Acids, Alkalis etc.

Pump variations available with Viton seal for use with Antifreeze & other reactive media

Note

4 litres (1.05 gal.) / 20 rotations

Fuels containing Ethanol willcause more frequentreplacement of rubber parts

Never operate the pump nearfire or source of spark. Some media may be explosive &dangerous to pump

1.8 m PVC nitriledelivery hose withmetal nozzle, springand hose clamp.Also available as spare

SA/HOS/AA92/A2

44339

Cat. Nr.

Ordering Nr.

RB/1Pump complete with

steel discharge spout

RB/1H

Variants


CC 69

Nozzle Holder

66

ESP Dispensadores de lubricantes FR Pompe de transfert DE Getriebeölpumpen

Oil Lube Dispensers

Product Features

BLP-02 BLP-03 OLP-12 OLP-16

Ÿ Pump designed for transferring transmission differentials & heavier oils

Ÿ Zinc plated pump body with aluminum die cast head & adjusting flange

Ÿ Powder coated steel drum cover

Ÿ Wear resistant brass piston rings fitted onto zinc die cast piston

Ÿ Complete with 48” / 4' fuel resistant soft PVC hose with nozzle for efficient discharge

Ÿ Options available with the pump supplied complete with steel bucket in a choice of 12 & 16 litre capacity

WETTED COMPONENTS Steel, Aluminum, Zinc, Brass, NBR, PVC

RECOMMENDED USE Transmission differentials & heavier oils

DO NOT USE Water based & other corrosive media

Variants


CAT. NR.

BLP/02

BLP/03

OLP/12

OLP/16

44150

44160

44180

44181

25-50 lbs / 5 gal. / 20 litres

120 lbs / 16 gal. / 60 litres

12 litres / 3.17 gal.

16 litres / 4.23 gal.

18” (450 mm)

30” (760 mm)

18” (450 mm)

20-5/8” (524 mm)

12” (310 mm)

15” (381 mm)

8-13/16” (224 mm)

8-13/16” (224 mm)

DRUM CAPACITY PUMP LENGTH DRUM COVER DIA.ORDERING NR.

OLP-12Pump with variable handle setting for convenient use with media of different viscosities. Supplied complete with 12 Litre capacity powder coated steel bucket

OLP-16Pump with variable handle setting for convenient use with media of different viscosities. Supplied complete with 16 Litre capacity powder coated steel bucket

3 Pivot Points for media of different

viscosities

BLP-02

BLP-03

For use with 25-50 lbs / 5 gallons /

20 litre drums

For use with 120 lbs. /

16 gallons / 60 litre drums

For BLP SERIES

For OLP SERIES60 ml (2.14 oz.) / stroke

Upto 125 ml (4.64 oz.) / stoke

Available as spare: 48” Vinyl Hose with

Steel discharge outlet HOSE/48/BLP

. 44340Cat. Nr.

Ordering Nr

Key Best Seller *

*

New


CC 70

67

ESP Bomba para aceite - Mecanismo especial FR Pompe à huile - Mécanisme spécial DE Ölpumpe - Besonderer Mechanismus

Spring Loaded Pump

Product Features

SLP-60

Ÿ An easy to use, highly convenient, single person operation oil pump that dispenses oils with a simple press of the trigger. Single hand operation , requires no continuous lever / rotary pumping action

Ÿ Pump has a spring loaded design that charges the pump for continuous dispensing of media with a single charge. Pump is charged by pressing the pump handle down. Pump handle stays in the pressed position & keeps rising as media is dispensed from the nozzle. A single charge gives 500 ml of output

Ÿ Pump has an all metal construction with built in 2” Male threads into the pump head

Ÿ Pump head incorporates drain back port to minimize wastage & spillage of over flown media

Ÿ Supplied complete with 5' PVC hose fitted with an Oil control gun

Ÿ Designed for use with 60 Litre Drums popular in Australia & Newzealand

WETTED COMPONENTS Steel, Aluminum, Zinc, Brass, NBR, Polypropylene & PVC

RECOMMENDED USE Engine & gear Oils upto SAE 140, Automatic Transmission Fluids



CAT. NR.

SLP/60 44135

ORDERING NR.

Pressing the pump handle

down, charges the pump

2” BungThreads

DrainBack Port

Oil ControlGun

5’ PVCHose


CC 71

68

ESP Bomba de transvase FR Pompe manuelle DE Faßpumpen

Ezee Flo Pumps

Product Features

EZF-1 EZF-2 EZF-9 EZF-10

Ÿ Versatile Hand Lift Pump, engineered for trouble free use on 5 gallon / 20-25 litre containers with plastic pull out (Rieke® spout) or 2” external threads

Ÿ Heavy duty steel suction tube, with the pump head made from high density polyethylene

Ÿ Interchangeable Bung Adaptors. The standard bung adaptors can be slid over the pump, when using on oil containers with external threading. Alternatively, when using the pump on barrels with plastic pull out Rieke® spout, the other bung adaptor for Rieke® spout can be used

Ÿ Pump length can be extended by ¾” (19 mm) for use on high depth containers, by conveniently sliding on a special plastic extension at the suction end

WETTED COMPONENTS Steel, Polyethylene, Derlin, PVC* *Only on pumps supplied with hose

RECOMMENDED USE Engine oils, gear oils, Diesel, 100% Antifreeze and light fuel oil


EZF-2For use with 5 gallon drums. Includes 2 adaptors for use

with plastic pull out (Rieke® spout) or 2” external threads . Pump complete with

48” (1220 mm) discharge hose fitted with curved metal

spout at discharge end

Rieke®Adaptor

StandardBung

AdaptorPump

Extension

1 litre (1 quart) / 15 strokes


CC 72

The Rieke® Adaptorconveniently screwson to the plastic pull-outRieke® Spout


CC 73

Variants

EZF-1For use with 5 gallon drums. Includes 2 adaptors for use with plastic pull out (Rieke® spout) or 2” external threads. Pump complete with rigid steel spout

EZF-10For use with 20 litre Australian drums. Includes 2 adaptors for use Plastic & Metal Drums and an additional adaptor for use with plastic pull out spout (Rieke® spout). Pump complete with 48” (1220 mm) discharge hose fitted with curved metal spout

EZF-10SFor use with 20 litre Australian drums. Includes 2 adaptors for use Plastic & Metal Drums and an additional adapter for use with plastic pull out spout (Rieke® spout) Pump complete with 48” (1220 mm) discharge hose with spring fitted with curved metal spout


CAT. NR.

EZF/1

EZF/1A

EZF/9

44170

44178

44177

EZF/2

EZF/2A

EZF/10

44171

44179

44176

EZF/2S

EZF/10S

44168

44169

5 gallons

20-25 litres

20 litres

5 gallons

20-25 litres

20 litres

5 gallons

20 litres

15-3/8” (390 mm)

15-3/8” (390 mm)

325 mm

Y

Y

Y

Y

Y

Y

North America

United Kingdom

Australia & Newzealand

Y

Y Y

Y

15-3/8” (390 mm)

15-3/8” (390 mm)

325 mm

Y

Y

Y

Y

Y

Y

North America

United Kingdom


Y

Y Y

Y

15-3/8” (390 mm)

325 mm

Y

Y

Y

Y

North America


Y

Y Y

DRUM CAPACITY

PUMP LENGTH

POPULARIN

ADAPTORS & ACCESSORIES

ORDERING NR.

Key Best Seller *

*

*

New

With Rigid Steel Spout

With 48” Flexible Hose & Spout

With 48” Flexible Hose with Spring & Metal Spout

Rieke® Adaptor

(Red)

2” Standard

Bung Adaptor

(Red)

Coarse ButtressThread Adaptor(Green)

ButtressThread

Adaptor forPlastic Drums

(Blue)

KnuckleThread

Adaptor forMetal Drums

(Black)

PumpExtension

69

ESP Accesorio para Bomba de barril FR L'accessoire pour pompe de baril DE Zubehörteil für Fasspumpe

Drip Pans

Product Features

Ÿ A must have accessory with every drum pump; the Drip Pan fits into any 2” threaded opening on a Drum, barrel or tank

Ÿ Used as a drain for returning over flown media back to the drum

Ÿ It additionally works as a base for holding a container during dispensing

Ÿ Keeps work place clean & eliminates wastage, saving money each time the pump is used

Ÿ Designed with a Built-In 2” Bung Adaptor & strainer for draining clean media back into the drum

Ÿ Available in 2 styles

Cast Iron Body Designed for use with pumps with a Suction Tube diameter equal or less than 1.32” (33.5 mm)

Cast Aluminum Body with 2” External & Internal threads. Design allows any pump with a 2” bung to fit onto the Drip Pan


CAT. NR.

DP/GNB/25

DP/AL/2

44075

44076

Cast Iron Body

Cast Aluminium Body

ORDERING NR. CONSTRUCTION

Strainer

2” Internalthreads

2” Bung Adaptor

7” (175 mm)

7” (1

75 m

m)

DP/AL/2With

Auminium Body

DP/GNB/25With

Cast Iron Body


CC 74

70

ESP Accessories para bombas FR Écrous de bondonnage DE Pumpen accessoires

Bung Nuts

Product Features

Ÿ Cast iron bung nuts / adaptors for use on standard 2” barrels

Ÿ Plated spindle with tommy bar to firmly hold suction tube


CAT. NR.

GNB/DN-34

GNB/DN-01

GNB/DN-02

GNB/DN-02/SLV

BN/RBP/3V

BN/RBP/3V/F

44380

44381

44382

44383

44384

44388

Red

Red

Red

Silver Grey

Black

Black with

Flame Arrestor

1.09” (27.5 mm)

1.27” (32.5 mm)

1.5” (38 mm)

1.5” (38 mm)

1” (26 mm)

1” (26 mm)

GNB-20

GNB-25

LLP, VLP

RB-1, RB-3

RBV/3V

RBV/3V (FM Approved

Pumps)

ORDERING NR.COLOR/

DESCRIPTIONSUITABLE FOR SUCTION TUBES WITH DIA. UPTO

FOR USE WITHGROZ PUMP SERIES

71

ESP Accessories para bombas FR Tube de succion DE Tauchtiefe

Suction Tubes

Product Features

Ÿ Suction tubes, for use with all types of oil pumps

Ÿ Available in telescopic or Rigid style


CC 75


CAT. NR.

GNB/TP-34

GNB/TP/3-4F/N

LBP/TP-34

LBP/TP-34/NR

LBP/TP/3-4/PVC

PLP/TP/3-4

GNB/TP-01

LBP/TP/1-20/NR

A2/TP/1-20

A2/TP/SPL/1-20V

EBP/2R/01

GNB/3R/01

FPM/2R/1/N

PRP/3R

44300

44305

44302

44304

44306

44307

44301

44308

44309

44310

44311

44303

44312

44313

23.3/4” to 39.3/4”

(605 mm to 1012 mm)

24.2” to 40.4”

(615 mm to 1026 mm)

18.5/16” - 34.7/16”

(465 mm to 875 mm)

19.3/8” - 34.27/32”

(492 mm) to 885 mm)

19.5/16” to 35-5/8”

(490 mm to 905 mm)

13-3/4” (350 mm),

25.4” (645 mm),

39.37” (1000 mm)

23.3/4” to 40.1/8”

(604 mm to 1020 mm)

19-1/2” to 34.84”

(495 mm to 885 mm)

13.19” to 26”

(335 mm to 660 mm)

17.7” to 34.84”

(450 mm to 885 mm)

17-1/2” to

(445 mm to 895 mm)

13.3/4” (350 mm),

26.3/8” (670 mm) &

39.3/8” (1000 mm)

17” to 34”

(430 mm to 863 mm)

16.73” (425 mm),

31.10” (790 mm) &

45.28” (1150 mm)

35.24”

3/4” BSPT (M)

3/4” NPT (M)

3/4” NPT (M)

3/4” NPT (M)

3/4” NPT (M)

3/4” PF (M)

1” BSPT (M)

1”-20 UNEF (M)

1”-20 UNEF (M)

1”-20 UNEF (M)

31/32 - 20 UNF (M)

1” BSPT (M)

1” NPT (M)

Special

Non

Std.

GNB-20

RBP-3V

LBP-04, LBP-06, LBP-96

QSP-01, DPP-1

LBP-04, LBP-06, LBP-96

PLP-02

GNB-25

ORP-51

A2

LBP-85

EBP-01

GNB-25, RB-1,

RB-3

FPM, OPM

PRP, ERP

Telescopic

Telescopic with

Filter Screen at Inlet

Telescopic

Telescopic with Non

Return Valve at Inlet

Telescopic

Telescopic

Telescopic

Telescopic with Non

Return Valve at Inlet

Telescopic

Telescopic

2 pc Rigid Pipe

3 pc Rigid Pipe

2 pc Rigid Pipe

3 pc Rigid Pipe

Steel

Steel

Steel

Steel

PVC

Polypropylene &

Polyethylene

Steel

Steel

Steel

Steel

PVC

Steel

PVC

Polypropylene

Nitrile Rubber

Nitrile Rubber

Nitrile Rubber

Nitrile Rubber

Nitrile Rubber

Viton

Nitrile Rubber

Nitrile Rubber

Nitrile Rubber

Viton

-

-

-

-

DESCRIPTION TUBE MATERIAL SEAL THREADSFOR USE WITH

GROZ PUMP SERIESORDERING NR. LENGTH

Telescopic

Rigid

GNB/3R/01

LBP/TP-34

GNB/TP-01

72

ESP Bombas de aceite pneumatika FR Pompe pneumatique de distribution déhuile DE Pneumatik-Olpumpe

Air Operated Oil Ratio Pumps

Product Features

Variants - 1:1 Pumps

Ÿ World-class Industrial Oil Dispensing pumps with guaranteed performance & hassle free operation

Ÿ Pumps are designed to work in tough conditions & are ideal for use in Industry, workshop, farm , construction or as part of the Mobile Oil system

Ÿ All metal construction, fully CNC machined with hardened wear resistant moving parts

Ÿ Reciprocating piston operated 2-1/2” (63 mm) dia. Air Motor

Ÿ Stub Pumps are supplied with Non Return Valve threaded 1” (F) for use on the bottom of the Suction Tube. Other pump lengths have a built in Strainer at pump inlet to keep contaminants away

WETTED COMPONENTS Steel, Brass, Aluminum, hi nitrile rubber, Polyurethane, Turcite* & Nylon** *Only on 3:1 & 5:1 pumps ** Only on 1:1 pumps

Ÿ Transfer pump, used to quickly transfer oils from large drums to smaller containers. These have a Double Acting operation with discharge upto 40 LPM (10.58 GPM).

