LTRT-32105 Mediant 3000

7/23/2019 LTRT-32105 Mediant 3000

http://slidepdf.com/reader/full/ltrt-32105-mediant-3000 1/469

OAM Guide for Mediant 3000

Version 6.2

Document #: LTRT-32105

7/23/2019 LTRT-32105 Mediant 3000


7/23/2019 LTRT-32105 Mediant 3000


Version 6.2 3 January 2011

OAM Guide Contents

Contents

1 Introduct ion ....................................................................................................... 15

2 Provisioning Parameters for the Mediant 3000 .............................................. 17

2.1 Frame: CLI Terminals Provisioning ....................................................... 18

2.1.1 Tab: CLI Terminals Provisioning .............................................................. 18

2.2 Frame: DS3 Parameters Provisioning ................................................... 21

2.2.1

Tab: DS3 General Info ............................................................................. 21

2.3 Frame: Media Provisioning (TP-6310) .................................................... 25

2.3.1

Tab: General Settings .............................................................................. 25

2.3.2

Tab: Voice Settings .................................................................................. 26

2.3.3 Tab: Caller ID Settings ............................................................................. 33

2.3.4 Tab: Bypass Settings ............................................................................... 34

2.3.5 Tab: FAX Settings .................................................................................... 37

2.3.6

Tab: Modem Settings ............................................................................... 39

2.3.7 Tab: In-Band-Signaling ............................................................................ 41

2.3.8

Tab: RTP Settings ................................................................................... 45

2.3.9

Tab: SRTP Settings ................................................................................. 50

2.3.10

Tab: Misc. Settings .................................................................................. 51

2.3.11

Tab: Media Realm ................................................................................... 52

2.4 Frame: Media Provisioning (TP-8410) .................................................... 54

2.4.1

Tab: General Settings .............................................................................. 54

2.4.2

Tab: Voice Settings .................................................................................. 55

2.4.3

Tab: Caller ID Settings ............................................................................. 63

2.4.4

Tab: Bypass Settings ............................................................................... 64

2.4.5

Tab: FAX Settings .................................................................................... 67 2.4.6

Tab: Modem Settings ............................................................................... 69

2.4.7

Tab: In-Band-Signaling ............................................................................ 71

2.4.8

Tab: RTP Settings ................................................................................... 75

2.4.9

Tab: SRTP Settings ................................................................................. 80

2.4.10

Tab: Media Server Settings ..................................................................... 82

2.4.11 Tab: Misc. Settings .................................................................................. 86

2.4.12

Tab: Video Settings ................................................................................. 87

2.5 Frame: Megaco Parameters Provisioning ............................................. 91

2.5.1

Tab: Megaco Settings .............................................................................. 91

2.5.2

Tab: Naming Convention ......................................................................... 94

2.5.3

Tab: Physical Endpoint Offsetting ............................................................ 96

2.5.4

Tab: RTP Endpoint Offsetting .................................................................. 97

2.5.5 Tab: Call Agent ........................................................................................ 97

2.5.6 Tab: Communication Info ......................................................................... 98

2.5.7

Tab: Media Settings ............................................................................... 101

2.5.8

Tab: Digit Settings ................................................................................. 103

2.6 Frame: MGCP Parameters Provisioning .............................................. 105

2.6.1

Tab: MGC Info ....................................................................................... 105

2.6.2

Tab: MGCs List ...................................................................................... 107

2.6.3

Tab: Call Managers Group .................................................................... 107

2.6.4

Tab: Naming Convention ....................................................................... 108

2.6.5

Tab: Communication Info ....................................................................... 109

2.6.6

Tab: Media Settings ............................................................................... 111

7/23/2019 LTRT-32105 Mediant 3000


OAM Guide 4 Document #: LTRT-32105

Mediant 3000

2.6.7

Tab: Digit Settings ................................................................................. 114

2.6.8

Tab: Misc. Settings ................................................................................ 116

2.7 Frame: MTP2 Profi le .............................................................................. 117

2.7.1

Tab: MTP2 Profile .................................................................................. 117

2.8 Frame: Network Parameters Provisioning (TP-6310) ......................... 120

2.8.1

Tab: IP Interface Status ......................................................................... 120

2.8.2

Tab: IP Interface Settings ...................................................................... 121

2.8.3

Tab: QoS Settings ................................................................................. 122

2.8.4

Tab: DNS Settings ................................................................................. 124

2.8.5

Tab: Static Routes ................................................................................. 125

2.8.6

Tab: SCTP ............................................................................................. 126

2.8.7

Tab: Ethernet Ports ................................................................................ 128

2.9 Frame: Network Parameters Provisioning (TP-8410) ......................... 129

2.9.1

Tab: IP Interface Status ......................................................................... 129

2.9.2

Tab: IP Interface Settings ...................................................................... 130

2.9.3

Tab: QoS Settings ................................................................................. 132

2.9.4

Tab: DNS Settings ................................................................................. 134 2.9.5

Tab: Static Routes ................................................................................. 134

2.9.6

Tab: SCTP ............................................................................................. 136

2.9.7

Tab: Ethernet Ports ................................................................................ 137

2.10 Frame: NFAS Parameters Provis ioning ............................................... 139

2.10.1

Tab: NFAS Setting ................................................................................. 139

2.11 Frame: Security Provisioning ............................................................... 140

2.11.1

Tab: IPSec Proposal .............................................................................. 140

2.11.2

Tab: IPSec SA ....................................................................................... 141

2.11.3

Tab: Firewall Settings ............................................................................ 143

2.12 Frame: SIP Advanced Configuration ................................................... 145

2.12.1

Tab: General Features 1 ........................................................................ 145

2.12.2

Tab: General Features 2 ........................................................................ 151

2.12.3 Tab: Transport Info ................................................................................ 160

2.12.4 Tab: Tones And Progress ...................................................................... 160

2.12.5 Tab: Digital Settings ............................................................................... 163

2.12.6 Tab: Voice Mail ...................................................................................... 167

2.12.7

Tab: SIP to ISDN Cause Mapping ......................................................... 170

2.12.8

Tab: ISDN to SIP Cause Mapping ......................................................... 171

2.12.9

Tab: Debug ............................................................................................ 172

2.12.10

Tab: MLPP ............................................................................................. 173

2.12.11

Tab: LDAP Settings ............................................................................... 175

2.12.12

Tab: IP Media AMD ............................................................................... 176

2.13 Frame: SIP Coder Group 1 Provisioning ............................................. 179

2.13.1

Tab: General Settings ............................................................................ 179


2.14.1



2.15.1



2.16.1 Tab: General Settings ............................................................................ 183

2.17 Frame: SIP Coder Provisioning ............................................................ 185

2.17.1


7/23/2019 LTRT-32105 Mediant 3000



OAM Guide Contents

2.18 Frame: SIP Endpoints ........................................................................... 186

2.18.1

Tab: Phones .......................................................................................... 186

2.18.2

Tab: Account .......................................................................................... 187

2.18.3

Tab: IP Group ........................................................................................ 188

2.19 Frame: SIP Manipulations ..................................................................... 190

2.19.1

Tab: Definitions ...................................................................................... 190 2.19.2

Tab: Destination IP to Telcom ............................................................... 194

2.19.3

Tab: Destination Telcom to IP ............................................................... 196

2.19.4

Tab: Source IP to Telcom ...................................................................... 198

2.19.5

Tab: Source Telcom to IP ...................................................................... 201

2.19.6

Tab: Phone Context ............................................................................... 203

2.19.7

Tab: Redirect Number Map Ip to Tel ..................................................... 204

2.19.8

Tab: Redirect Number Map Tel to IP ..................................................... 206

2.20 Frame: SIP Networking ......................................................................... 209

2.20.1

Tab: SRD Table ..................................................................................... 209

2.20.2

Tab: SIP Interfaces ................................................................................ 210

2.21

Frame: SIP Protocol Definitions ........................................................... 211

2.21.1

Tab: General Info ................................................................................... 211

2.21.2

Tab: Proxy Server .................................................................................. 214

2.21.3

Tab: Proxy Set ....................................................................................... 217

2.21.4

Tab: Registration ................................................................................... 218

2.21.5 Tab: Coders Group 0 ............................................................................. 219

2.21.6 Tab: DTMF ............................................................................................. 221

2.21.7

Tab: Sup Services ................................................................................. 222

2.21.8

Tab: Authentication And Security .......................................................... 225

2.21.9

Tab: Media Realm ................................................................................. 228

2.21.10

Tab: Coders Group 1 ............................................................................. 229

2.21.11

Tab: Coders Group 2 ............................................................................. 231

2.21.12

Tab: Coders Group 3 ............................................................................. 233

2.21.13

Tab: Coders Group 4 ............................................................................. 235

2.21.14

Tab: IP Profile ........................................................................................ 237

2.21.15

Tab: Telephony Profile ........................................................................... 241

2.22 Frame: SIP Rout ing ............................................................................... 246

2.22.1

Tab: Route Modes ................................................................................. 246

2.22.2

Tab: Tel to IP ......................................................................................... 248

2.22.3

Tab: IP to Hunt ....................................................................................... 249

2.22.4

Tab: Hunt Group .................................................................................... 251

2.22.5

Tab: DNS Information ............................................................................ 252

2.22.6

Tab: SRV Information ............................................................................ 253

2.22.7

Tab: Alt Route Cause IP to Tel .............................................................. 255 2.22.8

Tab: Alt Route Cause Tel to IP .............................................................. 255

2.22.9

Tab: Forward On Busy Trunk Destination ............................................. 256

2.23 Frame: Snmp Provisioning ................................................................... 257

2.23.1

Tab: SNMP Managers Table ................................................................. 257

2.23.2

Tab: SNMPv3 Users .............................................................................. 258

2.24 Frame: Sonet/SDH Parameters Provisioning ...................................... 261

2.24.1

Tab: Sonet/SDH General Info ................................................................ 261

2.25 Frame: SS7 Al ias Point Code ............................................................... 263

2.25.1

Tab: SS7 Alias Point Code .................................................................... 263

2.26

Frame: SS7 Data Link ............................................................................ 264 2.26.1

Tab: Data Link General Info ................................................................... 264

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.26.2

Tab: Data Link TDM ............................................................................... 265

2.26.3

Tab: Data Link UAL ............................................................................... 266

2.26.4

Tab: Data Link Tunneling ....................................................................... 266

2.27 Frame: SS7 L ink Set .............................................................................. 268

2.27.1

Tab: SS7 Linkset ................................................................................... 268

2.28

Frame: SS7 Linkset Link ....................................................................... 269

2.28.1

Tab: SS7 Linkset Link ............................................................................ 269

2.29 Frame: SS7 Linkset Timers................................................................... 269

2.29.1

Tab: SS7 Linkset Profiles ...................................................................... 269

2.30

Frame: SS7 Node ................................................................................... 271

2.30.1

Tab: SS7 Node ...................................................................................... 271

2.31

Frame: SS7 Node Redundancy Common Parameters Frame ............ 273

2.31.1

Tab: SS7 Redundancy Common ........................................................... 273

2.32 Frame: SS7 Node Timers ...................................................................... 275

2.32.1 Tab: SS7 Node Profiles ......................................................................... 275

2.33

Frame: SS7 Redundancy ...................................................................... 278

2.33.1

Tab: SS7 Node Redundancy ................................................................. 278

2.34 Frame: SS7 Route Frame ...................................................................... 278

2.34.1

Tab: SS7 Route ..................................................................................... 278

2.35 Frame: SS7 Routeset ............................................................................ 279

2.35.1

Tab: SS7 Route Set ............................................................................... 279

2.36 Frame: SS7 Routing Context ................................................................ 280

2.36.1

Tab: SS7 Routing Context ..................................................................... 280

2.37 Frame: System Setting (TP-8410) ......................................................... 282

2.37.1

Tab: Diagnostics .................................................................................... 282

2.37.2

Tab: Application Settings ....................................................................... 283

2.37.3

Tab: NFS Settings ................................................................................. 287

2.37.4

Tab: Security Settings ............................................................................ 289

2.37.5

Tab: License .......................................................................................... 292

2.38 Frame: System Setting Provisioning (TP-6310) .................................. 292

2.38.1

Tab: Diagnostics .................................................................................... 292

2.38.2

Tab: Application Settings ....................................................................... 294

2.38.3

Tab: NFS Settings ................................................................................. 298

2.38.4

Tab: Security Settings ............................................................................ 299

2.38.5

Tab: License .......................................................................................... 302

2.39 Frame: System Settings Parameters (TP-6310) .................................. 302

2.39.1

Tab: General Info ................................................................................... 302

2.40 Frame: System Settings Parameters (TP-8410) .................................. 303

2.40.1

Tab: General Info ................................................................................... 303

2.41 Frame: TDM Parameters Provisioning (TP-6310) ................................ 303

2.41.1

Tab: TDM ............................................................................................... 303

2.41.2

Tab: Digital PCM Settings ...................................................................... 305

2.41.3

Tab: System Timing ............................................................................... 306

2.42 Frame: TDM Parameters Provisioning (TP-8410) ................................ 309

2.42.1

Tab: TDM ............................................................................................... 309

2.42.2

Tab: Digital PCM Settings ...................................................................... 310

2.42.3

Tab: System Timing ............................................................................... 311

7/23/2019 LTRT-32105 Mediant 3000



OAM Guide Contents

2.43 Frame: Trunk Parameters Provisioning (TP-6310) ............................. 316

2.43.1


2.43.2

Tab: ISDN Settings ................................................................................ 320

2.43.3

Tab: Line Settings .................................................................................. 324

2.43.4

Tab: CAS Settings ................................................................................. 325

2.44

Frame: Trunk Parameters Provisioning (TP-8410) ............................. 326 2.44.1


2.44.2


2.44.3


2.44.4

Tab: CAS Settings ................................................................................. 336

2.45 Frame: Trunk SIP Provisioning (TP-6310) ........................................... 337

2.45.1


2.45.2


2.45.3


2.45.4

Tab: CAS Settings ................................................................................. 345

2.45.5

Tab: SIP Settings ................................................................................... 345

2.46

Frame: Trunk SIP Provisioning (TP-8410) ........................................... 348

2.46.1


2.46.2


2.46.3


2.46.4

Tab: CAS Settings ................................................................................. 357

2.46.5 Tab: SIP Settings ................................................................................... 358

2.47 Frame: UAL Group ................................................................................ 360

2.47.1

Tab: General Info ................................................................................... 360

2.48 Frame: UAL Interface ............................................................................ 363

2.48.1

Tab: UAL Interface ................................................................................. 363

2.49 Frame: V5.2 Interface Frame................................................................. 364

2.49.1


2.50 Frame: V5.2 Link Frame ........................................................................ 367

2.50.1


2.51 Frame: Web Provisioning ..................................................................... 368

2.51.1

Tab: Access Settings ............................................................................. 368

2.51.2

Tab: Access Addresses ......................................................................... 370

3 Performance Monitoring Parameters for the Mediant 3000 ......................... 371

3.1

Frame: DS3 Monitoring (History) ......................................................... 372

3.1.1 Tab: DS3 Statistics ................................................................................ 372

3.2

Frame: DS3 Monitoring (Real-Time) ..................................................... 373

3.2.1 Tab: DS3 Statistics ................................................................................ 373

3.3 Frame: Fiber Group Monitoring (Real-Time) ....................................... 374

3.3.1

Tab: Fiber Group Statistics .................................................................... 374

3.4 Frame: Gateway System Monitor ing (Configuration) ......................... 375

3.4.1

Tab: System IP ...................................................................................... 375

3.4.2

Tab: VoP Call Statistics ......................................................................... 376

3.4.3 Tab: Common Control ........................................................................... 378

3.4.4 Tab: MEGACO Control .......................................................................... 379

3.4.5 Tab: MGCP Control ............................................................................... 381

3.4.6

Tab: SIP IP to Tel .................................................................................. 383

3.4.7

Tab: SIP Tel to IP .................................................................................. 384

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

3.4.8

Tab: Trunk Statistics .............................................................................. 385

3.4.9

Tab: SS7 Linkset ................................................................................... 386

3.4.10

Tab: SS7 Link ........................................................................................ 386

3.5 Frame: Gateway System Monitoring (History) .................................... 387

3.5.1

Tab: System IP ...................................................................................... 387

3.5.2

Tab: VoP Call Statistics ......................................................................... 387 3.5.3

Tab: Common Control ........................................................................... 390

3.5.4

Tab: MEGACO Control .......................................................................... 391

3.5.5

Tab: MGCP Control ............................................................................... 393

3.5.6

Tab: SIP IP to Tel .................................................................................. 395

3.5.7

Tab: SIP Tel to IP .................................................................................. 396

3.6 Frame: Gateway System Monitor ing (Real-Time) ............................... 397

3.6.1

Tab: System IP ...................................................................................... 397

3.6.2

Tab: VoP Call Statistics ......................................................................... 398

3.6.3 Tab: Common Control ........................................................................... 399

3.6.4 Tab: MEGACO Control .......................................................................... 399

3.6.5

Tab: MGCP Control ............................................................................... 401

3.6.6

Tab: SIP IP to Tel .................................................................................. 403

3.6.7

Tab: SIP Tel to IP .................................................................................. 404

3.7 Frame: SS7 Link Monitoring (History) ................................................. 405

3.7.1 Tab: SS7 Link Statistics ......................................................................... 405

3.8 Frame: SS7 Link Monitoring (Real-Time)............................................. 406

3.8.1 Tab: SS7 Link Statistics ......................................................................... 406

3.9 Frame: SS7 Linkset Monitoring (History) ............................................ 406

3.9.1

Tab: SS7 Linkset Statistics .................................................................... 406

3.10 Frame: SS7 Node Monitoring (Real-Time) ........................................... 407

3.10.1

Tab: SS7 Node Statistics ....................................................................... 407

3.11

Frame: Trunk Monitoring (History) ...................................................... 407

3.11.1

Tab: Trunk Performance ........................................................................ 407

3.12 Frame: Trunk Monitoring (Real-Time) .................................................. 408

3.12.1

Tab: Trunk Performance ........................................................................ 408

4 Mediant 3000 Alarm Guide ............................................................................. 409

4.1 Standard Traps ...................................................................................... 410

4.1.1

Cold Start ............................................................................................... 410

4.1.2

Link Down .............................................................................................. 411

4.1.3

Link Up ................................................................................................... 411

4.1.4

Entity Configuration Change .................................................................. 412 4.1.5

Authentication Failure ............................................................................ 412

4.1.6

DS1 Line Status ..................................................................................... 413

4.1.7

DS3 Line Status ..................................................................................... 415

4.2 EMS Alarms ............................................................................................ 416

4.2.1

EMS Trap Receiver Binding Error ........................................................ 416

4.2.2

GW Connection Alarm .......................................................................... 417

4.2.3

GW Mismatch Alarm ............................................................................. 418

4.2.4

EMS Server Started ............................................................................... 419

4.2.5

Disk Space Alarm .................................................................................. 420

4.2.6

Software Replaced ................................................................................ 420

4.2.7

Hardware Replaced ............................................................................... 421

4.2.8

HTTP/HTTPS Access Disabled ............................................................. 421

7/23/2019 LTRT-32105 Mediant 3000



OAM Guide Contents

4.2.9

PM File Generated ................................................................................. 422

4.2.10

PM Polling Error ..................................................................................... 423

4.2.11

Cold Start Missed .................................................................................. 424

4.2.12

Security Alarm ....................................................................................... 424

4.2.13

Security Event ........................................................................................ 425

4.2.14 Topology Update Event ......................................................................... 425

4.2.15

Topology File Event ............................................................................... 427

4.2.16

Synchronizing Alarms Event .................................................................. 428

4.2.17

Synchronizing Active Alarms Event ....................................................... 429

4.2.18

License Key Alarm ................................................................................. 430

4.3 Mediant 3000 Alarms ............................................................................. 431

4.3.1 Board Fatal Error ................................................................................... 431

4.3.2 Configuration Error ................................................................................ 431

4.3.3 Temperature Alarm ................................................................................ 432

4.3.4

Initialization Ended ................................................................................. 433

4.3.5

Board Resetting Following Software Reset ........................................... 433

4.3.6

Feature Key Related Error ..................................................................... 434

4.3.7

Gateway Administrative State Changed ................................................ 434

4.3.8

No Free Channels Available .................................................................. 435

4.3.9

Gatekeeper/Proxy not Found or Registration Failed ............................. 435

4.3.10

Ethernet Link Down Alarm ..................................................................... 436

4.3.11

System Component Overloaded ............................................................ 437

4.3.12

Active Alarms Table Overflow ................................................................ 437

4.3.13

Audio Provisioning Alarm ....................................................................... 438

4.3.14

Operational State Change ..................................................................... 438

4.3.15

Keep Alive Trap ..................................................................................... 439

4.3.16

NAT Traversal Alarm ............................................................................. 440

4.3.17

SS7 Link State Change Alarm ............................................................... 440

4.3.18 SS7 Link Inhibit State Change Alarm .................................................... 441

4.3.19

SS7 Link Congestion State Change Alarm ............................................ 442

4.3.20

SS7 Linkset State Change Alarm .......................................................... 443

4.3.21

SS7 Routeset State Change Alarm ....................................................... 443

4.3.22

SS7 Node State Change Alarm ............................................................. 444

4.3.23

Threshold of Performance Monitored Object Exceeded ........................ 444

4.3.24

HTTP Download Result ......................................................................... 445

4.3.25

Fan Tray Alarm ...................................................................................... 445

4.3.26

Power Supply Alarm .............................................................................. 446

4.3.27

PEM Module Alarm ................................................................................ 446

4.3.28

SA Module Missing Alarm ...................................................................... 447

4.3.29

HA System Fault Alarm ......................................................................... 447

4.3.30

HA System Configuration Mismatch Alarm ............................................ 448

4.3.31

HA System Switch Over Alarm .............................................................. 448

4.3.32

User Input Alarm .................................................................................... 449

4.3.33

D-Channel Status .................................................................................. 449

4.3.34 SONET Section LOF Alarm ................................................................... 450

4.3.35

SONET Section LOS Alarm................................................................... 450

4.3.36

SONET Line AIS Alarm ......................................................................... 451

4.3.37

SONET Line RDI Alarm ......................................................................... 451

4.3.38

SONET/SDN IF Failure Alarm ............................................................... 452

4.3.39

H.248 Lost Connection with CA ............................................................. 452

4.3.40

Hitless Update Event ............................................................................. 453

4.3.41

Trunk LOS Alarm ................................................................................... 454

4.3.42

Trunk LOF Alarm ................................................................................... 454 4.3.43

Trunk AIS Alarm .................................................................................... 455

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.44

Trunk RAI Alarm .................................................................................... 455

4.3.45

TM Inconsistency ................................................................................... 456

4.3.46

TM Reference Status ............................................................................. 457

4.3.47

TM Reference Change .......................................................................... 458

4.3.48

V5.2 Interface Alarm .............................................................................. 459

4.3.49 IPv6 ........................................................................................................ 460

4.3.50

SONET Path STS LOP Alarm ............................................................... 460

4.3.51

SONET Path STS AIS Alarm ................................................................. 461

4.3.52

SONET Path STS RDI Alarm ................................................................ 462

4.3.53

SONET Path Unequipped Alarm ........................................................... 462

4.3.54

SONET Path Signal Label Alarm ........................................................... 463

4.3.55

DS3 RAI Alarm ...................................................................................... 463

4.3.56

DS3 AIS Alarm ....................................................................................... 464

4.3.57

DS3 LOF Alarm ..................................................................................... 464

4.3.58

DS3 LOS Alarm ..................................................................................... 465

4.3.59

Software Upgrade Alarm ....................................................................... 465

4.3.60

NTP Server Status Alarm ...................................................................... 466

4.3.61

SS7 Alias PC State Change Alarm ........................................................ 466

4.3.62

SS7 UAL Group State Change Alarm .................................................... 467

4.3.63

SSH Connection Status ......................................................................... 467

4.3.64

LDAP Lost Connection .......................................................................... 468

4.3.65

OCSP Server Status Alarm ................................................................... 468

7/23/2019 LTRT-32105 Mediant 3000



OAM Guide Notices

Notice

This document describes the Provisioning parameters, PerformanceMonitoring parameters and alarms of the Mediant 3000 product.

Information contained in this document is believed to be accurate and reliableat the time of printing. However, due to ongoing product improvements andrevisions, AudioCodes cannot guarantee accuracy of printed material after theDate Published nor can it accept responsibility for errors or omissions. Updatesto this document and other documents can be viewed by registered customershttp://www.audiocodes.com/downloads.

© 2010 AudioCodes Inc. All rights reservedThis document is subject to change without notice.

Date Published: 30-December-2010

Note: The Element Management System supports the following products:

• Mediant 600/1000/2000/3000/5000/8000 Media Gateways.

• Mediant 1000 MSBG Media Gateway

• Mediant 800 MSBG Media Gateway

• MediaPack Media Gateways MP-112 (FXS), MP-114 (FXS and FXO),MP-118 (FXS and FXO), MP-124 (FXS) collectively referred to asMediaPack.

Trademarks

AudioCodes, AC, AudioCoded, Ardito, CTI2, CTI², CTI Squared, HD VoIP, HD VoIPSounds Better, InTouch, IPmedia, Mediant, MediaPack, NetCoder, Netrake, Nuera,Open Solutions Network, OSN, Stretto, TrunkPack, VMAS, VoicePacketizer,VoIPerfect, VoIPerfectHD, What’s Inside Matters, Your Gateway To VoIP and 3GX aretrademarks or registered trademarks of AudioCodes Limited. All other products ortrademarks are property of their respective owners.

WEEE EU Directive

Pursuant to the WEEE EU Directive, electronic and electrical waste must not bedisposed of with unsorted waste. Please contact your local recycling authority fordisposal of this product.

http://www.audiocodes.com/downloads


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

Customer Support

Customer technical support and service are provided by AudioCodes’ Distributors,Partners, and Resellers from whom the product was purchased. For Customer supportfor products purchased directly from AudioCodes, contacthttp://www.audiocodes.com/downloads.

Abbreviations and Terminology

Each abbreviation, unless widely used, is spelled out in full when first used. Onlyindustry-standard terms are used throughout this manual. Hexadecimal notation isindicated by 0x preceding the number.

When the term ‘Trunking Gateway’ is used in this manual, it refers to the Mediant5000 Media Gateway and Mediant 8000 Media Gateway.

When ‘MG’ is used in this manual, it refers to ‘media gateway’.

MediaPack collectively refers to the MP-102 (FXS), MP-104 (FXS and FXO), MP-108(FXS and FXO), MP-112 (FXS), MP-114 (FXS), MP-118 (FXS) and MP-124 (FXS).

'CPE' (Customer Premises Equipment) refers to the Mediant 600, Mediant 800 and1000 MSBG, Mediant 1000 / 2000 / 3000 Media Gateways and the MediaPack MediaGateways.

The term 'DS3' is synonymous with the term 'T3'.

The terms ‘frame’ and ‘screen’ are sometimes used interchangeably.



7/23/2019 LTRT-32105 Mediant 3000



OAM Guide Notices

Related Documentation

Manual Name

Mediant 5000 / 8000 Media Gateway Installation, Operation & Maintenance Manual

Mediant 5000 / 8000 Media Gateway Release Notes

Mediant 3000 User’s Manual

Mediant 2000 User’s Manual

Mediant 800 MSBG Installation Manual

Mediant 1000 MSBG User’s Manual

Mediant 1000 and Mediant 600 User's Manual

MediaPack User’s Manual

Element Management System (EMS) Server Installation & Maintenance Manual

Element Management System (EMS) User’s Manual

Element Management System (EMS) Product Description

Element Management System (EMS) Release Notes

Mediant 5000 / 8000 Media Gateway Programmer's User Manual

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

Reader’s Notes

7/23/2019 LTRT-32105 Mediant 3000



OAM Guide 1. Introduction

1 Introduction

This document provides a description of the Element Management System (EMS)provisioning and performance monitoring parameters as well as alarm traps forAudioCodes' Mediant 3000 Voice-over-IP (VoIP) Session Internet Protocol (SIP),MGCP, and MEGACO media gateway. The parameters are organized in thisdocument according to the frames and tabs in which they appear in the EMS graphicaluser interface (GUI).

Throughout this manual, parameters enclosed in square brackets [] indicate the EMSparameters' corresponding ini file parameters. A parameter written without squarebrackets depicts the parameter as it appears in the EMS.

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

Reader’s Notes

7/23/2019 LTRT-32105 Mediant 3000



OAM Guide 2. Provisioning Parameters for the Mediant 3000

2 Provisioning Parameters for the

Mediant 3000The following tables can be used as a reference for the screens, tabs and parametersdisplayed in the EMS GUI.

Note that with regard to the column ‘Type’ in the tables in this section, the first lineindicates whether the parameter is an integer, string or enumerator. The lines below itindicate the range / possible values that can be configured for the parameter.

Note that all parameters that are of provisioning type Offline (in column 'Provisioning

Type') are graphically indicated in the EMS GUI screens by the icon .

Online To configure an ‘Online’ mode parameter (indicated in the EMS by the iconadjacent to the parameter), you need to lock only the entity containing the parameter .

You do not need to lock the board/media gateway containing the entity. The mode iscalled ‘Online’ because the parameter can be configured without resetting any boardin the media gateway.

Offline To configure an ‘Offline’ mode parameter (indicated in the EMS by the iconadjacent to the parameter), you need to lock the board/media gateway containing theentity as well as the entity in order to configure the entity’s parameter. The mode iscalled ‘Offline’ because all calls active on the board/media gateway containing theentity’s parameter are dropped when you lock the board/media gateway and entity inorder to configure the parameter.

Instant An ‘Instant’ mode parameter can be configured on the fly; the configuration takeseffect immediately. No icon is displayed adjacent to the parameter in the EMS GUI.No locking or unlocking of the entity or of the board/media gateway is required toperform the configuration.

Offline_create ‘Offline_create’ will sometimes appear as ‘Online’ and at other times as ‘Offline’,depending on the user’s specific configuration.

Instant_apply From the EMS user’s point of view, ‘Instant_apply’ is identical to ‘Instant’.

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.1 Frame: CLI Terminals Provisioning

2.1.1 Tab: CLI Terminals Provisioning

Frame: CLI Terminals Provisioning, Tab: CLI Terminals Provisioning

ParameterName

Type ProvisioningType

DefaultValue

Description

Telnet & SSH

ServerEnable

Enum:disable(0),

enable(1), ssl(2)

Instant 0 Enables or disables the embedded Telnetserver. Telnet is disabled by default forsecurity reasons.0 = Disable

1= Enable2 = SSL mode (if available - requires anSSL-aware Telnet client software)SSL mode is not available on the MP-108 /MP-124 media gatewaysMib name: acSysTelnetServerEnableINI Name: TELNETSERVERENABLEProfile name: CLI Terminals Profile

Server Port Integer0-65535

Online 23 Defines the port number for the embeddedTelnet server.Range = Valid port numberMib name: acSysTelnetServerPortINI Name: TELNETSERVERPORTProfile name: CLI Terminals Profile

Server IdleDisconnect

Integer0-2147483647

Offline 0 This parameter is used to set the timeoutfor disconnection of an idle Telnet session(minutes). When set to zero, idle sessionsare not disconnected.

Range: Any numberMib name:acSysTelnetServerIdleDisconnectINI Name:TELNETSERVERIDLEDISCONNECTProfile name: CLI Terminals Profile

SSH ServerPort

Integer0-65535

Online 22 Defines the port number for the embeddedSSH server.Range = Valid port numberMib name: acSysTelnetSSHServerPortINI Name: SSHSERVERPORTProfile name: CLI Terminals Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

SSH ServerEnable

Enum:Disable(0),Enable(1)

Online 0 Enables or disables the embedded SSHserver.0 = Disable

1= Enable

Mib name: acSysTelnetSSHServerEnableINI Name: SSHSERVERENABLEProfile name: CLI Terminals Profile

SSH AdminKey

StringUp to 510 chars.

Instant This parameter holds an RSA public key forstrong authentication to the SSH interface(if enabled).The value should be a base64-encodedstring; see the Security appendix foradditional information.Mib name: acSysTelnetSSHAdminKey

INI Name: SSHADMINKEYProfile name: CLI Terminals Profile

SSH RequirePublic Key


Instant 0 Enables or disables RSA public keys inSSH.When set to 0, RSA public keys are optional(if SSHAdminKey is set).When set to 1, RSA public keys aremandatory.Mib name:acSysTelnetSSHRequirePublicKeyINI Name: SSHREQUIREPUBLICKEYProfile name: CLI Terminals Profile

Telnet SSHMax

Sessions

Integer1-2

Online 2 Configure maximum allowed number ofSSH sessions.Mib name: acSysTelnetSSHMaxSessionsINI Name: SSHMAXSESSIONSProfile name: CLI Terminals Profile

SSH MaxPayload Size

Integer550-32768

Online 32768 Configure maximum uncompressedpayload size for SSH packets, in bytes.Mib name:acSysTelnetSSHMaxPayloadSizeINI Name: SSHMAXPAYLOADSIZEProfile name: CLI Terminals Profile

SSH MaxBinary Packet

Size

Integer582-35000

Online 35000 Configure maximum packet size for SSHpackets, in bytes.Mib name:acSysTelnetSSHMaxBinaryPacketSizeINI Name: SSHMAXBINARYPACKETSIZEProfile name: CLI Terminals Profile

Serial IF

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Baud Rate Integer0-115200

Offline 9600 Enables changes to the Serial Baud Ratefor Simplified Message Desk Interface(SMDI).

Range = Any value accepted.Recommended standard values: 1200,2400, 9600, 14400, 19200, 38400, 57600,115200.Mib name: acSysSerialIFBaudRateINI Name: SERIALBAUDRATEProfile name: CLI Terminals Profile

Data Integer7-8

Offline 8 Changes the serial data bit for theSimplified Message Desk Interface (SMDI).

7 = 7 Bit

8 = 8 BitMib name: acSysSerialIFDataINI Name: SERIALDATAProfile name: CLI Terminals Profile

Parity Enum:none(0), odd(1),

even(2)

Offline 0 Changes the serial parity for the SimplifiedMessage Desk Interface (SMDI).

0 = None1 = Odd2 = EvenMib name: acSysSerialIFParityINI Name: SERIALPARITY

Profile name: CLI Terminals ProfileStop Integer

1-2Offline 1 Changes the serial stop for the Simplified

Message Desk Interface (SMDI).

1 = 1 Bit2 = 2 BitMib name: acSysSerialIFStopINI Name: SERIALSTOPProfile name: CLI Terminals Profile

Flow Control Enum:none(0),

hardware(1)

Offline 0 Changes the serial flow control for theSimplified Message Desk Interface (SMDI).

0 = None1 = HardwareMib name: acSysSerialIFFlowControlINI Name: SERIALFLOWCONTROLProfile name: CLI Terminals Profile

7/23/2019 LTRT-32105 Mediant 3000




2.2 Frame: DS3 Parameters Provisioning

2.2.1 Tab: DS3 General Info

Frame: DS3 Parameters Provisioning, Tab: DS3 General Info

ParameterName


DefaultValue

Description

DS3 Line Type Enum:DS3M23(2),

DS3CbitParity(4)

Instant 2 This variable indicates the variety of DS3C-bitor E3 application implementing thisinterface.The type of interface affects theinterpretation ofthe usage and error statistics. The rate of

DS3is 44.736 Mbps and E3 is 34.368 Mbps.The dsx3ClearChannel value means thatthe C-bits arenot used except for sending/receiving AIS.The values, in sequence, describe:

TITLE: SPECIFICATION:dsx3M23 ANSI T1.107-1988dsx3SYNTRAN ANSI T1.107-1988dsx3CbitParity ANSI T1.107a-1990dsx3ClearChannel ANSI T1.102-1987e3Framed CCITT G.751

e3Plcp ETSI T/NA(91)18dsx3M13 ANSI T1.107a-1990.Mib name: dsx3LineTypeProfile name: Digital DS3 Profile

DS3 LineCoding

Enum:DS3B3ZS(2)

Instant 2 This variable describes the variety of ZeroCodeSuppression used on this interface, whichin turnaffects a number of its characteristics.dsx3B3ZS and e3HDB3 refer to the use ofspecifiedpatterns of normal bits and bipolar

violationswhich are used to replace sequences ofzero bitsof a specified length.Mib name: dsx3LineCodingProfile name: Digital DS3 Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

DS3 SendCode

Enum:DS3SendNoCode(1)

Instant 1 This variable indicates what type of code isbeing sent across the DS3/E3 interface bythe

device. (These are optional for E3interfaces.)Setting this variable causes the interface tobegin sending the code requested.The values mean:

dsx3SendNoCodesending looped or normal data

dsx3SendLineCodesending a request for a line loopback

dsx3SendPayloadCodesending a request for a payload loopback(i.e., all DS1/E1s in a DS3/E3 frame)

dsx3SendResetCodesending a loopback deactivation request

dsx3SendDS1LoopCoderequesting to loopback a particular DS1/E1within a DS3/E3 frame. The DS1/E1 isindicated in dsx3Ds1ForRemoteLoop.

dsx3SendTestPatternsending a test patternMib name: dsx3SendCodeProfile name: Digital DS3 Profile

DS3 CircuitIdentifier

StringUp to 255 chars

Instant 1 This variable contains the transmissionvendor'scircuit identifier, for the purpose offacilitating troubleshooting.Mib name: dsx3CircuitIdentifierProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

DS3 LoopbackConfig

Enum:DS3NoLoop(1),

DS3LineLoop(3),

DS3InwardLoop(5)

Instant 1 This variable represents the desiredloopbackconfiguration of the DS3/E3 interface.

The values mean:

dsx3NoLoopNot in the loopback state. A device that isnot capable of performing a loopback onthe interface shall always return this asits value.

dsx3PayloadLoopThe received signal at this interface isloopedthrough the device. Typically the receivedsignalis looped back for retransmission after ithaspassed through the device's framingfunction.

dsx3LineLoopThe received signal at this interface doesnotgo through the device (minimumpenetration) butis looped back out.

dsx3OtherLoopLoopbacks that are not defined here.

dsx3InwardLoopThe sent signal at this interface is loopedbackthrough the device.

dsx3DualLoopBoth dsx1LineLoop and dsx1InwardLoopwill beactive simultaneously.Mib name: dsx3LoopbackConfig

Profile name: Digital DS3 Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

DS3 TransmitClock Source

Enum:LOOP_TIMING(1),LOCAL_TIMING(2)

Instant 1 The source of Transmit Clock.

loopTiming indicates that the recovered

receiveclock is used as the transmit clock.

localTiming indicates that a local clocksource isused or that an external clock is attachedto thebox containing the interface.

throughTiming indicates that transmit clockisderived from the recovered receive clock of another DS3 interface.Mib name: dsx3TransmitClockSourceProfile name: Digital DS3 Profile

DS3 LineLength

Integer0-64000

Instant 1 The length of the ds3 line in meters.This object provides information for linebuild outcircuitry if it exists and can use this objecttoadjust the line build out.Mib name: dsx3LineLengthProfile name: Digital DS3 Profile

DS3 Line

Status ChangeTrap Enable

Enum:

ENABLED(1),DISABLED(2)

Instant 1 Indicates whether dsx3LineStatusChange

traps should be generated for thisinterface.Mib name:dsx3LineStatusChangeTrapEnableProfile name: Digital DS3 Profile

DS3Channelization

Enum:DISABLED_DS1(2)

Instant 2 Indicates whether this ds3/e3 ischannelized or unchannelized.The value of enabledDs1 indicates that thisis a DS3 channelized into DS1s.The value of enabledDs3 indicated thatthis is a DS3 channelized into DS2s.Setting this object will cause the creationor deletion of DS2 or DS1

entries in the ifTable.Mib name: dsx3ChannelizationProfile name: Digital DS3 Profile

DS3 Ds1 ForRemote Loop

Integer0-29

Read-Only 1 Indicates which DS1/E1 on this DS3/E3will be indicatedin the remote ds1 loopback request.A value of 0 means no DS1 will be looped.A value of 29 means all DS1s/E1s will belooped.Mib name: dsx3Ds1ForRemoteLoopProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.3 Frame: Media Provisioning (TP-6310)

2.3.1 Tab: General Settings

Frame: Media Provis ioning (TP-6310), Tab: General Settings

ParameterName


DefaultValue

Descript ion

Index Integer0-1

NA 0 Entry number in the table.Mib name: acMediaDspIndexINI Name: DSPTEMPLATES_INDEXProfile name: Not Profiled

MediaAggregation

Row Status Enum: NA 0 ROWSTATUS field for line. Internal parameter.Mib name: acMediaDspRowStatusProfile name: Digital VoP Media DSP Table Profile

RemoteBase UDP

Port

Integer0-65535

Offline 0 Remote Base UDP Port For AggrigationMib name:acMediaAggregationRemoteBaseUDPPortINI Name: REMOTEBASEUDPPORTProfile name: Digital VoP Media Profile

TemplateNumber

Integer0-8

Offline 0 DSP template number.Mib name: acMediaDspTemplateNumberINI Name:DSPTEMPLATES_DSPTEMPLATENUMBERProfile name: Digital VoP Media DSP Table Profile

DSP

ResourcesPercentage

Integer0-100

Offline 0 Percentage use for the specified template.Mib name: acMediaDspResourcesPercentageINI Name:DSPTEMPLATES_DSPRESOURCESPERCENTAGEProfile name: Digital VoP Media DSP Table Profile

VersionTemplateNumber

Integer0-255

Offline 0 Selects the DSP load number. Each load has adifferent coder list, a different channel capacity anddifferent features supported.

Range = 0 to 255Mib name:acMediaDSPConfigVersionTemplateNumberINI Name: DSPVERSIONTEMPLATENUMBERProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.3.2 Tab: Voice Settings

Frame: Media Provisioning (TP-6310) , Tab: Voice Settings

ParameterName


DefaultValue

Description

Jitter Buffer

MinimalDelay (ms)

Integer0-150

Online 0 Defines the Dynamic Jitter Buffer MinimumDelay (in msec).

Recommended value for a regular voice call is10.Mib name: acJitterBufferMinDelayINI Name: DJBUFMINDELAYProfile name: Digital VoP Media Profile

Opt Factor Integer0-13

Online 0 Defines the Dynamic Jitter Buffer frameerror/delay optimization.Recommended value for a regular voice call is10.Mib name: acJitterBufferOptFactorINI Name: DJBUFOPTFACTORProfile name: Digital VoP Media Profile

GeneralSettings

Volume (dB) Integer-32-31

Online -32 Defines the voice output gain control.Range: -32 dB to +31 dB in 1 dB steps

-32 = muteDefault = 0 = No GainMib name: acVoiceVolumeINI Name: VOICEVOLUMEProfile name: Digital VoP Media Profile

PayloadFormat

Enum:VoicePayloadFormatRTP(0),

VoicePayloadFormatATM(1)

Online 0 Sets the voice payload format. Choose either 0= RTP or 1 = ATM (which enables working withvendors that use G.726 ATM Payload Formatover RTP. Uses the enumacTVoicePayloadFormat.0 = VoicePayloadFormatRTP1 = VoicePayloadFormatATM

2 = VoicePAyloadFormatIllegalMib name: acVoicePayloadFormatINI Name: VOICEPAYLOADFORMATProfile name: Digital VoP Media Profile

Input Gain(dB)

Integer-32-31

Online -32 Defines the PCM input gain.Range = -32 dB to +31 dB in 1 dB steps.Default = No GainMib name: acVoiceInputGainINI Name: INPUTGAINProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

EchoCanceller

Enable


Online 0 Enables or disables the Echo Canceller.

0 = Disable

1 = EnableMib name: acVoiceECEnableINI Name: ENABLEECHOCANCELLERProfile name: Digital VoP Media Profile

EchoCanceller

Hybrid Loss

Enum:ECHybridLoss6

DBM(0),ECHybridLoss9



DBM(3)

Online 0 Sets the worst case ratio between the signallevel transmitted to the hybrid and the echo levelreturning from hybrid. Set this per worst hybrid inthe system in terms of echo return loss. Refer tothe enumeration acTECHybridLoss.

0 = 6 dBm1 = 9 dBm

2 = 0 dBm3 = 3 dBmMib name: acVoiceECHybridLossINI Name: ECHYBRIDLOSSProfile name: Digital VoP Media Profile

ToneDetector


Online 0 Used to configure the Echo Canceler ToneDetector. Detects a 2100 Hz tone at the inputsignal to the TDM (received signal). ImprovesEcho Canceler operation accordingly. Detects2100, 2100 with phase reversals and 2100 withAM. Improves the operation of the EchoCanceler by slowing adaptation when the signal

is detected. This data is also used by the faxstate machine.0 = Disable1 = EnableMib name: acVoiceECToneDetectorINI Name: ECENABLETONEDETECTORProfile name: Digital VoP Media Profile

ComfortNoise

Generation


Online 0 Use this parameter to enable or enable EchoCanceler Comfort Noise Generation, whichgenerates comfort noise when the Non LinearProcessor (NLP) is active.When the NLP ascertains that the signal is echoand not doubletalk and decides to clip, instead of

transmitting silence it transmits a synthesizedsignal similar to the background noise.0 = Disable1 = EnableMib name: acVoiceECComfortNoiseGenerationINI Name:ECENABLECOMFORTNOISEGENERATIONProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

SilenceCompressio

n Mode

Enum:SILENCE-

COMPRESION

-DISABLE(0),SILENCE-

COMPRESION-ENABLE(1),

SILENCE-COMPRESION

-ENABLE-NOISE-

ADAPTATION-DISABLE(2)

Online 0 Enables or disables Silence Suppression Mode.

0 = Disable =

SILENCE_COMPRESION_DISABLE1 = Enable =SILENCE_COMPRESION_ENABLE2 = Enable without adaptation =SILENCE_COMPRESION_ENABLE_NOISE_ADAPTATION_DISABLEMib name: acVoiceSCModeINI Name: ENABLESILENCECOMPRESSIONProfile name: Digital VoP Media Profile

AutomaticGain Control

AGC Enable Enum:Disable(0),Enable(1)

Online 0 Activates the AGC (Automatic Gain Control).0 = Disable1 = EnableMib name: acVoiceAGCEnableINI Name: ENABLEAGCProfile name: Digital VoP Media Profile

Gain Slope Integer0-31

Online 0 Determines the AGC (Automatic Gain Control)convergence rate.Range = 0 to 31 (according toacTAGCGainSlope)Default = 3 (= 1 db/sec)Mib name: acVoiceAGCGainSlope

INI Name: AGCGAINSLOPEProfile name: Digital VoP Media Profile

Redirection Integer0-1

Online 0 Determines the AGC (Automatic Gain Control)direction.0 = AGC works on signals from the TDM side1 = AGC works on signals coming from theNetwork sideMib name: acVoiceAGCRedirectionINI Name: AGCREDIRECTIONProfile name: Digital VoP Media Profile

TargetEnergy

Integer0-63

Online 0 Determines the signal energy value [-dBm] thatthe AGC (Automatic Gain Control) attempts toattain.

Range = 0 to 63Mib name: acVoiceAGCTargetEnergyINI Name: AGCTARGETENERGYProfile name: Digital VoP Media Profile

MinimalGain (dB)

Integer0-31

Offline 20 Defines the minimum gain by the AGC whenactivated [- db].

Range = 0 to -31Mib name: acVoiceAGCMinGainINI Name: AGCMINGAIN

Profile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

MaximalGain (dB)

Integer0-18

Offline 15 Defines the maximum gain by the AGC whenactivated [db].

Range = 0 to 18Mib name: acVoiceAGCMaxGainINI Name: AGCMAXGAINProfile name: Digital VoP Media Profile

Disable FastAdaptation


Offline 0 Disables the AGC Fast Adaptation mode.

Enable = 1Disable = 0Mib name: acVoiceAGCDisableFastAdaptationINI Name: AGCDISABLEFASTADAPTATIONProfile name: Digital VoP Media Profile

CodersEVRC Enum:

variableRate(0), ac1kbps(1),ac4kbps(2),ac8kbps(3)

Online 1 This parameter is used to configure the EVRCcoder bit rate.0 = Variable Rate1 = 1 kbps2 = 4 kbps3 = 8 kbpsMib name: acVoiceCoderRateEVRCINI Name: EVRCRATEProfile name: Digital VoP Media Profile

QCELP8 Enum:variableRate(0)

, ac1kbps(1),ac2kbps(2),ac4kbps(3),ac8kbps(4)

Online 1 This parameter is used to configure the QCELP8coder bit rate.

0 = Variable Rate1 = 1 kbps2 = 2 kbps3 = 4 kbps4 = 8 kbpsMib name: acVoiceCoderRateQCELP8INI Name: QCELP8RATEProfile name: Digital VoP Media Profile

QCELP13 Enum:variableRate(0), ac1kbps(1),ac3kbps(2),ac7kbps(3),ac13kbps(4)

Online 1 This parameter is used to configure theQCELP13 coder bit rate.0 = Variable Rate1 = 1 kbps2 = 3 kbps3 = 7 kbps4 = 13 kbps

Mib name: acVoiceCoderRateQCELP13INI Name: QCELP13RATEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

G729 EVMax Bit

Rate

Enum:G729EV-

RATE-8-KBPS

(0), G729EV-RATE-12-KBPS (1),G729EV-RATE-14-KBPS (2),G729EV-RATE-16-KBPS (3),G729EV-RATE-18-KBPS (4),G729EV-RATE-20-KBPS (5),G729EV-RATE-22-KBPS (6),G729EV-RATE-24-KBPS (7),G729EV-RATE-26-KBPS (8),G729EV-RATE-28-KBPS (9),G729EV-RATE-30-KBPS (10),G729EV-RATE-32-KBPS (11),G729EV-RATE-

UNDEFINED(15)

Online 0 Determines the maximum generation bitrate forall participants in a session using G729EVcoder. This parameter is defined per sessionand is equal for all the parties. The initialgeneration bit rate is the minimum between theMaxBitRate and the MBS values.

Possible values are:0 = G729EV_RATE_8_KBPS1 = G729EV_RATE_12_KBPS2 = G729EV_RATE_14_KBPS3 = G729EV_RATE_16_KBPS4 = G729EV_RATE_18_KBPS5 = G729EV_RATE_20_KBPS6 = G729EV_RATE_22_KBPS7 = G729EV_RATE_24_KBPS8 = G729EV_RATE_26_KBPS9 = G729EV_RATE_28_KBPS10 = G729EV_RATE_30_KBPS11 = G729EV_RATE_32_KBPS15 = G729EV_RATE_UNDEFINEDMib name:acVoiceCoderRateG729EVMaxBitRateINI Name: G729EVMAXBITRATEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

G729 EVLocal MBS

Enum:G729EV-

RATE-8-KBPS


UNDEFINED(15)

Online 0 Determines the maximal bitrate, which may beused by the G729EV coder at a specific channel.This parameter is defined per channel and mayvary between the parties. The initial generationbit rate is the minimum between the MaxBitRateand the MBS values.

Possible values are:0 = G729EV_RATE_8_KBPS1 = G729EV_RATE_12_KBPS2 = G729EV_RATE_14_KBPS3 = G729EV_RATE_16_KBPS4 = G729EV_RATE_18_KBPS5 = G729EV_RATE_20_KBPS6 = G729EV_RATE_22_KBPS7 = G729EV_RATE_24_KBPS8 = G729EV_RATE_26_KBPS9 = G729EV_RATE_28_KBPS10 = G729EV_RATE_30_KBPS11 = G729EV_RATE_32_KBPS15 = G729EV_RATE_UNDEFINEDMib name:acVoiceCoderRateG729EVLocalMBSINI Name: G729EVLOCALMBSProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

G729 EVReceive

MBS

Enum:G729EV-

RATE-8-KBPS


UNDEFINED(15)

Online 0 Determines the value of the MBS field of theG729EV frames to be sent to the other party.This parameter reflects the maximum bit rate,which the local G729EV supports as a receiver. Possible values are:0 = G729EV_RATE_8_KBPS1 = G729EV_RATE_12_KBPS2 = G729EV_RATE_14_KBPS3 = G729EV_RATE_16_KBPS4 = G729EV_RATE_18_KBPS5 = G729EV_RATE_20_KBPS6 = G729EV_RATE_22_KBPS7 = G729EV_RATE_24_KBPS8 = G729EV_RATE_26_KBPS9 = G729EV_RATE_28_KBPS10 = G729EV_RATE_30_KBPS11 = G729EV_RATE_32_KBPS15 = G729EV_RATE_UNDEFINEDMib name:acVoiceCoderRateG729EVReceiveMBSINI Name: G729EVRECEIVEMBSProfile name: Digital VoP Media Profile

Microsoft

RTAForward

ErrorCorrection

Mode

Enum:

disable(0),enable(1)

Online 1 Determines the Microsoft RTA coder forward

error correction mode.

0 - Disable.1 - Enable.Mib name:acVoiceCoderRateMsRtaForwardErrorCorrectionEnableINI Name:MSRTAFORWARDERRORCORRECTIONENABLEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

MicrosoftRTA Bit

Rate

Integer0-29000

Online 0 Determines the Microsoft RTA coder TX bit rate. 0 - Automatic.

Any value between 8,800 - 29,000.Mib name: acVoiceCoderRateMsRtaTxBitRateINI Name: MSRTATXBITRATEProfile name: Digital VoP Media Profile

VBR CoderDTX Min

Integer0-20000

Online 0 Defines the minimum number of frames gapbetween two SID frames, when using the EVRCvoice activity detector.

Mib name: acVoiceSCVBRCoderDTXMinINI Name: EVRCDTXMINProfile name: Digital VoP Media Profile

VBR CoderDTX Max Integer0-20000 Online 0 Defines the maximum number of frames gapbetween two SID frames, when using the EVRCvoice activity detector.Mib name: acVoiceSCVBRCoderDTXMaxINI Name: EVRCDTXMAXProfile name: Digital VoP Media Profile

VBR CoderHangover

Integer0-255

Online 0 For indicating the desired number of silenceframes at the beginning of each silence period,when using the VBR CODER silencesuppression.

Mib name: acVoiceSCVBRCoderHangoverINI Name: VBRCODERHANGOVER


2.3.3 Tab: Caller ID Settings

Frame: Media Provis ioning (TP-6310), Tab: Caller ID Settings

ParameterName


DefaultValue

Description

Caller IdTypes

Enum:Bellcore (0), ETSI(1), NTT (2), BT

(4), DTMF-Based-ETSI (16),

Denmark (17),Indian (18),

Brazilian (19)

Online 0 Defines the supported Caller ID standard.0 = Bellcore1 = ETSI2 = NTT4 = British16 = ETSI_ETS17 = Denmark18 = Indian19 = BrazilianMib name: acCallerIDTypesINI Name: CALLERIDTYPEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

TransportType

Enum:CallerID-

DISABLE(0),

CallerID-RELAY(1),

CallerID-MUTE(3)

Online 0 Defines the CallerID Transport type.

0 = Disable

1 = Relay3 = MuteMib name: acCallerIDTransportTypeINI Name: CALLERIDTRANSPORTTYPEProfile name: Digital VoP Media Profile

DTMF BasedMax Digits

Integer0-26

Online 0 Determines the maximum number of DTMFdigits in a DTMF-based Caller ID string.

Range = 0 to 26Mib name:acCallerIDDTMFBasedMaxDigitsINI Name:

MAXDTMFDIGITSINCIDSTRINGProfile name: Digital VoP Media Profile

DTMF BasedMin Digits

Integer0-26

Online 0 Determines the mimumum number ofDTMF digits in a DTMF-based Caller IDstring.

Range = 0 to 26Mib name: acCallerIDDTMFBasedMinDigitsINI Name: MINDTMFDIGITSINCIDSTRINGProfile name: Digital VoP Media Profile

2.3.4 Tab: Bypass Settings

Frame: Media Provisioning (TP-6310), Tab: Bypass Settings

ParameterName


DefaultValue

Description

Coder Type Enum:G711Alaw

-64(0),G711Mula

w(1)

Online 0 Users can use this parameter to set thefax/modem bypass coder (according toacTCoders).

0 = G.711 A-Law

1 = G.711 Mu-LawMib name: acFMBypassCoderTypeINI Name: FAXMODEMBYPASSCODERTYPEProfile name: Digital VoP Media Profile

PacketizationPeriod

Integer1-12

Online 1 Defines the number of basic frames to generateone RTP fax/modem bypass packet.Mib name: acFMBypassPacketizationPeriodINI Name: FAXMODEMBYPASSMProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Basic PacketInterval

Enum:PACKET-INTERVA

L-DEFAULT

(0),PACKET-INTERVA

L-5-MSEC(1),PACKET-INTERVA

L-10-MSEC(2),PACKET-INTERVA

L-20-MSEC(3)

Online 0 Sets the basic Fax / Modem Bypass RTP packetrate.0 = Default (set internally)

(PACKET_INTERVAL_DEFAULT)1 = 5 msec (PACKET_INTERVAL_5_MSEC)2 = 10 msec (PACKET_INTERVAL_10_MSEC)3 = 20 msec (PACKET_INTERVAL_20_MSEC)Mib name: acFMBypassBasicPacketIntervalINI Name:FAXMODEMBYPASSBASICRTPPACKETINTERVALProfile name: Digital VoP Media Profile

Dynamic JitterBuffer

Minimal Delay(ms)

Integer0-150

Online 0 Determines the Jitter Buffer constant delay (inmilliseconds) during a Fax And Modem Bypasssession. (The minimum Jitter Buffer Size).

Range = 0 to 150Mib name: acFMBypassDJBufMinDelayINI Name:FAXMODEMBYPASDJBUFMINDELAYProfile name: Digital VoP Media Profile

NSE PayloadType Integer96-127 Online 96 Users can use this parameter to modify the NSEpacket's payload type.

Range = 96 to 127Mib name: acFMNSEPayloadTypeINI Name: NSEPAYLOADTYPEProfile name: Digital VoP Media Profile

NSE Mode Enum:Disable(0),Enable(1)

Online 0 Enables or disables Cisco's NSE fax / modemautomatic pass-through mode.

0 = Disable1 = EnableMib name: acFMNSEMode

INI Name: NSEMODEProfile name: Digital VoP Media Profile

EnableInband

NetworkDetection


Online 0 Enables or disables inband network detectionrelated to fax/modem.

0 = Disable1 = EnableMib name:acFMCommonEnableInbandNetworkDetectionINI Name:ENABLEFAXMODEMINBANDNETWORKDETECTION


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Fax BypassPayload Type

Integer0-127

Online 0 Users can use this parameter to modify the FaxBypass Mode RTP packet's payload type.In the case of congestion (if the selected

payload type is already used for othercoders/modes), then aTP_SETUP_PARAMETER_INVALID_ERROR isissued and the payload type is set to the defaultvalue (102).It is the user's responsibility to avoid congestionwith other payload types.

Range = 0 to 127Mib name: acFaxBypassPayloadTypeINI Name: FAXBYPASSPAYLOADTYPEProfile name: Digital VoP Media Profile

ModemBypass

Payload Type

Integer0-127

Online 0 Users can use this parameter to modify theModem Bypass Mode RTP packet's payloadtype.In the case of congestion (if the selectedpayload type is already used for othercoders/modes), then aTP_SETUP_PARAMETER_INVALID_ERROR isissued and the payload type is set to the defaultvalue (103).It is the user's responsibility to avoid congestionwith other payload types.

Range = 0 to 127

Mib name: acModemBypassPayloadTypeINI Name: MODEMBYPASSPAYLOADTYPEProfile name: Digital VoP Media Profile

Fax BypassOutput Gain

Integer-31-31

Online -31 Defines the fax bypass output gain control.Range: -31 dB to +31 dB in 1 dB stepsDefault = 0 = No Gain.Mib name: acFMBypassFaxBypassOutputGainINI Name: FAXBYPASSOUTPUTGAINProfile name: Digital VoP Media Profile

ModemBypass

Output Gain

Integer-31-31

Online -31 Defines the modem bypass output gain control.Range: -31 dB to +31 dB in 1 dB stepsDefault = 0 = No Gain

Mib name:acFMBypassModemBypassOutputGainINI Name: MODEMBYPASSOUTPUTGAINProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




2.3.5 Tab: FAX Settings

Frame: Media Provisioning (TP-6310) , Tab: FAX Settings

ParameterName


DefaultValue

Description

TransportMode

Enum:Disable(0),

RelayEnable(1),ByPassEnable(2),

EventsOnly(3)

Online 0 Sets the Fax over IP transport method.

0 = Transparent1 = Relay2 = Bypass3 = Transparent with EventsMib name: acFaxTransportModeINI Name: FAXTRANSPORTMODEProfile name: Digital VoP Media Profile

Relay ECMEnable


Online 0 Enables or disables the using of ECM modeduring Fax Relay.

0 = Disable1 = EnableMib name: acFaxRelayECMEnableINI Name: FAXRELAYECMENABLEProfile name: Digital VoP Media Profile

Relay MaxRate

Enum:acRate2400bps(0

),acRate4800bps(1

),acRate7200bps(2),

acRate9600bps(3),

acRate12000bps(4),

acRate14400bps(5),

acRate16800bps(6),

acRate19200b(7),acRate21600bps(

8),acRate24000bps(

9),acRate26400bps(

10),acRate28800bps(

11),acRate31200bps(

12),acRate33600bps(

13)

Online 0 Limits the maximum rate at which faxmessages are transmitted.

0 = 2400 bps

1 = 4800 bps2 = 7200 bps3 = 9600 bps4 = 12000 bps5 = 14400 bps6 = 16800 bps7 = 19200 bps8 = 21600 bps9 = 24000 bps10 = 26400 bps11 = 28800 bps12 = 31200 bps13 = 33600bps

Mib name: acFaxRelayMaxRateINI Name: FAXRELAYMAXRATEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

RelayRedundancy

Depth

Integer0-2

Online 0 Determines the depth of redundancy for faxpackets. This parameter is applicable onlyto non-V.21 packets.

0 = No redundancy1 = 1 packet redundancy2 = 2 packet redundancyMib name: acFaxRelayRedundancyDepthINI Name:FAXRELAYREDUNDANCYDEPTHProfile name: Digital VoP Media Profile

EnhancedRelay

RedundancyDepth

Integer0-4

Online 0 Determines the number of repetitions to beapplied to control packets when using theT.38 standard.

0 = No redundancy1 = 1 packet redundancy2 = 2 packet redundancy3 = 3 packet redundancy4 = Maximum redundancyMib name:acFaxEnhancedRelayRedundancyDepthINI Name:FAXRELAYENHANCEDREDUNDANCYDEPTHProfile name: Digital VoP Media Profile

CNG

DetectorMode

Enum:

CNG-DETECTOR-MODE-

DISABLE(0),CNG-

DETECTOR-MODE-

RELAY(1), CNG-DETECTOR-

MODE-EVENT-ONLY(2)

Online 0 Determines the CNG Detector mode.

0 = Disable1 = Relay2 = Event OnlyMib name: acFaxCNGDetectorModeINI Name: CNGDETECTORMODEProfile name: Digital VoP Media Profile

RelayVolume

(dBm)

Integer-18--3

Online -18 Determines the fax gain control.

The range -18 to -3 relates to -18.5 dBm to-3.5 dBm in steps of 1 dBm.Mib name: acFMCommonRelayVolumeINI Name: FAXMODEMRELAYVOLUMEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

V34TransportMethod

Enum:Disable(0),

RelayEnable(1),

ByPassEnable(2),EventsOnly(3)

Online 0 Determines the V.34 fax transport method. One of the following values:

0 = Transparent1 = Relay2 = Bypass3 = Transparent with EventsMib name: acFaxV34TransportMethodINI Name: V34FAXTRANSPORTTYPEProfile name: Digital VoP Media Profile

T38 Version Enum:T38Version0(0),T38Version3(3)

Online 3 T38 fax relay version.

0 = T.38 version 0 (from 06/1998)3 = T.38 version 3 (V.34 over T.38 support)

Default = 3Mib name: acFaxT38VersionINI Name: T38VERSIONProfile name: Digital VoP Media Profile

2.3.6 Tab: Modem Settings

Frame: Media Provisioning (TP-6310), Tab: Modem Settings

Parameter

Name

Type Provisioning

Type

Default

Value

Description

V21Transport

Enum:Disable(0),


EventsOnly(3)

Online 0 Sets the V.21 modem transport method(must be set to 0 = Disable).

0 = Transparent2 = Bypass3 = Transparent with EventsMib name: acModemV21TransportINI Name: V21MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile

V22

Transport

Enum:

Disable(0),RelayEnable(1),ByPassEnable(2),

EventsOnly(3)

Online 0 Sets the V.22 modem transport method.


V23Transport

Enum:Disable(0),


EventsOnly(3)

Online 0 Sets the V.23 modem transport method.0 = Transparent2 = Bypass3 = Transparent with EventsMib name: acModemV23TransportINI Name: V23MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

V32Transport

Enum:Disable(0),

RelayEnable(1),

ByPassEnable(2),EventsOnly(3),

AnsMute(4)


0 = Transparent

2 = Bypass3 = Transparent with Events4 = AnsMuteMib name: acModemV32TransportINI Name: V32MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile

BellTransport

Type

Enum:Disable(0),

ByPassEnable(2),EventsOnly(3)

Online 0 Use this parameter to set the Bell modemtransport method.0 = Transparent2 = Bypass (enum ByPassEnable)3 = Transparent with Events (enumEventsOnly)

Mib name: acModemBellTransportTypeINI Name:BELLMODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile

V34Transport

Enum:Disable(0),


EventsOnly(3),AnsMute(4)


0 = Transparent2 = Bypass3 = Transparent with Events4 = AnsMuteMib name: acFMCommonV34TransportINI Name: V34MODEMTRANSPORTTYPE

Profile name: Digital VoP Media ProfileV150.1

AllocationProfile

Integer0-21

Offline 0 Selects the V.150.1 profile, determininghow many DSP channels have V.150.1support.

Range = 0 to 3Mib name: acV150dot1AllocationProfileINI Name: V1501ALLOCATIONPROFILEProfile name: Digital VoP Media Profile

SSE PayloadType Rx

Integer96-127

Online 105 SSE payload type RXMib name: acV150dot1SSEPayloadTypeRxINI Name: V1501SSEPAYLOADTYPERXProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

SSERedundancy

Depth

Integer1-6

Online 3 SSE is a part of V150.1 modem relayprotocol and SSE messages are sent overRTP.

SSE redundancy refers to the sending ofSSE messages several times to increasereliability. This parameter determines thenumber of times each SSE message is tobe resent.Mib name:acV150dot1SSERedundancyDepthINI Name:V1501SSEREDUNDANCYDEPTHProfile name: Digital VoP Media Profile

2.3.7 Tab: In-Band-Signaling

Frame: Media Prov isioning (TP-6310), Tab: In-Band-Signaling

ParameterName


DefaultValue

Description

DTMFVolume(dBm)

Integer-31-0

Online -31 Defines and controls the DTMFgeneration volume [-dBm].

Range = -31 to 0Mib name: acIBSDTMFVolume

INI Name: DTMFVOLUMEProfile name: Digital VoP Media Profile

DTMFTransport

Type

Enum:acMuteDTMF(0),

acTransparentDTMF(2),

acRFC2833RelayDTMF(3),

acRFC2833RelayDecoderMute(7)

Online 0 Defines the type of DTMF transport.

0 = Erase DTMFs from voice transportnot relayed to remote2 = DTMFs not erased are not relayed toremote3 = DTMFs are muted from the voicestream and relayed according to RFC28337 = DTMFs are sent according to RFC2833 and muted when received

Mib name: acIBSDTMFTransportTypeINI Name: DTMFTRANSPORTTYPEProfile name: Digital VoP Media Profile

CAS RelayTransport

Mode

Enum:CASEventsOnly(0),

CASRFC2833Relay(1)

Online 0 Controls the ABCD signaling transporttype over IP.

0 = No Relay over the network1 = Enable CAS relay according to RFC2833Mib name:acIBSCASRelayTransportModeINI Name: CASTRANSPORTTYPE


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Rx DTMFRelay HangOver Time

(msec)

Integer0-2000

Online 0 Used to configure the Voice Silence time(in ms units) after playing DTMF or MFdigits to the TDM side that arrived as

Relay from the Network side.

Range from 0 to 2000, Default 1000.Mib name: acIBSRxDtmfHangOverTimeINI Name: RXDTMFHANGOVERTIMEProfile name: Digital VoP Media Profile

Tx DTMFRelay HangOver Time

(msec)

Integer0-2000

Online 0 Voice Silence time (in ms units) afterdetecting the end of DTMF or MF digitsat the TDM side when the DTMFTransport Type is either Relay orMute.This feature allows the user toconfigure the silence time.

Mib name: acIBSTxDtmfHangOverTimeINI Name: TXDTMFHANGOVERTIMEProfile name: Digital VoP Media Profile

DTMF TwistControl

Integer-10-10

Offline 0 Defines a delta (in dB) between the highand low frequency component in theDTMF signal. dB Positive values causethe higher frequency component to bestronger than the lower one. Negativevalues cause the opposite effect. Forany parameter value, both componentschange so that their average is constant.

Range = -10 to 10Mib name: acIBSDTMFTwistControlINI Name: DTMFGENERATIONTWISTProfile name: Digital VoP Media Profile

Detector

TrunkTestingTones

Detector

Enum:Disables (0), Enables

(1)

Offline 0 Enables or disables trunk testing tones.0 = Disables trunk testing tones1 = Enables trunk testing tonesMib name:acIBSTrunkTestingTonesEnableINI Name:

ENABLETRUNKTESTINGTONESProfile name: Digital VoP Media Profile

MF R1Enable

Enum:Disable(0), Enable(1)

Online 0 Enables or disables detection of MFR1signaling.0 = Disable1 = EnableMib name: acIBSDetectorsMFR1EnableINI Name: MFR1DETECTORENABLEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

MF R2ForwardEnable


Online 0 Enables or disables detection of MFR2forward signaling.0 = Disable

1 = EnableMib name:acIBSDetectorsMFR2ForwardEnableINI Name:MFR2FORWARDDETECTORENABLEProfile name: Digital VoP Media Profile

MF R2Backward

Enable


Online 0 Enables or disables detection of MFR2backward signalingMib name:acIBSDetectorsMFR2BackwardEnableINI Name:MFR2BACKWARDDETECTORENABLE

Profile name: Digital VoP Media ProfileR1 LineEnable


Online 0 Enables or disables detection of Linesignaling.0 = Disable1 = EnableMib name:acIBSDetectorsR1LineEnableINI Name: R1LINEDETECTORENABLEProfile name: Digital VoP Media Profile

DTMFEnable


Online 0 Enables or disables detection of DTMFsignaling.

0 = Disable1 = EnableMib name: acIBSDetectorsDTMFEnableINI Name: DTMFDETECTORENABLEProfile name: Digital VoP Media Profile

CallProgressEnable


Online 0 Enables or disables detection of CallProgress Tones.

0 = Disable1 = EnableMib name:acIBSDetectorsCallProgressEnable

INI Name:CALLPROGRESSDETECTORENABLEProfile name: Digital VoP Media Profile

UserDefined

ToneEnable


Online 0 Enables or disables detection of UserDefined Tones signaling.

0 = Disable1 = EnableMib name:acIBSDetectorsUserDefinedToneEnableINI Name:USERDEFINEDTONEDETECTORENA

BLEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

DetectionRedirection

Enum:pcm(0), network(1)

Online 0 Determines the IBS (In-Band Signaling)Detection Direction.

0 = PCM1 = NetworkMib name:acIBSDetectorsDetectionRedirectionINI Name:IBSDETECTIONREDIRECTIONProfile name: Digital VoP Media Profile

SIT Enable Enum:Disable(0), Enable(1)

Offline 0 Enables or disables SIT (SpecialInformation Tone) detection according tothe ITU-T recommendation E.180/Q.35. 0 = Disable

1 = EnableMib name: acIBSDetectorsSITEnableINI Name: SITDETECTORENABLEProfile name: Digital VoP Media Profile

COT Enable Enum:Disable(0), Enable(1)

Offline 0 Enables or disables Continuity Test tonedetection and generation according tothe ITU-T Q.724 recommendation.

0 = Disable1 = EnableMib name: acIBSDetectorsCOTEnableINI Name:

ENABLECONTINUITYTONESProfile name: Digital VoP Media Profile

R1.5DetectionStandard

Enum:MfR1DetectionStandar

dItu (0),MfR1DetectionStandar

dR15 (1)

Offline 0 This parameter determines which one ofthe R1 MF protocol flavors will be usedfor detection.

0 = ITU1 = R1.5Mib name:acIBSDetectorsR1DetectionStandardINI Name: R1DETECTIONSTANDARDProfile name: Digital VoP Media Profile

UDTDetector

FrequencyDeviation

Integer1-50

Offline 50 Defines the deviation allowed for thedetection of each signal frequency. Unitsare in Hertz.Valid values range 1-50.Default value 50 Hz.

Mib name:acIBSDetectorsUDTDetectorFrequencyDeviationINI Name:UDTDETECTORFREQUENCYDEVIATIONProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

CPTDetector

Frequency

Deviation

Integer1-30

Offline 10 Defines the deviation allowed for thedetection of each CPT signal frequency.Units are in Hertz.

Valid values range 1-30.Default value 10 Hz.

Mib name:acIBSDetectorsCPTDetectorFrequencyDeviationINI Name:CPTDETECTORFREQUENCYDEVIATIONProfile name: Digital VoP Media Profile

2.3.8 Tab: RTP Settings

Frame: Media Provis ioning (TP-6310), Tab: RTP Settings

ParameterName


DefaultValue

Description

Base UDPPort

Integer1024-65535

Offline 4000 Defines the lower boundary of UDP ports tobe used by the board. The upper boundaryis calculated on the basis ofBoardBaseUDPPort + 10 * (Number ofChannels). This parameter value must be a

multiple of 10.

Mib name: acRtpBaseUDPPortINI Name: BASEUDPPORTProfile name: Digital VoP Media Profile

Disable NAT Enum:No(0), Yes(1)

Online 0 Enables or disables the NAT feature.0 = Do not disable NAT1 = Disable NATMib name: acMediaNetworkDisableNATINI Name: DISABLENATProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

ComfortNoise Enable


Online 0 When set to 1 (Enable), SID packets aresent with the RTP SID type (RFC 3389).0 = Disable

1 = EnableDetermines whether Silence Indicator (SID)packets that are sent and received areaccording to RFC 3389.0 = Disabled (default).1 = Enabled.Note: Applicable only to MP-11x andMediant 1000.

Mib name: acRtpComfortNoiseEnableINI Name:ENABLESTANDARDSIDPAYLOADTYPEProfile name: Digital VoP Media Profile

RFC2833 TxPayload Type

Integer96-127

Online 96 Controls the RFC 2833 Tx Relay RTPPayload type.

Range = 96 to 127Mib name: acRtpRFC2833TxPayloadTypeINI Name: RFC2833TXPAYLOADTYPEProfile name: Digital VoP Media Profile

RFC2833 RxPayload Type

Integer96-127

Online 96 Controls the RFC 2833 Rx Relay RTPPayload type.

Range = 96 to 127

Mib name: acRtpRFC2833RxPayloadTypeINI Name: RFC2833RXPAYLOADTYPEProfile name: Digital VoP Media Profile

NTE MaxDuration

Integer-1-200000000

Online -1 Maximal time for sending NTEs (NamedTelephony Events) to the network,regardless of the time range when the TDMsignal is detected.

-1= NTE will stop only upon detection ofEnd event (default).Mib name: acIBSNTEMaxDurationINI Name: NTEMAXDURATIONProfile name: Digital VoP Media Profile

RedundancyPayload Type

Integer96-127

Online 96 This parameter sets the RFC 2198 (RTPRedundancy) packet's parameter 'RTPPayload Type'.

Range: 96 to 127Mib name: acRtpRedundancyPayloadTypeINI Name: RFC2198PAYLOADTYPEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

RedundancyDepth

Enum:NoRedundancy(0),RedundacnyDepth

(1)

Online 0 Redundancy depth of RFC 2198redundancy packets.

0 = No redundancy1 = Redundacny depthMib name: acRtpRedundancyDepthINI Name: RTPREDUNDANCYDEPTHProfile name: Digital VoP Media Profile

PacketizationFactor

Integer1-12

Online 1 Defines the number of DSP payloads forgenerating one RTP packet.Range = Hardware dependentMib name: acRtpPacketizationFactorINI Name: RTPPACKINGFACTORProfile name: Digital VoP Media Profile

No Op Enable Enum:Disable(0),Enable(1)

Online 0 Enables / disable Noop packets sendingmode.