Ÿ Ideal for use with low to medium viscosity (upto SAE 80 Oils) for transferring over short distances (5 metres)

Ÿ Air Consumption: 270 LPM (71.5 GPM)

Ÿ 1:1 pump is also available complete with Oil bar tap & connecting links (ODS series), used as an Air Operated Oil Dispenser to quickly & conveniently dispense Oils from Drums.

OP-11 OP-31 OP-51 ODS-11

Pump SpecificationsWorking PressureMax. Air PressureAir Inlet ConnectionPump Outlet ConnectionPump Inlet on Stub Pumps onlyNoise Level

2 - 10 BAR (30 - 150 PSI)10 BAR (150 PSI)¼” BSP (F) / ¼” NPT (F)½” BSP (F) / ½” NPT (F)1” BSP (F) / 1” NPT (F)81 db


CAT. NR.

BSP Threads NPT Threads

CAT. NR.

OP/S/11B/BSP

OP/T2/11B/BSP

OP/T3/11B/BSP

ODS/T3/11B/BSP

45322

45332

45342

45355

45323

45333

45343

45356

OP/S/11B/N

OP/T2/11B/N

OP/T3/11B/N

ODS/T3/11B/N

Stub Pump with Bung Adaptor

Pump complete with Suction Tube for 16 gal

(50-60 litre) drums & bung adaptor


(205 litre) drums & bung adaptor

Pump complete with Suction Tube for 55 gal (205 litre)

drums, bung adaptor & Oil Bar Tap & fittings

ORDERING NR. ORDERING NR. DESCRIPTION


CC 76

Key

Best Seller *

* *

Upto 40 LPM ( 10.5 GPM )

Pump must be supplied with clean & dry compressed air via an FRL unit

ODS/T3/11B/BSP

DOUBLEACTING

OP/S/11B/BSP



Ÿ Amongst the most popular general purpose air operated pumps worldwide

Ÿ Pumps are single acting with discharge upto 14 LPM (3.70 GPM)

Ÿ Ideal for use with medium to high viscosity oils (upto SAE 130) for transferring over short distances ( upto 30 metres), mostly used with Trolley mounted kits

Ÿ Air Consumption: 230 LPM (61 GPM)

Ÿ High Pressure air operated pumps for dispensing oil at 5 times the pressure as the air inlet

Ÿ Pumps are double acting with discharge upto 18 LPM (4.76 GPM)

Ÿ Ideal for use with high viscosity oils (upto SAE 240) for transferring over short & long distances (upto 50 metres), mostly used with Trolley mounted kits both with & without Hose Reels, as well as with fixed systems for centralized distribution

Ÿ Air Consumption: 250 LPM (66 GPM)



CAT. NR.

CAT. NR.

BSP Threads

BSP Threads

NPT Threads

NPT Threads

CAT. NR.

CAT. NR.

OP/S/31B/BSP

OP/T2/31B/BSP

OP/T3/31B/BSP

OP/S/51B/BSP

OP/T2/51B/BSP

OP/T3/51B/BSP

45320

45330

45340

45324

45334

45344

45321

45331

45341

45325

45335

45345

OP/S/31B/N

OP/T2/31B/N

OP/T3/31B/N

OP/S/51B/N

OP/T2/51B/N

OP/T3/51B/N











ORDERING NR.

ORDERING NR.

ORDERING NR.

ORDERING NR.

DESCRIPTION

DESCRIPTION

Upto 18 LPM (4.76 GPM)

Upto 14 LPM (3.70 GPM)


CC 77

Key Best Seller

Key

Best Seller

**

*

*

** *

*

OP/T3/31B/N

OP/S/51B/N

DOUBLEACTING

73

ESP Bombas de aceite alta precisón - ratio 5:1 FR Pompe pneumatique de distribution d’huile - rapport 5:1 DE Pneumatik-Olpumpe

5:1 Composite Air Operated Oil Pump

Product Features

ORP-51

Ÿ Compact Air operated 5:1 Ratio pump for dispensing Oils upto 5 times the pressure as the Air Inlet

Ÿ Double Acting Operation with discharge upto 15 LPM (4 GPM)

Ÿ Operates off most small compressors with size as small as 0.08 cubic meter / minute (3 cfm)

Ÿ Commonly used in workshops, farm, construction machinery or as a part of a Mobile oil system

Ÿ Reciprocating piston operated 72 mm (2.83” )dia. Air Motor

Ÿ Non corroding air motor design (composite construction) allows the pump to be used without an air line lubricator

Ÿ Built-In pressure Relief valve prevents both the pump & system against damage created by excessive pressure due to thermal expansion

Ÿ Stub pump design with dual oil inlet threads 1” NPT (F) & 1” UNEF (F), allowing the user to make his own suction tube for any drum / tank depth

Ÿ Ideal for use over long distances upto 50 metres

Ÿ Comes complete with 2” Bung nut to fit directly onto Oil barrels

WETTED COMPONENTS Aluminum, Zinc, Steel, Brass, nitrile & polyurethane rubber

RECOMMENDED USE For use with Oils to SAE 140 viscosity, ATF, Diesel, Kerosene, and Soft Self Collapsing Grease

Air Inlet1/4” NPT (F)

Oil Outlet1/2” NPT (F)

Pump SpecificationsAir Inlet Connection


Working Pressure


Air Consumption

Discharge

Maximum Viscosity of Oil

Noize Level

1/4” NPT (Female)

1/2” NPT (Female)

60-150 PSI (4-10 BAR)

150 PSI (10 BAR)

270 lt/min (72 GPM)

15 LPM (4 GPM)

140 SAE

85 db


CAT. NR.

ORP/51/N

ORP/51T/N

45310

45311

Stub Pump Only

Pump complete with

1” Telescopic Suction Tube

1/2” NPT (F)

1/2” NPT (F)

ORDERING NR. DESCRIPTION OIL OUTLET

Pump must be supplied withclean & dry compressed airvia an FR unit

Key Best Seller *

*


CC 78

74

ESP Bombas Electricas de Aceite FR Pompe electrique de transfert D'Huile DE Elektro Ölpumpe

Electric Oil Pump

Product Features

OPM

Ÿ Heavy Duty Oil pump designed specifically to transfer bulk oils, hydraulic fluid, antifreeze or antifreeze mixes

Ÿ Non corroding Aluminum Die cast pump body

Ÿ A high horsepower to flow ratio assures adequate power to pump viscous fluids at low temperatures

Ÿ Sintered Powder Metal Gears

Ÿ Self priming, positive displacement design

Ÿ Pump has an internal bypass valve to bypass flow, if the discharge pressure exceeds the bypass valve setting

Ÿ Built-In 2” Bung Adaptor for mounting on drums/ tanks

Ÿ Air Cooled Motor with Thermal Protection

Ÿ Can be used to transfer used oil with a screen fitted onto the Suction Tube

Ÿ UL listed frame & motor components

WETTED COMPONENTS Aluminum, Steel, Cast Iron, Nylon, NBR, Zinc, Polypropylene, PVC

RECOMMENDED USE Oils, Synthetic Oils, Antifreeze, Used Oil, Hydraulic Fluids, Cutting Oils, Oil based Herbicides, Non Flammable Oil Based Solvents, Liquid Soap etc.

Pump Specifications

Description

Flow

Motor

Amp

RPM

Construction - pump housing

Mechanism

Gear Material

Internal bypass valve

Suction Pipe

Hose

Bung Adaptor

Inlet

Outlet

Dispensing Nozzle

Power Cable

Air Cooled

Max. Viscosity of Oil

Max. Working Pressure

Thermal Protection

Heavy Duty 115V AC

4 GPM (15.10 LPM)

1/2 HP 115V AC, 60 Hz.

9 Amp

1720

Aluminum Die Cast

Gear Pump

Sintered Powder Metal

Yes

34” long PVC

3/4” x 8’

2” Threaded

1” NPT

3/4” NPT

Ball Valve

30” (762 mm)

Yes

SAE 90

65 PSI (4.5 BAR)

Yes

Heavy Duty 220V AC

3 GPM (11.3 LPM)

1/2 HP 220V AC, 50 Hz.

6 Amp

1440

Aluminum Die Cast

Gear Pump

Sintered Powder Metal

Yes

34” long PVC

3/4” x 8’

2” Threaded

1” NPT

3/4” NPT

Ball Valve

30” (762 mm)

Yes

SAE 90

65 PSI (4.5 BAR)

Yes

OPM-115 OPM-220

FLOW

Upto 4 GPM (15.1 LPM)


CC 79

Lift Handle

8’ x 3/4”Rubber Hose

2 pc threadedSuction Tube

Power Cable30” (762 mm) long

On/OffSwitch

Convenient SpinCollar for easy

installation


CAT. NR. ORDERING NR. POWER SUPPLY

OPM-115OPM-220

4555045551

115 V AC220 V AC

75

ESP Pistola de control con Contador para Aceite FR Pistolet a Compteur Mecanique de Distribution D'Huile DE Ölsteuergewehr

Oil Control Gun

Product Features

OGY

Ÿ For use with Air Operated Oil Pumps upto 6:1 Pressure Ratio

Ÿ Gun dispenses by simple press of the trigger

Ÿ Built-In Safety cum continuous Flow Lever can be slid over the Trigger for continuous unattended dispensing; or alternatively under the Trigger to lock & prevent accidental dispensing of oils

Ÿ Slim construction of the outlet steel spout allows the gun to be used to fill small openings

Ÿ Includes swivel at gun inlet

WETTED COMPONENTS Steel , PA6 (Nylon), Stainless Steel & Viton

RECOMMENDED USE Oil , Gear Lube , ATF


CAT. NR. ORDERING NR. THREADS

Gun SpecificationsIn - Line Swivel

Outlet Diameter of Spout

Max. Inlet Pressure

Max. Flow Rate

Max. Temperature

1/2” (F)

1/2” (12.7 mm)

870 PSI ( 60 BAR)

70 LPM (18.5 GPM)

60°C (140° F)

Gun Hanger

Outlet Dia.of Spout

1/2” (12.7 mm)

Nylon Body

Safety cum Continuous Flow LeverTrigger

Swivel at inletthreaded 1/2” (F)

OGY/S/1-2F/BOGY/S/1-2F/N

4571545716

1/2” BSPT (F)1/2”NPT (F)


CC 80

Max. Pressure870 PSI(60 BAR)

76

ESP Pistola de control con Contador para Aceite & metro FR Pistolet a Compteur Mecanique de Distribution D'Huile & mètre

DE Ölsteuergewehr & Messinstrument

Oil Control Gun with Mechanical Meter

Product Features

HG-40

Ÿ Heavy Duty Oil Control Gun with Mechanical Register

Ÿ Robust shock resistant design with Aluminum die cast body & a soft shroud encasing the meter

Ÿ Single reset button used to reset 4 digit reset batch totalizer (max. 999.9 Litre / Gallon)

Ÿ 6 Digit Accumulative Totalizer (max. 9,99,999 litre/gallon)

Ÿ Works on oval gear technology for highest accuracy (+/- 1 %) & repeatability

Ÿ 2 Outlet positions for In-line & 90° dispensing

Ÿ Swivel with strainer built at the gun inlet

Ÿ Supplied complete with rigid steel extension fitted with Automatic Non Drip nozzle

Ÿ Available in Litre / Gallon version

RECOMMENDED USE Engine Oil, Diesel Oil, ATF, Antifreeze, Anti-Boil & other Oils upto SAE 140

WETTED COMPONENTS Aluminum, Acetal, Steel , Nitrile rubber

Not to be used to measure media for resaleNote

Gun SpecificationsFlow Range

Maximum Pressure

Operating Temperature

Inlet

1 to 30 LPM (0.26 - 8 GPM)

1500 PSI (100 BAR)

0 - 50° C (32 - 122° F)

1/2” BSPT (F) / 1/2” NPT (F)


CAT. NR. ORDERING NR. INLET THREADS UNIT OF MEASURE

HG/40R/BHG/40R/NHG40G-R/M

457004570145702

1/2” BSPT (F)1/2” NPT (F)1/2” NPT (F)

LitresLitresGallons

Max. Pressure1,500 PSI(100 BAR)


CC 81

77

ESP Pistola de control con Contador para Aceite -Accesorios FR Pistolet a Compteur Mecanique de Distribution D'Huile - Accessoires

DE Ölsteuergewehr Zusätze

Oil Control Gun Accessories

Ÿ Swivel Adaptor for Oil Meters / Hose End Guns

Ÿ Large ½” (13 mm) inner dia. for least resistance to flow

Ÿ Steel construction with bright zinc plated finish

Ÿ Threaded ½” (M) x ½” (F)

OIL METER SWIVEL

1,500 PSI(103 BAR)



CAT. NR.

CAT. NR.



SWV/1-2M/1-2F/BSWV/1-2M/1-2F/N

NDN/01/16M/M

NDN/02/1-4F/BNDN/02/3-8F/BNDN/02/1-4F/N

NDN/03/1-4M/BNDN/03/1-4F/N

Non Drip Tip

Automatic Non Drip Nozzles

Manual Non Drip Nozzles4389143890

1/2” BSPT1/2” NPT

45000

450104501145012

4503045034

M16 X 1 (M)

1/4” BSPT (F)3/8” BSPT (F)1/4” NPT (F)

1/4” BSPT (M)1/4” NPT (F)

Ÿ Commoly used with metered oil control valves / hose end guns

Ÿ Used either with steel extensions or hoses at discharge end to cut off media supply, once filling is complete

Ÿ These have a steel construction, using NBR seals

Ÿ Available in 3 model types, in varying thread specifications. Spl. thread sizes can be made on request.

NON DRIP NOZZLES

NDN-02Automatic Non Drip Nozzle, designed with multiple check valves to achieve absolute non drip. The nozzle opens automatically under fluid pressure; and closes automatically with the release of pressure. The discharge end has a narrow section allowing the nozzle to dispense into small openings. Designed to minimize pressure loss

NDN-01Non Drip Tips with a tapered construction with simple spring loaded mechanism. The nozzle opens automatically under fluid pressure; and closes automatically with the release of pressure

Key Best Seller **

Oil Meter Swivelfitted on to Oil Control Gun


CC 82

NDN-03Manual Non Drip Nozzle can be operated by manually rotating the body. Both opening & closing of the nozzle are manual

Ÿ All Steel Wall mounting Bracket for installing Stub Pumps

Ÿ Bracket has a Bung welded at the centre threaded 2” (F)

Ÿ Powder coated finish

MOUNTING BRACKET


CAT. NR.

BKT/S/RP 45395 4-3/4” (120 mm) 6” (150 mm) 6” (150 mm)

ORDERING NR. LENGTH WIDTH HEIGHT

Length

Width

Hei

ght

BUNG NUTS

Ÿ Aluminum Die cast 2” Drum Bungs for use primarily with Air Operated Pumps

Ÿ Bungs can be adjusted anywhere on the suction tube & tightened using the Wing Nut

Ÿ Zinc Die cast Locking Nut inside holds the suction tube

Ÿ Available in a choice of sizes for use on suction tubes of varying diameters


CAT. NR.

BUNG/OP/30

BUNG/OP/36

BUNG/OP/42*

45396

45397

45398

30 mm

36 mm

42 mm

ORDERING NR. INSIDE DIA.

* standard on all Groz Air Operated OP Series Oil Pumps

FOOT VALVE

Ÿ Used at the bottom of the Suction tube as a non return valve , these help in retaining prime

Ÿ Machined Aluminum construction with a steel non return ball

Ÿ Available in a choice of ¾” (F) or 1” (F) threads


CAT. NR.

FV/3-4F/N

FV/0-1F/N

FV/3-4F/BSP

FV/0-1F/BSP

45390

45391

45392

45393

3/4” NPT (F)

1” NPT (F)

3/4” BSP (F)

1” BSP (F)


HYDRAULIC HOSES

Ÿ Hydraulic Rubber Hoses for use with Air Operated Oil Pumps

Ÿ Hose Exceeds SAE 100 R1 specification with a Working Pressure of 2200 PSI ( 150 BAR)

Ÿ I.D.: ½” , O.D. : 7/8”

Ÿ Hydraulically crimped with steel fittings with ½” (M) threads on both ends & available in lengths of 1.5 m , 2.5 m & 3.5 m


CAT. NR.

HH/1.5/1-2M/1-2M/BSP

HH/2.5/1-2M/1-2M/BSP

HH/3.5/1-2M/1-2M/BSP

HH/1.5/1-2M/1-2M/N

HH/2.5/1-2M/1-2M/N

HH/3.5/1-2M/1-2M/N

45380

45381

45382

45385

45386

45387

1.5 m

2.5 m

3.5 m

1.5 m

2.5 m

3.5 m

1/2” BSP (M)

1/2” BSP (M)

1/2” BSP (M)

1/2” NPT (M)

1/2” NPT (M)

1/2” NPT (M)

ORDERING NR. LENGTH THREADS

78 Air Operated Oil Pump AccessoriesESP Bombas de aceite pneumatika FR Pompe pneumatique de distribution déhuile DE Pneumatik-Olpumpe


CC 83

FV/3-4 FV/0-1

79

ESP Grifo para bar aceite a doble válvula FR Robinet pour bar à double vanne, muni d’un filtre brise-lames

DE Zapfhahm für Ölbar mit Doppelventil und Siebeinsatz für einen starken

Oil Spigots

Ÿ Professional quality Oil Spigot in premium chrome plated finish

Ÿ Used to construct oil bars or direct with air operated oil pumps as a dispenser

Ÿ Spring loaded dispensing mechanism CNC machined for non-drip operation

Ÿ Available with Nitrile seals for use with oil or Viton seals for use with Antifreeze

Ÿ Other thread sizes can be custom built

WETTED COMPONENTS Steel, Aluminum ,Hi Nitrile rubber / Viton


CAT. NR.

OBT/01

OBT/02

OBT/01V

OBT/02V

44350

44351

44352

44353

Nitrile

Nitrile

Viton

Viton

ORDERING NR. SEALS

8,00 PSI55 BAR

OBT-01With wall mountattachment. Threaded3/4”-14 BSP (M)

OBT-02Without wall mountattachment. Threaded1/2” BSP (F)

Product Features


CC 84

Key New

8081

ESP Inyectores de lubricante

ESP Injectores dobe effecto

FR Pistolet de succion

FR Pomp de transfert

DE Saig - und Druckspritzen

DE Pafuldningspumpe

Suction Guns

Transfer Gun

Product Features

Product Features

SG-10

SG-20

Ÿ A rugged transfer gun designed for use with gear oils to get them both into and out of gear boxes, transfer cases and differentials

Ÿ Deluxe lip seal provides maximum suction

Ÿ Steel Barrel in premium powder coated finish

Ÿ Fully serviceable

Ÿ Needs no priming

Ÿ Suitable for use with non corrosive liquids

Ÿ Capacity: 500 ml (16 oz.)

Ÿ Dual Direction Transfer Gun: It draws in & pumps out liquid in a single stroke

Ÿ Easy & safe answer to fluid transfer, especially useful in transferring media unsafe for body contact

Ÿ Gun body is non-denting & is made from heavy aluminum section. Suction Head & piston have an aluminum construction & use Viton piston rings

Ÿ The gun comes complete with 8' of vinyl hose (4' with each valve)

WETTED COMPONENTS Aluminum, Brass, Viton , PVC

RECOMMENDED USE Fuel oils, Mineral oils, Synthetic & Biological oils, Petrol, Cooling liquids, Water, Antifreeze, Spirits & Brake fluids

SG-11

SG-10Aluminum Die Cast Head

SG-11Plated Steel Head

Complete with 12” (300 mm) flexible Vinyl Hose

Also available as spare: HOSE/SG/10/12

44342Cat Nr.Ordering Nr.


CAT. NR.

SG/10-BL

SG/11-BL

45200

45205

ORDERING NR.

Key Best Seller **

Complete with 8’ of Vinyl Hose(4’ with each valve). Also

available as spare: HOSE/SG/20/96

44343Cat. Nr.

Ordering Nr.


CAT. NR.

SG/20 45250 350 ml (12 oz.)

ORDERING NR. CAPACITY


CC 85

82

ESP Aceiteras FR Huilier à poignée DE Metal-Öler

Oil Cans

PT Series OC Series

Product Features

Ÿ Complete range of oil dispensing cans in a range of sizes from 125 ml to 1 litre (4 oz. to 1 quart)

Ÿ All steel construction, with the body seamless drawn from tin coated sheet in premium powder coated finish

Ÿ Metal pump has 2 ball valves for large volume delivery per stroke. The suction valve at the bottom of pump is without spring, which prevents malfunctioning because of sticking valve due to resinous oil

PT SeriesThe PT series Oil cans have a modern & contemporary design with a dome shaped body. These are the most popularly used Oil Can style all over the world & are available in both Lever Style & Pistol Style. Both oil can types are manufactured with steel pump – powder coated Red - as well as with the deluxe brass pump – powder coated Blue. Oil cans can be supplied with rigid steel, wire braided flexible or both extensions


CAT. NR.

Rigid Spout

PT Series - Lever Type - Steel Pump

PT Series - Lever Type - Brass Pump

PT Series - Pistol Grip

Steel Pump

Brass Pump

MP21R

MP22R

MP22/4R

MP23R

MP24R

MP25R

MP21RB

MP22RB

MP22/4RB

MP23RB

MP24RB

MP25RB

M10R

M15R

M15R/BS

with base

M40R

M10RB

M15RB

M15RB/BS

with base

M40RB

41410

41411

41412

41413

41414

41415

41610

41611

41612

41613

41614

41615

42220

42221

42222

42223

42240

42241

42242

42243

41420

41421

41422

41423

41424

41425

41620

41621

41622

41623

41624

41625

42225

42226

42227

42228

42245

42246

42247

42248

41430

41431

41432

41433

41434

41435

41630

41631

41632

41633

41634

41635

42230

42231

42232

42233

42250

42251

42252

42253

200 ml / 6 oz.

300 ml / 10 oz.

400 ml / 13 oz.

500 ml / 16 oz / 1 pint

700 ml / 23 oz.

1000 ml / 1 quart

200 ml / 6 oz.

300 ml / 10 oz.

400 ml / 13 oz.

500 ml / 16 oz / 1 pint

700 ml / 23 oz.

1000ml / 1 quart

125 ml / 4 oz.

180 ml / 6 oz.

180 ml / 6 oz.

500 ml / 16 oz. / 1pint

125 ml / 4 oz.

180 ml / 6 oz.

180 ml / 6 oz.

500 ml / 16 oz. / 1pint

5” (125 mm)

5” (125 mm)

6” (150 mm)

6” (150 mm)

7” (175 mm)

8” (200 mm)

5” (125 mm)

5” (125 mm)

6” (150 mm)

6” (150 mm)

7” (175 mm)

8” (200 mm)

4” (100 mm)

4” (100 mm)

4” (100 mm)

6” (150 mm)

4” (100 mm)

4” (100 mm)

4” (100 mm)

6” (150 mm)

6” (150 mm)

6” (150 mm)

7” (175 mm)

7” (175 mm)

8” (200 mm)

9” 225 mm)

6” (150 mm)

6” (150 mm)

7” (175 mm)

7” (175 mm)

8” (200 mm)

9” (225 mm)

5” (125 mm)

5” (125 mm)

5” (125 mm)

7” (175 mm)

5” (125 mm)

5” (125 mm)

5” (125 mm)

7” (175 mm)

MP21F

MP22F

MP22/4F

MP23F

MP24F

MP25F

MP21FB

MP22FB

MP22/4FB

MP23FB

MP24FB

MP25FB

M10F

M15F

M15F/BS

with base

M40F

M10FB

M15FB

M15FB/BS

with base

M40FB

MP21R/F

MP22R/F

MP22/4R/F

MP23R/F

MP24R/F

MP25R/F

MP21R/FB

MP22R/FB

MP22/4R/FB

MP23R/FB

MP24R/FB

MP25R/FB

M10R/F

M15R/F

M15R/F/BS

with base

M40R/F

M10RB/F

M15RB/F

M15RB/F/BS

with base

M40RB/F

Flexible Spout Rigid & Flexible Spout

CAT. NR. CAT. NR. CAPACITY SPOUT LENGTH

FlexibleRigid


M15R/BS

M10FB


CC 86

Ordering Information: OC Series

CAT. NR.

Lever Type with 30° angled rigid spout

Pistol Type with Rigid spout

OC-1/R30

OC-2/R30

OC-15/BS/R

OC-40/R

41810

41811

41820

41821

41815

41816

41825

41826

500 ml / 1 pint

1000 ml / 1 quart

180 ml / 6 oz.

500 ml / 1 pint

9” (225 mm)

9” (225 mm)

6” (150 mm)

6” (150 mm)

9” (225 mm)

9” (225 mm)

6” (150 mm)

6” (150 mm)

OC-1/F

OC-2/F

OC-15/BS/F

OC-40/F

Lever Type with flexible spout

Pistol Type with flexible spout

CAT. NR. CAPACITY SPOUT LENGTH

FlexibleRigid


OC SeriesThe OC series Oil cans have a more traditional design. These are designed for large hands & are popular in North America. These are available in both Lever Style & Pistol Style & have a steel pump construction - powder coated Black. Lever style Oil Cans come with a choice of rigid steel spouts with 30° bent or wire braided flexible spouts. Pistol style are supplied with either rigid steel or wire braided flexible extension

MP23R

MP21FB

OC-15/BS/F

OC-1/R30

OC-40/R


CC 87

8384

ESP Aceiteras - especial

ESP Boca flexible, Rigido

FR Huilier - Special

FR Bec flexible, Fixe

DE Plastik-oliesprayflasker

DE Spritzrohr, starr & superflex

Speciality Oil Cans

Flexible & Rigid Spouts

SQZ-01 & SQZ-02Unbreakable & rust resistant Plastic body Oil Cans with graduations marked on the bottle in both ml & oz. Oil discharge is through the “squeeze-action” of the Oil can bottle. Comes complete with telescopic steel tube with brass nut & non drip tip

SNP-OCA traditional Oil can used in garages, with machinery & home for general purpose lubrication. Oil discharge is through the “snap-action” of the oil can base. Comes complete with 5” (125 ml) steel spout


CAT. NR. ORDERING NR. CAPACITY SPOUT LENGTH

SNP/0C

SQZ/01SQZ/02

Snap Bottom - Bench Oil Can

Squeez-It-Plastic Oil Can

41800 350 ml (12 oz.) 5” (125 mm)

4180141802

215 ml (8 oz.)215 ml (8 oz.)

9” (230 mm)6” (150 mm)

Product Features

Ÿ Oil can discharge spouts - rigid or flexible are fully interchangeable and available as spares in different lengths

Ÿ Spouts are threaded ¼” UNEF X 32 TPI


CAT. NR.

Flexible Spouts

Rigid Spouts

FS-5

FS-6

FS-7

FS-8

FS-9

RS-4

RS-5

RS-6

RS-7

RS-9

41205

41206

41207

41208

41209

41224

41225

41226

41227

41229

125

150

175

200

225

100

125

150

175

225

5

6

7

8

9

4

5

6

7

9

LENGTH (END TO END)

Inch mmORDERING NR.