0 = Disable1 = EnableMib name: acRtpNoOpEnableINI Name: NOOPENABLEProfile name: Digital VoP Media Profile

No OpPayload Type

Integer96-127

Online 96 User can modify the Noop packets RTPPayload type by setting this parameter.

Range = 96 to 127Mib name: acRtpNoOpPayloadType

INI Name: RTPNOOPPAYLOADTYPEProfile name: Digital VoP Media Profile

No OpInterval

Integer20-600000

Online 20 Used to modify the Noop packets sendinginterval

Parameter value is in millisecondsDefault value = 10 sec (10000 msec)

Range = 20 to 600000(20 msec to 10 min - 10 min = 600000)Mib name: acRtpNoOpIntervalINI Name: NOOPINTERVAL


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

VBR CoderHeaderFormat

Enum:WithOut-

RFC2658Interleavi

ng-And-TOC(0),Including-

RFC2658Interleaving-And-TOC(1),Including-TOC-

Only(2),Interleave-Bundling(3)

Online 0 0 - payload only (no header, no toc, no m-factor)

1- support RFC 2658 format, 1 byte forinterleaving header (always 0) and toc, nom-factor

2 ? payload including toc only, allow m-factor

3- RFC 3358 format

Mib name: acRtpVBRCoderHeaderFormatINI Name: VBRCODERHEADERFORMATProfile name: Digital VoP Media Profile

AMR CoderHeaderFormat

Enum:CE-AMR-

DEFAULT-FORMAT(0), CE-AMR-RFC-3267-BUNDLING(1),CE-AMR-RFC-

3267-INTERLEAVING(2), CE-AMR-IF2(3)

Online 0 AMR_CODER_HEADER_DEFAULT_FORMAT=0 - old m factor, each frame containsCRM byte and tocRFC_3267_BUNDLING=1 - single CRMbyte followed by toc tablesRFC_3267_INTERLEAVING=2 - supportedas receivers onlyMib name: acRtpAMRCoderHeaderFormatINI Name: AMRCODERHEADERFORMATProfile name: Digital VoP Media Profile

BrokenConnection

EventTimeout

Integer3-2684354

Online 3 Determines for how long the RTPconnection should be broken before the

Broken Connection event is issued. In unitsof 100 msec.

Mib name:acRtpRtcpBrokenConnectionEventTimeoutINI Name:BROKENCONNECTIONEVENTTIMEOUTProfile name: Digital VoP Media Profile

BrokenConnection

EventActivation

Mode

Enum:AfterFirstIncoming

RTPPacket(0),OnRTPStreamActi

vation(1)

Online 0 Determines if the broken connectionmechanism is activated when the RTPstream is activated or when the first RTPpacket is received.0 = After First incoming packet (default)

1 = Upon channel?s RTP activation.

Mib name:acRtpRtcpBrokenConnectionEventActivationModeINI Name:BROKENCONNECTIONEVENTACTIVATIONMODEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Basic RTPPacketInterval

Enum:PACKET-

INTERVAL-

DEFAULT(0),PACKET-

INTERVAL-5-MSEC(1),PACKET-

INTERVAL-10-MSEC(2),PACKET-

INTERVAL-20-MSEC(3)

Online 0 Selects the RTP packet rate for samplebased coders (such as G.711, G.726,G.727). Also applicable for G.729, G.729E

And G.728.0 = Default (set internally)1 = 5 msec2 = 10 msec3 = 20 msecMib name:acRtpRtcpBasicRTPPacketIntervalINI Name: BASICRTPPACKETINTERVALProfile name: Digital VoP Media Profile

ConnectionEstablish

NotificationMode

Enum:AfterBrokenConne

ction(0),UponFirstRTPFrameDetection(1)

Online 0 Determines the notification mode for theRTP connection establishment event

acEV_CONNECTION_ESTABLISHED.0 = Notify only after a broken connectionevent1 = Also notify when the first RTP packet isreceivedMib name:acRtpRtcpConnectionEstablishNotificationModeINI Name:CONNECTIONESTABLISHEMENTNOTIFICATIONMODEProfile name: Digital VoP Media Profile

AMR FECRedundancyDepth

Enum:CE-AMR-FEC-REDUNDANCY-LEVEL-NONE(0),

CE-AMR-FEC-REDUNDANCY-LEVEL-1(1), CE-

AMR-FEC-REDUNDANCY-LEVEL-2(2), CE-

AMR-FEC-REDUNDANCY-

LEVEL-3(3)

Online 0 Sets the AMR / WB-AMR Redundancydepth according to RFC 3267.

0 = No Redundancy1 = Redundancy depth of a single packet2 = Redundancy depth of 2 packets3 = Redundancy depth of 3 packets

Mib name:acRtpAMRFECRedundancyDepthINI Name: AMRFECREDUNDANCYDEPTHProfile name: Digital VoP Media Profile

AMR FECNum Of MngtPolicy Entries

Integer0-9

Online 0 Sets the number of entries to be defined atthe AMR management policy table. Eachentry defines the policy of a different rate.Mib name:acRtpAMRFECNumOfMngtPolicyEntriesINI Name:AMRFECNUMBEROFCODECMODESProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

AMR FECDelay

Hysteresis

Integer0-255

Online 0 Defines the hysteresis of the DelayThreshold for AMR Hand-out events (inmsec).

Mib name: acRtpAMRFECDelayHysteresisINI Name: AMRFECDELAYHYSTERESISProfile name: Digital VoP Media Profile

AMR FECDelay

Threshold

Integer0-255

Online 0 Defines the one-way delay value (in msec)that may cause the AMR Hand Out report. 0 = 'Hand Out' report is disabled (default).Mib name: acRtpAMRFECDelayThresholdINI Name: AMRFECDELAYTHRESHHOLDProfile name: Digital VoP Media Profile

2.3.9 Tab: SRTP Settings

Frame: Media Provisioning (TP-6310), Tab: SRTP Settings

ParameterName


DefaultValue

Description

Enable MediaSecurity


Offline 0 Enables or disables Media Security protocol(SRTP) . Enabling this parameter might reduce theboard channel capacity.

0 = Disable

1 = EnableMib name: acVoiceEnableMediaSecurityINI Name: ENABLEMEDIASECURITYProfile name: Digital VoP Media Profile

Aria ProtocolSupport


Offline 0 Enables or disables Aria encryption protocol.Enabling this parameter might reduce the boardchannel capacity.

0 = Disable1 = EnableSupported on TP6310 and TP8410Mib name: acVoiceAriaProtocolSupport

INI Name: ARIAPROTOCOLSUPPORTProfile name: Digital VoP Media Profile

RTPAuthentication

Disable Tx

Enum:inactive(0),active(1)

Online 0 On a secured RTP session, determines whether toenable Authentication on transmitted RTP packets.

One of the following values:

0 = Enable1 = DisableMib name:acSysMediaEncriptionRTPAuthenticationDisableTxINI Name: RTPAUTHENTICATIONDISABLETXProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

RTPEncryptionDisable Tx


Online 0 On a secured RTP session, determines whether toenable Encryption on transmitted RTP packets.One of the following values:

0 = Enable1 = DisableMib name:acSysMediaEncriptionRTPEncryptionDisableTxINI Name: RTPENCRYPTIONDISABLETXProfile name: Digital VoP Media Profile

RTCPEncryptionDisable Tx


Online 0 On a secured RTP session, determines whether toenable Encryption on transmitted RTCP packets.One of the following values:

0 = Enable

1 = DisableMib name:acSysMediaEncriptionRTCPEncryptionDisableTxINI Name: RTCPENCRYPTIONDISABLETXProfile name: Digital VoP Media Profile

Packet MKISize

Integer0-4

Online 0 Determines the size of the parameter Master KeyIdentifier (MKI) in SRTP Tx packets.


0 = MKI Disabled1 - 4 = size (bytes of MKI)

Mib name: acSysSRTPPacketMKISizeINI Name: SRTPTXPACKETMKISIZEProfile name: Digital VoP Media Profile

2.3.10 Tab: Misc. Settings

Frame: Media Provisioning (TP-6310), Tab: Misc. Settings

ParameterName


DefaultValue

Description

TTYTransportType

Enum:Disable(0),Inband-Relay(2),

Bypass (1)

Online 0 Defines the transferring method of TTYsignals during a call

0 = Disable1= Bypass2 = Relay

Mib name: acVoiceTTYTransportTypeINI Name: TTYTRANSPORTTYPEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Enable MediaUDP

Checksum


Offline 0 Determines whether to enable the UDPchecksum calculation for RTP media TXover IPv4. One of the following possible

values:

0 = Disable (No checksum: UDP checksumfor IPv4 TX = 0)1 = Enable (UDP checksum will be in theUDP header upon IPv4 TX)

Mib name:acRtpRtcpEnableMediaUDPChecksumINI Name:ENABLEMEDIAUDPCHECKSUMProfile name: Digital VoP Media Profile

2.3.11 Tab: Media Realm

Frame: Media Provisioning (TP-6310), Tab: Media Realm

ParameterName


DefaultValue

Description

Index Integer0-15

NA 0 Index Field for line. Internal parameter.Mib name: acCPMediaRealmIndexINI Name: CPMEDIAREALM_INDEX

Profile name: Not ProfiledDefault

Realm NameString

Up to 39 chars.Offline By default, the default CP media realm is

the first realm appearing in the CP mediarealm table.The parameter enables the user to set anyof the realms appearing in the table as thedefault realm.Mib name: acCPMediaDefaultRealmNameINI Name:CPDEFAULTMEDIAREALMNAMEProfile name: Not Profiled

Row Status Enum: NA 0 ROWSTATUS field for line. Internal

parameter.Mib name: acCPMediaRealmRowStatusProfile name: Not Profiled

Name StringUp to 38 chars.

Offline A string representing the name of the mediarealm.Mib name: acCPMediaRealmNameINI Name:CPMEDIAREALM_MEDIAREALMNAMEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

IPv4 Interface StringUp to 15 chars.

Offline The IPv4 interface name corresponding tothe one appearing in the interface table.None is the default value when no interface

is configured. The name is key sensitive.Mib name: acCPMediaRealmIPv4IfINI Name: CPMEDIAREALM_IPV4IFProfile name: Not Profiled


Offline The IPv6 interface name corresponding tothe one appearing in the interfacetable.None is the default value when nointerface is configured. The name is keysensitive.Mib name: acCPMediaRealmIPv6IfINI Name: CPMEDIAREALM_IPV6IFProfile name: Not Profiled

Port RangeStart

Integer-1-60000

Offline -1 The starting port for the range of mediaports.Mib name:acCPMediaRealmPortRangeStartINI Name:CPMEDIAREALM_PORTRANGESTARTProfile name: Not Profiled

MediaSession Leg

Integer-1-6000

Offline -1 The number of media sessions associatedwith the range of ports.Mib name:acCPMediaRealmMediaSessionLegINI Name:

CPMEDIAREALM_MEDIASESSIONLEGProfile name: Not Profiled

Port RangeEnd

Integer-1-60000

Read-Only -1 The ending port for the range of mediaports.Mib name:acCPMediaRealmPortRangeEndINI Name:CPMEDIAREALM_PORTRANGEENDProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.4 Frame: Media Provisioning (TP-8410)


Frame: Media Provis ioning (TP-8410), Tab: General Settings

ParameterName


DefaultValue

Descript ion

Index Integer0-1

NA 0 Entry number in the table.Mib name: acMediaDspIndexINI Name: DSPTEMPLATES_INDEXProfile name: Not Profiled

Media

AggregationRow Status Enum: NA 0 ROWSTATUS field for line. Internal parameter.

Mib name: acMediaDspRowStatusProfile name: Digital VoP Media DSP Table Profile

RemoteBase UDP

Port

Integer0-65535

Offline 0 Remote Base UDP Port For AggrigationMib name:acMediaAggregationRemoteBaseUDPPortINI Name: REMOTEBASEUDPPORTProfile name: Digital VoP Media Profile

TemplateNumber

Integer0-8

Offline 0 DSP template number.Mib name: acMediaDspTemplateNumber

INI Name:DSPTEMPLATES_DSPTEMPLATENUMBERProfile name: Digital VoP Media DSP Table Profile

DSP

ResourcesPercentage

Integer0-100

Offline 0 Percentage use for the specified template.Mib name: acMediaDspResourcesPercentageINI Name:DSPTEMPLATES_DSPRESOURCESPERCENTAGEProfile name: Digital VoP Media DSP Table Profile

VersionTemplateNumber

Integer0-255

Offline 0 Selects the DSP load number. Each load has adifferent coder list, a different channel capacity anddifferent features supported.

Range = 0 to 255Mib name:acMediaDSPConfigVersionTemplateNumberINI Name: DSPVERSIONTEMPLATENUMBERProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




2.4.2 Tab: Voice Settings

Frame: Media Provisioning (TP-8410), Tab: Voice Settings

ParameterName


DefaultValue

Description

Jitter Buffer

MinimalDelay (ms)

Integer0-150

Online 0 Defines the Dynamic Jitter Buffer MinimumDelay (in msec).

Recommended value for a regular voice call is10.Mib name: acJitterBufferMinDelayINI Name: DJBUFMINDELAYProfile name: Digital VoP Media Profile

Opt Factor Integer0-13

Online 0 Defines the Dynamic Jitter Buffer frameerror/delay optimization.Recommended value for a regular voice call is10.Mib name: acJitterBufferOptFactorINI Name: DJBUFOPTFACTORProfile name: Digital VoP Media Profile

GeneralSettings

Volume (dB) Integer-32-31

Online -32 Defines the voice output gain control.Range: -32 dB to +31 dB in 1 dB steps-32 = mute

Default = 0 = No GainMib name: acVoiceVolumeINI Name: VOICEVOLUMEProfile name: Digital VoP Media Profile

PayloadFormat

Enum:VoicePayloadFormatRTP(0

),VoicePayloadFormatATM(1

)

Online 0 Sets the voice payload format. Choose either 0= RTP or 1 = ATM (which enables working withvendors that use G.726 ATM Payload Formatover RTP. Uses the enumacTVoicePayloadFormat.0 = VoicePayloadFormatRTP1 = VoicePayloadFormatATM2 = VoicePAyloadFormatIllegalMib name: acVoicePayloadFormatINI Name: VOICEPAYLOADFORMATProfile name: Digital VoP Media Profile

Input Gain(dB)

Integer-32-31

Online -32 Defines the PCM input gain.Range = -32 dB to +31 dB in 1 dB steps.Default = No GainMib name: acVoiceInputGainINI Name: INPUTGAINProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

EchoCanceller

Enable


Online 0 Enables or disables the Echo Canceller.

0 = Disable

1 = EnableMib name: acVoiceECEnableINI Name: ENABLEECHOCANCELLERProfile name: Digital VoP Media Profile

EchoCanceller

Hybrid Loss

Enum:ECHybridLoss6DBM(0),

ECHybridLoss9DBM(1),

ECHybridLoss0DBM(2),

ECHybridLos

s3DBM(3)

Online 0 Sets the worst case ratio between the signallevel transmitted to the hybrid and the echo levelreturning from hybrid. Set this per worst hybrid inthe system in terms of echo return loss. Refer tothe enumeration acTECHybridLoss.

0 = 6 dBm1 = 9 dBm

2 = 0 dBm3 = 3 dBmMib name: acVoiceECHybridLossINI Name: ECHYBRIDLOSSProfile name: Digital VoP Media Profile

ToneDetector


Online 0 Used to configure the Echo Canceler ToneDetector. Detects a 2100 Hz tone at the inputsignal to the TDM (received signal). ImprovesEcho Canceler operation accordingly. Detects2100, 2100 with phase reversals and 2100 withAM. Improves the operation of the EchoCanceler by slowing adaptation when the signal

is detected. This data is also used by the faxstate machine.0 = Disable1 = EnableMib name: acVoiceECToneDetectorINI Name: ECENABLETONEDETECTORProfile name: Digital VoP Media Profile

ComfortNoise

Generation


Online 0 Use this parameter to enable or enable EchoCanceler Comfort Noise Generation, whichgenerates comfort noise when the Non LinearProcessor (NLP) is active.When the NLP ascertains that the signal is echoand not doubletalk and decides to clip, instead of

transmitting silence it transmits a synthesizedsignal similar to the background noise.0 = Disable1 = EnableMib name: acVoiceECComfortNoiseGenerationINI Name:ECENABLECOMFORTNOISEGENERATIONProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

SilenceCompressio

n Mode

Enum:SILENCE-

COMPRESIO

N-DISABLE(0),SILENCE-

COMPRESION-

ENABLE(1),SILENCE-

COMPRESION-ENABLE-

NOISE-ADAPTATIO

N-DISABLE(2)

Online 0 Enables or disables Silence Suppression Mode.

0 = Disable =

SILENCE_COMPRESION_DISABLE1 = Enable =SILENCE_COMPRESION_ENABLE2 = Enable without adaptation =SILENCE_COMPRESION_ENABLE_NOISE_ADAPTATION_DISABLEMib name: acVoiceSCModeINI Name: ENABLESILENCECOMPRESSIONProfile name: Digital VoP Media Profile

AutomaticGain Control

AGC Enable Enum:Disable(0),Enable(1)

Online 0 Activates the AGC (Automatic Gain Control).0 = Disable1 = EnableMib name: acVoiceAGCEnableINI Name: ENABLEAGCProfile name: Digital VoP Media Profile

Gain Slope Integer0-31

Online 0 Determines the AGC (Automatic Gain Control)convergence rate.Range = 0 to 31 (according to

acTAGCGainSlope)Default = 3 (= 1 db/sec)Mib name: acVoiceAGCGainSlopeINI Name: AGCGAINSLOPEProfile name: Digital VoP Media Profile

Redirection Integer0-1

Online 0 Determines the AGC (Automatic Gain Control)direction.0 = AGC works on signals from the TDM side1 = AGC works on signals coming from theNetwork sideMib name: acVoiceAGCRedirectionINI Name: AGCREDIRECTION

Profile name: Digital VoP Media ProfileTargetEnergy

Integer0-63

Online 0 Determines the signal energy value [-dBm] thatthe AGC (Automatic Gain Control) attempts toattain.

Range = 0 to 63Mib name: acVoiceAGCTargetEnergyINI Name: AGCTARGETENERGYProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

MinimalGain (dB)

Integer0-31

Offline 20 Defines the minimum gain by the AGC whenactivated [- db].

Range = 0 to -31Mib name: acVoiceAGCMinGainINI Name: AGCMINGAINProfile name: Digital VoP Media Profile

MaximalGain (dB)

Integer0-18

Offline 15 Defines the maximum gain by the AGC whenactivated [db].

Range = 0 to 18Mib name: acVoiceAGCMaxGainINI Name: AGCMAXGAINProfile name: Digital VoP Media Profile

Disable FastAdaptation Enum:Disable(0),Enable(1)

Offline 0 Disables the AGC Fast Adaptation mode.Enable = 1Disable = 0Mib name: acVoiceAGCDisableFastAdaptationINI Name: AGCDISABLEFASTADAPTATIONProfile name: Digital VoP Media Profile

Coders

EVRC Enum:variableRate(

0),ac1kbps(1),

ac4kbps(2),ac8kbps(3)

Online 1 This parameter is used to configure the EVRCcoder bit rate.0 = Variable Rate1 = 1 kbps

2 = 4 kbps3 = 8 kbpsMib name: acVoiceCoderRateEVRCINI Name: EVRCRATEProfile name: Digital VoP Media Profile

QCELP8 Enum:variableRate(

0),ac1kbps(1),ac2kbps(2),ac4kbps(3),ac8kbps(4)

Online 1 This parameter is used to configure the QCELP8coder bit rate.0 = Variable Rate1 = 1 kbps2 = 2 kbps3 = 4 kbps4 = 8 kbpsMib name: acVoiceCoderRateQCELP8INI Name: QCELP8RATEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

QCELP13 Enum:variableRate(

0),

ac1kbps(1),ac3kbps(2),ac7kbps(3),ac13kbps(4)

Online 1 This parameter is used to configure theQCELP13 coder bit rate.0 = Variable Rate

1 = 1 kbps2 = 3 kbps3 = 7 kbps4 = 13 kbps

Mib name: acVoiceCoderRateQCELP13INI Name: QCELP13RATEProfile name: Digital VoP Media Profile

G729 EVMax Bit

Rate

Enum:G729EV-RATE-8-

KBPS (0),G729EV-RATE-12-KBPS (1),G729EV-RATE-14-KBPS (2),G729EV-RATE-16-KBPS (3),G729EV-RATE-18-KBPS (4),

G729EV-RATE-20-KBPS (5),G729EV-RATE-22-KBPS (6),G729EV-RATE-24-KBPS (7),G729EV-RATE-26-KBPS (8),G729EV-

RATE-28-KBPS (9),G729EV-RATE-30-

KBPS (10),G729EV-RATE-32-

KBPS (11),G729EV-RATE-

UNDEFINED(15)

Online 0 Determines the maximum generation bitrate forall participants in a session using G729EVcoder. This parameter is defined per session

and is equal for all the parties. The initialgeneration bit rate is the minimum between theMaxBitRate and the MBS values.

Possible values are:0 = G729EV_RATE_8_KBPS1 = G729EV_RATE_12_KBPS2 = G729EV_RATE_14_KBPS3 = G729EV_RATE_16_KBPS4 = G729EV_RATE_18_KBPS5 = G729EV_RATE_20_KBPS6 = G729EV_RATE_22_KBPS7 = G729EV_RATE_24_KBPS

8 = G729EV_RATE_26_KBPS9 = G729EV_RATE_28_KBPS10 = G729EV_RATE_30_KBPS11 = G729EV_RATE_32_KBPS15 = G729EV_RATE_UNDEFINEDMib name:acVoiceCoderRateG729EVMaxBitRateINI Name: G729EVMAXBITRATEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

G729 EVLocal MBS

Enum:G729EV-RATE-8-

KBPS (0),G729EV-RATE-12-KBPS (1),G729EV-RATE-14-KBPS (2),G729EV-RATE-16-KBPS (3),G729EV-RATE-18-KBPS (4),G729EV-RATE-20-KBPS (5),G729EV-RATE-22-KBPS (6),G729EV-RATE-24-KBPS (7),G729EV-RATE-26-KBPS (8),G729EV-RATE-28-KBPS (9),G729EV-RATE-30-



UNDEFINED(15)

Online 0 Determines the maximal bitrate, which may beused by the G729EV coder at a specific channel.This parameter is defined per channel and mayvary between the parties. The initial generationbit rate is the minimum between the MaxBitRateand the MBS values.

Possible values are:0 = G729EV_RATE_8_KBPS1 = G729EV_RATE_12_KBPS2 = G729EV_RATE_14_KBPS3 = G729EV_RATE_16_KBPS4 = G729EV_RATE_18_KBPS5 = G729EV_RATE_20_KBPS6 = G729EV_RATE_22_KBPS7 = G729EV_RATE_24_KBPS8 = G729EV_RATE_26_KBPS9 = G729EV_RATE_28_KBPS10 = G729EV_RATE_30_KBPS11 = G729EV_RATE_32_KBPS15 = G729EV_RATE_UNDEFINEDMib name:acVoiceCoderRateG729EVLocalMBSINI Name: G729EVLOCALMBSProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

G729 EVReceive

MBS

Enum:G729EV-RATE-8-

KBPS (0),G729EV-RATE-12-KBPS (1),G729EV-RATE-14-KBPS (2),G729EV-RATE-16-KBPS (3),G729EV-RATE-18-KBPS (4),G729EV-RATE-20-KBPS (5),G729EV-RATE-22-KBPS (6),G729EV-RATE-24-KBPS (7),G729EV-RATE-26-KBPS (8),G729EV-RATE-28-KBPS (9),G729EV-RATE-30-



UNDEFINED(15)

Online 0 Determines the value of the MBS field of theG729EV frames to be sent to the other party.This parameter reflects the maximum bit rate,which the local G729EV supports as a receiver. Possible values are:0 = G729EV_RATE_8_KBPS1 = G729EV_RATE_12_KBPS2 = G729EV_RATE_14_KBPS3 = G729EV_RATE_16_KBPS4 = G729EV_RATE_18_KBPS5 = G729EV_RATE_20_KBPS6 = G729EV_RATE_22_KBPS7 = G729EV_RATE_24_KBPS8 = G729EV_RATE_26_KBPS9 = G729EV_RATE_28_KBPS10 = G729EV_RATE_30_KBPS11 = G729EV_RATE_32_KBPS15 = G729EV_RATE_UNDEFINEDMib name:acVoiceCoderRateG729EVReceiveMBSINI Name: G729EVRECEIVEMBSProfile name: Digital VoP Media Profile

MicrosoftRTA

ForwardError

CorrectionMode

Enum:disable(0),enable(1)

Online 1 Determines the Microsoft RTA coder forwarderror correction mode.

0 - Disable.1 - Enable.Mib name:acVoiceCoderRateMsRtaForwardErrorCorrectionEnableINI Name:MSRTAFORWARDERRORCORRECTIONENABLEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

MicrosoftRTA Bit

Rate

Integer0-29000

Online 0 Determines the Microsoft RTA coder TX bit rate. 0 - Automatic.

Any value between 8,800 - 29,000.Mib name: acVoiceCoderRateMsRtaTxBitRateINI Name: MSRTATXBITRATEProfile name: Digital VoP Media Profile

VBR CoderDTX Min

Integer0-20000

Online 0 Defines the minimum number of frames gapbetween two SID frames, when using the EVRCvoice activity detector.

Mib name: acVoiceSCVBRCoderDTXMinINI Name: EVRCDTXMINProfile name: Digital VoP Media Profile

VBR CoderDTX Max Integer0-20000 Online 0 Defines the maximum number of frames gapbetween two SID frames, when using the EVRCvoice activity detector.Mib name: acVoiceSCVBRCoderDTXMaxINI Name: EVRCDTXMAXProfile name: Digital VoP Media Profile

VBR CoderHangover

Integer0-255

Online 0 For indicating the desired number of silenceframes at the beginning of each silence period,when using the VBR CODER silencesuppression.

Mib name: acVoiceSCVBRCoderHangoverINI Name: VBRCODERHANGOVER


7/23/2019 LTRT-32105 Mediant 3000




2.4.3 Tab: Caller ID Settings

Frame: Media Provis ioning (TP-8410), Tab: Caller ID Settings

ParameterName


DefaultValue

Description

Caller IdTypes

Enum:Bellcore (0), ETSI(1), NTT (2), BT

(4), DTMF-Based-ETSI (16),

Denmark (17),Indian (18),

Brazilian (19)

Online 0 Defines the supported Caller ID standard.0 = Bellcore1 = ETSI2 = NTT4 = British16 = ETSI_ETS17 = Denmark18 = Indian19 = Brazilian

Mib name: acCallerIDTypesINI Name: CALLERIDTYPEProfile name: Digital VoP Media Profile

TransportType

Enum:CallerID-

DISABLE(0),CallerID-

RELAY(1),CallerID-MUTE(3)

Online 0 Defines the CallerID Transport type.

0 = Disable1 = Relay3 = MuteMib name: acCallerIDTransportTypeINI Name: CALLERIDTRANSPORTTYPEProfile name: Digital VoP Media Profile

DTMF Based

Max Digits

Integer

0-26

Online 0 Determines the maximum number of DTMF

digits in a DTMF-based Caller ID string.

Range = 0 to 26Mib name:acCallerIDDTMFBasedMaxDigitsINI Name:MAXDTMFDIGITSINCIDSTRINGProfile name: Digital VoP Media Profile

DTMF BasedMin Digits

Integer0-26

Online 0 Determines the mimumum number ofDTMF digits in a DTMF-based Caller IDstring.

Range = 0 to 26Mib name: acCallerIDDTMFBasedMinDigitsINI Name: MINDTMFDIGITSINCIDSTRINGProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.4.4 Tab: Bypass Settings

Frame: Media Provisioning (TP-8410), Tab: Bypass Settings

ParameterName


DefaultValue

Description

Coder Type Enum:G711Alaw-

64(0),G711Mulaw

(1)

Online 0 Users can use this parameter to set thefax/modem bypass coder (according toacTCoders).

0 = G.711 A-Law1 = G.711 Mu-LawMib name: acFMBypassCoderTypeINI Name: FAXMODEMBYPASSCODERTYPEProfile name: Digital VoP Media Profile

Packetization Period

Integer1-12

Online 1 Defines the number of basic frames to generateone RTP fax/modem bypass packet.Mib name: acFMBypassPacketizationPeriodINI Name: FAXMODEMBYPASSMProfile name: Digital VoP Media Profile

BasicPacketInterval

Enum:PACKET-

INTERVAL-DEFAULT(0), PACKET-INTERVAL-5-MSEC(1),

PACKET-INTERVAL-10-

MSEC(2),PACKET-

INTERVAL-20-

MSEC(3)

Online 0 Sets the basic Fax / Modem Bypass RTP packetrate.0 = Default (set internally)(PACKET_INTERVAL_DEFAULT)1 = 5 msec (PACKET_INTERVAL_5_MSEC)2 = 10 msec (PACKET_INTERVAL_10_MSEC)3 = 20 msec (PACKET_INTERVAL_20_MSEC)

Mib name: acFMBypassBasicPacketIntervalINI Name:FAXMODEMBYPASSBASICRTPPACKETINTERVALProfile name: Digital VoP Media Profile

DynamicJitter Buffer

MinimalDelay (ms)

Integer0-150

Online 0 Determines the Jitter Buffer constant delay (inmilliseconds) during a Fax And Modem Bypasssession. (The minimum Jitter Buffer Size).

Range = 0 to 150Mib name: acFMBypassDJBufMinDelayINI Name:FAXMODEMBYPASDJBUFMINDELAYProfile name: Digital VoP Media Profile

NSEPayload

Type

Integer96-127

Online 96 Users can use this parameter to modify the NSEpacket's payload type.

Range = 96 to 127Mib name: acFMNSEPayloadTypeINI Name: NSEPAYLOADTYPEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

NSE Mode Enum:Disable(0),Enable(1)

Online 0 Enables or disables Cisco's NSE fax / modemautomatic pass-through mode.

0 = Disable1 = EnableMib name: acFMNSEModeINI Name: NSEMODEProfile name: Digital VoP Media Profile

EnableInband

NetworkDetection


Online 0 Enables or disables inband network detectionrelated to fax/modem.

0 = Disable1 = EnableMib name:acFMCommonEnableInbandNetworkDetection

INI Name:ENABLEFAXMODEMINBANDNETWORKDETECTIONProfile name: Digital VoP Media Profile

Fax BypassPayload

Type

Integer0-127

Online 0 Users can use this parameter to modify the FaxBypass Mode RTP packet's payload type.In the case of congestion (if the selectedpayload type is already used for othercoders/modes), then aTP_SETUP_PARAMETER_INVALID_ERROR isissued and the payload type is set to the defaultvalue (102).

It is the user's responsibility to avoid congestionwith other payload types.

Range = 0 to 127Mib name: acFaxBypassPayloadTypeINI Name: FAXBYPASSPAYLOADTYPEProfile name: Digital VoP Media Profile

ModemBypassPayload

Type

Integer0-127

Online 0 Users can use this parameter to modify theModem Bypass Mode RTP packet's payloadtype.In the case of congestion (if the selectedpayload type is already used for othercoders/modes), then a

TP_SETUP_PARAMETER_INVALID_ERROR isissued and the payload type is set to the defaultvalue (103).It is the user's responsibility to avoid congestionwith other payload types.

Range = 0 to 127Mib name: acModemBypassPayloadTypeINI Name: MODEMBYPASSPAYLOADTYPEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Fax BypassOutput Gain

Integer-31-31

Online -31 Defines the fax bypass output gain control.Range: -31 dB to +31 dB in 1 dB stepsDefault = 0 = No Gain.

Mib name: acFMBypassFaxBypassOutputGainINI Name: FAXBYPASSOUTPUTGAINProfile name: Digital VoP Media Profile

ModemBypass

Output Gain

Integer-31-31

Online -31 Defines the modem bypass output gain control.Range: -31 dB to +31 dB in 1 dB stepsDefault = 0 = No GainMib name:acFMBypassModemBypassOutputGainINI Name: MODEMBYPASSOUTPUTGAINProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




2.4.5 Tab: FAX Settings

Frame: Media Prov isioning (TP-8410), Tab: FAX Settings

ParameterName


Default Value

Descript ion

TransportMode

Enum:Disable(0),


EventsOnly(3)

Online 0 Sets the Fax over IP transport method.

0 = Transparent1 = Relay2 = Bypass3 = Transparent with EventsMib name: acFaxTransportModeINI Name: FAXTRANSPORTMODEProfile name: Digital VoP Media Profile

Relay ECMEnable


Online 0 Enables or disables the using of ECM modeduring Fax Relay.

0 = Disable1 = EnableMib name: acFaxRelayECMEnableINI Name: FAXRELAYECMENABLEProfile name: Digital VoP Media Profile

Relay MaxRate

Enum:acRate2400bps(0),acRate4800bps(1),acRate7200bps(2),

acRate9600bps(3),acRate12000bps(4),

acRate14400bps(5),

acRate16800bps(6),

acRate19200b(7),acRate21600bps(8

),acRate24000bps(9

),acRate26400bps(1

0),acRate28800bps(1

1),acRate31200bps(1

2),acRate33600bps(1

3)

Online 0 Limits the maximum rate at which faxmessages are transmitted.

0 = 2400 bps

1 = 4800 bps2 = 7200 bps3 = 9600 bps4 = 12000 bps5 = 14400 bps6 = 16800 bps7 = 19200 bps8 = 21600 bps9 = 24000 bps10 = 26400 bps11 = 28800 bps12 = 31200 bps13 = 33600bps

Mib name: acFaxRelayMaxRateINI Name: FAXRELAYMAXRATEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


Default Value

Descript ion

RelayRedundanc

y Depth

Integer0-2

Online 0 Determines the depth of redundancy for faxpackets. This parameter is applicable only tonon-V.21 packets.

0 = No redundancy1 = 1 packet redundancy2 = 2 packet redundancyMib name: acFaxRelayRedundancyDepthINI Name: FAXRELAYREDUNDANCYDEPTHProfile name: Digital VoP Media Profile

EnhancedRelay

Redundancy Depth

Integer0-4

Online 0 Determines the number of repetitions to beapplied to control packets when using the T.38standard.

0 = No redundancy

1 = 1 packet redundancy2 = 2 packet redundancy3 = 3 packet redundancy4 = Maximum redundancyMib name:acFaxEnhancedRelayRedundancyDepthINI Name:FAXRELAYENHANCEDREDUNDANCYDEPTHProfile name: Digital VoP Media Profile

CNGDetector

Mode

Enum:CNG-DETECTOR-

MODE-DISABLE(0), CNG-DETECTOR-

MODE-RELAY(1),CNG-DETECTOR-

MODE-EVENT-ONLY(2)

Online 0 Determines the CNG Detector mode.0 = Disable

1 = Relay2 = Event OnlyMib name: acFaxCNGDetectorModeINI Name: CNGDETECTORMODEProfile name: Digital VoP Media Profile

RelayVolume(dBm)

Integer-18--3

Online -18 Determines the fax gain control.

The range -18 to -3 relates to -18.5 dBm to -3.5 dBm in steps of 1 dBm.Mib name: acFMCommonRelayVolumeINI Name: FAXMODEMRELAYVOLUME


V34TransportMethod

Enum:Disable(0),


EventsOnly(3)

Online 0 Determines the V.34 fax transport method.


0 = Transparent1 = Relay2 = Bypass3 = Transparent with EventsMib name: acFaxV34TransportMethodINI Name: V34FAXTRANSPORTTYPEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


Default Value

Descript ion

T38 Version Enum:T38Version0(0),T38Version3(3)

Online 3 T38 fax relay version.

0 = T.38 version 0 (from 06/1998)

3 = T.38 version 3 (V.34 over T.38 support)

Default = 3Mib name: acFaxT38VersionINI Name: T38VERSIONProfile name: Digital VoP Media Profile

2.4.6 Tab: Modem Settings

Frame: Media Provisioning (TP-8410), Tab: Modem Settings

ParameterName


DefaultValue

Description

V21Transport

Enum:Disable(0),


EventsOnly(3)

Online 0 Sets the V.21 modem transport method(must be set to 0 = Disable).


V22Transport

Enum:Disable(0),


EventsOnly(3)



V23Transport

Enum:Disable(0),


EventsOnly(3)

Online 0 Sets the V.23 modem transport method.0 = Transparent2 = Bypass3 = Transparent with Events

Mib name: acModemV23TransportINI Name: V23MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile

V32Transport

Enum:Disable(0),


EventsOnly(3),AnsMute(4)


0 = Transparent2 = Bypass3 = Transparent with Events4 = AnsMuteMib name: acModemV32TransportINI Name: V32MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

BellTransport

Type

Enum:Disable(0),

ByPassEnable(2),

EventsOnly(3)

Online 0 Use this parameter to set the Bell modemtransport method.0 = Transparent

2 = Bypass (enum ByPassEnable)3 = Transparent with Events (enumEventsOnly)Mib name: acModemBellTransportTypeINI Name:BELLMODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile

V34Transport

Enum:Disable(0),


EventsOnly(3),

AnsMute(4)


0 = Transparent2 = Bypass3 = Transparent with Events

4 = AnsMuteMib name: acFMCommonV34TransportINI Name: V34MODEMTRANSPORTTYPEProfile name: Digital VoP Media Profile

V150.1

AllocationProfile

Integer0-21

Offline 0 Selects the V.150.1 profile, determininghow many DSP channels have V.150.1support.

Range = 0 to 3Mib name: acV150dot1AllocationProfileINI Name: V1501ALLOCATIONPROFILE


SSE PayloadType Rx

Integer96-127

Online 105 SSE payload type RXMib name: acV150dot1SSEPayloadTypeRxINI Name: V1501SSEPAYLOADTYPERXProfile name: Digital VoP Media Profile

SSERedundancy

Depth

Integer1-6

Online 3 SSE is a part of V150.1 modem relayprotocol and SSE messages are sent overRTP.SSE redundancy refers to the sending ofSSE messages several times to increasereliability. This parameter determines thenumber of times each SSE message is tobe resent.Mib name:acV150dot1SSERedundancyDepthINI Name:V1501SSEREDUNDANCYDEPTHProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




2.4.7 Tab: In-Band-Signaling

Frame: Media Prov isioning (TP-8410), Tab: In-Band-Signaling

ParameterName


DefaultValue

Description

DTMFVolume(dBm)

Integer-31-0

Online -31 Defines and controls the DTMFgeneration volume [-dBm].

Range = -31 to 0Mib name: acIBSDTMFVolumeINI Name: DTMFVOLUMEProfile name: Digital VoP Media Profile

DTMFTransport

Type

Enum:acMuteDTMF(0),

acTransparentDTMF(2)

,acRFC2833RelayDTM

F(3),acRFC2833RelayDeco

derMute(7)

Online 0 Defines the type of DTMF transport.

0 = Erase DTMFs from voice transport

not relayed to remote2 = DTMFs not erased are not relayed toremote3 = DTMFs are muted from the voicestream and relayed according to RFC28337 = DTMFs are sent according to RFC2833 and muted when receivedMib name: acIBSDTMFTransportTypeINI Name: DTMFTRANSPORTTYPEProfile name: Digital VoP Media Profile

CAS Relay

TransportMode

Enum:

CASEventsOnly(0),CASRFC2833Relay(1)

Online 0 Controls the ABCD signaling transport

type over IP.0 = No Relay over the network1 = Enable CAS relay according to RFC2833Mib name:acIBSCASRelayTransportModeINI Name: CASTRANSPORTTYPEProfile name: Digital VoP Media Profile

Rx DTMFRelay HangOver Time

(msec)

Integer0-2000

Online 0 Used to configure the Voice Silence time(in ms units) after playing DTMF or MFdigits to the TDM side that arrived asRelay from the Network side.

Range from 0 to 2000, Default 1000.Mib name: acIBSRxDtmfHangOverTimeINI Name: RXDTMFHANGOVERTIMEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Tx DTMFRelay HangOver Time

(msec)

Integer0-2000

Online 0 Voice Silence time (in ms units) afterdetecting the end of DTMF or MF digitsat the TDM side when the DTMF

Transport Type is either Relay orMute.This feature allows the user toconfigure the silence time.

Mib name: acIBSTxDtmfHangOverTimeINI Name: TXDTMFHANGOVERTIMEProfile name: Digital VoP Media Profile

DTMF TwistControl

Integer-10-10

Offline 0 Defines a delta (in dB) between the highand low frequency component in theDTMF signal. dB Positive values causethe higher frequency component to bestronger than the lower one. Negative

values cause the opposite effect. Forany parameter value, both componentschange so that their average is constant. Range = -10 to 10Mib name: acIBSDTMFTwistControlINI Name: DTMFGENERATIONTWISTProfile name: Digital VoP Media Profile

Detector

TrunkTestingTones

Detector

Enum:Disables (0), Enables

(1)

Offline 0 Enables or disables trunk testing tones.0 = Disables trunk testing tones1 = Enables trunk testing tones

Mib name:acIBSTrunkTestingTonesEnableINI Name:ENABLETRUNKTESTINGTONESProfile name: Digital VoP Media Profile

MF R1Enable


Online 0 Enables or disables detection of MFR1signaling.0 = Disable1 = EnableMib name: acIBSDetectorsMFR1EnableINI Name: MFR1DETECTORENABLEProfile name: Digital VoP Media Profile

MF R2ForwardEnable


Online 0 Enables or disables detection of MFR2forward signaling.0 = Disable1 = EnableMib name:acIBSDetectorsMFR2ForwardEnableINI Name:MFR2FORWARDDETECTORENABLEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

MF R2Backward

Enable


Online 0 Enables or disables detection of MFR2backward signalingMib name:

acIBSDetectorsMFR2BackwardEnableINI Name:MFR2BACKWARDDETECTORENABLEProfile name: Digital VoP Media Profile

R1 LineEnable


Online 0 Enables or disables detection of Linesignaling.0 = Disable1 = EnableMib name:acIBSDetectorsR1LineEnableINI Name: R1LINEDETECTORENABLEProfile name: Digital VoP Media Profile

DTMFEnable


Online 0 Enables or disables detection of DTMFsignaling.

0 = Disable1 = EnableMib name: acIBSDetectorsDTMFEnableINI Name: DTMFDETECTORENABLEProfile name: Digital VoP Media Profile

CallProgressEnable


Online 0 Enables or disables detection of CallProgress Tones.

0 = Disable

1 = EnableMib name:acIBSDetectorsCallProgressEnableINI Name:CALLPROGRESSDETECTORENABLEProfile name: Digital VoP Media Profile

UserDefined

ToneEnable


Online 0 Enables or disables detection of UserDefined Tones signaling.

0 = Disable1 = EnableMib name:

acIBSDetectorsUserDefinedToneEnableINI Name:USERDEFINEDTONEDETECTORENABLEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

DetectionRedirection

Enum:pcm(0), network(1)

Online 0 Determines the IBS (In-Band Signaling)Detection Direction.

0 = PCM1 = NetworkMib name:acIBSDetectorsDetectionRedirectionINI Name:IBSDETECTIONREDIRECTIONProfile name: Digital VoP Media Profile

SIT Enable Enum:Disable(0), Enable(1)

Offline 0 Enables or disables SIT (SpecialInformation Tone) detection according tothe ITU-T recommendation E.180/Q.35. 0 = Disable

1 = EnableMib name: acIBSDetectorsSITEnableINI Name: SITDETECTORENABLEProfile name: Digital VoP Media Profile

COT Enable Enum:Disable(0), Enable(1)

Offline 0 Enables or disables Continuity Test tonedetection and generation according tothe ITU-T Q.724 recommendation.

0 = Disable1 = EnableMib name: acIBSDetectorsCOTEnableINI Name:

ENABLECONTINUITYTONESProfile name: Digital VoP Media Profile

R1.5DetectionStandard

Enum:MfR1DetectionStandar

dItu (0),MfR1DetectionStandar

dR15 (1)

Offline 0 This parameter determines which one ofthe R1 MF protocol flavors will be usedfor detection.

0 = ITU1 = R1.5Mib name:acIBSDetectorsR1DetectionStandardINI Name: R1DETECTIONSTANDARDProfile name: Digital VoP Media Profile

UDTDetector

FrequencyDeviation

Integer1-50

Offline 50 Defines the deviation allowed for thedetection of each signal frequency. Unitsare in Hertz.Valid values range 1-50.Default value 50 Hz.

Mib name:acIBSDetectorsUDTDetectorFrequencyDeviationINI Name:UDTDETECTORFREQUENCYDEVIATIONProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

CPTDetector

Frequency

Deviation

Integer1-30

Offline 10 Defines the deviation allowed for thedetection of each CPT signal frequency.Units are in Hertz.

Valid values range 1-30.Default value 10 Hz.

Mib name:acIBSDetectorsCPTDetectorFrequencyDeviationINI Name:CPTDETECTORFREQUENCYDEVIATIONProfile name: Digital VoP Media Profile

2.4.8 Tab: RTP Settings

Frame: Media Provis ioning (TP-8410), Tab: RTP Settings

ParameterName


DefaultValue

Description

Base UDPPort

Integer1024-65535

Offline 4000 Defines the lower boundary of UDP portsto be used by the board. The upperboundary is calculated on the basis ofBoardBaseUDPPort + 10 * (Number ofChannels). This parameter value must be

a multiple of 10.

Mib name: acRtpBaseUDPPortINI Name: BASEUDPPORTProfile name: Digital VoP Media Profile

Disable NAT Enum:No(0), Yes(1)

Online 0 Enables or disables the NAT feature.0 = Do not disable NAT1 = Disable NATMib name: acMediaNetworkDisableNATINI Name: DISABLENATProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

ComfortNoiseEnable


Online 0 When set to 1 (Enable), SID packets aresent with the RTP SID type (RFC 3389).0 = Disable

1 = EnableDetermines whether Silence Indicator(SID) packets that are sent and receivedare according to RFC 3389.0 = Disabled (default).1 = Enabled.Note: Applicable only to MP-11x andMediant 1000.

Mib name: acRtpComfortNoiseEnableINI Name:ENABLESTANDARDSIDPAYLOADTYPEProfile name: Digital VoP Media Profile

RFC2833Tx Payload

Type

Integer96-127

Online 96 Controls the RFC 2833 Tx Relay RTPPayload type.

Range = 96 to 127Mib name: acRtpRFC2833TxPayloadTypeINI Name: RFC2833TXPAYLOADTYPEProfile name: Digital VoP Media Profile

RFC2833Rx Payload

Type

Integer96-127

Online 96 Controls the RFC 2833 Rx Relay RTPPayload type.

Range = 96 to 127

Mib name:acRtpRFC2833RxPayloadTypeINI Name: RFC2833RXPAYLOADTYPEProfile name: Digital VoP Media Profile

NTE MaxDuration

Integer-1-200000000

Online -1 Maximal time for sending NTEs (NamedTelephony Events) to the network,regardless of the time range when theTDM signal is detected.

-1= NTE will stop only upon detection ofEnd event (default).Mib name: acIBSNTEMaxDurationINI Name: NTEMAXDURATION


RedundancyPayload

Type

Integer96-127

Online 96 This parameter sets the RFC 2198 (RTPRedundancy) packet's parameter 'RTPPayload Type'.

Range: 96 to 127Mib name:acRtpRedundancyPayloadTypeINI Name: RFC2198PAYLOADTYPEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

RedundancyDepth

Enum:NoRedundancy(0),RedundacnyDepth(

1)

Online 0 Redundancy depth of RFC 2198redundancy packets.

0 = No redundancy1 = Redundacny depthMib name: acRtpRedundancyDepthINI Name: RTPREDUNDANCYDEPTHProfile name: Digital VoP Media Profile

Packetization Factor

Integer1-12

Online 1 Defines the number of DSP payloads forgenerating one RTP packet.Range = Hardware dependentMib name: acRtpPacketizationFactorINI Name: RTPPACKINGFACTORProfile name: Digital VoP Media Profile

No OpEnable Enum:Disable(0),Enable(1)

Online 0 Enables / disable Noop packets sendingmode.

0 = Disable1 = EnableMib name: acRtpNoOpEnableINI Name: NOOPENABLEProfile name: Digital VoP Media Profile

No OpPayload

Type

Integer96-127

Online 96 User can modify the Noop packets RTPPayload type by setting this parameter.

Range = 96 to 127Mib name: acRtpNoOpPayloadType

INI Name: RTPNOOPPAYLOADTYPEProfile name: Digital VoP Media Profile

No OpInterval

Integer20-600000

Online 20 Used to modify the Noop packets sendinginterval

Parameter value is in millisecondsDefault value = 10 sec (10000 msec)

Range = 20 to 600000(20 msec to 10 min - 10 min = 600000)Mib name: acRtpNoOpIntervalINI Name: NOOPINTERVAL


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

VBR CoderHeaderFormat

Enum:WithOut-

RFC2658Interleavin

g-And-TOC(0),Including-

RFC2658Interleaving-And-TOC(1),Including-TOC-

Only(2), Interleave-Bundling(3)

Online 0 0 - payload only (no header, no toc, no m-factor)

1- support RFC 2658 format, 1 byte forinterleaving header (always 0) and toc, nom-factor

2 ? payload including toc only, allow m-factor

3- RFC 3358 format

Mib name: acRtpVBRCoderHeaderFormatINI Name:VBRCODERHEADERFORMATProfile name: Digital VoP Media Profile

AMR CoderHeaderFormat

Enum:CE-AMR-

DEFAULT-FORMAT(0), CE-AMR-RFC-3267-

BUNDLING(1), CE-AMR-RFC-3267-

INTERLEAVING(2),CE-AMR-IF2(3)

Online 0 AMR_CODER_HEADER_DEFAULT_FORMAT=0 - old m factor, each framecontains CRM byte and tocRFC_3267_BUNDLING=1 - single CRMbyte followed by toc tablesRFC_3267_INTERLEAVING=2 -supported as receivers onlyMib name:acRtpAMRCoderHeaderFormatINI Name:AMRCODERHEADERFORMATProfile name: Digital VoP Media Profile

BrokenConnection

EventTimeout

Integer3-2684354

Online 3 Determines for how long the RTPconnection should be broken before theBroken Connection event is issued. Inunits of 100 msec.

Mib name:acRtpRtcpBrokenConnectionEventTimeoutINI Name:BROKENCONNECTIONEVENTTIMEOUTProfile name: Digital VoP Media Profile

Broken

ConnectionEvent

ActivationMode

Enum:

AfterFirstIncomingRTPPacket(0),

OnRTPStreamActivation(1)

Online 0 Determines if the broken connection

mechanism is activated when the RTPstream is activated or when the first RTPpacket is received.0 = After First incoming packet (default)1 = Upon channel?s RTP activation.

Mib name:acRtpRtcpBrokenConnectionEventActivationModeINI Name:BROKENCONNECTIONEVENTACTIVATIONMODEProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Basic RTPPacketInterval

Enum:PACKET-

INTERVAL-

DEFAULT(0),PACKET-

INTERVAL-5-MSEC(1), PACKET-

INTERVAL-10-MSEC(2), PACKET-

INTERVAL-20-MSEC(3)

Online 0 Selects the RTP packet rate for samplebased coders (such as G.711, G.726,G.727). Also applicable for G.729, G.729E

And G.728.0 = Default (set internally)1 = 5 msec2 = 10 msec3 = 20 msecMib name:acRtpRtcpBasicRTPPacketIntervalINI Name: BASICRTPPACKETINTERVALProfile name: Digital VoP Media Profile

ConnectionEstablish

Notification

Mode

Enum:AfterBrokenConnect

ion(0),

UponFirstRTPFrameDetection(1)

Online 0 Determines the notification mode for theRTP connection establishment eventacEV_CONNECTION_ESTABLISHED.

0 = Notify only after a broken connectionevent1 = Also notify when the first RTP packetis receivedMib name:acRtpRtcpConnectionEstablishNotificationModeINI Name:CONNECTIONESTABLISHEMENTNOTIFICATIONMODEProfile name: Digital VoP Media Profile

AMR FEC

RedundancyDepth

Enum:

CE-AMR-FEC-REDUNDANCY-LEVEL-NONE(0),

CE-AMR-FEC-REDUNDANCY-LEVEL-1(1), CE-

AMR-FEC-REDUNDANCY-LEVEL-2(2), CE-

AMR-FEC-REDUNDANCY-

LEVEL-3(3)

Online 0 Sets the AMR / WB-AMR Redundancy

depth according to RFC 3267.

0 = No Redundancy1 = Redundancy depth of a single packet2 = Redundancy depth of 2 packets3 = Redundancy depth of 3 packets

Mib name:acRtpAMRFECRedundancyDepthINI Name:AMRFECREDUNDANCYDEPTHProfile name: Digital VoP Media Profile

AMR FEC

Num OfMngt Policy

Entries

Integer

0-9

Online 0 Sets the number of entries to be defined

at the AMR management policy table.Each entry defines the policy of a differentrate.Mib name:acRtpAMRFECNumOfMngtPolicyEntriesINI Name:AMRFECNUMBEROFCODECMODESProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

AMR FECDelay

Hysteresis

Integer0-255

Online 0 Defines the hysteresis of the DelayThreshold for AMR Hand-out events (inmsec).

Mib name:acRtpAMRFECDelayHysteresisINI Name: AMRFECDELAYHYSTERESISProfile name: Digital VoP Media Profile

AMR FECDelay

Threshold

Integer0-255

Online 0 Defines the one-way delay value (inmsec) that may cause the AMR Hand Outreport.

0 = 'Hand Out' report is disabled (default).Mib name: acRtpAMRFECDelayThresholdINI Name:AMRFECDELAYTHRESHHOLD


2.4.9 Tab: SRTP Settings

Frame: Media Provisioning (TP-8410), Tab: SRTP Settings

ParameterName


DefaultValue

Description

Enable MediaSecurity

Enum:Disable(0),

Enable(1)

Offline 0 Enables or disables Media Security protocol(SRTP) . Enabling this parameter might reduce the

board channel capacity.

0 = Disable1 = EnableMib name: acVoiceEnableMediaSecurityINI Name: ENABLEMEDIASECURITYProfile name: Digital VoP Media Profile

Aria ProtocolSupport


Offline 0 Enables or disables Aria encryption protocol.Enabling this parameter might reduce the boardchannel capacity.

0 = Disable

1 = EnableSupported on TP6310 and TP8410Mib name: acVoiceAriaProtocolSupportINI Name: ARIAPROTOCOLSUPPORTProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

RTPAuthentication

Disable Tx


Online 0 On a secured RTP session, determines whether toenable Authentication on transmitted RTP packets.


0 = Enable1 = DisableMib name:acSysMediaEncriptionRTPAuthenticationDisableTxINI Name: RTPAUTHENTICATIONDISABLETXProfile name: Digital VoP Media Profile

RTPEncryptionDisable Tx


Online 0 On a secured RTP session, determines whether toenable Encryption on transmitted RTP packets.One of the following values:

0 = Enable1 = DisableMib name:acSysMediaEncriptionRTPEncryptionDisableTxINI Name: RTPENCRYPTIONDISABLETXProfile name: Digital VoP Media Profile

RTCPEncryptionDisable Tx


Online 0 On a secured RTP session, determines whether toenable Encryption on transmitted RTCP packets.One of the following values:

0 = Enable1 = Disable

Mib name:acSysMediaEncriptionRTCPEncryptionDisableTxINI Name: RTCPENCRYPTIONDISABLETXProfile name: Digital VoP Media Profile

Packet MKISize

Integer0-4

Online 0 Determines the size of the parameter Master KeyIdentifier (MKI) in SRTP Tx packets.


0 = MKI Disabled1 - 4 = size (bytes of MKI)Mib name: acSysSRTPPacketMKISizeINI Name: SRTPTXPACKETMKISIZE


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.4.10 Tab: Media Server Settings

Frame: Media Provis ioning (TP-8410), Tab: Media Server Settings

ParameterName


DefaultValue

Description

DSPDetector

DSPDetectors

Enable


Offline 0 Enables or disables DSP IP MediaDetectors. Enabling this parameter mightreduce the board channel capacity.

0 = Disable1 = EnableMib name: acIPMediaDSPDetectorsEnable

INI Name: ENABLEDSPIPMDETECTORSProfile name: Digital IPMedia VoP MediaServer Profile

AnswerDetector

AnswerDetectorEnable

Enum:No(0), Yes(1)

Online 0 Enables or disables activation of the AD(Answer Detector).0 = Disable1 = EnableMib name: acIPMAnswerDetectorEnableINI Name: ENABLEANSWERDETECTORProfile name: Digital IPMedia VoP MediaServer Profile

ActivityDelay

Integer0-128

Online 0 Controls (in 100 msec resolution) the timebetween sending Activation command(AnswerDetector = 1) and the time that thedetector actually starts to work.Range = 0 to 0x3FFMib name:acIPMAnswerDetectorActivityDelayINI Name:ANSWERDETECTORACTIVITYDELAYProfile name: Digital IPMedia VoP MediaServer Profile

SilenceTime

Integer0-128

Online 0 This parameter controls the silence timeperiod (in 100 msec resolution) from nospeech input until the END_OF_SPEECHevent is sent.10 = 1 secondRange = 0 to 0x3FFMib name:acIPMAnswerDetectorSilenceTimeINI Name:ANSWERDETECTORSILENCETIMEProfile name: Digital IPMedia VoP MediaServer Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Redirection Enum:speechPCMSideDet

ected(0),

speechIPSideDetected(1)

Online 0 Determines the AD (Answer Detector)Redirection.0 (PCM) = Speech from the PCM side is

detected1 (Network) = Speech from the IP side isdetectedMib name:acIPMAnswerDetectorRedirectionINI Name:ANSWERDETECTORREDIRECTIONProfile name: Digital IPMedia VoP MediaServer Profile

Sensitivity Integer0-7

Online 0 Controls the AD (Answer Detector)sensitivity.

The allowed values are different for differentboards:DSP Gen2-based products: range 0 - 2,default 0.DSP Gen2-based products: range 0 - 7,default 3.

Lowest value matches highest sensitivityand vice versa.Mib name: acIPMAnswerDetectorSensitivityINI Name:ANSWERDETECTORSENSITIVITYProfile name: Digital IPMedia VoP Media

Server Profile

EnergyDetector

EnergyDetectorEnable

Enum:No(0), Yes(1)

Online 0 Activates the ED (Energy Detector).0 = Disable1 = EnableMib name: acIPMEnergyDetectorEnableINI Name: ENABLEENERGYDETECTORProfile name: Digital IPMedia VoP MediaServer Profile

Quality

Factor

Integer

0-10

Online 0 Determines the ED's (Energy Detector's)

sensitivity (0 -10).0 = Insensitive10 = Most Sensitive

Range = 0 to 10Mib name:acIPMEnergyDetectorQualityFactorINI Name:ENERGYDETECTORQUALITYFACTORProfile name: Digital IPMedia VoP MediaServer Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Threshold Integer0-7

Online 0 Defines the ED's (Energy Detector's)threshold. A signal exceeding the thresholdinvokes an 'Above' or 'Below' event.

ActualThreshold = -44 dBm + (EDThreshold* 6)Default = 3 = -26 dBm

Range: 0 to 7Mib name: acIPMEnergyDetectorThresholdINI Name:ENERGYDETECTORTHRESHOLDProfile name: Digital IPMedia VoP MediaServer Profile

EnergyRedirection

Enum:TDM(0), Network(1)

Online 0 Selects the direction of the energydetection.

0 = Detect from the TDM side1 = Detect from the network sideMib name:acIPMEnergyDetectorEnergyRedirectionINI Name:ENERGYDETECTORREDIRECTIONProfile name: Digital IPMedia VoP MediaServer Profile

AMD

DetectionDirection

Enum:acAmdTdmDetectio

n(0),

acAmdNetworkDetection(1)

Online 0 Determines the AMD (Answer MachineDetector) detection direction.


0 = Detection from the TDM side1 = Detection from the Network sideMib name:acIPMediaAMDDetectionDirectionINI Name: AMDDETECTIONDIRECTIONProfile name: Digital IPMedia VoP MediaServer Profile


Online 3 Determines the AMD (Answer MachineDetector) detection sensitivity:

0 = Best detection of an answering machine7 = Best detection of a live callMib name: acIPMediaAMDSensitivityINI Name: AMDDETECTIONSENSITIVITYProfile name: Digital IPMedia VoP MediaServer Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

SensitivityParameter

Suit

Integer0-7

Online 0 Determines the serial number of the AMD(Answer Machine Detector) parameter suit:0 = USA Parameter Suit with normal

detection sensitivity resolution (8 sensitivitylevels)1 = USA Parameter Suit with high detectionsensitivity resolution (16 sensitivity levels)2-7 : other countries parameter suits with upto 16 sensitivity levels.Mib name:acIPMediaAMDSensitivityParameterSuitINI Name:AMDSENSITIVITYPARAMETERSUITProfile name: Digital IPMedia VoP MediaServer Profile

SensitivityLevel

Integer0-15

Online 8 Determines the AMD (Answer MachineDetector) level of detection sensitivity.It has 16 levels of sensitivity :0 = Best detection of an answering machine15 = Best detection of a live callMib name: acIPMediaAMDSensitivityLevelINI Name: AMDSENSITIVITYLEVELProfile name: Digital IPMedia VoP MediaServer Profile

Conference

ActiveSpeaker

NotificationMin Interval(100 msec)

Integer10-65535

Instant 10 Minimum interval between Active SpeakerNotification (ASN) events.

An ASN event reports on the activespeakers in a conference. The event isissued whenever the active speakerschange.units = 100 msMinimum configurable interval betweenevents is 500 ms (5 units).Mib name:acIPMConferenceGASNMinIntervalINI Name:ACTIVESPEAKERSNOTIFICATIONMININTERVALProfile name: Digital IPMedia VoP MediaServer Profile

EnergyThreshold

Integer0-39

Instant 0 Conference - Minimum energy level for auser to be included in Active SpeakerNotification (ASN) events (units: -dBm).Valid range 0 to (-39) dbm.Mib name:acIPMConferenceEnergythresholdINI Name:ACTIVESPEAKERENERGYTHRESHOLDProfile name: Digital IPMedia VoP MediaServer Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Enable HDConference


Offline 0 EnableDisable HD Conference.Mib name:acIPMConferenceEnableHDConference

INI Name: ENABLEHDCONFERENCEProfile name: Digital IPMedia VoP MediaServer Profile


Frame: Media Provisioning (TP-8410), Tab: Misc. Settings

ParameterName


DefaultValue

Description

TTYTransport

Type

Enum:Disable(0),

Inband-Relay(2),Bypass (1)

Online 0 Defines the transferring method of TTYsignals during a call

0 = Disable1= Bypass2 = Relay

Mib name: acVoiceTTYTransportTypeINI Name: TTYTRANSPORTTYPEProfile name: Digital VoP Media Profile

Enable MediaUDP

Checksum

Enum:Disable(0),

Enable(1)

Offline 0 Determines whether to enable the UDPchecksum calculation for RTP media TX

over IPv4. One of the following possiblevalues:

0 = Disable (No checksum: UDP checksumfor IPv4 TX = 0)1 = Enable (UDP checksum will be in theUDP header upon IPv4 TX)

Mib name:acRtpRtcpEnableMediaUDPChecksumINI Name:ENABLEMEDIAUDPCHECKSUMProfile name: Digital VoP Media Profile

7/23/2019 LTRT-32105 Mediant 3000




2.4.12 Tab: Video Settings

Frame: Media Provisioning (TP-8410), Tab: Video Settings

ParameterName


DefaultValue

Description

RTP &RTCP

VideoDisable

Rtcp IntervalRandomizati

on


Online 0 Determines whether to enable RTCP IntervalRandomization. One of the following values:0 Enable RTCP Interval Randomization1 Disable RTCP Interval Randomization

Mib name:acVideoRtpRtcpDisableRtcpIntervalRandomi

zationINI Name:VIDEODISABLERTCPINTERVALRANDOMIZATIONProfile name: Digital Video Settings Profile

Video RtcpMean TxInterval

Integer0-65535

Online 5000 Defines the mean interval between twotransmitted RTCP packets (milliseconds). Ifthe interval is set to 0, no RTCP packets aretransmitted at all.Mib name: acVideoRtpRtcpMeanTxIntervalINI Name: VIDEORTCPMEANTXINTERVALProfile name: Digital Video Settings Profile

VideoBroken

ConnectionActivation

Mode

Enum:AfterFirstIncoming

RtpPacket (0),OnRtpStreamActiv

ation (1)

Online 0 Broken connection event activation mode.0 - Activate broken connection after thearrival of the first RTP packet.1 - Activate broken connection immediatelyafter the Activate RTP command.

Mib name:acVideoRtpRtcpBrokenConnectionActivationModeINI Name:VIDEOBROKENCONNECTIONACTIVATIONMODE

Profile name: Digital Video Settings ProfileVideo

BrokenConnection

EventTimeout

Integer0-65535

Online 500 Timeout that defines when broken connectionevent occurs.Time resolution is 20msec.Mib name:acVideoRtpRtcpBrokenConnectionEventTimeoutINI Name:VIDEOBROKENCONNECTIONEVENTTIMEOUTProfile name: Digital Video Settings Profile

Video

Conference

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

VideoConferenceSwitching

Interval

Integer0-65535

Online 20 Determines the video view rotation interval inseconds. Applicable when using timer triggerswitching mode.

Mib name:acIPMVideoConferenceSwitchingIntervalINI Name:VIDEOCONFERENCESWITCHINGINTERVALProfile name: Digital Video Settings Profile

VideoEnableActive

SpeakerHighlight


Online 0 Highlights the speaker for participantsviewing a symmetric layout (2x2 or 3x3) .0 - Don't highlight active speaker.1 - Highlight active speaker.Mib name:acIPMVideoConferenceEnableActiveSpeaker

HighlightINI Name:VIDEOENABLEACTIVESPEAKERHIGHLIGHTProfile name: Digital Video Settings Profile

VideoConferenceParticipant

Type

Enum:Regular(2)

Online 0 Indicates a participant's capabilities in theconference.Regular (2) ? Regular participant who is ableto both send and receive video.

Mib name:acIPMVideoConferenceParticipantType

INI Name:VIDEOCONFERENCEPARTICIPANTTYPEProfile name: Digital Video Settings Profile


TriggerMode

Enum:TriggerMode-Speaker(0),

TriggerMode-Timer(1),

TriggerMode-Fixed(3)

Online 0 Participant trigger mode defines the triggerfor modifying the participant's view.Voice Activated Video Switch (0) ? Aparticipant?s view will be changed accordingto the active speakers? detection.Timer (1) ? A participant?s view is rotatedevery configured time among the differentvideo participants in the conference.Fixed (3) ? A participant?s view is fixed.

Mib name:acIPMVideoConferenceParticipantTriggerModeINI Name:VIDEOCONFERENCEPARTICIPANTTRIGGERMODEProfile name: Digital Video Settings Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description


Layout

Enum:Layout-

1XUSER(0),

Layout-2x2-USERS(1),Layout-3x3-USERS(2)

Online 1 Indicates the participant's view layout.1 user (0).2*2 users (1). All same size.

3*3 users (2). All same size.

Mib name:acIPMVideoConferenceParticipantLayoutINI Name:VIDEOCONFERENCEPARTICIPANTLAYOUTProfile name: Digital Video Settings Profile

VideoEnable

ConferenceParticipantSelf View

Enum:disable(0),

enable(1)

Online 0 Self view indication.0 - The participant cannot view himself

1 - The participant can view himselfMib name:acIPMVideoConferenceEnableConferenceParticipantSelfViewINI Name:VIDEOENABLECONFERENCEPARTICIPANTSELFVIEWProfile name: Digital Video Settings Profile

Jitter Buffer

Video JitterBuffer Min

Delay

Integer0-500

Online 100 Jitter buffer minimum delay in milliseconds.Must be less thanJitterBufferMaxDelay.

Mib name: acVideoJitterBufferMinDelayINI Name:VIDEOJITTERBUFFERMINDELAYProfile name: Digital Video Settings Profile

Video JitterBuffer Max

Delay

Integer0-500

Online 400 Jitter buffer maximum delay in milliseconds.Mib name: acVideoJitterBufferMaxDelayINI Name:VIDEOJITTERBUFFERMAXDELAYProfile name: Digital Video Settings Profile

Video DJBOptimization

Factor

Integer0-10

Online 7 JB Optimization Factor controls the jitterbuffer's adaptation ratesA High factor means fast adaptation when jitter increases, and a slow adaptation when jitter decrease.Small factor means slow adaptation when jitter increases, and a fast adaptation when jitter decreases.

Mib name:acVideoJitterBufferDJBOptimizationFactorINI Name:VIDEODJBOPTIMIZATIONFACTORProfile name: Digital Video Settings Profile

Video

Settings

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

VideoEncoder

Intra Interval

Integer0-65535

Online 50 Sets the frequency for the number of framesat which the encoder outputs an Intra frame.Mib name:

acMediaVideoConfigEncoderIntraIntervalINI Name:VIDEOENCODERINTRAINTERVALProfile name: Digital Video Settings Profile

Video MaxPacket Size

Integer1-1400

Online 1400 Sets the maximum packet size in bytes.Mib name:acMediaVideoConfigMaxPacketSizeINI Name: VIDEOMAXPACKETSIZEProfile name: Digital Video Settings Profile

VideoTarget

Bitrate

Integer1-384

Online 64 Sets the target output bit rate.Mib name: acMediaVideoConfigTargetBitrate

INI Name: VIDEOTARGETBITRATEProfile name: Digital Video Settings Profile

VideoQuality

ParameterFor RateControl

Integer0-31

Online 15 This value determines the trade off betweenvideo quality and frame rate. A low valueindicates a higher quality with a lower framerate and vice versa.Mib name:acMediaVideoConfigQualityParameterForRateControlINI Name:VIDEOQUALITYPARAMETERFORRATECONTROLProfile name: Digital Video Settings Profile

Video RateControlType

Enum:ceVideoConstantB

itRate (0),ceVideoVaribleBit

Rate(1)

Online 0 Sets bitrate output to either a constant or avariable bit rate.CBR (0) ? Constant Bit Rate.VBR (1) ? Variable Bit Rate. Target Bitrateindicates the target average output bit rate.

Mib name:acMediaVideoConfigRateControlTypeINI Name: VIDEORATECONTROLTYPEProfile name: Digital Video Settings Profile

VideoEnableReSyncHeader


Online 0 Indicates whether to add a video packetheader to every packet in order to increaseerror resilience.0 - Disable1 - EnableMib name:acMediaVideoConfigEnableReSyncHeaderINI Name: VIDEOENABLERESYNCHEADERProfile name: Digital Video Settings Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

EnableAudio VideoSynchroniza

tion


Online 1 Determines whether to enable audio andvideo synchronization.0 - No synchronization between audio and

video streams1 - Synchronization between audio and videostreams

Mib name:acMediaVideoConfigEnableAudioVideoSynchronizationINI Name:ENABLEAUDIOVIDEOSYNCHRONIZATIONProfile name: Digital Video Settings Profile

2.5 Frame: Megaco Parameters Provisioning

2.5.1 Tab: Megaco Settings

Frame: Megaco Parameters Provis ioning, Tab: Megaco Settings

ParameterName


DefaultValue

Descript ion

Compatibility

Profile

Integer

0-131071

Offline 0 ControlS MGCP/MEGACO

functioning for vendor-specificcompatibility. Refer to the product'sUser's Manual.

Range: Integer > 0

Refer to the product's User'sManual or the enumeratormgTMGCPProfile for possiblevalues.Mib name:acCPMiscCompatibilityProfileINI Name:

MGCPCOMPATIBILITYPROFILEProfile name: Digital MegacoProfile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Descript ion

Profilingbinary ASN

Integer0-2147483647

Instant 1 Used to profile the binary ASN.1encoding.

Range: Integer >0Refer to the product's User'sManual for possible values.Mib name: acMCProfileBinaryINI Name:MEGACOASN1PROFILEProfile name: Digital MegacoProfile

AASPackages

Enum:TD-51standard(0), H-248-

9standard(1), MGCP-Packet-Cable(2), SIP-

MSCML(3)

Offline 0 Selects the profile for theAdvanced Audio Syntaxspecification.

0 = TD-51 standard1 = H.248.9 standard2 = MGCP Packet Cable3 = SIP MSCMLMib name:acMCProfileAASPackagesINI Name:AASPACKAGESPROFILEProfile name: Digital MegacoProfile

TDM HairPinning Mode

Enum:loopback(0), pstn(1)

Offline 0 determinewhich Hair-pinning modeis to be used:

mode 0 - will create TDM to TDMconnection through IP softwareLoopback

mode 1 - will create ?pure? hair-pinning i.e. TDM to TDMconnection through PSTN .Mib name:acMCProfileTdmHairPinningModeINI Name:MEGACOTDMHAIRPINNINGMODE

Profile name: Digital MegacoProfile

EncodingMethod

Enum:textEncoding(0)

Offline 0 Sets the MEGACO coding method.

0 = Text modeMib name:acMCMiscEncodingMethodINI Name: MEGACOENCODINGProfile name: Digital MegacoProfile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Descript ion

Context IDOffset

Integer0-20000

Instant 0 Offset for the context ID generatedby the gateway.e.g., offset = 100 causes the first

context to be 101.

Range = 0 to 20000Mib name:acMCMiscContextIDOffsetINI Name:MEGACOCONTEXTIDOFFSETProfile name: Digital MegacoProfile

Trunk IDOffset

Integer0-2147483647

Offline 0 Sets the offset to the trunknumbering.e.g., Offset = 2 causes the first

trunk number to be 2.

Note: This parameter was replacedby the parameter 'EP_NUM'.

Range: 0 to 4294967295Mib name:acCPMiscTrunkIDOffsetINI Name:MEGACOTRUNKIDOFFSETProfile name: Digital MegacoProfile

DisconnectBehaviour Enum:NoActionOnDisconnect(1),

DisableTrunksOnDisconnect(2),

ResetBoardOnDisconnect(3)

Offline 1 Determines PBX behavior uponlosing connectivity with H.248 Callagent or TPNCP.1 = No Action - keep routing traffic2 = Disable Trunks - stop routingtrafic BUT RTP remains active3 = Reset Board - Stop allMib name:acMCMiscDisconnectBehaviorINI Name:DISCONNECTBEHAVIORProfile name: Digital MegacoProfile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Descript ion

Enable SCTPas Control

Enum:disable(0), enable(1)

Offline 1 Sets the location of the StreamControl Transmission Protocol(SCTP). If this parameter is set

and the machine is functioning inmultiple IPs mode, the SCTP islocated on the control network. Ifnot, the SCTP is located on theOAM network.

0 = Default1 = EnableMib name:acMultipleIPEnableSCTPasControlINI Name:ENABLESCTPASCONTROLProfile name: Digital MegacoProfile

SDP Profile Integer0-2147483647

Instant 0 Controls MEGACO functioning forSDP negotiation. The parameter isbitwise.Every new RFC support should beturned on or off with thisparameter.Each bit function is described inthe control protocol chapter.Mib name: acMCMiscSDPProfileINI Name: CPSDPPROFILEProfile name: Digital Megaco

Profile

2.5.2 Tab: Naming Convention

Frame: Megaco Parameters Provisioning, Tab: Naming Convention

ParameterName


DefaultValue

Description

Pattern Phys StringUp to 30 chars.

Offline Defines the name pattern of a physicaltermination.

For Example: 'tgw/t*/c*'. The '*' sign standsfor the actual numbers of the trunk andbchannel.

Range: String [30]Mib name: acMCNamePatternPhysINI Name: PHYSTERMNAMEPATTERNProfile name: Digital Megaco Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

PatternLogical RTP


Offline Defines the name pattern of an RTPtermination.

For example: 'gw/rtp/*'. The '*' sign standsfor the actual number of the RTPtermination.

Range: String [30]Mib name: acMCNamePatternLogicalRTPINI Name: LOGICALRTPTERMPATTERNProfile name: Digital Megaco Profile

Name PatternConf


Offline Defines the name pattern of a conferencetermination.

Applicable to IPM-1610 and TP-6310 only.

Range: String[32]Mib name: acMCNamePatternConfINI Name: CONFERENCETERMPATTERNProfile name: Digital Megaco Profile

PatternBCTN


Offline Defines the name pattern of a BCTtermination.