FSWire braided PVC construction, with solid brass ends. The ends are male threaded & can be easily screwed onto the female threaded spout on the oil can. These are especially useful for oiling hard to reach areas

RSRigid spouts are made from zinc plated steel, with a slight bent at the discharge end. The ends are male threaded and can be easily screwed onto the female threaded spout on the oil can

Key

New


CC 88

85

ESP Recipiente Medidor FR Brocs Plastques Gradues DE Meßbecher

Flexible Spout Measures

Product Features

Ÿ Plastic Measures have a translucent High Density Polyethylene construction & are used for transferring metered qty. of fluids

Ÿ These are marked in both Litres & Quarts

Ÿ Comes complete with Polyethylene flexible spout with cap and polypropylene lid

Ÿ Other color options can be custom built

Ÿ Flexible spouts available as spare

Measures must not be used to measure media for sale

Note


CAT. NR. ORDERING NR. CAPACITY

MSR/P/F-1MSR/P/F-2MSR/P/F-3MSR/P/F-5

41900419014190241903

1 litre (1 quart)2 litre (2 quart)3 litre (3 quart)5 litre (5 quart)

Key Best Seller **

*


CC 89

86

ESP Embudo FR Entonnoir DE Trichter

Spill Proof Plastic Funnels

FNL-8 FNL-9

Product Features

Ÿ Heavy Duty Polypropylene construction

Ÿ Designed with special contours in the funnel body for easy handling

Ÿ Anti-Splash & Spill Proof, with rim of the funnel curved in

Ÿ Complete with Wire Mesh Screen, Dust Cover & flexible spout

Ÿ Available in 2 sizes. The larger size is available both with and without drum Bung Attachment, which allows the funnel to be mounted direct onto drums with 2” threaded opening

Ÿ Manufactured in Translucent white to give a clear view of media

Ÿ Other color options can be custom built on request


CAT. NR. ORDERING NR. CAPACITY MAJOR DIA. SPOUT LENGTH

FNL/8FNL/9FNL/9B

419204192141922

1.7 litre (1.7 quart)3 litre (3 quart)3 litre (3 quart)

8” (205 mm)9-1/2” (240 mm)9-1/2” (240 mm)

6-11/16” (170 mm)9-5/8” (245 mm)9-5/8” (245 mm)

Variants

FNL/9BCapacity: 3.0 Litre (3 QT.)Dia: 9-1/2” (240 mm)

Connects directly to drums with 2” opening

FNL-8Capacity: 1.7 Litre ( 1.7 QT.)Dia: 8” (205 mm)

FNL-9Capacity: 3.0 Litre (3 QT.)Dia: 9-1/2” (240 mm)

Wire mesh screen keepscontaminants out

Curved Funnel Ends make it splash proof

Spill proof Funnel design

Drum Bung attachment

Flexible Spout

Dust Cap


CC 90

Key Best Seller **

*

Industrial Rotary Fuel Pumps / 92

Rotary Booster Pump 3:1 / 94

Double Diaphragm Fuel Transfer Pump / 95

Heavy Duty Electric Fuel Pumps / 96

Fuel Filter / 98

Fuel Control Nozzles / 99

Fuel Meter / 100

Lever Action Bio Diesel & E 85 Pump / 102

what’s inside

equipmentFUEL3

87

ESP Bomba Rotativa - Industrial FR Pompe de Baril Rotative industrielle DE Kurbelpumpe

Industrial Rotary Fuel Pumps

Product Features

RBP-3V

CC 92

Ÿ Industry Standard for Rotary pumps, these are by far the heaviest duty, for severe outdoor use in extreme weather conditions

Ÿ Deliver media with a head / lift upto 20'

Ÿ Solid cast iron construction, fully CNC machined to close tolerances

Ÿ Pump Handle rotates a high quality sintered powder metal 3 Vane Rotor inside a highly finished pumping chamber

Ÿ Graphite Veins are self lubricating & non wearing

Ÿ High Quality graphite Seal allows the pump to be used with a wide variety of fluids including Diesel with upto 15% Ethanol blend

Ÿ Self Priming operation with discharge up to 38 LPM (10 GPM)

Ÿ Supplied complete with 2" Bung, Telescopic Suction Tube with Strainer for use with 15 gallons (50 litre) – 55 gallons (205 litre) barrels

Ÿ Also available - Drip pan for use with the above pump

WETTED COMPONENTS Cast Iron, Steel, Graphite, Paper, Polypropylene

DO NOT USE With Water Based Media

fuel pumps & accessories

Vaccum Breaker

Discharge Spout

Nozzle Holder

8’ x 3/4”Anti StaticFuel Hose

Crank

Grip

FlameArrestor

2” Bung

NonSparking

Aluminum Nozzle

TelescopicSuction Tube

PUMP CHAMBER WITH 3 VEIN CONSTRUCTION

Graphite Veins

Sintered Powder

MetalRotor

RBP/3V/H/FFM Approved Pump with 8' Anti Static

Hose, Nozzle, Nozzle Holder, Flame Arrestor & Vacuum Breaker. For use with Class I & Class II flammable & combustible liquids

such as Gasoline, Naphtha, Alcohols & other solvents compatible with the pump

components. Ideal for quickly refueling gasoline powered vehicles or equipment


CAT. NR.

FM Approved Pumps

Service Parts

RBP/3V

RBP/3V/H

RBP/3V/H/F

RBP/3V/F

DP/RBP/3V

KIT/RBP/3V

SA/HOS/RBP/3V

44080

44081

44082

44084

44083

44086

44338

Steel Spout

8’ Anti-Static Hose, Non-Sparking Aluminum

Nozzle & Nozzle Holder

8’ Anti-Static Hose, Non-Sparking Aluminum

Nozzle & Nozzle Holder, Vaccum Breaker &

Flame Arrestor

Steel Discharge Spout, Drip Pan with Flame Arrestor

Replacement Drip Pan only

Repair Kit

8’ x 3/4” Replacement Hose

DESCRIPTIONORDERING NR.

CC 93

38 LPM (10 GPM)


Variants

Drip PanDP/RBP/3V

RBP/3V Pump with Steel Discharge Spout for use with Petroleum based fluids, Diesel & Kerosene. Ideal for use with Barrels, drums & tanks for transferring media into smaller containers

RBP/3V/HPump with 8' Antistatic Hose, Nozzle & Nozzle Holder for use with Petroleum base fluids, Diesel & Kerosene. Ideal for use with Barrels, Drums & tanks for quickly refueling Diesel powered vehicles or equipment

RBP/3V/FFM Approved Pump with Drip pan & Flame Arrestor. For use with Class I & Class II flammable & combustible liquids such as Gasoline, Naphtha, Alcohols & other solvents compatible with the pump components

KIT/RBP/3V

Includes pump head gasket, graphite

veins (3), vein springs (3), shaft nut,

packing & packing nut

Key Best Seller *

*

88

ESP Bomba rotativa - elevador 3:1 FR Pompe à rotation de rappel 3:1 DE Kurbelpumpen 3:1

Rotary Booster Pump 3:1

Product Features

RB-3

Ÿ Geared Rotary barrel pump with 3 times discharge per rotation. For every complete handle turn, the rotor turns 3 times

Ÿ Ideal for use where volume fuel dispensing is needed, such as construction sites, workshop, aviation, farms / ranches, boat etc.

Ÿ Die Cast Aluminum construction with sintered gear driven die cast zinc rotor & vanes

Ÿ Discharge through 1.8 m of delivery hose with metal nozzle

Ÿ Complete with a 3 pc threaded suction tube for use on 15 gallons (50 litre) – 55 gallons (205 litre) barrels

WETTED COMPONENTS Aluminum, Zinc, Steel, NBR & PVC Nitrile

RECOMMENDED USE Gasoline, Diesel Fuel, Kerosene & Lubricating Oils up to SAE 30

DO NOT USE With Corrosive liquids, solvents, acids, alkalis etc.

Dispenses 55 gallon / 205 litresin 3 minutes

Note that fuels containing Ethanol will cause more frequent replacement of rubber parts

Never operate the pump near fire or source of spark. Some media may be explosive & dangerous to pump


CAT. NR. ORDERING NR.

RB/3H 44198

Aluminumdie cast handle

with securitylocking latch

“Built-In”NozzleHolder

2” Cast IronBung Adaptor

Available as spare:1.8 m discharge hose with metal nozzle, spring & hose clamp

SA/HOS/AA92/A2 44339


CC 94


Drive Shaft

Gear Mechanism

ZincVanes

Out

In

PUMP INTERNALS

89

ESP Bomba de transvase-diafragma FR Pompes de transvasement a membrane DE Handpumpen, doppelt wirkend

Double Diaphragm Fuel Transfer Pump

Product Features

DPP-1

Ÿ Heavy Duty Fuel Transfer pump with discharge up to 1 gallon per 5 strokes (800 ml / stroke)

Ÿ Ideal for use where compressed air / power is not easily available such as farms / ranches, construction sites, boat etc.

Ÿ Stainless Steel Piston & fuel resistant hi-nitrile rubber diaphragm

Ÿ Includes a 2” die cast bung adaptor & extra heavy duty steel handle with security locking latch

Ÿ Pump inlet fitted with easy to clean wire mesh screen

Ÿ Complete with telescopic suction tube with non-return valve

Ÿ For use with 15 gal. (50 litre) - 55 gal. (205 litre) drums

WETTED COMPONENTS Aluminum, Steel, Stainless Steel, Poly Acetal & NBR

RECOMMENDED USE Gasoline, Diesel fuel, Fuel Oil, Motor Oil & other light petroleum products


Note that Fuels containing Ethanol will cause more frequent replacement of rubber parts

Do not use with Fuels with Ethanol content greater than 10%


Pump is designed primarily for use with low viscosity media. Pumping heavy fluids may cause undue stress resulting in fracture


CAT. NR. ORDERING NR. DESCRIPTION

DPP/1

SA/HOS/RBP/3VGKT/DPP/1

Service Parts

44195

4433844194

Complete Pump

8’ x 3/4” Replacement HoseNon Return Reed Valve Kit

1 gallon in 5 strokes (800 ml per stroke)

“Built-In” Nozzle Holder

SecurityLocking Latch

Stainless Steel Piston

2” Die CastBung Adaptor

HeavyDutyAluminumDie CastConstruction

Discharge through8’ of anti-staticneoprene rubberhose with die castnozzle

CC 95


Out

StainlessSteel

Piston

Non ReturnReed Valves

In

Diaphragm

PUMP INTERNALS

90

ESP Bomba Electricas de gasolina FR Pompe electrique de transfert gasoil / Fuel DE Elektro Kraftstoffpumpe

Heavy Duty Electric Fuel Pumps

CC 96


Product Features

FPM

Ÿ Heavy Duty Industrial Grade Fuel pumps designed for Every Day use in Agricultural, Construction, Automotive & Industrial applications

Ÿ Rain & Weather proof for tough outdoor use

Ÿ Lightweight, yet strong non corroding Aluminum Die cast construction

Ÿ Geared pump design using precision sintered metal gears

Ÿ Geared construction makes the pump tolerant to contaminants in fuel; in addition to offering tremendous suction & minimal noise

Ÿ cUL, ATEX & IECEx listed Motor

Ÿ Duty Cycle: 30 Minutes On / 30 Minutes Off

WETTED COMPONENTS Aluminum, Steel, Cast Iron, Nylon, NBR, Zinc, Viton, Polypropylene, PVC

RECOMMENDED USE Gasoline, Diesel, E15 Fuel, Kerosene, Bio Diesel (B20)

12’ x 3/4” Anti Static

Rubber Hose

Manual Fuel Control Nozzle

with Built-in Swivel

Nozzle Hanger for safe storage of nozzle when not in use

Wire Mesh Strainer designed for easy cleaning without pump disassembly

Provision toPad Lock

2pc threaded Suction Tube 34” (864 mm)

long

Spin Collar for easy

installationON/OFF Switch

CC 97


FLOW

Upto 15 GPM (57 LPM)*

Pump Specifications

Description

Flow Rate (at pump outlet)

Explosion Proof Motor

Amp

Internal Bypass Valve

Suction Pipe

Hose

Tank Adaptor

Inlet

Outlet

Dispensing Nozzle

Battery Cable (2 wire)

Heavy Duty 12V DC


1/7 HP 12V DC

12 Amp

Yes

Steel

3/4” x 12’ Anti Static Hose

2” Threaded

1” NPT

3/4” NPT

3/4” Manual with Swivel

15’

Heavy Duty 24V DC


1/7 HP 24V DC

6 Amp

Yes

Steel


2” Threaded

1” NPT

3/4” NPT


15’

Heavy Duty 115V AC


1/8 HP 115V AC, 60 Hz.

1.7 Amp

Yes

Steel


2” Threaded

1” NPT

3/4” NPT


NA

Heavy Duty 220V AC


1/8 HP 220V AC, 50/60 Hz.

1 Amp

Yes

Steel


2” Threaded

1” NPT

3/4” NPT


NA

FPM-12 FPM-24 FPM-115 FPM-220

*measured at pump outlet with vehicle engine switched on



PUMP INTERNALS

Sintered Powder

Metal Gears

Wire MeshStrainer

FPM-12FPM-24FPM-115FPM-220

44040440414404244043

Key Best Seller *

*

MOTOR

12 V DC24 V DC115V AC220V AC

DRUM MOUNTING

91

ESP Filtro de Fuelle FR Filtro de Fuelle DE Fuel Filter

Fuel Filter

Product Features

FFL-02

Ÿ High Flow Fuel filter, complete with 10 micron fuel filter element

Ÿ Durable & lightweight design for easy installation on both mobile & stationary fuel tanks and on gasoline & diesel fuel pumps

Ÿ Ideal for use in agricultural & industrial applications

Ÿ Rust & weather resistant for years of service

Ÿ The 10 micron paper filter element filters even small particles of rust, scale, grit, dirt, sand & lint at a gravity flow of 19 litres / minute (5 GPM) with only a 24" (600 mm) head. The filter element has 366 square inches of filtering surface which results in more particle retention, which means cleaner fuel, and fewer costly engine repairs

Ÿ Replacement filter elements available as spare

Ÿ Also available water block fuel filter element which separates water from fuel

WETTED COMPONENTS Aluminum, Polypropylene, NBR, Steel, Paper element, Nylon, Brass

RECOMMENDED USE Gasoline, Diesel Fuel

DO NOT USE With water based products, Gasohol, Aviation fuels, Race fuels etc.

Replacement FilterElement

Translucent polypropylenefilter bowl gives a visual check of the filter element& permits removal ofsediment & water in the bowl

Aluminium die castfilter head is threaded1” at the inlet & outlet

Brass drain cock can be operated by a simple turn & releases accumulated water & unwanted contaminants


CAT. NR. ORDERING NR. DETAILS

FFL/02/BSPFFL/02/NFF/FFL/10FF/FFL/10-WB

44390443914439544397

Threaded 1” BSPThreaded 1” NPTFuel Filter Element 10 micronsWater block Fuel Filter Element 10 microns

Max. WorkingPressure150 PSI(10 BAR)

CC 98


ControlNozzle

Discharge Hose

Outlet

Cut Off Valvebetween Filter & Tank

Fuel Tank

Inlet

Filter Head

Gasket

Drain Valve

Filter Element

Filter Bowl

FUEL FILTER INSTALLATION

92

ESP Pistola Manual FR Pistolet Standard de Distribution Gasoil / Fuel DE Standard-Füllpistole

Fuel Control Nozzles - Manual

Product Features

FCN

Ÿ For use with Electric Fuel Pumps & gravity feed applications

Ÿ All Metal Construction with the Body, Discharge Spout, Trigger & Guard made from Aluminium

Ÿ Hose Swivel at Inlet for increased maneuverability & convenience in use

Ÿ Manual control. Also includes continuous flow switch for unattended dispensing

Ÿ Designed for minimal back pressure & reduction in flow

Ÿ 6-5/16” (160 mm) long Spout

Ÿ For use with Diesel, Kerosene & Petrol

WETTED COMPONENTS Aluminum, Steel, Nylon, Nitrile Rubber

Fuel Nozzles can also be custom manufactured with curved Discharge Spout

Note

AluminiumDischargeSpout

Trigger Guard

Trigger

HoseSwivel

Continuous Flow Switch


CAT. NR.

FCN/S/3-4/3-4/BSP

FCN/S/0-1/0-1/BSP

FCN/S/3-4/3-4/N

FCN/S/0-1/0-1/N

45580

45581

45590

45591

3/4” BSP (F)

1” BSP (F)

3/4” NPT (F)

1” NPT (F)

3/4” (19 mm)

1” (25 mm)

3/4” (19 mm)

1” (25 mm)

ORDERING NR. INLET THREADS OUTLET OUTSIDE DIA.

CC 99


6-5/16” (160 mm)

93

ESP Contador para gasolina FR Compteurs mecaniques Gasoil / Fuel DE Zähler

In-Line Fuel Meter

Product Features

DM-100

Ÿ Extremely Compact & High Accuracy Flow meter with Mechanical Register

Ÿ Handles a wide range of fluid viscosities upto 1000 cPs

Ÿ Meter is designed for both pump In-Line applications & gravity flow applications (with a minimum gravity head of 550 mm

Ÿ Built using Oval gear technology for highest accuracy (+/- 1% of reading)

Ÿ Register cap can be easily removed & rotated to every 90° orientation for display reading

Ÿ Supplied with integrated mesh strainer

Ÿ Available in a choice of litre / gallon version

WETTED COMPONENTS Aluminum, Steel, PEI Resin, Viton

RECOMMENDED USE Diesel, Gasoline, Kerosene & oils with viscosity upto 1000 cPs

Not to be used to measure media for resale

Note

6 Digit Accumulative Totalizer(max. 999,999 litres / gallons)

4 Digit Re-Settable Batch Totaliser (max. 999.9 litres / gallons)


CAT. NR. ORDERING NR.THREADS

(INLET/OUTLET)UNIT OF

MEASURE

MFM/DM100/BSPMFM/DM100/NMFM/DM100G/N

456304563145632

1”BSP (F)1” NPT (F)1” NPT (F)

LitreLitre

Gallon

Max. WorkingPressure145 PSI(10 BAR)

FLOW

Range: 10° C (14° F) to 80° C (176° F)

TEMPERATURE

3 to 80 LPM (0.8 to 21.1 GPM)

CC 100


94

ESP Contador para gasolina FR Compteurs mecaniques Gasoil / Fuel DE Zähler

Fuel Flow Meter ( In-Line Flow Meter )

Product Features

M10

Ÿ High Accuracy Flow meter with Mechanical Register

Ÿ Handles a wide range of fluid viscosities with exceptional levels of repeatability & durability

Ÿ Meter is designed for both gravity & pump In-Line applications

Ÿ Built using Oval gear technology for highest accuracy (+/- 1% of reading) with a repeatability of 0.03%

Ÿ Meter design allows for both horizontal & vertical mounting; as well as fast & easy on site servicing without removal from application

Ÿ Supplied complete with Calibration certificate

Ÿ Available in a choice of litre / gallon version

WETTED COMPONENTS Aluminum, PPS (Polyphenylene Sulphide Resins), 316 Stainless Steel, Nitrile Rubber

RECOMMENDED USE Fuels & Oils with viscosity upto 1000 cPs

Not to be used to measure media for resale

Note

6 Digit Accumulative Totaliser (max. 999,999 litres / gallons)

4 Digit Re-Settable Batch Totaliser (max. 999.9 litres / gallons)


CAT. NR. ORDERING NR.THREADS

(INLET/OUTLET)UNIT OF

MEASURE

MFM/M10/BSPMFM/M10/NMFM/M10G/N

456014561345614

1”BSP (F)1” NPT (F)1” NPT (F)

LitresLitres

Gallons

Max. WorkingPressure500 PSI

(34.5 BAR)

FLOW

Max. Temp: 80° C (176° F)

TEMPERATURE

For Fluids with viscosity above 5 cPs: 6 to 120 LPM (1.6 to 32 GPM)

For Fluids with viscosity below 5 cPs: 10 to 100 LPM (2.6 to 26 GPM)

CC 101


Inlet / Outlet: 1” (F)

95

ESP Bomba de transvase - Bio-Diesel FR Pompe à levier - Bio Diesel DE Faßpumpen - Bio Diesel

Lever Action Bio-Diesel & E85 Fuel Pump

Product Features

LBP-85

Ÿ An extremely rugged & strong all steel pump designed specifically for use with Bio Diesel & E85 fuels

Ÿ Constructed from select materials which are compatible with Bio Diesel & E85 fuels

Ÿ Fracture proof design with steel pump head & bung

Ÿ Extra long pump body makes it easy to place refill containers on the drum for convenient filling

Ÿ Complete with telescopic suction tube for use on 15 gallons (50 litre) – 55 gallons (205 litre) barrels

WETTED COMPONENTS Steel, Viton & PTFE

RECOMMENDED USE Bio Diesel & E85 fuels


300 ml (10 oz.) / stroke



CAT. NR. ORDERING NR. FOR USE ON

LBP/85 44109 15 gal. (50 litre) - 55 gal. (205 litre)drums

Fracture proofsteel pump head

Steel bung with2” threads

11” (280 mm)clearance betweenthe outlet & drumfor convenientplacement ofrefill containers

CC 102


what’s inside

Diaphragm/Bilge Pump / 104

Diaphragm Pump - Food Grade / 105

Chemical Pumps / 106

Plastic Lever Pump / 107

Rotary Chemical Pump / 108

Plastic Oil Pump / 109

Siphon Pumps / 110

Brass Transfer Pumps / 111

Brake Fluid Transfer Pump / 112

Tire Sealant Pump / 112

pumpsSPECIALITY4

96

ESP Bomba de transvase - diafragma FR Pompe de transvasement a membrane DE Handpumpe

Diaphragm / Bilge Pump

Product Features

DPP-20

Ÿ Hand Operated Diaphragm pump, designed to work in any position-Vertical, Horizontal, at an angle or even upside down

Ÿ Pump can be mounted anywhere: on a wall, wooden base, on a drum etc.

Ÿ Pump handle can be fitted in line or at 90 degrees to the inlet & outlet ports, which makes installation very easy

Ÿ Constructed from minimal parts, the pump is virtually maintenance free. The choice of materials used in the pump construction allows high Chemical compatibility making it useful for a variety of applications in Industrial, Agricultural, Automotive & Marine

Ÿ Designed to operate as Bilge pump to evacuate standing bilge water

WETTED COMPONENTS Polyacetal, Thermoplastic Polyurethane, Stainless Steel & PVC

RECOMMENDED USE Water, Sea Water, Diesel, Bio Diesel, Kerosene, Gasoline, Mineral Oils, heating oils, Synthetic Oils, Engine Oils, Antifreeze, emulsions & liquids with small bodies in suspension

DO NOT USE WITH Urea, Food grade media or any media not compatible with the pump components

-10° C - +40° C (14° F - 104° F)

TEMPERATURE

16.6 litres / minute(4.40 gal. per minute)


CAT. NR.

DPP/20

DPP/20A

DPP/20B

44500

44501

44502

ORDERING NR.

DPP/20APump supplied complete with Suction & Discharge Hose (1” I.D. x 2 m long), Delivery Nozzle & Hose Clamps

DPP/20BPump only with 1” (25 mm) Inlet & Outlet Hose Barb ports

Variants DPP/20Pump supplied complete with Suction & Discharge Hose (1” I.D. x 2 m ), Delivery Nozzle & Hose Clamps, Drum Attachment Kit for converting pump for mounting on drums with a 2” opening; complete with Suction Drum Hose (3/4” I.D. x 1.25 m ), Connecting Links & Strainer

special application pumps

CC 104

97

ESP Bomba de transvase diafragma para líquidos alimenticios FR Pompe de transvasement a membrane speciales liquides alimentaires

DE Handpumpe

Diaphragm Pump - Food Grade

Product Features

DPP-30

Ÿ Hand Operated Diaphragm pump, designed to work in any position-Vertical, Horizontal, at an angle or even upside down

Ÿ Pump can be mounted anywhere: on a wall, wooden base, roof etc.

Ÿ Pump handle can be fitted in line or at 90 degrees to the inlet & outlet ports, which makes installation very easy

Ÿ Constructed from minimal parts, the pump is virtually maintenance free.

Ÿ The choice of materials used for pump construction allow it's use with liquid foodstuffs making it useful for a variety of applications in agricultural, preserving , wine making , oil production etc.

Ÿ Comes complete with pump Body, Suction & Discharge Hose, Delivery Nozzle & Stainless Steel Hose Clamps (3)

WETTED COMPONENTS Food grade Polyacetal, Food Grade Thermoplastic Polyurethane & Food Grade PVC

RECOMMENDED USE Aqueous foods, acidic foods with pH < 5, such as water, cider, fruit or vegetable juices, lemonade, soda , syrups, coffee, tea, liquid chocolate, beer, wine, brandy, liqueurs, vegetable oils, milk, vinegar etc. Suction Hose (1” ID x 2m)

Discharge Hose (1” ID x 2m)


CAT. NR.

DPP/30 44510

ORDERING NR. -10° C - +40° C (14° F - 104° F)

TEMPERATURE

16.6 litres / minute(4.40 gal. per minute)

CC 105


98

ESP Bomba quimica - Polypropylene FR Pompa de chimique - Polypropylene DE Chemikalienpumpe - Polyproplene

Polypropylene Chemical Pump

Product Features

CMP-10

Ÿ Self priming Vertical Lift Pump designed for use with antifreeze, detergents etc.

Ÿ Polypropylene construction with steel plunger rod & viton seals

Ÿ Complete with 2” polypropylene bung adaptor for use on 55 gallons (205 litre) drums

WETTED COMPONENTS Polypropylene, Steel & Viton

RECOMMENDED USE Antifreeze, detergents, windshield fluids, glycerine, mild acids, petroleum based media etc.

DO NOT USE With strong acids, lacquers, acetone , gasoline etc.



CAT. NR.

CAT. NR.

CMP/10

CMP/12

44192

44193

ORDERING NR.

ORDERING NR.

99

ESP Bomba quimica - Nylon FR Pompe de chimique - Nylon DE Chemikalienpumpe - Nylon

Nylon Chemical Pump

Product Features

CMP-12

Ÿ Self priming Vertical Lift Pump designed primarily for use with lacquer thinners, Urea, AdBlue , DEF etc.

Ÿ Nylon construction with stainless steel plunger rod & PTFE seals

Ÿ Complete with 2” polypropylene bung adaptor for use on 55 gallons (205 litre) drums

WETTED COMPONENTS Nylon, Polypropylene, Stainless Steel & PTFE

RECOMMENDED USE Lacquer thinners, Acetone, Antifreeze, Brake Kleen, Detergents, Glycerine, Water, Weed Killer, mild acids, AdBlue, Urea , DEF, petroleum based media etc.

DO NOT USE With strong acids, bleach, gasoline etc.




CC 106

100

ESP Bomba de transvase - Plastico FR Pompe de transvasement multi liquides DE Handpumpe

Plastic Lever Pump

Product Features

PLP

Ÿ Lever Action Barrel pump, designed for use with high viscosity oils, agricultural chemicals etc. Pump design makes it extremely convenient & comfortable to pump thick oils without excessive fatigue

Ÿ Choice of materials used in the pump construction, make it versatile for use with water based media, as well as select chemicals

Ÿ Built-In 2” Bung Adaptor allows the pump to be fixed on Drums with 2” Opening. Pump position can be adjusted using the Lock Nut incorporated in the pump body

Ÿ Pump outlet is fitted with an Air Vent Cap which when loosened breaks the Siphon action

Ÿ Supplied complete with suction tube for use with 15- 55 gl (50-205 Litre ) drums & 2m x ¾” Flexible Corrugated discharge hose

WETTED COMPONENTS Polyacetal, Polypropylene, Polyethylene, PVC & Viton

FOR USE WITH Water-based media, detergents, soaps, antifreeze, windshield washer, Hydraulic Oils, Lubricants, Herbicides & Pesticides, Adblue, Urea, DEF etc.. Pump should only be used with Non-flammable liquids

DO NOT USE With any media not compatible with materials used in the pump construction.

These pumps must never be used for Fuel Transfer or with Thinners, Solvents etc.