Applicable to IPM-1610 and TP-6310 only. Range: String[32]Mib name: acMCNamePatternBCTN

INI Name: BCTTERMPATTERNProfile name: Digital Megaco Profile

Pattern Audio StringUp to 32 chars.

Offline Defines the name pattern of an audiotermination.

Applicable to IPM-1610 and TP-6310 only. Range: String[32]Mib name: acMCNamePatternAudioINI Name: AUDIOTERMPATTERNProfile name: Digital Megaco Profile

Trunk Test String

Up to 32 chars.

Offline Defines the name pattern of a trunk test

termination.

Applicable to IPM-1610 and TP-6310 only. Range: String[32]Mib name: acMCNamePatternTrunkTestINI Name: TRUNKTESTTERMPATTERNProfile name: Digital Megaco Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Ephemeral IDOffset

Integer0-2147483647

Instant 0 Offset for the ephemeral termination IDs inthe gateway.e.g., offset = 100 causes the first ephemeral

termination ID to be 101.Note: This parameter was replaced by theparameter 'RTP_Num'.

Range = 0 to 4294967295Mib name:acMCNameNumberEphemeralIDOffsetINI Name:MEGACOTERMINATIONIDOFFSETProfile name: Digital Megaco Profile

MEGACOVersion

CurrentVersion

Integer1-3

Read-Only 1 The Megaco version currently being used.Mib name: acMegacoStatusCurrentVersionProfile name: Not Profiled

2.5.3 Tab: Physical Endpoint Offsetting

Frame: Megaco Parameters Provisioning, Tab: Physical Endpoint Offsetting

ParameterName


DefaultValue

Description

Index Integer0-4

Read-Only 0 Index for table use.Mib name:acMCNameNumberPhysicalEndpointIndexProfile name: Digital Physical EndpointMegaco Profile

EndpointStart

Integer-1-65535

Offline 0 Defines the starting number for each namelevel (level 0 is the left one when looking atthe parameter defining Phys Term NamePattern). Thus, to start trunk numberingfrom 1, set EP_NUM_0 to 1.

Range: Any positive numberMib name:acMCNameNumberPhysicalEndpointStartINI Name: EP_NUMProfile name: Digital Physical EndpointMegaco Profile

Endpoint Min Integer0-255

Offline 0 Defines the minimum number for eachname level (level 0 is the left one, i.e., thetrunk number).Mib name:acMCNameNumberPhysicalEndpointMinINI Name: EP_MINProfile name: Digital Physical Endpoint

Megaco Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Endpoint Max Integer0-65535

Offline 0 Defines the maximum number for eachname level (level 0 is the left one, i.e., thetrunk number).

Mib name:acMCNameNumberPhysicalEndpointMaxINI Name: EP_MAXProfile name: Digital Physical EndpointMegaco Profile

2.5.4 Tab: RTP Endpoint Offsetting

Frame: Megaco Parameters Provisioning, Tab: RTP Endpoint Offsetting

ParameterName Type ProvisioningType DefaultValue Description

Index Integer0-1

Read-Only 0 Index for table use.Mib name:acMCNameNumberStreamEndpointIndexProfile name: Digital Stream EndpointMegaco Profile

RTP Start Integer-1-65535

Instant 0 Defines the starting number for each name'sRTP termination levelMib name:acMCNameNumberStreamEndpointRTPStartINI Name: RTP_NUM

Profile name: Digital Stream EndpointMegaco Profile

2.5.5 Tab: Call Agent

Frame: Megaco Parameters Provis ioning, Tab: Call Agent

ParameterName


DefaultValue

Description

Call AgentDomain


Offline Defines a domain name to be used toconnect with the Call Agent. The parametertakes precedence over the Call Agent IPand the provisioned Call Agent parameters. Range = String[63]Deprecated in MEGACO.Mib name: acCPNamingCallAgentDomainINI Name: CALLAGENTDOMAINNAMEProfile name: Digital Megaco Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

CheckLegality Of

MGC


Instant 1 This parameter specifies if MEGACOrejects commands from an MGC not in theprovisioned list.

0 = Don't reject unknown MGCs1 = Reject unknown MGCMib name:acMCCommunicationCheckLegalityOfMGCINI Name:MEGACOCHECKLEGALITYOFMGCProfile name: Digital Megaco Profile

2.5.6 Tab: Communication Info

Frame: Megaco Parameters Provisioning, Tab: Communication Info

ParameterName

Type Provisioning Type

DefaultValue

Description

TransactionID

TransactionID Range

Integer0-

2147483647

Instant 1.00E+09 Defines the range for the transaction ID.

Default = 999997999Mib name: acCPTransactionIDRangeINI Name: TRANSACTIONIDRANGE

Profile name: Digital Megaco Profile

TransactionID Base

Integer0-

2147483647

Instant 2000 Defines the minimum number for the transactionID.

Default = 2000Mib name: acCPTransactionIDBaseINI Name: TRANSACTIONIDBASEProfile name: Digital Megaco Profile

TransactionRandomize ID


Offline 1 Defines if the transactions produced by the boardstart with a fixed or random number.

1 = Randomize OnRefer also to the parameters defining TransactionId Range and Transaction Id Base.Mib name: acCPTransactionRandomizeIDINI Name: RANDOMIZETRANSACTIONIDProfile name: Digital Megaco Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Communication LayerTimeout

Integer0-999

Instant 30 Assumed delay of the communication layer. It isused in retransmission. This parameter definesthe maximal time to wait for a response before

declaring a disconnection (in seconds).Mib name:acCPTransactionCommunicationLayerTimeoutINI Name:MGCPCOMMUNICATIONLAYERTIMEOUTProfile name: Digital Megaco Profile

Transport

Retransmission TimeOut

Integer-

2147483647-

2147483647

Instant -214748364

7

Controls protocols retransmission timeout. Setsthe initial time (in msec) for the firstretransmission. The retransmission intervalsthereafter increase exponentially.

Mib name: acCPTransportRetransmitionTimeOutINI Name: MGCPRETRANSMISSIONTIMEOUTProfile name: Digital Megaco Profile

Control DiffServ

Integer0-63

Offline 0 Defines the value of the field 'DiffServ' in the IPheader for control traffic.

Range: 0 to 63Mib name: acCPTransportControlDiffServINI Name: CONTROLDIFFSERVProfile name: Digital Megaco Profile

Hang TermTimeout

Integer0-65535

Instant 0 Default timeout (in seconds) for sending HangingTermination event, when a request for Hanging

Termination is sent without parameters.

Range - 0 -65535Mib name:acMCCommunicationTimerHangTermTimeoutINI Name: MEGACOHANGTERMTIMEOUTProfile name: Digital Megaco Profile

Restart MaxWaiting Delay

Integer0-600000

Instant 2500 Defines the Maximum Waiting Delay (inmilliseconds) before restart service change whenthe Media Gateway is powered on.Mib name:acMCCommunicationTimerRestartMaxWaitingDelayINI Name: RESTARTMAXIMUMWAITINGDELAYProfile name: Digital Megaco Profile

Target MgResponse

Time

Integer100-1000

Instant 200 The response time is defined as the time from thearrival of a call set-up request until the response(in msec).

Range = 100-1000 in resolutions of 50 (i.e. 100,150, 200, 250...)Mib name:acMCCommunicationTimerTargetMgResponseTimeINI Name: TARGETMG_RESPONSETIME

Profile name: Digital Megaco Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

MGProvisionalResponse

Integer0-20000

Instant 0 Defines the provisional response timer for themedia gateway (in msec).

Range: 0 to 20000Mib name:acMCCommunicationTimerMGProvisionalResponseINI Name: MGPROVISIONALRESPONSETIMEProfile name: Digital Megaco Profile

MGCProvisionalResponse

Integer0-20000

Instant 0 Defines the provisional response timer for theMGC (in msec).

Range: 0 to 20000Mib name:acMCCommunicationTimerMGCProvisionalResp

onseINI Name: MGCPROVISIONALRESPONSETIMEProfile name: Digital Megaco Profile

MG ExecutionTime

Integer0-2000

Instant 0 Defines the estimated execution time of themedia gateway (in msec).

Range: 0 to 2000Mib name:acMCCommunicationTimerMGExecutionTimeINI Name: MGEXECUTIONTIMEProfile name: Digital Megaco Profile

MGC

ExecutionTime

Integer

0-2000

Instant 0 Defines the estimated execution time of the MGC

(in msec).

Range: 0 to 2000Mib name:acMCCommunicationTimerMGCExecutionTimeINI Name: MGCEXECUTIONTIMEProfile name: Digital Megaco Profile

Keep Alive

Keep AliveEnabled

Integer-

2147483647-

2147483647

Instant 0 Enables a proprietary keep-alive mechanism, inwhich a serviceChange is send with UNDEFINEDas the termination ID and restart method.0 = disable>0 = enableMib name: acCPKeepAliveEnabledINI Name: KEEPALIVEENABLEDProfile name: Digital Megaco Profile

Keep AliveInterval

Integer1-300

Instant 12 This parameter is used to define the interval inseconds of a KeepAlive message.Mib name: acCPKeepAliveIntervalINI Name: KEEPALIVEINTERVALProfile name: Digital Megaco Profile

7/23/2019 LTRT-32105 Mediant 3000




2.5.7 Tab: Media Settings

Frame: Megaco Parameters Provis ion ing, Tab: Media Settings

ParameterName


DefaultValue

Description

Dial ToneDuration

Integer-2147483647-2147483647

Instant 16 Defines the timeout (in seconds) for thedial tone signal.

Range: 1 to 65535Mib name: acCPMiscDialToneDurationINI Name: DIALTONEDURATIONProfile name: Digital Megaco Profile

SDPProfile;Perform

SDP Negotiation

according toRFC3407spec;Support

V.152(VBD);Perform

SDP Negotiationaccording to

RFC3264spec;Perform

SDP Negotiationonly according to

received SDP.Ignore default

configure;RepliedSDP will containalso T, S and O

lines;Hard CodedConfigure PTime

Value forTransparentCoder. TheValue is 10

IntegerBitmask Bitmap-

0x003F

Instant 0 Controls MGCP/MEGACO functioning forSDP negotiation. The parameter is bitwise.Every new RFC support should be turned

on or off with this parameter.Each bit function is described in the controlprotocol chapter.Mib name: acCPMiscSDPProfileINI Name: CPSDPPROFILEProfile name: Digital Megaco Profile

RTCP Interval Integer-2147483647-2147483647

Instant 0 Defines the time interval between theadjacent RTCP reports (in msec).

Range: 0 to 65535Mib name: acCPMediaRTCPIntervalINI Name: RTCPINTERVALProfile name: Digital Megaco Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Default Coder Enum:Non-Initialized(0),G711Mulaw(1),

G711Alaw-64(2),G726-16(3),G726-24(4),G726-32(5),G726-40(6),G727-16(7),

G727-24-16(8),G727-24(9),

G727-32-16(10),G727-32-24(11),

G727-32(12),G727-40-16(13),G727-40-24(14),G727-40-32(15),G723High-(16),G723Low(17),

G729(18),G728(19),GSM(20),

Transparent(21),NetCoder-4-

8(22), NetCoder-5-6(23),

NetCoder-6-4(24), NetCoder-

7-2(25),NetCoder-8(26),


9-6(28),EVRC0(29),

EVRC-TFO(30),EVRC-TTY(31),QCELP-8(32),

QCELP-8-TFO(33),

QCELP-13(34),QCELP-13-

TFO(35),G729E(36), AMR-4-75(37), AMR-5-15(38), AMR-5-9(39), AMR-6-7(40), AMR-7-4(41), AMR-7-

95(42), AMR-10-2(43), AMR-12-

2(44), GSM-EFR(45),

iLBC13(46),iLBC15(47),

BV16(48),EVRC(49),Telepone-Event-RFC2833(50),Redundency-

RTP-RFC2198(51),

MODEM-Relay(52),

-

Instant 2 This parameter can be used to set adefault coder for channel opening. For thelegal coder names, refer to the product's

User Manual.

Default = cpDPT_G711Mulaw_CoderMib name: acCPMediaDefaultCoderINI Name: MGCPDEFAULTCODERProfile name: Digital Megaco Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Record Coder Enum:G711Mulaw(1),G711Alaw-64(2)

Instant 1 Determines the coder used for recording toa file.Mib name: acCPMediaRecordCoder

INI Name: CPRECORDCODERProfile name: Digital Megaco Profile

Play Coder Enum:G711Mulaw(1),G711Alaw-64(2)

Instant 1 Determines the coder type to be usedwhen playing a file of type .rawMib name: acCPMediaPlayCoderINI Name: CPPLAYCODERProfile name: Digital Megaco Profile

PacketizationPeriod

Integer5-120

Instant 20 Defines the default packetization period(Frame Size).

Default = 20 msec (for G.723 30)

Range: 5 to 80Mib name: acCPMediaPacketizationPeriodINI Name:DEFAULTPACKETIZATIONPERIODProfile name: Digital Megaco Profile

Session Owner StringUp to 31 chars.

Instant Defines the owner/creator of the sessionRange = String[31]Mib name: acCPNamingSessionOwnerINI Name: CPSDPSESSIONOWNERProfile name: Digital Megaco Profile

2.5.8 Tab: Digit Settings

Frame: Megaco Parameters Provisioning, Tab: Digit Settings

ParameterName


DefaultValue

Description

Use End OfDTMF

Integer-2147483647-2147483647

Instant 1 Defines if the detection of DTMF events isnotified at the end of DTMF or at the start ofDTMF.

0 = at start of DTMF1 = at the end of DTMFMib name:acCPDigitCollectUseEndOfDTMFINI Name: MGCPDTMFDETECTIONPOINTProfile name: Digital Megaco Profile

DTMF Length(msec)

Integer-2147483647-2147483647

Instant 100 Defines the time to play DTMF (in msec).

Range: 0 to 65535Mib name: acCPDigitCollectDTMFLengthINI Name: DTMFDIGITLENGTHProfile name: Digital Megaco Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

DTMF InterInterval(msec)

Integer0-65535

Instant 100 Defines the time between DTMFs played (inmsec).

Range: 0 to 65535Mib name:acCPDigitCollectDTMFInterIntervalINI Name: DTMFINTERDIGITINTERVALProfile name: Digital Megaco Profile

Map TimeOutTimer (msec)

Integer-1-65535

Instant -1 Defines the timeout value (T symbol) in adigit map, in increments of 10. ForMEGACO, it's the start timer. For theothers, it's the end timer.

When the value is -1, it means thehardcoded value (16000).

Mib name:acCPDigitCollectMapTimeOutTimerINI Name: DIGITMAPTIMEOUTTIMERProfile name: Digital Megaco Profile

Map ShortTimer (msec)

Integer-1-65535

Instant 3000 Defines the short timer (S Symbol) value inmillisecond, in a digit map.This timer istypically activated when the repetitionsymbol "." exists.

When the value is -1, it means thehardcoded value (3000).Mib name: acCPDigitCollectMapShortTimer

INI Name: CPDIGITMAPSHORTTIMERProfile name: Digital Megaco Profile

Map LongTimer (msec)

Integer-1-65535

Instant 16000 Defines the inter-digit long timer (L Symbol)value in millisecond, in a digit map.Thistimer is typically activated betweencollected digit when the end of the pattern isnot reached yet.

When the value is -1, it means thehardcoded value (16000).Mib name: acCPDigitCollectMapLongTimer INI Name: CPDIGITMAPLONGTIMERProfile name: Digital Megaco Profile

Digit MapName


Offline Name of the provisioned digit map.

Range: String[30]Mib name: acCPDigitMapDefaultNameINI Name: DIGITMAPNAMEProfile name: Digital Megaco Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Digit MapPatterns


Offline The digit map patterns separated by avertical bar (|), as defined in the MEGACORFC.

Range = String[500]Mib name: acCPDigitMapPatternsINI Name: DIGITMAPPINGProfile name: Digital Megaco Profile

Digit MapDialed String

Prefix


Instant Defines a prefix to add to the dialed string. Range = String[8]Mib name: acCPDigitMapDialedStringPrefixINI Name: DIALEDSTRINGPREFIXProfile name: Digital Megaco Profile

2.6 Frame: MGCP Parameters Provisioning

2.6.1 Tab: MGC Info

Frame: MGCP Parameters Provisioning, Tab: MGC Info

ParameterName


DefaultValue

Description

Call AgentIP IP Address Offline 20 The Call Agent IP address, in dottednotation, to be used for the initial Restart inProgress (RSIP) message. Set to 0.0.0.0to avoid sending RSIP. This parameteroverrides the BootP server's Call Agent IPaddress, if provided.Range: Legal IP addressMib name: acMGCallAgentIPINI Name: CALLAGENTIPProfile name: MGCP Profile

Board Name StringUp to 20 chars.

Read-Only The name fo the boardMib name: acSysIdNameProfile name: Not Profiled

Call AgentPort

Integer0-65534

Offline 0 Defines the Call Agent port number.Defaults to the MGCP default port numberof 2427.

Range: 0 to 65534Mib name: acMGCallAgentPortINI Name: CALLAGENTPORTProfile name: MGCP Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Call AgentDomain


Offline Defines a domain name to be used toconnect with the Call Agent. Theparameter takes precedence over the Call

Agent IP and the provisioned Call Agentparameters.

Range = String[63]Deprecated in MEGACO.Mib name: acCPNamingCallAgentDomainINI Name: CALLAGENTDOMAINNAMEProfile name: MGCP Profile

RedundantIP

IP Address Offline 20 Defines the redundant Call Agent IPaddress to be used for the initial Restart inProgress message (RSIP). Set to 0.0.0.0to avoid sending RSIP.

Range = IP address in dotted formatnotationMib name: acMGCallAgentRedundantIPINI Name: REDUNDANTAGENTIPProfile name: MGCP Profile

RedundantPort

Integer0-65534

Offline 0 Defines the redundant Call Agent portnumber. Defaults to the MGCP default portnumber of 2427.Mib name: acMGCallAgentRedundantPortINI Name: REDUNDANTAGENTPORTProfile name: MGCP Profile

Redundant

DomainName

String

Up to 64 chars.

Instant Defines the redundant MGCP Call Agent

domain name.

Range = String[63]Default = ' ' (empty string)Mib name:acMGCallAgentRedundantDomainNameINI Name:REDUNDANTCALLAGENTDOMAINNAMEProfile name: MGCP Profile

LocalGateway

Port

Integer-2147483647-2147483647

Offline -2147483647

Users can use this parameter to force themedia gateway to listen to another UDPport instead of to the original 2427, as

defined in RFC 2705.

Range = 0 to 65535Mib name:acMGCommunicationGateWayPortINI Name: GATEWAYMGCPPORTProfile name: MGCP Profile

7/23/2019 LTRT-32105 Mediant 3000




2.6.2 Tab: MGCs List

Frame: MGCP Parameters Prov isioning, Tab: MGCs List

ParameterName


DefaultValue

Description

Index Integer0-9

Read-Only 0 Megaco Call Agent IdMib name: acProvisionedCallAgentIndexProfile name: Digital Call Agents List MGCPProfile

Ip IP Address Offline 20 Use this parameter to define a list of up to10 legal IP addresses separated by ',' or ';'for the ServiceChange command. Thegateway starts connecting with the first andin case of failure, attempts the others.Deprecated in MEGACO.

Mib name: acProvisionedCallAgentIpINI Name: PROVISIONEDCALLAGENTSProfile name: Digital Call Agents List MGCPProfile

Port Integer0-65535

Offline 0 Use this parameter to define a list of up to10 Call Agent UDP ports separated by , or ;for each Call Agent defined by theparameter used to specify the Allowed CallAgent Address.Deprecated in MEGACO.Mib name: acProvisionedCallAgentPortINI Name:

PROVISIONEDCALLAGENTSPORTSProfile name: Digital Call Agents List MGCPProfile

2.6.3 Tab: Call Managers Group

Frame: MGCP Parameters Provis ioning, Tab: Call Managers Group

ParameterName


DefaultValue

Descript ion

Index Integer1-10 Read-Only 1 Call Manager Groups index.Mib name: acCallManagerGroupsIndexINI Name: CPCALLMANAGERGROUPS_INDEXProfile name: Digital Control Protocol Call ManagersProfile

RowStatus

Enum: NA 1 Call Manager Groups table row-status.Mib name: acCallManagerGroupsRowStatusINI Name:CPCALLMANAGERGROUPS_ROWSTATUSProfile name: Digital Control Protocol Call ManagersProfile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Descript ion

List StringUp to 63chars.

Offline List the trunks in the group. Comma and range can beusedMib name: acCallManagerGroupsList

INI Name:CPCALLMANAGERGROUPS_GROUPMEMBERSLISTProfile name: Digital Control Protocol Call ManagersProfile

MGC Type Enum:ip4(0),dns(1)

Offline 0 0- IP4 CA, 1- DNS (MGCPCallAgentDomainName)Mib name: acCallManagerGroupsMGCTypeINI Name: CPCALLMANAGERGROUPS_MGCTYPEProfile name: Digital Control Protocol Call ManagersProfile

PrimaryMGC Indx

Integer0-10

Offline 0 Index of primary MGC in the call agents list. The value 0means there is no IP.

Mib name: acCallManagerGroupsPrimaryMGCIndxINI Name:CPCALLMANAGERGROUPS_PRIMARYMGCINDXProfile name: Digital Control Protocol Call ManagersProfile

SecondaryMGC Indx

Integer0-10

Offline 0 Index of secondary MGC in the call agents list. If none -set to 10Mib name: acCallManagerGroupsSecondaryMGCIndxINI Name:CPCALLMANAGERGROUPS_SECONDARYMGCINDXProfile name: Digital Control Protocol Call ManagersProfile

2.6.4 Tab: Naming Convention

Frame: MGCP Parameters Provis ioning, Tab: Naming Convention

ParameterName


DefaultValue

Description

Gateway StringUp to 63 chars.

Offline Defines the media gateway's identificationname.

MGCP: Gateway's identification nametowards the MGCP Call Agent. If undefined,the gateway name holds the IP address ofthe device.Range: String[63]Mib name: acCPNamingGateWayINI Name: GATEWAYNAMEProfile name: Digital Control Protocol Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Endpoint StringUp to 63 chars.

Offline Defines the endpoint naming pattern for agateway. The ?*? signs will be replacedwith an actual endpoint number or with a

wild-card sign. The string will contain up to63 characters.Default value will be ?ACgw*?.

Mib name: acMGNamePatternEndpointINI Name:MGCPENDPOINTNAMINGPATTERNProfile name: Digital Control Protocol Profile

Trunk StringUp to 63 chars.

Offline Defines the trunk and B-channel namingpattern used by the gateway. The ?*? signswill be replaced with a trunk or B-channelnumber or with a wild-card sign. The string

will contain up to 63 characters.

Default value will be ?ds*/tr*?.

Mib name: acMGNamePatternTrunkINI Name:MGCPTRUNKNAMINGPATTERNProfile name: Digital Control Protocol Profile

2.6.5 Tab: Communication Info

Frame: MGCP Parameters Provisioning, Tab: Communication Info

ParameterName


DefaultValue

Description

Transaction ID

Transaction IDRange

Integer0-

2147483647

Instant 1.00E+09 Defines the range for the transaction ID.

Default = 999997999Mib name: acCPTransactionIDRangeINI Name: TRANSACTIONIDRANGEProfile name: MGCP Profile

Transaction IDBase

Integer0-

2147483647

Instant 2000 Defines the minimum number for thetransaction ID.

Default = 2000Mib name: acCPTransactionIDBaseINI Name: TRANSACTIONIDBASEProfile name: MGCP Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

TransactionRandomize ID


Offline 1 Defines if the transactions produced by theboard start with a fixed or random number.

1 = Randomize OnRefer also to the parameters definingTransaction Id Range and Transaction IdBase.Mib name: acCPTransactionRandomizeIDINI Name: RANDOMIZETRANSACTIONIDProfile name: MGCP Profile

Communication LayerTimeout

Integer0-999

Instant 30 Assumed delay of the communication layer. Itis used in retransmission. This parameterdefines the maximal time to wait for aresponse before declaring a disconnection (inseconds).

Mib name:acCPTransactionCommunicationLayerTimeoutINI Name:MGCPCOMMUNICATIONLAYERTIMEOUTProfile name: MGCP Profile

Transport

Retransmission TimeOut

Integer-

2147483647-

214748364

7

Instant -214748364

7

Controls protocols retransmission timeout.Sets the initial time (in msec) for the firstretransmission. The retransmission intervalsthereafter increase exponentially.Mib name:

acCPTransportRetransmitionTimeOutINI Name:MGCPRETRANSMISSIONTIMEOUTProfile name: MGCP Profile

Control DiffServ

Integer0-63

Offline 0 Defines the value of the field 'DiffServ' in theIP header for control traffic.

Range: 0 to 63Mib name: acCPTransportControlDiffServINI Name: CONTROLDIFFSERVProfile name: MGCP Profile

Keep Alive

Keep AliveEnabled

Integer-

2147483647-

2147483647

Instant 0 Enables a proprietary keep-alive mechanism,in which a serviceChange is send withUNDEFINED as the termination ID and restartmethod.0 = disable>0 = enableMib name: acCPKeepAliveEnabledINI Name: KEEPALIVEENABLEDProfile name: MGCP Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Keep AliveInterval

Integer1-300

Instant 12 This parameter is used to define the interval inseconds of a KeepAlive message.Mib name: acCPKeepAliveInterval

INI Name: KEEPALIVEINTERVALProfile name: MGCP Profile

2.6.6 Tab: Media Settings

Frame: MGCP Parameters Prov isioning, Tab: Media Settings

ParameterName


DefaultValue

Description

Dial ToneDuration

Integer-2147483647-2147483647

Instant 16 Defines the timeout (in seconds) for thedial tone signal.

Range: 1 to 65535Mib name: acCPMiscDialToneDurationINI Name: DIALTONEDURATIONProfile name: MGCP Profile

SDPProfile;Perform


RFC3407spec;Support

V.152(VBD);Perform


RFC3264spec;Perform

SDP Negotiationonly according to

received SDP.Ignore default

configure;RepliedSDP will containalso T, S and O

lines;Hard CodedConfigure PTime

Value forTransparentCoder. TheValue is 10

IntegerBitmask Bitmap-

0x003F

Instant 0 Controls MGCP/MEGACO functioning forSDP negotiation. The parameter is bitwise.Every new RFC support should be turnedon or off with this parameter.Each bit function is described in the controlprotocol chapter.

Mib name: acCPMiscSDPProfileINI Name: CPSDPPROFILEProfile name: MGCP Profile

RTCP Interval Integer-2147483647-2147483647

Instant 0 Defines the time interval between theadjacent RTCP reports (in msec).

Range: 0 to 65535Mib name: acCPMediaRTCPIntervalINI Name: RTCPINTERVAL

Profile name: MGCP Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Default Coder Enum:Non-Initialized(0),G711Mulaw(1),

G711Alaw-64(2),G726-16(3),G726-24(4),G726-32(5),G726-40(6),G727-16(7),

G727-24-16(8),G727-24(9),

G727-32-16(10),G727-32-24(11),

G727-32(12),G727-40-16(13),G727-40-24(14),G727-40-32(15),G723High-(16),G723Low(17),

G729(18),G728(19),GSM(20),

Transparent(21),NetCoder-4-

8(22), NetCoder-5-6(23),


7-2(25),NetCoder-8(26),


9-6(28),EVRC0(29),

EVRC-TFO(30),EVRC-TTY(31),QCELP-8(32),

QCELP-8-TFO(33),

QCELP-13(34),QCELP-13-

TFO(35),G729E(36), AMR-4-75(37), AMR-5-15(38), AMR-5-9(39), AMR-6-7(40), AMR-7-4(41), AMR-7-

95(42), AMR-10-2(43), AMR-12-

2(44), GSM-EFR(45),

iLBC13(46),iLBC15(47),

BV16(48),EVRC(49),Telepone-Event-RFC2833(50),Redundency-

RTP-RFC2198(51),

MODEM-Relay(52),

-

Instant 2 This parameter can be used to set adefault coder for channel opening. For thelegal coder names, refer to the product's

User Manual.

Default = cpDPT_G711Mulaw_CoderMib name: acCPMediaDefaultCoderINI Name: MGCPDEFAULTCODERProfile name: MGCP Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Record Coder Enum:G711Mulaw(1),G711Alaw-64(2)

Instant 1 Determines the coder used for recording toa file.Mib name: acCPMediaRecordCoder

INI Name: CPRECORDCODERProfile name: MGCP Profile

Play Coder Enum:G711Mulaw(1),G711Alaw-64(2)

Instant 1 Determines the coder type to be usedwhen playing a file of type .rawMib name: acCPMediaPlayCoderINI Name: CPPLAYCODERProfile name: MGCP Profile

PacketizationPeriod

Integer5-120

Instant 20 Defines the default packetization period(Frame Size).

Default = 20 msec (for G.723 30)

Range: 5 to 80Mib name: acCPMediaPacketizationPeriodINI Name:DEFAULTPACKETIZATIONPERIODProfile name: MGCP Profile

CompatibilityProfile

Integer0-131071

Offline 0 ControlS MGCP/MEGACO functioning forvendor-specific compatibility. Refer to theproduct's User's Manual.

Range: Integer > 0

Refer to the product's User's Manual or the

enumerator mgTMGCPProfile for possiblevalues.Mib name: acCPMiscCompatibilityProfileINI Name:MGCPCOMPATIBILITYPROFILEProfile name: MGCP Profile

Session Owner StringUp to 31 chars.

Instant Defines the owner/creator of the sessionRange = String[31]Mib name: acCPNamingSessionOwnerINI Name: CPSDPSESSIONOWNERProfile name: MGCP Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.6.7 Tab: Digit Settings

Frame: MGCP Parameters Provisioning, Tab: Digi t Settings

ParameterName


DefaultValue

Descript ion

Use EndOf DTMF

Integer-2147483647-2147483647

Instant 1 Defines if the detection of DTMF events is notifiedat the end of DTMF or at the start of DTMF.

0 = at start of DTMF1 = at the end of DTMFMib name: acCPDigitCollectUseEndOfDTMFINI Name: MGCPDTMFDETECTIONPOINTProfile name: MGCP Profile

DTMF

Length(msec)

Integer

-2147483647-2147483647

Instant 100 Defines the time to play DTMF (in msec).

Range: 0 to 65535Mib name: acCPDigitCollectDTMFLengthINI Name: DTMFDIGITLENGTHProfile name: MGCP Profile

DTMFInter

Interval(msec)

Integer0-65535

Instant 100 Defines the time between DTMFs played (in msec). Range: 0 to 65535Mib name: acCPDigitCollectDTMFInterIntervalINI Name: DTMFINTERDIGITINTERVALProfile name: MGCP Profile

MapTimeOut

Timer(msec)

Integer-1-65535

Instant -1 Defines the timeout value (T symbol) in a digit map,in increments of 10. For MEGACO, it's the starttimer. For the others, it's the end timer.

When the value is -1, it means the hardcoded value(16000).Mib name: acCPDigitCollectMapTimeOutTimerINI Name: DIGITMAPTIMEOUTTIMERProfile name: MGCP Profile

Map ShortTimer(msec)

Integer-1-65535

Instant 3000 Defines the short timer (S Symbol) value inmillisecond, in a digit map.This timer is typicallyactivated when the repetition symbol "." exists.

When the value is -1, it means the hardcoded value(3000).Mib name: acCPDigitCollectMapShortTimerINI Name: CPDIGITMAPSHORTTIMERProfile name: MGCP Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Descript ion

Map LongTimer(msec)

Integer-1-65535

Instant 16000 Defines the inter-digit long timer (L Symbol) value inmillisecond, in a digit map.This timer is typicallyactivated between collected digit when the end of

the pattern is not reached yet.

When the value is -1, it means the hardcoded value(16000).Mib name: acCPDigitCollectMapLongTimerINI Name: CPDIGITMAPLONGTIMERProfile name: MGCP Profile

Digit MapDialedStringPrefix


Instant Defines a prefix to add to the dialed string.

Range = String[8]Mib name: acCPDigitMapDialedStringPrefixINI Name: DIALEDSTRINGPREFIX

Profile name: MGCP ProfileDigitmapMismatch

Notification

Enum:DoNotSend(0),

Send(1)

Instant 0 The MGCP standard defines that if a number doesnot match the digitmap definition, a notification isnot sent.


1 = Send mismatch notification; a digital mismatchnotification is sent

or

0 = Do NOT send mismatch notification; a digitalmismatch notification is not sent. In the same way,you can enable MGCP to send notifications uponmatching digitmap.Mib name: acMGMiscDigitmapMismatchNotificationINI Name:MGCPSENDDIGITMAPMISMATCHNOTIFICATIONProfile name: MGCP Profile

SDPProfile

Integer0-2147483647

Instant 0 Controls MGCP functioning for SDP negotiation.The parameter is bitwise.Every new RFC support should be turned on or offwith this parameter.Each bit function is described in the control protocol

chapter.Mib name: acMGMiscSDPProfileINI Name: CPSDPPROFILEProfile name: MGCP Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000


Frame: MGCP Parameters Provis ioning, Tab: Misc. Settings

ParameterName


DefaultValue

Description

ConnectionID Base

Integer0-2147483647

Offline 20 Defines the lowest number for theConnection ID values assigned by themedia gateway.Mib name:acMGCommunicationConnectionIDBaseINI Name: CONNECTIONIDBASEProfile name: MGCP Profile

ConnectionID Range

Integer0-2147483647

Offline 1.00E+09 Defines the range for the Connection IDvalues assigned by the gateway.

Default = 999999999Mib name:acMGCommunicationConnectionIDRangeINI Name: CONNECTIONIDRANGEProfile name: MGCP Profile

Trunk IDOffset

Integer0-2147483647

Offline 0 Sets the offset to the trunk numbering.e.g., Offset = 2 causes the first trunknumber to be 2.

Note: This parameter was replaced by theparameter 'EP_NUM'.

Range: 0 to 4294967295Mib name: acCPMiscTrunkIDOffsetINI Name: MEGACOTRUNKIDOFFSETProfile name: MGCP Profile

PiggyBackingEnable


Offline 1 This parameter configures the option tosend piggy backed commands while RSIPSare sent. For example, if the event istriggered by the board and RSIP was notsent yet, RSIP will be sent and piggy backthe event along with it, the call manager willface endpoint restart and than the event.

Default = 1 (piggy back on)0 = commands sent by gateway will not bepiggy backed.1 = commands sent by gateway will bepiggy backed.

Mib name: acMGMiscPiggyBackingEnableINI Name: ENABLEPIGGYBACKINGProfile name: MGCP Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Use WildCard With

RSIP


Offline 1 When wildcard is used RSIPs turn in asingle message on EndPoint Namingconfiguration and Single message for each

trunk in Trunk Naming configuration. If Offand number of channels is less than 64RSIP message sent for each Endpoint. 0 =Do not use;1 = UseMib name:acMGMiscUseWildCardWithRSIPINI Name: USEWILDCARDWITHRSIPProfile name: MGCP Profile

2.7 Frame: MTP2 Prof ile

2.7.1 Tab: MTP2 Profile

Frame: MTP2 Profile , Tab: MTP2 Profile

ParameterName


DefaultValue

Description

Link Rate StringUp to 1 chars.

Online Defines the SS7 SLI Link Rate.Choose either:A = 64 kbpsD = 56 kbps

0 = 64 kbpsMib name: acSS7MTP2AttribLinkRateINI Name: SS7MTP2PARMS_LINKRATEProfile name: Not Profiled

ErrorCorrection

Method


Online Defines the SLI error correction method.B = BasicP = PCR (Preventive Cyclic Retransmission)Mib name: acSS7MTP2AttribErrorCorectionMethodINI Name:SS7MTP2PARMS_ERRORCORRECTIONMETHODProfile name: Not Profiled

Iac Cp Integer0-10

Online 5 Defines the number of aborted proving attemptsbefore sending an out-of-service to MTP-3.Mib name: acSS7MTP2AttribIacCpINI Name: SS7MTP2PARMS_IACCPProfile name: Not Profiled

SUERMThreshold

Integer0-256

Online 64 Defines the SS7 SUERM (Signal Unit Error RateMonitor) T threshold.Mib name: acSS7MTP2AttribSUERMThresholdINI Name: SS7MTP2PARMS_SUERMTProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

AERMNormal

Threshold

Integer0-20

Online 4 Normal AERM (alignment error rate monitor)threshold [0 to 20].Mib name:

acSS7MTP2AttribAERMNormalThresholdINI Name: SS7MTP2PARMS_AERMTINProfile name: Not Profiled

AERMEmerg

Threshold

Integer0-10

Online 1 Emergency AERM (alignment error rate monitor)threshold [0 to 10].Mib name:acSS7MTP2AttribAERMEmerglThresholdINI Name: SS7MTP2PARMS_AERMTIEProfile name: Not Profiled

SUERMSig Unit D

Threshold

Integer0-256

Online 256 Defines the SS7 Signal Unit error rate monitor Dthreshold.

Mib name:acSS7MTP2AttribSUERMSigUnitDThresholdINI Name: SS7MTP2PARMS_SUERMSUDProfile name: Not Profiled

OctetCounting

Integer0-256

Online 16 Defines the SS7 MTP2 Octet received while theOCTET is in counting mode (# of Octets received -N Octets - while in Octet counting mode).Mib name: acSS7MTP2AttribOctetCountingINI Name: SS7MTP2PARMS_OCTETCOUNTINGProfile name: Not Profiled

Timer T1 Integer0-100000

Online 50000 Defines the SS7 MTP2 T1 alignment ready timer (inmsecs).

Mib name: acSS7MTP2AttribTimerT1INI Name: SS7MTP2PARMS_T1Profile name: Not Profiled


Online 150000 Defines the SS7 MTP2 T2 unaligned timer (inmsecs).Mib name: acSS7MTP2AttribTimerT2INI Name: SS7MTP2PARMS_T2Profile name: Not Profiled


Online 2000 Defines the SS7 MTP2 T3 timer aligned.Mib name: acSS7MTP2AttribTimerT3INI Name: SS7MTP2PARMS_T3Profile name: Not Profiled

Timer T4Normal

Integer0-15000

Online 8200 Defines the SS7 MTP2 T4n Normal proving periodtimer.Mib name: acSS7MTP2AttribTimerT4NormalINI Name: SS7MTP2PARMS_T4NProfile name: Not Profiled

Timer T4Emerg

Integer0-5000

Online 500 Defines the SS7 MTP2 T4e Emergency provingperiod timer (msec).Mib name: acSS7MTP2AttribTimerT4EmergINI Name: SS7MTP2PARMS_T4EProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description


Online 120 Defines the SS7 MTP2 Sending SIB timer.Mib name: acSS7MTP2AttribTimerT5INI Name: SS7MTP2PARMS_T5

Profile name: Not Profiled


Online 6000 Defines the SS7 MTP2 Remote Congestion timer (inmsec).Mib name: acSS7MTP2AttribTimerT6INI Name: SS7MTP2PARMS_T6Profile name: Not Profiled


Online 2000 Defines the SS7 MTP2 excessive delay of the acktimer (in msec).Mib name: acSS7MTP2AttribTimerT7INI Name: SS7MTP2PARMS_T7Profile name: Not Profiled

LSSULength

Integer1-2

Online 1 Defines the SS7 MTP2 LSSU length as 1 or 2(bytes).Mib name: acSS7MTP2AttribLSSULengthINI Name: SS7MTP2PARMS_LSSULENGTHProfile name: Not Profiled

Pcr N2 Integer0-512

Online 200 This parameter is used to define Preventive CyclicRetransmission - the number of message signal unitoctets available for retransmission (ITU-T Q703 6.4 -Forced retransmission).Mib name: acSS7MTP2AttribPcrN2INI Name: SS7MTP2PARMS_PCRN2Profile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.8 Frame: Network Parameters Provisioning (TP-6310)

2.8.1 Tab: IP Interface Status

Frame: Network Parameters Provisioning (TP-6310), Tab: IP Interface Status

ParameterName


DefaultValue

Description

ApplicationTypes

Enum:oam(0), media(1), control(2),

oamAndMedia(3),oamAndControl(4),

mediaAndControl(5),oamAndMediaAndControl(6),

Data(11)

Read-Only 0 The type assigned to the interface.Mib name:acSysInterfaceStatusApplicationTypesProfile name: Not Profiled

Mode Enum:IPv6PrefixManual(3),

IPv6Manual(4),IPv4Manual(10)

Read-Only 0 Interface configuration mode.Mib name: acSysInterfaceStatusModeProfile name: Not Profiled

IP Address StringUp to 45 chars.

Read-Only IP Address (can be either IPv4 orIPv6) for this interface.Mib name:acSysInterfaceStatusIPAddressProfile name: Not Profiled

Prefix

Length

Integer

0-128

Read-Only 0 The number of ?1? bits in this

interface?s netmask.Mib name:acSysInterfaceStatusPrefixLengthProfile name: Not Profiled


Read-Only Default Gateway.Mib name:acSysInterfaceStatusGatewayProfile name: Not Profiled

Vlan ID Integer0-4094

Read-Only 0 VLAN ID of this interface.Mib name:acSysInterfaceStatusVlanIDProfile name: Not Profiled


Read-Only 16 character string of this interface?sname.Mib name: acSysInterfaceStatusNameProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.8.2 Tab: IP Interface Settings

Frame: Network Parameters Provisioning (TP-6310), Tab: IP Interface Settings

ParameterName


DefaultValue

Description

Row Status Enum: NA 0 ROWSTATUS Field for line.Mib name: acSysInterfaceRowStatusINI Name:INTERFACETABLE_ROWSTATUSProfile name: Not Profiled

VLAN Mode Integer0-1

Offline 0 Sets the VLAN functionality.

0 = Disable1 = Enable

Mib name: acSysVLANModeINI Name: VLANMODEProfile name: Digital Network Profile

ApplicationTypes

Enum:oam(0), media(1),

control(2),oamAndMedia(3),oamAndControl(4),mediaAndControl(5)

,oamAndMediaAndC

ontrol(6)

Offline 1 The type assigned to the interface.Mib name:acSysInterfaceApplicationTypesINI Name:INTERFACETABLE_APPLICATIONTYPESProfile name: Not Profiled

Native VLANID

Integer1-4094

Online 1 Sets the native VLAN identifier.Mib name: acSysVLANVlanNativeVlanIdINI Name: VLANNATIVEVLANIDProfile name: Digital Network Profile

InterfaceMode

Enum:IPv6PrefixManual(3)

, IPv6Manual(4),IPv4Manual(10)

Offline 0 Interface configuration mode.Mib name: acSysInterfaceModeINI Name:INTERFACETABLE_INTERFACEMODEProfile name: Not Profiled

EnableNetwork

Separation

Enum:disable(0),

enable(1)

Offline 0 Enables Network Physical Separation.Allows the user to have separate port for

each Network. Requires suitablehardware.

0 = Disabled1 = EnabledMib name:acMultipleIPEnableNetwotkSeparationINI Name:ENABLENETWORKPHYSICALSEPARATIONProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description


Online IP Address (can be either IPv4 or IPv6)for this interface.Mib name: acSysInterfaceIPAddress

INI Name:INTERFACETABLE_IPADDRESSProfile name: Not Profiled

Prefix Length Integer0-128

Offline 0 The number of ?1? bits in this interface?snetmask.Mib name: acSysInterfacePrefixLengthINI Name:INTERFACETABLE_PREFIXLENGTHProfile name: Not Profiled


Offline Default Gateway. Filled in one row only.0 in others

Mib name: acSysInterfaceGatewayINI Name:INTERFACETABLE_GATEWAYProfile name: Not Profiled

VLAN ID Integer0-4094

Offline 0 VLAN ID of this interface.Mib name: acSysInterfaceVlanIDINI Name: INTERFACETABLE_VLANIDProfile name: Not Profiled

InterfaceName


Offline a 16 character string of this interface?sname.Mib name: acSysInterfaceNameINI Name:

INTERFACETABLE_INTERFACENAMEProfile name: Not Profiled

2.8.3 Tab: QoS Settings

Frame: Network Parameters Provisioning (TP-6310), Tab: QoS Settings

ParameterName


DefaultValue

Description

Differential

Services

NetworkService

Class DiffServ

Integer0-63

Online 48 This parameter is used to set the DiffServ for Networkservice class content.

Range = 0 to 63Default = 48Mib name: acSysVLANNetworkServiceClassDiffServINI Name: NETWORKSERVICECLASSDIFFSERVProfile name: Digital Network Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

PremiumServiceClass

Media DiffServ

Integer0-63

Online 46 This parameter is used to set the DiffServ for Premiumservice class content and media traffic.

Range = 0 to 63Mib name:acSysVLANPremiumServiceClassMediaDiffServINI Name:PREMIUMSERVICECLASSMEDIADIFFSERVProfile name: Digital Network Profile

PremiumServiceClass

ControlDiff Serv

Integer0-63

Online 40 Sets the DiffServ for the Premium service class contentand control traffic.

Range: 0 to 63Mib name:acSysVLANPremiumServiceClassControlDiffServ

INI Name:PREMIUMSERVICECLASSCONTROLDIFFSERVProfile name: Digital Network Profile

GoldService

Class DiffServ

Integer0-63

Online 26 Sets the DiffServ for the Gold service class content.

Range = 0 to 63Default = 26Mib name: acSysVLANGoldServiceClassDiffServINI Name: GOLDSERVICECLASSDIFFSERVProfile name: Digital Network Profile

BronzeService

Class DiffServ

Integer0-63

Online 10 Sets the DiffServ for the Bronze service class content.

Range = 0 to 63Default = 10Mib name: acSysVLANBronzeServiceClassDiffServINI Name: BRONZESERVICECLASSDIFFSERVProfile name: Digital Network Profile

QoSSettings

NetworkServiceClass

Priority

Integer0-7

Online 7 This parameter is used to set the priority for Networkservice class content.

Range = 0 to 7Default = 7Mib name: acSysVLANNetworkServiceClassPriorityINI Name:VLANNETWORKSERVICECLASSPRIORITYProfile name: Digital Network Profile

PremiumServiceClassMediaPriority

Integer0-7

Online 6 Sets the priority for the Premium service class contentand media traffic.Range = 0 to 7Default = 6Mib name:acSysVLANPremiumServiceClassMediaPriorityINI Name:VLANPREMIUMSERVICECLASSMEDIAPRIORITY

Profile name: Digital Network Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

GoldServiceClass

Priority

Integer0-7

Online 4 Sets the priority for the Gold service class content.

Range = 0 to 7

Default = 4Mib name: acSysVLANGoldServiceClassPriorityINI Name: VLANGOLDSERVICECLASSPRIORITYProfile name: Digital Network Profile

BronzeServiceClass

Priority

Integer0-7

Online 2 Sets the priority for the Bronze service class content.

Range = 0 to 7Default = 2Mib name: acSysVLANBronzeServiceClassPriorityINI Name: VLANBRONZESERVICECLASSPRIORITYProfile name: Digital Network Profile

PremiumServiceClass

ControlPriority

Integer0-7 Online 6 Sets the priority for the Premium service class contentand control traffic.

Range = 0 to 7Default = 6Mib name:acSysVLANPremiumServiceClassControlPriorityINI Name:VLANPREMIUMSERVICECLASSCONTROLPRIORITYProfile name: Digital Network Profile

2.8.4 Tab: DNS Settings

Frame: Network Parameters Prov isioning (TP-6310), Tab: DNS Settings

ParameterName


DefaultValue

Description

DNS PrimaryServer Type

Enum:ipv4(1)

Offline 1 This parameter defines the DNS primaryserver's IP address type.Mib name: acSysIPDnsPrimaryServerTypeProfile name: Not Profiled

DNS PrimaryServer

IPAddress Offline This parameter defines the DNS primaryserver's IP address.Range = Legal IP addressMib name: acSysIPDnsPrimaryServerINI Name: DNSPRISERVERIPProfile name: Not Profiled

DNSSecondary

Server Type

Enum:ipv4(1)

Offline 1 This parameter defines the DNS secondaryserver's IP address typeMib name:acSysIPDnsSecondaryServerTypeProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

DNSSecondary

Server

IPAddress Offline This parameter defines the DNS secondaryserver's IP address.Range = Legal IP address

Mib name: acSysIPDnsSecondaryServerINI Name: DNSSECSERVERIPProfile name: Not Profiled

2.8.5 Tab: Static Routes

Frame: Network Parameters Provis ion ing (TP-6310), Tab: Static Routes

ParameterName


DefaultValue

Description

Status Enum:Active(1),

NotInService(2),NotReady(3),

CreateAndGo(4),CreateAndWait(5),

Destroy(6)

Instant 1 The row status variable,used according to row installation andremoval conventions.A row entry cannot be modified when thestatus is marked as active(1).Mib name: inetCidrRouteStatusProfile name: Not Profiled

InterfaceIndex

Integer0-256

Instant 1 The ifIndex value that identifies the localinterface through which the next hop of thisroute should be reached. A value of 0 isvalid and represents the scenario where nointerface is specified.

Mib name: inetCidrRouteIfIndexProfile name: Not Profiled

PrimaryRoutingMetric

Integer-1-100

Instant 1 The primary routing metric for this route.The semantics of this metric are determinedby the routing-protocol specified in theroute's inetCidrRouteProto value. If thismetric is not used, its value should be set to-1.Mib name: inetCidrRouteMetric1Profile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Type Enum:Other(1),Reject(2),

Local(3),Remote(4), Black

Hole(5), StaticInactive(6), Static

Active(7),Automatic(8)

Read-Only 1 The type of route. Note that local(3) refersto aroute for which the next hop is the final

destination;remote(4) refers to a route for which thenext hop isnot the final destination.

Routes that do not result in trafficforwarding orrejection should not be displayed, even iftheimplementation keeps them storedinternally.

reject(2) refers to a route that, if matched,discardsthe message as unreachable and returns anotification(e.g., ICMP error) to the message sender.This is usedin some protocols as a means of correctlyaggregatingroutes.

blackhole(5) refers to a route that, ifmatched,discards the message silently.Mib name: inetCidrRouteTypeProfile name: Not Profiled

2.8.6 Tab: SCTP

Frame: Network Parameters Provisioning (TP-6310), Tab: SCTP

ParameterName


DefaultValue

Description

Heart Beat

Interval

Integer

0-3600

Offline 30 Defines the SCTP heartbeat interval.

Range: 1 to 3600Mib name: acSysSCTPHeartBeatIntervalINI Name: SCTPHBINTERVALProfile name: Digital Network Profile

T4 SACKTimer

Integer1-5

Offline 3 Defines the SCTP T4 SACK timer interval. Range: 1 to 5Mib name: acSysSCTPT4SACKTimerINI Name: SCTPT4SACKTIMERProfile name: Digital Network Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Check SumMethod

Enum:Adler(0), Crc(1)

Offline 0 Stream Control Transmission Protocol(SCTP) uses a checksum mechanism inorder to authenticate packets on both sides

(the receiving side and the transmittingside).

Presently, two checksum mechanisms areavailable:

0 = adler32 checksum mechanism1 = crc32c checksum mechanism (improvedmechanism)Mib name: acSysSCTPCheckSumMethodINI Name: SCTPCHECKSUMMETHODProfile name: Digital Network Profile

Host Name StringUp to 255 chars.

Offline NULL When this parameter is set to any valueother than an empty string, SCTP (StreamControl Transmission Protocol) uses thevalue as the value of the FQDN (FullyQualified Domain Name) parameterattached to the INIT chunk. In this case, theFQDN parameter replaces any IP addressparameters in the INIT chunk.

This feature enables overcoming NATproblems where the original IP addressesbelonging to the endpoint supports areconverted into pseudo addresses. When

this parameter is not set (default), the INITchunk is sent without any FQDN parameter. Range = String[42]Mib name: acSysSCTPHostNameINI Name: SCTPHOSTNAMEProfile name: Digital Network Profile

SCTPAssociations

Num

Integer1-8

Offline 3 Defines the maximum number of StreamControl Transmission Protocol (SCTP)associations that can be opened.Range: 1 to 8Mib name: acSysSCTPAssociationsNum

INI Name: SCTPASSOCIATIONSNUMProfile name: Digital Network Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.8.7 Tab: Ethernet Ports

Frame: Network Parameters Provis ion ing (TP-6310), Tab: Ethernet Ports

ParameterName


DefaultValue

Description

Ethernet PortStatus

Active PortNumber

Integer0-2

Read-Only 0 Display the current active ethernet portnumber.0 - not relevant.Mib name:acSysEthernetActivePortNumberProfile name: Not Profiled

First PortDuplex Mode Enum:HalfDuplex(0),FullDuplex(1),

ForceModeValue(2),NotAvailable(3)

Read-Only 0 full-duplex or half-duplex connectionMib name:acSysEthernetFirstPortDuplexModeProfile name: Not Profiled

First PortSpeed

Enum:ForceModeValue(2),

NotAvailable(3),ac10Mbps(10),

ac100Mbps(100),ac1000Mbps(1000)

Read-Only 0Mib name: acSysEthernetFirstPortSpeedProfile name: Not Profiled

Second Port

Duplex Mode

Enum:

HalfDuplex(0),FullDuplex(1),


Read-Only 0 full-duplex or half-duplex connection

Mib name:acSysEthernetSecondPortDuplexModeProfile name: Not Profiled

Second PortSpeed

Enum:ForceModeValue(2),


ac100Mbps(100),ac1000Mbps(1000)

Read-Only 0Mib name:acSysEthernetSecondPortSpeedProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.9 Frame: Network Parameters Provisioning (TP-8410)

2.9.1 Tab: IP Interface Status

Frame: Network Parameters Provisioning (TP-8410), Tab: IP Interface Status

ParameterName


DefaultValue

Description

ApplicationTypes

Enum:oam(0), media(1), control(2),

oamAndMedia(3),oamAndControl(4),

mediaAndControl(5),oamAndMediaAndControl(6),

Data(11)

Read-Only 0 The type assigned to the interface.Mib name:acSysInterfaceStatusApplicationTypesProfile name: Not Profiled

Mode Enum:IPv6PrefixManual(3),


Read-Only 0 Interface configuration mode.Mib name: acSysInterfaceStatusModeProfile name: Not Profiled


Read-Only IP Address (can be either IPv4 orIPv6) for this interface.Mib name:acSysInterfaceStatusIPAddressProfile name: Not Profiled

Prefix

Length

Integer

0-128

Read-Only 0 The number of ?1? bits in this

interface?s netmask.Mib name:acSysInterfaceStatusPrefixLengthProfile name: Not Profiled


Read-Only Default Gateway.Mib name:acSysInterfaceStatusGatewayProfile name: Not Profiled

Vlan ID Integer0-4094

Read-Only 0 VLAN ID of this interface.Mib name:acSysInterfaceStatusVlanIDProfile name: Not Profiled


Read-Only 16 character string of this interface?sname.Mib name: acSysInterfaceStatusNameProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.9.2 Tab: IP Interface Settings

Frame: Network Parameters Provisioning (TP-8410), Tab: IP Interface Settings

ParameterName


DefaultValue

Description

Row Status Enum: NA 0 ROWSTATUS Field for line.Mib name: acSysInterfaceRowStatusINI Name:INTERFACETABLE_ROWSTATUSProfile name: Not Profiled

VLAN Mode Integer0-1

Offline 0 Sets the VLAN functionality.


Mib name: acSysVLANModeINI Name: VLANMODEProfile name: Digital Network Profile

ApplicationTypes

Enum:oam(0), media(1),

control(2),oamAndMedia(3),oamAndControl(4),

mediaAndControl(5),oamAndMediaAndCo

ntrol(6)

Offline 1 The type assigned to the interface.Mib name:acSysInterfaceApplicationTypesINI Name:INTERFACETABLE_APPLICATIONTYPESProfile name: Not Profiled

NativeVLAN ID

Integer1-4094

Online 1 Sets the native VLAN identifier.Mib name: acSysVLANVlanNativeVlanIdINI Name: VLANNATIVEVLANIDProfile name: Digital Network Profile

InterfaceMode

Enum:IPv6PrefixManual(3),


Offline 0 Interface configuration mode.Mib name: acSysInterfaceModeINI Name:INTERFACETABLE_INTERFACEMODEProfile name: Not Profiled

EnableNetwork

Separation


Offline 0 Enables Network Physical Separation.Allows the user to have separate port foreach Network. Requires suitable

hardware.

0 = Disabled1 = EnabledMib name:acMultipleIPEnableNetwotkSeparationINI Name:ENABLENETWORKPHYSICALSEPARATIONProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description


Online IP Address (can be either IPv4 or IPv6)for this interface.Mib name: acSysInterfaceIPAddress

INI Name:INTERFACETABLE_IPADDRESSProfile name: Not Profiled

PrefixLength

Integer0-128

Offline 0 The number of ?1? bits in thisinterface?s netmask.Mib name: acSysInterfacePrefixLengthINI Name:INTERFACETABLE_PREFIXLENGTHProfile name: Not Profiled


Offline Default Gateway. Filled in one row only.0 in others

Mib name: acSysInterfaceGatewayINI Name:INTERFACETABLE_GATEWAYProfile name: Not Profiled

VLAN ID Integer0-4094

Offline 0 VLAN ID of this interface.Mib name: acSysInterfaceVlanIDINI Name: INTERFACETABLE_VLANIDProfile name: Not Profiled

InterfaceName


Offline a 16 character string of this interface?sname.Mib name: acSysInterfaceNameINI Name:

INTERFACETABLE_INTERFACENAMEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.9.3 Tab: QoS Settings

Frame: Network Parameters Provisioning (TP-8410), Tab: QoS Settings

ParameterName


DefaultValue

Description

DifferentialServices

NetworkService

Class DiffServ

Integer0-63

Online 48 This parameter is used to set the DiffServ for Networkservice class content.

Range = 0 to 63Default = 48Mib name: acSysVLANNetworkServiceClassDiffServ

INI Name: NETWORKSERVICECLASSDIFFSERVProfile name: Digital Network Profile

PremiumServiceClass

Media DiffServ

Integer0-63

Online 46 This parameter is used to set the DiffServ forPremium service class content and media traffic.

Range = 0 to 63Mib name:acSysVLANPremiumServiceClassMediaDiffServINI Name:PREMIUMSERVICECLASSMEDIADIFFSERVProfile name: Digital Network Profile

Premium

ServiceClass

Control DiffServ

Integer

0-63

Online 40 Sets the DiffServ for the Premium service class

content and control traffic.

Range: 0 to 63Mib name:acSysVLANPremiumServiceClassControlDiffServINI Name:PREMIUMSERVICECLASSCONTROLDIFFSERVProfile name: Digital Network Profile

GoldService

Class DiffServ

Integer0-63

Online 26 Sets the DiffServ for the Gold service class content.

Range = 0 to 63Default = 26

Mib name: acSysVLANGoldServiceClassDiffServINI Name: GOLDSERVICECLASSDIFFSERVProfile name: Digital Network Profile

BronzeService

Class DiffServ

Integer0-63

Online 10 Sets the DiffServ for the Bronze service class content. Range = 0 to 63Default = 10Mib name: acSysVLANBronzeServiceClassDiffServINI Name: BRONZESERVICECLASSDIFFSERVProfile name: Digital Network Profile

QoSSettings

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

NetworkService

ClassPriority

Integer0-7

Online 7 This parameter is used to set the priority for Networkservice class content.

Range = 0 to 7Default = 7Mib name: acSysVLANNetworkServiceClassPriorityINI Name:VLANNETWORKSERVICECLASSPRIORITYProfile name: Digital Network Profile

PremiumServiceClassMediaPriority

Integer0-7

Online 6 Sets the priority for the Premium service class contentand media traffic.Range = 0 to 7Default = 6Mib name:

acSysVLANPremiumServiceClassMediaPriorityINI Name:VLANPREMIUMSERVICECLASSMEDIAPRIORITYProfile name: Digital Network Profile

GoldServiceClass

Priority

Integer0-7

Online 4 Sets the priority for the Gold service class content.

Range = 0 to 7Default = 4Mib name: acSysVLANGoldServiceClassPriorityINI Name: VLANGOLDSERVICECLASSPRIORITYProfile name: Digital Network Profile

Bronze

ServiceClass

Priority

Integer

0-7

Online 2 Sets the priority for the Bronze service class content.

Range = 0 to 7Default = 2Mib name: acSysVLANBronzeServiceClassPriorityINI Name: VLANBRONZESERVICECLASSPRIORITYProfile name: Digital Network Profile

PremiumServiceClass

ControlPriority

Integer0-7

Online 6 Sets the priority for the Premium service class contentand control traffic.

Range = 0 to 7Default = 6Mib name:

acSysVLANPremiumServiceClassControlPriorityINI Name:VLANPREMIUMSERVICECLASSCONTROLPRIORITYProfile name: Digital Network Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.9.4 Tab: DNS Settings

Frame: Network Parameters Prov isioning (TP-8410), Tab: DNS Settings

ParameterName


DefaultValue

Description

DNS PrimaryServer Type

Enum:ipv4(1)

Offline 1 This parameter defines the DNS primaryserver's IP address type.Mib name: acSysIPDnsPrimaryServerTypeProfile name: Not Profiled

DNS PrimaryServer

IPAddress Offline This parameter defines the DNS primaryserver's IP address.Range = Legal IP addressMib name: acSysIPDnsPrimaryServerINI Name: DNSPRISERVERIP


DNSSecondary

Server Type

Enum:ipv4(1)

Offline 1 This parameter defines the DNS secondaryserver's IP address typeMib name:acSysIPDnsSecondaryServerTypeProfile name: Not Profiled

DNSSecondary

Server

IPAddress Offline This parameter defines the DNS secondaryserver's IP address.Range = Legal IP addressMib name: acSysIPDnsSecondaryServerINI Name: DNSSECSERVERIPProfile name: Not Profiled

2.9.5 Tab: Static Routes

Frame: Network Parameters Provis ion ing (TP-8410), Tab: Static Routes

ParameterName


DefaultValue

Description


NotInService(2),NotReady(3),CreateAndGo(4),

CreateAndWait(5),Destroy(6)

Instant 1 The row status variable,used according to row installation and

removal conventions.A row entry cannot be modified when thestatus is marked as active(1).Mib name: inetCidrRouteStatusProfile name: Not Profiled

InterfaceIndex

Integer0-256

Instant 1 The ifIndex value that identifies the localinterface through which the next hop of thisroute should be reached. A value of 0 isvalid and represents the scenario where nointerface is specified.Mib name: inetCidrRouteIfIndexProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

PrimaryRoutingMetric

Integer-1-100

Instant 1 The primary routing metric for this route.The semantics of this metric are determinedby the routing-protocol specified in the

route's inetCidrRouteProto value. If thismetric is not used, its value should be set to-1.Mib name: inetCidrRouteMetric1Profile name: Not Profiled

Type Enum:Other(1),Reject(2),Local(3),

Remote(4), BlackHole(5), Static

Inactive(6), Static

Active(7),Automatic(8)

Read-Only 1 The type of route. Note that local(3) refersto aroute for which the next hop is the finaldestination;remote(4) refers to a route for which thenext hop isnot the final destination.

Routes that do not result in trafficforwarding orrejection should not be displayed, even iftheimplementation keeps them storedinternally.

reject(2) refers to a route that, if matched,discardsthe message as unreachable and returns anotification(e.g., ICMP error) to the message sender.

This is usedin some protocols as a means of correctlyaggregatingroutes.

blackhole(5) refers to a route that, ifmatched,discards the message silently.Mib name: inetCidrRouteTypeProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.9.6 Tab: SCTP

Frame: Network Parameters Provisioning (TP-8410), Tab: SCTP

ParameterName


DefaultValue

Description

Heart BeatInterval

Integer0-3600

Offline 30 Defines the SCTP heartbeat interval.

Range: 1 to 3600Mib name: acSysSCTPHeartBeatIntervalINI Name: SCTPHBINTERVALProfile name: Digital Network Profile

T4 SACKTimer

Integer1-5

Offline 3 Defines the SCTP T4 SACK timer interval. Range: 1 to 5

Mib name: acSysSCTPT4SACKTimerINI Name: SCTPT4SACKTIMERProfile name: Digital Network Profile

Check SumMethod

Enum:Adler(0), Crc(1)

Offline 0 Stream Control Transmission Protocol(SCTP) uses a checksum mechanism inorder to authenticate packets on both sides(the receiving side and the transmittingside).

Presently, two checksum mechanisms areavailable:

0 = adler32 checksum mechanism1 = crc32c checksum mechanism (improvedmechanism)Mib name: acSysSCTPCheckSumMethodINI Name: SCTPCHECKSUMMETHODProfile name: Digital Network Profile

Host Name StringUp to 255 chars.

Offline NULL When this parameter is set to any valueother than an empty string, SCTP (StreamControl Transmission Protocol) uses thevalue as the value of the FQDN (FullyQualified Domain Name) parameterattached to the INIT chunk. In this case, theFQDN parameter replaces any IP addressparameters in the INIT chunk.

This feature enables overcoming NATproblems where the original IP addressesbelonging to the endpoint supports areconverted into pseudo addresses. Whenthis parameter is not set (default), the INITchunk is sent without any FQDN parameter. Range = String[42]Mib name: acSysSCTPHostNameINI Name: SCTPHOSTNAME

Profile name: Digital Network Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

SCTPAssociations

Num

Integer1-8

Offline 3 Defines the maximum number of StreamControl Transmission Protocol (SCTP)associations that can be opened.

Range: 1 to 8Mib name: acSysSCTPAssociationsNumINI Name: SCTPASSOCIATIONSNUMProfile name: Digital Network Profile

2.9.7 Tab: Ethernet Ports

Frame: Network Parameters Provis ion ing (TP-8410), Tab: Ethernet Ports

Parameter

Name

Type Provisioning

Type

Default

Value

Description

Index Integer1-12

NA 1 The row's index.On 8410 Systems:Index 1 ? related to GBE port no.1 in theTER (Media).Index 2 ? related to GBE port no.2 in theTER (Media).Index 3 ? related to port 1A in PEM #1(Control).Index 4 ? related to port 1B in PEM #2(Control).Index 5 ? related to port 2A in PEM #1

(OAM).Index 6 ? related to port 2B in PEM #2(OAM).On MSBG only:1-12 LAN interfaces.Mib name: acSysEthernetStatusIndexProfile name: Not Profiled

Ethernet PortConfiguration

Port DuplexMode

Enum:HalfDuplex(0),FullDuplex(1),


Read-Only 0 full-duplex or half-duplex connectionMib name:acSysEthernetStatusPortDuplexMode


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

PhysicalConfiguration

Enum:HalfDuplex10BaseT(0),FullDuplex10BaseT(1),

HalfDuplex100BaseT(2),FullDuplex100BaseT(3),

AutoNegotiate(4),FullDuplex1000BaseT(7)

Offline 4 Controls the Ethernet connection modetype. Auto-negotiate falls back to Half-Duplex mode (HD) when the opposite

port is not in Auto-negotiate mode. Thespeed (10 Base-T or 100 Base-TX) inthis mode is always configured correctly. 0 = 10 Base-T half-duplex1 = 10 Base-T full-duplex2 = 100 Base-TX half-duplex3 = 100 Base-TX full-duplex4 = Auto-negotiateMib name:acSysEthernetPortPhyConfigurationINI Name:ETHERNETPHYCONFIGURATIONProfile name: Digital Network Profile

Port Speed Enum:ForceModeValue(2),


ac100Mbps(100),ac1000Mbps(1000)

Read-Only 0 port speedMib name:acSysEthernetStatusPortSpeedProfile name: Not Profiled

Active PortNumber

Enum:notActive(0), Active(1)

Read-Only 0 Status of ethernet port - active or notactive.Mib name:acSysEthernetStatusActivePortNumber


7/23/2019 LTRT-32105 Mediant 3000




2.10 Frame: NFAS Parameters Provisioning

2.10.1 Tab: NFAS Setting

Frame: NFAS Parameters Provisioning, Tab: NFAS Setting

ParameterName


DefaultValue

Description

Trunk Id Integer0-83

Read-Only 0 Trunk ID at board in which the call is takingplaceMib name: acTrunkIndexProfile name: Not Profiled

ISDN NFAS

Interface ID

Integer

0-255

Online 0 Defines the Interface ID. Works with

NS_EXPLICIT_INTERFACE_ID. Refer tothe VoPLib documentation(ISDN FlexibleBehavior).Default = (unsigned char)-1.

Range = 0 to 255Mib name: acTrunkISDNNfasInterfaceIdINI Name: ISDNNFASINTERFACEIDProfile name: Not Profiled

GroupNumber

Integer0-9

Online 0 Relevant only for T1 ISDN NFAS trunksindicates the group number of the NFASgroup. ;Valid NFAS group numbers are only1 to 9, 0 indicating that this trunk is notNFAS (in this case theISDNNFASInterfaceID and DchConfigparameters are ignored).Mib name: acTrunkISDNNfasGroupNumber INI Name: NFASGROUPNUMBERProfile name: Not Profiled

D-channelconfiguration

Enum:acDCH-CONFIG-

PRIMARY(0),acDCH-CONFIG-

BACKUP(1),acDCH-CONFIG-

NFAS(2)

Online 0 Defines D-channel configuration. Thissetting is only applicable to ISDN PRIprotocols that support NFAS and/or D-channel backup procedures.

0 = D-channel is Primary

1 = Backup2 = NFASMib name: acTrunkISDNNfasDchConfigINI Name: DCHCONFIGProfile name: Not Profiled

Trunk AdminState

Enum:Locked(0),

UnLocked(1)

Online 0 Trunk Administrative StateMib name: acTrunkAdministrativeStateProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.11 Frame: Security Provisioning

2.11.1 Tab: IPSec Proposal

Frame: Security Provisioning, Tab: IPSec Proposal

ParameterName


DefaultValue

Description

Index Integer0-4

NA 0 Index Field for line.Mib name: acSysIPsecProposalIndexINI Name: IPSECPROPOSALTABLE_INDEXProfile name: Not Profiled

IPSecEnable

Enum:No(0),Yes(1)

Offline 0 IPsec Enable flagMib name: acSysIPSecEnableINI Name: ENABLEIPSECProfile name: Not Profiled

Row Status Enum: NA 0 ROWSTATUS Field for line.Mib name: acSysIPsecProposalRowStatusINI Name:IPSECPROPOSALTABLE_ROWSTATUSProfile name: Not Profiled

Strict IKEcertificatevalidation

Enum:disabled(0),enabled(1)

Instant 0 Enables or disables certificate extension checkingfor IKE.Mib name: acSysIPSecIKECertificateExtValidateINI Name: IKECERTIFICATEEXTVALIDATEProfile name: Not Profiled

EncryptionAlgorithm

Enum:none(0),

desCbc(1),tripleDesCbc(2), aes(3)

Online 0 Selects the encryption (privacy) algorithm to use.Mib name: acSysIPsecProposalEncryptionAlgorithmINI Name:IPSECPROPOSALTABLE_ENCRYPTIONALGORITHMProfile name: Not Profiled

Authentication Algorithm

Enum:none(0),

hmacSha1-96(2),

hmacMd5-96(4)

Online 0 Selects the message authentication (integrity)algorithm to use.Mib name:acSysIPsecProposalAuthenticationAlgorithmINI Name:IPSECPROPOSALTABLE_AUTHENTICATIONALG

ORITHMProfile name: Not Profiled

DiffieHellman Group

Enum:group1-

768Bits(0),group2-

1024Bits(1)

Online 0 Selects the Diffie-Hellman group to use.Mib name: acSysIPsecProposalDiffieHellmanGroupINI Name: IPSECPROPOSALTABLE_DHGROUPProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.11.2 Tab: IPSec SA

Frame: Security Provisioning, Tab: IPSec SA

ParameterName


DefaultValue

Description

Index Integer0-20

NA 0 Index Field for line.Mib name: acSysIPsecSAIndexINI Name: IPSECSATABLE_INDEXProfile name: Not Profiled

Row Status Enum: NA 0 ROWSTATUS Field for line.Mib name: acSysIPsecSARowStatusINI Name: IPSECSATABLE_ROWSTATUSProfile name: Not Profiled

OperationalMode

Enum:Transport(0),

Tunnel(1)

Online 0 Selects the IPSec mode of operation.;0 =Transport mode (default);1 = Tunnel mode;Mib name: acSysIPsecSAIPsecModeINI Name: IPSECSATABLE_IPSECMODEProfile name: Not Profiled

RemoteTunnel

Address

StringUp to 45chars.

Online IP address of the peer router.Mib name: acSysIPsecSARemoteTunnelAddressINI Name:IPSECSATABLE_REMOTETUNNELADDRESSProfile name: Not Profiled

RemoteSubnet IPAddress


Online IP address of the remote subnetwork.Mib name:acSysIPsecSARemoteSubnetIPAddress

INI Name:IPSECSATABLE_REMOTESUBNETIPADDRESSProfile name: Not Profiled

RemoteSubnetPrefixLength

Integer0-128

Online 0 Prefix length of the Remote Subnet IP Addressparameter (in bits).Mib name:acSysIPsecSARemoteSubnetPrefixLengthINI Name:IPSECSATABLE_REMOTESUBNETPREFIXLENGTHProfile name: Not Profiled

RemoteEndpointAddress


Online IP address or DNS host name of the peer.Mib name:acSysIPsecSARemoteEndpointAddressINI Name:IPSECSATABLE_REMOTEENDPOINTADDRESSORNAMEProfile name: Not Profiled

Authentication Method

Enum:presharedKey(

0),RSASignature(

1)

Online 0 Selects the method used for peer authenticationduring IKE main mode.Mib name: acSysIPsecSAAuthenticationMethodINI Name:IPSECSATABLE_AUTHENTICATIONMETHOD


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Shared Key String Online 79 Defines the pre-shared key (in textual format).Mib name: acSysIPsecSASharedKeyINI Name: IPSECSATABLE_SHAREDKEY


Source Port Integer0-65535

Online 0 Defines the source port to which thisconfiguration applies.Mib name: acSysIPsecSASourcePortINI Name: IPSECSATABLE_SOURCEPORTProfile name: Not Profiled

Dest Port Integer0-65535

Online 0 Defines the destination port to which thisconfiguration applies.Mib name: acSysIPsecSADestPortINI Name: IPSECSATABLE_DESTPORTProfile name: Not Profiled

Protocol Integer0-255

Online 0 Defines the protocol type to which thisconfiguration applies. Standard IP protocolnumbers should be used, e.g.:;0 = Any protocol(default);17 = UDP;6 = TCP;Mib name: acSysIPsecSAProtocolINI Name: IPSECSATABLE_PROTOCOLProfile name: Not Profiled

Phase1 SaLifetime(Sec)

Integer0-2147483647

Online 0 Determines the duration (in seconds) for whichthe negotiated IKE SA (main mode) is valid. Afterthe time expires, the SA is re-negotiated.Mib name:acSysIPsecSAPhase1SaLifetimeInSec

INI Name:IPSECSATABLE_PHASE1SALIFETIMEINSECProfile name: Not Profiled

Phase2 SaLifetime(Sec)

Integer0-2147483647

Online 0 Determines the duration (in seconds) for whichthe negotiated IPSec SA (quick mode) is valid.After the time expires, the SA is re-negotiated.Mib name:acSysIPsecSAPhase2SaLifetimeInSecINI Name:IPSECSATABLE_PHASE2SALIFETIMEINSECProfile name: Not Profiled

Phase2 Sa

Lifetime(KB)

Integer

0-2147483647

Online 0 Determines the maximum volume of traffic (in

kilobytes) for which the negotiated IPSec SA(quick mode) is valid.Mib name: acSysIPsecSAPhase2SaLifetimeInKBINI Name:IPSECSATABLE_PHASE2SALIFETIMEINKBProfile name: Not Profiled

DPD mode Enum:DPDDisabled(

0),DPDPeriodic(1

),DPDOnDeman

d(2)

Online 0 Controls dead peer detection (DPD) as per RFC3706.Mib name: acSysIPsecSADPDmodeINI Name: IPSECSATABLE_DPDMODEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

InterfaceName


Online Name of the specific interface the rule applies to.None - default value when no interface waschosen.

Mib name: acSysIPsecSAInterfaceNameINI Name: IPSECSATABLE_INTERFACENAMEProfile name: Not Profiled

2.11.3 Tab: Firewall Settings

Frame: Security Provisioning, Tab: Firewall Settings

ParameterName


DefaultValue

Descript ion

Index Integer1-50

NA 1 Index Field for line. Internal parameter.Mib name: acSysAccessListIndexINI Name: ACCESSLIST_INDEXProfile name: Not Profiled

Status Enum: NA 0 ROWSTATUS field for line. Internalparameter.Mib name: acSysAccessListRowStatusProfile name: Digital Firewall Profile

Source IP StringUp to 60 chars.