Anti SiphonVent Cap

OperatingLever

Lock Nut to mountpump in any postion

2” Bung Adaptor

Suction Tube

Flexible corrugated PVC Hose

(2 m x 3/4” I.D.)


CAT. NR.

PLP/02 44185

ORDERING NR.

1 Pint (500 ml) per stroke

CC 107


ESP Bomba retativa - quimica FR Pompe à rotation - chimique DE Chemikalien Kurbelpumpen

Rotary Chemical Pump

Product Features

PRP

Ÿ Designed for use with media with which a regular cast iron or steel barrel pump cannot be used

Ÿ Pump body is made from glass filled polypropylene with Ryton veins

Ÿ All seals are from Viton & all pump hardware is Stainless Steel

Ÿ Strainer fitted at the suction tube inlet stops contaminants from entering the pump

Ÿ Complete with threaded polypropylene suction tube & a choice of two 2” bung adaptors for use on both plastic & metal drums of capacity 15 gallons (50 litre) – 55 gallons (205 litre)

WETTED COMPONENTS Polypropylene, Ryton, Viton & Stainless Steel

RECOMMENDED USE For dispensing water based media, antifreeze, Urea, Adblue, DEF, Benzene, Detergents, Glycerine, acids, chemicals etc., in addition to use with all petroleum based products

DO NOT USE With Acetone, Lacquer, Mineral Oils, Solvents, Turpentine etc.


CAT. NR.

PRP/01 44191

ORDERING NR.

5 litres (1.3 gallon) per 20 turns

Stainless steelhardware

Bung with 2” threads

Strainer

101


CC 108


CAT. NR.

ERP/01 44197

ORDERING NR.

102

ESP Bomba rotativa - polypropylene FR Pompe à rotaion - polypropylene DE Polypropylen Pumpen

Plastic Oil Pump

Product Features

ERP

Ÿ Low cost rotary pump for dispensing oil based fluids

Ÿ Pump body , rotor & veins are made from polypropylene

Ÿ Shaft seal is made from viton & all pump hardware is Steel

Ÿ Strainer fitted at the suction tube inlet stops contaminants from entering the pump

Ÿ Complete with threaded polypropylene suction tube & 2” bung adaptor for use on drums of capacity 15 gallons (50 litre) – 55 gallons (205 litre)

WETTED COMPONENTS Polypropylene, Viton & Steel

RECOMMENDED USE For Oil Based Media, Antifreeze etc.

DO NOT USE With water based media, Acids, Chemicals, Solvents, Lacquer, Gasoline etc.

5 litres (1.3 gallon) per 20 turns

Steelhardware

Bung with 2” threads

Strainer

CC 109


103

ESP Bomba de transvase FR Pompe de transvasement a Poussoir DE Handpumpe

Siphon Pumps

Product Features

SPH-1

Ÿ Easy to use, polyethylene pumps siphon liquids to lower levels than the height at which the pump is installed. These are easy to prime & start within 6-7 strokes. Pump requires no further operation & keeps working in Auto position, emptying the media being pumped. All pumps are equipped with a Vent Cap on top. Opening the cap stops the discharge

Ÿ To dispense media at levels higher than the pump, pump bellow needs to be continuously operated

Ÿ Supplied complete with Flexible Corrugated Discharge tube

RECOMMENDED USE Water-based fluids, detergents, waxes, soaps, antifreeze, some mild acids, and other liquids compatible with pump materials of construction

Pump should only be used with light weight & non-flammable liquids

DO NOT USE With any media not compatible with materials used in the pump construction.

These pumps must never be used with concentrated acids, Acetone, Benzene etc

SPH-2 SPH-3

Vent Cap

Vent Cap

Vent Cap


CAT. NR.

SPH/1

SPH/2

SPH/3

44400

44401

44402

1-1/2” for use with pails

2” for use with drums

2” for use with drums

5 - 20 litre / 5 gal. pails

205 litre / 55 gal. drums

205 litre / 55 gal. drums

21.69” (551 mm)

46.45” (1180 mm)

47.70” (1212 mm)

Polyethylene

Polyethylene & Polypropylene

Polyethylene & PVC

6.5 LPM /2 GPM

17.5 LPM / 5 GPM

21 LPM / 7 GPM

DISCHARGE FITS DISCHARGE HOSE LENGTH WETTED COMPONENTSORDERING NR. BUNG

Pumps must never be used with Hot Media at temperatures above 60° C (140° F)

SPH/1 SPH/2 SPH/3


CC 110

ESP Bomba de cobre amarillo FR Pompe en laiton DE Messingtransferpumpe

Brass Transfer Pumps

Product Features

BLG-1

Ÿ A choice of 2 Portable Hand pumps that provide clean, quick, hassle free transferring or evacuating of a wide variety of media including engine oil, coolants, transmission fluid, power steering fluid, oils, diesel, water, Antifreeze etc.

Ÿ Pumps have a non corroding premium Brass construction & hand removable Neoprene caps. These are small & lightweight & fit easily in a toolbox or the trunk of a car

Ÿ Self priming

Ÿ Smooth & easy Operation

Ÿ Fully serviceable with no threaded parts

Ÿ For use on cars, boats, motorcycles, ATV’s, lawn & garden equipment etc.

BLG-2

BLG/2Pumps approx. 250 ml (8.50 oz.) per stroke. Comes complete with 60” (1500 mm) of ½” (12 mm) dia. discharge hose.

Ideal for use as a Transfer/Bilge pump with Oils, diesel, water , Antifreeze etc..

104


1.1/4” (32 mm)

Suction Hosefor Dipstick hole

Discharge Hose

1-1/4” (32 mm)

Typical applications include

Ÿ Draining out oil from crank case or ATF through dipstick hole. Does it from under the hood & not under the car

Ÿ Cleaning sludge accumulation from oil filter case

Ÿ Removing water from radiator to add antifreeze or to service thermostat or pump

Ÿ Draining Stopped sinksŸ Transferring fluids from

one container to another, without lifting

Ÿ Pumping water out of small boats

BLG/1Pumps approx. 100 ml (3.20 oz.) per stroke. Comes complete with 24” (600 mm) of ½” (12 mm) dia. discharge hose & 40” (1000 mm) of ¼” (6 mm ) dia. of Suction Hose.

CC 111


CAT. NR.

BLG/1

BLG/2

44520

44521

10.1/2” (265 mm)

17” (430 mm)

100 ml (3.20 oz.)

per stroke

250 ml (8.50 oz.)

per stroke

CAPACITYORDERING NR.

OVERALL LENGTH

Max. Temperature: 60° (140° F)

TEMPERATURE

106

ESP Bomba - Tyre Sealant de transvase FR Pompa à Piston - Tyre Sealant DE Faßpumpen - Tyre Sealant

Tire Sealant Pump

Product Features

TSP-03

Ÿ Hand operated Tire Sealant Pump for pumping Tire Sealant from 5 to 6.1/2 gallon pails directly into tubeless tires

Ÿ Powder coated pump body with aluminum die cast adjusting flange & pump handle

Ÿ Includes Adjusting collar to pre-set amount dispensed per stroke

Ÿ Powder coated 12” (310 mm) steel drum cover

Ÿ Complete with 5' braided PVC hose fitted with Quick connect valve stem coupler

Ÿ Return valve included

WETTED COMPONENTS Steel, Aluminum, NBR, PVC

Upto 230 ml (8 oz.) / stroke

Pump Outlet

Adjusting Collar

Adjusting Flange


CAT. NR.

TSP/03 44199

ORDERING NR.

105

ESP Bomba de transvase FR Pompe de transfert DE Faßpumpen

Brake Fluid Transfer Pump

Product Features

FTP

Ÿ Designed to pump most non corrosive fluids such as brake fluids & power steering fluid from 1 gallon / 5 litre cans

Ÿ Pump body is made from Aluminum with Hi Nitrile seals

Ÿ Pump design ensures zero contact between the fluid being pumped & air

Ÿ Fastens directly onto can. Furnished with 3 cap sizes to fit most standard 1 gallon / 5 litre plastic and metal containers. Also includes 3” (75 mm) extension for taller cans

Ÿ Comes with a 36” hose complete with check valve in the metal nozzle providing an air tight seal


CAT. NR.

FTP/01 44190

ORDERING NR.


CC 112

accessoriesAIR LINE5

Air Regulator / 114

Air Lubricator / 114

Filter Regulator Combination / 115

Filter-Regulator & Lubricator - 2pc / 115

Air Blow Guns / 116

Air Coupler & Nipple / 118

Air Line Fittings / 118

what’s inside

air line accessories

107

ESP Regulador FR Regulateur DE Regler

Air Regulator

Ÿ Maintains steady outlet pressure, unaffected by variations / fluctuations in the inlet pressure

Ÿ Aluminum die cast construction with a Non raising “Press to Lock” adjusting knob for locking at any set pressure

Ÿ Can be installed in any position (horizontal / vertical etc.)

Product Features

SpecificationsMaximum Flow Rate

Pressure Adjustment Range

21 CFM (600 LPM)

7 to 145 PSI (0.5 to 10 BAR)


CAT. NR. ORDERING NR. CAT. NR. ORDERING NR. DESCRIPTION INLET/OUTLETPORT SIZE

PRESSURE GAUGEPORT SIZE

R13614/GB 60021

BSP NPT

R13914/GB 60071 Miniature 1/4” 1/8”

108

ESP Lubricador FR Graisseur DE Fettspritze

Air Lubricator

Product Features

Ÿ Used to feed lubricants to air operated equipment, these maintain a constant oil-to-air density over a wide range of flow

Ÿ Fog/Micro Mist type , upto 50' Pipe runs

Ÿ Aluminum die cast head fitted with Oil drop indicator, oil drop controller & Oil filling plug

Ÿ Polycarbonate bowl & steel bowl guard

SpecificationsMinimum Flow Rate

Maximum Flow Rate 48 CFM (1350 LPM)

0.42 CFM (12 LPM)


CAT. NR. ORDERING NR. CAT. NR. ORDERING NR. DESCRIPTIONINLET/OUTLET

PORT SIZE

L1361/B 60211

BSP NPT

L1391/B 60261 Miniature 1/4”

Bowl Guard

Oil fillingplug

Oil dropindicator

Max. Pressure220 PSI (15 BAR)


Supplied complete with pressure gauge & mounting bracket

Supplied complete with mounting bracket

CC 114

1/4”

1/4” 1/4”

109

ESP Filtro Regulador Combinado FR Filtre regulateur combination DE Filter Regler Kombination

Filter Regulator Combination

Product Features

Ÿ Compact Combination unit for removing contaminants & moisture from compressed air in addition to regulating air pressure

Ÿ Regulator has a Non raising “Press to Lock” adjusting knob for locking at any set pressure

Ÿ Filter is designed with a Separator & Shield for efficient moisture separation.

SpecificationsMaximum Flow Rate


Filtering Element

Drain Type

20 CFM (550 LPM)

7 to 145 PSI (0.5 to 10 BAR)

Sintered Bronze (40 micron)

Semi Automatic



PORT SIZE

PRESSURE GAUGEPORT SIZE

FRC136134-S/GB

BSP NPT

FRC139134-S/GB 6037260322 Miniature 1/4” 1/8”

110

ESP Filtro Regulador Combinado - lubricador - 2 pedazos FR Filtre Regulateur Combinaison - graisseur - 2 morceaux

DE Filter Regler Kombination - Fettspritze - 2 stücke

Filter-Regulator & Lubricator - 2 pc


Product Features

Specifications

Ÿ Space saving 2 pc Modular Filter-Regulator combination & lubricator

Ÿ Filter removes contaminants & moisture from compressed air

Ÿ Regulator has a Non raising “Press to Lock” adjusting knob for locking at any set pressure

Ÿ Lubricator feeds lubricants to air operated equipment maintaining a constant oil-to-air density over a wide range of flow


Minimum Flow Rate

Maximum Flow Rate


Filtering Element

Drain Type

0.42 CFM (12 LPM)

18 CFM (500 LPM)

7 to 145 PSI (0.5 to 10 BAR)

Sintered Bronze (40 micron)

Semi Automatic



PORT SIZEPRESSURE GAUGE

PORT SIZE

FRCLM136134-S/G

BSP NPT

FRCLM139134-S/G 6045560405 Miniature 1/4” 1/8”

Supplied complete with pressure gauge & wall mounting bracket


CC 115

Supplied complete with pressure gauge & mounting bracket

Bowl Guard

Semi Automatic

Drain

SemiAutomatic

Drain

Oil drop indicator

Oil fillingplug

1/4”

1/4” 1/4”

NylonBody

Soft Moulded Rubber Grip

Stainless Steel

Nozzle

VENT IN THE TIP:prevents pressure

from exceeding30 PSI if tip

becomes blocked

VariableSpeedTrigger

ThreadedBrass Insert

ABG/3Safety Blow Gun with Stainless Steel Nozzle


111

Air Blow Guns / Safety Blow Guns

Product Features

Ÿ Impact & Weather resistant Nylon Body

Ÿ Corrosion resistant Stainless Steel Nozzle & parts

Ÿ Drop Resistant construction

Ÿ Handle with Soft rubber grip for convenience in continuous use

Ÿ Ergonomic design of the gun helps eliminate the risk of Carpel Tunnel Syndrome

Ÿ Brass threaded Air Inlet ensures that threads do not shear with repeated use

Ÿ Variable speed trigger for full control of amount of air dispensed

Ÿ Silent operation with noise level under 80 db. Confirms to OSHA STD 1910-95 (b) for max. noise level when used with air with 6 BAR (90 PSI) pressure

Ÿ Max. Blowing Force with minimal air consumption reduces energy cost , saving money each time the gun is used

Ÿ Confirms to OSHA STD 1-13.1 for safety & are classified as safety Blow guns*

*Except ABG/1

4.1/2” (114 m

m)

OKOK

Operating Temperature:-10°C TO 70°C (14°F TO 158°F)

TEMPERATURE

Operating Pressure:50 PSI to 235 PSI

(3.5 BAR to 16 BAR)

ESP Pistola de soplado FR Soufflettes Progressives DE Luft-Schlag-Gewehr

CC 116

ABG

Also Available:

4”(100mm) dia. Protective Chip Shield for ABG/3 Series Air Blow guns

PS/ABG/3 61050





CAT. NR. ORDERING NR. DESCRIPTION

NOISE LEVELAT 100 PSI*

BLOWING FORCE

AT 100 PSI

AIRCONSUMPTION

AT 100 PSI

ABG/1/1-4F/BSP

ABG/2/1-4F/BSP

ABG/3/1-4F/BSP

ABG/4/1-4F/BSP

61000

61001

61002

61003

BSP THREADS NPT THREADS kgs lbs.