Online Source IP for access ruleMib name: acSysAccessListSourceIPINI Name: ACCESSLIST_SOURCE_IP

Profile name: Digital Firewall ProfileNet Mask IPAddress Online Mask for this access rule (bitwise ANDed with

the source IP of the packet)Mib name: acSysAccessListNetMaskINI Name: ACCESSLIST_NET_MASKProfile name: Digital Firewall Profile

Start Port Integer0-65535

Online 0 Port range - startMib name: acSysAccessListStartPortINI Name: ACCESSLIST_START_PORTProfile name: Digital Firewall Profile

End Port Integer

0-65535

Online 0 Port range - end

Mib name: acSysAccessListEndPortINI Name: ACCESSLIST_END_PORTProfile name: Digital Firewall Profile

Protocol StringUp to 10 chars.

Online IP user-level protocol (TCP, UDP, ICMP,ESP, SIP, MGCP, TPNCP, ANY or numericvalue)Mib name: acSysAccessListProtocolINI Name: ACCESSLIST_PROTOCOLProfile name: Digital Firewall Profile

Packet Size Integer0-65535

Online 0 Maximum packet size (0 = unused)Mib name: acSysAccessListPacketSizeINI Name: ACCESSLIST_PACKET_SIZE

Profile name: Digital Firewall Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Descript ion

Byte Rate Integer0-2147483647

Online 0 Allowed traffic in bytes per second (0 =unused)Mib name: acSysAccessListByteRate

INI Name: ACCESSLIST_BYTE_RATEProfile name: Digital Firewall Profile

Byte Burst Integer0-2147483647

Online 0 Allowed traffic burst in bytes (0 = unused)Mib name: acSysAccessListByteBurstINI Name: ACCESSLIST_BYTE_BURSTProfile name: Digital Firewall Profile

Allow Type Enum:notSet(0),

allow(1), block(2)

Online 0 Allow or block traffic matching this ruleMib name: acSysAccessListAllowTypeINI Name: ACCESSLIST_ALLOW_TYPEProfile name: Digital Firewall Profile

Match Count Integer

0-65535

Read-Only 0 Statistics: number of matched packets

Mib name: acSysAccessListMatchCountINI Name: ACCESSLIST_MATCHCOUNTProfile name: Digital Firewall Profile

InterfaceName


Online Name of the specific interface the rule appliesto. None - default value when no interfacewas chosen.Mib name: acSysAccessListInterfaceNameINI Name: ACCESSLIST_INTERFACE_IDProfile name: Digital Firewall Profile

Use SpecificInterface


Online 0 Rule for specific interface or for the entireinterfacesMib name:acSysAccessListUseSpecificInterfaceINI Name:ACCESSLIST_USE_SPECIFIC_INTERFACEProfile name: Digital Firewall Profile

7/23/2019 LTRT-32105 Mediant 3000




2.12 Frame: SIP Advanced Configuration

2.12.1 Tab: General Features 1

Frame: SIP Advanced Configuration, Tab: General Features 1

ParameterName


Default Value Description

DisconnectOn

DetectionEnd Tones

Enum:No(0), Yes(1)

Instant 1 Release call if gateway receives busy orfast busy tone before the call isansweredMib name: miscDisconnectOnBusyToneINI Name:DISCONNECTONBUSYTONE

Profile name: Digital SIP AdvanceProfile

DisconnectOn

Detection OfSilence

Enum:No(0), Yes(1)

Offline 0 Disconnect calls on a configured silencetimeoutMib name: miscDisconnectOnSilenceINI Name:ENABLESILENCEDISCONNECTProfile name: Digital SIP AdvanceProfile

Enable BusyOut

Enum:No(0), Yes(1)

Instant 0 Take trunks out of service in case ofLAN downMib name: miscEnableBusyOutINI Name: ENABLEBUSYOUTProfile name: Digital SIP AdvanceProfile

Secure CallFrom IP

Enum:No(0), Yes(1)

Instant 0 Gateway will only accept calls from IPaddresses that are defined in the Tel toIP Routing tableMib name: miscSecureCallsFromIpINI Name: SECURECALLSFROMIPProfile name: Digital SIP AdvanceProfile

Static NAT

IP Address

String Instant 15 static NAT IP, to be supported by the

gatewayMib name: miscStaticNATIPINI Name: STATICNATIPProfile name: Digital SIP AdvanceProfile

SilenceDetectionTime Out

Integer10-28800

Offline 120 Defines the Silence period to bedetected.Mib name:miscSilenceDisconnectTimeoutINI Name:FARENDDISCONNECTSILENCEPERIODProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName



RFC 2833Payload

Type

Integer96-127

Instant 0 control the RFC 2833 Relay RTPPayload type.Mib name: miscRFC2833PayloadType

INI Name: RFC2833TXPAYLOADTYPEProfile name: Digital SIP AdvanceProfile

Is CISCOSce Mode


Instant 0 In use with G.729 - if enabled andSCE=2 then AnnexB=noMib name: miscIsCiscoSceModeINI Name: ISCISCOSCEMODEProfile name: Digital SIP AdvanceProfile

SIP 183Behaviour

Enum:Disable(0),

Enable(1)

Instant 0 If this parameter set to 1, ALERT toISDN will be sent upon 183 receive

Mib name: sipMiscSIP183BehaviourINI Name: SIP183BEHAVIOURProfile name: Digital SIP AdvanceProfile

Use ToHeader AsCalled Num


Instant 0 Use the user part of To header URL ascalled number (IP->TEL)Mib name:sipMiscUseToHeaderAsCalledNumINI Name:ISUSETOHEADERASCALLEDNUMBERProfile name: Digital SIP AdvanceProfile

Subject StringUp to 49 chars.

Instant 0 User-defined sip subjectMib name: sipMiscSubjectINI Name: SIPSUBJECTProfile name: Digital SIP AdvanceProfile

Use SIPTGRP

Enum:Disable (0),

SendOnly (1),SendAndReceive

(2),NortelHotline(3)

Instant 0 Use TGRP parameter 0 - disable[Default] , 1 - send only , 2 - send anduse if in the RequestURI when receivingINVITE, 3 - Nortel Hotline.Mib name: sipMiscUseSIPTgrpINI Name: USESIPTGRPProfile name: Digital SIP AdvanceProfile

Send 180For CallWaiting


Instant 0 Send 180 for call waiting. Used forparties that do not support 182.Mib name:sipMiscSend180ForCallWaitingINI Name:SEND180FORCALLWAITINGProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName



User AgentDisplay Info


Instant String that will be displayed in the SIPHeader 'User-Agent' or 'Server'Mib name:

sipMiscUserAgentDisplayInfoINI Name: USERAGENTDISPLAYINFOProfile name: Digital SIP AdvanceProfile

EnableGRUU


Instant 0 Obtain and use GRUU (Global RoutableUserAgentURIs)Mib name: sipMiscEnableGRUUINI Name: ENABLEGRUUProfile name: Digital SIP AdvanceProfile

DNS Query

Type

Enum:

ARecord(0),SRV(1),NAPTR(2)

Instant 0 DNS Query Type: 0-ARecord, 1-SRV,

2-NAPTR . Has effect on every DNSquery in the systemMib name: sipMiscDNSQueryTypeINI Name: DNSQUERYTYPEProfile name: Digital SIP AdvanceProfile

EnableHistory Info


Instant 0 Enable History-Info header supportMib name: sipMiscEnableHistoryInfoINI Name: ENABLEHISTORYINFOProfile name: Digital SIP AdvanceProfile

Enable TCP

ConnectionReuse

Enum:

Disable(0),Enable(1)

Instant 1 Enable reuse of TCP connection

Mib name:sipMiscEnableTCPConnectionReuseINI Name:ENABLETCPCONNECTIONREUSEProfile name: Digital SIP AdvanceProfile

ComfortNoise

Negotiation


Instant 0 is CN payload type is used and beingnegotiateMib name:sipMiscComfortNoiseNegotiationINI Name:COMFORTNOISENEGOTIATIONProfile name: Digital SIP AdvanceProfile

Multi PtimeFormat

Enum:None(0) ,

PacketCable(1)

Instant 0 Format of multiple ptime (ptime percoder) in outgoing SDPMib name: sipMiscMultiPtimeFormatINI Name: MULTIPTIMEFORMATProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName



RTP OnlyMode

Enum:Disable(0),

TransmitNReceiv

e(1),TransmitOnly(2),ReceiveOnly(3)

Instant 0 On RTP only mode their is no signallingprotocol (for media parametersnegotiation with the remote side). The

channel is open immediately. The IP forthe media is taken from the routingtable. The RTP ports are correspondingto the local side ports.RTP-Only mode Values:0 - regular call establishment1 - No Signalling. The RTP channelopen for Rx And Tx2- No Signalling. The RTP channelopen only for Tx3 - No Signalling. The RTP channelopen only for RxMib name: sipMiscRTPOnlyModeINI Name: RTPONLYMODEProfile name: Digital SIP AdvanceProfile

EnableReasonHeader


Instant 1 Enable Reason header in the outgoingmessagesMib name:sipMiscEnableReasonHeaderINI Name: ENABLEREASONHEADERProfile name: Digital SIP AdvanceProfile

3xx

Behavior

Enum:

Forward(0),Redirect(1)

Instant 0 3xx response behavior:

Forwarding behavior - use different callidentifiersRedirect behavior - use the same callidentifiers: From, To And CallIDMib name: sipMisc3xxBehaviorINI Name: 3XXBEHAVIORProfile name: Digital SIP AdvanceProfile

EnableSemi

AttendedTransfer


Instant 0 Semi-Attended Transfer when thesession to the Target is not established.false - Use REFER with Replaces.true - Use CANCEL and REFER withoutReplaces if session is not established

Mib name:sipMiscEnableSemiAttendedTransferINI Name:ENABLESEMIATTENDEDTRANSFERProfile name: Digital SIP AdvanceProfile

EnableVMURI


Instant 0 Enable History-Info header supportMib name: sipMiscEnableVMURIINI Name: ENABLEVMURIProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName



Use URL InRefer ToHeader


Instant 0 If enabled, we will use URI fromTo/From headers in Refer-To header. Ifdisabled, we will take the URI from

ContactMib name:sipMiscUseAORInReferToHeaderINI Name:USEAORINREFERTOHEADERProfile name: Digital SIP AdvanceProfile

SDPSessionOwner


Instant "AudiocodesGW"

The SDP owner stringMib name: sipMiscSDPSessionOwnerINI Name: SIPSDPSESSIONOWNERProfile name: Digital SIP AdvanceProfile

OptionsUser Part


Instant Allow to configure the OPTIONSuserpart string for all gateways.The default value should be emptystring which means that we don't usethis parameter. Another special value is"empty" which means that the we don'tpopulate the user part of the OPTIONSrequest URI.Any other value will be taken as is andused as the user part of the OPTIONSrequest URI.Mib name: sipMiscOPTIONSUserPart

INI Name: OPTIONSUSERPARTProfile name: Digital SIP AdvanceProfile

ApplicationProfile

Integer0-2000000

Offline 0 ApplicationProfile, read it later forvalidating that the board is theirs.Mib name: sipMiscApplicationProfileINI Name: APPLICATIONPROFILEProfile name: Digital SIP AdvanceProfile

T38

T38 UseRTP Port


Instant 0 T.38 packets will be received on RTPportMib name: miscT38UseRTPPortINI Name: T38USERTPPORTProfile name: Digital SIP AdvanceProfile

T38 MaxDatagram

Size

Integer122-1024

Instant 122 T.38 coder - Max Datagram SizeMib name: miscT38MaxDatagramSizeINI Name: T38MAXDATAGRAMSIZEProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName



T38 FaxMax Buffer

Size

Integer500-3000

Instant 1024 Defines the fax max buffer size in T38SDP negotiation.Mib name: miscT38FaxMaxBufferSize

INI Name: T38FAXMAXBUFFERSIZEProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000




2.12.2 Tab: General Features 2

Frame: SIP Advanced Configuration , Tab: General Features 2

ParameterName


DefaultValue

Description

T1 RTX Integer100-4000

Instant 500 SIP T1 timeout for retransmissionMib name: sipRetransmissionT1RtxINI Name: SIPT1RTXProfile name: Digital SIP AdvanceProfile

T2 RTX Integer100-10000

Instant 4000 SIP T2 timeout for retransmissionMib name: sipRetransmissionT2RtxINI Name: SIPT2RTXProfile name: Digital SIP Advance

Profile

Max RTX Integer1-30

Instant 7 Maximum number of retransmissionsMib name: sipRetransmissionSipMaxRtxINI Name: SIPMAXRTXProfile name: Digital SIP AdvanceProfile

Is RTXEnable

Enum:No(0), Yes(1)

Instant 1 is Rtx timer enabledMib name:sipRetransmissionIsRtxEnableINI Name: ISRTXENABLEProfile name: Digital SIP AdvanceProfile

Retry AfterTime

Integer0-3600

Instant 0 Retry After time for the proxy to be instate UnavailableMib name:sipRetransmissionRetryAfterTimeINI Name: RETRYAFTERTIMEProfile name: Digital SIP AdvanceProfile

TCPTimeout

Integer0-60

Instant 0 SIP TCP time out (influence timerB andTimer F)Mib name:sipRetransmissionTCPTimeout

INI Name: SIPTCPTIMEOUTProfile name: Digital SIP AdvanceProfile

Enable PTime


Instant 1 is ptime parameter needed in sdpMib name:sipRetransmissionEnablePTimeINI Name: ENABLEPTIMEProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

P AssertedUser Name


Instant "" Digit pattern used to indicate CallForward on Do Not Disturb (PBX toVoiceMail)

Mib name: sipMiscPAssertedUserNameINI Name: PASSERTEDUSERNAMEProfile name: Digital SIP AdvanceProfile

Enable PCharging

Vector


Instant 0 Generate P-Charging-Vector header[0] - disabled[1] - enabledMib name:sipMiscEnablePChargingVectorINI Name:ENABLEPCHARGINGVECTORProfile name: Digital SIP Advance

ProfileEnable P

AssociatedURI Header


Instant 0 Handles the P-Associated-URI header ina 200OK response for a REGISTERrequestMib name:sipMiscEnablePAssociatedURIHeaderINI Name:ENABLEPASSOCIATEDURIHEADERProfile name: Digital SIP AdvanceProfile

Enable RPIHeader

Enum:No(0), Yes(1)

Instant 0 Enable Remote-Party-ID headerMib name: sipMiscEnableRpiHeader

INI Name: ENABLERPIHEADERProfile name: Digital SIP AdvanceProfile

Add Ton 2RPI


Instant 1 Add Number Type and Plan to Remote-Party-ID headerMib name: sipMiscAddTon2RpiINI Name: ADDTON2RPIProfile name: Digital SIP AdvanceProfile

Is UserPhone

Enum:No(0), Yes(1)

Instant 1 Add User=Phone parameter to SIP URLMib name: sipMiscIsUserPhoneINI Name: ISUSERPHONEProfile name: Digital SIP AdvanceProfile

Prack Mode Enum:Disabled(0),

Supported(1),Required(2)

Instant 1 PRACK mechanism mode for 1XXreliable responses: 0- Disabled , 1-Supported , 2- RequiredMib name: sipMiscPrackModeINI Name: PRACKMODEProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

X ChannelHeader


Instant 0 0 (default): No special header 1:Addspecial header for trunk and B-ChannelMib name: sipMiscXChannelHeader

INI Name: XCHANNELHEADERProfile name: Digital SIP AdvanceProfile

Asserted IDMode

Enum:NoHeaderAdded(0),PAssertedIdRFC332

5(1),PPreferreddIdRFC33

25(2)

Instant 0 Select Asserted Identity header methodMib name: sipMiscAssertedIDModeINI Name: ASSERTEDIDMODEProfile name: Digital SIP AdvanceProfile

Is UserPhone In

From

Enum:Disable(0),

Enable(1)

Instant 0 Add 'User=Phone' to From headerMib name: sipMiscIsUserPhoneInFrom

INI Name: ISUSERPHONEINFROMProfile name: Digital SIP AdvanceProfile

Enable CIC Enum:No(0), Yes(1)

Instant 0 Enables CIC -> ISDN TNS IEinterworkingMib name: sipMiscEnableCICINI Name: ENABLECICProfile name: Digital SIP AdvanceProfile

ISubNumber Of

Digits

Integer0-36

Instant 0 Number of digits that will be taken fromend of phone number as SubaddressMib name: sipMiscISubNumberOfDigits

INI Name: ISUBNUMBEROFDIGITSProfile name: Digital SIP AdvanceProfile

EnablesDetection of

FAX onAnswerTone


Instant 0 Start T.38 fax procedure after faxanswer tone detection or after HDLCpreamble signal detectionMib name: miscDetFaxOnAnswerToneINI Name: DETFAXONANSWERTONEProfile name: Digital SIP AdvanceProfile

DefaultRelease

Cause

Integer1-128

Instant 1 The release cause that will be sent to IPor to Tel when gateway initiates release

by itselfMib name: miscDefaultReleaseCauseINI Name: DEFAULTRELEASECAUSEProfile name: Digital SIP AdvanceProfile

Enable FaxRerouting


Instant 0 Enable rerouting of FAX calls to FAXdestinationMib name: miscEnableFaxReroutingINI Name: ENABLEFAXREROUTINGProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

MaximumConcurrent

Calls

Integer1-4032

Instant 0 Limit the number of calls that thegateway can handle at the same timeMib name:

resourceManagementMaxActiveCallsINI Name: MAXACTIVECALLSProfile name: Digital SIP AdvanceProfile

DisconnectCalls onBroken

Connection


Instant 1 Disconnect calls on receiving RTPbroken notificationMib name:resourceManagementDisconnectOnBrokenConnectionINI Name:DISCONNECTONBROKENCONNECTION


Max CallDuration

Integer0-35791

Instant 0 Limit the call time duration (minutes); 0 =no limitMib name:resourceManagementMaxCallDurationINI Name: MAXCALLDURATIONProfile name: Digital SIP AdvanceProfile

Time Out Integer1-30000

Instant 10000 Amd Detection TimeoutMib name: aMDTimeOutINI Name: AMDTIMEOUT


Indications Enum:None(0),

AuthorizeAndAuthenticate(1),

FullReport(2),AccountingOnly(3)

Instant 0 Which Authentication, Authorization andAccounting indications to useMib name: aaaIndicationsINI Name: AAAINDICATIONSProfile name: Digital SIP AdvanceProfile

RadiusAccounting

Type

Enum:release(0),

connectAndRelease(1),

setupAndRelease(2)

Instant 0 When will Radius Acounting messagesbe sentMib name: aaaRadiusAccountingTypeINI Name: RADIUSACCOUNTINGTYPEProfile name: Digital SIP AdvanceProfile

MutualAuthenticati

on Mode

Enum:Optional(0),

Mandatory(1)

Instant 0 Mutual Authentication Mode: 0 -Optional, 1 - MandatoryMib name:sipAuthMutualAuthenticationModeINI Name:MUTUALAUTHENTICATIONMODEProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

ChallengeCaching

Mode

Enum:NoCaching(0),InviteOnly(1),

FullCaching(2)

Instant 0 0. No caching mode ? don't cache anychallenges. Every new request will besent without preliminary authorization. If

the request is challenged ? new requestwith authorization data will be sent.1. Cache for INVITE mode ? challengesissued for INVITE request and within thesession will be cached. This will preventthe mixture of REGISTER and INVITEauthorizations.2. Full cache mode ? cache anychallenges from the proxies.

Mib name:sipAuthChallengeCachingModeINI Name:SIPCHALLENGECACHINGMODEProfile name: Digital SIP AdvanceProfile

IP AlertTimeout

Integer0-3600

Instant 180 Maximal time to wait for connect from IP(seconds)Mib name: acTimersIPAlertTimeoutINI Name: IPALERTTIMEOUTProfile name: Digital SIP AdvanceProfile

PSTN AlertTimeout

Integer1-600

Instant 180 Max time (in seconds) to wait forconnect from PSTN

Mib name: acTimersPSTNAlertTimeoutINI Name: PSTNALERTTIMEOUTProfile name: Digital SIP AdvanceProfile

EnableContact

Restriction


Instant 0 Hides the user part of the URI in theContact Header0 - Disable1 - EnableMib name:sipMiscEnableContactRestrictionINI Name:ENABLECONTACTRESTRICTIONProfile name: Digital SIP AdvanceProfile

EnableDigit

Delivery ToIP


Offline 0 Enable automatic digit delivery to IP sideafter call is connectedMib name:routingEnableDigitDelivery2IPINI Name: ENABLEDIGITDELIVERY2IPProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Fax CNGMode


Instant 0 Enables sending of ReInvite ondetection of FAX CNG tone whenCNGDetectorMode=1

Mib name: miscFaxCNGModeINI Name: FAXCNGMODEProfile name: Digital SIP AdvanceProfile

AASPackages

Enum:TD-51standard(0),

H-248-9standard(1),MGCP-Packet-Cable(2), SIP-

MSCML(3)

Offline 0 Selects the profile for the AdvancedAudio Syntax specification.

0 = TD-51 standard1 = H.248.9 standard2 = MGCP Packet Cable3 = SIP MSCMLMib name: acMCProfileAASPackages

INI Name: AASPACKAGESPROFILEProfile name: Digital SIP AdvanceProfile

GracefulBusy OutTimeout

Integer0-3600

Instant 0 Graceful Busy Out Timeout in seconds.Sets the time before a busy out signalwill be sent to a trunk even if there arestill active calls on the trunk.Mib name:miscGracefulBusyOutTimeoutINI Name:GRACEFULBUSYOUTTIMEOUTProfile name: Digital SIP Advance

ProfileReliable

ConnectionPersistent

Mode


Instant 0 if set to 1 - All TCP/TLS connections willbe set as persistent and will not bereleasedMib name:miscReliableConnectionPersistentModeINI Name:RELIABLECONNECTIONPERSISTENTMODEProfile name: Digital SIP AdvanceProfile

WAN IP

Address

IPAddress Instant Sets the WAN address to be used by

VOIP signalling applications.Range = IPv4 address in dotted decimalnotationxxx.xxx.xxx.xxxDefault = 0.0.0.0Mib name: miscWANIPAddressINI Name: WANIPADDRESSProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

EnableDelayed

Offer


Instant 0 Send INVITE message with/without sdpoffer.[0] - (default) means SDP will be offered

in the INVITE message.[1] - means SDP will be offered by theother side in the first reliableresponse(1xx or 200 OK INVITE).Mib name: miscEnableDelayedOfferINI Name: ENABLEDELAYEDOFFERProfile name: Digital SIP AdvanceProfile

EnableNRT

Subscription


Instant 0 Enable subscription for Call forwardringtone Indicator serviceMib name: miscEnableNRTSubscriptionINI Name:

ENABLENRTSUBSCRIPTIONProfile name: Digital SIP AdvanceProfile

NRTSubscriptio

n RetryTime

Integer0-2000000

Instant 120 NRT service subscription retry time afterlast subscription failure (in seconds)Mib name:miscNRTSubscriptionRetryTimeINI Name:NRTSUBSCRIBERETRYTIMEProfile name: Digital SIP AdvanceProfile

Call

ForwardRing Tone

ID

Integer

1-65525

Instant 1 Ringtone type for Call forward

notificationMib name: miscCallForwardRingToneIDINI Name:CALLFORWARDRINGTONEIDProfile name: Digital SIP AdvanceProfile

Key CallPickup


Instant Keying sequence for performing callpickupMib name: miscKeyCallPickupINI Name: KEYCALLPICKUPProfile name: Digital SIP AdvanceProfile

EnableRFC 4117Transcodin

g


Offline 0 Enable transcoding call RFC4117Mib name:miscEnableRFC4117TranscodingINI Name:ENABLERFC4117TRANSCODINGProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

EnableSingle DSPTranscodin

g


Offline 0 Enable/Disable using single DSP forg711 <--> LBR coderMib name:

miscEnableSingleDSPTranscodingINI Name:ENABLESINGLEDSPTRANSCODINGProfile name: Digital SIP AdvanceProfile

EnableNetwork

ISDNTransfer


Instant 1 if set to 0 reject ISDN transfer requestMib name:miscEnableNetworkISDNTransferINI Name:ENABLENETWORKISDNTRANSFERProfile name: Digital SIP AdvanceProfile

EnableVXML


Offline 0 Enables/disables the VXML stack.

0=Disable1=EnableMib name: acCPVxmlEnableVXMLINI Name: ENABLEVXMLProfile name: Digital SIP AdvanceProfile

EnableEarly 183


Instant 0 Enable Early 183Mib name: miscEnableEarly183INI Name: ENABLEEARLY183Profile name: Digital SIP Advance

Profile

Max SIPMessageLength

Integer1-50

Instant 3 Limit the maximum length in KB for SIPmessageMib name: miscMaxSIPMessageLengthINI Name: MAXSIPMESSAGELENGTHProfile name: Digital SIP AdvanceProfile

QoSStatistics


Instant 0 Whether or not add statistics to callreleaseMib name: miscQoSStatisticsINI Name: QOSSTATISTICSProfile name: Digital SIP AdvanceProfile

Fake RetryAfter

Integer0-3600

Instant 0 0 - disabled.Any positive value - when the GWreceives 503 without Retry-Afterresponse-header,it will behave as the 503 responseincludes a Retry-After response-headerwith the period specified by thisparameterMib name: miscFakeRetryAfterINI Name: FAKERETRYAFTERProfile name: Digital SIP Advance

Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

EnableRekey After

181


Instant 0 Send Reinvite after 181 (Call Is BeingForwarded) with new generated STRTPkeys.

Mib name: sipMiscEnableRekeyAfter181INI Name: ENABLEREKEYAFTER181Profile name: Digital SIP AdvanceProfile

UseDestination

AsConnected

Number


Instant 0 Use Destination As Connected Number Mib name:sipMiscUseDestinationAsConnectedNumberINI Name:USEDESTINATIONASCONNECTEDNUMBERProfile name: Digital SIP Advance

ProfileSelectSource

Header ForCalled

Number

Enum:useRequestURIHea

der(0),useToHeader(1),

usePCalledPartyIDHeader(2)

Instant 0 Select source header for called number(IP->TEL), either from the user part ofTo header or the P-Called-Party-IDheader.0- use RequestURI header1- use To header2- use P-Called-Party-ID headerMib name:miscSelectSourceHeaderForCalledNumberINI Name:

SELECTSOURCEHEADERFORCALLEDNUMBERProfile name: Digital SIP AdvanceProfile

EmptyAuthorizatio

n Header


Instant 0 If empty Authorization header should beadded into Register requestMib name:miscEmptyAuthorizationHeaderINI Name:EMPTYAUTHORIZATIONHEADERProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.12.3 Tab: Transport Info

Frame: SIP Advanced Configuration , Tab: Transport Info

ParameterName


DefaultValue

Description

TransportType

Enum:udp(0), tcp(1),

tls(2)

Instant 0 SIP transport typeMib name: sipMiscTransportTypeINI Name: SIPTRANSPORTTYPEProfile name: Digital SIP Advance Profile

DestinationPort

Integer1-65534

Instant 5060 Default SIP destination port (usually 5060)Mib name: sipPortsDestinationPortINI Name: SIPDESTINATIONPORTProfile name: Digital SIP Advance Profile

Local SIPPort Integer1-65534 Instant 5060 Local SIP port used for signalingMib name: sipPortsLocalSipPortINI Name: LOCALSIPPORTProfile name: Digital SIP Advance Profile

TCP LocalSIP Port

Integer1-65535

Instant 5060 Local SIP port used for signalingMib name: sipPortsTCPLocalSipPortINI Name: TCPLOCALSIPPORTProfile name: Digital SIP Advance Profile

TLS LocalSIP Port

Integer1-65535

Instant 5061 Local TLS SIP port used for signalingMib name: sipPortsTLSLocalSipPortINI Name: TLSLOCALSIPPORTProfile name: Digital SIP Advance Profile

2.12.4 Tab: Tones And Progress

Frame: SIP Advanced Configuration , Tab: Tones And Progress

ParameterName


DefaultValue

Description

ReorderTone

Duration

(sec)

Integer0-255

Instant 0 Duration of reorder toneplaying before FXO releasesline

Mib name:tonesTimeForReorderToneINI Name:TIMEFORREORDERTONEProfile name: Digital SIPAdvance Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Dial ToneDuration

(sec)

Integer0-60

Instant 16 Duration of played dial toneafter the gateway seizes theline in response to ringing

Mib name:tonesTimeForDialToneINI Name:TIMEFORDIALTONEProfile name: Digital SIPAdvance Profile

Play RingBack Tone

To IP

Enum:No(0), Yes(1)

Instant 0 Enable ringback toneplaying towards IP. Refer toUser's Manual for detailsMib name:tonesPlayRBTone2IpINI Name:

PLAYRBTONE2IPProfile name: Digital SIPAdvance Profile

Play RingBack Tone

To Tel

Enum:DoNotPlay(0), PlayOnLocal(1),

PreferIp(2),PlayLocalUntilRemoteMediaArrives(

3)

Instant 2 Enable ringback toneplaying towards Tel side.Refer to User's Manual fordetailsMib name:tonesPlayRBTone2TelINI Name:PLAYRBTONE2TELProfile name: Digital SIP

Advance ProfileStutterTone

Duration

Integer0-60000

Instant 2000 Time for playingconfirmation tone beforenormal dial tone is played(msec)Mib name:tonesStutterToneDurationINI Name:STUTTERTONEDURATIONProfile name: Digital SIPAdvance Profile

Enable

Playing RBTone OnTransferSuccess

Enum:

Disable(0), Enable(1)

Instant 0 Play RB tone on transfer

successMib name:tonesPlayRBToneXferSuccessINI Name:PLAYRBTONEONXFERProfile name: Digital SIPAdvance Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

ScreeningIndicator

To IP

Enum:NotOverwrited(-1), UserProvided(0),

UserPassed(1), UserFailed(2),

NetworkProvided(3)

Instant -1 Override screening indicatorvalue in Setup messages toIP

Mib name:screeningIndicators2IpINI Name:SCREENINGIND2IPProfile name: Digital SIPAdvance Profile

ScreeningIndicatorTo ISDN

Enum:NotOverwrited(-1), UserProvided(0),

UserPassed(1), UserFailed(2),NetworkProvided(3)

Instant 0 Override screening indicatorvalue in Setup messages toISDNMib name:screeningIndicators2ISDNINI Name:

SCREENINGIND2ISDNProfile name: Digital SIPAdvance Profile

EnableComfort

Tone


Instant 0 Enable Comfort Tone forplaying a patience comforttone between Invite and 18xresponse.[0] - Disabled[1] - Enabled. Comfort Tonewill be played.Mib name:tonesEnableComfortTone

INI Name:ENABLECOMFORTTONEProfile name: Digital SIPAdvance Profile

First CallRing BackTone ID

Integer-1-1000

Instant -1 The index of the first Call RBtone in the call-progresstones fileMib name:tonesFirstCallRBTIdINI Name:FIRSTCALLRBTIDProfile name: Digital SIPAdvance Profile

Precedence Ringing

Type

Integer-1-16

Instant -1 The index of the first Call RBtone in the call-progresstones fileMib name:tonesPrecedenceRingingTypeINI Name:PRECEDENCERINGINGTYPEProfile name: Digital SIPAdvance Profile

7/23/2019 LTRT-32105 Mediant 3000




2.12.5 Tab: Digital Settings

Frame: SIP Advanced Configuration , Tab: Digital Settings

ParameterName


DefaultValue

Description

B-channelNegotiation

Enum:No(0), Yes(1),

Any(2)

Instant 0 ISDN B-Channel negotiation modeMib name: digitalGWBChannelNegotiationINI Name: BCHANNELNEGOTIATIONProfile name: Digital SIP Digital Settings Profile

SwapRedirect

And CalledNumbers

Enum:No(0), Yes(1)

Instant 0 Swap Redirect and Called numbersMib name: digitalGWSwapRedirectNumberINI Name: SWAPREDIRECTNUMBERProfile name: Digital SIP Digital Settings Profile

R2Category

Integer1-15

Instant 1 MFCR2 Calling Party's categoryMib name: digitalGWR2CategoryINI Name: R2CATEGORYProfile name: Digital SIP Digital Settings Profile

CASDetectionOf Hook

Flash


Instant 0 0 (default): Hookflash not forwarded1:HookFlash forwarded - TestingMib name: digitalGWCASSendHookFlashINI Name: CASSENDHOOKFLASHProfile name: Digital SIP Digital Settings Profile

TDM OverIP


Offline 0 Enable gateway to maintain a permanent RTPconnectionMib name: digitalGWEnableTDMOverIpINI Name: ENABLETDMOVERIP

Profile name: Digital SIP Digital Settings ProfileTDM Over

IP MinCalls For

TrunkActivation

Integer0-31

Instant 0 Minimum connected calls for trunk activationwhile in TDMOverIPMode if 0 - trunk is alwaysactiveMib name:digitalGWextTDMOverIPMinCallsForTrunkActivationINI Name:TDMOVERIPMINCALLSFORTRUNKACTIVATIONProfile name: Digital SIP Digital Settings Profile

Transparen

t Coder OnData Call

Enum:


Instant 0 In case the transfer capability of a call from

ISDN is data open with transparent coderMib name:digitalGWTransparentCoderOnDataCallINI Name:TRANSPARENTCODERONDATACALLProfile name: Digital SIP Digital Settings Profile

SupportRedirectIn

Facility


Instant 0 Search for redirect number in facility IEMib name: digitalGWSupportRedirectInFacilityINI Name: SUPPORTREDIRECTINFACILITYProfile name: Digital SIP Digital Settings Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

ConnectOn

Progress

Ind


Instant 0 FXS:generate CallerId siganls during ringingFXO:collect CallerId and use it in Setupmessage.

Mib name: digitalGWConnectOnProgressIndINI Name: CONNECTONPROGRESSINDProfile name: Digital SIP Digital Settings Profile

Enable UUITel 2 Ip


Instant 0 Enable User-User IE to pass in Setup fromISDN to IPMib name: digitalGWEnableUuiTel2IpINI Name: ENABLEUUITEL2IPProfile name: Digital SIP Digital Settings Profile

Enable UUIIp 2 Tel


Instant 0 Enable User-User IE to pass in Setup from IPto ISDNMib name: digitalGWEnableUuiIp2Tel

INI Name: ENABLEUUIIP2TELProfile name: Digital SIP Digital Settings Profile

Send ISDNTransfer

OnConnect


Instant 0 Send TBCT/ECT/RLT request only whensecond leg call is connectedMib name:digitalGWSendISDNTransferOnConnectINI Name:SENDISDNTRANSFERONCONNECTProfile name: Digital SIP Digital Settings Profile

EnableISDN

Tunneling

Tel 2 IP

Enum:Disable(0),

UsingHeader(1),

UsingBody(2)

Instant 0 Enable ISDN tunneling to pass Setup andFacility messages from ISDN to IPMib name:

digitalGWEnableISDNTunnelingTel2IpINI Name: ENABLEISDNTUNNELINGTEL2IPProfile name: Digital SIP Digital Settings Profile

EnableISDN

TunnelingIP 2 Tel

Enum:Disable(0),

UsingHeader(1),UsingBody(2)

Instant 0 Enable ISDN tunneling to pass Setup andFacility messages from IP to ISDNMib name:digitalGWEnableISDNTunnelingIp2TelINI Name: ENABLEISDNTUNNELINGIP2TELProfile name: Digital SIP Digital Settings Profile

EnableHold 2ISDN


Instant 0 Enable Hold/retrieve from and to ISDNMib name: supServicesEnableHold2ISDNINI Name: ENABLEHOLD2ISDN

Profile name: Digital SIP Digital Settings Profile

EnableQSIG

Tunneling


Instant 0 Enables QSIG Tunneling over SIPMib name: digitalGWextEnableQSIGTunnelingINI Name: ENABLEQSIGTUNNELINGProfile name: Digital SIP Digital Settings Profile

RemoveCLI WhenRestricted


Instant 0 Removes CLI from IP->TEL calls if receivedCLI is restrictedMib name:digitalGWextRemoveCLIWhenRestrictedINI Name: REMOVECLIWHENRESTRICTEDProfile name: Digital SIP Digital Settings Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

DefaultCause MapISDN to IP

Integer0-127

Instant 0 All ISDN release causes except normal, busy,no user responding, and no answer will bemapped to this cause, if set.

Mib name:digitalGWextDefaultCauseMapISDN2IPINI Name: DEFAULTCAUSEMAPISDN2IPProfile name: Digital SIP Digital Settings Profile

ISDNSubaddress Format

Enum:Ascii(0), Bcd(1),userSpecified(2)

Instant 0 ISDN SubAdress formatMib name:digitalGWextISDNSubaddressFormatINI Name: ISDNSUBADDRESSFORMATProfile name: Digital SIP Digital Settings Profile

EnableCalling

PartyCategory

Enum:Disable(0),

Enable(1)

Instant 0 Enables NI2 calling party category translationto SIP

Mib name:digitalGWEnableCallingPartyCategoryINI Name:ENABLECALLINGPARTYCATEGORYProfile name: Digital SIP Digital Settings Profile

IE To BeAdded In

Q.931Setup


Instant Additional information element to send in ISDNSetup messageMib name: iEAddIEInSetupINI Name: ADDIEINSETUPProfile name: Digital SIP Digital Settings Profile

List OfTrunk

Groups ToSend IE


Instant Configure trunk groups on which to sendadditional IE

Mib name: iESendIEOnTGINI Name: SENDIEONTGProfile name: Digital SIP Digital Settings Profile

ConnectCode


Instant Play Code string to Tel side when connectmessage recieved from IP sideMib name: vmDigitPatternConnectCodeINI Name: TELCONNECTCODEProfile name: Digital SIP Digital Settings Profile

Esc IP StringUp to 48 chars.

Instant 0.0.0.0 RTCP-XR server IP addressMib name: acGWRtcpXrEscIPINI Name: RTCPXRESCIPProfile name: Digital SIP Digital Settings Profile

ReportMode

Enum:Disable(0),EndCall(1),

EndCallPeriodic(2)

Instant 0 0:rtcpxr is not sent over SIP at all1:rtcpxr is sent over sip when call ended2:rtcpxr is sent over sip when on periodicinterval and when call ended

Mib name: acGWRtcpXrReportModeINI Name: RTCPXRREPORTMODEProfile name: Digital SIP Digital Settings Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

EnableAoC


Instant 0 Enable AoC-D and AoC-E from ISDN to SIPMib name: digitalGWextEnableAoCINI Name: ENABLEAOC

Profile name: Digital SIP Digital Settings Profile

RemoveCallingName


Instant 0 If set to 1 - Removes Calling Name from IP->TEL callsMib name: digitalGWextRemoveCallingNameINI Name: REMOVECALLINGNAMEProfile name: Digital SIP Digital Settings Profile

EscTransport

Type

Enum:NotConfigured(-

1), UDP(0),TCP(1), TLS(2)

Instant -1 RtcpXrEsc transport typeMib name: acGWRtcpXrEscTransportTypeINI Name: RTCPXRESCTRANSPORTTYPEProfile name: Digital SIP Digital Settings Profile

Isdn

DisconnectOn Busy

Tone

Enum:


Instant 0 1 - Release call if gateway receives busy or

fast busy tone. 0 - don't releaseMib name: miscIsdnDisconnectOnBusyToneINI Name: ISDNDISCONNECTONBUSYTONEProfile name: Digital SIP Digital Settings Profile

Play RBTOn ISDNTransfer


Instant 0 Play local RBT on TBCT/ECT/RLT transferMib name: digitalGWPlayRBTOnISDNTransfer INI Name: PLAYRBTONISDNTRANSFERProfile name: Digital SIP Digital Settings Profile

IgnoreISDN

SubAddress


Instant 0 Ignore ISDN SubaddressMib name: sipMiscIgnoreISDNSubaddressINI Name: IGNOREISDNSUBADDRESSProfile name: Digital SIP Digital Settings Profile

7/23/2019 LTRT-32105 Mediant 3000




2.12.6 Tab: Voice Mail

Frame: SIP Advanced Configuration , Tab: Voice Mail

ParameterName


DefaultValue

Description

LineTransfer

Mode

Enum:ip(0),

pbxblindtransfer(1),

pbxsemisupervised(2),

pbxsupervisedtransfer(3)

Instant 0 LineTransferMode: 0-ip 1-pbx blind transfer2-pbx semi supv transfer 3-supervisedtransfer (also known as warm transfer).(in TP, feature key and parameterEnableIPMDetectors needed)Mib name: voiceMailLineTransferModeINI Name: LINETRANSFERMODEProfile name: Digital SIP Advance Profile

Voice Mail

Interface

Enum:

none(0), dtmf(1),smdi(2), qsig(3),

isdnsetup(4)

Instant 0 Selects the method of communication

between PBX and the Gateway, that is usedinstead of legacy voicemailMib name: voiceMailInterfaceINI Name: VOICEMAILINTERFACEProfile name: Digital SIP Advance Profile

DigitPatterns

DigitPattern

Forward NoReason


Instant Digit pattern used to indicate Call Forwardwith no reason (PBX to VoiceMail)Mib name: vmDigitPatternNoReasonINI Name:DIGITPATTERNFORWARDNOREASONProfile name: Digital SIP Advance Profile

DigitPattern

Forward OnBusy


Instant Digit pattern used to indicate Call Forwardon busy (PBX to VoiceMail)Mib name: vmDigitPatternOnBusyINI Name:DIGITPATTERNFORWARDONBUSYProfile name: Digital SIP Advance Profile

DigitPattern

Forward OnNo Answer


Instant Digit pattern used to indicate Call Forwardon no answer (PBX to VoiceMail)Mib name: vmDigitPatternOnNoAnswerINI Name:

DIGITPATTERNFORWARDONNOANSWERProfile name: Digital SIP Advance Profile

DigitPattern

Forward OnDND


Instant Digit pattern used to indicate Call Forwardon Do Not Disturb (PBX to VoiceMail)Mib name: vmDigitPatternOnDNDINI Name:DIGITPATTERNFORWARDONDNDProfile name: Digital SIP Advance Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

DigitPatternInternal

Call


Instant Digit pattern used to indicate internal call(PBX to VoiceMail)Mib name: vmDigitPatternInternalCall

INI Name: DIGITPATTERNINTERNALCALLProfile name: Digital SIP Advance Profile

DigitPatternExternal

Call


Instant Digit pattern used to indicate external call(PBX to VoiceMail)Mib name: vmDigitPatternExternalCallINI Name:DIGITPATTERNEXTERNALCALLProfile name: Digital SIP Advance Profile

TelDisconnect

Code


Instant Disconnect call if digit string is received fromthe TEL side during sessionMib name: vmDigitPatternDisconnectCode

INI Name: TELDISCONNECTCODEProfile name: Digital SIP Advance Profile

VM DigitPattern On

BusyExternal


Instant "" Digit pattern used to indicate Call Forwardon busy (PBX to VoiceMail)Mib name:vmDigitPatternVmDigitPatternOnBusyExternalINI Name:DIGITPATTERNFORWARDONBUSYEXTProfile name: Digital SIP Advance Profile

VM DigitPattern On

No AnswerExternal


Instant "" Digit pattern used to indicate Call Forwardon no answer (PBX to VoiceMail)

Mib name:vmDigitPatternVmDigitPatternOnNoAnswer ExternalINI Name:DIGITPATTERNFORWARDONNOANSWEREXTProfile name: Digital SIP Advance Profile

VM DigitPattern On

DNDExternal


Instant "" Digit pattern used to indicate Call Forwardon Do Not Disturb (PBX to VoiceMail)Mib name:vmDigitPatternVmDigitPatternOnDNDExternalINI Name:DIGITPATTERNFORWARDONDNDEXTProfile name: Digital SIP Advance Profile

VM DigitPattern No

ReasonExternal


Instant "" Digit pattern used to indicate Call Forwardwith no reason (PBX to VoiceMail)Mib name:vmDigitPatternVmDigitPatternNoReasonExternalINI Name:DIGITPATTERNFORWARDNOREASONEXTProfile name: Digital SIP Advance Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Digit ToIgnore


Instant A digit (0-9,A-D,* or #) that if received as Src(S) or Redirect (R), the digit is ignored andnot added to that number. Used in DTMF

VoiceMail.Mib name: vmDigitPatternDigitToIgnoreINI Name:DIGITPATTERNDIGITTOIGNOREProfile name: Digital SIP Advance Profile

MWI

MWI OnCode


Instant Digit pattern used to notify PBX aboutmessages waiting for extension (added asprefix)Mib name: vmMWIOnCodeINI Name: MWIONCODE

Profile name: Digital SIP Advance ProfileMWI Off

CodeString

Up to 25 chars.Instant Digit pattern used to notify PBX about no

messages waiting for extension (added asprefix)Mib name: vmMWIOffCodeINI Name: MWIOFFCODEProfile name: Digital SIP Advance Profile

MWI SuffixCode


Instant MWI suffix code used to notify PBX aboutmessages waiting for extension (added assuffix to the extention number)Mib name: vmMWISuffixCodeINI Name: MWISUFFIXCODE

Profile name: Digital SIP Advance ProfileMWI

SourceNumber


Instant The phone number sent as source numbertoward PSTN for MWI setupMib name: vmMWISourceNumberINI Name: MWISOURCENUMBERProfile name: Digital SIP Advance Profile

SMDI

EnableSMDI


Offline 0 Enables the Simplified Message DeskInterface (SMDI). SMDI defines a methodwhereby telephony systems can providevoice-messaging systems with data required

by those telephony systems to processincoming calls intelligently. Whenever thephone system routes a call, it sends anSMDI message through an EIA/TIA-232connection to the voice-messaging systemthat tells it the line that it is using, the type ofcall that it is forwarding, and informationabout the source and destination of the call.0 = Normal Serial1 = Serial SMDIMib name: vmSMDIEnableINI Name: SMDIProfile name: Digital SIP Advance Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

SMDITimeout

Integer0-120000

Instant 2000 Time out for:1. From SMDI Info until SETUP2. From SETUP until SMDI event

Mib name: vmSMDITimeOutINI Name: SMDITIMEOUTProfile name: Digital SIP Advance Profile

2.12.7 Tab: SIP to ISDN Cause Mapping

Frame: SIP Advanced Configuration , Tab: SIP to ISDN Cause Mapping

ParameterName


DefaultValue

Descript ion

Index Integer1-12

NA 1Mib name: causeMapSIP2ISDNIndexINI Name: CAUSEMAPSIP2ISDN_INDEXProfile name: Not Profiled




Destroy(6)

Instant 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: causeMapSIP2ISDNRowStatusProfile name: Not Profiled

SIPResponse Integer-1-700 Instant -1 Mib name: causeMapSIP2ISDNSIPResponseINI Name:CAUSEMAPSIP2ISDN_SIPRESPONSEProfile name: Not Profiled

Q850 Cause Integer-1-127

Instant -1Mib name: causeMapSIP2ISDNQ850CauseINI Name:CAUSEMAPSIP2ISDN_ISDNRELEASECAUSEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.12.8 Tab: ISDN to SIP Cause Mapping

Frame: SIP Advanced Configuration , Tab: ISDN to SIP Cause Mapping

ParameterName


DefaultValue

Descript ion

Index Integer1-12

NA 1Mib name: causeMapISDN2SIPIndexINI Name: CAUSEMAPISDN2SIP_INDEXProfile name: Not Profiled



CreateAndGo(4),


Instant 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: causeMapISDN2SIPRowStatusProfile name: Not Profiled

Q850 Cause Integer-1-127

Instant -1Mib name: causeMapISDN2SIPQ850CauseINI Name:CAUSEMAPISDN2SIP_ISDNRELEASECAUSEProfile name: Not Profiled

SIPResponse

Integer-1-700

Instant -1Mib name: causeMapISDN2SIPSIPResponseINI Name:CAUSEMAPISDN2SIP_SIPRESPONSEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.12.9 Tab: Debug

Frame: SIP Advanced Configuration , Tab: Debug

ParameterName


DefaultValue

Description

CDRReportLevel

Enum:No(0), EndCall(1),

StartAndEndCall(2),ConnectAndEndCall(3),

StartConnectAndEndCall(4)

Instant 0 CDR reports timingMib name:loggerGwAppCdrReportLevelProfile name: Digital SIP AdvanceProfile

DebugLevel

Enum:logLevel0(0), logLevel1(1),logLevel2(2), logLevel3(3),logLevel4(4), logLevel5(5),

logLevel100(100),logLevel200(200)

Instant 0 Configure different debug levelMib name: loggerGwDebugLevelProfile name: Digital SIP AdvanceProfile

IP AddressOf CDRServer

IPAddress Instant Syslog server IP address for sendingCDRsMib name: loggerCDRSyslogServerIPINI Name: CDRSYSLOGSERVERIPProfile name: Digital SIP AdvanceProfile

7/23/2019 LTRT-32105 Mediant 3000




2.12.10 Tab: MLPP

Frame: SIP Advanced Conf iguration , Tab: MLPP

ParameterName


DefaultValue

Description

Call PriorityMode

Enum:Disable(0),MLPP(1),

Emergency(2)

Instant 0 Priority mode:0-disable1-MLPP2-emergencyMib name: mlppCallPriorityModeINI Name: CALLPRIORITYMODEProfile name: Digital SIP Advance Profile

Default NameSpace

Enum:DSN(1), DOD(2),

DRSN(3), UC(5)

Instant 1 MLPP Default NamespaceMib name: mlppDefaultNamespace

INI Name: MLPPDEFAULTNAMESPACEProfile name: Digital SIP Advance Profile

Default CallPriority


Instant "" SIP Default Call PriorityMib name: mlppDefaultCallPriorityINI Name: SIPDEFAULTCALLPRIORITYProfile name: Digital SIP Advance Profile

Diff Serv Integer0-63

Instant 50 DiffServ value for MLPP callsMib name: mlppDiffServINI Name: MLPPDIFFSERVProfile name: Digital SIP Advance Profile

Preemption

ToneDuration

Integer

0-60

Instant 3 Preemption Tone Duration, 0-60 seconds.

Mib name: mlppPreemptionToneDurationINI Name: PREEMPTIONTONEDURATIONProfile name: Digital SIP Advance Profile

DefaultServiceDomain


Instant "000000" MLPP Default Service Domain String (6Hex Digits)Mib name: mlppDefaultServiceDomainINI Name:MLPPDEFAULTSERVICEDOMAINProfile name: Digital SIP Advance Profile

NormalizedServiceDomain


Instant "000000" MLPP Normalized Service Domain String (6Hex Digits)Mib name: mlppNormalizedServiceDomain

INI Name:MLPPNORMALIZEDSERVICEDOMAINProfile name: Digital SIP Advance Profile

RTP DSCPfor MLPPRoutine

Integer-1-63

Instant -1 Defines the RTP DSCP for MLPP RoutinecallMib name: mlppRoutineRTPDSCPINI Name: MLPPROUTINERTPDSCPProfile name: Digital SIP Advance Profile

RTP DSCPfor MLPPPriority

Integer-1-63

Instant -1 Defines the RTP DSCP for MLPP PrioritycallMib name: mlppPriorityRTPDSCP

INI Name: MLPPPRIORITYRTPDSCPProfile name: Digital SIP Advance Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

RTP DSCPfor MLPPImmediate

Integer-1-63

Instant -1 Defines the RTP DSCP for MLPPImmediate callMib name: mlppImmediateRTPDSCP

INI Name: MLPPIMMEDIATERTPDSCPProfile name: Digital SIP Advance Profile

RTP DSCPfor MLPP

Flash

Integer-1-63

Instant -1 Defines the RTP DSCP for MLPP Flash callMib name: mlppFlashRTPDSCPINI Name: MLPPFLASHRTPDSCPProfile name: Digital SIP Advance Profile

RTP DSCPfor MLPP

FlashOverride

Integer-1-63

Instant -1 Defines the RTP DSCP for MLPP Flash-Override callMib name: mlppFlashOverRTPDSCPINI Name: MLPPFLASHOVERRTPDSCPProfile name: Digital SIP Advance Profile

RTP DSCPfor MLPP

Flash-Override-Override

Integer-1-63

Instant -1 Defines the RTP DSCP for MLPP Flash-Override-Override callMib name: mlppFlashOverOverRTPDSCPINI Name:MLPPFLASHOVEROVERRTPDSCPProfile name: Digital SIP Advance Profile

E911 MLPPBehavior

Enum:standardMode(0),routineMode(1)

Instant 0 Defines the MLPP E911 Preemption mode:(0)-Standard Mode (ets calls will have thehighest priority and can preemt any mlppcall),(1)-Treat as routine mode (ets calls aretreated as routine calls)

Mib name: mlppE911BehaviorINI Name: E911MLPPBEHAVIORProfile name: Digital SIP Advance Profile

7/23/2019 LTRT-32105 Mediant 3000




2.12.11 Tab: LDAP Settings

Frame: SIP Advanced Configuration , Tab: LDAP Settings

ParameterName


DefaultValue

Description

Server Mode Enum:notApplicable(0),

connectionBroken(1),connecting(2),connected(3)

Read-Only 0 LDAP server status.Mib name: acSysLDAPStatusServerModeProfile name: Not Profiled

Server Ip IPAddress Online This parameter defines the IP address indotted format notation.e.g., 192.10.1.255Range = Legal IP address

Mib name: acSysLDAPServerIpINI Name: LDAPSERVERIPProfile name: Digital SIP Advance Profile

Server Port Integer0-65535

Online 389 Defines the port number for the LDAPserver.Range = Valid port numberMib name: acSysLDAPServerPortINI Name: LDAPSERVERPORTProfile name: Digital SIP Advance Profile

Server MaxRespond

Time

Integer0-86400

Instant 3000 Defines the period of time the module willwait for LDAP server response (seconds)Mib name:acSysLDAPServerMaxRespondTimeINI Name:LDAPSERVERMAXRESPONDTIMEProfile name: Digital SIP Advance Profile

ServerDomainName


Online This parameter is used to indicate thename of LDAP server.Mib name:acSysLDAPServerDomainNameINI Name: LDAPSERVERDOMAINNAMEProfile name: Digital SIP Advance Profile

Search DN String

Up to 255 chars.

Online This parameter is used to indicate the

search DN for LDAP search requestMib name: acSysLDAPSearchDNINI Name: LDAPSEARCHDNProfile name: Digital SIP Advance Profile

Password String Online 255 This parameter is used to indicate the userpassword of LDAP server.Mib name: acSysLDAPPasswordINI Name: LDAPPASSWORDProfile name: Digital SIP Advance Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Bind DN StringUp to 255 chars.

Online This parameter is used to indicate the ofLDAP server bind DNMib name: acSysLDAPBindDN

INI Name: LDAPBINDDNProfile name: Digital SIP Advance Profile

2.12.12 Tab: IP Media AMD

Frame: SIP Advanced Configuration , Tab: IP Media AMD

ParameterName


DefaultValue

Description

DetectionDirection

Enum:acAmdTdmDetecti

on(0),acAmdNetworkDet

ection(1)

Online 0 Determines the AMD (Answer MachineDetector) detection direction.


0 = Detection from the TDM side1 = Detection from the Network sideMib name:acIPMediaAMDDetectionDirectionINI Name: AMDDETECTIONDIRECTIONProfile name: Not Profiled


Online 3 Determines the AMD (Answer MachineDetector) detection sensitivity:

0 = Best detection of an answering machine7 = Best detection of a live callMib name: acIPMediaAMDSensitivityINI Name: AMDDETECTIONSENSITIVITYProfile name: Not Profiled

DetectionSensitivity

HighResolution

Integer0-15

Online 8 Determines the AMD (Answer MachineDetector) high resolution detectionsensitivity.The high resolution has 16 levels ofsensitivity while the normal resolution(Answer Machine Detector Sensitivity) has

8 levels.

0 = Best detection of an answering machine15 = Best detection of a live callMib name:acIPMediaAMDDetectionSensitivityHighResolutionINI Name: AMDSENSITIVITYLEVELProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

SensitivityResolution

Enum:Normal(0), High(1)

Online 0 Determines the AMD (Answer MachineDetector) detection sensitivity resolution:

0 = Normal detection sensitivity resolution(8 sensitivity levels)1 = High detection sensitivity resolution (16sensitivity levels)Mib name:acIPMediaAMDSensitivityResolutionINI Name:AMDSENSITIVITYPARAMETERSUITProfile name: Not Profiled

BeepDetectionTimeout

Integer0-1638

Online 200 Determines the AMD (Answer MachineDetector) Beep detection timeout.

Units of 100 milliseconds, values from 0 to1638 (163.8 seconds).Mib name:acIPMediaAMDBeepDetectionTimeoutINI Name:AMDBEEPDETECTIONTIMEOUTProfile name: Not Profiled

BeepDetectionSensitivity

Integer0-3

Online 0 Determines the AMD (Answer MachineDetector) Beep detection sensitivity.

0 - Least sensitive.3 - Most sensitive.

Mib name:acIPMediaAMDBeepDetectionSensitivityINI Name:AMDBEEPDETECTIONSENSITIVITYProfile name: Not Profiled

SensitivityParameter

Suit

Integer0-7

Online 0 Determines the serial number of the AMD(Answer Machine Detector) parameter suit:0 = USA Parameter Suit with normaldetection sensitivity resolution (8 sensitivitylevels)1 = USA Parameter Suit with high detectionsensitivity resolution (16 sensitivity levels)2-7 : other countries parameter suits with up

to 16 sensitivity levels.Mib name:acIPMediaAMDSensitivityParameterSuitINI Name:AMDSENSITIVITYPARAMETERSUITProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

SensitivityLevel

Integer0-15

Online 8 Determines the AMD (Answer MachineDetector) level of detection sensitivity.It has 16 levels of sensitivity :

0 = Best detection of an answering machine15 = Best detection of a live callMib name: acIPMediaAMDSensitivityLevelINI Name: AMDSENSITIVITYLEVELProfile name: Not Profiled

Amd BeepDetection

Mode

Enum:Disabled(0),

StartAfterAmdDetection(1),

StartImmediately(2)

Instant 0 Set the AMD beep detection mode:0 - disabled1- start after AMD detection2 - start immediatelyMib name: miscAmdBeepDetectionModeINI Name: AMDBEEPDETECTIONMODEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.13 Frame: SIP Coder Group 1 Provisioning


Frame: SIP Coder Group 1 Provis ioning, Tab: General Settings

ParameterName


DefaultValue

Description

Coder Name Enum:g7231(0),

g711Alaw64k(1),g711Ulaw64k(2),g729(3), g726(5),

g726r16(6),

g726r24(7),g726r32(8),g726r40(9),

netCoder8(10),netCoder6-4(11),netCoder7-2(12),netCoder8-8(13),

gWTransparent(14),g729AnnexB(17),

eVRC(22), amr(23),gsm-fr(24), gsm-

ms(25), GsmEfr(26),ILBC(27),

QCELP(28), T38(29),g711Alaw64k-VBD(30), g711Ulaw64k-VBD (31), EVRC-B(32), G722(33),

AMR-WB(34),eg711Alaw(35),eg711Ulaw(36),

g7291(37),v1501mr(38), ms-rta-nb(39), wb-rta(40),invalideCoder(99)

Instant 0 Coders Group name.Mib name: codersGroup0NameINI Name: CODERSGROUP0_NAMEProfile name: Not Profiled

PacketizationTime

Integer0-4294967295

Instant 0 Coders Group packetization time.Mib name:codersGroup0PacketizationTimeINI Name: CODERSGROUP0_PTIMEProfile name: Not Profiled

Rate Integer0-64000

Instant 0 Coders Group rate.Mib name: codersGroup0RateINI Name: CODERSGROUP0_RATEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

PayloadType

Integer-1-127

Instant -1 Coders Group payload type.Mib name: codersGroup0PayloadTypeINI Name:

CODERSGROUP0_PAYLOADTYPEProfile name: Not Profiled

SilenceSuppression

Enum:Disable(0),Enable(1),

EnableAdaptations(2)

Instant 0 Coders Group silence suppression.Mib name:codersGroup0SilenceSuppressionINI Name: CODERSGROUP0_SCEProfile name: Not Profiled




ParameterName


DefaultValue

Description


g711Alaw64k(1),g711Ulaw64k(2),

g729(3), g726(5),g726r16(6),g726r24(7),g726r32(8),g726r40(9),




ms(25), GsmEfr(26),ILBC(27),QCELP(28), T38(29),g711Alaw64k-VBD(30), g711Ulaw64k-VBD (31), EVRC-B(32), G722(33),


g7291(37),v1501mr(38), ms-rta-nb(39), wb-rta(40),

invalideCoder(99)


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

PacketizationTime

Integer0-4294967295

Instant 0 Coders Group packetization time.Mib name:codersGroup0PacketizationTime

INI Name: CODERSGROUP0_PTIMEProfile name: Not Profiled

Rate Integer0-64000


PayloadType

Integer-1-127

Instant -1 Coders Group payload type.Mib name: codersGroup0PayloadTypeINI Name:CODERSGROUP0_PAYLOADTYPEProfile name: Not Profiled

SilenceSuppression




7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000




ParameterName


DefaultValue

Description


g711Alaw64k(1),g711Ulaw64k(2),g729(3), g726(5),

g726r16(6),

g726r24(7),g726r32(8),g726r40(9),









PacketizationTime

Integer0-4294967295


Rate Integer0-64000


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

PayloadType

Integer-1-127



SilenceSuppression







ParameterName


DefaultValue

Description


g711Alaw64k(1),g711Ulaw64k(2),

g729(3), g726(5),g726r16(6),g726r24(7),g726r32(8),g726r40(9),




ms(25), GsmEfr(26),ILBC(27),QCELP(28), T38(29),g711Alaw64k-VBD(30), g711Ulaw64k-VBD (31), EVRC-B(32), G722(33),


g7291(37),v1501mr(38), ms-rta-nb(39), wb-rta(40),

invalideCoder(99)


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

PacketizationTime

Integer0-4294967295

Instant 0 Coders Group packetization time.Mib name:codersGroup0PacketizationTime

INI Name: CODERSGROUP0_PTIMEProfile name: Not Profiled

Rate Integer0-64000


PayloadType

Integer-1-127

Instant -1 Coders Group payload type.Mib name: codersGroup0PayloadTypeINI Name:CODERSGROUP0_PAYLOADTYPEProfile name: Not Profiled

SilenceSuppression




7/23/2019 LTRT-32105 Mediant 3000




2.17 Frame: SIP Coder Provisioning


Frame: SIP Coder Provision ing, Tab: General Settings

ParameterName


DefaultValue

Description


g711Alaw64k(1),g711Ulaw64k(2),g729(3), g726(5),

g726r16(6),

g726r24(7),g726r32(8),g726r40(9),









PacketizationTime

Integer0-4294967295


Rate Integer0-64000


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

PayloadType

Integer-1-127



SilenceSuppression




2.18 Frame: SIP Endpoints

2.18.1 Tab: Phones

Frame: SIP Endpoints, Tab: Phones

ParameterName


DefaultValue

Description

Index Integer0-100

NA 0 Channel numbers, starting at 0.Mib name: channelsIndexINI Name: TRUNKGROUP_INDEXProfile name: Not Profiled




Destroy(6)

NA 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: channelsRowStatusProfile name: Not Profiled

StartingChannel

Integer1-2016

Instant 1 Starting Channel for this trunk/hunt groupMib name: channelsStartingChINI Name:TRUNKGROUP_FIRSTBCHANNELProfile name: Not Profiled

Last Channel Integer1-2016

Instant 1 Last Channel for the trunk/hunt groupMib name: channelsLastChINI Name:TRUNKGROUP_LASTBCHANNELProfile name: Not Profiled

StartingPhone

Number


Instant Starting Phone NumberMib name: channelsStartingPhoneNumINI Name:TRUNKGROUP_FIRSTPHONENUMBERProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Trunk/HuntGroup ID

Integer0-255

Instant 0 Trunk/Hunt group IDMib name: channelsTrunkGroupIDINI Name:

TRUNKGROUP_TRUNKGROUPNUMProfile name: Not Profiled

Trunk ID Integer0-255

Instant 0 Trunk/Hunt group IDMib name: channelsTrunkIDINI Name:TRUNKGROUP_FIRSTTRUNKIDProfile name: Not Profiled

Last Trunk ID Integer0-255

Instant 255 Last Trunk/Hunt group IDMib name: channelsLastTrunkIDINI Name: TRUNKGROUP_LASTTRUNKIDProfile name: Not Profiled

2.18.2 Tab: Account

Frame: SIP Endpoints, Tab: Account

ParameterName


DefaultValue

Description

AccountIndex

Integer0-31

Read-Only 0Mib name: accountIndexINI Name: ACCOUNT_INDEX

Profile name: Not ProfiledAccount Row

StatusEnum:

Active(1),NotInService(2),

NotReady(3),CreateAndGo(4),


NA 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: accountRowStatusProfile name: Not Profiled

AccountServed Trunk

Group

Integer-1-100

Instant -1 GwApp Accounts tableMib name: accountServedTrunkGroupINI Name:ACCOUNT_SERVEDTRUNKGROUP


AccountServed IP

Group

Integer-1-9

Instant -1 GwApp Accounts tableMib name: accountServedIPGroupINI Name: ACCOUNT_SERVEDIPGROUPProfile name: Not Profiled

AccountServing IP

Group

Integer-1-9

Instant -1 GwApp Accounts tableMib name: accountServingIPGroupINI Name: ACCOUNT_SERVINGIPGROUPProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

AccountUsername


Instant GwApp Accounts tableMib name: accountUsernameINI Name: ACCOUNT_USERNAME


AccountPassword


Instant GwApp Accounts tableMib name: accountPasswordINI Name: ACCOUNT_PASSWORDProfile name: Not Profiled

Account HostName


Instant GwApp Accounts tableMib name: accountHostNameINI Name: ACCOUNT_HOSTNAMEProfile name: Not Profiled

AccountRegister

Enum:no(0), yes(1)

Instant 0 GwApp Accounts tableMib name: accountRegister

INI Name: ACCOUNT_REGISTERProfile name: Not Profiled

AccountContact User


Instant GwApp Accounts tableMib name: accountContactUserINI Name: ACCOUNT_CONTACTUSERProfile name: Not Profiled

2.18.3 Tab: IP Group

Frame: SIP Endpoints, Tab: IP Group

ParameterName


DefaultValue

Description

IP GroupIndex

Integer1-31

Read-Only 1Mib name: ipGroupIndexINI Name: IPGROUP_INDEXProfile name: Not Profiled

IP GroupRow Status

Enum:Active(1),


CreateAndGo(4),CreateAndWait(5),Destroy(6)

NA 3 Row-Status Textual Conventions asdefined in RFC 2579: Textual Conventionsfor SMIv2Mib name: ipGroupRowStatus


IP GroupType

Enum:server(0), user(1),

gateway(2)

Instant 0 GwApp IP Group TableMib name: ipGroupTypeINI Name: IPGROUP_TYPEProfile name: Not Profiled

IP GroupDescription


Instant GwApp IP Group TableMib name: ipGroupDescriptionINI Name: IPGROUP_DESCRIPTIONProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

IP GroupProxy Set Id

Integer-1-5

Instant -1 GwApp IP Group TableMib name: ipGroupProxySetIdINI Name: IPGROUP_PROXYSETID


IP GroupSIP Group

Name


Instant GwApp IP Group TableMib name: ipGroupSIPGroupNameINI Name: IPGROUP_SIPGROUPNAMEProfile name: Not Profiled

IP GroupContact User


Instant GwApp IP Group TableMib name: ipGroupContactUserINI Name: IPGROUP_CONTACTUSERProfile name: Not Profiled

IP GroupEnable

Survivability

Enum:disable(0),

enableIfNecessary(1),alwaysEnable(2)

Instant 0 GwApp IP Group TableMib name: ipGroupEnableSurvivability

INI Name:IPGROUP_ENABLESURVIVABILITYProfile name: Not Profiled

IP GroupServing IP

Group

Integer-1-9

Instant -1 GwApp IP Group TableMib name: ipGroupServingIPGroupINI Name: IPGROUP_SERVINGIPGROUPProfile name: Not Profiled

IP Group SipRe Routing

Mode

Enum:NotConfigured(-1),

Standard(0),Proxy(1),

RoutingTable(2)

Instant -1 GwApp IP Group TableMib name: ipGroupSipReRoutingModeINI Name:IPGROUP_SIPREROUTINGMODEProfile name: Not Profiled

IP GroupProfileId

Integer0-9

Instant 0Mib name: ipGroupProfileIdINI Name: IPGROUP_PROFILEIDProfile name: Not Profiled

IP GroupMediaRealm


InstantMib name: ipGroupMediaRealmINI Name: IPGROUP_MEDIAREALMProfile name: Not Profiled

Max Num OfRegistered

Users

Integer-1-3000

Instant -1 Max Number Of Registered Users.MP1xx - 25M1K - 200

M2K- 250M3K - 3000Mib name: ipGroupMaxNumOfRegUsersINI Name:IPGROUP_MAXNUMOFREGUSERSProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.19 Frame: SIP Manipulations

2.19.1 Tab: Definitions

Frame: SIP Manipulations, Tab: Definitions

ParameterName


DefaultValue

Description

Remove Prefix Enum:No(0), Yes(1)

Instant 0 Remove prefix defined in IP to Trunk Grouptable (IP to Tel calls)Mib name: manipulationRemovePrefixINI Name: REMOVEPREFIXProfile name: Not Profiled

Add TrunkGroup ID As

Prefix

Enum:No(0), Yes(1)

Instant 0 Add Trunk Group ID on which the call wasreceived as the called number prefixMib name:manipulationAddTrunkGroupAsPrefixINI Name: ADDTRUNKGROUPASPREFIXProfile name: Not Profiled

Add TrunkGroup AsPrefix ToSource

Enum:No(0), Yes(1)

Instant 0 Add Trunk Group ID on which the call wasreceived as the calling number prefixMib name:manipulationAddTrunkGroupAsPrefixToSourceINI Name:ADDTRUNKGROUPASPREFIXTOSOURCEProfile name: Not Profiled

Add Port ID AsPrefix Enum:No(0), Yes(1) Instant 0 Add port number (Analog gateway) / Trunk ID(Digital gateway) as called number prefixMib name: manipulationAddPortAsPrefixINI Name: ADDPORTASPREFIXProfile name: Not Profiled

ReplaceEmpty DstWith PortNumber


Instant 0 Replace empty destination number (receivedfrom Tel side) with port numberMib name:manipulationReplaceEmptyDstWithPortNumberINI Name:REPLACEEMPTYDSTWITHPORTNUMBERProfile name: Not Profiled

Use SourceNumber As

Display Name

Enum:Disable (0),Enable (1),

Overwrite (2)

Instant 0 if set to 1 Use source number as display nameif empty.if set to 2 always use source number asdisplay name .Mib name:manipulationUseSourceNumberAsDisplayNameINI Name:USESOURCENUMBERASDISPLAYNAMEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Add NPI AndTON As Prefix

To Called

Number


Instant 0 Add NPI and TON as prefix to called numberMib name:manipulationAddNPIandTON2CalledNumber

INI Name:ADDNPIANDTON2CALLEDNUMBERProfile name: Not Profiled

Add NPI AndTON As Prefix

To CallingNumber


Instant 0 Add NPI and TON as prefix to calling numberMib name:manipulationAddNPIandTON2CallingNumber INI Name:ADDNPIANDTON2CALLINGNUMBERProfile name: Not Profiled

Use DisplayName As

SourceNumber

Enum:Disable(0),

Enable(1)

Instant 0 when set to 1 then If display name exists, useit as source number. If not, set presentation as

restrictedMib name:manipulationUseDisplayNameAsSourceNumberINI Name:USEDISPLAYNAMEASSOURCENUMBERProfile name: Not Profiled

Add Prefix ToRedirectNumber


Instant Prefix which added to redirect phone numberMib name:manipulationAddPrefixToRedirectNumberINI Name: PREFIX2REDIRECTNUMBERProfile name: Not Profiled

Add PhoneContext AsPrefix

Enum:No(0), Yes(1) Instant 0 add the phone context to src/dest phonenumber as prefixMib name:manipulationAddPhoneContextAsPrefixINI Name: ADDPHONECONTEXTASPREFIXProfile name: Not Profiled

Blind TransferAdd Prefix


Instant 0 Add keying sequence for performing blindtransfer as transfer number prefixMib name: manipulationBlindTransferAddPrefixINI Name: KEYBLINDTRANSFERADDPREFIXProfile name: Not Profiled

Copy Dest to

RedirectNumber

Enum:

Disable(0),AfterManipulat

ion(1),BeforeManipul

ation(2)

Instant 0 0 - Redirect N not affected,1- Called N after

manipulation from TEL2IP call will also beused as Redirect N,2 - the Called N beforemanipulation - as Redirect NMib name:digitalGWextCopyDest2RedirectNumberINI Name: COPYDEST2REDIRECTNUMBERProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

SourceManipulation

Mode

Enum:fromAndPai(0), fromOnly(1)

Instant 0 Describes the headers containing sourcenumber after manipulation:(0) both FROM and P-Asserted contain src

number after manipulations(1) only FROM contains src number aftermanipulationMib name: manipulationSourceModeINI Name: SOURCEMANIPULATIONMODEProfile name: Not Profiled

Set Tel To IpRedirectReason

Enum:notConfigured(

-1),unknown(0),

bust(1),noReply(2),

networkBusy(3),

deflection(4),dTEOutOfOrd

er(9),forwardingDT

E(10),transfer(13),pickUp(14),

systematicOrUnconditional(1

5)

Instant -1 If redirect (diversion) data is received from thePSTN interface, the redirect reason is set tothe value of this parameter, before transferringit to the IP.default value is -1 --> not change the receivedvalue.

Mib name:manipulationSetTel2IpRedirectReasonINI Name: SETTEL2IPREDIRECTREASONProfile name: Not Profiled

Set Ip To TelRedirectReason

Enum:notConfigured(-1),

unknown(0),bust(1),

noReply(2),networkBusy(3

),deflection(4),dTEOutOfOrd

er(9),forwardingDT

E(10),

transfer(13),pickUp(14),systematicOrUnconditional(1

5)

Instant -1 If redirect (diversion) data is received from theIP side, the redirect reason is set to the valueof this parameter, before transferring it to thePSTN interface.default value is -1 --> not change the receivedvalue.

Mib name:manipulationSetIp2TelRedirectReasonINI Name: SETIP2TELREDIRECTREASONProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Set Ip To TelRedirect

Screening

Indicator

Enum:notConfigured(

-1),

userProvided(0),

userPassed(1),

userFailed(2),networkProvid

ed(3)

Instant -1 Override screening indicator value of theredirect number in Setup messages to PSTNinterface

Mib name:manipulationSetIp2TelRedirectScreeningIndicatorINI Name:SETIP2TELREDIRECTSCREENINGINDProfile name: Not Profiled

Tel To IPSourceNumber

Mapping DialPlan Mode

Enum:reserved(0),replaced(1)

Instant 0 Tel to IP Source Number Mapping Dial PlanMode - reserved or replacedMib name:miscTel2IPSourceNumberMappingDialPlanMode

INI Name:TEL2IPSOURCENUMBERMAPPINGDIALPLANMODEProfile name: Not Profiled

PerformAdditionalIP2TELSource

Manipulation


Instant 0 Perform Additional IP2TEL SourceManipulationMib name:sipMiscPerformAdditionalIP2TELSourceManipulationINI Name:PERFORMADDITIONALIP2TELSOURCEMANIPULATION

Profile name: Not ProfiledPerform

AdditionalIP2TEL

DestinationManipulation


Instant 0 Perform Additional IP2TEL DestinationManipulationMib name:sipMiscPerformAdditionalIP2TELDestinationManipulationINI Name:PERFORMADDITIONALIP2TELDESTINATIONMANIPULATIONProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.19.2 Tab: Destination IP to Telcom

Frame: SIP Manipulations, Tab: Destination IP to Telcom

ParameterName


DefaultValue

Description

Index Integer0-99

NA 0 Destination number, starting at 0.Mib name: dstIP2TELIndexINI Name: NUMBERMAPIP2TEL_INDEXProfile name: Not Profiled


NotInService(2),

NotReady(3)

,CreateAndG

o(4),CreateAndW

ait(5),Destroy(6)

NA 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: dstIP2TELRowStatusProfile name: Not Profiled

DestinationPrefix

StringUp to 100

chars.

InstantMib name: dstIP2TELPrefixINI Name:NUMBERMAPIP2TEL_DESTINATIONPREFIXProfile name: Not Profiled

Source Prefix StringUp to 100

chars.