ABG/1/1-4F/N

ABG/2/1-4F/N

ABG/3/1-4F/N

ABG/4/1-4F/N

61010

61011

61012

61013

Air Blow Gun

Air Blow Gun with Snub

nose Rubber Tip (OSHA ok)

Air Blow Gun with Stainless

Steel Nozzle (OSHA ok)

Air Blow Gun with Stainless

Steel Nozzle & Silencer (OSHA ok)

77 db

77 db

80 db

75 db

0.26

0.38

0.35

0.31

0.57

0.83

0.76

0.68

9.53 CFM

15.89 CFM

15.18 CFM

13.42 CFM

Variants

ABG/1Air Blow Gun

ABG/2 Safety Air Blow gun with Snub Nose Rubber tip

ABG/4Safety Air Blow gun with Stainless Steel Nozzle & Polyurethane Silencer

CC 117

Custom Manufactured

Extended Reach Air Blow Guns with nozzle lengths 13” (328 mm), 20” (498 mm) & 39” (1013 mm)

Pressure Reducing Air Blow Guns with output air Pressure of 30 PSI (2 BAR) when inlet air pressure is 90 PSI (6 BAR)

5.1/2” (140 m

m)

*Examples of decibel levels and related noises

82-90 db : Manual machine tool, Hand saw 91-95 db : Electric drill 96-104 db : Factory machinery 100-107 db : Snow blower 125 - 127 db : Chain saw

Key

Best Seller *

* *


112

Air Coupler & Nipple

Product Features

Ÿ For instantaneous coupling of grease guns, impact wrenches, paint sprayers & other air operated equipment

Ÿ Positive action locking mechanism ensures that coupler cannot be detached accidentally

Ÿ Unique Coupler design allows coupler & nipple to be joined together without the need to pull back sleeve

Ÿ Extra large air passage ensures greater air flow

Ÿ Automatic air check valve shuts off air instantly when uncoupled, providing leak proof seal

Ÿ Extra long stem of AN/1-4/N nipple & coupler body assures long service life & easy connections under severe operating conditions

Ÿ Heavy Duty Steel construction

Ÿ Threaded ¼” NPT

Ÿ Max. Operating Pressure : 250 PSI (17 BAR)

CC 118


CAT. NR.

QCA/1-4F/N

AN/1-4/N

IV/PGG*

60700

60701

60702

Air Coupler

Nipple for

Air Coupler

Universal

Air Nipple

1/4” NPT (F)

1/4” NPT (M)

1/4” NPT (M)

THREADSORDERING NR. TYPE

2-1/2” (65 mm)

2.18” (55.5 mm)

1.69” (42.9 mm)

1.47” (37.28 mm)

0.80” (20.21 mm)

1-1/16” (27 mm

)

AIR COUPLER

MALE NIPPLE FOR AIR COUPLER

UNIVERSAL AIR NIPPLE

*standard on all Groz Air Operated Grease Guns

1/4” NPT (F)

1/4” NPT (M)

1/4” NPT (M)

Hardened for increased wear resistance

113

Air Line Fittings

Product Features

Ÿ All Steel construction

Ÿ Used to connect Air Control Units to Air Inlet port on equipment

Ÿ Threaded ¼” (M) x ¼” (M)

Ÿ Standard accessory on all Groz GP and OP series Air Operated Pumps


CAT. NR.

NPL/KP71/K63

NPL/RP/N

60704

60703

1/4” BSP (M)

1/4” NPT (M)

THREADSORDERING NR.

NPL/KP71/K63

NPL/RP/N

Drum Wrench / 120

Drum Dolly / 120

Band Dollies / 121

Drum Cradle / 122

Drum Trolleys / 123

Drum Faucets/Tap / 124

Drum Bung Converter / 124

handlingDRUM6

what’s inside

114

115

ESP Lave bidón

ESP Carros Para Bidones

FR Clès en bidon

FR Chariot 4 Roves

DE Fasszange

DE Fasskarre

Drum Wrench (Drum Opener)

Drum Dolly

Product Features

Product Features

DRW

BDL-140

Ÿ An Easy & convenient tool to open almost all types of drums

Ÿ Ends of the wrench are designed to fit perfectly onto most 2” & ¾” drum plugs

Ÿ Wrench is manufactured from cast aluminum (LM25) , hardened & tempered for increased strength

Ÿ Compact design for easy storage

Ÿ Extra Heavy Duty Drum Dolly for conveniently moving 55 gallon ( 205 litre) drums in shop floors & rough workshop environment

Ÿ Heavy 3 mm (11 gauge) steel sheet construction

Ÿ Design incorporates wide steel cross bases for full base support

Ÿ Firmly welded 4 heavy duty castors

Ÿ Overall Height 6.1/2” (165 mm)

Ÿ Powder coated finish

Ÿ Available with a choice of solid cast iron wheels 3” (75 mm) dia. X 1.3/8”(35 mm) wide or phenolic wheels 3” (75 mm) dia. X 1.1/4” (32 mm) wide

Ÿ Holds drums of diameter 23” (584 mm)


CAT. NR.

DRW/AL-01 44385

ORDERING NR.


CAT. NR.

BDL/140

BDL/140S

44379

44373

Phenolic

Cast Iron

ORDERING NR. CASTORKey

Best Seller

Key

Best Seller

**

**

drum handling

CC 120

116

ESP Carros Para Bidones FR Chariot 4 Roves DE Wagen

Band Dollies

Product Features

BDL-105

Ÿ Heavy Duty Drum Dollies with welded 3 mm (11 gauge) steel sheet construction

Ÿ Design incorporates 4 strong steel braces

Ÿ Removable castor design with a choice of 4 phenolic or 4 cast iron castors 2.13/32” (61 mm) dia. x 27/32” (21 mm) wide for use in rough workshop environment

Ÿ Adjustable clamping bolt design allows the dolly to be adjusted easily for varying barrel/ pail diameters

Ÿ Fully powder coated finish

Key

Best Seller *

BDL-120 BDL-120S BDL-60

Variants

BDL-1054 phenolic wheels for moving 25-50 lbs / 5 gallon / 20 kg drums. Holds drums with dia. 10-1/4” – 11-9/32“ (260 – 287 mm)

BDL-1204 phenolic wheel castors.For moving 120 lbs / 16 gallon / 50 kg drums. Holds drums with dia. 13.1/2 ”– 14.1/4 “ (343 - 362 mm)

BDL-120S 4 cast Iron wheel castors. For moving 120 lbs / 16 gallon / 50 kg drums. Holds drums with dia. 13.1/2” – 14.1/4“ (343 - 362 mm)

BDL-604 phenolic wheel castors. For moving 60 kg drums. Holds drums with dia. 15” – 15.3/4 “ (381 – 400 mm)


CAT. NR.

BDL/105

BDL/120

BDL/120S

BDL/60

44369

44371

44372

44398

25-50 lb. / 5 gal. / 20 kg containers

50 kg / 120 lb. / 16 gal. containers

50 kg / 120 lb / 16 gal. containers

60 kg drums

10.1/4” - 11.9/32” (260 - 287 mm)

13.1/2” - 14.1/4” (343 - 362 mm)

13.1/2” - 14.1/4” (343 - 362 mm)

15” - 15.3/4” (381 - 400 mm)

Phenolic

Phenolic

Cast Iron

Phenolic

SUITABLE FOR CASTORSORDERING NR. DIA. RANGE

**

CC 121

drum handling

117

ESP Carros Para Bidones FR Chariot 4 Roves DE Wagen

Drum Cradle

Product Features

Ÿ Tilting Drum Cradle tips, rotates, moves & stores 55 gallon/ 205 litre / 400 lbs / 180 kg drums

Ÿ Equipped with self storing lever bar

Ÿ Large 2.1/2” (63 mm) non-sparking wheels make it suitable for use on rough flooring in gas/ fuel plants

Ÿ Maximum load 600 lbs / 273 kgs


Ÿ Unit comes flat packed in semi-knocked down condition for ease of transport

Variants

DRC-137

without axles & wheelsStationary style, supplied

JUST TIP TILT ... AND DRAIN


CAT. NR.

DRC/133

DRC/135

DRC/137

44367

44374

44375

Drum Cradle with axle, 2 rigid &

2 swivel wheels

Drum Cradle with axle & 4 rigid wheels

Drum Cradle without axle & wheels

ORDERING NR. TYPE

*Key

Best Seller

*

DRC-135Movable style,

complete with wheels

drum handling

CC 122

DRC-135DRC-133 DRC-137

New

118

119



FR Chariot 3 Roves

FR Chariot 2 Roves

DE Wagen

DE Wagen

Low Profile Drum Trolley

Drum Trolley - Adjustable

Product Features

Product Features

TRL-55

TRL/60 TRL/20-60

Ÿ Low Profile Drum Trolley with Drum Platform only ½” (12 mm) off the floor, facilitating easy loading & unloading

Ÿ Designed to conveniently move 55 gallon (205 litre) drums of all types

Ÿ Trolley can accommodate drums up to a dia. of 26” (660 mm)

Ÿ Extra Heavy Duty construction, fabricated from 5 mm (6 gauge) steel sheet, with a loading capacity of 1200 lbs (545 kgs)

Ÿ A choice of 2 Easy to use Drum Trolleys with adjustable mechanism for use with 25-50lbs / 5 gallon / 20 litre drums, to larger drums up to 120 lbs / 16 gallons / 60 litre capacity

Ÿ Ideal for transporting Oil / Grease barrels, as well as installing Air operated pump assemblies

Ÿ Removable pivoting handle includes drum tipper for easy loading

Ÿ Includes 2 large Phenolic front wheels 5.3/4” dia. (146 mm) x 1.7/8” (47 mm) wide & one back phenolic swivel wheel 3” (75 mm) dia. x 1.3/8” (35 mm) wide



Ÿ Steel construction in premium powder coated finish

Ÿ Heavy Duty wheels for use in rigorous workshop environment




CAT. NR.

CAT. NR.

TRL/55

TRL/60

TRL/20-60

44396

44377

44368

ORDERING NR.

ORDERING NR.

Adjustable drumheight locking clamp

Drum locking clamp

Adjustment baseknobs for holding drums of varying diameters

Drum locking clamp

Large phenolic wheels(4” dia. x 1” wide)

TRL/60 TRL/20-60

Key

New

CC 123

drum handling

Rubberizedwheels5” dia. x 1-3/8” wide

120

ESP Bidon Grifo FR Le Robinet pour baril DE Hahn für Fass

Drum Faucet / Tap

Product Features

Ÿ Fits into ¾” threaded opening on 55 gal. (205 litre) drums

Ÿ Facilitates convenient dispensing of media under gravity flow with the drum laid horizontally


CAT. NR.

FAU/3-4 44387

ORDERING NR.

121

ESP Adaptador de Rosca para Bidones FR Adaptateurs pour baril DE Adapter für Fass

Drum Bung Converter

Product Features

Ÿ Converts 2” Fine male threads found on most pumps / drum bungs to 2” male Coarse threads, making the pumps good for use on Plastic Drums with 2” Coarse Female threads

Ÿ Polypropylene co polymer construction, designed with 4 protrusions for easy tightening

Ÿ Dimensions: 3-1/4” (82 mm) dia. X 1.35” (34 mm) high


CAT. NR.

BUNG/P/2B 44386

ORDERING NR.

3/4” (M) Threads

Can bepad locked

“Built-in”buckethangar

2” Fine Threads

2” Coarse Threads

drum handling

CC 124

where to findALPHABETIC INDEX

AccessoriesAir Operated Oil PumpOil Control Gun

AdaptorsFemale LoaderQuick ConnectQuick Dis-Connect

Air Blow GunsAir Coupler & NippleAir Line FittingsAir LubricatorAir Nipple - UniversalAir Operated Oil Pump AccessoriesAir Operated Grease GunsAir Operated Grease Gun - High PowerAir Operated Pumps

Composite Grease Ratio Pump 50:1Grease Ratio Pump 50:1Composite Oil Pump 5:1Oil Ratio Pump

Air RegulatorsAir Release Valves

CC 83CC 82

CC 62CC 46CC 48CC116

CC 118CC 119CC 114CC 119CC 83CC 20CC 19

CC 49CC 50CC 78CC 76

CC 114CC 36

CC 104CC 105

CC 27CC 28CC 95CC 74CC 43

CC 124CC 122CC 120CC 124CC 123CC 123CC 120

CC 30CC 32

CC 67CC 114CC 48

CC 28CC 101CC 100

CC 43CC 96CC 79


CC 124CC 62

CC 115CC 115CC 118CC 89CC 88CC 61CC 99CC 98

CC 101CC 100

CC 95CC 96CC 92

CC 102CC 94CC 90

CC 35CC 38CC 42CC 43CC 42CC 44

CC 20CC 19CC 06CC 08CC 09CC 10CC 11CC 17CC 17CC 15CC 12CC 18CC 16CC 13CC 14


CC 30CC 32CC 28

CC 58CC 59CC 49CC 50

CC 121CC 37

CC 104CC 102CC 116CC 112CC 111CC 56CC 36

CC 124CC 74CC 26

CC 35CC 106CC 106CC 108


CC 118CC 25CC 25CC 24CC 26CC 24

Diaphragm / Bilge PumpDiaphragm Pump - Food GradeDispensers

Needle NoseSeal Off

Double Diaphragm Fuel Transfer PumpDrip Pans“Drive Fit” Grease Fitting InstallerDrum Bung ConverterDrum CradleDrum DollyDrum FaucetsDrum Trolley - AdjustableDrum Trolley - Low ProfileDrum Wrench (Drum Opener)