Instant Source PrefixMib name: dstIP2TELSourcePrefixINI Name:NUMBERMAPIP2TEL_SOURCEPREFIXProfile name: Not Profiled

Source IPAddress


Instant Source IPMib name: dstIP2TELSourceIPINI Name:NUMBERMAPIP2TEL_SOURCEADDRESSProfile name: Not Profiled

StrippedDigits From

Left

Integer0-211

Instant 0 Num of stripped digits, Remove from left.Mib name: dstIP2TELNumOfStrippedDigits

INI Name:NUMBERMAPIP2TEL_REMOVEFROMLEFTProfile name: Not Profiled

StrippedDigits From

Right

Integer0-211

Instant 0 Num Of digits To Remove from Right.Mib name:dstIP2TELNumOfDigitsToRemFromRightINI Name:NUMBERMAPIP2TEL_REMOVEFROMRIGHTProfile name: Not Profiled

Prefix ToAdd


Instant Prefix to AddMib name: dstIP2TELPrefixToAddINI Name: NUMBERMAPIP2TEL_PREFIX2ADD


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Suffix To Add StringUp to 49chars.

Instant Suffix To AddMib name: dstIP2TELSuffix2AddINI Name: NUMBERMAPIP2TEL_SUFFIX2ADD


Number OfDigits To

Leave

Integer0-255

Instant 0 Number of digits to leaveMib name: dstIP2TELNumOfDigitsToLeaveINI Name:NUMBERMAPIP2TEL_LEAVEFROMRIGHTProfile name: Not Profiled

Number Plan Enum:Unknown(0),E164Public(

1),Private(9),

NotConfigured(255)

Instant 0 Number PlanMib name: dstIP2TELNumberPlanINI Name:NUMBERMAPIP2TEL_NUMBERPLANProfile name: Not Profiled

NumberType

Enum:Unknown(0),International-Level2Regio

nal(1),National-

Level1Regional(2),

NetworkSpecific-

NetworkPIS

N(3),Subscriber-Level0Regio

nal(4),Abbreviated(

6),NotConfigure

d(255)

Instant 0 Number TypeMib name: dstIP2TELNumberTypeINI Name:NUMBERMAPIP2TEL_NUMBERTYPEProfile name: Not Profiled

IsPresentationRestricted

Integer0-255

Instant 255 Is Presentation RestrictedMib name: dstIP2TELIsPresentationRestrictedINI Name:NUMBERMAPIP2TEL_ISPRESENTATIONRES

TRICTEDProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.19.3 Tab: Destination Telcom to IP

Frame: SIP Manipulations, Tab: Destination Telcom to IP

ParameterName


DefaultValue

Description

Index Integer0-119

NA 0 Destination number, starting at 0.Mib name: dstTEL2IPIndexINI Name: NUMBERMAPTEL2IP_INDEXProfile name: Not Profiled


NotInService(2),

NotReady(3),

CreateAndGo(4),

CreateAndWait(5),

Destroy(6)

NA 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: dstTEL2IPRowStatusProfile name: Not Profiled

SourceTrunk Group

ID

Integer-1-99

Instant -1 GwApp Tel-to-IP Destination Phone NumberManipulation Rules TableMib name: dstTEL2IPSourceTrunkGroupIDINI Name:NUMBERMAPTEL2IP_SRCTRUNKGROUPIDProfile name: Not Profiled

DestinationPrefix

StringUp to 100

chars.

InstantMib name: dstTEL2IPPrefixINI Name:NUMBERMAPTEL2IP_DESTINATIONPREFIXProfile name: Not Profiled

SourcePrefix

StringUp to 100

chars.

InstantMib name: dstTEL2IPSourcePrefixINI Name:NUMBERMAPTEL2IP_SOURCEPREFIXProfile name: Not Profiled

StrippedDigits From

Left

Integer0-211

Instant 0 Num of stripped digitsMib name: dstTEL2IPNumOfStrippedDigits

INI Name:NUMBERMAPTEL2IP_REMOVEFROMLEFTProfile name: Not Profiled

StrippedDigits From

Right

Integer0-211

Instant 0 Num Of digits To Remove from Right.Mib name:dstTEL2IPNumOfDigitsToRemFromRightINI Name:NUMBERMAPTEL2IP_REMOVEFROMRIGHTProfile name: Not Profiled

Prefix ToAdd


Instant Prefix to AddMib name: dstTEL2IPPrefixToAddINI Name: NUMBERMAPTEL2IP_PREFIX2ADD


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Suffix ToAdd


Instant Suffix To AddMib name: dstTEL2IPSuffix2AddINI Name: NUMBERMAPTEL2IP_SUFFIX2ADD


Number OfDigits To

Leave

Integer0-255

Instant 0 Number of digits to leaveMib name: dstTEL2IPNumOfDigitsToLeaveINI Name:NUMBERMAPTEL2IP_LEAVEFROMRIGHTProfile name: Not Profiled

Source IPAddress


Instant "*" Source AddressMib name: dstTEL2IPSourceIPAddressINI Name:NUMBERMAPTEL2IP_SOURCEADDRESSProfile name: Not Profiled

Source IPGroup ID

Integer-1-8

Instant -1 GwApp Tel-to-IP Destination Phone NumberManipulation Rules TableMib name: dstTEL2IPSourceIPGroupIDINI Name:NUMBERMAPTEL2IP_SRCIPGROUPIDProfile name: Not Profiled


Integer0-255

Instant 255 Is Presentation RestrictedMib name: dstTEL2IPIsPresentationRestrictedINI Name:NUMBERMAPTEL2IP_ISPRESENTATIONRESTRICTEDProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.19.4 Tab: Source IP to Telcom

Frame: SIP Manipulations, Tab: Source IP to Telcom

ParameterName


DefaultValue

Description

Index Integer0-19

NA 0 Source number, starting at 0.Mib name: srcIP2TELIndexINI Name:SOURCENUMBERMAPIP2TEL_INDEXProfile name: Not Profiled

Status Enum:Active(1)

,NotInSer

vice(2),NotRead

y(3),CreateAndGo(4),CreateAndWait(5

),Destroy(

6)

NA 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: srcIP2TELRowStatusProfile name: Not Profiled

DestinationPrefix

StringUp to

100chars.

InstantMib name: srcIP2TELDestPrefix

INI Name:SOURCENUMBERMAPIP2TEL_DESTINATIONPREFIXProfile name: Not Profiled

Source Prefix StringUp to100

chars.

InstantMib name: srcIP2TELPrefixINI Name:SOURCENUMBERMAPIP2TEL_SOURCEPREFIXProfile name: Not Profiled

Source IPAddress

StringUp to 15

chars.

Instant "*" Source AddressMib name: srcIP2TELSourceIPAddress

INI Name:SOURCENUMBERMAPIP2TEL_SOURCEADDRESSProfile name: Not Profiled

StrippedDigits From

Left

Integer0-211

Instant 0 Num of stripped digitsMib name: srcIP2TELNumOfStrippedDigitsINI Name:SOURCENUMBERMAPIP2TEL_REMOVEFROMLEFTProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

StrippedDigits From

Right

Integer0-211

Instant 0 Num Of digits To Remove from Right.Mib name:srcIP2TELNumOfDigitsToRemFromRight

INI Name:SOURCENUMBERMAPIP2TEL_REMOVEFROMRIGHTProfile name: Not Profiled

Prefix To Add StringUp to 49chars.

Instant Prefix to AddMib name: srcIP2TELPrefixToAddINI Name:SOURCENUMBERMAPIP2TEL_PREFIX2ADDProfile name: Not Profiled

Suffix To Add StringUp to 49

chars.

Instant Suffix To AddMib name: srcIP2TELSuffix2Add

INI Name:SOURCENUMBERMAPIP2TEL_SUFFIX2ADDProfile name: Not Profiled

Number OfDigits To

Leave

Integer0-255

Instant 0 Number of digits to leaveMib name: srcIP2TELNumOfDigitsToLeaveINI Name:SOURCENUMBERMAPIP2TEL_LEAVEFROMRIGHTProfile name: Not Profiled

Number Plan Enum:Unknown

(0),

E164Public(1),Private(9

),NotConfigured(25

5)

Instant 0 Number PlanMib name: srcIP2TELNumberPlanINI Name:

SOURCENUMBERMAPIP2TEL_NUMBERPLANProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Number Type Enum:Unknown

(0),

International-

Level2Regional(1

),National-Level1Regional(2

),NetworkSpecific-NetworkPISN(3),Subscrib

er-Level0Regional(4

),Abbreviated(6),

NotConfigured(25

5)

Instant 0 Number TypeMib name: srcIP2TELNumberTypeINI Name:SOURCENUMBERMAPIP2TEL_NUMBERTYPEProfile name: Not Profiled

Presentation Enum:NotBlock

ed(0),Blocked(

1),NotConfigured(25

5)

Instant 255 PresentationMib name: srcIP2TELPresentation

INI Name:SOURCENUMBERMAPIP2TEL_ISPRESENTATIONRESTRICTEDProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.19.5 Tab: Source Telcom to IP

Frame: SIP Manipulations, Tab: Source Telcom to IP

ParameterName


DefaultValue

Description

Index Integer0-119

NA 0 Source number, starting at 0.Mib name: srcTEL2IPIndexINI Name: SOURCENUMBERMAPTEL2IP_INDEXProfile name: Not Profiled

Status Enum:Active(1),NotInServi

ce(2),NotReady(

3),CreateAnd

Go(4),CreateAnd

Wait(5),Destroy(6)

NA 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: srcTEL2IPRowStatusProfile name: Not Profiled

Source TrunkGroup ID

Integer-1-99

Instant -1 GwApp IP-toTel Destination Phone NumberManipulation Rules TableMib name: srcTEL2IPSourceTrunkGroupIDINI Name:NUMBERMAPIP2TEL_SRCTRUNKGROUPIDProfile name: Not Profiled

Source IPGroup ID

Integer-1-8

Instant -1 GwApp IP-toTel Destination Phone NumberManipulation Rules TableMib name: srcTEL2IPSourceIPGroupIDINI Name:NUMBERMAPIP2TEL_SRCIPGROUPIDProfile name: Not Profiled

DestinationPrefix

StringUp to 100

chars.

InstantMib name: srcTEL2IPDestPrefixINI Name:SOURCENUMBERMAPTEL2IP_DESTINATIONPREFIXProfile name: Not Profiled

Source Prefix StringUp to 100

chars.

InstantMib name: srcTEL2IPPrefixINI Name:SOURCENUMBERMAPTEL2IP_SOURCEPREFIXProfile name: Not Profiled

StrippedDigits From

Left

Integer0-211

Instant 0 Num of stripped digits, Remove from left.Mib name: srcTEL2IPNumOfStrippedDigitsINI Name:SOURCENUMBERMAPTEL2IP_REMOVEFROMLEFTProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

StrippedDigits From

Right

Integer0-211

Instant 0 Num Of digits To Remove from Right.Mib name:srcTEL2IPNumOfDigitsToRemFromRight

INI Name:SOURCENUMBERMAPTEL2IP_REMOVEFROMRIGHTProfile name: Not Profiled

Prefix ToAdd


Instant Prefix to AddMib name: srcTEL2IPPrefixToAddINI Name:SOURCENUMBERMAPTEL2IP_PREFIX2ADDProfile name: Not Profiled

Suffix To Add StringUp to 49

chars.

Instant Suffix To AddMib name: srcTEL2IPSuffix2Add

INI Name:SOURCENUMBERMAPTEL2IP_SUFFIX2ADDProfile name: Not Profiled

Number OfDigits To

Leave

Integer0-255

Instant 0 Number of digits to leaveMib name: srcTEL2IPNumOfDigitsToLeaveINI Name:SOURCENUMBERMAPTEL2IP_LEAVEFROMRIGHTProfile name: Not Profiled

Presentation Enum:NotBlocke

d(0),

Blocked(1),NotConfigured(255)

Instant 255 PresentationMib name: srcTEL2IPPresentationINI Name:

SOURCENUMBERMAPTEL2IP_ISPRESENTATIONRESTRICTEDProfile name: Not Profiled



Instant "*" Source AddressMib name: srcTEL2IPSourceIPAddressINI Name:SOURCENUMBERMAPTEL2IP_SOURCEADDRESSProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.19.6 Tab: Phone Context

Frame: SIP Manipu lations , Tab: Phone Context

ParameterName


DefaultValue

Description

Index Integer0-19

NA 0 Entry number, starting at 0.Mib name: phoneContextIndexINI Name: PHONECONTEXT_INDEXProfile name: Not Profiled



CreateAndGo(4),


Instant 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: phoneContextRowStatusProfile name: Not Profiled

NPI Enum:NotConfigured(-1),

Unknown(0),E164Public(1),

Private(9)

Instant -1 Number PlanMib name: phoneContextNPIINI Name: PHONECONTEXT_NPIProfile name: Not Profiled

TON Enum:NotConfigured(-1),

Unknown(0),International-

Level2Regional(1),National-

Level1Regional(2),NetworkSpecific-NetworkPISN(3),

Subscriber-Level0Regional(4),

Abbreviated(6)

Instant -1 Number TypeMib name: phoneContextTONINI Name: PHONECONTEXT_TONProfile name: Not Profiled

PhoneContext


Instant Phone-ContextMib name: phoneContextPhoneContextINI Name: PHONECONTEXT_CONTEXTProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.19.7 Tab: Redirect Number Map Ip to Tel

Frame: SIP Manipulations, Tab: Redirect Number Map Ip to Tel

ParameterName


DefaultValue

Description

Index Integer0-19

NA 0 Entry number, starting at 0.Mib name: redirectNumberMapIp2TelIndexINI Name: REDIRECTNUMBERMAPIP2TEL_INDEXProfile name: Not Profiled


NotInService(2),

NotReady(

3),CreateAnd

Go(4),CreateAnd

Wait(5),Destroy(6)

Instant 3 Row-Status Textual Conventions as defined in RFC2579: Textual Conventions for SMIv2Mib name: redirectNumberMapIp2TelRowStatusProfile name: Not Profiled

DestinationPrefix

StringUp to 100

chars.

InstantMib name:redirectNumberMapIp2TelDestinationPrefixINI Name:REDIRECTNUMBERMAPIP2TEL_DESTINATIONPREFIX

Profile name: Not ProfiledRedirect

PrefixString

Up to 100chars.

InstantMib name: redirectNumberMapIp2TelRedirectPrefixINI Name:REDIRECTNUMBERMAPIP2TEL_REDIRECTPREFIXProfile name: Not Profiled

SourceAddress


InstantMib name: redirectNumberMapIp2TelSourceAddressINI Name:REDIRECTNUMBERMAPIP2TEL_SOURCEADDRESS


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

NumberType

Enum:NotConfigured(255),

Unknown(0),

International(1),

National(2),NetworkSp

ecific(3),Subscriber(

4),Abbreviate

d(6)

Instant 0Mib name: redirectNumberMapIp2TelNumberTypeINI Name:

REDIRECTNUMBERMAPIP2TEL_NUMBERTYPEProfile name: Not Profiled

Number

Plan

Enum:

NotConfigured(255),

Unknown(0),

E164Public(1),

Private(9)

Instant 0

Mib name: redirectNumberMapIp2TelNumberPlanINI Name:REDIRECTNUMBERMAPIP2TEL_NUMBERPLANProfile name: Not Profiled

RemoveFrom Left

Integer0-211

Instant 0Mib name:redirectNumberMapIp2TelRemoveFromLeftINI Name:REDIRECTNUMBERMAPIP2TEL_REMOVEFROML

EFTProfile name: Not Profiled

RemoveFrom Right

Integer0-211

Instant 0Mib name:redirectNumberMapIp2TelRemoveFromRightINI Name:REDIRECTNUMBERMAPIP2TEL_REMOVEFROMRIGHTProfile name: Not Profiled

LeaveFrom Right

Integer0-

214748364

7

Instant 0Mib name:redirectNumberMapIp2TelLeaveFromRight

INI Name:REDIRECTNUMBERMAPIP2TEL_LEAVEFROMRIGHTProfile name: Not Profiled

Prefix ToAdd


InstantMib name: redirectNumberMapIp2TelPrefixToAddINI Name:REDIRECTNUMBERMAPIP2TEL_PREFIX2ADDProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Suffix ToAdd


InstantMib name: redirectNumberMapIp2TelSuffixToAddINI Name:

REDIRECTNUMBERMAPIP2TEL_SUFFIX2ADDProfile name: Not Profiled

IsPresentatio

nRestricted

Enum:NotConfigured(255),

Allowed(0),Restricted(

1)

Instant 0Mib name:redirectNumberMapIp2TelIsPresentationRestrictedINI Name:REDIRECTNUMBERMAPIP2TEL_ISPRESENTATIONRESTRICTEDProfile name: Not Profiled

SourceTrunk

Group ID

Integer-1-99

Instant -1Mib name:

redirectNumberMapIp2TelSrcTrunkGroupIDINI Name:REDIRECTNUMBERMAPIP2TEL_SRCTRUNKGROUPIDProfile name: Not Profiled

Source IPGroup ID

Integer-1-9

Instant -1Mib name: redirectNumberMapIp2TelSrcIPGroupIDINI Name:REDIRECTNUMBERMAPIP2TEL_SRCIPGROUPIDProfile name: Not Profiled

2.19.8 Tab: Redirect Number Map Tel to IP

Frame: SIP Manipulations, Tab: Redirect Number Map Tel to Ip

ParameterName


DefaultValue

Description

Index Integer0-19

NA 0 Entry number, starting at 0.Mib name: redirectNumberMapTel2IpIndexINI Name: REDIRECTNUMBERMAPTEL2IP_INDEXProfile name: Not Profiled

Status Enum:

Active(1),NotInServic

e(2),NotReady(3

),CreateAndG

o(4),CreateAnd

Wait(5),Destroy(6)

Instant 3 Row-Status Textual Conventions as defined in RFC

2579: Textual Conventions for SMIv2Mib name: redirectNumberMapTel2IpRowStatusProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Destination Prefix

StringUp to 100

chars.

InstantMib name:redirectNumberMapTel2IpDestinationPrefix

INI Name:REDIRECTNUMBERMAPTEL2IP_DESTINATIONPREFIXProfile name: Not Profiled

RedirectPrefix

StringUp to 100

chars.

InstantMib name: redirectNumberMapTel2IpRedirectPrefixINI Name:REDIRECTNUMBERMAPTEL2IP_REDIRECTPREFIXProfile name: Not Profiled

Source

Address

String

Up to 70chars.

Instant

Mib name: redirectNumberMapTel2IpSourceAddressINI Name:REDIRECTNUMBERMAPTEL2IP_SOURCEADDRESSProfile name: Not Profiled

NumberType

Integer0-

2147483647

Instant 0Mib name: redirectNumberMapTel2IpNumberTypeINI Name:REDIRECTNUMBERMAPTEL2IP_NUMBERTYPEProfile name: Not Profiled

NumberPlan

Integer0-

2147483647

Instant 0Mib name: redirectNumberMapTel2IpNumberPlan

INI Name:REDIRECTNUMBERMAPTEL2IP_NUMBERPLANProfile name: Not Profiled

RemoveFrom Left

Integer0-211

Instant 0Mib name:redirectNumberMapTel2IpRemoveFromLeftINI Name:REDIRECTNUMBERMAPTEL2IP_REMOVEFROMLEFTProfile name: Not Profiled

RemoveFrom

Right

Integer0-211

Instant 0Mib name:

redirectNumberMapTel2IpRemoveFromRightINI Name:REDIRECTNUMBERMAPTEL2IP_REMOVEFROMRIGHTProfile name: Not Profiled

LeaveFromRight

Integer0-

2147483647

Instant 0Mib name:redirectNumberMapTel2IpLeaveFromRightINI Name:REDIRECTNUMBERMAPTEL2IP_LEAVEFROMRIGHTProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Prefix ToAdd


InstantMib name: redirectNumberMapTel2IpPrefixToAddINI Name:

REDIRECTNUMBERMAPTEL2IP_PREFIX2ADDProfile name: Not Profiled

Suffix ToAdd


InstantMib name: redirectNumberMapTel2IpSuffixToAddINI Name:REDIRECTNUMBERMAPTEL2IP_SUFFIX2ADDProfile name: Not Profiled

IsPresentati

onRestricted

Enum:NotConfigur

ed(255),Allowed(0),

Restricted(1)

Instant 0Mib name:redirectNumberMapTel2IpIsPresentationRestrictedINI Name:

REDIRECTNUMBERMAPTEL2IP_ISPRESENTATIONRESTRICTEDProfile name: Not Profiled

SourceTrunk

Group ID

Integer-1-99

Instant -1Mib name:redirectNumberMapTel2IpSrcTrunkGroupIDINI Name:REDIRECTNUMBERMAPTEL2IP_SRCTRUNKGROUPIDProfile name: Not Profiled

Source IPGroup ID

Integer-1-9

Instant -1Mib name: redirectNumberMapTel2IpSrcIPGroupID

INI Name:REDIRECTNUMBERMAPTEL2IP_SRCIPGROUPIDProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.20 Frame: SIP Networking

2.20.1 Tab: SRD Table

Frame: SIP Networking, Tab: SRD Table

ParameterName


DefaultValue

Description

Index Integer0-31

Read-Only 0Mib name: srdIndexINI Name: SRD_INDEXProfile name: SIP SRD Profile

Row Status Enum:

Active(1),NotInService(2),NotReady(3),


Destroy(6)

NA 3 Row-Status Textual Conventions as

defined in RFC 2579: Textual Conventionsfor SMIv2Mib name: srdRowStatusProfile name: SIP SRD Profile


Instant GwApp Signaling Routing Domain name.Mib name: srdNameINI Name: SRD_NAMEProfile name: SIP SRD Profile

Media Realm StringUp to 39 chars.

Instant GwApp Signaling Routing Domain mediarealm.

Mib name: srdMediaRealmINI Name: SRD_MEDIAREALMProfile name: SIP SRD Profile

Intra SRDMedia

Anchoring

Enum:anchorMedia(0),

DontAnchorMedia(1)

Instant 0 Internal SRD Media AnchoringMib name: srdIntraSRDMediaAnchoringINI Name:SRD_INTRASRDMEDIAANCHORINGProfile name: SIP SRD Profile

BlockUnRegistered

Users

Enum:no(0), yes(1)

Instant 0 Block Calls From Unregistered UserMib name: srdBlockUnRegUsersINI Name: SRD_BLOCKUNREGUSERSProfile name: SIP SRD Profile

Max NumberOf

RegisteredUsers

Integer-1-3000

Instant -1 Max Number Of Registered Users.MP1xx - 25M1K - 200M2K- 250M3K - 3000Mib name: srdMaxNumOfRegUsersINI Name: SRD_MAXNUMOFREGUSERSProfile name: SIP SRD Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.20.2 Tab: SIP Interfaces

Frame: SIP Networking, Tab: SIP Interfaces

ParameterName


DefaultValue

Description

Index Integer0-31

Read-Only 0Mib name: sipInterfaceIndexINI Name: SIPINTERFACE_INDEXProfile name: SIP Interface Profile

Row Status Enum:Active(1),



Destroy(6)

NA 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: sipInterfaceRowStatusProfile name: SIP Interface Profile

NetworkInterface


Instant Network Interface.Mib name: sipInterfaceNetworkInterfaceINI Name:SIPINTERFACE_NETWORKINTERFACEProfile name: SIP Interface Profile

ApplicationType

Enum:gwIP2IP(0),

sas(1), sbc(2)

Instant 0 Application Type.Mib name: sipInterfaceApplicationTypeINI Name:SIPINTERFACE_APPLICATIONTYPEProfile name: SIP Interface Profile

UDP Port Integer1-65534 Instant 5060 UDP Port number.Mib name: sipInterfaceUDPPortINI Name: SIPINTERFACE_UDPPORTProfile name: SIP Interface Profile

TCP Port Integer1-65534

Instant 5060 TCP Port number.Mib name: sipInterfaceTCPPortINI Name: SIPINTERFACE_TCPPORTProfile name: SIP Interface Profile

TLS Port Integer1-65534

Instant 5061 TLS Port number.Mib name: sipInterfaceTLSPortINI Name: SIPINTERFACE_TLSPORTProfile name: SIP Interface Profile

SRD Integer0-31

Instant 0Mib name: sipInterfaceSRDINI Name: SIPINTERFACE_SRDProfile name: SIP Interface Profile

7/23/2019 LTRT-32105 Mediant 3000




2.21 Frame: SIP Protocol Definitions

2.21.1 Tab: General Info

Frame: SIP Protocol Definitions , Tab: General Info

ParameterName


DefaultValue

Descript ion

GatewayName


Instant Gateway nameMib name:sipMiscGatewayNameINI Name:SIPGATEWAYNAMEProfile name: Not Profiled

CASConfiguration

Enable


Offline 0 This parameter enables ordisables the possibility CASprotocol configuration. AtTP6310 When this parameteris enable the conference willdisabled in case it's relevant. 0 = Disable1 = EnableMib name:acCasConfigEnableINI Name:CASPROTOCOLENABLE

Profile name: IPv6 Digital SIPProtocol Definitions

Sip SessionExpires

Integer0-1999999

Instant 0 The SIP session will berefreshed (using INVITE)each time this timer expires(seconds)Mib name:sipMiscSipSessionExpiresINI Name:SIPSESSIONEXPIRESProfile name: Digital SIPProtocol Definitions

Enable EarlyMedia Enum:No(0), Yes(1) Instant 0 Enable Early MediaMib name:sipMiscEnableEarlyMediaINI Name:ENABLEEARLYMEDIAProfile name: Digital SIPProtocol Definitions

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Descript ion

ChannelSelection

Mode

Enum:ByDestPhoneNumber(0),

CyclicAscending(1),

AscendingAlways(2),CyclicDescending(3),DescendingAlways(4),

ByDestinationPhoneNumberCyclicAscending(5),

BySourcePhoneNumber(6),TrunkCyclicAscending(7),

TrunkAndChannelCyclicAscending(8), RingToHuntGroup(9),

SelectTrunkBySuppelmentaryServicesTable(10)

Instant 0 Default method to use fortrunk B-channel allocation (IPto Tel calls)

Mib name:channelsSettingSelectModeINI Name:CHANNELSELECTMODEProfile name: Digital SIPProtocol Definitions

Fax Used Enum:

NoFax(0), t38(1), g711(2),fallBack(3)

Instant 0 Enable T.38 Fax signaling

Mib name: miscIsFaxUsedINI Name: ISFAXUSEDProfile name: Digital SIPProtocol Definitions

SessionExpiresMethod

Enum:invite(0), update(1)

Instant 0 Determines the Method whichthe SIP session will be usingto referesh the session.Mib name:sipMiscSessionExpiresMethodINI Name:SESSIONEXPIRESMETHOD

Profile name: Digital SIPProtocol Definitions

MinimalSession

Refresh Value

Integer10-100000

Instant 90 Minimal value for sessionrefreshMib name: sipMiscMinSEINI Name: MINSEProfile name: Digital SIPProtocol Definitions

Use SIP URIFor Diversion

Header

Enum:tel(0), sip(1)

Instant 0 Use Tel uri or Sip uri forDiversion headerMib name:sipMiscUseSIPURIForDiversi

onHeaderINI Name:USESIPURIFORDIVERSIONHEADERProfile name: Digital SIPProtocol Definitions

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Descript ion

ForkingHandling

Mode

Enum:Sequential(0), Parallel(1)

Instant 0 Decides the handling methodto 18X response to forking0 - Parallel handling - only the

first 18X response is handled1 - Sequential handling - allthe 18X responses arehandledMib name:sipMiscForkingHandlingModeINI Name:FORKINGHANDLINGMODEProfile name: Digital SIPProtocol Definitions

OfferUnencrypted

SR TCP


Instant 0 If set to 1, the 'crypto' attributeincludes the

UNENCRYPTED_SRTCPparameter. If set to 1, theUNENCRYPTED_SRTCPparameter is not included.Mib name:sipMiscOfferUnencryptedSRTCPINI Name:OFFERUNENCRYPTEDSRTCPProfile name: Digital SIPProtocol Definitions

SourceNumberPreference

StringUp to 10 chars. Instant "" Determines from where thesource number shall be takenfrom (in an incoming INVITErequest).Parameter values:- NULL: no changes in currentlogic- FROM: source number istaken from 'FROM' fieldMib name:sipMiscSourceNumberPreferenceINI Name:

SOURCENUMBERPREFERENCEProfile name: Digital SIPProtocol Definitions

IPv6

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Descript ion

Media IPVersion

Preference

Enum:onlyIPv4(0), onlyIPv6(1),

preferIPv4(2), preferIPv6(3)

Instant 0 Select the preferred Media IPversion.Mib name:

gwIPv6MediaIPVersionPrefer enceINI Name:MEDIAIPVERSIONPREFERENCEProfile name: IPv6 Digital SIPProtocol Definitions

2.21.2 Tab: Proxy Server

Frame: SIP Protocol Definitions , Tab: Proxy Server

ParameterName


DefaultValue

Description

Index Integer0-159

NA 0 Entry number, starting at 0.Mib name: proxyIPIndexINI Name: PROXYIP_INDEXProfile name: Not Profiled

Proxy Used Enum:No(0), Yes(1)

Instant 0 Is SIP Proxy usedMib name: sipProxyUsedINI Name: ISPROXYUSEDProfile name: Digital SIP Protocol Definitions




Destroy(6)

Instant 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: proxyIPRowStatusProfile name: Digital SIP Proxy ServerProfile

Proxy Name StringUp to 49 chars.

Instant SIP Proxy nameMib name: sipProxyNameINI Name: PROXYNAMEProfile name: Digital SIP Protocol Definitions

Proxy IP StringUp to 49 chars.

Instant IpAddressMib name: proxyIPProxyIPINI Name: PROXYIP_IPADDRESSProfile name: Digital SIP Proxy ServerProfile

Enable ProxyKeep Alive

Enum:Disable (0),

UsingOptions (1),UsingRegister (2)

Instant 0 Enable Proxy Keep-Alive over OPTIONSmethod or REGISTER methodMib name: sipProxyEnableKeepAliveINI Name: ENABLEPROXYKEEPALIVEProfile name: Digital SIP Protocol Definitions

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

TransportType

Enum:unknown(-1),

UDP(0), TCP(1),

TLS(2)

Instant -1 TransportTypeMib name: proxyIPTransportTypeINI Name: PROXYIP_TRANSPORTTYPE

Profile name: Digital SIP Proxy ServerProfile

Keep AliveTime

Integer5-2000000

Instant 60 Time interval between Proxy Keep-Alivemessages (seconds)Mib name: sipProxyKeepAliveTimeINI Name: PROXYKEEPALIVETIMEProfile name: Digital SIP Protocol Definitions

Proxy Set Id Integer0-31

Instant 0 ProxySetIdMib name: proxyIPProxySetIdINI Name: PROXYIP_PROXYSETIDProfile name: Digital SIP Proxy Server

ProfileProxy

RedundancyMode

Enum:Parking(0),Homing(1)

Instant 0 Redundancy Mode - Parking on active proxyor switching to main Proxy whenever onlineMib name: sipProxyRedundancyModeINI Name: PROXYREDUNDANCYMODEProfile name: Digital SIP Protocol Definitions

Is Proxy HotSwap

Enum:No(0), Yes(1)

Instant 0 Enable Proxy Hot-Swap modeMib name: sipProxyIsHotSwapINI Name: ISPROXYHOTSWAPProfile name: Digital SIP Protocol Definitions

Proxy HotSwap Rtx

Integer1-30

Instant 3 Number of Rtx before Hotswap is performedMib name: sipProxyHotSwapRtxINI Name: PROXYHOTSWAPRTXProfile name: Digital SIP Protocol Definitions

Always UseProxy

Enum:No(0), Yes(1)

Instant 0 Send all messages to Proxy serverMib name: sipProxyAlwaysSendToProxyINI Name: ALWAYSSENDTOPROXYProfile name: Digital SIP Protocol Definitions

SIP Re-Routing Mode

Enum:standardMode(0),

sendInviteToProxy(1),

useRoutingTable(2)

Instant 0 Defines the routing mode after receiving 3xxresponse or transfer0 - standard mode1 - send invite to proxy2 - use routing table

Mib name:manipulationAndRoutingSIPReRoutingModeINI Name: SIPREROUTINGMODEProfile name: Digital SIP Protocol Definitions

Fallback Used Enum:No(0), Yes(1)

Instant 0 Allow fallback to internal Tel to IP routingtable if Proxy is not respondingMib name: sipProxyIsFallbackUsedINI Name: ISFALLBACKUSEDProfile name: Digital SIP Protocol Definitions

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Use RoutingTable For

Host Names

Enum:No(0), Yes(1)

Instant 0 Always use routing table even though proxyis availableMib name: sipProxyAlwaysUseRouteTable

INI Name: ALWAYSUSEROUTETABLEProfile name: Digital SIP Protocol Definitions

Use GatewayName ForOptions


Instant 0 Use Gateway name (instead of IP address)in Keep-Alive OPTIONS messagesMib name:sipProxyUseGatewayNameForOptionsINI Name:USEGATEWAYNAMEFOROPTIONSProfile name: Digital SIP Protocol Definitions

LoadBalancing

Method

Enum:Disable(0),

RoundRobin(1),RandomWeights(2)

Instant 0 Method of the proxies load balancing:0 - Disabled (default)

1 - RoundRobin2 - Random SRV WeightsMib name: sipProxyLoadBalancingMethodINI Name:PROXYLOADBALANCINGMETHODProfile name: Digital SIP Protocol Definitions

IP ListRefresh Time

Integer5-2000000

Instant 60 Time interval between refresh of proxies list(seconds). For example SRV query will bedone every ProxyIPListRefreshTimesecondsMib name: sipProxyIPListRefreshTimeINI Name: PROXYIPLISTREFRESHTIMEProfile name: Digital SIP Protocol Definitions

Ping PongKeep Alive


Instant 0 Use Ping-Pong for Keep-Alive to proxy viareliable connectionMib name: miscPingPongKeepAliveINI Name: USEPINGPONGKEEPALIVEProfile name: Digital SIP Protocol Definitions

Ping PongKeep Alive

Time

Integer5-2000000

Instant 120 The Ping Keep-Alivewill be sent (usingCRLFCRLF) each time this timer expires(seconds)Mib name: miscPingPongKeepAliveTimeINI Name: PINGPONGKEEPALIVETIMEProfile name: Digital SIP Protocol Definitions

H323 GKRegister


Instant 0 This parameter related toRegister/UnRegister buttonsMib name: miscH323GKRegisterINI Name: SHOULDREGISTERProfile name: Digital SIP Protocol Definitions

7/23/2019 LTRT-32105 Mediant 3000




2.21.3 Tab: Proxy Set

Frame: SIP Protocol Definitions , Tab: Proxy Set

Parameter Name Type Provis ioningType

DefaultValue

Description

Index Integer1-32

NA 1Mib name: sipProxySetIndexINI Name: PROXYSET_INDEXProfile name: Not Profiled


NotInService(2),

NotReady(3),

CreateAndGo(4),

CreateAndWait(5),

Destroy(6)

Instant 3 Row-Status Textual Conventions asdefined in RFC 2579: Textual Conventionsfor SMIv2Mib name: sipProxySetRowStatusProfile name: Not Profiled

Enable ProxyKeep Alive

Enum:Disable(0),

UsingOptions(1),

UsingRegister(2)

Instant 0 GwApp Proxy Set TableMib name:sipProxySetEnableProxyKeepAliveINI Name:PROXYSET_ENABLEPROXYKEEPALIVEProfile name: Not Profiled

ProxyKeepAliveTime

Integer5-2000000

Instant 5 GwApp Proxy Set TableMib name:sipProxySetProxyKeepAliveTimeINI Name:PROXYSET_PROXYKEEPALIVETIMEProfile name: Not Profiled

Proxy LoadBalancing Method

Enum:Disable (0),

RoundRobin(1),

RandomWeights(2)

Instant 0 GwApp Proxy Set TableMib name:sipProxySetProxyLoadBalancingMethodINI Name:PROXYSET_PROXYLOADBALANCINGMETHODProfile name: Not Profiled

Is Proxy Hot Swap Enum:Disable(0),Enable(1)

Instant 0 GwApp Proxy Set TableMib name: sipProxySetIsProxyHotSwapINI Name:PROXYSET_ISPROXYHOTSWAPProfile name: Not Profiled

ProxyRedundancy

Mode

Enum:NotConfigure

d(-1),Parking(0),Homing(1)

Online -1 GwApp Proxy Set TableMib name:sipProxySetProxyRedundancyModeINI Name:PROXYSET_PROXYREDUNDANCYMODEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.21.4 Tab: Registration

Frame: SIP Protocol Definitions , Tab: Registration

ParameterName


DefaultValue

Description

Is RegisterNeeded

Enum:No(0), Yes(1)

Instant 0 Is Proxy registration necessaryMib name: sipRegistrationIsNeededINI Name: ISREGISTERNEEDEDProfile name: Digital SIP Protocol Definitions

Registrar IP StringUp to 49 chars.

Instant SIP Registrar IP addressMib name: sipRegistrationIPINI Name: REGISTRARIPProfile name: Digital SIP Protocol Definitions

RegistrationTime

Integer10-2000000

Instant 180 Time for which registration toGatekeeper/Proxy is valid. Causes periodicregistration (seconds)Mib name: sipRegistrationTimeINI Name: REGISTRATIONTIMEProfile name: Digital SIP Protocol Definitions

RegistrationRetry Time

Integer10-2000000

Instant 10 Time in which the gateway will try to registerafter last registration failure (seconds)Mib name:sipRegistrationRegistrationRetryTimeINI Name: REGISTRATIONRETRYTIMEProfile name: Digital SIP Protocol Definitions

Registrar

Name

String

Up to 49 chars.

Instant SIP Registrar name

Mib name: sipRegistrationRegistrarNameINI Name: REGISTRARNAMEProfile name: Not Profiled

Time Divider Integer30-100

Instant 50 Percentage of RegistrationTime when theactual new REGISTER request will be sent outMib name: sipRegistrationTimeDividerINI Name: REGISTRATIONTIMEDIVIDERProfile name: Digital SIP Protocol Definitions


Instant Gateway registration nameMib name: sipRegistrationNameINI Name: GWREGISTRATIONNAMEProfile name: Digital SIP Protocol Definitions

Register OnInvite Failure


Instant 0 Enable ReRegister upon INVITE transactionfailureMib name:sipRegistrationRegisterOnInviteFailureINI Name: REGISTERONINVITEFAILUREProfile name: Digital SIP Protocol Definitions

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

TimeThreshold

Integer0-2000000

Instant 0 If (REGISTRATIONTIMETHRESHOLD > 0)and (REGISTRATIONTIMETHRESHOLD <computed registration time using existing logic)

then new registration time will be (Registrationtime from expires header ?REGISTRATIONTIMETHRESHOLD)Mib name: sipRegistrationTimeThresholdINI Name: REGISTRATIONTIMETHRESHOLDProfile name: Digital SIP Protocol Definitions

RegistrarTransport

Type

Enum:NotConfigured(-

1), UDP(0),TCP(1), TLS(2)

Instant -1 Registrar transport typeMib name:sipRegistrationRegistrarTransportTypeINI Name: REGISTRARTRANSPORTTYPEProfile name: Digital SIP Protocol Definitions

Re RegisterOnConnection

Failure


Instant 0 Enables GW to perform Re-Registeration onTCP/TLS connection failureMib name:sipRegistrationReRegisterOnConnectionFailureINI Name:REREGISTERONCONNECTIONFAILUREProfile name: Digital SIP Protocol Definitions

2.21.5 Tab: Coders Group 0

Frame: SIP Protocol Definitions , Tab: Coders Group 0

ParameterName


DefaultValue

Description

Index Integer0-9

NA 0 Index Field for line.Mib name: codersGroup0IndexINI Name: CODERSGROUP0_INDEXProfile name: Not Profiled

Status Enum: NA 0 ROWSTATUS field for line.Mib name: codersGroup0RowStatusProfile name: Digital SIP Coders Group0Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description


g711Alaw64k(1),

g711Ulaw64k(2),g729(3), g726(5),

g726r16(6),g726r24(7),g726r32(8),g726r40(9),








Instant 0 Coders Group name.Mib name: codersGroup0NameINI Name: CODERSGROUP0_NAMEProfile name: Digital SIP Coders Group0Profile

PacketizationTime

Integer0-4294967295

Instant 0 Coders Group packetization time.Mib name:codersGroup0PacketizationTimeINI Name: CODERSGROUP0_PTIMEProfile name: Digital SIP Coders Group0Profile

Rate Integer0-64000

Instant 0 Coders Group rate.Mib name: codersGroup0RateINI Name: CODERSGROUP0_RATE

Profile name: Digital SIP Coders Group0Profile

PayloadType

Integer-1-127

Instant -1 Coders Group payload type.Mib name: codersGroup0PayloadTypeINI Name:CODERSGROUP0_PAYLOADTYPEProfile name: Digital SIP Coders Group0Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

SilenceSuppression



Instant 0 Coders Group silence suppression.Mib name:codersGroup0SilenceSuppression

INI Name: CODERSGROUP0_SCEProfile name: Digital SIP Coders Group0Profile

2.21.6 Tab: DTMF

Frame: SIP Protocol Definit ions , Tab: DTMF

ParameterName


DefaultValue

Descripti on

Index Integer0-4

NA 0 Entry number, starting at 0.Mib name: sipTxDTMFOptionIndexINI Name: TXDTMFOPTION_INDEXProfile name: Not Profiled

Rx DTMFOption

Enum:noSupportRFC2833inSDP(0),

supportRFC2833inSDP(3)

Instant 0 Declare support for RFC 2833 in SDPMib name: sipDTMFRxDTMFOptionINI Name: RXDTMFOPTIONProfile name: Digital SIP ProtocolDefinitions

Status Enum:Active(1), NotInService(2),

NotReady(3),CreateAndGo(4),CreateAndWait(5), Destroy(6)

Instant 3 Row-Status Textual Conventions asdefined in RFC 2579: Textual

Conventions for SMIv2Mib name:sipTxDTMFOptionRowStatusProfile name: Not Profiled

HookFlashOption

Enum:NotSupported(0), INFO(1),RFC2833(4), infoLucent(5)

Instant 0 Detect and send Hook-Flash using theselected methodMib name: sipDTMFHookFlashOptionINI Name: HOOKFLASHOPTIONProfile name: Digital SIP ProtocolDefinitions

Tx DTMFOption

Enum:NotSupported(0),

NortelINFO(1), NOTIFY(2),CiscoINFO(3), RFC2833(4),

KoreaTelecomINFO(5)

Instant 0 Transmit DTMF optionMib name: sipTxDTMFOptionValue

INI Name: TXDTMFOPTION_TYPEProfile name: Not Profiled

Digit MapPatterns


Offline The digit map patterns separated by avertical bar (|), as defined in theMEGACO RFC.

Range = String[500]Mib name: acCPDigitMapPatternsINI Name: DIGITMAPPINGProfile name: Digital SIP ProtocolDefinitions

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Descripti on

Use DigitFor

Special

DTMF

Enum:Special(0), Numeric(1)

Instant 0 Indicates whether a special DTMF,sent with INFO(Cisco), is sent usingits digit representation or not.

Mib name:sipDTMFUseDigitForSpecialDTMFINI Name:USEDIGITFORSPECIALDTMFProfile name: Digital SIP ProtocolDefinitions

MinRoutingOverlapDigits

Integer0-49

Instant 1 Minimum number of overlap digitsbefore routingMib name:sipDTMFMinRoutingOverlapDigitsINI Name:MINOVERLAPDIGITSFORROUTING

Profile name: Digital SIP ProtocolDefinitions

ISDNOverlap IP

to TelDialing


Instant 0 Enable ISDN Overlap IP to Tel DialingMib name:sipDTMFISDNOverlapIPtoTelDialingINI Name: ISDNTXOVERLAPProfile name: Digital SIP ProtocolDefinitions

2.21.7 Tab: Sup Services

Frame: SIP Protocol Definitions , Tab: Sup Services

ParameterName


DefaultValue

Description

EnableHold

Enum:No(0), Yes(1)

Instant 1 Enable Call Hold serviceMib name: supServicesEnableHoldINI Name: ENABLEHOLDProfile name: Digital SIP ProtocolDefinitions

HoldFormat

Enum:connectionIP(0),

sDPattributesSendonly(1)

Instant 0 Call Hold format - Zero IP or 'sendonly'SDP attributeMib name: supServicesHoldFormatINI Name: HOLDFORMATProfile name: Digital SIP ProtocolDefinitions

Name ID Enum:Disable(0), Enable(1)

Instant 0 Enable Name Identification serviceMib name: supServicesNameIDINI Name:ENABLENAMEIDENTIFICATIONProfile name: Digital SIP ProtocolDefinitions

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

SendMeteringMessage

To IP


Instant 0 Send metering messages to IP ondetection of analog metering pulsesMib name:

supServicesSendMeteringMessageToIPINI Name: SENDMETERING2IPProfile name: Digital SIP ProtocolDefinitions

HeldTimeout

Integer-1-2400

Instant -1 Maximum time allowed for call to beretreived from IP (seconds)Mib name: supServicesHeldTimeoutINI Name: HELDTIMEOUTProfile name: Digital SIP ProtocolDefinitions

Hook Flash

Code

String

Up to 25 chars.

Instant If this code received during session, act

as if hook flash received from the TELside.This parameter can use DIGIT MAPsyntaxMib name: supServicesHookFlashCodeINI Name: HOOKFLASHCODEProfile name: Digital SIP ProtocolDefinitions

BlindTransfer

DisconnectTimeout

Integer0-1000000

Instant 0 Maximum time (milliseconds) to wait fordisconnect from tel before performingblind transferMib name:supServicesBlindTransferDisconnectTime

outINI Name:BLINDTRANSFERDISCONNECTTIMEOUTProfile name: Digital SIP ProtocolDefinitions

EnableTransfer

Enum:No(0), Yes(1)

Instant 1 Enable Call Transfer serviceMib name: transferEnableINI Name: ENABLETRANSFERProfile name: Digital SIP ProtocolDefinitions

LogicalPrefix For

TransferredCall


Instant Prefix added to the called number of atransferred callMib name: transferXferPrefixINI Name: XFERPREFIXProfile name: Digital SIP ProtocolDefinitions

Enable CallWaiting

Enum:No(0), Yes(1)

Instant 1 Enable Call Waiting serviceMib name: callWaitingEnableINI Name: ENABLECALLWAITINGProfile name: Digital SIP ProtocolDefinitions

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

EnableNRT

Subscriptio

n


Instant 0 Enable subscription for Call forwardringtone Indicator serviceMib name: miscEnableNRTSubscription

INI Name: ENABLENRTSUBSCRIPTIONProfile name: Digital SIP ProtocolDefinitions

ASSubscribe

IP Group ID

Integer-1-65525

Instant -1 IPGroup ID for AS server subscribepurposesMib name: miscASSubscribeIPGroupIDINI Name: ASSUBSCRIBEIPGROUPIDProfile name: Digital SIP ProtocolDefinitions

NRTSubscriptio

n RetryTime

Integer0-2000000

Instant 120 NRT service subscription retry time afterlast subscription failure (in seconds)

Mib name:miscNRTSubscriptionRetryTimeINI Name: NRTSUBSCRIBERETRYTIMEProfile name: Digital SIP ProtocolDefinitions

CallForward

Ring ToneID

Integer1-65525

Instant 1 Ringtone type for Call forward notificationMib name: miscCallForwardRingToneIDINI Name: CALLFORWARDRINGTONEIDProfile name: Digital SIP ProtocolDefinitions

MWI

MWIEnable


Instant 0 Enable MWI support (Message WaitingIndicator)Mib name: mWIEnableINI Name: ENABLEMWIProfile name: Digital SIP ProtocolDefinitions

MWIAnalogLamp


Instant 0 Enable MWI support using an analoglamp (110 Volt)Mib name: mWIAnalogLampINI Name: MWIANALOGLAMPProfile name: Digital SIP ProtocolDefinitions

MWIDisplay Enum:Disable(0), Enable(1) Instant 0 Enable MWI support using Caller IDinterfaceMib name: mWIDisplayINI Name: MWIDISPLAYProfile name: Digital SIP ProtocolDefinitions

MWI ServerIP


Instant MWI server IP addressMib name: mWIServerIPINI Name: MWISERVERIPProfile name: Digital SIP ProtocolDefinitions

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

MWIExpiration

Time

Integer10-2000000

Instant 7200 MWI service subscription expiration time(seconds)Mib name: mWIExpirationTime

INI Name: MWIEXPIRATIONTIMEProfile name: Digital SIP ProtocolDefinitions

MWI ServerTransport

Type

Enum:NotConfigured(-1),UDP(0), TCP(1),

TLS(2)

Instant -1 MWI server transport typeMib name: mWIServerTransportTypeINI Name:MWISERVERTRANSPORTTYPEProfile name: Digital SIP ProtocolDefinitions

EnableMWI

Subscription


Instant 0 Enable subscription for Message WaitingIndicator service

Mib name:sipSubscribeEnableMWISubscriptionINI Name: ENABLEMWISUBSCRIPTIONProfile name: Digital SIP ProtocolDefinitions

Retry Time Integer10-2000000

Instant 120 MWI service subscription retry time afterlast subscription failure (seconds)Mib name: sipSubscribeRetryTimeINI Name: SUBSCRIBERETRYTIMEProfile name: Digital SIP ProtocolDefinitions

2.21.8 Tab: Authentication And Security

Frame: SIP Protocol Definitions , Tab: Authentication And Security

ParameterName


DefaultValue

Description

Authentication

Authentication Mode

Enum:PerEP(0), PerGW(1),

PerFXSOnly(3)

Instant 1 Authentication modeMib name: sipAuthMode

INI Name:AUTHENTICATIONMODEProfile name: Digital SIP ProtocolDefinitions

User Name StringUp to 50 chars.

Instant User Name used for authenticationMib name: sipAuthUserNameINI Name: USERNAMEProfile name: Digital SIP ProtocolDefinitions

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Password String Instant 50 Password used for authenticationMib name: sipAuthPasswordINI Name: PASSWORD


Cnonce StringUp to 15 chars.

Instant Cnonce parameter used forauthenticationMib name: sipAuthCnonceINI Name: CNONCEProfile name: Digital SIP ProtocolDefinitions

Security

Enable SIPS Enum:Disable(0), Enable(1)

Instant 0 Enable SIP secured URI usageMib name: sipMiscEnableSIPS

INI Name: ENABLESIPSProfile name: Digital SIP ProtocolDefinitions

SIPSRequireClient

Certificate


Offline 0 Should require client certificate uponTLS connection request arrivalMib name:gwSecuritySIPSRequireClientCertificateINI Name:SIPSREQUIRECLIENTCERTIFICATEProfile name: Digital SIP Protocol

DefinitionsMedia

SecurityBehavior

Enum:Preferable(0),Mandatory(1),

preferableSingleMedia(2)

Instant 0 Gateway behavior when recievingoffer/response for media encryptionMib name:gwSecurityMediaSecurityBehaviorINI Name:MEDIASECURITYBEHAVIOURProfile name: Digital SIP ProtocolDefinitions

TLS ReHandshake

Interval

Integer0-1500

Instant 0 The interval between consequentTLS re-handshakes (Minutes).0 - Disables re-handshakes.

Mib name:gwSecurityTLSReHandshakeIntervalINI Name:TLSREHANDSHAKEINTERVALProfile name: Digital SIP ProtocolDefinitions

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

TLS RemoteSubjectName


Instant "" used to verify the remote peerCommon Name (at certificate) whenusing TLS.

Mib name:gwSecurityTLSRemoteSubjectNameINI Name:TLSREMOTESUBJECTNAMEProfile name: Digital SIP ProtocolDefinitions

Peer HostName

VerificationMode

Enum:Disable(0),

ServerOnly(1),ServerAndClient(2)

Instant 0 While using TLS, defines theverification behavior of the hostname sent in the certificate.Mib name:gwSecurityPeerHostNameVerificationMode

INI Name:PEERHOSTNAMEVERIFICATIONMODEProfile name: Digital SIP ProtocolDefinitions

Verify ServerCertificate


Instant 0 Certificate validation behavior0 ? No certificate validation.1 ? Server certificate validation.Mib name:gwSecurityVerifyServerCertificateINI Name:VERIFYSERVERCERTIFICATE


SRTPOfferedSuites

Enum:All(0),

AesCm128HmacShaOne80(1),

AesCm128HmacShaOne32(2)

Instant 0 Offered SRTP Cipher SuitesMib name:gwSecuritySRTPofferedSuitesINI Name: SRTPOFFEREDSUITESProfile name: Digital SIP ProtocolDefinitions

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.21.9 Tab: Media Realm

Frame: SIP Protocol Definitions , Tab: Media Realm

ParameterName


DefaultValue

Description

Index Integer0-15

NA 0 Index Field for line. Internal parameter.Mib name: acCPMediaRealmIndexINI Name: CPMEDIAREALM_INDEXProfile name: Not Profiled

DefaultRealm Name


Offline By default, the default CP media realm isthe first realm appearing in the CP mediarealm table.The parameter enables the user to set anyof the realms appearing in the table as the

default realm.Mib name: acCPMediaDefaultRealmNameINI Name:CPDEFAULTMEDIAREALMNAMEProfile name: Not Profiled

Row Status Enum: NA 0 ROWSTATUS field for line. Internalparameter.Mib name: acCPMediaRealmRowStatusProfile name: Not Profiled


Offline A string representing the name of the mediarealm.Mib name: acCPMediaRealmNameINI Name:CPMEDIAREALM_MEDIAREALMNAMEProfile name: Not Profiled


Offline The IPv4 interface name corresponding tothe one appearing in the interface table.None is the default value when no interfaceis configured. The name is key sensitive.Mib name: acCPMediaRealmIPv4IfINI Name: CPMEDIAREALM_IPV4IFProfile name: Not Profiled

IPv6 Interface String

Up to 15 chars.

Offline The IPv6 interface name corresponding to

the one appearing in the interfacetable.None is the default value when nointerface is configured. The name is keysensitive.Mib name: acCPMediaRealmIPv6IfINI Name: CPMEDIAREALM_IPV6IFProfile name: Not Profiled

Port RangeStart

Integer-1-60000

Offline -1 The starting port for the range of mediaports.Mib name:acCPMediaRealmPortRangeStartINI Name:CPMEDIAREALM_PORTRANGESTARTProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

MediaSession Leg

Integer-1-6000

Offline -1 The number of media sessions associatedwith the range of ports.Mib name:

acCPMediaRealmMediaSessionLegINI Name:CPMEDIAREALM_MEDIASESSIONLEGProfile name: Not Profiled

Port RangeEnd

Integer-1-60000

Read-Only -1 The ending port for the range of mediaports.Mib name:acCPMediaRealmPortRangeEndINI Name:CPMEDIAREALM_PORTRANGEENDProfile name: Not Profiled



ParameterName


DefaultValue

Description

Index Integer0-9



7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description


g711Alaw64k(1),

g711Ulaw64k(2),g729(3), g726(5),

g726r16(6),g726r24(7),g726r32(8),g726r40(9),









PacketizationTime

Integer0-4294967295


Rate Integer0-64000



PayloadType

Integer-1-127


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

SilenceSuppression







ParameterName


DefaultValue

Description

Index Integer0-9



7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description


g711Alaw64k(1),

g711Ulaw64k(2),g729(3), g726(5),

g726r16(6),g726r24(7),g726r32(8),g726r40(9),









PacketizationTime

Integer0-4294967295


Rate Integer0-64000



PayloadType

Integer-1-127


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

SilenceSuppression







ParameterName


DefaultValue

Description

Index Integer0-9



7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description


g711Alaw64k(1),

g711Ulaw64k(2),g729(3), g726(5),

g726r16(6),g726r24(7),g726r32(8),g726r40(9),









PacketizationTime

Integer0-4294967295


Rate Integer0-64000



PayloadType

Integer-1-127


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

SilenceSuppression







ParameterName


DefaultValue

Description

Index Integer0-9



7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description


g711Alaw64k(1),

g711Ulaw64k(2),g729(3), g726(5),

g726r16(6),g726r24(7),g726r32(8),g726r40(9),









PacketizationTime

Integer0-4294967295


Rate Integer0-64000



PayloadType

Integer-1-127


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

SilenceSuppression





2.21.14 Tab: IP Profile

Frame: SIP Protocol Definitions , Tab: IP Profile

ParameterName


DefaultValue

Description

Index Integer1-9

NA 1 Entry number, starting at 1.Mib name: iPProfileIndexINI Name: IPPROFILE_INDEXProfile name: Not Profiled




Destroy(6)

NA 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: iPProfileRowStatusProfile name: SIP IP Profile

Preference Integer0-20 Instant 0 PreferenceMib name: iPProfilePreferenceINI Name: IPPROFILE_IPPREFERENCEProfile name: SIP IP Profile

Profile Name StringUp to 19 chars.

Instant Profile NameMib name: iPProfileProfileNameINI Name: IPPROFILE_PROFILENAMEProfile name: SIP IP Profile

CodersGroup ID

Integer0-4

Instant 0 Coders Group IDMib name: iPProfileCodersGroupIDINI Name: IPPROFILE_CODERSGROUPIDProfile name: SIP IP Profile

FaxTransport

Mode

Integer0-3

Instant 0 Fax Transport ModeMib name: iPProfileFaxTransportModeProfile name: SIP IP Profile

Fax used Enum:NoFax(0), t38(1),

g711(2),fallBack(3),

NotConfigured(255)

Instant 0 Use H.323/Annex D procedure for real timeFAX relay. To use this feature, disable inbandDTMF by setting the FaxTransportMode to 1Mib name: iPProfileIsFaxUsedINI Name: IPPROFILE_ISFAXUSEDProfile name: SIP IP Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

DJBuf MinDelay

Integer0-255

Instant 0 Dynamic Jitter Buffer Minimum Delay (msec)Mib name: iPProfileDJBufMinDelayINI Name:

IPPROFILE_JITTERBUFMINDELAYProfile name: SIP IP Profile

DJBufOptimization

Factor

Integer0-255

Instant 0 Dynamic jitter buffer frame error/delayoptimizationMib name: iPProfileDJBufOptFactorINI Name:IPPROFILE_JITTERBUFOPTFACTORProfile name: SIP IP Profile

RTP DiffServ Integer0-255

Instant 0 IP DiffServ byte valueMib name: iPProfileIPDiffServINI Name: IPPROFILE_IPDIFFSERV

Profile name: SIP IP ProfileSignallingDiffServ

Integer0-255

Instant 0 Type Of Service bits in IP header of signallingmessages.Mib name: iPProfileSigIPDiffServINI Name: IPPROFILE_SIGIPDIFFSERVProfile name: SIP IP Profile

EnableSilence

Suppression

Enum:disable(0),enable(1),

enableWithoutAdaptation(2),

NotConfigured(25

5)

Instant 1 Silence Suppression mode.Mib name: iPProfileSCEINI Name: IPPROFILE_SCEProfile name: SIP IP Profile

RTPRedundancy

Depth

Integer0-255

Instant 0 Enables or disables generation of RFC 2198redundancy packetsMib name: iPProfileRTPRedundancyDepthINI Name:IPPROFILE_RTPREDUNDANCYDEPTHProfile name: SIP IP Profile

RemoteBase UDP

Port

Integer0-65535

Instant 0 Remote Base UDP Port For AggregationMib name: iPProfileRemoteBaseUDPPortINI Name:IPPROFILE_REMOTEBASEUDPPORTProfile name: SIP IP Profile

Cng DetectorMode

Enum:Disable(0),Relay(1),

EventsOnly(2),NotConfigured(25

5)

Instant 0Mib name: iPProfileCngDetectorModeINI Name: IPPROFILE_CNGMODEProfile name: SIP IP Profile

Vxx ModemTransport

Type

Enum:Disable(0),

EnableRelay(1),EnableBypass(2),

EventsOnly(3),NotConfigured(25

5)

Instant 0Mib name: iPProfileVxxModemTransportTypeINI Name:IPPROFILE_VXXTRANSPORTTYPEProfile name: SIP IP Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

NSE Mode Enum:Disable(0),Enable(1),

NotConfigured(255)

Instant 0Mib name: iPProfileNSEModeINI Name: IPPROFILE_NSEMODE

Profile name: SIP IP Profile

PlayRingback

Tone To IP

Enum:NotPlay(0),

Play(1),NotConfigured(25

5)

Instant 0Mib name: iPProfilePlayRingbackToneToIPINI Name: IPPROFILE_PLAYRBTONE2IPProfile name: SIP IP Profile

Enable EarlyMedia


NotConfigured(25

5)

Instant 0Mib name: iPProfileEnableEarlyMediaINI Name:IPPROFILE_ENABLEEARLYMEDIA

Profile name: SIP IP ProfileProgress

Indicator ToIP

Enum:NoPI(0), PI1(1),

PI8(8),NotConfigured(25

5)

Instant 0Mib name: iPProfileProgressIndicatorToIPINI Name:IPPROFILE_PROGRESSINDICATOR2IPProfile name: SIP IP Profile

ECE Enum:NotConfigured(-1),


Instant 1 Enables or disables the echo canceler.Mib name: iPProfileECEINI Name:IPPROFILE_ENABLEECHOCANCELLERProfile name: SIP IP Profile

MediaSecurityBehavior


Preferable(0),Mandatory(1),

preferableSingleMedia(2)

Instant 255Mib name: iPProfileMediaSecurityBehaviorINI Name:IPPROFILE_MEDIASECURITYBEHAVIOURProfile name: SIP IP Profile

Call Limit Integer-1-200000

Instant -1Mib name: iPProfileCallLimitINI Name: IPPROFILE_CALLLIMITProfile name: SIP IP Profile

DisconnectOn Broken

Connection


No(0), yes(1)

Instant -1Mib name:

iPProfileDisconnectOnBrokenConnectionINI Name:IPPROFILE_DISCONNECTONBROKENCONNECTIONProfile name: SIP IP Profile

Copy Dest toRedirectNumber


Disable(0),AfterManipulation(

1),BeforeManipulatio

n(2)

Instant -1Mib name:iPProfileCopyDest2RedirectNumberINI Name:IPPROFILE_COPYDEST2REDIRECTNUMBERProfile name: SIP IP Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Add IE InSetup


InstantMib name: iPProfileAddIEInSetupINI Name: IPPROFILE_ADDIEINSETUP

Profile name: SIP IP Profile

Rx DTMFOption


NotDeclared(0),DeclareRFC2833I

nSDP(1)

Instant -1Mib name: iPProfileRxDTMFOptionINI Name: IPPROFILE_RXDTMFOPTIONProfile name: SIP IP Profile

First TxDTMF Option

Enum:NotConfigured(-1),NotSupported(0),

InfoNortel(1),Notify(2),

InfoCisco(3),RFC2833(4),InfoKorea(5)

Instant -1Mib name: iPProfileFirstTxDtmfOptionINI Name:IPPROFILE_FIRSTTXDTMFOPTIONProfile name: SIP IP Profile

Second TxDTMF Option

Enum:NotConfigured(-1),NotSupported(0),

InfoNortel(1),Notify(2),

InfoCisco(3),RFC2833(4),InfoKorea(5)

Instant -1Mib name: iPProfileSecondTxDtmfOptionINI Name:IPPROFILE_SECONDTXDTMFOPTIONProfile name: SIP IP Profile

Media IP

VersionPreference

Enum:

NotConfigured(-1),onlyIPv4(0),onlyIPv6(1),

preferIPv4(2),preferIPv6(3)

Instant -1

Mib name:iPProfileMediaIPVersionPreferenceINI Name:IPPROFILE_MEDIAIPVERSIONPREFERENCEProfile name: SIP IP Profile

SBC MediaSecurity

Behaviour

Enum:asIs(0), srtp(1),rtp(2), both(3)

Instant 0Mib name:iPProfileSBCMediaSecurityBehaviourINI Name:IPPROFILE_SBCMEDIASECURITYBEHAVIOURProfile name: SIP IP Profile

SBCDiversion

Mode


DontCare(0),Add(1),

Remove(2)

Instant -1Mib name: iPProfileSBCDiversionModeINI Name:IPPROFILE_SBCDIVERSIONMODEProfile name: SIP IP Profile

SBC HistoryInfo Mode


DontCare(0),Add(1),

Remove(2)

Instant -1Mib name: iPProfileSBCHistoryInfoModeINI Name:IPPROFILE_SBCHISTORYINFOMODEProfile name: SIP IP Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

AMDSensitivityParameter

Suit

Integer-1-7

Instant -1Mib name:iPProfileAMDSensitivityParameterSuit

INI Name:IPPROFILE_AMDSENSITIVITYPARAMETERSUITProfile name: SIP IP Profile

AMDSensitivity

Level

Integer-1-15

Instant -1Mib name: iPProfileAMDSensitivityLevelINI Name:IPPROFILE_AMDSENSITIVITYLEVELProfile name: SIP IP Profile

AMD MaxGreeting

Time

Integer-1-511

Instant -1Mib name: iPProfileAMDMaxGreetingTime

INI Name:IPPROFILE_AMDMAXGREETINGTIMEProfile name: SIP IP Profile

AMD MaxPost Silence

GreetingTime

Integer-1-511

Instant -1Mib name:iPProfileAMDMaxPostSilenceGreetingTimeINI Name:IPPROFILE_AMDMAXPOSTSILENCEGREETINGTIMEProfile name: SIP IP Profile

2.21.15 Tab: Telephony Profile

Frame: SIP Protocol Definit ions , Tab: Telephony Prof ile

ParameterName


DefaultValue

Description

Index Integer1-9

NA 1 Entry number, starting at 1.Mib name: telProfileIndexINI Name: TELPROFILE_INDEXProfile name: Not Profiled

Status Enum:

Active(1),NotInService(2),

NotReady(3),CreateAndGo(4),


NA 3 Row-Status Textual Conventions as

defined in RFC 2579: Textual Conventionsfor SMIv2Mib name: telProfileRowStatusProfile name: SIP Tel Profile

Preference Integer0-20

Instant 0 PreferenceMib name: telProfilePreferenceINI Name:TELPROFILE_TELPREFERENCEProfile name: SIP Tel Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

ProfileName


Instant Profile NameMib name: telProfileProfileNameINI Name: TELPROFILE_PROFILENAME

Profile name: SIP Tel Profile

CodersGroup ID

Integer0-4

Instant 0 Coders Group IDMib name: telProfileCodersGroupIDINI Name:TELPROFILE_CODERSGROUPIDProfile name: SIP Tel Profile

FaxTransport

Mode

Integer0-3

Instant 0 Fax Transport ModeMib name: telProfileFaxTransportModeProfile name: SIP Tel Profile

Fax Used Enum:NoFax(0), t38(1),

g711(2),fallBack(3),

NotConfigured(255)

Instant 0 Use H.323/Annex D procedure for realtime FAX relay. To use this feature, disable

inband DTMF by setting theFaxTransportMode to 1.0 - No fax , 1- T.38, 2- Fax Fallback (G.711 with optimization).Mib name: telProfileIsFaxUsedINI Name: TELPROFILE_ISFAXUSEDProfile name: SIP Tel Profile

DJBuf MinDelay

Integer0-255

Instant 0 Dynamic Jitter Buffer Minimum Delay(msec)Mib name: telProfileDJBufMinDelayINI Name:TELPROFILE_JITTERBUFMINDELAYProfile name: SIP Tel Profile

DJBufOptimizatio

n Factor

Integer0-255

Instant 0 Dynamic jitter buffer frame error/delayoptimizationMib name: telProfileDJBufOptFactorINI Name:TELPROFILE_JITTERBUFOPTFACTORProfile name: SIP Tel Profile

RTPDiffServ

Integer0-255

Instant 0 IP DiffServ byte valueMib name: telProfileIPDiffServINI Name: TELPROFILE_IPDIFFSERVProfile name: SIP Tel Profile

Signalling

DiffServ

Integer

0-255

Instant 0 Type Of Service bits in IP header of

signalling messages.Mib name: telProfileSigIPDiffServINI Name: TELPROFILE_SIGIPDIFFSERVProfile name: SIP Tel Profile

VoiceVolume

Integer-32-255

Instant 32 Voice VolumeMib name: telProfileVoiceVolumeINI Name: TELPROFILE_VOICEVOLUMEProfile name: SIP Tel Profile

DTMFVolume

Integer-31-255

Instant 20 DTMF VolumeMib name: telProfileDTMFVolumeINI Name: TELPROFILE_DTMFVOLUMEProfile name: SIP Tel Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Input Gain Integer-32-255

Instant -32 Input GainMib name: telProfileInputGainINI Name: TELPROFILE_INPUTGAIN

Profile name: SIP Tel Profile

EnableReversalPolarity

Enum:No(0), Yes(1),

NotConfigured(255)

Instant 0 FXO: Connect/Disconnect calls upondetection of polarity reversal signal. FXS:generate the signalMib name:telProfileEnableReversalPolarityINI Name:TELPROFILE_ENABLEREVERSEPOLARITYProfile name: SIP Tel Profile

Enable

CurrentDisconnect

Enum:

No(0), Yes(1),NotConfigured(255)

Instant 0 Disconnect call upon detection of current

disconnect signalMib name:telProfileEnableCurrentDisconnectINI Name:TELPROFILE_ENABLECURRENTDISCONNECTProfile name: SIP Tel Profile

EnableDigit

Delivery


NotConfigured(255)

Instant 0 Enables Digit delivery to TEL sideMib name: telProfileEnableDigitDeliveryINI Name:TELPROFILE_ENABLEDIGITDELIVERYProfile name: SIP Tel Profile

EnableEchoCanceler


NotConfigured(255)

Instant 1 Enables or disables the echo canceler.Mib name: telProfileECEINI Name: TELPROFILE_ENABLEECProfile name: SIP Tel Profile

AnalogLamp


NotConfigured(255)

Instant 0 Enable MWI support using an analog lamp(110 Volt)Mib name: telProfileMWIanalogLampINI Name: TELPROFILE_MWIANALOGProfile name: SIP Tel Profile

Display Enum:Disable(0),

Enable(1),NotConfigured(25

5)

Instant 0 Enable MWI support using Caller IDinterface

Mib name: telProfileMWIDisplayINI Name: TELPROFILE_MWIDISPLAYProfile name: SIP Tel Profile

Max FlashHook

DetectionPeriod

Integer0-2000

Instant 0Mib name:telProfileMaxFlashHookDetectionPeriodINI Name:TELPROFILE_FLASHHOOKPERIODProfile name: SIP Tel Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

EnableEarly Media


NotConfigured(255)

Instant 0 Enable Early MediaMib name: telProfileEnableEarlyMediaINI Name:

TELPROFILE_ENABLEEARLYMEDIAProfile name: SIP Tel Profile

ProgressIndicator To

IP

Enum:NoPI(0), PI1(1),

PI8(8),NotConfigured(25

5)

Instant 0 Determine whether to send the ProgressIndicator to IPMib name: telProfileProgressIndicatorToIPINI Name:TELPROFILE_PROGRESSINDICATOR2IPProfile name: SIP Tel Profile

Time ForReorder

Tone

Integer0-255

Instant 0 Duration of reorder tone playing beforeFXO releases line

Mib name: telProfileTimeForReorderToneINI Name:TELPROFILE_TIMEFORREORDERTONEProfile name: SIP Tel Profile

Enable DIDWink



Instant 0Mib name: telProfileEnableDIDWinkINI Name:TELPROFILE_ENABLEDIDWINKProfile name: SIP Tel Profile

Is TwoStage Dial


Disable(0),

Enable(1)

Instant 0Mib name: telProfileIsTwoStageDialINI Name:

TELPROFILE_ISTWOSTAGEDIALProfile name: SIP Tel Profile

DisconnectOn Busy

Tone


No(0), yes(1)

Instant 0Mib name:telProfileDisconnectOnBusyToneINI Name:TELPROFILE_DISCONNECTONBUSYTONEProfile name: SIP Tel Profile

EnableVoice Mail

Delay


Disable(0),

Enable(1)

Instant 0Mib name: telProfileEnableVoiceMailDelayINI Name:

TELPROFILE_ENABLEVOICEMAILDELAYProfile name: SIP Tel Profile

Dial PlanIndex

Integer-1-7

Instant -1 Defines the plan index to be used from theexternal Dial Plan file.Mib name: telProfileDialPlanIndexINI Name:TELPROFILE_DIALPLANINDEXProfile name: SIP Tel Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Enable 911PSAP


Disable(0),

Enable(1)

Instant 0 GwApp Tel Profile TableMib name: telProfileEnable911PSAPINI Name:

TELPROFILE_ENABLE911PSAPProfile name: SIP Tel Profile

Swap TelTo Ip

PhoneNumbers



Instant 0 GwApp Tel Profile TableMib name:telProfileSwapTelToIpPhoneNumbersINI Name:TELPROFILE_SWAPTELTOIPPHONENUMBERSProfile name: SIP Tel Profile

EnableAGC



Instant 0Mib name: telProfileEnableAGC

INI Name: TELPROFILE_ENABLEAGCProfile name: SIP Tel Profile

ECN lpMode

Enum:NotConfigured(-1),AdaptiveNLP(0),DisabledNLP(1),

SilenceOutputNLP(2)

Instant 0Mib name: telProfileECNlpModeINI Name: TELPROFILE_ECNLPMODEProfile name: SIP Tel Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.22 Frame: SIP Routing

2.22.1 Tab: Route Modes

Frame: SIP Routing, Tab: Route Modes

ParameterName


DefaultValue

Description

TEL To IPRoutingMode

Enum:RouteBefore

Map(0),RouteAfterMa

p(1)

Instant 0 Defines order between routing incoming calls fromTel side and performing manipulationsMib name: manipulationAndRoutingModeTel2IpINI Name: ROUTEMODETEL2IPProfile name: Not Profiled

IP To TELRoutingMode

Enum:RouteBeforeMap(0),

RouteAfterMap(1)

Instant 0 Defines order between routing incoming calls fromIP side and performing manipulationsMib name: manipulationAndRoutingModeIp2TelINI Name: ROUTEMODEIP2TELProfile name: Not Profiled

Filter CallsTo IP

Enum:No(0), Yes(1)

Instant 0 When Gatekeeper/Proxy is enabled, do not startsession if called number is not listed or restrictedin Tel to IP routing tableMib name: manipulationAndRoutingFilterCalls2IpINI Name: FILTERCALLS2IPProfile name: Not Profiled

Enable

AlternativeRouting

Enum:

Disable(0),Enable(1),

statusOnly(2)

Instant 0 Enable Tel to IP Alternative Routing. Can be

enabled for status only without affecting routingMib name:manipulationAndRoutingAltRoutingTel2IpEnableINI Name: ALTROUTINGTEL2IPENABLEProfile name: Not Profiled

AlternativeRoutingMode

Enum:None(0),Conn(1),Qos(2),Both(3)

Instant 3 Methods used for Alternative Routing operationMib name:manipulationAndRoutingAltRoutingTel2IpModeINI Name: ALTROUTINGTEL2IPMODEProfile name: Not Profiled

AlternativeRouting

ToneDuration

[ms]

Integer0-20000

Instant 0 Alternative Routing Tone Duration. 0 - disabled(milliseconds)

Mib name:manipulationAndRoutingAltRoutingToneDurationINI Name: ALTROUTINGTONEDURATIONProfile name: Not Profiled

QoSProbability

Integer0-100

Instant 5 in case of QOS problem, a call has this probability(in percents) to continue, in order to reevaluatethe QOS.Mib name:manipulationAndRoutingAltRoutingTel2IpQosAllowTheNCallINI Name:ALTROUTINGTEL2IPQOSALLOWPROB


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

PreferRoutingTable


Instant 0 Prefer Routing TableMib name:manipulationAndRoutingPreferRouteTable

INI Name: PREFERROUTETABLEProfile name: Not Profiled

AlternativeRouting

Telephoneto Ip

ConnectionMethod

Enum:ping(0),

options(1)

Instant 0 Tel to IP Alternative Routing Connectivity Method.Mib name:manipulationAndRoutingAltRoutingTel2IpConnMethodINI Name: ALTROUTINGTEL2IPCONNMETHODProfile name: Not Profiled

RedundantRoutingMode

Enum:Disable(0),

RoutingTable(

1), Proxy(2)

Instant 0 Mode of redundant routing. 0 - Disabled, 1 - Userouting table, 2 - Use proxies listMib name:

manipulationAndRoutingRedundantRoutingModeINI Name: REDUNDANTROUTINGMODEProfile name: Not Profiled

AlternativeRouting

Keep AliveTime

Integer5-2000000

Instant 60 Time interval between OPTIONS Keep-Alivemessages for IP connectivity (seconds)Mib name:manipulationAndRoutingAltRoutingTel2IpKeepAliveTimeINI Name:ALTROUTINGTEL2IPKEEPALIVETIMEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.22.2 Tab: Tel to IP

Frame: SIP Routing, Tab: Tel to IP

ParameterName


DefaultValue

Description

Index Integer0-199

NA 0 Entry number, starting at 0.Mib name: tel2IPRoutingIndexINI Name: PREFIX_INDEXProfile name: Not Profiled



CreateAndGo(4),


Instant 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: tel2IPRoutingRowStatusProfile name: Digital SIP TelToIP Profile

DestinationPhone Prefix


Instant Phone number prefix.up to 50 digits.can be used for defining range of phonenumbers.Mib name: tel2IPRoutingPrefixINI Name: PREFIX_DESTINATIONPREFIXProfile name: Digital SIP TelToIP Profile

Address StringUp to 69 chars.