Easy Out ToolsElectric Fuel Pump - Heavy DutyElectric Oil PumpExtensions - Grease Gun

Flexible / RigidSteel ExtensionsSwivel

Ezee - Lube KitEzee Flow Pumps

Hoses, GreaseFlexibleHeavy Duty

Litre/Quart Sroke PumpLubricator - AirLubrication Kit

Injector Needles - GreaseIn-Line Flow MeterIn-Line Fuel Meter

FaucetsFemale Loader AdaptorsFilter - Regulator & Lubricator - 2 pcFilter Regulator CombinationFitting - Air LineFlexible Spout MeasuresFlexible SpoutsFollower PlatesFuel Control Nozzles - ManualFuel FilterFuel Flow MeterFuel Meter - In-LineFuel Pump

Double Diaphragm Fuel Transfer PumpHeavy Duty Electric Fuel PumpIndustrial Rotary Fuel PumpsLever Action Bio-Diesel & E85 Rotary Booster 3:1

Funnels

Grease CartridgeGrease FittingsGrease Fitting CapsGrease Fitting Installer - Drive FitGrease Fitting Thread TesterGrease Fitting UnblockerGrease Guns

Air Operated Grease GunsHigh Power Air Operated Grease GunLever Grease Gun - Heavy DutyLever Grease Gun - ProfessionalLever Grease Gun - Super ValueLever Grease Gun - Standard‘V’ Series Lever Grease GunMini Pistol Grease Gun - DeluxeMini Pistol Grease Gun - PopularPistol Grease GunPistol Grease Gun - ProfessionalPush Type Grease Guns‘V’ Series Pistol Grease Gun‘Vario’ Premium Pistol Grip Grease Gun‘Ultimate’ Pistol Grip Grease Gun

Grease Gun ExtensionFlexible / RigidSteel ExtensionSwivel

Grease Gun HoldersGrease Gun Holder - Heavy DutyGrease Hoses

FlexibleHeavy Duty

Grease Injector NeedleGrease Pumps

Grease Filler Pump - ProfessionalGrease Filler PumpGrease Ratio Pump 50:1, CompositeGrease Ratio Pump

Band DolliesBearing PackersBilge / Diaphragm PumpBio Diesel & E85 Fuel PumpBlow Guns - Air / SafetyBrake Fluid Transfer PumpBrass Transfer PumpsBucket GreasersBulk Loaders / Filler NipplesBung Converter - DrumBung NutsButton Head Couplers

Cartridge, GreaseChemical Pump - NylonChemical Pump - PolypropyleneChemical Pump - RotaryControl Valves - Grease

BoosterProfessional

Control Gun - OilControl Gun - Oil with Mechanical MeterControl Gun - Oil, AccessoriesCouplers

Air CouplerHydraulic Coupler 360° SwivelHydraulic Coupler 90°Hydraulic Coupler Air-OButton Head CouplersHeavy Duty

A

D

E

H

L

I

F

G

B

C

Page Page Page

Pin TypeProfessionalStandard

CC 27CC 23CC 22

CC 125

ALPHABETIC INDEX

NUMERIC INDEX

Pumps - FuelDouble Diaphragm Fuel Transfer Heavy Duty Electric Fuel PumpIndustrial Rotary Fuel PumpsLever Action Bio-Diesel & E85 Pump Rotary Booster 3:1

Pumps - GreaseBucket GreasersComposite Air Operated 50:1Filler PumpFiller Pump - ProfessionalGrease Ratio 50:1High Pressure Portable Greasing System

P

Quart Stroke PumpQuick Connect AdaptorsQuick Dis-Connect Adaptors

Thread TesterTire Sealant PumpTransfer GunTransfer Pumps - Brake FluidTransfer Pumps - Brass

Universal Air Nipple

Vertical Lift Pump

Regulator - AirRigid SpoutsRotary Barrel PumpRotary Barrel Pump - ProfessionalRotary Booster Pump 3:1Rotary Chemical PumpRotary Fuel Pump - Industrial

Safety Blow GunsSeal Off DispensersSiphon PumpsSpeciality Oil CansSpill Proof Plastic FunnelsSpouts - Flexible & RigidSpring Loaded PumpsSuction GunSuction TubesSwivel - Grease Gun ExtensionSwivel - Grease - Straight, 90°, Z

Q

T

U

V

R

S

CC 95CC 96CC 92

CC 102CC 94

CC 56CC 49CC 59CC 58CC 50CC 60CC 55

CC 78CC 76CC 79CC 72CC 66CC 64CC 65CC 70

CC 109CC 67CC 68CC 69CC 71CC 65

CC 112 CC 111CC 104CC 105CC 106CC 107CC 109CC 106CC 108CC 110CC 112CC 18

CC 116CC 28

CC 110CC 88CC 90

CC 88CC 71CC 85CC 75CC 34CC 54

CC 42CC 112CC 85

CC 112CC 111

CC 118

CC 65

CC 67CC 46CC 48

CC 114CC 88CC 68CC 69CC 94

CC 108CC 92

Pumps - Oil5:1 Composite Air OperatedAir Operated Ratio PumpsElectric Oil PumpEzee Flo PumpsFront Action Barrel PumpLever Action Barrel PumpLever Action Oil PumpOil Lube DispenserPlastic Oil PumpQuart / Litre Stoke PumpRotary Barrel PumpsRotary Barrel Pumps - ProfessionalSpring Loaded PumpsVertical Lift Pump

Pumps - Special ApplicationBrake Fluid Transfer PumpBrass Transfer PumpDiaphragm / Bilge PumpDiaphragm Pump - Food GradeNylon Chemical PumpPlastic Lever PumpPlastic Oil PumpPolypropylene Chemical PumpRotary Chemical PumpSiphon PumpsTire Sealant Pump

Push Type Grease Guns

CC 89

CC 27CC 99

CC 86CC 88CC 80CC 82CC 81CC 70CC 84

Measures

Needle Nose DispensersNozzles - Fuel Control - Manual

Oil CansOil Cans - SpecialityOil Control GunOil Control Gun AccessoriesOil Control Gun with Mechanical MeterOil Lube DispenserOil Spigot

M

N

O

Ordering Nr. Ordering Nr. Ordering Nr. Ordering Nr. Ordering Nr. Ordering Nr.Page Page Page Page Page Page

4142141422414234142441425414304143141432414334143441435416104161141612416134161441615

4181541816418204182141825418264190041901419024190341920419214192242220422214222242223

4222542226422274222842230422314223242233422404224142242422434224542246422474224842250

4225142252422534227242400424014240242420424214242242430424314243242440424414244242450

CC 86CC 86CC 86CC 86CC 86CC 86CC 86CC 86CC 86CC 86CC 86CC 86CC 86CC 86CC 86CC 86CC 86


CC 126

4120541206412074120841209412244122541226412274122941410414114141241413414144141541420

4162041621416224162341624416254163041631416324163341634416354180041801418024181041811






NUMERIC INDEX

4245142452424704247142472425004250142502425184252042521425224256042561425654256642580425854259042591425954259642600426014260242620426214262242700427014270242720427214272242750427514275242760427614276242785429004290142902429204292142922429504295142952429704297142972430004300143002430204302143022430404304143042430504305143052

4306143062430634307043071430724308043085430884309543096431004310143200432014320243250432514325243260432614326243300433014330243303433044330543320433214332243323433244332543360433614336243370433714338043381433854338943400434014340243403434044342043421434224342343424434504345143452434534345443460434614346243463434644346543466

4346743468434694347043471434724347343474435004350143502435104351143512435164351743520435214353043531435354353643537435404354143542435504356043561435624356543566435674357043572435744357643577435784357943581435824358343584435854358643600436014360243603436044360543606436104361143612436134361443615436164362043621436224362343624

4362543626436304363143640436414365043651436604366143670436714368043681436854368643687436884368943690437004373043731437404374143750437514376043761437704377143780437814380043801438024380343804438104381143812438134381443820438214382243823438244382543890438914390043901439024390343970439714397243973439764397743978439794398043981

4398243983439844398543986440004403044031440404404144042440434405044052440584405944075440764408044081440824408344084440864410044109441104411544120441254413044135441504416044168441694417044171441764417744178441794418044181441854418744190441914419244193441944419544197441984419944200442104421144212442154421644220442214422244230

4423144245442504425144280442814428244300443014430244303443044430544306443074430844309443104431144312443134432044321443224432344324443254432644329443304433144333443344433844338443504435144352443534436044361443684436944371443724437344374443754437744379443804438144382443834438444385443864438744388443904439144395443964439744398

CC 127

CC 10CC 10CC 10CC 10CC 10CC 09CC 09CC 09CC 22CC 09CC 09CC 09CC 09CC 09CC 09CC 09CC 09CC 09CC 09CC 09CC 09CC 09CC 08CC 08CC 08CC 08CC 08CC 08CC 07CC 07CC 07CC 07CC 07CC 07CC 07CC 07CC 07CC 07CC 07CC 07CC 07CC 11CC 11CC 11CC 11CC 11CC 11CC 16CC 16CC 16CC 16CC 16CC 16CC 15CC 15CC 15CC 15CC 15CC 15CC 14CC 14CC 14CC 15CC 15CC 15




CC 40CC 41CC 41CC 41CC 41CC 68CC 69CC 69CC 97CC 97CC 97CC 97CC 68CC 68CC 68CC 68CC74CC74CC 93CC 93CC 93CC 93CC 93CC 93CC 64CC 102CC 66CC 65CC 64CC 64CC 65CC 71CC 70CC 70CC 73CC 73CC 73CC 73CC 73CC 73CC 73CC 73CC 70CC 70CC 107CC 67CC 112CC 108CC 106CC 106CC 95CC 95CC 109CC 94CC 112CC 59CC 59CC 59CC 59CC 58CC 58CC 59CC 59CC 59CC 60

CC 60CC 60CC 55CC 55CC 57CC 57CC 57CC 75CC 75CC 75CC 75CC 75CC 75CC 75CC 75CC 75CC 75CC 75CC 75CC 75CC 75CC 61CC 61CC 61CC 61CC 61CC 61CC 61CC 61CC 61CC 61CC 61CC 61CC 93CC 95CC 84CC 84CC 84CC 84CC 62CC 62

CC 123CC 121CC 121CC 121CC 120CC 122CC 122CC 123CC 120CC 74CC 74CC 74CC 74CC 74

CC 120CC 124CC 124CC 74CC 98CC 98CC 98

CC 123CC 98

CC 121


NUMERIC INDEX

4440044401444024450044501445024451044520445214480044801448024480444809448104481144812448174482044821448224482344827448294483044831448334483444835448364483744838448394484044841448424484544847448484485044851448524485344854

4486044861448624487044871448724487544879448804488144882448854488644887448904489144892448934489444895449004490144902449034490444905449064490744908449094491044911449204492144922449504500045010450114501245030450344511045200

4520545250453104531145320453214532245323453244532545330453314533245333453344533545340453414534245343453444534545355453564538045381453824538545386453874539045391453924539345395453964539745398454004540145410454114541245415

4541645417454304543145550455514558045581455904559145601456134561445630456314563245700457014570245715457164600046002460034600546006460204602146022460234603046031460324603546037460404604146042460444604646070460714607246103

4610446105461064611346114461154611646117461184620046201462024622046221462224622346224462254623046231462324624046241462424630046302463044640046401464204642146422465004650146503465204652146522466004660146602466104661146612

CC 128

Whilst every effort has been made to ensure accuracy of information given in this catalogue at the time of going to print, September 2010, our policy of continuous improvement determines the right to change specifications without notice. Customers must ensure that goods are suitable for the purpose intended.

Imperial dimensions shown as equivalent to Metric sizes areapproximate, and vice versa.

466204663046640467004670146702535225352353524535255355153552600216007160211602616032260372604056045560700607016070260703607046100061001610026100361010610116101261013727807370173702737107371173712737207372173722

CC 39CC 39CC 39CC 42CC 42CC 42CC 24CC 24CC 24CC 24CC 25CC 25

CC 114CC 114CC 114CC 114CC 115CC 115CC 115CC 115CC 118CC 118CC 118CC 118CC 118CC 117CC 117CC 117CC 117CC 117CC 117CC 117CC 117CC 07CC 32CC 32CC 32CC 32CC 32CC 32CC 32CC 32

CC 110CC 110CC 110CC 104CC 104CC 104CC 105CC 111CC 111CC 35CC 35CC 35CC 35CC 35CC 34CC 34CC 34CC 35CC 35CC 35CC 35CC 35CC 35CC 35CC 36CC 36CC 36CC 36CC 36CC 36CC 36CC 36CC 36CC 29CC 29CC 29CC 37CC 37CC 37CC 27CC 27CC 27CC 27CC 27



CC 51CC 51CC 51CC 51CC 79CC 79CC 99CC 99CC 99CC 99

CC 101CC 101CC 101CC 100CC 100CC 100CC 81CC 81CC 81CC 80CC 80CC 38CC 38CC 38CC 38CC 38CC 39CC 39CC 39CC 39CC 38CC 38CC 38CC 38CC 38CC 38CC 38CC 38CC 38CC 38CC 39CC 39CC 39CC 38


slowly, weare turningwhite dotsto orange

at groz, we are constantly finding new ways to reach you faster.

if you still can’t find us, call us. we will fill some more orange

www.groz-tools.com +91.124.282.7700

LUB

RIC

AT

ION

EQ

UIP

ME

NT

CC

03B

Groz Engineering Tools (P) Ltd.Groz Net Industries

Village Kherki Daula, National Highway-8Gurgaon-122001, Haryana, INDIATEL +91.124.282.7700 / 221.4050FAX +91.124.2827986 / 221.4224FAX (USA) +1.509.271.7848FAX (UK) + 44.870.121.1854

E-MAIL [email protected] www.groz-tools.com

The Groz name, Groz logo and the mark are trademarks of Groz Engineering Tools (P) Ltd., India

Lubncation%20catalogue

Documents

Transcript of Lubncation%20catalogue