Instant Address (IP or DNS name)Mib name: tel2IPRoutingAddressINI Name: PREFIX_DESTADDRESSProfile name: Digital SIP TelToIP Profile

SourcePhone Prefix


Instant Calling Phone number prefix.up to 50 digits.can be used for defining range of phonenumbers.Mib name: tel2IPRoutingSrcPrefixINI Name: PREFIX_SOURCEPREFIXProfile name: Digital SIP TelToIP Profile

DestinationPort

Integer0-65534

Instant 0 Destination portMib name: tel2IPRoutingDestPortINI Name: PREFIX_DESTPORT

Profile name: Digital SIP TelToIP ProfileSource IPGroup ID

Integer-1-9

Instant -1Mib name: tel2IPRoutingSourceIPGroupIDINI Name: PREFIX_SRCIPGROUPIDProfile name: Digital SIP TelToIP Profile

DestinationHost Prefix


InstantMib name: tel2IPRoutingDestHostPrefixINI Name: PREFIX_DESTHOSTPREFIXProfile name: Digital SIP TelToIP Profile

DestinationIP Group ID

Integer-1-9

Instant -1Mib name: tel2IPRoutingDestIPGroupID

INI Name: PREFIX_DESTIPGROUPIDProfile name: Digital SIP TelToIP Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Source HostPrefix


InstantMib name: tel2IPRoutingSourceHostPrefixINI Name: PREFIX_SRCHOSTPREFIX

Profile name: Digital SIP TelToIP Profile

TransportType

Enum:notConfigured(-1),

udp(0), tcp(1),tls(2)

Instant -1Mib name: tel2IPRoutingTransportTypeINI Name: PREFIX_TRANSPORTTYPEProfile name: Digital SIP TelToIP Profile

Source TrunkGroup ID

Integer-1-99

Instant -1Mib name:tel2IPRoutingSourceTrunkGroupIDINI Name: PREFIX_SRCTRUNKGROUPIDProfile name: Digital SIP TelToIP Profile

Profile ID Integer

-1-9

Instant -1 Profile ID

Mib name: tel2IPRoutingProfileIDINI Name: PREFIX_PROFILEIDProfile name: Digital SIP TelToIP Profile

2.22.3 Tab: IP to Hunt

Frame: SIP Routing, Tab: IP to Hunt

ParameterName


DefaultValue

Description

Index Integer0-119

NA 0 Entry number, starting at 0.Mib name: iP2TelRoutingIndexINI Name: PSTNPREFIX_INDEXProfile name: Not Profiled




Destroy(6)

Instant 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: iP2TelRoutingRowStatusProfile name: Not Profiled

DestinationPhone Prefix StringUp to 80 chars. Instant Phone number prefix.up to 80 digits.can be used for defining range of phonenumbers.Mib name: iP2TelRoutingPrefixINI Name: PSTNPREFIX_DESTPREFIXProfile name: Not Profiled

Trunk/HuntGroup ID

Integer0-99

Instant 0 Trunk/Hunt group IDMib name: iP2TelRoutingTrunkGroupIDINI Name:PSTNPREFIX_TRUNKGROUPIDProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

SourcePhone Prefix


Instant Calling Phone number prefix.up to 49 digits.can be used for defining range of phone

numbers.Mib name: iP2TelRoutingSrcPrefixINI Name: PSTNPREFIX_SOURCEPREFIXProfile name: Not Profiled


Instant Address (IP or DNS name)Mib name: iP2TelRoutingAddressINI Name:PSTNPREFIX_SOURCEADDRESSProfile name: Not Profiled

Source IPGroup ID

Integer-1-9

Instant -1Mib name: iP2TelRoutingSourceIPGroupID

INI Name: PSTNPREFIX_SRCIPGROUPIDProfile name: Not Profiled

DestinationHost Prefix


InstantMib name: iP2TelRoutingDestHostPrefixINI Name:PSTNPREFIX_DESTHOSTPREFIXProfile name: Not Profiled

Source HostPrefix


InstantMib name: iP2TelRoutingSourceHostPrefixINI Name:PSTNPREFIX_SRCHOSTPREFIXProfile name: Not Profiled

Profile ID Integer0-9

Instant 0 Profile IDMib name: iP2TelRoutingProfileIDINI Name: PSTNPREFIX_PROFILEIDProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.22.4 Tab: Hunt Group

Frame: SIP Routing, Tab: Hunt Group

ParameterName


DefaultValue

Description

Index Integer0-100

NA 0 Trunk numbers, starting at 0.Mib name: trunkGroupSettingsIndexINI Name:TRUNKGROUPSETTINGS_INDEXProfile name: Not Profiled




Destroy(6)

NA 3 Row-Status Textual Conventions asdefined in RFC 2579: TextualConventions for SMIv2Mib name:

trunkGroupSettingsRowStatusProfile name: Not Profiled

Trunk/HuntGroup ID

Integer0-255

Instant 0 Trunk/Hunt group IDMib name:trunkGroupSettingsTrunkGroupIDINI Name:TRUNKGROUPSETTINGS_TRUNKGROUPIDProfile name: Not Profiled

ChannelSelection

Mode

Enum:ByPhoneNumber(0),CyclicAscending(1),AscendingAlways(2),CyclicDescending(3),DescendingAlways(4),

ByPhoneNumberCyclicAscending(5),

BySourcePhoneNumber(6),

TrunkCyclicAscending(7),

TrunkAndChannelCyclicAscending(8),

RingToHuntGroup(9),SelectTrunkBySuppelmentaryServicesTable(10),

ValueNotSet(255)

Instant 0 Selects the next available (free)Gateway port, FXO/PSTN: affectsoutgoing calls chanel selectionFXS:affects incoming call channelselectionMib name:trunkGroupSettingsChannelSelectModeINI Name:TRUNKGROUPSETTINGS_CHANNELSELECTMODEProfile name: Not Profiled

Registration Mode

Enum:PerEndpoint(0),PerGateway(1),

NotApplicable(2),DoNotRegister(4),

perAccount(5),ValueNotSet(255)

Instant 255Mib name:trunkGroupSettingsRegistrationModeINI Name:TRUNKGROUPSETTINGS_REGISTRATIONMODEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

ContactUser


InstantMib name:trunkGroupSettingsContactUser

INI Name:TRUNKGROUPSETTINGS_CONTACTUSERProfile name: Not Profiled

Serving IPGroup

Integer-1-9

Instant -1Mib name:trunkGroupSettingsServingIPGroupINI Name:TRUNKGROUPSETTINGS_SERVINGIPGROUPProfile name: Not Profiled

MWIInterrogation Type

Enum:None(0),UseActivateOnly(1),ResultNotUsed(2),

UseResult(3),NotConfigured(255)

Instant 0 Mib name:trunkGroupSettingsMwiInterrogationTypeINI Name:TRUNKGROUPSETTINGS_MWIINTERROGATIONTYPEProfile name: Not Profiled

2.22.5 Tab: DNS Information

Frame: SIP Routing, Tab: DNS Information

ParameterName


DefaultValue

Description

Index Integer0-19

NA 0 Entry number, starting at 0.Mib name: dnsInfoIndexINI Name: DNS2IP_INDEXProfile name: Not Profiled




Destroy(6)

Instant 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: dnsInfoRowStatusProfile name: Not Profiled

DomainName


Instant Domain NameMib name: dnsInfoDomainNameINI Name: DNS2IP_DOMAINNAMEProfile name: Not Profiled

IP Address 1 StringUp to 15 chars.

Instant IP AddressMib name: dnsInfoFirstIPAddressINI Name: DNS2IP_FIRSTIPADDRESSProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description


Instant IP AddressMib name: dnsInfoSecondIPAddressINI Name: DNS2IP_SECONDIPADDRESS



Instant IP AddressMib name: dnsInfoThirdIPAddressINI Name: DNS2IP_THIRDIPADDRESSProfile name: Not Profiled


Instant IP AddressMib name: dnsInfoFourthIPAddressINI Name: DNS2IP_FOURTHIPADDRESSProfile name: Not Profiled

2.22.6 Tab: SRV Information

Frame: SIP Routing, Tab: SRV Information

ParameterName


DefaultValue

Description

Index Integer0-9

NA 0 Entry number, starting at 0.Mib name: srvInfoIndexINI Name: SRV2IP_INDEXProfile name: Not Profiled




Destroy(6)

Instant 3 Row-Status Textual Conventions as definedin RFC 2579: Textual Conventions forSMIv2Mib name: srvInfoRowStatusProfile name: Not Profiled

InternalDomainName


Instant the Domain name for the SRV queryMib name: srvInfoInternalDomainNameINI Name: SRV2IP_INTERNALDOMAINProfile name: Not Profiled

Transport

Type

Enum:

UDP(0), TCP(1),TLS(2)

Instant 0 the transport type

Mib name: srvInfoTransportTypeINI Name: SRV2IP_TRANSPORTTYPEProfile name: Not Profiled

DNS Name StringUp to 99 chars.

Instant the DNS in the SRV Query ResultMib name: srvInfoDNSNameINI Name: SRV2IP_DNS1Profile name: Not Profiled

Priority Integer0-65000

Instant 0 the Priority of this SRV QueryMib name: srvInfoPriorityINI Name: SRV2IP_PRIORITY1Profile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Weight Integer0-65000

Instant 0 the Weight of this SRV QueryMib name: srvInfoWeightINI Name: SRV2IP_WEIGHT1


Port Integer0-65534

Instant 0 the port of the DNSMib name: srvInfoPortINI Name: SRV2IP_PORT1Profile name: Not Profiled

DNS Name 2 StringUp to 99 chars.

Instant the DNS in the SRV Query ResultMib name: srvInfoDNSName2INI Name: SRV2IP_DNS2Profile name: Not Profiled

Priority 2 Integer0-65000

Instant 0 the Priority of this SRV QueryMib name: srvInfoPriority2

INI Name: SRV2IP_PRIORITY2Profile name: Not Profiled

Weight 2 Integer0-65000

Instant 0 the Weight of this SRV QueryMib name: srvInfoWeight2INI Name: SRV2IP_WEIGHT2Profile name: Not Profiled

Port 2 Integer0-65534

Instant 0 the port of the DNSMib name: srvInfoPort2INI Name: SRV2IP_PORT2Profile name: Not Profiled

DNS Name 3 String

Up to 99 chars.

Instant the DNS in the SRV Query Result

Mib name: srvInfoDNSName3INI Name: SRV2IP_DNS3Profile name: Not Profiled

Priority 3 Integer0-65000

Instant 0 the Priority of this SRV QueryMib name: srvInfoPriority3INI Name: SRV2IP_PRIORITY3Profile name: Not Profiled

Weight 3 Integer0-65000

Instant 0 the Weight of this SRV QueryMib name: srvInfoWeight3INI Name: SRV2IP_WEIGHT3Profile name: Not Profiled

Port 3 Integer0-65534 Instant 0 the port of the DNSMib name: srvInfoPort3INI Name: SRV2IP_PORT3Profile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.22.7 Tab: Alt Route Cause IP to Tel

Frame: SIP Routing, Tab: A lt Route Cause IP to Tel

ParameterName


DefaultValue

Descript ion

Index Integer0-4

NA 0 Entry number, starting at 0.Mib name: altRouteCauseIP2TELIndexINI Name: ALTROUTECAUSEIP2TEL_INDEXProfile name: Not Profiled



CreateAndGo(4),


Instant 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: altRouteCauseIP2TELRowStatusProfile name: Not Profiled

ReleaseCause

Integer0-232

Instant 0 Release CauseMib name:altRouteCauseIP2TELReleaseCauseINI Name:ALTROUTECAUSEIP2TEL_RELEASECAUSEProfile name: Not Profiled

2.22.8 Tab: Alt Route Cause Tel to IP

Frame: SIP Routing, Tab: Al t Route Cause Tel to IP

ParameterName


DefaultValue

Descript ion

Index Integer0-4

NA 0 Entry number, starting at 0.Mib name: altRouteCauseTEL2IPIndexINI Name: ALTROUTECAUSETEL2IP_INDEXProfile name: Not Profiled


NotInService(2),NotReady(3),CreateAndGo(4),


Instant 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2

Mib name: altRouteCauseTEL2IPRowStatusProfile name: Not Profiled

ReleaseCause

Integer0-700

Instant 0 Release CauseMib name:altRouteCauseTEL2IPReleaseCauseINI Name:ALTROUTECAUSETEL2IP_RELEASECAUSEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.22.9 Tab: Forward On Busy Trunk Destination

Frame: SIP Routing, Tab: Forward On Busy Trunk Destination


DefaultValue

Description

Index Integer0-99

NA 0 Entry number, starting at 0.Mib name: forwardOnBusyTrunkDestIndexINI Name:FORWARDONBUSYTRUNKDEST_INDEXProfile name: Not Profiled


NotInService(2),

NotReady(3),

CreateAndGo(4),

CreateAndWait(5),

Destroy(6)

Instant 3 Row-Status Textual Conventions as defined inRFC 2579: Textual Conventions for SMIv2Mib name: forwardOnBusyTrunkDestRowStatusProfile name: Forward On Busy Trunk Destination

TrunkGroup Id

Integer0-99

Instant 0 GwApp Forward On Busy Trunk Destination TableMib name: forwardOnBusyTrunkDestTrunkGroupIdINI Name:FORWARDONBUSYTRUNKDEST_TRUNKGROUPIDProfile name: Forward On Busy Trunk Destination

Forward

Destination

String

Up to 99chars.

Instant GwApp Forward On Busy Trunk Destination Table

Mib name:forwardOnBusyTrunkDestForwardDestinationINI Name:FORWARDONBUSYTRUNKDEST_FORWARDDESTINATIONProfile name: Forward On Busy Trunk Destination

7/23/2019 LTRT-32105 Mediant 3000




2.23 Frame: Snmp Provisioning

2.23.1 Tab: SNMP Managers Table

Frame: Snmp Provis ioning, Tab: SNMP Managers Table

ParameterName


DefaultValue

Description




Destroy(6)

Instant 1 The status of this conceptual row.To create a row in this table, a managermustset this object to either createAndGo(4) orcreateAndWait(5).Until instances of all corresponding columns

areappropriately configured, the value of thecorresponding instance of thesnmpTargetAddrRowStatuscolumn is 'notReady'.In particular, a newly created row cannot bemadeactive until the corresponding instances ofsnmpTargetAddrTDomain,snmpTargetAddrTAddress, andsnmpTargetAddrParams have all been set.The following objects may not be modifiedwhile the

value of this object is active(1):- snmpTargetAddrTDomain- snmpTargetAddrTAddressAn attempt to set these objects while thevalue ofsnmpTargetAddrRowStatus is active(1) willresult inan inconsistentValue error.Mib name: snmpTargetAddrRowStatusProfile name: Not Profiled


Instant 0.0.0.0:0 This object contains a transport address.The format of this address depends on the

value of thesnmpTargetAddrTDomain object.Mib name: snmpTargetAddrTAddressProfile name: Not Profiled

Params StringUp to 255 chars.

Instant 1 The value of this object identifies an entry inthe snmpTargetParamsTable. The identifiedentry contains SNMP parameters to beused when generating messages to be sentto this transport address.Mib name: snmpTargetAddrParamsProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.23.2 Tab: SNMPv3 Users

Frame: Snmp Provisioning, Tab: SNMPv3 Users

ParameterName


DefaultValue

Description

User Status Enum:Active(1),



Destroy(6)

Instant 1 The status of this conceptual row.Until instances of all corresponding columnsare appropriately configured, the value ofthe corresponding instance of theusmUserStatus column is 'notReady'.In particular, a newly created row for a userwho employs authentication, cannot bemade active until the correspondingusmUserCloneFrom andusmUserAuthKeyChange have been set.Further, a newly created row for a user who

also employs privacy, cannot be madeactive until the usmUserPrivKeyChange hasbeen set.The RowStatus TC [RFC2579] requires thatthis DESCRIPTION clause states underwhich circumstances other objects in thisrow can be modified:The value of this object has no effect onwhether other objects in this conceptual rowcan be modified, except forusmUserOwnAuthKeyChange andusmUserOwnPrivKeyChange. For these 2objects, the value of usmUserStatus MUSTbe active.Mib name: usmUserStatusProfile name: Not Profiled

SecurityName


Instant 1 A human readable string representing theuser in Security Model independent format.The default transformation of the User-based Security Model dependent securityID to the securityName and vice versa isthe identity function so that thesecurityName is the same as theuserName.Mib name: usmUserSecurityName


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Auth Protocol Enum:None(0), MD5(1),

SHA(2)

Instant 1 An indication of whether messages sent onbehalf of this user to/from the SNMP engineidentified by usmUserEngineID, can be

authenticated, and if so, the type ofauthentication protocol which is used.An instance of this object is createdconcurrently with the creation of any otherobject instance for the same user (i.e., aspart of the processing of the set operationwhich creates the first object instance in thesame conceptual row).If an initial set operation (i.e. at row creationtime) tries to set a value for an unknown orunsupported protocol, then a 'wrongValue'error must be returned.The value will be overwritten/set when a setoperation is performed on thecorresponding instance ofusmUserCloneFrom.Once instantiated, the value of such aninstance of this object can only be changedvia a set operation to the value of theusmNoAuthProtocol.If a set operation tries to change the valueof an existing instance of this object to anyvalue other than usmNoAuthProtocol, thenan 'inconsistentValue' error must bereturned.If a set operation tries to set the value to theusmNoAuthProtocol while theusmUserPrivProtocol value in the same rowis not equal to usmNoPrivProtocol, then an'inconsistentValue' error must be returned.That means that an SNMP commandgenerator application must first ensure thatthe usmUserPrivProtocol is set to theusmNoPrivProtocol value before it can setthe usmUserAuthProtocol value tousmNoAuthProtocol.Mib name: usmUserAuthProtocolProfile name: Not Profiled

Auth KeyChange


Instant 1 PasswordMib name: usmUserAuthKeyChangeProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

PrivacyProtocol

Enum:None(0), DES(1),

AES(2)

Instant 0 An indication of whether messages sent onbehalf of this user to/from the SNMP engineidentified by usmUserEngineID, can be

protected from disclosure, and if so, thetype of privacy protocol which is used.An instance of this object is createdconcurrently with the creation of any otherobject instance for the same user (i.e., aspart of the processing of the set operationwhich creates the first object instance in thesame conceptual row).If an initial set operation (i.e. at row creationtime) tries to set a value for an unknown orunsupported protocol, then a 'wrongValue'error must be returned.The value will be overwritten/set when a setoperation is performed on thecorresponding instance ofusmUserCloneFrom.Once instantiated, the value of such aninstance of this object can only be changedvia a set operation to the value of theusmNoPrivProtocol.If a set operation tries to change the valueof an existing instance of this object to anyvalue other than usmNoPrivProtocol, thenan 'inconsistentValue' error must bereturned.Note that if any privacy protocol is used,then you must also use an authenticationprotocol. In other words, ifusmUserPrivProtocol is set to anything elsethan usmNoPrivProtocol, then thecorresponding instance ofusmUserAuthProtocol cannot have a valueof usmNoAuthProtocol. If it does, then an'inconsistentValue' error must be returned.Mib name: usmUserPrivProtocolProfile name: Not Profiled

Privacy KeyChange


Instant 1 PasswordMib name: usmUserPrivKeyChange


7/23/2019 LTRT-32105 Mediant 3000




2.24 Frame: Sonet/SDH Parameters Provisioning

2.24.1 Tab: Sonet/SDH General Info

Frame: Sonet/SDH Parameters Prov isioning, Tab: Sonet/SDH General Info

ParameterName


DefaultValue

Description

MediumType

Enum:unknown(0), sonet(1),

sdh(2)

Instant 1 This variable identifies whether aSONETor a SDH signal is used across thisinterface.Mib name: sonetMediumTypeProfile name: Digital Sonet/SDH

Profile

MediumLine

Coding

Enum:sonetMediumOther(1),sonetMediumB3ZS(2),sonetMediumCMI(3),sonetMediumNRZ(4),sonetMediumRZ(5)

Instant 1 This variable describes the line codingfor this interface.The B3ZS and CMI are used forelectrical SONET/SDH signals (STS-1and STS-3).The Non-Return to Zero (NRZ) andthe Returnto Zero are used for opticalSONET/SDH signals.Mib name: sonetMediumLineCodingProfile name: Digital Sonet/SDH

ProfileMedium

Line TypeEnum:

sonetOther(1),sonetShortSingleMode(2

),sonetLongSingleMode(3)

, sonetMultiMode(4),sonetCoax(5),sonetUTP(6)

Instant 1 This variable describes the line typefor this interface. The line typesare Short and Long Range SingleMode fiber or Multi-Mode fiberinterfaces,and coax and UTP for electricalinterfaces.The value sonetOther should be usedwhen the Line Type isnot one of the listed values.Mib name: sonetMediumLineType

Profile name: Digital Sonet/SDHProfile

MediumCircuit

Identifier


Instant This variable contains thetransmission vendor's circuit identifier,for the purpose of facilitatingtroubleshooting.Note that the circuit identifier, ifavailable,is also represented by ifPhysAddress.Mib name:sonetMediumCircuitIdentifierProfile name: Digital Sonet/SDHProfile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

FiberGroup

Mapping

Type

Enum:asynchronousVT15andD

S1(0),

asynchronousTU12andE1(1),

STS1asynchronousDS3(3), undefined(15)

Offline 0 Selects SDH/SONET mapping type(signal label + payload mapping type)for the PSTN interface.

Generally per Fiber Group.Single Fiber Group supported in thePSTN interface of TP6310 andTP12610.Applicable only to the TP-6310 andTP-12610.Relevant only whenacSysTDMBusType = acFRAMERS(2).0 = Asynchronous VT1.5 and DS11 = Asynchronous TU12 and E13 = Asynchronous mapping of DS3 inSTS1, DS3 channelized to DS1s15 = UndefinedShould be in coordination with otherparameters as follows:- sonetMediumType- acTrunkProtocolTypeMib name:acSonetSDHFbrGrpMappingTypeINI Name:SDHFBRGRP_MAPPING_TYPEProfile name: Not Profiled

FiberGroup KLM

NumberingScheme

Enum:NumberingScheme-

MLK(0),NumberingScheme-

LMK(1),NumberingScheme-

KLM(2)

Offline 0 Provides VC/VT numbering schemefor STM-1/OC3 fiber group.

Mib name:acSonetSDHFbrGrpKlmNumberingSchemeINI Name:SDHFBRGRP_KLM_NUMBERING_SCHEMEProfile name: Not Profiled

FiberGroup APSDirection

Mode

Enum:Unidirectional(0),Bidirectional(1)

Offline 0 Sets the Automatic Protection SwitchUnidir/Bidir mode for the Fiber Group.Mib name:acSonetSDHFbrGrpAPSDirectionMode

INI Name:SDHFBRGRP_APS_DIRMODEProfile name: Not Profiled

FiberGroup APS

RevertMode

Enum:NonRevertive(0),

Revertive(1)

Offline 0 Sets the Automatic Protection SwitchRevertive mode for the Fiber Group.Mib name:acSonetSDHFbrGrpAPSRevertModeINI Name:SDHFBRGRP_APS_REVERTMODEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

FiberGroup APS

Wait To

RestoreTime

Integer5-12

Offline 5 Sets the APS Wait-to-restore time forthe Fiber Group.Mib name:

acSonetSDHFbrGrpAPSWaitToRestoreTimeINI Name: SDHFBRGRP_APS_WTRProfile name: Not Profiled

2.25 Frame: SS7 Alias Point Code

2.25.1 Tab: SS7 Alias Point Code

Frame: SS7 Alias Poin t Code, Tab: SS7 Alias Poin t Code

ParameterName


DefaultValue

Description

Point CodeName


Online String name for Alias PC parametersMib name: acSS7APCNameINI Name: SS7_ALIAS_PC_NAMEProfile name: Not Profiled

Point Code(PC)

Integer0-2147483647

Online 0 Alias Point-Code of signaling node.Mib name: acSS7APCPCINI Name: SS7_APC_PC

Profile name: Not ProfiledSignalingNetworkIndicator

(SNI)

Integer2-5

Online 2 SNI (Signaling Network Indicator) of AliasPoint-Code.Mib name: acSS7APCSNIINI Name: SS7_APC_SNIProfile name: Not Profiled

MTC Busy Enum:No(0), Yes(1)

Read-Only 0 Manual busy status of Alias PC.Mib name: acSS7APCMtcBusyINI Name: SS7_ALIAS_PC_MTC_BUSYProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.26 Frame: SS7 Data Link

2.26.1 Tab: Data Link General Info

Frame: SS7 Data Link , Tab: Data Link General Info

ParameterName


DefaultValue

Description


Online String name for Link paramatersMib name: acSS7LinkCommonNameINI Name: SS7_LINK_NAMEProfile name: Not Profiled

Admin State Enum:

OffLine(0),InService(2)

Read-Only 0 Administrative state of singnalling link.

Mib name: acSS7LinkCommonAdminStateINI Name:SS7_LINK_ADMINISTRATIVE_STATEProfile name: Not Profiled

Oper State Enum:OffLine(0), Busy(1),

InService(2)

Read-Only 0 Operational state of singnalling link.Mib name: acSS7LinkCommonOperStateINI Name:SS7_LINK_OPERATIONAL_STATEProfile name: Not Profiled

Trace Level Enum:TraceLevel0(0),TraceLevel1(1)

Online 0 Trace level of singnalling link (level 2).Mib name: acSS7LinkCommonTraceLevelINI Name: SS7_LINK_TRACE_LEVEL


L2 TypeSelector

Enum:nonetype-L2(0),

mtp2(1), m2ua-mgc(2),ss7monitoring(4)

Online 0 Link layer 2 type - defines level 2 media ofsignaling link.Mib name:acSS7LinkCommonL2TypeSelectorINI Name: SS7_LINK_L2_TYPEProfile name: Not Profiled

L3 TypeSelector

Enum:nonetype-L3(0), m2ua-sg(1), mtp3(2), mtp2-

tunneling(3),mtp2OverIP(4),

ss7monitoring(5)

Online 0 Link high layer type - defines level 3 or L2high layer of signalling link.Mib name:acSS7LinkCommonL3TypeSelectorINI Name: SS7_LINK_L3_TYPE



Read-Only 0 Link local busy indicator - if set, indicateslink is busy due to local mtc action.Mib name: acSS7LinkCommonMtcBusyINI Name: SS7_LINK_MTC_BUSYProfile name: Not Profiled

Rdcy BoardNum

Enum:RdcyBoardNum0(0),RdcyBoardNum1(1),RdcyBoardNum2(2)

Online 0 Board number in which the link isphysically connected.Mib name:acSS7LinkCommonRdcyBoardNumINI Name: SS7_LINK_RDCY_BOARD


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Mon SuFilter

Request

Enum:FilterAll(0),

FilterLSSUandFISU(1),

FilterFISU(2),NoFilter(3)

Online 0 SS7 Monitoring link SU filter- Defines thetype of SU message to filter. 0: Filter alltypes of SU messages

1: Filter LSSU and FISU messages2: Filter only FISU messages3: Do not filter any message.Mib name:acSS7LinkCommonMonSuFilterRequestINI Name: SS7_LINK_MON_SU_FILTERProfile name: Not Profiled

2.26.2 Tab: Data Link TDM

Frame: SS7 Data Link , Tab: Data Link TDM

ParameterName


DefaultValue

Description

TrunkNumber

Integer-1-84

Online -1 Trunk number of singnalling link(TDM).Mib name:acSS7LinkTDMTrunkNumberINI Name:SS7_LINK_TRUNK_NUMBERProfile name: Not Profiled

Time Slot

Number

Integer

1-31

Online 1 Time-Slot number of singnalling link

(TDM).Mib name:acSS7LinkTDMTimeSlotNumberINI Name:SS7_LINK_TIMESLOT_NUMBERProfile name: Not Profiled

Inhibit Enum:UnInhibited(0), Inhibited(1)

Read-Only 0 Link inhibit indicator - if set, indicateslink is inhibited..Mib name: acSS7LinkTDMInhibitINI Name: SS7_LINK_INHIBITIONProfile name: Not Profiled

MTP2 Atts Enum:Mtp2Atts0(0), Mtp2Atts1(1),Mtp2Atts2(2), Mtp2Atts3(3)

Online 0 MTP2 attributes of singnalling link(TDM).Mib name: acSS7LinkTDMMtp2AttsINI Name:SS7_LINK_MTP2_ATTRIBUTESProfile name: Not Profiled

Variant Enum:itu(1), ansi(2), China(3)

Online 0 Variant (layer 2) of singnalling link(TDM).Mib name:acSS7LinkCommonVariantINI Name:SS7_LINK_LAYER2_VARIANTProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

CongestionLow Mark

Integer0-255

Online 0 Link congestion low mark ofsignalling link (TDM).Mib name:

acSS7LinkTDMCongestionLowMarkINI Name:SS7_CONGESTION_LOW_MARKProfile name: Not Profiled

CongestionHigh Mark

Integer0-255

Online 0 Link congestion high mark ofsignalling link (TDM).Mib name:acSS7LinkTDMCongestionHighMarkINI Name:SS7_CONGESTION_HIGH_MARKProfile name: Not Profiled

Block Enum:L3linkunblocked(0),L3linklocalblocked(1),

L3linkremoteblockde(2),L3linklocalandremotelocked(3)

Read-Only 0 Link blocked indicator.Mib name: acSS7LinkTDMBlockINI Name: SS7_LINK_BLOCKEDProfile name: Not Profiled

2.26.3 Tab: Data Link UAL

Frame: SS7 Data Link , Tab: Data Link UAL

Parameter

Name

Type Provisioning

Type

Default

Value

Description

Group ID Integer-1-65534

Online -1 Group ID (M2UA) of signaling link.Mib name: acSS7LinkSigTranGroupIdINI Name: SS7_LINK_GROUP_IDProfile name: Not Profiled

Interface ID Integer-1-2147483647

Online -1 Interface ID (M2UA) of singnalling link.Mib name: acSS7LinkSigTranIfidINI Name: SS7_LINK_M2UA_IF_IDProfile name: Not Profiled

2.26.4 Tab: Data Link Tunneling

Frame: SS7 Data Link , Tab: Data Link Tunneling

ParameterName


DefaultValue

Description

Other SideLink Num

Integer0-128

Online 0 MTP2 Tunneling: MGC link number (MTP2 'otherside' of signaling link).Mib name: acSS7LinkTNLOtherSideLinkNumINI Name: SS7_LINK_TNL_MGC_LINK_NUMBERProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

AlignmentMode

Enum:Normal(0),

Emergency(1)

Online 0 MTP2 Tunneling: Alignment mode of signalling linksin tunnel.Mib name: acSS7LinkTNLAlignmentMode

INI Name: SS7_LINK_TNL_ALIGNMENT_MODEProfile name: Not Profiled

CongestionMode

Enum:Accept(0),Discard(1)

Online 0 MTP2 Tunneling: Congestion mode of signalling linksin tunnel.Mib name: acSS7LinkTNLCongestionModeINI Name: SS7_LINK_TNL_CONGESTION_MODEProfile name: Not Profiled

Wait StartCompTimer

Integer0-2147483647

Online 0 MTP2 Tunneling: wait start complete timer.Mib name: acSS7LinkTNLWaitStartCompTimerINI Name:SS7_LINK_TNL_WAIT_START_COMPLETE_TIMER

Profile name: Not ProfiledOos Start

DelayTimer

Integer0-2147483647

Online 0 MTP2 Tunneling: OOS start delay timer.Mib name: acSS7LinkTNLOosStartDelayTimerINI Name:SS7_LINK_TNL_OOS_START_DELAY_TIMERProfile name: Not Profiled

Wait OtherSide In sv

Timer

Integer0-2147483647

Online 0 MTP2 Tunneling: wait for other side to be in servicetimer.Mib name: acSS7LinkTNLWaitOtherSideInsvTimerINI Name:SS7_LINK_TNL_WAIT_OTHER_SIDE_INSV_TIMERProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.27 Frame: SS7 Link Set

2.27.1 Tab: SS7 Linkset

Frame: SS7 Link Set, Tab: SS7 Linkset

ParameterName


DefaultValue

Description


Online String name for LINKSET ParamsMib name: acSS7LinkSetNameINI Name: SS7_LINKSET_NAMEProfile name: Not Profiled

Admin State Enum:

OffLine(0),InService(2)

Read-Only 0 Administrative state of singnalling linkset.

Mib name: acSS7LinkSetAdminStateINI Name:SS7_LINKSET_ADMINISTRATIVE_STATEProfile name: Not Profiled

Oper State Enum:OffLine(0),Busy(1),

InService(2)

Read-Only 0 Operational state of singnalling linkset.Mib name: acSS7LinkSetOperStateINI Name:SS7_LINKSET_OPERATIONAL_STATEProfile name: Not Profiled

Mtc BusyState

Enum:No(0), Yes(1)

Read-Only 0 Manual busy status of singnalling linkset.Mib name: acSS7LinkSetMtcBusyStateINI Name:

SS7_LINKSET_MTC_BUSY_STATUSProfile name: Not Profiled

DPC Integer0-2147483647

Online 0 Destination Point-Code of singnallinglinkset.Mib name: acSS7LinkSetDPCINI Name: SS7_LINKSET_DPCProfile name: Not Profiled

Links Mask Integer0-255

Online 0 Mask for links within singnalling linkset.Mib name: acSS7LinkSetLinksMaskINI Name: SS7_LINKSET_MASKProfile name: Not Profiled

Links Alt Mask Integer0-255

Online 0 Alternate mask for links within singnallinglinkset.Mib name: acSS7LinkSetLinksAltMaskINI Name:SS7_LINKSET_ALTERNATE_MASKProfile name: Not Profiled

Timers Idx Enum:TimersIdx0(0),TimersIdx1(1),TimersIdx2(2),TimersIdx3(3),TimersIdx4(4)

Online 0 Timers Index of singnalling linkset.Mib name: acSS7LinkSetTimersIdxINI Name: SS7_LINKSET_TIMERS_INDEXProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.28 Frame: SS7 Linkset Link

2.28.1 Tab: SS7 Linkset Link

Frame: SS7 Linkset Link, Tab: SS7 Linkset Link

ParameterName


DefaultValue

Description

LinkNo Integer0-128

Online 0 Physical number of signalling link which ispart of the Linkset.Mib name: acSS7LinkSetLinkLinkNoINI Name:SS7_LINKSETLINK_LINK_NUMBERProfile name: Not Profiled

LinkSlc Integer0-15

Online 0 SLC number of signaling link which is partof the Linkset.Mib name: acSS7LinkSetLinkLinkSlcINI Name: SS7_LINKSETLINK_LINK_SLCProfile name: Not Profiled

2.29 Frame: SS7 Linkset Timers

2.29.1 Tab: SS7 Linkset Profiles

Frame: SS7 Linkset Timers, Tab: SS7 Linkset Profiles

ParameterName


DefaultValue

Description


Online String name for Linkset timer-setMib name: acSS7LinkSetTimersNameINI Name: SS7_LKSETTIMERS_NAMEProfile name: Not Profiled

T1 SLT Integer500-2147483647

Online 500 Supervision timer for signalling link testacknowledgement messageMib name: acSS7LinkSetTimersT1SLT

INI Name: SS7_LKSETTIMERS_T1SLTProfile name: Not Profiled

T2 SLT Integer500-2147483647

Online 500 Interval timer for sending signalling link testmessages.Mib name: acSS7LinkSetTimersT2SLTINI Name: SS7_LKSETTIMERS_T2SLTProfile name: Not Profiled

T1 Integer500-2147483647

Online 500 Delay to avoid message mis-sequencing onchangeover.Mib name: acSS7LinkSetTimersT1INI Name: SS7_LKSETTIMERS_T1Profile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

T2 Integer500-2147483647

Online 500 Waiting for changeover acknowledgement.Mib name: acSS7LinkSetTimersT2INI Name: SS7_LKSETTIMERS_T2


T3 Integer500-2147483647

Online 500 Time controlled diversion-delay to avoidmis-sequencing on changebackMib name: acSS7LinkSetTimersT3INI Name: SS7_LKSETTIMERS_T3Profile name: Not Profiled

T4 Integer500-2147483647

Online 500 Waiting for changeback acknowledgement(first attempt).Mib name: acSS7LinkSetTimersT4INI Name: SS7_LKSETTIMERS_T4Profile name: Not Profiled

T5 Integer500-2147483647

Online 500 Waiting for changeback acknowledgement(second attempt).Mib name: acSS7LinkSetTimersT5INI Name: SS7_LKSETTIMERS_T5Profile name: Not Profiled

T7 Integer500-2147483647

Online 500 Waiting for signalling data link connectionacknowledgement.Mib name: acSS7LinkSetTimersT7INI Name: SS7_LKSETTIMERS_T7Profile name: Not Profiled

T12 Integer500-2147483647

Online 500 Waiting for uninhibit acknowledgement.Mib name: acSS7LinkSetTimersT12INI Name: SS7_LKSETTIMERS_T12Profile name: Not Profiled

T13 Integer500-2147483647

Online 500 Waiting for force uninhibit.Mib name: acSS7LinkSetTimersT13INI Name: SS7_LKSETTIMERS_T13Profile name: Not Profiled

T14 Integer500-2147483647

Online 500 Waiting for inhibition acknowledgement.Mib name: acSS7LinkSetTimersT14INI Name: SS7_LKSETTIMERS_T14Profile name: Not Profiled

T17 Integer

500-2147483647

Online 500 Delay to avoid oscillation of initial alignment

failure and link restart.Mib name: acSS7LinkSetTimersT17INI Name: SS7_LKSETTIMERS_T17Profile name: Not Profiled

T20 ANSI Integer500-2147483647

Online 500 Local inhibit test timer.Mib name: acSS7LinkSetTimersT20ANSIINI Name: SS7_LKSETTIMERS_T20_ANSIProfile name: Not Profiled


Online 500 Remote inhibit test timer.Mib name: acSS7LinkSetTimersT21ANSIINI Name: SS7_LKSETTIMERS_T21_ANSIProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

T22 ITU Integer500-2147483647

Online 500 Local inhibit test timer.Mib name: acSS7LinkSetTimersT22ITUINI Name: SS7_LKSETTIMERS_T22_ITU


T23 ITU Integer500-2147483647

Online 500 Remote inhibit test timer.Mib name: acSS7LinkSetTimersT23ITUINI Name: SS7_LKSETTIMERS_T23_ITUProfile name: Not Profiled

2.30 Frame: SS7 Node

2.30.1 Tab: SS7 Node

Frame: SS7 Node, Tab: SS7 Node

ParameterName


DefaultValue

Description


Online String name for SN ParamsMib name: acSS7SignalingNodeNameINI Name: SS7_SN_NAMEProfile name: Not Profiled

Trace Level Enum:TraceLevel0(0),TraceLevel1(1)

Online 0 Trace level of singnalling node (level 3).Mib name:acSS7SignalingNodeTraceLevelINI Name: SS7_SN_TRACE_LEVELProfile name: Not Profiled

Admin State Enum:OffLine(0),

InService(2)

Read-Only 0 Administrative state of singnalling node.Mib name:acSS7SignalingNodeAdminStateINI Name:SS7_SN_ADMINISTRATIVE_STATEProfile name: Not Profiled

Oper State Enum:OffLine(0),

Busy(1),InService(2)

Read-Only 0 Operational state of singnalling node.Mib name: acSS7SignalingNodeOperState

INI Name:SS7_SN_OPERATIONAL_STATEProfile name: Not Profiled


Read-Only 0 Manual busy status of singnalling node.Mib name: acSS7SignalingNodeMtcBusyINI Name: SS7_SN_MTC_BUSY_STATUSProfile name: Not Profiled

Opc Integer0-2147483647

Online 0 Origination (local) point-code of singnallingnode.Mib name: acSS7SignalingNodeOpcINI Name: SS7_SN_OPCProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Rdcy Opc Integer0-2147483647

Read-Only 0 Internal point-code of singnalling node - incase of SS7 shared point code.Mib name: acSS7SignalingNodeRdcyOpc

INI Name: SS7_SN_RDCY_OPCProfile name: Not Profiled

Variant Enum:itu(1), ansi(2),

China(3)

Online 0 Variant of singnalling node.Mib name: acSS7SignalingNodeVariantINI Name: SS7_SN_VARIANTProfile name: Not Profiled

Nw Indicator Enum:International(0),

InternationalSpar e(1), National(2),NationalSpare(3)

Online 0 Network Indicator of singnalling node.Mib name:acSS7SignalingNodeNwIndicatorINI Name: SS7_SN_NIProfile name: Not Profiled

Sp Stp Enum:Sp(0), Stp(1)

Online 0 Routing function of singnalling node.Mib name: acSS7SignalingNodeSpStpINI Name: SS7_SN_SP_STPProfile name: Not Profiled

Timers Idx Enum:TimersIdx0(0),TimersIdx1(1),TimersIdx2(2),TimersIdx3(3),TimersIdx4(4)

Online 0 Index of SNTimers table used for thissignaling node.Mib name: acSS7SignalingNodeTimersIdxINI Name: SS7_SN_TIMERS_INDEXProfile name: Not Profiled

Isup App Enum:Nill(0), Ual(4),

L4Gen(7)

Online 0 Level 4 application that handles ISUPtraffic for this singnalling node.Mib name: acSS7SignalingNodeIsupAppINI Name: SS7_SN_ISUP_APPProfile name: Not Profiled

Sccp App Enum:Nill(0), Ual(4),

L4Gen(7)

Online 0 Level 4 application that handles SCCPtraffic for this singnalling node.Mib name: acSS7SignalingNodeSccpAppINI Name: SS7_SN_SCCP_APPProfile name: Not Profiled

Bisup App Enum:Nill(0), Ual(4),

L4Gen(7)

Online 0 Level 4 application that handles BISUPtraffic for this singnalling node.Mib name: acSS7SignalingNodeBisupApp

INI Name: SS7_SN_BISUP_APPProfile name: Not Profiled

Tup App Enum:Nill(0), Ual(4),

L4Gen(7)

Online 0 Level 4 application that handles TUP trafficfor this signaling node.Mib name: acSS7SignalingNodeTupAppINI Name: SS7_SN_TUP_APPProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.31 Frame: SS7 Node Redundancy Common ParametersFrame

2.31.1 Tab: SS7 Redundancy Common

Frame: SS7 Node Redundancy Common Parameters Frame, Tab: SS7 Redundancy Common

ParameterName


DefaultValue

Description

Cross LinkTransfer Type

Enum:none(0),

tcp(2)

Offline 0 Defines the cross-board connection mediatype for the MTP3 redundancy feature:0 = M3BRDCY_CONN_TYPE_NONE2 = M3BRDCY_CONN_TYPE_TCPMib name:acSS7RedundancyCrossLinkTransferTypeINI Name:SS7MTP3RDCYTRANSFERTYPEProfile name: Not Profiled

Mode Enum:disable(0),enable(1)

Offline 0 Defines the MTP3 Signaling redundancymode:0 = Disabled1 = Enabled

Mib name: acSS7RedundancyModeINI Name: SS7MTP3RDCYMODEProfile name: Not Profiled

Board Num Integer0-2 Offline 0 Defines the board number for the SS7(Signaling System 7) MTP3 redundancymode. Each board is allocated a uniquenumber. All boards share a singleredundancy table.Mib name: acSS7RedundancyBoardNumINI Name: SS7MTP3RDCYBOARDNUMProfile name: Not Profiled

MTP3RedundancyTable Sync

Interval

Integer0-144000

Instant 0 Defines the interval between SS7 tablesautomatic synchronizations, in minutes.

0 = no automatic synchronization isactivated.

Mib name:acSS7RedundancyMTP3RdcyTblSyncIntervalProfile name: Not Profiled

Sync AllBoards

Enum:noAction(0),

Sync(1)

Instant 0 Provide SYNC all boards commandMib name:acSS7RedundancySyncAllBoardsProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Sync Board Integer0-

2147483647

Instant 0 Provide SYNC between this board andanother specific board (parameter is theremote board number)

Mib name: acSS7RedundancySyncBoardProfile name: Not Profiled

Keep AliveWindow

Integer1-15

Offline 1 Defines redundancy X-link keep-alivetolerance window.(x-link between boards in Signaling System7 (SS7) MTP3-User Adaptation Layerredundancy mode).

Mib name:acSS7RedundancyKeepAliveWindowINI Name:SS7MTP3RDCYKEEPALIVEWINDOW

Profile name: Not ProfiledKeep Alive

IntervalInteger0-100

Offline 0 Defines redundancy X-link keep-aliveinterval in secs.(x-link between boards in Signaling System7 (SS7) MTP3-User Adaptation Layerredundancy mode).0 = no keep-alive mechanism is activated.

Mib name:acSS7RedundancyKeepAliveIntervalINI Name:SS7MTP3RDCYKEEPALIVEINTERVAL


7/23/2019 LTRT-32105 Mediant 3000




2.32 Frame: SS7 Node Timers

2.32.1 Tab: SS7 Node Profiles

Frame: SS7 Node Timers, Tab: SS7 Node Profiles

ParameterName


DefaultValue

Description


Online String name for SN timer-setMib name:acSS7SignalingNodeTimersNameINI Name: SS7_SNTIMERS_NAMEProfile name: Not Profiled

T6 Integer500-2147483647 Online 500 Delay to avoid message mis-sequencing oncontrolled rerouting.Mib name: acSS7SignalingNodeTimersT6INI Name: SS7_SNTIMERS_T6Profile name: Not Profiled

T8 Integer500-2147483647

Online 500 Transfer prohibited inhibition timer(transient solution).Mib name: acSS7SignalingNodeTimersT8INI Name: SS7_SNTIMERS_T8Profile name: Not Profiled

T10 Integer500-2147483647

Online 500 Waiting to repeat signalling route set testmessage.

Mib name: acSS7SignalingNodeTimersT10INI Name: SS7_SNTIMERS_T10Profile name: Not Profiled

T11 Integer500-2147483647

Online 500 Transfer restricted timer.Mib name: acSS7SignalingNodeTimersT11INI Name: SS7_SNTIMERS_T11Profile name: Not Profiled

T15 Integer500-2147483647

Online 500 Waiting to start signalling route setcongestion test.Mib name: acSS7SignalingNodeTimersT15INI Name: SS7_SNTIMERS_T15Profile name: Not Profiled

T16 Integer500-2147483647

Online 500 Waiting for route set congestion statusupdate.Mib name: acSS7SignalingNodeTimersT16INI Name: SS7_SNTIMERS_T16Profile name: Not Profiled

T18 ITU Integer500-2147483647

Online 500 Timer within a signalling point whose MTPrestarts for supervising link and link setactivation as well as the receipt of routinginformation.Mib name:acSS7SignalingNodeTimersT18ITU

INI Name: SS7_SNTIMERS_T18_ITUProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

T19 ITU Integer500-2147483647

Online 500 Supervision timer during MTP restart toavoid possible ping-pong of TFP, TFR andTRA messages.

Mib name:acSS7SignalingNodeTimersT19ITUINI Name: SS7_SNTIMERS_T19_ITUProfile name: Not Profiled

T20 ITU Integer500-2147483647

Online 500 Overall MTP restart timer at the signallingpoint whose MTP restarts.Mib name:acSS7SignalingNodeTimersT20ITUINI Name: SS7_SNTIMERS_T20_ITUProfile name: Not Profiled

T21 ITU Integer

500-2147483647

Online 500 Overall MTP restart timer at a signalling

point adjacent to one whose MTP restarts.Mib name:acSS7SignalingNodeTimersT21ITUINI Name: SS7_SNTIMERS_T21_ITUProfile name: Not Profiled

T24 ITU Integer500-2147483647

Online 500 Stabilising timer after removal of localprocessor outage, used in LPO latching toRPO (national option).Mib name:acSS7SignalingNodeTimersT24ITUINI Name: SS7_SNTIMERS_T24_ITUProfile name: Not Profiled

T22 ANSI Integer500-2147483647 Online 500 Timer at restarting SP waiting for signallinglinks to bacome available.Mib name:acSS7SignalingNodeTimersT22ANSIINI Name: SS7_SNTIMERS_T22_ANSIProfile name: Not Profiled


Online 500 Timer at restarting SP, started after T22,waiting to receive all traffic restart allowedmessages.Mib name:acSS7SignalingNodeTimersT23ANSIINI Name: SS7_SNTIMERS_T23_ANSIProfile name: Not Profiled


Online 500 Timer at restarting SP with transfer function,started after T23, waiting to broadcast alltraffic restart allowed messages.Mib name:acSS7SignalingNodeTimersT24ANSIINI Name: SS7_SNTIMERS_T24_ANSIProfile name: Not Profiled


Online 500 Timer at SP adjacent to restarting SPwaiting for traffic restart allowed message.Mib name:acSS7SignalingNodeTimersT25ANSI

INI Name: SS7_SNTIMERS_T25_ANSIProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description


Online 500 Timer at restarting SP waiting to repeattraffic restart waiting message.Mib name:

acSS7SignalingNodeTimersT26ANSIINI Name: SS7_SNTIMERS_T26_ANSIProfile name: Not Profiled


Online 500 This parameter is used to define theminimum duration of unavailability for a fullrestart.Mib name:acSS7SignalingNodeTimersT27ANSIINI Name: SS7_SNTIMERS_T27_ANSIProfile name: Not Profiled

T28 ANSI Integer

500-2147483647

Online 500 Timer at SP adjacent to restarting SP

waiting for traffic restart waiting message.Mib name:acSS7SignalingNodeTimersT28ANSIINI Name: SS7_SNTIMERS_T28_ANSIProfile name: Not Profiled


Online 500 Timer started when TRA sent in responseto unexpected TRA or TRW.Mib name:acSS7SignalingNodeTimersT29ANSIINI Name: SS7_SNTIMERS_T29_ANSIProfile name: Not Profiled

T30 ANSI Integer

500-2147483647

Online 500 Timer to limit sending of TFPs and TFRs in

response to unexpected TRA or TRW.Mib name:acSS7SignalingNodeTimersT30ANSIINI Name: SS7_SNTIMERS_T30_ANSIProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.33 Frame: SS7 Redundancy

2.33.1 Tab: SS7 Node Redundancy

Frame: SS7 Redundancy, Tab: SS7 Node Redundancy

ParameterName


DefaultValue

Description

Board Ip IPAddress Online IP address of the board.Mib name: acSS7RedundantSNBoardIpINI Name: SS7_RDCYSN_BOARD_IPProfile name: Not Profiled

OPC Integer

0-2147483647

Online 0 Internal point-code of the SN (Signaling

Node).Mib name: acSS7RedundantSNOPCINI Name: SS7_RDCYSN_OPCProfile name: Not Profiled

2.34 Frame: SS7 Route Frame

2.34.1 Tab: SS7 Route

Frame: SS7 Route Frame, Tab: SS7 Route

ParameterName


DefaultValue

Descripti on

LinkSet No Integer0-128

Online 0 Number of signalling linkset which is part of theRouteset.Mib name: acSS7RouteSetRouteLinkSetNoINI Name:SS7_ROUTESETROUTE_LINKSET_NUMBERProfile name: Not Profiled

Priority Integer0-254

Online 0 Priority of route within routeset.Mib name: acSS7RouteSetRoutePriority

INI Name:SS7_ROUTESETROUTE_PRIORITYProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.35 Frame: SS7 Routeset

2.35.1 Tab: SS7 Route Set

Frame: SS7 Routeset, Tab: SS7 Route Set

ParameterName


DefaultValue

Description


Online String name for ROUTESET ParamsMib name: acSS7RouteSetNameINI Name: SS7_ROUTESET_NAMEProfile name: Not Profiled

AdminState Enum:OffLine(0),

InService(2)

Read-Only 0 Administrative state of signalling route set.Mib name: acSS7RouteSetAdminStateINI Name:SS7_ROUTESET_ADMINISTRATIVE_STATEProfile name: Not Profiled

Oper State Enum:OffLine(0),Busy(1),

InService(2)

Read-Only 0 Operational state of signalling route set.Mib name: acSS7RouteSetOperStateINI Name:SS7_ROUTESET_OPERATIONAL_STATEProfile name: Not Profiled

DPC Integer0-2147483647

Online 0 Destination Point-Code of singnallingroutesetset.Mib name: acSS7RouteSetDPCINI Name: SS7_ROUTESET_DPC

Profile name: Not ProfiledRoute Mask Integer

0-255Online 0 Mask for route within signaling routeset.

Mib name: acSS7RouteSetRouteMaskINI Name: SS7_ROUTESET_MASKProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.36 Frame: SS7 Routing Context

2.36.1 Tab: SS7 Routing Context

Frame: SS7 Routing Context, Tab: SS7 Routing Context

ParameterName


DefaultValue

Description

Sn Idx Integer0-5

Online 0 This parameter is used to specify the M3UARouting Context DPC SN-Index.Mib name:acSS7SigTranRoutingContextSnIdxINI Name: SS7_RC_SN_INDEXProfile name: Not Profiled

Spc Integer-1-16777215

Read-Only -1 This parameter is used to specify the M3UARouting Context DPC parameterMib name:acSS7SigTranRoutingContextSpcINI Name: SS7_RC_SPCProfile name: Not Profiled

OriginationPoint

Code(OPC)

Opc1 Integer-1-16777215

Online -1 This parameter is used to specify the M3UARouting Context,First element of OPC list.

Mib name:acSS7SigTranRoutingContextOpc1INI Name: SS7_RC_OPC1Profile name: Not Profiled


Online -1 This parameter is used to specify the M3UARouting Context,Second element of OPClist.Mib name:acSS7SigTranRoutingContextOpc2INI Name: SS7_RC_OPC2Profile name: Not Profiled

Opc3 Integer

-1-16777215

Online -1 This parameter is used to specify the M3UA

Routing Context, Third element of OPC list.Mib name:acSS7SigTranRoutingContextOpc3INI Name: SS7_RC_OPC3Profile name: Not Profiled


Online -1 This parameter is used to specify the M3UARouting Context, Fourth element of OPClist.Mib name:acSS7SigTranRoutingContextOpc4INI Name: SS7_RC_OPC4Profile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

ServiceIndicators

List(SI)

Si1 Integer-1-15

Online -1 This parameter is used to specify the M3UARouting Context, First element of SI list.Mib name:acSS7SigTranRoutingContextSi1INI Name: SS7_RC_SI1Profile name: Not Profiled

Si2 Integer-1-15

Online -1 This parameter is used to specify the M3UARouting Context, Second element of SI list.Mib name:acSS7SigTranRoutingContextSi2INI Name: SS7_RC_SI2

Profile name: Not ProfiledSi3 Integer

-1-15Online -1 This parameter is used to specify the M3UA

Routing Context, Third element of SI list.Mib name:acSS7SigTranRoutingContextSi3INI Name: SS7_RC_SI3Profile name: Not Profiled

Si4 Integer-1-15

Online -1 This parameter is used to specify the M3UARouting Context, Fourth element of SI list.Mib name:acSS7SigTranRoutingContextSi4INI Name: SS7_RC_SI4


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.37 Frame: System Sett ing (TP-8410)

2.37.1 Tab: Diagnostics

Frame: System Setting (TP-8410), Tab: Diagnostics

ParameterName


DefaultValue

Description

EnableDiagnostics

Enum:Disabled(0),

BuiltInTest(1),BuiltInTestwithPartialFlash(2),

BuiltInTestWithS

DRAM(3),BuiltInTestOnUto

piaVxb(4),InternalUse(99)

Offline 0 Checks the correct functionality of thedifferent hardware components on theboard. On completion of the check, theboard sends an EV_END_BIT value, whichcontains information on the test results ofeach hardware component.

0 = No diagnostics (default)1 = Perform diagnostics (full test of DSPs,PCM, Switch, LAN, PHY and Flash)2 = Perform diagnostics (full test of DSPs,PCM, Switch, LAN, PHY, but partial, test ofFlash, a quicker mode)Mib name: acSysDiagnosticsEnableINI Name: ENABLEDIAGNOSTICSProfile name: Not Profiled

EnablePerformance

ThresholdAlarms

Enum:Disable(0),

Enable(1)

Instant 0 This parameter enables sending SNMPtraps and Syslog messages when

performance of the device is degraded(according to the configured thresholds).Mib name:acSysDiagnosticsEnablePerformanceThresholdAlarmsINI Name:PM_ENABLETHRESHOLDALARMSProfile name: Not Profiled

Syslog enable Enum:Disable(0),Enable(1)

Online 0 Enable SysLog protocol log.Mib name: acSyslogEnableINI Name: ENABLESYSLOGProfile name: Not Profiled

Syslog serverIp Address

IP Address Instant 0.0.0.0 This parameter defines the IP address indotted format notation.e.g., 192.10.1.255Range = Legal IP addressMib name: acSyslogServerIPAddressINI Name: SYSLOGSERVERIPProfile name: Not Profiled

Syslog ServerPort Number

Integer0-65535

Instant 514 Defines the Port number of the SyslogServer.Range = Legal Port NumberMib name:acSyslogAcSyslogServerPortNumber

INI Name: SYSLOGSERVERPORTProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

SyslogFacility

Integer16-23

Online 16 parameter to determine the facility numberat syslog messages.can be:

16 = local use 0 (local0)17 = local use 1 (local1)..23 = local use 0 (local7)Mib name: acSyslogFacilityINI Name: SYSLOGFACILITYProfile name: Not Profiled

2.37.2 Tab: Application Settings

Frame: System Setting (TP-8410), Tab: Application Settings

ParameterName


DefaultValue

Description

NTP

Server IPAddress

IP Address Instant 0 This parameter is used todefine the NTP server's IPaddress.Range = Legal IP addressMib name:acSysNTPServerIPAddressINI Name: NTPSERVERIP

Profile name: Digital NetworkProfile

Utc Offset(seconds)

Integer-43200-43200

Instant 0 This parameter is used todefine the NTP time to offset, inseconds.

Default = 0Range = -43200 to +43200secondsMib name: acSysNTPUtcOffsetINI Name:NTPSERVERUTCOFFSET


Update Interval(seconds)

Integer1-2147483647

Instant 86400 This parameter defines the NTPupdate interval, in seconds. It'sinadvisable to set it exceeding 1month (2592000 seconds).Range = 0 to 2592000 secondsDefault = 86400 secondsMib name:acSysNTPUpdateIntervalINI Name:NTPUPDATEINTERVALProfile name: Digital NetworkProfile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Day LightSaving Time

Mode Enum:Disable(0), Enable(1) Instant 0 Determines whether to enablethe time ajustment to day lightsaving time while update timefrom NTP serverMib name:acSysDayLightSavingTimeModeINI Name:DAYLIGHTSAVINGTIMEENABLEProfile name: Digital NetworkProfile

Offset (min) Integer0-120 Instant 60 whenDayLightSavingTimeEnable isEnable, this parametesdetermine the fix size inminutes: 0-120Mib name:acSysDayLightSavingTimeOffsetINI Name:DAYLIGHTSAVINGTIMEOFFSETProfile name: Digital NetworkProfile

Start(mo:dd:hh:mm)


Instant This parameter defines the dateand time of starting day lighttime in current year.Format mo:dd:hh:mmMib name:acSysDayLightSavingTimeStartINI Name:DAYLIGHTSAVINGTIMESTARTProfile name: Digital NetworkProfile

End

(mo:dd:hh:mm)

String

Up to 11 chars.

Instant This parameter defines the date

and time of ending day lighttime in current year.Format mo:dd:hh:mm.Mib name:acSysDayLightSavingTimeEndINI Name:DAYLIGHTSAVINGTIMEENDProfile name: Digital NetworkProfile

STUN

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

STUN Enable Enum:Disable(0), Enable(1)

Offline 0 This parameter is used toenable the STUN module, usedfor NAT traversal of UDP

packets.Mib name: acSysSTUNEnableINI Name: ENABLESTUNProfile name: Digital NetworkProfile

Primary ServerIP

IP Address Offline 0 Defines the primary STUNServer IP address.Range = Legal IP addressMib name:acSysSTUNPrimaryServerIPINI Name:STUNSERVERPRIMARYIP


SecondaryServer IP

IP Address Offline 0 Defines the secondary STUNserver IP address.Range = Legal IP addressMib name:acSysSTUNSecondaryServerIPINI Name:STUNSERVERSECONDARYIPProfile name: Digital NetworkProfile

Binding Life

Time

Integer

0-2147483647

Offline 30 This parameter is used to

define the NAT binding lifetime,in seconds. STUN refreshes thebinding information after thistime expires.Range = 0 - 2592000Mib name:acSysSTUNBindingLifeTimeINI Name:NATBINDINGDEFAULTTIMEOUTProfile name: Digital NetworkProfile

System NATType

Enum:stunDisabled(-1),

none(0), fullCone(1),restricted(2),

portRestricted(3),symmetric(4),

symmetricFireWall(5),blocked(6),

unknown(7),natIdentificationInProgr

ess(10)

Read-Only 0 Identified NAT type.;-1 - STUNclient is disabled;0 - None;1 -FullCone;2 - Restricted;3 -PortRestricted;4 - Symmetric;5- SymmetricFireWall;6 -Blocked;7 - Unknown;10 - NATidentification in progressMib name: acSysNATTypeProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Keep Alive TrapPort

Integer0-65334

Instant 162 The port to which the keep alivetraps are sent to.Mib name:

acSysSNMPKeepAliveTrapPortINI Name:KEEPALIVETRAPPORTProfile name: Digital NetworkProfile

DHCP

DHCP Enable Enum:Disable(0), Enable(1)

Online 0 Enables/disables DHCPsupport.


After the gateway is poweredup, it attempts to communicatewith a BootP server. If a BootPserver does not respond and ifDHCP is enabled, the gatewayattempts to obtain its IPaddress and other networkparameters from the DHCPserver.Note that throughout the DHCPprocedure, the BootP/TFTPapplication must be

deactivated. If it isn?tdeactivated, the gatewayreceives a response from theBootP server instead of theDHCP server.For additional information onDHCP, refer to the productdocumentation.Note: DHCPEnable is a special?Hidden? parameter. Oncedefined and saved in flashmemory, its assigned valuedoesn?t revert to its default

even if the parameter doesn'tappear in the INI file.Mib name:acSysIPDHCPEnableINI Name: DHCPENABLEProfile name: Digital NetworkProfile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

DHCP SpeedFactor

Integer0-10

Offline 1 Controls the DHCP renewalspeed. When set to 0, theDHCP lease renewal is

disabled. Otherwise, therenewal time is divided by thisfactor. Some DHCP-enabledrouters perform better when setto 4.

0 = Disable DHCP1 = Normal2 to 10 = FastMib name:acSysIPDHCPSpeedFactorINI Name:DHCPSPEEDFACTORProfile name: Digital NetworkProfile

2.37.3 Tab: NFS Settings

Frame: System Setting (TP-8410), Tab: NFS Settings

ParameterName


DefaultValue

Description

Index Integer0-15 NA 0 Index Field for line. Internal parameter.Mib name: acSysNFSIndexINI Name: NFSSERVERS_INDEXProfile name: Not Profiled

Status Enum: NA 0 ROWSTATUS field for line. Internalparameter.Mib name: acSysNFSRowStatusProfile name: Digital NFS Profile

Host Or IP StringUp to 40 chars.

Online The domain name or IP address of theNFS server. If a domain name isprovided, then a DNS server must beconfigured.

Mib name: acSysNFSHostOrIPINI Name: NFSSERVERS_HOSTORIPProfile name: Digital NFS Profile

Root Path StringUp to 100

chars.

Online Path to the root of the exported filesystem.Mib name: acSysNFSRootPathINI Name: NFSSERVERS_ROOTPATHProfile name: Digital NFS Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Nfs Version Enum:v2(2), v3(3)

Online 3 NFS version to use with this remote filesystem, 2 or 3 (default).Mib name: acSysNFSNfsVersion

INI Name:NFSSERVERS_NFSVERSIONProfile name: Digital NFS Profile

Auth Type Enum:null(0), unix(1)

Online 1 Identifies the authentication method usedwith this remote file system, 0 forAUTH_NULL, 1 for AUTH_UNIX(default).Mib name: acSysNFSAuthTypeINI Name: NFSSERVERS_AUTHTYPEProfile name: Digital NFS Profile

UID Integer

0-2147483647

Online 0 User ID used in authentication if using

AUTH_UNIX. The default is 0.Mib name: acSysNFSUIDINI Name: NFSSERVERS_UIDProfile name: Digital NFS Profile

GID Integer0-2147483647

Online 1 Group ID used in authentication if usingAUTH_UNIX. The default is 1.Mib name: acSysNFSGIDINI Name: NFSSERVERS_GIDProfile name: Digital NFS Profile

Vlan Type Enum:oam(0),media(1)

Online 0 The VLAN, OAM(0) or Media(1), to usewhen accessing this remote file system.The default is to use;the media VLAN.

This parameters applies only if multipleIP addresses are configured on thisboard.Mib name: acSysNFSVlanTypeINI Name: NFSSERVERS_VLANTYPEProfile name: Digital NFS Profile

7/23/2019 LTRT-32105 Mediant 3000




2.37.4 Tab: Security Settings

Frame: System Setting (TP-8410), Tab: Securi ty Settings

ParameterName


DefaultValue

Description

TLS &Certificates

TLSVersion

Enum: Online 0 This parameter defines the supportedversions of SSL/TLS.When set to 0, SSL/TLS handshakesalways start with SSL 2.0 and switch toTLS 1.0 if both peers support it.When set to 1, TLS 1.0 is the onlyversion supported; clients attempting to

contact the device using SSL 2.0 will berejected.

Possible values:0 = SSL 2.0, SSL 3.0, and TLS 1.0 aresupported (default)1 = TLS 1.0 will always be usedMib name: acSysSecurityTLSVersionINI Name: TLSVERSIONProfile name: Not Profiled

TLS FIPS140 Mode

Enum:disabled(0),

enabled(1)

Offline 0 Determines whether to enable theFIPS140 mode for TLS.

Mib name:acSysSecurityTLSFIPS140ModeINI Name: TLS_FIPS140_MODEProfile name: Digital Security Profile

HTTPSCipherString


Offline 0 Requires client certificates for HTTPSconnection. The client certificate must bepreloaded on the gateway, and itsmatching private key must be installed onthe managing computer. Time and datemust be correctly set on the gateway, forthe client certificate to be verified.Mib name:acSysWEBHTTPSCipherStringINI Name: HTTPSCIPHERSTRINGProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

HTTPSRequireClient

Certificate


Online 0 Requires client certificates for HTTPSconnection.The client certificate must be preloaded

on the gateway, and its matching privatekey must be installed on the managingcomputer.Time and date must be correctly set onthe gateway, for the client certificate tobe verified.Mib name:acSysSecurityHTTPSRequireClientCertificateINI Name:HTTPSREQUIRECLIENTCERTIFICATEProfile name: Digital Security Profile

AUPDVerify

Certificates


Offline 0 This parameter configures theAutoUpdate facility to verify servercertificates when using HTTPS.Mib name:acSysSecurityAUPDVerifyCertificatesINI Name: AUPDVERIFYCERTIFICATESProfile name: Digital Security Profile

OCSP

OCSPEnable


Instant 0 Enables or disables certificate checkingvia OCSP.Mib name: acSysSecurityOcspEnableINI Name: OCSPENABLE

Profile name: Digital Security Profile

OCSPServer IP

Type

inetAddressType Instant This parameter defines the OCSPserver's IP address Type.0 - unknown1 - IPv42 - IPv6Mib name:acSysSecurityOcspServerIPTypeProfile name: Digital Security Profile

OCSPServer IP

StringUp to chars.

Instant This parameter defines the OCSPserver's IP address.Range = Legal IP addressMib name: acSysSecurityOcspServerIPINI Name: OCSPSERVERIPProfile name: Digital Security Profile

OCSPSecondaryServer IP

Type

inetAddressType Instant This parameter defines the OCSPsecondary server's IP address Type.0 - unknown1 - IPv42 - IPv6Mib name:acSysSecurityOcspSecondaryServerIPTypeProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description


StringUp to chars.

Instant This parameter defines the OCSPsecondary server IP address.Range = Legal IP address

Mib name:acSysSecurityOcspSecondaryServerIPINI Name:OCSPSECONDARYSERVERIPProfile name: Not Profiled

OCSPServer Port

Integer1-32767

Instant 2560 This parameter defines the OCSPserver's TCP port number.Range = 1 to 32767.Mib name: acSysSecurityOcspServerPortINI Name: OCSPSERVERPORTProfile name: Digital Security Profile

OCSPDefaultResponse

Enum:rejectPeerCertificate(0),

allowPeerCertificate(1)

Instant 0 Determines default OCSP behavior whenthe server cannot be contacted.0 = reject peer certificate.1 = allow peer certificate.

Mib name:acSysSecurityOcspDefaultResponseINI Name: OCSPDEFAULTRESPONSEProfile name: Digital Security Profile

RequireStrict

Certification


Online 0 Verify the certification strictly - for SSLMib name:acSysSecurityRequireStrictCertificationINI Name: REQUIRESTRICTCERT


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.37.5 Tab: License

Frame: System Setting (TP-8410), Tab: License

ParameterName


DefaultValue

Description

SupportedFeatures


Read-Only List of all avtivated features.Mib name: acSysLicenseKeyActiveListProfile name: Not Profiled

2.38 Frame: System Setting Provisioning (TP-6310)

2.38.1 Tab: Diagnostics

Frame: System Setting Provisioning (TP-6310), Tab: Diagnostics

ParameterName


DefaultValue

Description

EnableDiagnostics

Enum:Disabled(0),

BuiltInTest(1),BuiltInTestwithPart

ialFlash(2),BuiltInTestWithSD

RAM(3),BuiltInTestOnUtopi

aVxb(4),InternalUse(99)

Offline 0 Checks the correct functionality of thedifferent hardware components on theboard. On completion of the check, theboard sends an EV_END_BIT value,which contains information on the testresults of each hardware component.

0 = No diagnostics (default)1 = Perform diagnostics (full test ofDSPs, PCM, Switch, LAN, PHY andFlash)2 = Perform diagnostics (full test ofDSPs, PCM, Switch, LAN, PHY, butpartial, test of Flash, a quicker mode)Mib name: acSysDiagnosticsEnableINI Name: ENABLEDIAGNOSTICSProfile name: Not Profiled

Enable

PerformanceThreshold

Alarms

Enum:


Instant 0 This parameter enables sending SNMP

traps and Syslog messages whenperformance of the device is degraded(according to the configured thresholds).Mib name:acSysDiagnosticsEnablePerformanceThresholdAlarmsINI Name:PM_ENABLETHRESHOLDALARMSProfile name: Not Profiled

Syslog enable Enum:Disable(0),Enable(1)

Online 0 Enable SysLog protocol log.Mib name: acSyslogEnableINI Name: ENABLESYSLOG


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Syslog serverIp Address

IP Address Instant 0.0.0.0 This parameter defines the IP address indotted format notation.e.g., 192.10.1.255

Range = Legal IP addressMib name: acSyslogServerIPAddressINI Name: SYSLOGSERVERIPProfile name: Not Profiled

Syslog ServerPort Number

Integer0-65535

Instant 514 Defines the Port number of the SyslogServer.Range = Legal Port NumberMib name:acSyslogAcSyslogServerPortNumberINI Name: SYSLOGSERVERPORTProfile name: Not Profiled

SyslogFacility Integer16-23 Online 16 parameter to determine the facilitynumber at syslog messages.can be:16 = local use 0 (local0)17 = local use 1 (local1)..23 = local use 0 (local7)Mib name: acSyslogFacilityINI Name: SYSLOGFACILITYProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.38.2 Tab: Application Settings

Frame: System Setting Provisioning (TP-6310), Tab: Application Settings

ParameterName


DefaultValue

Description

NTP

Server IPAddress

IP Address Instant 0 This parameter is used todefine the NTP server's IPaddress.Range = Legal IP addressMib name:acSysNTPServerIPAddressINI Name: NTPSERVERIPProfile name: Digital Network

Profile

Utc Offset(seconds)

Integer-43200-43200

Instant 0 This parameter is used todefine the NTP time to offset, inseconds.

Default = 0Range = -43200 to +43200secondsMib name: acSysNTPUtcOffsetINI Name:NTPSERVERUTCOFFSETProfile name: Digital Network

ProfileUpdate Interval

(seconds)Integer

1-2147483647Instant 86400 This parameter defines the NTP

update interval, in seconds. It'sinadvisable to set it exceeding 1month (2592000 seconds).Range = 0 to 2592000 secondsDefault = 86400 secondsMib name:acSysNTPUpdateIntervalINI Name:NTPUPDATEINTERVALProfile name: Digital NetworkProfile

Day LightSaving Time

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Mode Enum:Disable(0), Enable(1)

Instant 0 Determines whether to enablethe time ajustment to day lightsaving time while update time

from NTP serverMib name:acSysDayLightSavingTimeModeINI Name:DAYLIGHTSAVINGTIMEENABLEProfile name: Digital NetworkProfile

Offset (min) Integer0-120

Instant 60 whenDayLightSavingTimeEnable isEnable, this parametes

determine the fix size inminutes: 0-120Mib name:acSysDayLightSavingTimeOffsetINI Name:DAYLIGHTSAVINGTIMEOFFSETProfile name: Digital NetworkProfile

Start(mo:dd:hh:mm)


Instant This parameter defines the dateand time of starting day light

time in current year.Format mo:dd:hh:mmMib name:acSysDayLightSavingTimeStartINI Name:DAYLIGHTSAVINGTIMESTARTProfile name: Digital NetworkProfile

End(mo:dd:hh:mm)


Instant This parameter defines the dateand time of ending day lighttime in current year.Format mo:dd:hh:mm.

Mib name:acSysDayLightSavingTimeEndINI Name:DAYLIGHTSAVINGTIMEENDProfile name: Digital NetworkProfile

STUN

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

STUN Enable Enum:Disable(0), Enable(1)

Offline 0 This parameter is used toenable the STUN module, usedfor NAT traversal of UDP

packets.Mib name: acSysSTUNEnableINI Name: ENABLESTUNProfile name: Digital NetworkProfile

Primary ServerIP

IP Address Offline 0 Defines the primary STUNServer IP address.Range = Legal IP addressMib name:acSysSTUNPrimaryServerIPINI Name:STUNSERVERPRIMARYIP


SecondaryServer IP

IP Address Offline 0 Defines the secondary STUNserver IP address.Range = Legal IP addressMib name:acSysSTUNSecondaryServerIPINI Name:STUNSERVERSECONDARYIPProfile name: Digital NetworkProfile

Binding Life

Time

Integer

0-2147483647

Offline 30 This parameter is used to

define the NAT binding lifetime,in seconds. STUN refreshes thebinding information after thistime expires.Range = 0 - 2592000Mib name:acSysSTUNBindingLifeTimeINI Name:NATBINDINGDEFAULTTIMEOUTProfile name: Digital NetworkProfile

System NATType

Enum:stunDisabled(-1), none(0),fullCone(1), restricted(2),

portRestricted(3),symmetric(4),

symmetricFireWall(5),blocked(6), unknown(7),

natIdentificationInProgress(10)

Read-Only 0 Identified NAT type.;-1 - STUNclient is disabled;0 - None;1 -FullCone;2 - Restricted;3 -PortRestricted;4 - Symmetric;5- SymmetricFireWall;6 -Blocked;7 - Unknown;10 - NATidentification in progressMib name: acSysNATTypeProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Keep Alive TrapPort

Integer0-65334

Instant 162 The port to which the keep alivetraps are sent to.Mib name:

acSysSNMPKeepAliveTrapPortINI Name:KEEPALIVETRAPPORTProfile name: Digital NetworkProfile

DHCP

DHCP Enable Enum:Disable(0), Enable(1)

Online 0 Enables/disables DHCPsupport.


After the gateway is poweredup, it attempts to communicatewith a BootP server. If a BootPserver does not respond and ifDHCP is enabled, the gatewayattempts to obtain its IPaddress and other networkparameters from the DHCPserver.Note that throughout the DHCPprocedure, the BootP/TFTPapplication must be

deactivated. If it isn?tdeactivated, the gatewayreceives a response from theBootP server instead of theDHCP server.For additional information onDHCP, refer to the productdocumentation.Note: DHCPEnable is a special?Hidden? parameter. Oncedefined and saved in flashmemory, its assigned valuedoesn?t revert to its default

even if the parameter doesn'tappear in the INI file.Mib name:acSysIPDHCPEnableINI Name: DHCPENABLEProfile name: Digital NetworkProfile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

DHCP SpeedFactor

Integer0-10

Offline 1 Controls the DHCP renewalspeed. When set to 0, theDHCP lease renewal is

disabled. Otherwise, therenewal time is divided by thisfactor. Some DHCP-enabledrouters perform better when setto 4.

0 = Disable DHCP1 = Normal2 to 10 = FastMib name:acSysIPDHCPSpeedFactorINI Name:DHCPSPEEDFACTORProfile name: Digital NetworkProfile

2.38.3 Tab: NFS Settings

Frame: System Setting Provisioning (TP-6310), Tab: NFS Settings

ParameterName


DefaultValue

Description

Index Integer0-15 NA 0 Index Field for line. Internal parameter.Mib name: acSysNFSIndexINI Name: NFSSERVERS_INDEXProfile name: Not Profiled

Status Enum: NA 0 ROWSTATUS field for line. Internalparameter.Mib name: acSysNFSRowStatusProfile name: Digital NFS Profile

Host Or IP StringUp to 40 chars.

Online The domain name or IP address of the NFSserver. If a domain name is provided, then aDNS server must be configured.Mib name: acSysNFSHostOrIP

INI Name: NFSSERVERS_HOSTORIPProfile name: Digital NFS Profile

Root Path StringUp to 100 chars.

Online Path to the root of the exported file system.Mib name: acSysNFSRootPathINI Name: NFSSERVERS_ROOTPATHProfile name: Digital NFS Profile

Nfs Version Enum:v2(2), v3(3)

Online 3 NFS version to use with this remote filesystem, 2 or 3 (default).Mib name: acSysNFSNfsVersionINI Name: NFSSERVERS_NFSVERSIONProfile name: Digital NFS Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Auth Type Enum:null(0), unix(1)

Online 1 Identifies the authentication method usedwith this remote file system, 0 forAUTH_NULL, 1 for AUTH_UNIX (default).

Mib name: acSysNFSAuthTypeINI Name: NFSSERVERS_AUTHTYPEProfile name: Digital NFS Profile

UID Integer0-2147483647

Online 0 User ID used in authentication if usingAUTH_UNIX. The default is 0.Mib name: acSysNFSUIDINI Name: NFSSERVERS_UIDProfile name: Digital NFS Profile

GID Integer0-2147483647

Online 1 Group ID used in authentication if usingAUTH_UNIX. The default is 1.Mib name: acSysNFSGID

INI Name: NFSSERVERS_GIDProfile name: Digital NFS Profile

Vlan Type Enum:oam(0), media(1)

Online 0 The VLAN, OAM(0) or Media(1), to usewhen accessing this remote file system.The default is to use;the media VLAN. Thisparameters applies only if multiple IPaddresses are configured on this board.Mib name: acSysNFSVlanTypeINI Name: NFSSERVERS_VLANTYPEProfile name: Digital NFS Profile

2.38.4 Tab: Security Settings

Frame: System Setting Provisioning (TP-6310), Tab: Securi ty Settings

ParameterName


DefaultValue

Description

TLS &Certificates

TLSVersion

Enum: Online 0 This parameter defines the supportedversions of SSL/TLS.When set to 0, SSL/TLS handshakes

always start with SSL 2.0 and switch toTLS 1.0 if both peers support it.When set to 1, TLS 1.0 is the only versionsupported; clients attempting to contactthe device using SSL 2.0 will be rejected. Possible values:0 = SSL 2.0, SSL 3.0, and TLS 1.0 aresupported (default)1 = TLS 1.0 will always be usedMib name: acSysSecurityTLSVersionINI Name: TLSVERSIONProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

HTTPSCipherString


Offline 0 Requires client certificates for HTTPSconnection. The client certificate must bepreloaded on the gateway, and its

matching private key must be installed onthe managing computer. Time and datemust be correctly set on the gateway, forthe client certificate to be verified.Mib name: acSysWEBHTTPSCipherStringINI Name: HTTPSCIPHERSTRINGProfile name: Not Profiled

HTTPSRequireClient

Certificate


Online 0 Requires client certificates for HTTPSconnection.The client certificate must be preloadedon the gateway, and its matching privatekey must be installed on the managing

computer.Time and date must be correctly set onthe gateway, for the client certificate to beverified.Mib name:acSysSecurityHTTPSRequireClientCertificateINI Name:HTTPSREQUIRECLIENTCERTIFICATEProfile name: Digital Security Profile

AUPDVerify

Certificates


Offline 0 This parameter configures theAutoUpdate facility to verify server

certificates when using HTTPS.Mib name:acSysSecurityAUPDVerifyCertificatesINI Name: AUPDVERIFYCERTIFICATESProfile name: Digital Security Profile

OCSP

OCSPEnable


Instant 0 Enables or disables certificate checkingvia OCSP.Mib name: acSysSecurityOcspEnableINI Name: OCSPENABLEProfile name: Digital Security Profile

OCSPServer IP

Type

inetAddressType Instant This parameter defines the OCSP server'sIP address Type.0 - unknown1 - IPv42 - IPv6Mib name:acSysSecurityOcspServerIPTypeProfile name: Digital Security Profile

OCSPServer IP

StringUp to chars.

Instant This parameter defines the OCSP server'sIP address.Range = Legal IP addressMib name: acSysSecurityOcspServerIPINI Name: OCSPSERVERIP


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description


Type

inetAddressType Instant This parameter defines the OCSPsecondary server's IP address Type.0 - unknown

1 - IPv42 - IPv6Mib name:acSysSecurityOcspSecondaryServerIPTypeProfile name: Not Profiled


StringUp to chars.

Instant This parameter defines the OCSPsecondary server IP address.Range = Legal IP addressMib name:acSysSecurityOcspSecondaryServerIPINI Name:

OCSPSECONDARYSERVERIPProfile name: Not Profiled

OCSPServer Port

Integer1-32767

Instant 2560 This parameter defines the OCSP server'sTCP port number.Range = 1 to 32767.Mib name: acSysSecurityOcspServerPortINI Name: OCSPSERVERPORTProfile name: Digital Security Profile

OCSPDefault

Response

Enum:rejectPeerCertificate(

0),allowPeerCertificate(

1)

Instant 0 Determines default OCSP behavior whenthe server cannot be contacted.0 = reject peer certificate.1 = allow peer certificate.

Mib name:acSysSecurityOcspDefaultResponseINI Name: OCSPDEFAULTRESPONSEProfile name: Digital Security Profile

RequireStrict

Certification


Online 0 Verify the certification strictly - for SSLMib name:acSysSecurityRequireStrictCertificationINI Name: REQUIRESTRICTCERTProfile name: Digital Security Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.38.5 Tab: License

Frame: System Setting Provis ioning (TP-6310), Tab: L icense

ParameterName


DefaultValue

Description

SupportedFeatures


Read-Only List of all avtivated features.Mib name: acSysLicenseKeyActiveListProfile name: Not Profiled

2.39 Frame: System Sett ings Parameters (TP-6310)


Frame: System Settings Parameters (TP-6310), Tab: General Info

ParameterName


DefaultValue

Description

TransmissionType

Enum:none(0),

opticalSonetSdh(1),copperDs3(2),

copperE1Ds1(3)

Offline 0 Sets the PSTN Transmission type for theboard: optical SONET / SDH or copperDS3.Mib name: acSysTransmissionTypeINI Name: PSTNTRANSMISSIONTYPEProfile name: Digital System SettingsProfile

7/23/2019 LTRT-32105 Mediant 3000




2.40 Frame: System Sett ings Parameters (TP-8410)


Frame: System Settings Parameters (TP-8410), Tab: General Info

ParameterName


DefaultValue

Description

TransmissionType

Enum:none(0),

opticalSonetSdh(1),copperDs3(2),

copperE1Ds1(3)

Offline 0 Sets the PSTN Transmission type for theboard: optical SONET / SDH or copperDS3.Mib name: acSysTransmissionTypeINI Name: PSTNTRANSMISSIONTYPEProfile name: Digital System Settings

Profile

2.41 Frame: TDM Parameters Provisioning (TP-6310)

2.41.1 Tab: TDM

Frame: TDM Parameters Provisioning (TP-6310), Tab: TDM

Parameter

Name

Type Provisioning

Type

Default

Value

Description

TDM Bus

TDM BusType

Enum:MVIP-BUS(0), SC-

BUS(1), USE-FRAMERS(2),

QSLAC-BUS(3),USE-H110-

BUS(4), USE-EXT-BUS(5),

ANALOG-BUS(6),

USE-PSTN-SW-ONLY(8)

Offline 0 Selects the TDM bus interface to be used(only one TDM bus interface can beenabled at one time although more thanone can physically exist on the board).Range:0 = acMVIP_BUS1 = acSC_BUS2 = acFRAMERS4 = acH100_BUS

5 = EXT TDM6 = Analog8 = SW Pstn

Default:TP-1610 and TP-2810 = 2; TPM-1100 = 5;TP-260 = 1Mib name: acSysTDMBusTypeINI Name: TDMBUSTYPEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

TDM BusSpeed

Enum:acTDMBusSpeed-

2Mbps(0),

acTDMBusSpeed-4Mbps(2),

acTDMBusSpeed-8Mbps(3),

acTDMBusSpeed-16Mbps(4)

Offline 0 Selects the TDM bus speed according tothe Bus Type as follows:SC = 0/2/3

H.110/H.100 = 3MVIP = 0Where:

0 = 2048 kbps2 = 4096 kbps3 = 8192 kbps4 = 16384 kbpsDefault: TP-260 = 2; All other boards = 3Mib name: acSysTDMBusSpeedINI Name: TDMBUSSPEEDProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.41.2 Tab: Digital PCM Settings

Frame: TDM Parameters Provis ioning (TP-6310), Tab: Dig ital PCM Settings

ParameterName


DefaultValue

Description

PCM LawSelect

Enum:MuLaw(3),ALaw(1),

Automatic(0)

Offline 0 Selects the type of PCM companding law ininput/output TDM bus (TDM bus is definedusing the TDMBusType parameter).

1 = A-law3 = Mu-LawMib name: acSysPCMLawSelectINI Name: PCMLAWSELECTProfile name: Digital Telephony Profile

Idle PCMPattern

Integer0-255

Offline 0 Defines the PCM pattern applied to theE1/T1 timeslot (B-channel) when thechannel is idle.Default:0xFF if PCMLawSelect is Mu-Law0xD5 if PCMLawSelect is A-LawRange = 0x00 to 0xFFMib name: acSysPCMIdlePatternINI Name: IDLEPCMPATTERNProfile name: Digital Telephony Profile

Idle ABCDPattern

Integer0-255

Offline 0 Defines the ABCD (CAS) pattern to beapplied on the signaling bus before it is

changed by the user or the PSTN protocol.This is only relevant when using PSTNinterface with CAS protocols.Range = 0x0 to 0xFMib name: acSysPCMIdleABCDPatternINI Name: IDLEABCDPATTERNProfile name: Digital Telephony Profile

Serial PortAudit Interval

Min

Integer0-60

Offline 0 Interval timeout in minutes, of the SerialPort audit. In case of 0 value, the audit isn'trunning.Mib name:acSysPCMSerialPortAuditIntervalMinINI Name:SERIALPORTAUDITINTERVALMINProfile name: Digital Telephony Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.41.3 Tab: System Timing

Frame: TDM Parameters Provis ioning (TP-6310), Tab: System Timing

ParameterName


DefaultValue

Description

ClockParameters

TDM Bus ClockSource

Enum:Internal(1), MVIP(3),Network(4), H110-A(8), H110-B(9),

netReference1(10),NetReference2(11),

SC-2M(12), SC-

4M(13), SC-8M(14),BITS(15), Network-

b(16), ATM-OC3(17), ATM-

OC3-B(18), ATM-OC12(19), Network-

DS3-1(20),Network-DS3-2(21),Network-DS3-3(22)

Online 1 Selects the clock source on which theboard synchronizes.1 = Local oscillator3 = MVIP4 = PSTN Network8 = H.110A9 = H.110B

10 = NetRef111 = NetRef212 = SC2M13 = SC4M14 = SC8M15 = BITS16 = Network-B17 = ATM-OC318 = ATM-OC3-B19 = ATM-OC1220 = Network-DS3-121 = Network-DS3-222 = Network-DS3-3

Default = 1TP-1610 = 3

In case of MP5XX the parameter isOffline.Mib name: acSysTDMClockSourceINI Name: TDMBUSCLOCKSOURCEProfile name: Digital Telephony Profile

TDM BusEnable Fall

Back

Enum:manual(0),autoNon-

Revertive(1), auto-

Revertive(2)

Online 0 Defines the auto fallback of the clock.Range:0 = Manual1 = Auto Non-Revertive

2 = Auto RevertiveMib name:acSysTDMClockEnableFallBackINI Name:TDMBUSENABLEFALLBACKProfile name: Digital Telephony Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

TDM BusFallback Clock

Enum:Network(4), H110-A(8), H110-B(9),

NetReference1(10),NetReference2(11)

Online 4 Selects the fallback clock source onwhich board synchronizes in the eventof clock failure.

4 = PSTN Network8 = H.110A9 = H.110B10 = NetRef111 = NetRef2Mib name:acSysTDMClockFallbackClockINI Name:TDMBUSFALLBACKCLOCKProfile name: Digital Telephony Profile

TDM BusMaster/Slave

Selection

Enum:acTDMBusSlaveMo

de(0),acTDMBusMasterM

ode(1),acH110BusSeconda

ryMasterMode(2)

Online 0 Sets SC/MVIP/H.100/H.110 to either:

0 = Slave mode (another board in thesystem must supply the clock to theTDM bus) or Master mode (the boardis the clock source for the TDM bus)or Secondary Master mode (forH100/H110 Bus only).1 = H110A Master in Master mode2 = H.110B MasterMib name:acSysTDMClockMasterSlaveSelectionINI Name:TDMBUSMASTERSLAVESELECTIO

NProfile name: Digital Telephony Profile

TDM Bus NetReference

Speed

Enum:acTH110BusNetRef

Speed-8khz(0),acTH110BusNetRef Speed-1544khz(1),acTH110BusNetRef Speed-20488khz(2)

Online 0 Determines the NetRef frequency (forboth generation and synchronization).0 = 8 kHz1 = 1.544 MHz2 = 2.048 MHzMib name:acSysTDMClockNetRefSpeedINI Name: TDMBUSNETREFSPEEDProfile name: Digital Telephony Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

TDM Bus LocalReference

Integer0-256

Online 0 When the clock source is set toNetwork, this parameter selects theTrunk ID to be used as the clock

synchronization source of the board.When using H.110/H.100 bus, thisparameter also selects the trunk usedas the clock source for the NetRefclock generation (in this case, theclock source must not be set toNetwork.Range = 0 to (MAX_TRUNK _NUM-1)Mib name:acSysTDMClockLocalReferenceINI Name:TDMBUSLOCALREFERENCEProfile name: Digital Telephony Profile

TDM Bus AutoFall BackEnable


Offline 0 Enables or disables the PSTN trunkauto-fallback feature.Mib name:acSysTDMClockAutoFallBackEnableINI Name:TDMBUSPSTNAUTOCLOCKENABLEProfile name: Digital Telephony Profile

TDM Bus AutoFall BackReverting

Enable


Offline 0 Enables/disables the PSTN trunkauto-fallback reverting feature.Mib name:

acSysTDMClockAutoFallBackRevertingEnableINI Name:TDMBUSPSTNAUTOCLOCKREVERTINGENABLEProfile name: Digital Telephony Profile

7/23/2019 LTRT-32105 Mediant 3000




2.42 Frame: TDM Parameters Provisioning (TP-8410)

2.42.1 Tab: TDM

Frame: TDM Parameters Provisioning (TP-8410), Tab: TDM

ParameterName


DefaultValue

Description

TDM Bus

TDM BusType

Enum:MVIP-BUS(0), SC-

BUS(1), USE-FRAMERS(2),

QSLAC-BUS(3),USE-H110-BUS(4), USE-EXT-BUS(5),

ANALOG-BUS(6),USE-PSTN-SW-

ONLY(8)

Offline 0 Selects the TDM bus interface to be used(only one TDM bus interface can beenabled at one time although more thanone can physically exist on the board).

Range:0 = acMVIP_BUS1 = acSC_BUS2 = acFRAMERS4 = acH100_BUS5 = EXT TDM6 = Analog8 = SW Pstn

Default:TP-1610 and TP-2810 = 2; TPM-1100 = 5;TP-260 = 1Mib name: acSysTDMBusType

INI Name: TDMBUSTYPEProfile name: Not Profiled

TDM BusSpeed

Enum:acTDMBusSpeed-

2Mbps(0),acTDMBusSpeed-



16Mbps(4)

Offline 0 Selects the TDM bus speed according tothe Bus Type as follows:SC = 0/2/3H.110/H.100 = 3MVIP = 0Where:

0 = 2048 kbps2 = 4096 kbps3 = 8192 kbps

4 = 16384 kbpsDefault: TP-260 = 2; All other boards = 3Mib name: acSysTDMBusSpeedINI Name: TDMBUSSPEEDProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.42.2 Tab: Digital PCM Settings

Frame: TDM Parameters Provis ioning (TP-8410), Tab: Dig ital PCM Settings

ParameterName


DefaultValue

Description

PCM LawSelect

Enum:MuLaw(3),ALaw(1),

Automatic(0)

Offline 0 Selects the type of PCM companding law ininput/output TDM bus (TDM bus is definedusing the TDMBusType parameter).

1 = A-law3 = Mu-LawMib name: acSysPCMLawSelectINI Name: PCMLAWSELECTProfile name: Digital Telephony Profile

Idle PCMPattern

Integer0-255

Offline 0 Defines the PCM pattern applied to theE1/T1 timeslot (B-channel) when thechannel is idle.Default:0xFF if PCMLawSelect is Mu-Law0xD5 if PCMLawSelect is A-LawRange = 0x00 to 0xFFMib name: acSysPCMIdlePatternINI Name: IDLEPCMPATTERNProfile name: Digital Telephony Profile

Idle ABCDPattern

Integer0-255

Offline 0 Defines the ABCD (CAS) pattern to beapplied on the signaling bus before it is

changed by the user or the PSTN protocol.This is only relevant when using PSTNinterface with CAS protocols.Range = 0x0 to 0xFMib name: acSysPCMIdleABCDPatternINI Name: IDLEABCDPATTERNProfile name: Digital Telephony Profile

Serial PortAudit Interval

Min

Integer0-60

Offline 0 Interval timeout in minutes, of the SerialPort audit. In case of 0 value, the audit isn'trunning.Mib name:acSysPCMSerialPortAuditIntervalMinINI Name:SERIALPORTAUDITINTERVALMINProfile name: Digital Telephony Profile

7/23/2019 LTRT-32105 Mediant 3000




2.42.3 Tab: System Timing

Frame: TDM Parameters Provis ioning (TP-8410), Tab: System Timing

ParameterName


DefaultValue

Description

Mode Enum:standAlon

e(0),external(1)

,lineSync(2

)

Online 0 Determines the PSTN Timing synchonizationmode of the Gateway. One of the following values:TM_External_MODE(1)-External Timing mode - use the SAT trunksCentralized Line Timing to synchronize theGateway with one of the PSTN interfaces.TM_LineSync_MODE(2)-Distributed Line Timing mode (for the 1610boards)- without using the SAT timing module.

TM_Standalone_MODE(0)-Non-synchronized mode - each board or TPM issynchronized internally from one of the PSTNinterfaces without using the SAT timing module.Mib name: acSysTimingModeINI Name: TMMODEProfile name: Digital Timing Module Profile

ClockParameters

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

TDM BusClock

Source

Enum:Internal(1),MVIP(3),

Network(4), H110-

A(8),H110-B(9),

netReference1(10),NetReference2(11),

SC-2M(12),

SC-4M(13),

SC-8M(14),

BITS(15),Network-

b(16),ATM-

OC3(17),ATM-OC3-

B(18),ATM-

OC12(19),Network-

DS3-1(20),

Network-DS3-2(21),

Network-DS3-3(22)

Online 1 Selects the clock source on which the boardsynchronizes.1 = Local oscillator3 = MVIP4 = PSTN Network8 = H.110A9 = H.110B10 = NetRef111 = NetRef212 = SC2M13 = SC4M14 = SC8M15 = BITS16 = Network-B17 = ATM-OC318 = ATM-OC3-B19 = ATM-OC1220 = Network-DS3-121 = Network-DS3-222 = Network-DS3-3Default = 1TP-1610 = 3

In case of MP5XX the parameter is Offline.Mib name: acSysTDMClockSourceINI Name: TDMBUSCLOCKSOURCEProfile name: Digital Telephony Profile

TDM BusEnable Fall

Back

Enum:manual(0),autoNon-Revertive(1), auto-

Revertive(

2)

Online 0 Defines the auto fallback of the clock.Range:0 = Manual1 = Auto Non-Revertive2 = Auto RevertiveMib name: acSysTDMClockEnableFallBack

INI Name: TDMBUSENABLEFALLBACKProfile name: Digital Telephony Profile

TDM BusFallback

Clock

Enum:Network(4), H110-

A(8),H110-B(9),

NetReference1(10),NetReference2(11)

Online 4 Selects the fallback clock source on which boardsynchronizes in the event of clock failure.4 = PSTN Network8 = H.110A9 = H.110B10 = NetRef111 = NetRef2Mib name: acSysTDMClockFallbackClockINI Name: TDMBUSFALLBACKCLOCKProfile name: Digital Telephony Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

TDM BusBits

Reference

Integer1-2

Online 1 Configures the BITS clock reference when theboard source clock is set to BITS and Fallback isset to manual or non-revertive.

1 = REF_12 = REF_2Mib name: acSysTDMClockBitsReferenceINI Name: TDMBITSCLOCKREFERENCEProfile name: Digital Telephony Profile

TDM BusPLL Out Of

Range

Enum:Oor-9-

2to12ppm(0), Oor-

40to52ppm(1), Oor-

100to130ppm(2),Oor-

64to83ppm(3), Oor-

13-8to18ppm(

4), Oor-24-

6to32ppm(5), Oor-

36-6to47-5ppm(6),

Oor-52to67-5ppm(7)

Online 0 Determines the valid PPM range outside theStratum 3 standard. This parameter is onlyrelevant for the TP8410 on the Mediant 3000. Thisparameter is enabled whenbspTimingModuleCfgTimingMode is set toTM_External_MODE(1).

One of the following possible values:OOR_9_2to12ppm(0),OOR_40to52ppm(1),OOR_100to130ppm(2),OOR_64to83ppm(3),OOR_13_8to18ppm(4),OOR_24_6to32ppm(5),OOR_36_6to47_5ppm(6),OOR_52to67_5ppm(7)Mib name: acSysTDMClockPLLOutOfRangeINI Name: PLLOUTOFRANGEProfile name: Digital Telephony Profile

TDM BusMaster/Slave Selection

Enum:acTDMBusSlaveMo

de(0),acTDMBusMasterM

ode(1),acH110BusSecondar

yMasterMode(2)

Online 0 Sets SC/MVIP/H.100/H.110 to either:

0 = Slave mode (another board in the systemmust supply the clock to the TDM bus) or Mastermode (the board is the clock source for the TDMbus) or Secondary Master mode (for H100/H110Bus only).1 = H110A Master in Master mode2 = H.110B Master

Mib name: acSysTDMClockMasterSlaveSelectionINI Name: TDMBUSMASTERSLAVESELECTIONProfile name: Digital Telephony Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

TDM BusNet

Reference

Speed

Enum:acTH110BusNetRefS

peed-8khz(0),

acTH110BusNetRefS

peed-1544khz(1

),acTH110BusNetRefS

peed-20488khz(

2)

Online 0 Determines the NetRef frequency (for bothgeneration and synchronization).0 = 8 kHz

1 = 1.544 MHz2 = 2.048 MHzMib name: acSysTDMClockNetRefSpeedINI Name: TDMBUSNETREFSPEEDProfile name: Digital Telephony Profile

TDM BusLocal

Reference

Integer0-256

Online 0 When the clock source is set to Network, thisparameter selects the Trunk ID to be used as theclock synchronization source of the board.When using H.110/H.100 bus, this parameter alsoselects the trunk used as the clock source for theNetRef clock generation (in this case, the clocksource must not be set to Network.Range = 0 to (MAX_TRUNK _NUM-1)Mib name: acSysTDMClockLocalReferenceINI Name: TDMBUSLOCALREFERENCEProfile name: Digital Telephony Profile

TDM Bus

Auto FallBack Enable

Enum:

disable(0),enable(1)

Offline 0 Enables or disables the PSTN trunk auto-fallback

feature.Mib name: acSysTDMClockAutoFallBackEnableINI Name: TDMBUSPSTNAUTOCLOCKENABLEProfile name: Digital Telephony Profile

TDM BusAuto Fall

BackReverting

Enable


Offline 0 Enables/disables the PSTN trunk auto-fallbackreverting feature.Mib name:acSysTDMClockAutoFallBackRevertingEnableINI Name:TDMBUSPSTNAUTOCLOCKREVERTINGENABLEProfile name: Digital Telephony Profile

TimingModule

ValidationTime (min)

Integer0-15

Online 1 Reference validation time. Applicable for Externaltiming and Line timing timing references. Range: 0- 15 minutes. Resolution: 1 minute.Mib name: acSysTimingValidationTimeINI Name: TMREFERENCEVALIDATIONTIMEProfile name: Digital Timing Module Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

External IFType

Enum:E1CRC4(0

),

E1CAS(1),E1FAS(2),T1D4(3),

T1ESF(4),T12(5)

Online 0 Defines the external line reference (BITS)transmission formatMib name: acSysTimingExternalIFType

INI Name: TMEXTERNALIFTYPEProfile name: Digital Timing Module Profile

Loop BackRef1

Enum:LoopDisab

le(0),LoopEnabl

e(1)

Online 0 Enables loopback state, by connecting Rx pathtowards Tx path.Mib name: acSysTimingLoopBackRef1INI Name: TMLOOPBACKEXTERNALREF1Profile name: Digital Timing Module Profile

Loop Back

Ref2

Enum:

LoopDisable(0),LoopEnabl

e(1)

Online 0 Enables loopback state, by connecting Rx path

towards Tx path.Mib name: acSysTimingLoopBackRef2INI Name: TMLOOPBACKEXTERNALREF2Profile name: Digital Timing Module Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.43 Frame: Trunk Parameters Provisioning (TP-6310)


Frame: Trunk Parameters Provisioning (TP-6310), Tab: General Settings

ParameterName


DefaultValue

Description

ProtocolType

Enum:NONE(0),

E1EuroISDN(1), T1Cas(2),

T1RawCas(3),T1Transparent(

4),E1Transparent

31(5),E1Transparent

30(6),E1Mfcr2(7),E1CasR2(8),

E1RawCAS(9),T1-

NI2ISDN(10),T1-

4EssISDN(11),T1-5Ess-9-

ISDN(12), T1-5Ess-10-

ISDN(13), T1-Dms100-

ISDN(14), J1-TRANSPARENT(15), T1-NTT-ISDN(16), E1-

AUSTEL-ISDN(17), E1-HKT-ISDN(18),

E1-KOR-ISDN(19), T1-

HKT-ISDN(20),E1-QSIG(21),

E1-TNZ-22(22),T1-EXTRA-23(23), T1-

IUA(28), E1-IUA(29), E1-

EXTRA-30(30),E1-FRENCH-

VN3-ISDN(31),T1-EXTRA-

32(32),EXTRA-33(33),

T1-EURO-

Online 0 Used to set the PSTN protocol to be usedfor this trunk. Relevant only whenTDMBusType=acFRAMERS (2).Either:NONE = 0E1_EURO_ISDN = 1

T1_CAS = 2T1_RAW_CAS = 3T1_TRANSPARENT = 4E1_TRANSPARENT_31 = 5E1_TRANSPARENT_30 = 6E1_MFCR2 = 7E1_CAS = 8E1_RAW_CAS = 9T1_NI2_ISDN = 10T1_4ESS_ISDN = 11T1_5ESS_9_ISDN = 12T1_5ESS_10_ISDN = 13T1_DMS100_ISDN = 14

J1_TRANSPARENT = 15T1_NTT_ISDN = 16E1_AUSTEL_ISDN = 17E1_HKT_ISDN = 18E1_KOR_ISDN = 19T1_HKT_ISDN = 20E1_QSIG = 21E1_TNZ_ISDN = 22T1_QSIG = 23T1_IUA = 28E1_IUA = 29E1_FRENCH_VN6_ISDN = 30E1_FRENCH_VN3_ISDN = 31T1_EURO_ISDN = 34T1_DMS100_MERIDIAN_ISDN = 35T1_NI1_ISDN = 36E1_DUA = 37E1_Q931_PACKETS = 38T1_Q931_PACKETS = 39E1_NI2_ISDN = 40E1-CAS-R15 = 41V5 = 43BRI-EURO-ISDN = 50BRI-NI-2 = 51BRI-DMS100 = 52BRI-5ESS = 53BRI-QSIG = 54

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

ISDN(34), T1-DMS100-

MERIDIAN-

ISDN(35), T1-NI1-ISDN(36),E1-DUA(37),

E1-Q931-PACKETS(38),

T1-Q931-PACKETS(39),

E1-NI2-ISDN(40), E1-CAS-R15(41),V5(43), BRI-

EURO-ISDN(50), BRI-

NI-2(51), BRI-DMS100(52),

BRI-5ESS(53),BRI-QSIG(54),BRI-VNG(55),BRI-NTT(56),BRI-IUA(57)

BRI-VNG = 55BRI-NTT = 56BRI-IUA = 57.

Mib name: acTrunkProtocolTypeINI Name: PROTOCOLTYPEProfile name: Trunk Profile

Clock Master Enum:acCLOCK-MASTER-OFF(0),

acCLOCK-

MASTER-ON(1)

Online 0 Used to select the trunk clock source.

0 = acCLOCK_MASTER_OFF (clockrecovered from the line)1 = acCLOCK_MASTER_ON (the trunk

clock source is provided by theinternal/TDM bus clock source dependingon the parameter TDM Bus Clock Source)Mib name: acTrunkClockMasterINI Name: CLOCKMASTERProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

FramingMethod

Enum:EXTENDED-

SUPER-

FRAME(0),SUPER-

FRAME(1), E1-FRAMING-DDF(2), E1-FRAMING-

MFF-CRC4(3),E1-FRAMING-MFF-CRC4-EXT(4), T1-FRAMING-F4(6), T1-FRAMING-F12(7), T1-FRAMING-ESF(8), T1-FRAMING-

ESF-CRC6 (9),T1-FRAMING-F72(10), T1-FRAMING-ESF-CRC6-

JT(11)

Online 0 Selects the Framing method to be used forthis trunk.Mib name: acTrunkFramingMethodProfile name: Trunk Profile

Line Code Enum:acB8ZS(0),

acAMI(1),acHDB3(2)

Online 0 Use to select line code. B8ZS or AMI forT1 spans and HDB3 or AMI for E1 spans.

0 = Use B8ZS line code (for T1 trunks only= default)1 = Use AMI line code (for T1 or E1 trunks)2 = Use HDB3 line code (for E1 trunksonly)Mib name: acTrunkLineCodeINI Name: LINECODEProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Trace Level Enum:acNO-

TRACE(0),

acFULL-ISDN-TRACE(1),acLAYER3-

ISDN-TRACE(2),

acONLY-ISDN-Q931-MSGS-

TRACE(3),acLAYER3-

ISDN-TRACE-NO-

DUPLICATION(4), acFULL-

ISDN-TRACE-WITH-

DUPLICATION(5), acISDN-Q931-RAW-

DATA-TRACE(6),

acISDN-Q921-RAW-DATA-TRACE(7),

acISDN-Q931-Q921-RAW-

DATA-TRACE(8),

acSS7-MTP2(10),

acSS7-MTP2-AND-

APPLI(11),acSS7-MTP2-

SL-L3-NO-MSU(12),

acSS7-AAL(15)

Online 0 Defines the Trace level:acNO_TRACE = 0acFULL_ISDN_TRACE = 1acLAYER3_ISDN_TRACE = 2acONLY_ISDN_Q931_MSGS_TRACE = 3acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4acFULL_ISDN_TRACE_WITH_DUPLICATION = 5acISDN_Q931_RAW_DATA_TRACE = 6acISDN_Q921_RAW_DATA_TRACE = 7acISDN_Q931_Q921_RAW_DATA_TRACE = 8acSS7_MTP2 = 10acSS7_MTP2_AND_APPLI = 11acSS7_MTP2_SL_L3_NO_MSU = 12acSS7_AAL = 15Mib name: acTrunkTraceLevelINI Name: TRACELEVELProfile name: Trunk Profile

Dial PlanName


Instant 0 Sets the Dial Plan name that will be usedon the specific trunk.

Range = string 11 charactersMib name: acTrunkDialPlanNameINI Name: CASTRUNKDIALPLANNAMEProfile name: Trunk Profile

Auto ClockPriority

Integer0-100

Online 0 Defines the trunk priority for auto-clockfallback (Priority range: 0 - 100 (0 - 99 arepriority settings, in which 0 = highestPriority and is the default setting; 100 = Donot choose this trunk)Mib name: acTrunkAutoClockPriorityINI Name:

AUTOCLOCKTRUNKPRIORITYProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.43.2 Tab: ISDN Settings

Frame: Trunk Parameters Provisioning (TP-6310), Tab: ISDN Settings


DefaultValue

Description

Common

Termination Side Enum:acUSER-

TERMINATION-SIDE(0),

acNETWORK-

TERMINATION-SIDE(1)

Online 0 Used to set the ISDN Termination toeither User or Network. Termination =For ISDN only.User side = 0Network side = 1Mib name:acTrunkISDNCommonTerminationSideINI Name: TERMINATIONSIDEProfile name: Trunk Profile

Q931 LayerResponse

Behavior;NOSTATUS ON

UNKNOWN IE;NOSTATUS ON INVOP IE;ACCEPT

UNKNOWN FACIE;SEND USER

CONNECTACK;EXPLICITINTERFACE

ID;ALWAYSEXPLICIT;ACCEPTMU LAW;EXPLICIT

PRESSCREENING;STAT

USINCOMPATIBLESTATE;STATUS

ERRORCAUSE;ACCEPT A

LAW;RESTARTINDICATION;FORCED RESTART

IntegerBitmaskBitmap-

0x06F8A87

Online 0 Bit-field used to determine severalbehavior options, which influence howthe Q.931 protocol behaves.Mib name:acTrunkISDNCommonQ931LayerResponseBehaviorINI Name: ISDNIBEHAVIORProfile name: Trunk Profile

Duplicate Q931Buff Mode

Integer0-255

Online 0 Activates / de-activates delivery of rawQ.931 messages. Refer to the VoPLibdocumentation ('ISDN FlexibleBehavior').Mib name:acTrunkISDNCommonDuplicateQ931Buf fModeINI Name:ISDNDUPLICATEQ931BUFFMODEProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000





DefaultValue

Description

IUA Interface ID Integer-1-

2147483647

Read-Only -1 Defines the IUA trunk interface ID value -unsigned integer - in RFC 3057 -SIGTRAN. Default = 0xFFFFFFFF.

Mib name:acTrunkISDNCommonIuaInterfaceIdProfile name: Not Profiled

Incoming CallsBehavior;DATA

CONN RS;VOICECONN RS;CHAN

ID IN FIRSTRS;USER SETUPACK;CHAN ID IN

CALLPROC;PROGR IND

IN SETUP ACK


0x013860

Online 0 This is the bit-field used to determineseveral behavior options that influencehow the ISDN Stack INCOMING callsbehave. Refer to the Appendix A.8 'ISDNFlexible Behavior' in the VoPLibReference Library User's ManualDocument #: LTRT-00740.Mib name:acTrunkISDNCommonIncomingCallsBeh

aviorINI Name: ISDNINCALLSBEHAVIORProfile name: Trunk Profile

Outgoing CallsBehavior

Integer0-65535

Online 0 This is the bit-field used to determineseveral behavior options that influencehow the ISDN Stack OUTGOING callsbehave. Refer to Appendix A.8 in the'VoPLib Reference Library User'sManual.Mib name:acTrunkISDNCommonOutgoingCallsBehavior

INI Name: ISDNOUTCALLSBEHAVIORProfile name: Trunk Profile

General CCBehavior;REVERSE CHAN ALLOC

ALGO;CHAN ID 16ALLOWED;USE T1

PRI;USE E1PRI;START WITH

B CHANOOS;CHAN

ALLOCLOWEST;CHAN

ALLOC HIGHEST

IntegerBitmaskBitmap-0x07E8

Online 0 This is the bit-field used to determineseveral general ISDN behavior options.Refer to the Appendix A.8 'ISDN FlexibleBehavior' in the VoPLib ReferenceLibrary User's Manual Document #:LTRT-00740.Mib name:acTrunkISDNCommonGeneralCCBehaviorINI Name:ISDNGENERALCCBEHAVIORProfile name: Trunk Profile

NS Behaviour2 Integer0-65535

Online 0 Bit-field used to determine severalbehavior options, which influence howthe Q.931 protocol behaves.Refer to the VoPLib documentation(ISDN Flexible Behavior).Mib name:acTrunkISDNCommonNSBehaviour2INI Name: ISDNNSBEHAVIOUR2Profile name: Trunk Profile

NFAS

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000


DefaultValue

Description


Enum:acDCH-

CONFIG-

PRIMARY(0),acDCH-

CONFIG-BACKUP(1),

acDCH-CONFIG-NFAS(2)

Online 0 Defines D-channel configuration. Thissetting is only applicable to ISDN PRIprotocols that support NFAS and/or D-

channel backup procedures.

0 = D-channel is Primary1 = Backup2 = NFASMib name: acTrunkISDNNfasDchConfigINI Name: DCHCONFIGProfile name: Trunk Profile

ISDN NFASInterface ID

Integer0-255

Online 0 Defines the Interface ID. Works withNS_EXPLICIT_INTERFACE_ID. Refer tothe VoPLib documentation(ISDN FlexibleBehavior).

Default = (unsigned char)-1.


Group Number Integer0-9

Online 0 Relevant only for T1 ISDN NFAS trunksindicates the group number of the NFASgroup. ;Valid NFAS group numbers areonly 1 to 9, 0 indicating that this trunk isnot NFAS (in this case theISDNNFASInterfaceID and DchConfig

parameters are ignored).Mib name:acTrunkISDNNfasGroupNumberINI Name: NFASGROUPNUMBERProfile name: Trunk Profile

DPNSS

Real ChannelsNumber

Integer1-30

Online 30 This parameter is relevant only toprotocol ISDN DPNSS. Defines thenumber of real channels. Default value is30. Valid range 1 to 30.Mib name:acTrunkISDNDpnssNumRealChannels

INI Name:DPNSSNUMREALCHANNELSProfile name: Trunk Profile

Virtual ChannelsNumber

Integer0-30

Online 30 This parameter is relevant only toprotocol ISDN DPNSS. Defines thenumber of virtual channels. Default valueis 30. Valid range 0 to 30.Mib name:acTrunkISDNDpnssNumVirtualChannelsINI Name:DPNSSNUMVIRTUALCHANNELSProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000





DefaultValue

Description

Behavior;STOPSABMR AFTER NL

AND NT1;FULL

STARTUPSUCCESS;DLCOOS AFTER NLAND NT1;DLC

OOS WHEN L3 QFULL;DASS2

PROTOCOL;SIMULTANEOUS

STARTUP;COMPSIG BY PH


0x007F

Online The DPNSSBehaviour parameterrepresents a Bit field parameter. Each bitrepresents a specific type of DPNSS

behavior. Currently only the first 2 bitsare in use.

-DPNSS_BEHAV_STOP_SABMR_AFTER_NL_AND_NT1 bit: (bit #0, bit mask0x0001)

When set to 1: DPNSS stops repeatingSABMR after NL and NT1 limits areexceeded.When set to 0: DPNSS continuesrepeating SABMR after NL and NT1limits are exceeded.Default is 0 (continue repeating SABMR) -DPNSS_BEHAV_FULL_STARTUP_SUCCESS bit: (bit #1, bit mask 0x0002)

When set to 1: the Startup Procedure isconsidered as a SUCCESS only whenALL DLCs succeeded to Reset;

When set to 0: the Startup Procedure isconsidered as a SUCCESS as soon as 1DLC succeeded to Reset;Default is 0: (only partial reset isconsidered as a success).

Mib name: acTrunkISDNDpnssBehavior INI Name: DPNSSBEHAVIORProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.43.3 Tab: Line Settings

Frame: Trunk Parameters Provision ing (TP-6310), Tab: Line Settings

ParameterName


DefaultValue

Description

Line BuildOut Loss

Enum:ac0DB(0), ac7-

5DB(1),ac15DB(2), ac22-

5DB(3)

Online 0 Used to select the line build out loss to beused for this trunk.

0 = 0 dB1 = 7.5 dB2 = 15 dB3 = 22.5 dBMib name: acTrunkLineBuildOutLossINI Name: LINEBUILDOUT.LOSS

Profile name: Trunk ProfileLine Build

Out OverwriteEnum:

acNO-OVER-WRITE(0),acOVER-WRITE(1)

Online 0 Used to overwrite the Framer's XPMregisters values (these registers control theline pulse shape).

0 = No overwrite1 = OverwriteMib name: acTrunkLineBuildOutOverwriteINI Name: LINEBUILDOUT.OVERWRITEProfile name: Trunk Profile

Line BuildOut XPM0

Integer0-255

Online 0 Used to control the Framer's XPM0 registervalue (line pulse shape control).

Applicable only whenTrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.

Range = 0 to 255Mib name: acTrunkLineBuildOutXPM0INI Name: LINEBUILDOUT.XPM0Profile name: Trunk Profile

Line BuildOut XPM1

Integer0-255

Online 0 Used to control the Framer's XPM1 registervalue (line pulse shape control).Applicable only whenTrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Line BuildOut XPM2

Integer0-255

Online 0 Used to control the Framer's XPM2 registervalue (line pulse shape control).Applicable only when

TrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.


2.43.4 Tab: CAS Settings

Frame: Trunk Parameters Provisioning (TP-6310), Tab: CAS Settings

ParameterName


DefaultValue

Description

Trunk CasTable Index

Integer0-7

Online 0 This parameter determines which CASprotocol file to use on a specific trunk. Theindex value corresponds to the numberconfigured for the parameterCASFileName_X.Range = not greater than the parameterdefining the PSTN CAS Table Num.Mib name: acTrunkCASTablesIndex

INI Name: CASTABLEINDEXProfile name: Trunk Profile

CAS Tableper Channel


Online Sets the Cas protocol table index perchannel.User need to set each channel the tablenumber 0-7, with comma saperatorbetween channels:"1,3,1,3,1,3.."Mib name: acTrunkCASTablePerChannelINI Name: CASCHANNELINDEXProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.44 Frame: Trunk Parameters Provisioning (TP-8410)


Frame: Trunk Parameters Provisioning (TP-8410), Tab: General Settings

ParameterName


DefaultValue

Description

ProtocolType

Enum:NONE(0),



4),E1Transparent

31(5),E1Transparent

30(6),E1Mfcr2(7),E1CasR2(8),

E1RawCAS(9),T1-

NI2ISDN(10),T1-


ISDN(12), T1-5Ess-10-




E1-KOR-ISDN(19), T1-

HKT-ISDN(20),E1-QSIG(21),

E1-TNZ-22(22),T1-EXTRA-23(23), T1-

IUA(28), E1-IUA(29), E1-



32(32),EXTRA-33(33),

T1-EURO-




7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description


MERIDIAN-





EURO-ISDN(50), BRI-

NI-2(51), BRI-DMS100(52),





acCLOCK-

MASTER-ON(1)



clock source is provided by the internal/TDMbus clock source depending on theparameter TDM Bus Clock Source)Mib name: acTrunkClockMasterINI Name: CLOCKMASTERProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

FramingMethod

Enum:EXTENDED-

SUPER-

FRAME(0),SUPER-




JT(11)



acAMI(1),acHDB3(2)

Online 0 Use to select line code. B8ZS or AMI for T1spans and HDB3 or AMI for E1 spans.

0 = Use B8ZS line code (for T1 trunks only =default)1 = Use AMI line code (for T1 or E1 trunks)2 = Use HDB3 line code (for E1 trunks only)Mib name: acTrunkLineCodeINI Name: LINECODEProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description


TRACE(0),


ISDN-TRACE(2),


TRACE(3),acLAYER3-

ISDN-TRACE-NO-


ISDN-TRACE-WITH-


DATA-TRACE(6),



DATA-TRACE(8),

acSS7-MTP2(10),

acSS7-MTP2-AND-


SL-L3-NO-MSU(12),

acSS7-AAL(15)

Online 0 Defines the Trace level:acNO_TRACE = 0acFULL_ISDN_TRACE = 1acLAYER3_ISDN_TRACE = 2acONLY_ISDN_Q931_MSGS_TRACE = 3acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4acFULL_ISDN_TRACE_WITH_DUPLICATION = 5acISDN_Q931_RAW_DATA_TRACE = 6acISDN_Q921_RAW_DATA_TRACE = 7acISDN_Q931_Q921_RAW_DATA_TRACE= 8acSS7_MTP2 = 10acSS7_MTP2_AND_APPLI = 11acSS7_MTP2_SL_L3_NO_MSU = 12acSS7_AAL = 15Mib name: acTrunkTraceLevelINI Name: TRACELEVELProfile name: Trunk Profile

Dial PlanName


Instant 0 Sets the Dial Plan name that will be used onthe specific trunk.


Auto ClockPriority

Integer0-100

Online 0 Defines the trunk priority for auto-clockfallback (Priority range: 0 - 100 (0 - 99 arepriority settings, in which 0 = highest Priorityand is the default setting; 100 = Do notchoose this trunk)Mib name: acTrunkAutoClockPriorityINI Name: AUTOCLOCKTRUNKPRIORITY


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

V5.2Parameters

V5 Numberof C-channels

Integer0-1 Online 0 Indicates the number of timeslots used ascommunication channels in a V5 trunk.0 - No C-channel, the trunk is voice only.1 - Timeslot 16 is used for the V5 signaling

Mib name: acTrunkV5NumberOfCChannelsINI Name: V5NUMBEROFCCHANNELSProfile name: Not Profiled

V5 ProtocolSide

Enum:an-Side(0), le-

Side(1)

Online 1 Indicates the V5 side of the V5 protocolserved by the trunk..0 - AN side.

1 - LE side

Mib name: acTrunkV5ProtocolSideINI Name: V5PROTOCOLSIDEProfile name: Not Profiled

V5 InterfaceNum

Integer-1-31

Read-Only -1 V5.2 interface containing this trunk.-1 means information not available or notrelevant.Mib name: acTrunkStatusV5InterfaceNumProfile name: Not Profiled

V5 Link ID Integer

-1-62

Read-Only -1 V5.2 link containing this trunk.

-1 means information not available or notrelevant.Mib name: acTrunkStatusV5LinkIDProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000





Frame: Trunk Parameters Provisioning (TP-8410), Tab: ISDN Settings

Parameter Name Type ProvisioningType

DefaultValue

Description

Common


TERMINATION-SIDE(0),acNETWOR

K-TERMINATION-SIDE(1)

Online 0 Used to set the ISDN Termination toeither User or Network. Termination =For ISDN only.User side = 0Network side = 1Mib name:acTrunkISDNCommonTerminationSideINI Name: TERMINATIONSIDE

Profile name: Trunk Profile

Q931 Layer ResponseBehavior;NO STATUSON UNKNOWN IE;NOSTATUS ON INV OP

IE;ACCEPT UNKNOWNFAC IE;SEND USER

CONNECTACK;EXPLICITINTERFACEID;ALWAYS

EXPLICIT;ACCEPT MU

LAW;EXPLICIT PRESSCREENING;STATUSINCOMPATIBLESTATE;STATUS

ERRORCAUSE;ACCEPT A

LAW;RESTARTINDICATION;FORCED

RESTART


0x06F8A87

Online 0 Bit-field used to determine severalbehavior options, which influence howthe Q.931 protocol behaves.Mib name:acTrunkISDNCommonQ931LayerResponseBehaviorINI Name: ISDNIBEHAVIORProfile name: Trunk Profile

Duplicate Q931 BuffMode

Integer0-255

Online 0 Activates / de-activates delivery of rawQ.931 messages. Refer to the VoPLibdocumentation ('ISDN FlexibleBehavior').Mib name:acTrunkISDNCommonDuplicateQ931BuffModeINI Name:ISDNDUPLICATEQ931BUFFMODEProfile name: Trunk Profile


2147483647

Read-Only -1 Defines the IUA trunk interface IDvalue - unsigned integer - in RFC 3057- SIGTRAN. Default = 0xFFFFFFFF.Mib name:acTrunkISDNCommonIuaInterfaceIdProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000


DefaultValue

Description

Incoming CallsBehavior;DATA CONN

RS;VOICE CONN

RS;CHAN ID IN FIRSTRS;USER SETUP

ACK;CHAN ID IN CALLPROC;PROGR IND IN

SETUP ACK


0x013860

Online 0 This is the bit-field used to determineseveral behavior options that influencehow the ISDN Stack INCOMING calls

behave. Refer to the Appendix A.8'ISDN Flexible Behavior' in the VoPLibReference Library User's ManualDocument #: LTRT-00740.Mib name:acTrunkISDNCommonIncomingCallsBehaviorINI Name: ISDNINCALLSBEHAVIORProfile name: Trunk Profile

Outgoing Calls Behavior Integer0-65535

Online 0 This is the bit-field used to determineseveral behavior options that influencehow the ISDN Stack OUTGOING calls

behave. Refer to Appendix A.8 in the'VoPLib Reference Library User'sManual.Mib name:acTrunkISDNCommonOutgoingCallsBehaviorINI Name:ISDNOUTCALLSBEHAVIORProfile name: Trunk Profile

General CCBehavior;REVERSE

CHAN ALLOC

ALGO;CHAN ID 16ALLOWED;USE T1PRI;USE E1 PRI;START

WITH B CHANOOS;CHAN ALLOC

LOWEST;CHAN ALLOCHIGHEST


0x07E8

Online 0 This is the bit-field used to determineseveral general ISDN behavioroptions. Refer to the Appendix A.8

'ISDN Flexible Behavior' in the VoPLibReference Library User's ManualDocument #: LTRT-00740.Mib name:acTrunkISDNCommonGeneralCCBehaviorINI Name:ISDNGENERALCCBEHAVIORProfile name: Trunk Profile


Online 0 Bit-field used to determine severalbehavior options, which influence howthe Q.931 protocol behaves.Refer to the VoPLib documentation

(ISDN Flexible Behavior).Mib name:acTrunkISDNCommonNSBehaviour2INI Name: ISDNNSBEHAVIOUR2Profile name: Trunk Profile

NFAS

7/23/2019 LTRT-32105 Mediant 3000





DefaultValue

Description

D-channel configuration Enum:acDCH-

CONFIG-

PRIMARY(0), acDCH-CONFIG-

BACKUP(1),acDCH-

CONFIG-NFAS(2)

Online 0 Defines D-channel configuration. Thissetting is only applicable to ISDN PRIprotocols that support NFAS and/or D-

channel backup procedures.

0 = D-channel is Primary1 = Backup2 = NFASMib name:acTrunkISDNNfasDchConfigINI Name: DCHCONFIGProfile name: Trunk Profile

ISDN NFAS Interface ID Integer0-255

Online 0 Defines the Interface ID. Works withNS_EXPLICIT_INTERFACE_ID. Referto the VoPLib documentation(ISDN

Flexible Behavior).Default = (unsigned char)-1.

Range = 0 to 255Mib name:acTrunkISDNNfasInterfaceIdINI Name: ISDNNFASINTERFACEIDProfile name: Not Profiled


Online 0 Relevant only for T1 ISDN NFAStrunks indicates the group number ofthe NFAS group. ;Valid NFAS groupnumbers are only 1 to 9, 0 indicating

that this trunk is not NFAS (in this casethe ISDNNFASInterfaceID andDchConfig parameters are ignored).Mib name:acTrunkISDNNfasGroupNumberINI Name: NFASGROUPNUMBERProfile name: Trunk Profile

DPNSS

Real Channels Number Integer1-30

Online 30 This parameter is relevant only toprotocol ISDN DPNSS. Defines thenumber of real channels. Default valueis 30. Valid range 1 to 30.

Mib name:acTrunkISDNDpnssNumRealChannelsINI Name:DPNSSNUMREALCHANNELSProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000


DefaultValue

Description

Virtual ChannelsNumber

Integer0-30

Online 30 This parameter is relevant only toprotocol ISDN DPNSS. Defines thenumber of virtual channels. Default

value is 30. Valid range 0 to 30.Mib name:acTrunkISDNDpnssNumVirtualChannelsINI Name:DPNSSNUMVIRTUALCHANNELSProfile name: Trunk Profile

Behavior;STOP SABMRAFTER NL AND

NT1;FULL STARTUPSUCCESS;DLC OOS

AFTER NL AND

NT1;DLC OOS WHENL3 Q FULL;DASS2

PROTOCOL;SIMULTANEOUS

STARTUP;COMP SIGBY PH

IntegerBitmaskBitmap-0x007F

Online The DPNSSBehaviour parameterrepresents a Bit field parameter. Eachbit represents a specific type ofDPNSS behavior. Currently only thefirst 2 bits are in use.

-DPNSS_BEHAV_STOP_SABMR_AFTER_NL_AND_NT1 bit: (bit #0, bit mask0x0001)

When set to 1: DPNSS stops repeatingSABMR after NL and NT1 limits areexceeded.When set to 0: DPNSS continuesrepeating SABMR after NL and NT1limits are exceeded.Default is 0 (continue repeating

SABMR)

-DPNSS_BEHAV_FULL_STARTUP_SUCCESS bit: (bit #1, bit mask 0x0002) When set to 1: the Startup Procedureis considered as a SUCCESS onlywhen ALL DLCs succeeded to Reset; When set to 0: the Startup Procedureis considered as a SUCCESS as soonas 1 DLC succeeded to Reset;

Default is 0: (only partial reset isconsidered as a success).

Mib name:acTrunkISDNDpnssBehaviorINI Name: DPNSSBEHAVIORProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000





Frame: Trunk Parameters Provision ing (TP-8410), Tab: Line Settings

ParameterName


DefaultValue

Description

Line BuildOut Loss

Enum:ac0DB(0), ac7-

5DB(1),ac15DB(2), ac22-

5DB(3)

Online 0 Used to select the line build out loss tobe used for this trunk.

0 = 0 dB1 = 7.5 dB2 = 15 dB3 = 22.5 dBMib name: acTrunkLineBuildOutLossINI Name: LINEBUILDOUT.LOSSProfile name: Trunk Profile

Line BuildOut Overwrite Enum:acNO-OVER-WRITE(0),acOVER-WRITE(1)

Online 0 Used to overwrite the Framer's XPMregisters values (these registerscontrol the line pulse shape).

0 = No overwrite1 = OverwriteMib name:acTrunkLineBuildOutOverwriteINI Name:LINEBUILDOUT.OVERWRITEProfile name: Trunk Profile

Line Build

Out XPM0

Integer

0-255

Online 0 Used to control the Framer's XPM0

register value (line pulse shapecontrol).Applicable only whenTrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.


Line BuildOut XPM1

Integer0-255

Online 0 Used to control the Framer's XPM1register value (line pulse shapecontrol).



7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Line BuildOut XPM2

Integer0-255

Online 0 Used to control the Framer's XPM2register value (line pulse shapecontrol).




Frame: Trunk Parameters Provisioning (TP-8410), Tab: CAS Settings

ParameterName


DefaultValue

Description


Integer0-7

Online 0 This parameter determines which CASprotocol file to use on a specific trunk. Theindex value corresponds to the numberconfigured for the parameterCASFileName_X.Range = not greater than the parameterdefining the PSTN CAS Table Num.

Mib name: acTrunkCASTablesIndexINI Name: CASTABLEINDEXProfile name: Trunk Profile




7/23/2019 LTRT-32105 Mediant 3000




2.45 Frame: Trunk SIP Provisioning (TP-6310)


Frame: Trunk SIP Provisioning (TP-6310), Tab: General Settings

ParameterName


DefaultValue

Description

Protocol Type Enum:NONE(0),



4),E1Transparent

31(5),E1Transparent

30(6),E1Mfcr2(7),E1CasR2(8),

E1RawCAS(9),T1-

NI2ISDN(10),T1-


ISDN(12), T1-5Ess-10-




E1-KOR-ISDN(19), T1-HKT-ISDN(20),E1-QSIG(21),

E1-TNZ-22(22),T1-EXTRA-23(23), T1-

IUA(28), E1-IUA(29), E1-



32(32),EXTRA-33(33),

T1-EURO-




7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description


MERIDIAN-





EURO-ISDN(50), BRI-

NI-2(51), BRI-DMS100(52),





acCLOCK-

MASTER-ON(1)



clock source is provided by theinternal/TDM bus clock source dependingon the parameter TDM Bus Clock Source)Mib name: acTrunkClockMasterINI Name: CLOCKMASTERProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

FramingMethod

Enum:EXTENDED-

SUPER-

FRAME(0),SUPER-




JT(11)



acAMI(1),acHDB3(2)

Online 0 Use to select line code. B8ZS or AMI for T1spans and HDB3 or AMI for E1 spans.

0 = Use B8ZS line code (for T1 trunks only= default)1 = Use AMI line code (for T1 or E1 trunks)2 = Use HDB3 line code (for E1 trunks only)Mib name: acTrunkLineCodeINI Name: LINECODEProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description


TRACE(0),


ISDN-TRACE(2),


TRACE(3),acLAYER3-

ISDN-TRACE-NO-


ISDN-TRACE-WITH-


DATA-TRACE(6),



DATA-TRACE(8),

acSS7-MTP2(10),

acSS7-MTP2-AND-


SL-L3-NO-MSU(12),

acSS7-AAL(15)

Online 0 Defines the Trace level:acNO_TRACE = 0acFULL_ISDN_TRACE = 1acLAYER3_ISDN_TRACE = 2acONLY_ISDN_Q931_MSGS_TRACE = 3acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4acFULL_ISDN_TRACE_WITH_DUPLICATION = 5acISDN_Q931_RAW_DATA_TRACE = 6acISDN_Q921_RAW_DATA_TRACE = 7acISDN_Q931_Q921_RAW_DATA_TRACE= 8acSS7_MTP2 = 10acSS7_MTP2_AND_APPLI = 11acSS7_MTP2_SL_L3_NO_MSU = 12acSS7_AAL = 15Mib name: acTrunkTraceLevelINI Name: TRACELEVELProfile name: Trunk Profile

Dial PlanName




Auto ClockPriority

Integer0-100

Online 0 Defines the trunk priority for auto-clockfallback (Priority range: 0 - 100 (0 - 99 arepriority settings, in which 0 = highest Priorityand is the default setting; 100 = Do notchoose this trunk)Mib name: acTrunkAutoClockPriorityINI Name: AUTOCLOCKTRUNKPRIORITY


7/23/2019 LTRT-32105 Mediant 3000





Frame: Trunk SIP Provisioning (TP-6310), Tab: ISDN Settings


DefaultValue

Description

Termination Side Enum:acUSER-TERMINA

TION-SIDE(0),

acNETWORK-

TERMINATION-

SIDE(1)

Online 0 Used to set the ISDN Termination to eitherUser or Network. Termination = For ISDNonly.User side = 0Network side = 1Mib name:acTrunkISDNCommonTerminationSideINI Name: TERMINATIONSIDEProfile name: Trunk Profile

Q931 LayerResponseBehavior;NOSTATUS ON

UNKNOWN IE;NOSTATUS ON INVOP IE;ACCEPTUNKNOWN FACIE;SEND USER

CONNECTACK;EXPLICITINTERFACEID;ALWAYS

EXPLICIT;ACCEPTMU LAW;EXPLICIT

PRESSCREENING;STATUS INCOMPATIBLE

STATE;STATUSERROR

CAUSE;ACCEPT ALAW;RESTART

INDICATION;FORCED RESTART


0x06F8A87

Online 0 Bit-field used to determine several behavioroptions, which influence how the Q.931protocol behaves.Mib name:acTrunkISDNCommonQ931LayerResponseBehaviorINI Name: ISDNIBEHAVIORProfile name: Trunk Profile

Incoming Calls

Behavior;DATACONN RS;VOICECONN RS;CHAN IDIN FIRST RS;USERSETUP ACK;CHAN

ID IN CALLPROC;PROGR IND

IN SETUP ACK

Integer

BitmaskBitmap-0x013860

Online 0 This is the bit-field used to determine

several behavior options that influence howthe ISDN Stack INCOMING calls behave.Refer to the Appendix A.8 'ISDN FlexibleBehavior' in the VoPLib Reference LibraryUser's Manual Document #: LTRT-00740.Mib name:acTrunkISDNCommonIncomingCallsBehaviorINI Name: ISDNINCALLSBEHAVIORProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000


DefaultValue

Description


Integer0-65535

Online 0 This is the bit-field used to determineseveral behavior options that influence howthe ISDN Stack OUTGOING calls behave.

Refer to Appendix A.8 in the 'VoPLibReference Library User's Manual.Mib name:acTrunkISDNCommonOutgoingCallsBehaviorINI Name: ISDNOUTCALLSBEHAVIORProfile name: Trunk Profile


CHAN ALLOCALGO;CHAN ID 16ALLOWED;USE T1

PRI;USE E1PRI;START WITH BCHAN OOS;CHAN

ALLOCLOWEST;CHAN

ALLOC HIGHEST


Online 0 This is the bit-field used to determineseveral general ISDN behavior options.Refer to the Appendix A.8 'ISDN FlexibleBehavior' in the VoPLib Reference LibraryUser's Manual Document #: LTRT-00740.

Mib name:acTrunkISDNCommonGeneralCCBehavior INI Name: ISDNGENERALCCBEHAVIORProfile name: Trunk Profile


2147483647

Read-Only -1 Defines the IUA trunk interface ID value -unsigned integer - in RFC 3057 - SIGTRAN.Default = 0xFFFFFFFF.Mib name:acTrunkISDNCommonIuaInterfaceIdProfile name: Not Profiled


Enum:acDCH-

CONFIG-PRIMARY(

0),acDCH-

CONFIG-BACKUP(

1),acDCH-

CONFIG-NFAS(2)



ISDN NFASInterface ID

Integer0-255

Online 0 Defines the Interface ID. Works withNS_EXPLICIT_INTERFACE_ID. Refer tothe VoPLib documentation(ISDN FlexibleBehavior).Default = (unsigned char)-1.


7/23/2019 LTRT-32105 Mediant 3000





DefaultValue

Description


Online 0 Relevant only for T1 ISDN NFAS trunksindicates the group number of the NFASgroup. ;Valid NFAS group numbers are only

1 to 9, 0 indicating that this trunk is notNFAS (in this case theISDNNFASInterfaceID and DchConfigparameters are ignored).Mib name: acTrunkISDNNfasGroupNumber INI Name: NFASGROUPNUMBERProfile name: Trunk Profile


Integer0-255

Online 0 Activates / de-activates delivery of rawQ.931 messages. Refer to the VoPLibdocumentation ('ISDN Flexible Behavior').Mib name:acTrunkISDNCommonDuplicateQ931BuffM

odeINI Name:ISDNDUPLICATEQ931BUFFMODEProfile name: Trunk Profile


Online 0 Bit-field used to determine several behavioroptions, which influence how the Q.931protocol behaves.Refer to the VoPLib documentation (ISDNFlexible Behavior).Mib name:acTrunkISDNCommonNSBehaviour2INI Name: ISDNNSBEHAVIOUR2



Frame: Trunk SIP Provis ioning (TP-6310), Tab: Line Settings

ParameterName


DefaultValue

Description

Line BuildOut Loss

Enum:ac0DB(0), ac7-

5DB(1),ac15DB(2), ac22-5DB(3)


0 = 0 dB1 = 7.5 dB2 = 15 dB3 = 22.5 dBMib name: acTrunkLineBuildOutLossINI Name: LINEBUILDOUT.LOSSProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Line BuildOut Overwrite

Enum:acNO-OVER-

WRITE(0),

acOVER-WRITE(1)



Line BuildOut XPM0

Integer0-255



Line BuildOut XPM1

Integer0-255


Range = 0 to 255Mib name: acTrunkLineBuildOutXPM1

INI Name: LINEBUILDOUT.XPM1Profile name: Trunk Profile

Line BuildOut XPM2

Integer0-255



7/23/2019 LTRT-32105 Mediant 3000





Frame: Trunk SIP Provisioning (TP-6310), Tab: CAS Settings

ParameterName


DefaultValue

Description


Integer0-7

Online 0 This parameter determines which CASprotocol file to use on a specific trunk. Theindex value corresponds to the numberconfigured for the parameterCASFileName_X.Range = not greater than the parameterdefining the PSTN CAS Table Num.Mib name: acTrunkCASTablesIndexINI Name: CASTABLEINDEX

Profile name: Trunk ProfileCAS Table

per ChannelString

Up to 63 chars.Online Sets the Cas protocol table index per

channel.User need to set each channel the tablenumber 0-7, with comma saperatorbetween channels:"1,3,1,3,1,3.."Mib name: acTrunkCASTablePerChannelINI Name: CASCHANNELINDEXProfile name: Trunk Profile

2.45.5 Tab: SIP Settings

Frame: Trunk SIP Provisioning (TP-6310), Tab: SIP Settings

ParameterName


DefaultValue

Description


ISDN

Enum:NotSet(-1),LocalRB(0),

RemoteRB1(1),RemoteRB8(8)

Instant -1 Override the value of progressindicator to ISDN side in ALERTPROGRESS and PROCEEDINGmessagesMib name:progressIndicatorToISDNValueINI Name:PROGRESSINDICATOR2ISDNProfile name: Trunk Profile

Play Ring BackTone To Tel


DoNotPlay(0),PlayOnLocal(1),

PreferIp(2),PlayLocalUntilRemot

eMediaArrives(3)

Instant 2 Enable ringback tone playingtowards trunk side. Refer to User'sManual for detailsMib name:playRBToneToTrunkValueINI Name: PLAYRBTONE2TRUNKProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

TransferCapability To

ISDN

Enum:DoNotOverwrite(-1),Modem(0), Voice(1),

Data(2), Audio(3)

Instant 0 Send transfer capability to ISDNside on setup message -1:Do notOverwrite 0:Audio 3.1 1:Speech

2:Data 3:AudioMib name:iSDNTransferCapabilityValueINI Name:ISDNTRANSFERCAPABILITYProfile name: Trunk Profile

Local ISDN RBSource

Enum:pbx(0), gateway(1)

Instant 0 If the ringback tone source is not IP,who should supply the Ringbacktone. 0 - PBX/PSTN (default) ; 1-GWMib name:localISDNRBSourceValue

INI Name:LOCALISDNRBSOURCEProfile name: Trunk Profile

PI ForDisconnect Msg

Integer-1-8

Instant -1 Configure PIForDisconnectMsg inorder to overwrite PI value receivedin ISDN Disconnect messageMib name:pIForDisconnectMsgValueINI Name:PIFORDISCONNECTMSGProfile name: Trunk Profile

Trunk Transfer

Mode

Enum:

none(0), casNFA(1),iSDN(2),

casNormal(3),QSIGSingleStep(4),QSIGPathReplacem

ent(5)

Instant 0 The type of transfer the PSTN/PBX

supportsMib name: trunkTransferModeINI Name:TRUNKTRANSFERMODEProfile name: Trunk Profile

PSTN AlertTimeout Value

Integer-1-600

Instant -1 Max time (in seconds) to wait forconnect from PSTNMib name: pSTNAlertTimeoutValueINI Name:TRUNKPSTNALERTTIMEOUTProfile name: Trunk Profile

RTP Only ModeFor Trunk


Disable(0),TransmitReceive(1),

TransmitOnly(2),ReceiveOnly(3)

Instant -1 immediately. -1 - takes theRTPONLYMODE global value pergatewa 0 - regular callestablishment. 1 - The RTP channelopen for Rx And Tx. 2-The RTPchannel open only for Tx 3 -TheRTP channel open only fo RxMib name:rtpOnlyModeForTrunkRtpOnlyModeForTrunkINI Name:RTPONLYMODEFORTRUNK


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

B ChannelNegotiation For

Trunk Mode


Preferred(0),

Exclusive(1), Any(2)

Instant 0 ISDN B-Channel negotiation modefor trunkput MODE_NOT_SET (-1) to use

BCHANNELNEGOTIATION perGatewayMib name:acBChannelNegotiationForTrunkModeINI Name:BCHANNELNEGOTIATIONFORTRUNKProfile name: Trunk Profile

Digital OOSBehavior ForTrunk Value


default(0),

Service(1),dChannel(2),

Alarm(3), Block(4)

Offline 0 Digital OOS Behavior for trunk putOOS_NOT_SET (-1) to useDIGITALOOSBEHAVIOR per

GatewayMib name:acDigitalOOSBehaviorForTrunkValueINI Name:DIGITALOOSBEHAVIORFORTRUNKProfile name: Trunk Profile

Remove CallingName For Trunk

Mode



Instant 0 Remove Calling Name For Trunktable .Set (-1) to use the globalparameterdigitalGWextRemoveCallingName.

Mib name:acRemoveCallingNameForTrunkModeINI Name:REMOVECALLINGNAMEFORTRUNKProfile name: Trunk Profile

Call ReroutingMode

Enum:none(0),

isdnReroutingEnabled(1)

Instant 0 Call Rerouting Mode. Set to 1 toenable ISDN call reroutingMib name:acCallReroutingModeForTrunkModeINI Name:

CALLREROUTINGMODEProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.46 Frame: Trunk SIP Provisioning (TP-8410)


Frame: Trunk SIP Provisioning (TP-8410), Tab: General Settings

ParameterName


DefaultValue

Description

Protocol Type Enum:NONE(0),

E1EuroISDN(1), T1Cas(2),T1RawCas(3)

,T1Transparen

t(4),E1Transpare

nt31(5),E1Transpare

nt30(6),E1Mfcr2(7),E1CasR2(8),E1RawCAS(9

), T1-NI2ISDN(10),

T1-4EssISDN(11), T1-5Ess-9-

ISDN(12), T1-5Ess-10-


ISDN(14), J1-TRANSPARENT(15), T1-

NTT-ISDN(16), E1-

AUSTEL-ISDN(17), E1-

HKT-ISDN(18), E1-

KOR-ISDN(19), T1-

HKT-ISDN(20), E1-

QSIG(21),E1-TNZ-

22(22), T1-EXTRA-

23(23), T1-IUA(28), E1-IUA(29), E1-

EXTRA-30(30), E1-

FRENCH-

Online 0 Used to set the PSTN protocol to beused for this trunk. Relevant only whenTDMBusType=acFRAMERS (2).Either:NONE = 0E1_EURO_ISDN = 1T1_CAS = 2

T1_RAW_CAS = 3T1_TRANSPARENT = 4E1_TRANSPARENT_31 = 5E1_TRANSPARENT_30 = 6E1_MFCR2 = 7E1_CAS = 8E1_RAW_CAS = 9T1_NI2_ISDN = 10T1_4ESS_ISDN = 11T1_5ESS_9_ISDN = 12T1_5ESS_10_ISDN = 13T1_DMS100_ISDN = 14J1_TRANSPARENT = 15

T1_NTT_ISDN = 16E1_AUSTEL_ISDN = 17E1_HKT_ISDN = 18E1_KOR_ISDN = 19T1_HKT_ISDN = 20E1_QSIG = 21E1_TNZ_ISDN = 22T1_QSIG = 23T1_IUA = 28E1_IUA = 29E1_FRENCH_VN6_ISDN = 30E1_FRENCH_VN3_ISDN = 31T1_EURO_ISDN = 34

T1_DMS100_MERIDIAN_ISDN = 35T1_NI1_ISDN = 36E1_DUA = 37E1_Q931_PACKETS = 38T1_Q931_PACKETS = 39E1_NI2_ISDN = 40E1-CAS-R15 = 41V5 = 43BRI-EURO-ISDN = 50BRI-NI-2 = 51BRI-DMS100 = 52BRI-5ESS = 53BRI-QSIG = 54

BRI-VNG = 55

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

VN3-ISDN(31), T1-

EXTRA-

32(32),EXTRA-

33(33), T1-EURO-


MERIDIAN-ISDN(35), T1-

NI1-ISDN(36), E1-DUA(37), E1-

Q931-PACKETS(38

), T1-Q931-PACKETS(39

), E1-NI2-ISDN(40), E1-CAS-R15(41),V5(43), BRI-

EURO-ISDN(50),

BRI-NI-2(51),BRI-

DMS100(52),BRI-

5ESS(53),

BRI-QSIG(54),

BRI-VNG(55),BRI-NTT(56),BRI-IUA(57)

BRI-NTT = 56BRI-IUA = 57.



acCLOCK-MASTER-

ON(1)


0 = acCLOCK_MASTER_OFF (clockrecovered from the line)1 = acCLOCK_MASTER_ON (the trunkclock source is provided by theinternal/TDM bus clock source depending

on the parameter TDM Bus ClockSource)Mib name: acTrunkClockMasterINI Name: CLOCKMASTERProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

FramingMethod

Enum:EXTENDED-

SUPER-

FRAME(0),SUPER-

FRAME(1),E1-

FRAMING-DDF(2), E1-FRAMING-

MFF-CRC4(3), E1-FRAMING-MFF-CRC4-EXT(4), T1-FRAMING-F4(6), T1-FRAMING-F12(7), T1-FRAMING-ESF(8), T1-FRAMING-ESF-CRC6

(9), T1-FRAMING-

F72(10), T1-FRAMING-ESF-CRC6-

JT(11)

Online 0 Selects the Framing method to be usedfor this trunk.Mib name: acTrunkFramingMethodProfile name: Trunk Profile

Line Code Enum:acB8ZS(0),acAMI(1),

acHDB3(2)

Online 0 Use to select line code. B8ZS or AMI forT1 spans and HDB3 or AMI for E1 spans. 0 = Use B8ZS line code (for T1 trunksonly = default)1 = Use AMI line code (for T1 or E1trunks)2 = Use HDB3 line code (for E1 trunksonly)Mib name: acTrunkLineCodeINI Name: LINECODEProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description


TRACE(0),

acFULL-ISDN-

TRACE(1),acLAYER3-

ISDN-TRACE(2),acONLY-

ISDN-Q931-MSGS-

TRACE(3),acLAYER3-

ISDN-TRACE-NO-DUPLICATIO

N(4),acFULL-ISDN-

TRACE-WITH-


DATA-TRACE(6),

acISDN-Q921-RAW-

DATA-TRACE(7),acISDN-

Q931-Q921-RAW-DATA-TRACE(8),

acSS7-MTP2(10),

acSS7-MTP2-AND-


SL-L3-NO-MSU(12),acSS7-AAL(15)

Online 0 Defines the Trace level:acNO_TRACE = 0acFULL_ISDN_TRACE = 1acLAYER3_ISDN_TRACE = 2acONLY_ISDN_Q931_MSGS_TRACE =3acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4acFULL_ISDN_TRACE_WITH_DUPLICATION = 5acISDN_Q931_RAW_DATA_TRACE = 6acISDN_Q921_RAW_DATA_TRACE = 7acISDN_Q931_Q921_RAW_DATA_TRACE = 8acSS7_MTP2 = 10acSS7_MTP2_AND_APPLI = 11acSS7_MTP2_SL_L3_NO_MSU = 12acSS7_AAL = 15Mib name: acTrunkTraceLevelINI Name: TRACELEVELProfile name: Trunk Profile

Dial PlanName




7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

Auto ClockPriority

Integer0-100

Online 0 Defines the trunk priority for auto-clockfallback (Priority range: 0 - 100 (0 - 99are priority settings, in which 0 = highest

Priority and is the default setting; 100 =Do not choose this trunk)Mib name: acTrunkAutoClockPriorityINI Name:AUTOCLOCKTRUNKPRIORITYProfile name: Not Profiled

V5.2Parameters

V5 Number ofC-channels

Integer0-1

Online 0 Indicates the number of timeslots usedas communication channels in a V5trunk.

0 - No C-channel, the trunk is voice only.1 - Timeslot 16 is used for the V5signaling

Mib name:acTrunkV5NumberOfCChannelsINI Name: V5NUMBEROFCCHANNELSProfile name: Not Profiled

V5 ProtocolSide

Enum:an-Side(0),le-Side(1)

Online 1 Indicates the V5 side of the V5 protocolserved by the trunk..0 - AN side.1 - LE side

Mib name: acTrunkV5ProtocolSideINI Name: V5PROTOCOLSIDEProfile name: Not Profiled

V5 InterfaceNum

Integer-1-31

Read-Only -1 V5.2 interface containing this trunk.-1 means information not available or notrelevant.Mib name:acTrunkStatusV5InterfaceNumProfile name: Not Profiled

V5 Link ID Integer-1-62

Read-Only -1 V5.2 link containing this trunk.-1 means information not available or notrelevant.Mib name: acTrunkStatusV5LinkIDProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000





Frame: Trunk SIP Provisioning (TP-8410), Tab: ISDN Settings


DefaultValue

Description


TERMINATION-

SIDE(0),acNETWOR

K-TERMINATION-SIDE(1)

Online 0 Used to set the ISDN Termination toeither User or Network. Termination = ForISDN only.User side = 0Network side = 1Mib name:acTrunkISDNCommonTerminationSideINI Name: TERMINATIONSIDEProfile name: Trunk Profile

Q931 LayerResponse

Behavior;NOSTATUS ON

UNKNOWN IE;NOSTATUS ON INVOP IE;ACCEPTUNKNOWN FACIE;SEND USER

CONNECTACK;EXPLICIT

INTERFACEID;ALWAYS

EXPLICIT;ACCEPTMU LAW;EXPLICIT

PRESSCREENING;STATUS INCOMPATIBLE

STATE;STATUSERROR

CAUSE;ACCEPT ALAW;RESTART

INDICATION;FORCED RESTART


0x06F8A87

Online 0 Bit-field used to determine severalbehavior options, which influence how theQ.931 protocol behaves.Mib name:acTrunkISDNCommonQ931LayerResponseBehaviorINI Name: ISDNIBEHAVIORProfile name: Trunk Profile

Incoming Calls

Behavior;DATACONN RS;VOICE

CONN RS;CHAN IDIN FIRST RS;USERSETUP ACK;CHAN

ID IN CALLPROC;PROGR IND

IN SETUP ACK

Integer

BitmaskBitmap-

0x013860

Online 0 This is the bit-field used to determine

several behavior options that influencehow the ISDN Stack INCOMING callsbehave. Refer to the Appendix A.8 'ISDNFlexible Behavior' in the VoPLibReference Library User's ManualDocument #: LTRT-00740.Mib name:acTrunkISDNCommonIncomingCallsBehaviorINI Name: ISDNINCALLSBEHAVIORProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000


DefaultValue

Description


Integer0-65535

Online 0 This is the bit-field used to determineseveral behavior options that influencehow the ISDN Stack OUTGOING calls

behave. Refer to Appendix A.8 in the'VoPLib Reference Library User's Manual.Mib name:acTrunkISDNCommonOutgoingCallsBehaviorINI Name: ISDNOUTCALLSBEHAVIORProfile name: Trunk Profile


CHAN ALLOCALGO;CHAN ID 16ALLOWED;USE T1

PRI;USE E1PRI;START WITH BCHAN OOS;CHAN

ALLOCLOWEST;CHAN

ALLOC HIGHEST


Online 0 This is the bit-field used to determineseveral general ISDN behavior options.Refer to the Appendix A.8 'ISDN FlexibleBehavior' in the VoPLib Reference LibraryUser's Manual Document #: LTRT-00740.

Mib name:acTrunkISDNCommonGeneralCCBehaviorINI Name: ISDNGENERALCCBEHAVIORProfile name: Trunk Profile


2147483647

Read-Only -1 Defines the IUA trunk interface ID value -unsigned integer - in RFC 3057 -SIGTRAN. Default = 0xFFFFFFFF.Mib name:acTrunkISDNCommonIuaInterfaceIdProfile name: Not Profiled


Enum:acDCH-

CONFIG-PRIMARY(0), acDCH-CONFIG-

BACKUP(1),acDCH-

CONFIG-NFAS(2)



ISDN NFAS

Interface ID

Integer

0-255

Online 0 Defines the Interface ID. Works with

NS_EXPLICIT_INTERFACE_ID. Refer tothe VoPLib documentation(ISDN FlexibleBehavior).Default = (unsigned char)-1.


7/23/2019 LTRT-32105 Mediant 3000





DefaultValue

Description


Online 0 Relevant only for T1 ISDN NFAS trunksindicates the group number of the NFASgroup. ;Valid NFAS group numbers are

only 1 to 9, 0 indicating that this trunk isnot NFAS (in this case theISDNNFASInterfaceID and DchConfigparameters are ignored).Mib name:acTrunkISDNNfasGroupNumberINI Name: NFASGROUPNUMBERProfile name: Trunk Profile


Integer0-255

Online 0 Activates / de-activates delivery of rawQ.931 messages. Refer to the VoPLibdocumentation ('ISDN Flexible Behavior').Mib name:

acTrunkISDNCommonDuplicateQ931Buff ModeINI Name:ISDNDUPLICATEQ931BUFFMODEProfile name: Trunk Profile


Online 0 Bit-field used to determine severalbehavior options, which influence how theQ.931 protocol behaves.Refer to the VoPLib documentation (ISDNFlexible Behavior).Mib name:acTrunkISDNCommonNSBehaviour2

INI Name: ISDNNSBEHAVIOUR2Profile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000


Frame: Trunk SIP Provis ioning (TP-8410), Tab: Line Settings

ParameterName


DefaultValue

Description

Line BuildOut Loss

Enum:ac0DB(0), ac7-

5DB(1),ac15DB(2), ac22-

5DB(3)


0 = 0 dB1 = 7.5 dB2 = 15 dB3 = 22.5 dBMib name: acTrunkLineBuildOutLossINI Name: LINEBUILDOUT.LOSS

Profile name: Trunk ProfileLine Build

Out OverwriteEnum:

acNO-OVER-WRITE(0),acOVER-WRITE(1)



Line BuildOut XPM0

Integer0-255

Online 0 Used to control the Framer's XPM0 registervalue (line pulse shape control).



Line BuildOut XPM1

Integer0-255



7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Line BuildOut XPM2

Integer0-255

Online 0 Used to control the Framer's XPM2 registervalue (line pulse shape control).Applicable only when

TrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert users.



Frame: Trunk SIP Provisioning (TP-8410), Tab: CAS Settings

ParameterName


DefaultValue

Description


Integer0-7

Online 0 This parameter determines which CASprotocol file to use on a specific trunk. Theindex value corresponds to the numberconfigured for the parameterCASFileName_X.Range = not greater than the parameterdefining the PSTN CAS Table Num.Mib name: acTrunkCASTablesIndex

INI Name: CASTABLEINDEXProfile name: Trunk Profile




7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.46.5 Tab: SIP Settings

Frame: Trunk SIP Provisioning (TP-8410), Tab: SIP Settings

ParameterName


DefaultValue

Description


ISDN

Enum:NotSet(-1), LocalRB(0),

RemoteRB1(1),RemoteRB8(8)

Instant -1 Override the value of progressindicator to ISDN side in ALERTPROGRESS and PROCEEDINGmessagesMib name:progressIndicatorToISDNValueINI Name:PROGRESSINDICATOR2ISDNProfile name: Trunk Profile

Play RingBack Tone

To Tel


DoNotPlay(0),PlayOnLocal(1),

PreferIp(2),PlayLocalUntilRemoteMed

iaArrives(3)

Instant 2 Enable ringback tone playingtowards trunk side. Refer to User'sManual for detailsMib name:playRBToneToTrunkValueINI Name: PLAYRBTONE2TRUNKProfile name: Trunk Profile

TransferCapability To

ISDN

Enum:DoNotOverwrite(-1),Modem(0), Voice(1),

Data(2), Audio(3)

Instant 0 Send transfer capability to ISDNside on setup message -1:Do notOverwrite 0:Audio 3.1 1:Speech2:Data 3:AudioMib name:

iSDNTransferCapabilityValueINI Name:ISDNTRANSFERCAPABILITYProfile name: Trunk Profile

Local ISDNRB Source

Enum:pbx(0), gateway(1)

Instant 0 If the ringback tone source is not IP,who should supply the Ringbacktone. 0 - PBX/PSTN (default) ; 1-GWMib name:localISDNRBSourceValueINI Name: LOCALISDNRBSOURCEProfile name: Trunk Profile

PI ForDisconnect

Msg

Integer-1-8

Instant -1 Configure PIForDisconnectMsg inorder to overwrite PI value receivedin ISDN Disconnect messageMib name:pIForDisconnectMsgValueINI Name:PIFORDISCONNECTMSGProfile name: Trunk Profile

TrunkTransfer

Mode

Enum:none(0), casNFA(1),

iSDN(2), casNormal(3),QSIGSingleStep(4),

QSIGPathReplacement(5)

Instant 0 The type of transfer the PSTN/PBXsupportsMib name: trunkTransferModeINI Name:

TRUNKTRANSFERMODEProfile name: Trunk Profile

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

PSTN AlertTimeoutValue

Integer-1-600

Instant -1 Max time (in seconds) to wait forconnect from PSTNMib name: pSTNAlertTimeoutValue

INI Name:TRUNKPSTNALERTTIMEOUTProfile name: Trunk Profile

RTP OnlyMode For

Trunk


Disable(0),TransmitReceive(1),

TransmitOnly(2),ReceiveOnly(3)

Instant -1 immediately. -1 - takes theRTPONLYMODE global value pergatewa 0 - regular callestablishment. 1 - The RTP channelopen for Rx And Tx. 2-The RTPchannel open only for Tx 3 -TheRTP channel open only fo RxMib name:rtpOnlyModeForTrunkRtpOnlyMode

ForTrunkINI Name:RTPONLYMODEFORTRUNKProfile name: Trunk Profile

B ChannelNegotiationFor Trunk

Mode


Preferred(0), Exclusive(1),Any(2)

Instant 0 ISDN B-Channel negotiation modefor trunkput MODE_NOT_SET (-1) to useBCHANNELNEGOTIATION perGatewayMib name:acBChannelNegotiationForTrunkMode

INI Name:BCHANNELNEGOTIATIONFORTRUNKProfile name: Trunk Profile

Digital OOSBehavior ForTrunk Value


default(0), Service(1),dChannel(2), Alarm(3),

Block(4)

Offline 0 Digital OOS Behavior for trunk putOOS_NOT_SET (-1) to useDIGITALOOSBEHAVIOR perGatewayMib name:acDigitalOOSBehaviorForTrunkValueINI Name:DIGITALOOSBEHAVIORFORTRUNKProfile name: Trunk Profile

RemoveCalling Name

For TrunkMode



Instant 0 Remove Calling Name For Trunktable .Set (-1) to use the globalparameterdigitalGWextRemoveCallingName.Mib name:acRemoveCallingNameForTrunkModeINI Name:REMOVECALLINGNAMEFORTRUNK


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

CallRerouting

Mode

Enum:none(0),

isdnReroutingEnabled(1)

Instant 0 Call Rerouting Mode. Set to 1 toenable ISDN call reroutingMib name:

acCallReroutingModeForTrunkModeINI Name: CALLREROUTINGMODEProfile name: Trunk Profile

2.47 Frame: UAL Group


Frame: UAL Group , Tab: General Info

ParameterName


DefaultValue

Description

ID Integer0-65534

Online 0 SS7 (Signaling System 7) SIGTRAN(Signaling Transport) Interface Group Id.Mib name: acSS7SigTranIFGroupIdINI Name: SS7_IF_GR_IDProfile name: Not Profiled

Sg Mgc Enum:nat(1), mgc(77),

sg(83)

Online 0 Interface Group function - SignalingGateway (SG) or Media GatewayController (MGC).

Mib name: acSS7SigTranIFGroupSgMgcINI Name: SS7_SIG_SG_MGCProfile name: Not Profiled

SignalingLayer

Enum:noLayer(0),

iua(1), m2ua(2),m3ua(3),

m2tunnel(4),dua(6)

Online 0 UAL type of interface group:0 = none1 = iua2 = m2ua3 = m3ua4 = m2tunnel6 = dua.Mib name:acSS7SigTranIFGroupSignalingLayerINI Name: SS7_SIG_LAYERProfile name: Not Profiled

Traf Mode Enum:override(1),

loadShare(2),broadcast(3)

Online 1 Traffic mode of interface group.Mib name:acSS7SigTranIFGroupTrafModeINI Name: SS7_SIG_TRAF_MODEProfile name: Not Profiled

Recov Timer Integer0-10000000

Online 0 T(r) - recovery timer (in msecs) of interfacegroup.Mib name:acSS7SigTranIFGroupRecovTimerINI Name: SS7_SIG_T_REC


7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Ack Timer Integer0-10000000

Online 0 T(ack) - wait timer for ASP_UP_ACK (inmsecs) of interface group.Mib name:

acSS7SigTranIFGroupAckTimerINI Name: SS7_SIG_T_ACKProfile name: Not Profiled

HB Timer Integer0-10000000

Online 0 T(beat) - Heartbeat Timer (in msecs) ofinterface group.Mib name: acSS7SigTranIFGroupHBTimer INI Name: SS7_SIG_T_HBProfile name: Not Profiled

Min Asp Integer1-10

Online 1 Minimal ASP (Application Server Process)number in interface group(minimum = 1).Mib name: acSS7SigTranIFGroupMinAsp

INI Name: SS7_SIG_MIN_ASPProfile name: Not Profiled

Behavior Integer0-2147483647

Online 0 Behavior bit of interface group.Mib name: acSS7SigTranIFGroupBehavior INI Name: SS7_SIG_BEHAVIOURProfile name: Not Profiled

SCTP Inst Integer0-65534

Read-Only 0 SCTP (Stream Control TransmissionProtocol) instance of interface group.Mib name:acSS7SigTranIFGroupSCTPInstINI Name: SS7_SCTP_INSTANCEProfile name: Not Profiled

SCTP LocalPort

Integer0-2147483647

Online 0 Local SCTP (Stream Control TransmissionProtocol) port of interface group.Mib name:acSS7SigTranIFGroupSCTPLocalPortINI Name: SS7_LOCAL_SCTP_PORTProfile name: Not Profiled

Network Enum:itu(1), ansi(2),

china(3)

Online 0 Network variant of interface group.Mib name: acSS7SigTranIFGroupNetworkINI Name: SS7_SIG_NETWORKProfile name: Not Profiled

SCTP Dest

Port

Integer

0-65534

Online 0 Destination SCTP (Stream Control

Transmission Protocol) port.Mib name:acSS7SigTranIFGroupSCTPDestPortINI Name: SS7_DEST_SCTP_PORTProfile name: Not Profiled

Dest Ip IPAddress Online Destination SCTP (Stream ControlTransmission Protocol) IP address.Mib name: acSS7SigTranIFGroupDestIpINI Name: SS7_DEST_IPProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

SCTP MaxInband

Streams

Integer2-65534

Online 2 Maximum inbound streams in interfacegroup.Mib name:

acSS7SigTranIFGroupSCTPMaxInbStreamsINI Name: SS7_MGC_MX_IN_STREAMProfile name: Not Profiled

SCTP MaxOutbandStreams

Integer2-65534

Online 2 Number of output streams required ininterface group.Mib name:acSS7SigTranIFGroupSCTPMaxOutbStreamsINI Name:SS7_MGC_NUM_OUT_STREAMProfile name: Not Profiled

Rdcy BoardNum

Integer0-255

Online 0 This parameter is used to specify theSIGTRAN (Signaling Transport) groupredundancy board number.Mib name:acSS7SigTranIFGroupRdcyBoardNumINI Name: RDCYBOARDNUMProfile name: Not Profiled

RoutingContext Index

Integer-1-15

Online -1 Entry in Routing Context table, thatcontains the routing context rules for thisinterface group.Mib name:acSS7SigTranIFGroupRoutingContextInde

xINI Name: SS7_SIG_RC_INDEXProfile name: Not Profiled

RoutingContext Value

Integer-1-2147483647

Online -1 Routing context value for this interfacegroup (AS).Mib name:acSS7SigTranIFGroupRoutingContextValueINI Name: SS7_SIG_RC_VALUEProfile name: Not Profiled

NetworkAppearance

Integer-1-2147483647

Online -1 Network Appearance value for thisinterface group (AS).Mib name:acSS7SigTranIFGroupNetworkAppearanceINI Name:SS7_SIG_NETWORK_APPEARANCEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.48 Frame: UAL Interface

2.48.1 Tab: UAL Interface

Frame: UAL Interface, Tab: UAL Interface

ParameterName


DefaultValue

Description

Value Integer0-2147483647

Online 0 SS7 (Signaling System 7) SIGTRAN(Signaling Transport) interface ID value.Mib name: acSS7SigTranIFIDValueINI Name: SS7_SIG_IF_ID_VALUEProfile name: Not Profiled


Online SS7 (Signaling System 7) SIGTRAN(Signaling Transport) interface ID name(text string).Mib name: acSS7SigTranIFIDNameINI Name: SS7_SIG_IF_ID_NAMEProfile name: Not Profiled

Owner Group Integer-1-65534

Online -1 Owner group of interface id.Mib name: acSS7SigTranIFIDOwnerGroupINI Name:SS7_SIG_IF_ID_OWNER_GROUPProfile name: Not Profiled

SignalingLayer

Enum:noLayer(0), iua(1),

m2ua(2),m2tunnel(4),dua(6)

Online -1 UAL Type of interface id:0 = none

1 = iua2 = m2ua4 = m2tunnel6 = duaMib name:acSS7SigTranIFIDSignalingLayerINI Name: SS7_SIG_IF_ID_LAYERProfile name: Not Profiled

Nai Integer-2-124

Online -2 NAI of interface id.Mib name: acSS7SigTranIFIDNaiINI Name: SS7_SIG_IF_ID_NAIProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.49 Frame: V5.2 Interface Frame


Frame: V5.2 Interface Frame, Tab: General Settings

ParameterName


DefaultValue

Description

InterfaceID

Integer-1-

16777215

Online -1 V5 interface identifierMib name: acV5InterfceIdINI Name: V5INTERFACES_V5INTERFACEIDProfile name: Not Profiled

Variant ID Integer

0-127

Online 0 V5 variant identifier

Mib name: acV5InterfceVariantIdINI Name: V5INTERFACES_VARIANTIDProfile name: Not Profiled

Logical C-Channel ID

Integer0-65535

Online 0 Identifies a group of C-pathsMib name: acV5InterfceLogicalCchannelIdINI Name: V5INTERFACES_LOGICALCCHANNELIDProfile name: Not Profiled

TraceLevel

Enum:noTrace(0)

, full-Trace-No-Duplication

(20), full-Trace-With-

Duplication(21),

layer3-Up-Trace-No-Duplication

(22),layer3-Up-

Trace-With-

Duplication

(23)

Online 0 Trace level1:0 - No trace20 - Full trace no duplication21 - Full trace with duplication22 - Layers up trace no duplication

23 - Layers up trace with duplicationMib name: acV5InterfceTraceLevelINI Name: V5INTERFACES_TRACELEVELProfile name: Not Profiled

AdminState

Enum:offline(0),

inService(2)

Read-Only 0 Administrative state of the V5 interface.Changing admin state effects the operational with in95sec. If the acv5InterfceOperationalState valuehasn't changed with in this time - the operation shouldbe regarded as failed.Mib name: acV5InterfceAdminStateINI Name: V5INTERFACES_V5ADMINSTATEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

Operational State

Enum:offline(0),busy(1),

inService(2)

Read-Only 0 The interface's operational state.0 - Offline1 - Interface is being started up

2 - OperationalMib name: acV5InterfceOperationalStateProfile name: Not Profiled

InterfaceType

Enum:v52(1)

Read-Only 0 Type of the V5 interface: V5.1 or V5.2(only V5.2 issupported)Mib name: acV5InterfceTypeINI Name: V5INTERFACES_INTERFACETYPEProfile name: Not Profiled

ProtocolSide

Enum:an-Side(0),le-Side(1)

Read-Only 1 AN or LE side of the V5 protocolMib name: acV5InterfceProtocolSideINI Name: V5INTERFACES_PROTOCOLSIDE

Profile name: Not ProfiledID NotEqual

Enum:cleared(0),raised(1),

unknown(2)

Read-Only 0 Interface Id isn't equal on both sides.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceIdNotEqualProfile name: Not Profiled

Variant NotEqual


unknown(2)

Read-Only 0 Variant Id isn't equal on both sides.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceVariantNotEqual

Profile name: Not ProfiledID CheckTime Out

Error


unknown(2)

Read-Only 0 ID check time out error.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceIDCheckTimeOutErrorProfile name: Not Profiled

L2 StartupFailed


unknown(2)

Read-Only 0 Layer 2 startup failed.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceL2StartupFailed


RestartFailed


unknown(2)

Read-Only 0 Restart failed.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceRestartFailedProfile name: Not Profiled

ControlProtocolData Link

Error


unknown(2)

Read-Only 0 Control protocol data link error.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceControlProtocolDataLinkError Profile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

ParameterName


DefaultValue

Description

LinkControlProtocol

Data LinkError


unknown(2)

Read-Only 0 Link control protocol data link error.0 - cleared - no error1 - raised - error found

2 - unknown - not tested yet.Mib name:acV5InterfceLinkControlProtocolDataLinkErrorProfile name: Not Profiled

BCCProtocolData Link

Error


unknown(2)

Read-Only 0 BCC protocol data link error.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceBCCProtocolDataLinkErrorProfile name: Not Profiled

PSTN

ProtocolData LinkError

Enum:

cleared(0),raised(1),unknown(2

)

Read-Only 0 PSTN protocol data link error.

0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfcePSTNProtocolDataLinkErrorProfile name: Not Profiled

ProtectionDL1 Error


unknown(2)

Read-Only 0 Protection data link 1 error.0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceProtectionDL1ErrorProfile name: Not Profiled

Protection

DL2 Error

Enum:

cleared(0),raised(1),unknown(2

)

Read-Only 0 Protection data link 2 error.

0 - cleared - no error1 - raised - error found2 - unknown - not tested yet.Mib name: acV5InterfceProtectionDL2ErrorProfile name: Not Profiled

Number OfPorts In

Card

Integer0-65533

Online 0 Define the number of the port in the interface cards.Mib name: acV5InterfceNumberOfPortsInCardINI Name:V5INTERFACES_NUMBEROFV5PORTSINCARDProfile name: Not Profiled

EnableRegister

RecallConfigurati

on

Enum:disable(0),

enable(1)

Online 0 In V5.2 Enable configuration of the register recallduration type in the AN.

Mib name:acV5InterfceEnableRegisterRecallConfigurationINI Name:V5INTERFACES_ENABLEREGISTERRECALLCONFIGURATIONProfile name: Not Profiled

RegisterRecall

DurationType

Integer0-65535

Online 0 V5.2 Register Recall duration type value.Mib name: acV5InterfceRegisterRecallDurationTypeINI Name:V5INTERFACES_REGISTERRECALLDURATIONTYPEProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




2.50 Frame: V5.2 Link Frame


Frame: V5.2 Link Frame, Tab: General Settings

ParameterName


DefaultValue

Description

V5.2InterfaceNumber

Integer0-30

Online 0 Points to the V5 interface to which the linkbelongsMib name: acV5LinkInterfaceIndxINI Name:V5LINKS_V5INTERFACEINDEXProfile name: Not Profiled

Link ID Integer-1-16777215

Online -1 Identifier of the V5 linkMib name: acV5LinkIdINI Name: V5LINKS_LINKIDProfile name: Not Profiled

Link Type Enum:normal(0),primary(1),

secondary(2)

Online 0 V5 Link type: primary, secondary or normalMib name: acV5LinkTypeINI Name: V5LINKS_LINKTYPEProfile name: Not Profiled

OperationalState

Enum:operational(0),

blocked(1), failed(2),blockedAndFailed(3)

Read-Only 0 The link's operational state.0 - Operational1 - Link is blocked from use2 - Link is in failed state

3 - link is in failed state but also blockedMib name: acV5LinkOperationalStateProfile name: Not Profiled

Link IDCheck Status

Enum:succes(0), failure(1),

testRejected(2)

Read-Only 0 Link ID check status.Mib name: acV5LinkIdCheckStatusProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.51 Frame: Web Provisioning

2.51.1 Tab: Access Settings

Frame: Web Provisioning, Tab: Access Settings

ParameterName


DefaultValue

Description

Index Enum:administrator(0),

monitoringLevel(1)

Read-Only 1 WEB Access indexMib name:acSysWEBAccessIndexProfile name: Not Profiled

Disable WEB

Config

Enum:

Enable(0), Disable(1)

Offline 0 Enables or disables Web

Configuration.0 = Read And Write mode (default)1 = Read Only modeMib name:acSysWEBConfigDisableINI Name: DISABLEWEBCONFIGProfile name: Not Profiled

User Name StringUp to 60 chars.

Instant WEB Basic user name. Range =String[26]Mib name:acSysWEBAccessUserNameINI Name:WEBACCESSUSERNAMEProfile name: Not Profiled

HTTPS Only Enum:disable(0), enable(1)

Offline 0 Use this parameter to allow onlyHTTPS connections (forcesecurity). When set to 1,unencrypted HTTP (normally, port80) is blocked.Mib name: acSysWEBHTTPSOnlyINI Name: HTTPSONLYProfile name: Not Profiled

User Code StringUp to 60 chars.

Instant WEB Basic userAccessMib name:

acSysWEBAccessUserCodeINI Name:WEBACCESSUSERCODEProfile name: Not Profiled

HTTPS Port Integer0-65535

Offline 443 Determine the local SecureHTTPS port of the device.The default port is 443.Range = 1-65535 (otherrestrictions may apply in thisrange)Mib name: acSysWEBHTTPSPortINI Name: HTTPSPORTProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000




ParameterName


DefaultValue

Description

WebAuthenticatio

n Mode

Enum:BasicMode(0),

DigestModeWhenPossible(

1),DigestModeHTTPOnly(2)

Instant 1 Selects HTTP basic (clear text) ordigest (MD5) authentication for theweb interface.

When set to 0, basic authentication(clear text) will be used.When set to 1, digestauthentication (MD5) will be used.When set to 2, digestauthentication (MD5) will be usedfor HTTP, while basicauthentication will be used forHTTPS.Note that turning on RADIUS loginforces basic authentication.Mib name:acSysWEBAccessWebAuthModeINI Name: WEBAUTHMODEProfile name: Not Profiled

Web UseRadius Login


Instant 0 Uses the RADIUS (RemoteAuthentication Dial-In UserServer/Service) for Web interfaceauthentication.Make sure that ENABLERADIUSis on.Use of this parameter withoutHTTPSONLY = 1 is notrecommended.Mib name:

acSysWEBWebUseRadiusLoginINI Name: WEBRADIUSLOGINProfile name: Not Profiled

WEB DenyAuthenticatio

n Timer

Integer0-86400

Online 0 Defines the time the nextauthentication attempt from thelast authentication faild IP shouldbe denied.

The range can be any value from 0- 86400 in secondsMib name:acSysWEBDenyAuthenticationTim

erINI Name:DENYAUTHENTICATIONTIMERProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

2.51.2 Tab: Access Addresses

Frame: Web Provisioning, Tab: Access Addresses

ParameterName


DefaultValue

Description

Index Integer0-9

Read-Only 1 WEB ACL (Access Control List) index.Mib name: acSysWEBACLIndexProfile name: Not Profiled

IP Address IP Address Instant 0 Allows IP addresses to connect to the Webinterface. Set to zeroes to allow all IPaddresses.Range: Valid IP address

Mib name: acSysWEBACLIP

INI Name: WEBACCESSLISTProfile name: Not Profiled

7/23/2019 LTRT-32105 Mediant 3000



OAM Guide 3. Performance Monitoring Parameters for the Mediant 3000

3 Performance Monitoring Parameters for

the Mediant 3000Customers are often faced with a complex VoIP network with little or no information onthe status and capacities of each component in it. PM helps the system architectdesign a better network. PM helps operators discover malfunctioning devices beforethey start causing a problem on the production network.

The system provides two types of performance measurements:

1. Gauges: Gauges represent the current state of a PM parameter in the system.Gauges, unlike counters, can decrease in value, and like counters, can increase.

2. Counters: Counters always increase in value and are cumulative. Counters,unlike gauges, never decrease in value unless the system is reset. The countersare then zeroed.

Performance measurements are available for the EMS or for a 3rd party performancemonitoring system through an SNMP interface. These measurements can be polled atscheduled intervals by an external poller or utility in a media server or another off-device system.

PM measurements can be divided into two main groups:

1. Real-Time PM Measurements - supply the current value of the PM entity. Whenrequested, the entity is sampled and the current value is received.

2. History PM Measurements - supply statistical data of the PM entity during the lastinterval period. These measurements include the Average, Minimum andMaximum values of the entity during the last interval. The default interval length is

15 minutes.

Figure 1: History PM Measurements

Performance is usually measured in a constant time interval to which all elements aresynchronized. Intervals start on the hour - expiring at 12:00:00, 12:15:00, 12:30:00,12:45:00, etc. This allows synchronization of several elements in the system to thesame interval time frame. Note that the first interval after start-up is always shorter (inthe example above, the first interval only lasts 6 minutes - so that a new interval canstart at 11:30:00).

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

3.1 Frame: DS3 Monitoring (History)

3.1.1 Tab: DS3 Statistics

Frame: DS3 Monitoring (History), Tab: DS3 Statistics

EMS Parameter Name RT /Hist

Gauge /Counter

Parameter Description

DS3 PESs HIST Gauge The counter associated with the number of P-bitErrored Seconds.Mib name: dsx3IntervalPESs

DS3 PSESs HIST Gauge The counter associated with the number of P-bitSeverely Errored Seconds.Mib name: dsx3IntervalPSESs

DS3 UASs HIST Gauge The counter associated with the number ofUnavailable Seconds. This object may decrease if theoccurrence of unavailable seconds occurs across aninterval boundary.Mib name: dsx3IntervalUASs

DS3 LCVs HIST Gauge The counter associated with the number of LineCoding Violations.Mib name: dsx3IntervalLCVs

DS3 PCVs HIST Gauge The counter associated with the number of P-bitCoding Violations.Mib name: dsx3IntervalPCVs

DS3 LESs HIST Gauge The number of Line Errored Seconds (BPVs or illegalzero sequences).Mib name: dsx3IntervalLESs

DS3 CCVs HIST Gauge The number of C-bit Coding Violations.Mib name: dsx3IntervalCCVs

DS3 CESs HIST Gauge The number of C-bit Errored Seconds.Mib name: dsx3IntervalCESs

DS3 CSESs HIST Gauge The number of C-bit Severely Errored Seconds.Mib name: dsx3IntervalCSESs

7/23/2019 LTRT-32105 Mediant 3000




3.2 Frame: DS3 Monitoring (Real-Time)

3.2.1 Tab: DS3 Statistics

Frame: DS3 Monitoring (Real-Time), Tab: DS3 Statisti cs


Gauge /Counter


DS3 PESs RT Gauge The counter associated with the number of P-bitErrored Seconds.Mib name: dsx3CurrentPESs

DS3 PSESs RT Gauge The counter associated with the number of P-bitSeverely Errored Seconds.

Mib name: dsx3CurrentPSESsDS3 UASs RT Gauge The counter associated with the number of

Unavailable Seconds.Mib name: dsx3CurrentUASs

DS3 LCVs RT Gauge The counter associated with the number of LineCoding Violations.Mib name: dsx3CurrentLCVs

DS3 PCVs RT Gauge The counter associated with the number of P-bitCoding Violations.Mib name: dsx3CurrentPCVs

DS3 LESs RT Gauge The number of Line Errored Seconds.

Mib name: dsx3CurrentLESs

DS3 CCVs RT Gauge The number of C-bit Coding Violations.Mib name: dsx3CurrentCCVs

DS3 CESs RT Gauge The number of C-bit Errored Seconds.Mib name: dsx3CurrentCESs

DS3 CSESs RT Gauge The number of C-bit Severely Errored Seconds.Mib name: dsx3CurrentCSESs

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

3.3 Frame: Fiber Group Monitoring (Real-Time)

3.3.1 Tab: Fiber Group Statistics

Frame: Fiber Group Moni toring (Real-Time), Tab: Fiber Group Statistics


Gauge /Counter


Section ESs RT Gauge The counter associated with the number of ErroredSeconds encountered by a SONET/SDH Section inthe current 15 minute interval.Mib name: sonetSectionCurrentESs

Section SESs RT Gauge The counter associated with the number of Severely

Errored Seconds encountered by a SONET/SDHSection in the current 15 minute interval.Mib name: sonetSectionCurrentSESs

Section CVs RT Gauge The counter associated with the number of CodingViolations encountered by a SONET/SDH Section inthe current 15 minute interval.Mib name: sonetSectionCurrentCVs

Line ESs RT Gauge The counter associated with the number of ErroredSeconds encountered by a SONET/SDH Line in thecurrent 15 minute interval.Mib name: sonetLineCurrentESs

Line SESs RT Gauge The counter associated with the number of SeverelyErrored Seconds encountered by a SONET/SDH Linein the current 15 minute interval.Mib name: sonetLineCurrentSESs

Line CVs RT Gauge The counter associated with the number of CodingViolations encountered by a SONET/SDH Line in thecurrent 15 minute interval.Mib name: sonetLineCurrentCVs

Line UASs RT Gauge The counter associated with the number ofUnavailable Seconds encountered by a SONET/SDHLine in the current 15 minute interval.Mib name: sonetLineCurrentUASs

Path ESs RT Gauge The counter associated with the number of ErroredSeconds encountered by a SONET/SDH Path in thecurrent 15 minute interval.Mib name: sonetPathCurrentESs

Path SESs RT Gauge The counter associated with the number of SeverelyErrored Seconds encountered by a SONET/SDHPath in the current 15 minute interval.Mib name: sonetPathCurrentSESs

Path CVs RT Gauge The counter associated with the number of CodingViolations encountered by a SONET/SDH Path in thecurrent 15 minute interval.

Mib name: sonetPathCurrentCVs

7/23/2019 LTRT-32105 Mediant 3000





Gauge /Counter


Path UASs RT Gauge The counter associated with the number ofUnavailable Seconds encountered by a Path in thecurrent 15 minute interval.

Mib name: sonetPathCurrentUASs

3.4 Frame: Gateway System Monitoring (Configuration)

3.4.1 Tab: System IP

Frame: Gateway System Monitoring (Configuration), Tab: System IP

EMS Parameter Name RT /

Hist

Gauge /

Counter


Number of OutgoingKBytes

HIST Counter Counts the total number of outgoing Kbytes (1000bytes) from the interface during the last interval.Mib name: acPMNetUtilKBytesVolumeTx

Number of IncomingKBytes

HIST Counter Counts the total number of Kbytes (1000 bytes)received on the interface, including those received inerror, during the last interval.Mib name: acPMNetUtilKBytesVolumeRx

Number of OutgoingPkts

HIST Counter Counts the total number of outgoing Packets from theinterface during the last interval.Mib name: acPMNetUtilPacketsVolumeTx

Number of IncomingPkts

HIST Counter Counts the total number of Packets received on theinterface, including those received in error, during thelast interval.Mib name: acPMNetUtilPacketsVolumeRx

Number of IncomingDiscarded Pkts

HIST Counter Counts the total number of malformed IP Packetsreceived on the interface during the last interval.These are packets which are corrupted or discardeddue to errors in their IP headers, including badchecksums, version number mismatch, other formaterrors, time-to-live exceeded, errors discovered inprocessing their IP options, etc.

Mib name: acPMNetUtilDiscardedPacketsVal

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

3.4.2 Tab: VoP Call Statistics

Frame: Gateway System Monitoring (Configuration), Tab: VoP Call Statistics


Gauge /Counter


Num of ActiveContexts Avg

HIST Gauge Indicates the average number of voice calls connectedon the gateway since the last clear.Mib name: acPMActiveContextCountAverage

Num of ActiveContexts Min

HIST Gauge Indicates the minimum number of voice callsconnected on the gateway since the last clear.Mib name: acPMActiveContextCountMin

Num of ActiveContexts Max

HIST Gauge Indicates the maximum number of voice callsconnected on the gateway since the last clear.

Mib name: acPMActiveContextCountMaxG711 Active Calls Avg HIST Gauge Indicates the average number of G.711 calls present

on the TPM.Mib name: acPMChannelsPerCoderAverageG711

G723 Active Calls Avg HIST Gauge Indicates the average number of G.723 calls presenton the TPM. This attribute is only displayed if theG.723 Codec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageG723

G728 Active Calls Avg HIST Gauge Indicates the average number of G.728 calls presenton the TPM. This attribute is only displayed if theG.728 Codec is provisioned on the DSP template.

Mib name: acPMChannelsPerCoderAverageG728G729a Active Calls

AvgHIST Gauge Indicates the average number of G.729a calls present

on the TPM. This attribute is only displayed if theG.729a Codec is provisioned on the DSP.Mib name: acPMChannelsPerCoderAverageG729a

G729e Active CallsAvg

HIST Gauge Indicates the average number of G.729e calls presenton the TPM. This attribute is only displayed if theG.729e Codec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageG729e

AMR Active Calls Avg HIST Gauge Indicates the average number of AMR calls present onthe TPM. This attribute is only displayed if the AMRCodec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageAMR

EVRC Active Calls Avg HIST Gauge Indicates the average number of EVRC calls presenton the TPM. This attribute is only displayed if theEVRC Codec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageEVRC

Rx RTP Packet LossMax

HIST Gauge Indicates the Max Rx RTP Packet loss (reported byRTCP) per TPM, up to this point in time during thecollection interval, as indicated by the time Interval.Mib name: acPMModuleRTPPacketLossRxMax

7/23/2019 LTRT-32105 Mediant 3000





Gauge /Counter


Tx RTP Packet LossMax

HIST Gauge Indicates the Max Tx RTP Packet loss (reported byRTCP) per TPM, up to this point in time during thecollection interval, as indicated by the time Interval.

Mib name: acPMModuleRTPPacketLossTxMax

RTP delay Average HIST Gauge Indicates the average RTP packets delay per TPM, upto this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketDelayAverage

RTP delay Max HIST Gauge Indicates the maximum RTP packets delay per TPM,up to this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketDelayMax

RTP delay Min HIST Gauge Indicates the minimum RTP packets delay per TPM,up to this point in time during the collection interval, as

indicated by the time Interval.Mib name: acPMModulePacketDelayMin

RTP jitter Average HIST Gauge Indicates the average RTP packets jitter per TPM, upto this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketJitterAverage

RTP jitter Min HIST Gauge Indicates the minimum RTP packets jitter per TPM, upto this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketJitterMin

RTP jitter Max HIST Gauge Indicates the maximum RTP packets jitter per TPM, up

to this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketJitterMax

Rx RTP Bytes Max HIST Gauge Indicates the Max Tx RTP Bytes per TPM, up to thispoint in time during the collection interval, as indicatedby the time Interval.Mib name: acPMModuleRTPBytesRxMax

Tx RTP Bytes Max HIST Gauge Indicates the Max Rx RTP Bytes per TPM, up to thispoint in time during the collection interval, as indicatedby the time Interval.Mib name: acPMModuleRTPBytesTxMax

Rx RTP Packets Max HIST Gauge Indicates the Max Rx RTP Packets per TPM, up to thispoint in time during the collection interval, as indicatedby the time Interval.Mib name: acPMModuleRTPPacketsRxMax

Tx RTP Packets Max HIST Gauge Indicates the Max Tx RTP Packets per TPM, up to thispoint in time during the collection interval, as indicatedby the time Interval.Mib name: acPMModuleRTPPacketsTxMax

RTCP XR AverageConversational R

Factor

HIST Gauge Average conversational R factor.Mib name: rtcpXrHistoryAvgRCQ

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000


Gauge /Counter


RTCP XR MaximumConversational R

Factor

HIST Gauge Maximum conversational R factor.Mib name: rtcpXrHistoryMaxRCQ

RTCP XR MinimumConversational R

Factor

HIST Gauge Minimum conversational R factor.Mib name: rtcpXrHistoryMinRCQ

3.4.3 Tab: Common Control

Frame: Gateway System Monitoring (Configuration), Tab: Common Control


Gauge /Counter


Lifetime in seconds Avg HIST Counter Indicates the Connection lifetime, in seconds.Mib name: acPMCPConnectionLifetimeAverage

Lifetime in seconds Min HIST Counter Indicates the Connection lifetime, in seconds.Mib name: acPMCPConnectionLifetimeMin

Lifetime in secondsMax

HIST Counter Indicates the Connection lifetime, in seconds.Mib name: acPMCPConnectionLifetimeMax

MGC responsecounters

HIST Counter Indicates the MGC response counters.Mib name: acPMCPCommandCounterValRx

MGC commandcounters

HIST Counter Indicates the MGC command counters.Mib name: acPMCPCommandCounterValTx

MGC Rxretransmissions

HIST Counter Counts the number of incoming retransmissions.Mib name: acPMCPRetransmissionCountValRx

MGC Txretransmissions

HIST Counter Counts the number of transactions retransmissionssent from the board.Mib name: acPMCPRetransmissionCountValTx

Call Attempts Per SecAverage

HIST Counter Average of call attempts (successful andunsuccessful) per second, during last interval.Mib name: acPMCPCallAttemptsPerSecAverage

Call Attempts Per SecMax

HIST Counter Maximum of call attempts (successful andunsuccessful) per second, during last interval.

Mib name: acPMCPCallAttemptsPerSecMaxCall Attempts Per Sec

MinHIST Counter Minimum of call attempts (successful and

unsuccessful) per second, during last interval.Mib name: acPMCPCallAttemptsPerSecMin

7/23/2019 LTRT-32105 Mediant 3000




3.4.4 Tab: MEGACO Control

Frame: Gateway System Monitoring (Configuration), Tab: MEGACO Control

EMS ParameterName

RT /Hist

Gauge /Counter


[H.248] Num ofActive Contexts

Avg

HIST Gauge Indicates the Average number of H.248 active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountAverageMegaco


Min

HIST Gauge Indicates the Minimum number of H.248 active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMinMegaco

[H.248] Num ofActive ContextsMax

HIST Gauge Indicates the Maximum number of H.248 active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMaxMegaco

[H.248] ServiceChange

Command -Disconnected

HIST Counter Counts the Disconnected service change commands sent(excluding retransmission) to the current MGC, during lastinterval.Mib name: acPMMegacoServiceChangeCountValdisconnected


Command -Restart

HIST Counter Counts the Restart service change commands (excludingretransmission) sent to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValrestart


Command -Forced

HIST Counter Counts the Forced service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValforced


Command -Graceful

HIST Counter Counts the Graceful service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValgraceful


Command -

FailOver

HIST Counter Counts the number of times the TPM performed failoverprocedures and attempted contact with another controller,during the last interval.

Mib name: acPMMegacoServiceChangeCountValfailOver[H.248] Service

ChangeCommand -

Handoff

HIST Counter Counts the number of times the TPM performed Handoffprocedures and attempted contact with another controller duringthe last interval.Mib name: acPMMegacoServiceChangeCountValhandoff

Success [H.248]Add

HIST Counter Counts the number of successful Add commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValAdd

Success [H.248]Move

HIST Counter Counts the number of successful Move commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValMove

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

EMS ParameterName

RT /Hist

Gauge /Counter


Success [H.248]Modify

HIST Counter Counts the number of successful Modify commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValModify

Success [H.248]Subtract

HIST Counter Counts the number of successful Subtract commands, duringthe last interval.Mib name: acPMCPCmdSuccessCountValSubtract

Success [H.248]Service Change

HIST Counter Counts the number of successful Service Change commands,during the last interval.Mib name: acPMCPCmdSuccessCountValSc

Success [H.248]Audit-Value

HIST Counter Counts the number of successful Audit Value commands,during the last interval.Mib name: acPMCPCmdSuccessCountValAuditValue

Success [H.248]

Audit-Capabilities

HIST Counter Counts the number of successful Audit Capabilities commands,

during the last interval.Mib name: acPMCPCmdSuccessCountValAuditCap

Success [H.248]Notify

HIST Counter Counts the number of successful Notify commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValNotify

Failed [H.248]Add

HIST Counter Counts the number of Add commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValAdd

Failed [H.248]Move

HIST Counter Counts the number of Move commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValMove

Failed [H.248]Modify

HIST Counter Counts the number of Modify commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValModify

Failed [H.248]Subtract

HIST Counter Counts the number of Subtract commands failure, during thelast interval.Mib name: acPMCPCmdFailureCountValSubtract

Failed [H.248]Service Change

HIST Counter Counts the number of Service Change commands failure,during the last interval.Mib name: acPMCPCmdFailureCountValSc

Failed [H.248]Audit-Value

HIST Counter Counts the number of Audit Value commands failure, during thelast interval.

Mib name: acPMCPCmdFailureCountValAuditValue

Failed [H.248]Audit-

Capabilities

HIST Counter Counts the number of Audit Capabilities commands failure,during the last interval.Mib name: acPMCPCmdFailureCountValAuditCap

Failed [H.248]Notify

HIST Counter Counts the number of Notify commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValNotify

7/23/2019 LTRT-32105 Mediant 3000




3.4.5 Tab: MGCP Control

Frame: Gateway System Monitoring (Configuration), Tab: MGCP Control

EMS ParameterName

RT /Hist

Gauge /Counter


[MGCP] Num ofActive Contexts

Avg

HIST Gauge Indicates the Average number of MGCP active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountAverageMgcp


Min

HIST Gauge Indicates the Minimum number of MGCP active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMinMgcp


Max

HIST Gauge Indicates the Maximum number of MGCP active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMaxMgcp

[MGCP] RSIPCommand -

Disconnected

HIST Counter Counts the Disconnected service change commands sent(excluding retransmission) to the current MGC, during the lastinterval.Mib name: acPMMGCPRsipReasonCountValDisconnected


Restart

HIST Counter Counts the Restart service change commands (excludingretransmission) sent to the current MGC, during the lastinterval.Mib name: acPMMGCPRsipReasonCountValRestart


Forced

HIST Counter Counts the Forced service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMGCPRsipReasonCountValForced


Graceful

HIST Counter Counts the Graceful service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMGCPRsipReasonCountValGraceful

Success[MGCP]Endpoint

ConfigurationCommand

HIST Counter Counts the number of successful Endpoint Conf commands,during the last interval.Mib name: acPMMGCPCommandSuccessCountValAdd

Success

[MGCP] CreateConnectionCommand

HIST Counter Counts the number of successful Create Connection

commands, during the last interval.Mib name: acPMMGCPCommandSuccessCountValMove

Success[MGCP] Modify

ConnectionCommand

HIST Counter Counts the number of successful Modify commands, during thelast interval.Mib name: acPMMGCPCommandSuccessCountValModify

Success[MGCP] Delete

ConnectionCommand

HIST Counter Counts the number of successful Delete Connectioncommands, during the last interval.Mib name: acPMMGCPCommandSuccessCountValSubtract

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

EMS ParameterName

RT /Hist

Gauge /Counter


Success[MGCP]

Notification

RequestCommand

HIST Counter Counts the number of successful Notification Requestcommands, during the last interval.Mib name: acPMMGCPCommandSuccessCountValSc

Success[MGCP] Notify

Command

HIST Counter Counts the number of successful Notify commands, during thelast interval.Mib name: acPMMGCPCommandSuccessCountValAuditValue

Success[MGCP] Audit-

EndpointCommand

HIST Counter Counts the number of successful Audit Endpoint commands,during the last interval.Mib name: acPMMGCPCommandSuccessCountValAuditCap

Success[MGCP] Audit

ConnectionCommand

HIST Counter Counts the number of successful Audit Connection commands,during the last interval.

Mib name: acPMMGCPCommandSuccessCountValNotify

Failed [MGCP]Endpoint


HIST Counter Counts the number of Endpoint Conf commands failure, duringthe last interval.Mib name: acPMMGCPCommandFailureCountValAdd

Failed [MGCP]Create

ConnectionCommand

HIST Counter Counts the number of Create Connection commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValMove

Failed [MGCP]

ModifyConnectionCommand

HIST Counter Counts the number of Modify commands failure, during the last

interval.Mib name: acPMMGCPCommandFailureCountValModify

Failed [MGCP]Delete

ConnectionCommand

HIST Counter Counts the number of Delete Connection commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValSubtract

Failed [MGCP]Notification

RequestCommand

HIST Counter Counts the number of Notification Request commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValSc

Failed [MGCP]Notify Command HIST Counter Counts the number of Notify commands failure, during the lastinterval.Mib name: acPMMGCPCommandFailureCountValAuditValue

Failed [MGCP]Audit-Endpoint

Command

HIST Counter Counts the number of Audit Endpoint commands failure, duringthe last interval.Mib name: acPMMGCPCommandFailureCountValAuditCap

Failed [MGCP]Audit-

ConnectionCommand

HIST Counter Counts the number of Audit Connection commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValNotify

7/23/2019 LTRT-32105 Mediant 3000




3.4.6 Tab: SIP IP to Tel

Frame: Gateway System Moni tori ng (Configuration), Tab: SIP IP to Tel


Gauge /Counter


IP to Tel Number ofCall Attempts

HIST Counter Indicates the number of attempted calls for IP to Teldirection, during last interval.Mib name: acPMSIPAttemptedCallsValIP2Tel

IP to Tel Number ofEstablished Calls

HIST Counter Indicates the number of established calls for IP to Teldirection, during last interval.Mib name: acPMSIPEstablishedCallsValIP2Tel

IP to Tel Number ofCalls Terminated due

to a Busy Line

HIST Counter Indicates the number of calls that failed as a result ofa busy line for IP to Tel direction, during last interval.Mib name: acPMSIPBusyCallsValIP2Tel


to No Answer

HIST Counter Indicates the number of calls that weren't answeredfor IP to Tel direction, during last interval.Mib name: acPMSIPNoAnswerCallsValIP2Tel


to Forward

HIST Counter Indicates the number of calls that were terminateddue to a call forward for IP to Tel direction, during lastinterval.Mib name: acPMSIPForwardedCallsValIP2Tel

IP to Tel Number ofFailed Calls due to No

Route

HIST Counter Indicates the number of calls whose destinationsweren't found for IP to Tel direction, during lastinterval.Mib name: acPMSIPNoRouteCallsValIP2Tel

IP to Tel Number ofFailed Calls due to NoMatched Capabilities

HIST Counter Indicates the number of calls that failed due tomismatched media server capabilities for IP to Teldirection, during last interval.Mib name: acPMSIPNoMatchCallsValIP2Tel


Resources

HIST Counter Indicates the number of calls that failed due tounavailable resources or a media server lock for IP toTel direction, during last interval.Mib name: acPMSIPNoResourcesCallsValIP2Tel

IP to Tel Number ofFailed Calls due to

Other reasons

HIST Counter This counter is incremented as a result of calls thatfail due to reasons not covered by the other countersfor IP to Tel direction, during last interval.Mib name: acPMSIPFailCallsValIP2Tel

IP to Tel Average CallDuration [sec]

HIST Gauge Indicates the average call duration of establishedcalls for IP to Tel direction, during last interval.Mib name: acPMSIPCallDurationAverageIP2Tel

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

3.4.7 Tab: SIP Tel to IP

Frame: Gateway System Monitoring (Configuration), Tab: SIP Tel to IP


Gauge /Counter


Tel to IP Number ofCall Attempts

HIST Counter Indicates the number of attempted calls for Tel to IPdirection, during last interval.Mib name: acPMSIPAttemptedCallsValTel2IP

Tel to IP Number ofEstablished Calls

HIST Counter Indicates the number of established calls for Tel to IPdirection, during last interval.Mib name: acPMSIPEstablishedCallsValTel2IP

Tel to IP Number ofCalls Terminated due

to a Busy Line

HIST Counter Indicates the number of calls that failed as a result ofa busy line for Tel to IP direction, during last interval.

Mib name: acPMSIPBusyCallsValTel2IPTel to IP Number of

Calls Terminated dueto No Answer

HIST Counter Indicates the number of calls that weren't answeredfor Tel to IP direction, during last interval.Mib name: acPMSIPNoAnswerCallsValTel2IP


to Forward

HIST Counter Indicates the number of calls that were terminateddue to a call forward for Tel to IP direction, during lastinterval.Mib name: acPMSIPForwardedCallsValTel2IP

Tel to IP Number ofFailed Calls due to No

Route

HIST Counter Indicates the number of calls whose destinationsweren't found for Tel to IP direction, during lastinterval.

Mib name: acPMSIPNoRouteCallsValTel2IPTel to IP Number of

Failed Calls due to NoMatched Capabilities

HIST Counter Indicates the number of calls that failed due tomismatched media server capabilities for Tel to IPdirection, during last interval.Mib name: acPMSIPNoMatchCallsValTel2IP


Resources

HIST Counter Indicates the number of calls that failed due tounavailable resources or a media server lock for Telto IP direction, during last interval.Mib name: acPMSIPNoResourcesCallsValTel2IP

Tel to IP Number ofFailed Calls due to

Other reasons

HIST Counter This counter is incremented as a result of calls thatfail due to reasons not covered by the other countersfor Tel to IP direction, during last interval.Mib name: acPMSIPFailCallsValTel2IP

Tel to IP Average CallDuration [sec]

HIST Gauge Indicates the average call duration of establishedcalls for Tel to IP direction, during last interval.Mib name: acPMSIPCallDurationAverageTel2IP

7/23/2019 LTRT-32105 Mediant 3000




3.4.8 Tab: Trunk Statistics

Frame: Gateway System Monitoring (Configuration), Tab: Trunk Statistics


Gauge /Counter


Trunk utilization Avg HIST Gauge Indicates the Average of simultaneously busy DS0channels on this Trunk up to this point in time duringthe collection interval, as indicated by the TimeInterval. A busy channel is when the Physical DS0Termination isn't in Null context or OOS. A Trunk iseither E1 or T1.Mib name: acPMTrunkUtilizationAverage

Trunk utilization Min HIST Gauge Indicates the Minimum of simultaneously busy DS0channels on this Trunk up to this point in time during

the collection interval, as indicated by the TimeInterval. A busy channel is when the Physical DS0Termination isn't in Null context or OOS. A Trunk iseither E1 or T1.Mib name: acPMTrunkUtilizationMin

Trunk utilization Max HIST Gauge Indicates the Maximum of simultaneously busy DS0channels on this Trunk up to this point in time duringthe collection interval, as indicated by the TimeInterval. A busy channel is when the Physical DS0Termination isn't in Null context or OOS. A Trunk iseither E1 or T1.Mib name: acPMTrunkUtilizationMax

Trunk Errored Seconds HIST Gauge Indicates the number of Errored Seconds.Mib name: dsx1IntervalESs

Trunk Controlled SlipSeconds

HIST Gauge Indicates the number of Controlled Slip Seconds.Mib name: dsx1IntervalCSSs

Trunk Path CodingViolations

HIST Gauge Indicates the number of Path Coding Violations.Mib name: dsx1IntervalPCVs

Trunk Bursty ErroredSeconds

HIST Gauge Indicates the number of Bursty Errored Seconds.Mib name: dsx1IntervalBESs

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

3.4.9 Tab: SS7 Linkset

Frame: Gateway System Monitoring (Configuration), Tab: SS7 Linkset

EMSParameter

Name

RT /Hist

Gauge /Counter


SS7 LinkSetSN0 Out ofService %

HIST Counter Percent of interval time for which gauge is above what wasdetermined as the high threshold. In this case - 'Out Of Service'.Mib name:acPMSS7SN0LSOutOfServiceTimeAboveHighThreshold



3.4.10 Tab: SS7 Link

Frame: Gateway System Monitoring (Configuration), Tab: SS7 Link

EMS ParameterName

RT /Hist

Gauge /Counter


SS7 LinkTransmitted

LSSU's

HIST Counter Value of gauge or counter.Mib name: acPMSS7TxLSSUVal

SS7 LinkReceived LSSU's

HIST Counter Value of gauge or counter.Mib name: acPMSS7RxLSSUVal

SS7 LinkTransmitted

FISU's

HIST Counter Value of gauge or counter.Mib name: acPMSS7TxFISUVal

SS7 LinkReceived FISU's

HIST Counter Value of gauge or counter.Mib name: acPMSS7RxFISUVal

SS7 LinkDiscarded MSU's

HIST Counter Value of gauge or counter.Mib name: acPMSS7DiscMSUVal

SS7 Link InService %

HIST Counter Percent of interval time for which gauge is above what wasdetermined as the high threshold. In this case - 'In Service'.Mib name: acPMSS7InServiceTimeAboveHighThreshold

SS7 Link Out OfService %

HIST Counter Percent of interval time for which gauge is above what wasdetermined as the high threshold. In this case - 'Out OfService'.Mib name: acPMSS7OutOfServiceTimeAboveHighThreshold

7/23/2019 LTRT-32105 Mediant 3000




3.5 Frame: Gateway System Monitoring (History)


Frame: Gateway System Monito ring (History), Tab: System IP


Gauge /Counter



HIST Counter Counts the total number of outgoing Kbytes (1000bytes) from the interface during the last interval.Mib name: acPMNetUtilKBytesVolumeTx


HIST Counter Counts the total number of Kbytes (1000 bytes)received on the interface, including those received inerror, during the last interval.Mib name: acPMNetUtilKBytesVolumeRx


HIST Counter Counts the total number of outgoing Packets from theinterface during the last interval.Mib name: acPMNetUtilPacketsVolumeTx


HIST Counter Counts the total number of Packets received on theinterface, including those received in error, during thelast interval.Mib name: acPMNetUtilPacketsVolumeRx


HIST Counter Counts the total number of malformed IP Packetsreceived on the interface during the last interval.These are packets which are corrupted or discardeddue to errors in their IP headers, including badchecksums, version number mismatch, other formaterrors, time-to-live exceeded, errors discovered inprocessing their IP options, etc.Mib name: acPMNetUtilDiscardedPacketsVal


Frame: Gateway System Monitor ing (History), Tab: VoP Call Statis tics

EMS Parameter Name RT /

Hist

Gauge /

Counter


Num of ActiveContexts Avg

HIST Gauge Indicates the average number of voice calls connectedon the gateway since the last clear.Mib name: acPMActiveContextCountAverage

Num of ActiveContexts Min

HIST Gauge Indicates the minimum number of voice callsconnected on the gateway since the last clear.Mib name: acPMActiveContextCountMin

Num of ActiveContexts Max

HIST Gauge Indicates the maximum number of voice callsconnected on the gateway since the last clear.Mib name: acPMActiveContextCountMax

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000


Gauge /Counter


G711 Active Calls Avg HIST Gauge Indicates the average number of G.711 calls presenton the TPM.Mib name: acPMChannelsPerCoderAverageG711



G729a Active CallsAvg

HIST Gauge Indicates the average number of G.729a calls presenton the TPM. This attribute is only displayed if theG.729a Codec is provisioned on the DSP.

Mib name: acPMChannelsPerCoderAverageG729a

G729e Active CallsAvg

HIST Gauge Indicates the average number of G.729e calls presenton the TPM. This attribute is only displayed if theG.729e Codec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageG729e

AMR Active Calls Avg HIST Gauge Indicates the average number of AMR calls present onthe TPM. This attribute is only displayed if the AMRCodec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageAMR

EVRC Active Calls Avg HIST Gauge Indicates the average number of EVRC calls presenton the TPM. This attribute is only displayed if the

EVRC Codec is provisioned on the DSP template.Mib name: acPMChannelsPerCoderAverageEVRC

Rx RTP Packet LossMax

HIST Gauge Indicates the Max Rx RTP Packet loss (reported byRTCP) per TPM, up to this point in time during thecollection interval, as indicated by the time Interval.Mib name: acPMModuleRTPPacketLossRxMax

Tx RTP Packet LossMax

HIST Gauge Indicates the Max Tx RTP Packet loss (reported byRTCP) per TPM, up to this point in time during thecollection interval, as indicated by the time Interval.Mib name: acPMModuleRTPPacketLossTxMax

RTP delay Average HIST Gauge Indicates the average RTP packets delay per TPM, up

to this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketDelayAverage

RTP delay Max HIST Gauge Indicates the maximum RTP packets delay per TPM,up to this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketDelayMax

RTP delay Min HIST Gauge Indicates the minimum RTP packets delay per TPM,up to this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketDelayMin

7/23/2019 LTRT-32105 Mediant 3000





Gauge /Counter


RTP jitter Average HIST Gauge Indicates the average RTP packets jitter per TPM, upto this point in time during the collection interval, asindicated by the time Interval.

Mib name: acPMModulePacketJitterAverage

RTP jitter Min HIST Gauge Indicates the minimum RTP packets jitter per TPM, upto this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketJitterMin

RTP jitter Max HIST Gauge Indicates the maximum RTP packets jitter per TPM, upto this point in time during the collection interval, asindicated by the time Interval.Mib name: acPMModulePacketJitterMax

Rx RTP Bytes Max HIST Gauge Indicates the Max Tx RTP Bytes per TPM, up to thispoint in time during the collection interval, as indicated

by the time Interval.Mib name: acPMModuleRTPBytesRxMax

Tx RTP Bytes Max HIST Gauge Indicates the Max Rx RTP Bytes per TPM, up to thispoint in time during the collection interval, as indicatedby the time Interval.Mib name: acPMModuleRTPBytesTxMax

Rx RTP Packets Max HIST Gauge Indicates the Max Rx RTP Packets per TPM, up to thispoint in time during the collection interval, as indicatedby the time Interval.Mib name: acPMModuleRTPPacketsRxMax

Tx RTP Packets Max HIST Gauge Indicates the Max Tx RTP Packets per TPM, up to this

point in time during the collection interval, as indicatedby the time Interval.Mib name: acPMModuleRTPPacketsTxMax

RTCP XR AverageConversational R

Factor

HIST Gauge Average conversational R factor.Mib name: rtcpXrHistoryAvgRCQ

RTCP XR MaximumConversational R

Factor

HIST Gauge Maximum conversational R factor.Mib name: rtcpXrHistoryMaxRCQ

RTCP XR MinimumConversational R

Factor

HIST Gauge Minimum conversational R factor.Mib name: rtcpXrHistoryMinRCQ

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000


Frame: Gateway System Monitoring (History), Tab: Common Control


Gauge /Counter


Lifetime in seconds Avg HIST Counter Indicates the Connection lifetime, in seconds.Mib name: acPMCPConnectionLifetimeAverage

Lifetime in seconds Min HIST Counter Indicates the Connection lifetime, in seconds.Mib name: acPMCPConnectionLifetimeMin

Lifetime in secondsMax

HIST Counter Indicates the Connection lifetime, in seconds.Mib name: acPMCPConnectionLifetimeMax

MGC responsecounters

HIST Counter Indicates the MGC response counters.Mib name: acPMCPCommandCounterValRx

MGC commandcounters

HIST Counter Indicates the MGC command counters.Mib name: acPMCPCommandCounterValTx


HIST Counter Counts the number of incoming retransmissions.Mib name: acPMCPRetransmissionCountValRx


HIST Counter Counts the number of transactions retransmissionssent from the board.Mib name: acPMCPRetransmissionCountValTx

Call Attempts Per SecAverage

HIST Counter Average of call attempts (successful andunsuccessful) per second, during last interval.Mib name: acPMCPCallAttemptsPerSecAverage

Call Attempts Per SecMax

HIST Counter Maximum of call attempts (successful andunsuccessful) per second, during last interval.Mib name: acPMCPCallAttemptsPerSecMax

Call Attempts Per SecMin

HIST Counter Minimum of call attempts (successful andunsuccessful) per second, during last interval.Mib name: acPMCPCallAttemptsPerSecMin

7/23/2019 LTRT-32105 Mediant 3000





Frame: Gateway System Monitoring (History), Tab: MEGACO Control

EMS ParameterName

RT /Hist

Gauge /Counter



Avg

HIST Gauge Indicates the Average number of H.248 active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountAverageMegaco


Min

HIST Gauge Indicates the Minimum number of H.248 active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMinMegaco

[H.248] Num ofActive ContextsMax

HIST Gauge Indicates the Maximum number of H.248 active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMaxMegaco



HIST Counter Counts the Disconnected service change commands sent(excluding retransmission) to the current MGC, during lastinterval.Mib name: acPMMegacoServiceChangeCountValdisconnected


Command -Restart

HIST Counter Counts the Restart service change commands (excludingretransmission) sent to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValrestart


Command -Forced

HIST Counter Counts the Forced service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValforced


Command -Graceful

HIST Counter Counts the Graceful service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValgraceful


Command -

FailOver

HIST Counter Counts the number of times the TPM performed failoverprocedures and attempted contact with another controller,during the last interval.

Mib name: acPMMegacoServiceChangeCountValfailOver[H.248] Service

ChangeCommand -

Handoff

HIST Counter Counts the number of times the TPM performed Handoffprocedures and attempted contact with another controller duringthe last interval.Mib name: acPMMegacoServiceChangeCountValhandoff

Success [H.248]Add

HIST Counter Counts the number of successful Add commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValAdd

Success [H.248]Move

HIST Counter Counts the number of successful Move commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValMove

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

EMS ParameterName

RT /Hist

Gauge /Counter



HIST Counter Counts the number of successful Modify commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValModify


HIST Counter Counts the number of successful Subtract commands, duringthe last interval.Mib name: acPMCPCmdSuccessCountValSubtract


HIST Counter Counts the number of successful Service Change commands,during the last interval.Mib name: acPMCPCmdSuccessCountValSc


HIST Counter Counts the number of successful Audit Value commands,during the last interval.Mib name: acPMCPCmdSuccessCountValAuditValue

Success [H.248]

Audit-Capabilities

HIST Counter Counts the number of successful Audit Capabilities commands,

during the last interval.Mib name: acPMCPCmdSuccessCountValAuditCap


HIST Counter Counts the number of successful Notify commands, during thelast interval.Mib name: acPMCPCmdSuccessCountValNotify

Failed [H.248]Add

HIST Counter Counts the number of Add commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValAdd

Failed [H.248]Move

HIST Counter Counts the number of Move commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValMove


HIST Counter Counts the number of Modify commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValModify

Failed [H.248]Subtract

HIST Counter Counts the number of Subtract commands failure, during thelast interval.Mib name: acPMCPCmdFailureCountValSubtract


HIST Counter Counts the number of Service Change commands failure,during the last interval.Mib name: acPMCPCmdFailureCountValSc


HIST Counter Counts the number of Audit Value commands failure, during thelast interval.

Mib name: acPMCPCmdFailureCountValAuditValue

Failed [H.248]Audit-

Capabilities

HIST Counter Counts the number of Audit Capabilities commands failure,during the last interval.Mib name: acPMCPCmdFailureCountValAuditCap


HIST Counter Counts the number of Notify commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountValNotify

7/23/2019 LTRT-32105 Mediant 3000





Frame: Gateway System Monitoring (History), Tab: MGCP Control

EMS ParameterName

RT /Hist

Gauge /Counter



Avg

HIST Gauge Indicates the Average number of MGCP active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountAverageMgcp


Min

HIST Gauge Indicates the Minimum number of MGCP active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMinMgcp


Max

HIST Gauge Indicates the Maximum number of MGCP active contextsincorporating at least 1 Termination, per TPM, during the lastinterval.Mib name: acPMActiveContextCountMaxMgcp


Disconnected

HIST Counter Counts the Disconnected service change commands sent(excluding retransmission) to the current MGC, during the lastinterval.Mib name: acPMMGCPRsipReasonCountValDisconnected


Restart

HIST Counter Counts the Restart service change commands (excludingretransmission) sent to the current MGC, during the lastinterval.Mib name: acPMMGCPRsipReasonCountValRestart


Forced

HIST Counter Counts the Forced service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMGCPRsipReasonCountValForced


Graceful

HIST Counter Counts the Graceful service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMGCPRsipReasonCountValGraceful



HIST Counter Counts the number of successful Endpoint Conf commands,during the last interval.Mib name: acPMMGCPCommandSuccessCountValAdd

Success

[MGCP] CreateConnectionCommand

HIST Counter Counts the number of successful Create Connection

commands, during the last interval.Mib name: acPMMGCPCommandSuccessCountValMove


ConnectionCommand

HIST Counter Counts the number of successful Modify commands, during thelast interval.Mib name: acPMMGCPCommandSuccessCountValModify

Success[MGCP] Delete

ConnectionCommand

HIST Counter Counts the number of successful Delete Connectioncommands, during the last interval.Mib name: acPMMGCPCommandSuccessCountValSubtract

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

EMS ParameterName

RT /Hist

Gauge /Counter


Success[MGCP]

Notification

RequestCommand

HIST Counter Counts the number of successful Notification Requestcommands, during the last interval.Mib name: acPMMGCPCommandSuccessCountValSc


Command

HIST Counter Counts the number of successful Notify commands, during thelast interval.Mib name: acPMMGCPCommandSuccessCountValAuditValue


EndpointCommand

HIST Counter Counts the number of successful Audit Endpoint commands,during the last interval.Mib name: acPMMGCPCommandSuccessCountValAuditCap

Success[MGCP] Audit

ConnectionCommand

HIST Counter Counts the number of successful Audit Connection commands,during the last interval.

Mib name: acPMMGCPCommandSuccessCountValNotify



HIST Counter Counts the number of Endpoint Conf commands failure, duringthe last interval.Mib name: acPMMGCPCommandFailureCountValAdd

Failed [MGCP]Create

ConnectionCommand

HIST Counter Counts the number of Create Connection commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValMove

Failed [MGCP]

ModifyConnectionCommand

HIST Counter Counts the number of Modify commands failure, during the last

interval.Mib name: acPMMGCPCommandFailureCountValModify

Failed [MGCP]Delete

ConnectionCommand

HIST Counter Counts the number of Delete Connection commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValSubtract


RequestCommand

HIST Counter Counts the number of Notification Request commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValSc

Failed [MGCP]Notify Command HIST Counter Counts the number of Notify commands failure, during the lastinterval.Mib name: acPMMGCPCommandFailureCountValAuditValue


Command

HIST Counter Counts the number of Audit Endpoint commands failure, duringthe last interval.Mib name: acPMMGCPCommandFailureCountValAuditCap

Failed [MGCP]Audit-

ConnectionCommand

HIST Counter Counts the number of Audit Connection commands failure,during the last interval.Mib name: acPMMGCPCommandFailureCountValNotify

7/23/2019 LTRT-32105 Mediant 3000





Frame: Gateway System Moni toring (History), Tab: SIP IP to Tel


Gauge /Counter



HIST Counter Indicates the number of attempted calls for IP to Teldirection, during last interval.Mib name: acPMSIPAttemptedCallsValIP2Tel


HIST Counter Indicates the number of established calls for IP to Teldirection, during last interval.Mib name: acPMSIPEstablishedCallsValIP2Tel


to a Busy Line

HIST Counter Indicates the number of calls that failed as a result ofa busy line for IP to Tel direction, during last interval.Mib name: acPMSIPBusyCallsValIP2Tel


to No Answer

HIST Counter Indicates the number of calls that weren't answeredfor IP to Tel direction, during last interval.Mib name: acPMSIPNoAnswerCallsValIP2Tel


to Forward

HIST Counter Indicates the number of calls that were terminateddue to a call forward for IP to Tel direction, during lastinterval.Mib name: acPMSIPForwardedCallsValIP2Tel


Route

HIST Counter Indicates the number of calls whose destinationsweren't found for IP to Tel direction, during lastinterval.Mib name: acPMSIPNoRouteCallsValIP2Tel


HIST Counter Indicates the number of calls that failed due tomismatched media server capabilities for IP to Teldirection, during last interval.Mib name: acPMSIPNoMatchCallsValIP2Tel


Resources

HIST Counter Indicates the number of calls that failed due tounavailable resources or a media server lock for IP toTel direction, during last interval.Mib name: acPMSIPNoResourcesCallsValIP2Tel


Other reasons

HIST Counter This counter is incremented as a result of calls thatfail due to reasons not covered by the other countersfor IP to Tel direction, during last interval.Mib name: acPMSIPFailCallsValIP2Tel


HIST Gauge Indicates the average call duration of establishedcalls for IP to Tel direction, during last interval.Mib name: acPMSIPCallDurationAverageIP2Tel

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000


Frame: Gateway System Moni tor ing (History), Tab: SIP Tel to IP


Gauge /Counter



HIST Counter Indicates the number of attempted calls for Tel to IPdirection, during last interval.Mib name: acPMSIPAttemptedCallsValTel2IP


HIST Counter Indicates the number of established calls for Tel to IPdirection, during last interval.Mib name: acPMSIPEstablishedCallsValTel2IP


to a Busy Line

HIST Counter Indicates the number of calls that failed as a result ofa busy line for Tel to IP direction, during last interval.

Mib name: acPMSIPBusyCallsValTel2IPTel to IP Number of

Calls Terminated dueto No Answer

HIST Counter Indicates the number of calls that weren't answeredfor Tel to IP direction, during last interval.Mib name: acPMSIPNoAnswerCallsValTel2IP


to Forward

HIST Counter Indicates the number of calls that were terminateddue to a call forward for Tel to IP direction, during lastinterval.Mib name: acPMSIPForwardedCallsValTel2IP


Route

HIST Counter Indicates the number of calls whose destinationsweren't found for Tel to IP direction, during lastinterval.

Mib name: acPMSIPNoRouteCallsValTel2IPTel to IP Number of

Failed Calls due to NoMatched Capabilities

HIST Counter Indicates the number of calls that failed due tomismatched media server capabilities for Tel to IPdirection, during last interval.Mib name: acPMSIPNoMatchCallsValTel2IP


Resources

HIST Counter Indicates the number of calls that failed due tounavailable resources or a media server lock for Telto IP direction, during last interval.Mib name: acPMSIPNoResourcesCallsValTel2IP


Other reasons

HIST Counter This counter is incremented as a result of calls thatfail due to reasons not covered by the other countersfor Tel to IP direction, during last interval.Mib name: acPMSIPFailCallsValTel2IP


HIST Gauge Indicates the average call duration of establishedcalls for Tel to IP direction, during last interval.Mib name: acPMSIPCallDurationAverageTel2IP

7/23/2019 LTRT-32105 Mediant 3000




3.6 Frame: Gateway System Monitoring (Real-Time)


Frame: Gateway System Monitoring (Real-Time), Tab: System IP


Gauge /Counter



RT Gauge This attribute counts the Current total number ofoutgoing Kbytes (1000 bytes) from the interface, sofar from the beginning of the current collection intervalas indicated by time Interval.Mib name: acPMNetUtilKBytesTotalTx


RT Gauge This attribute counts the total number of Kbytes (1000bytes) received on the interface, including thosereceived in error, so far from the beginning of thecurrent collection interval as indicated by timeInterval.Mib name: acPMNetUtilKBytesTotalRx


RT Gauge This attribute counts the Current total number ofoutgoing Packets from the interface, so far from thebeginning of the current collection interval asindicated by time Interval.Mib name: acPMNetUtilPacketsTotalTx


RT Gauge This attribute counts the Current total number ofPackets received on the interface, including those

received in error, so far from the beginning of thecurrent collection interval as indicated by timeInterval.Mib name: acPMNetUtilPacketsTotalRx


RT Gauge This attribute counts the Current total number ofmalformed IP Packets received on the interface fromthe beginning of the current collection interval. Theseare packets which are corrupted or discarded due toerrors in their IP headers, including bad checksums,version number mismatch, other format errors, time-to-live exceeded, errors discovered in processingtheir IP options, etc.Mib name: acPMNetUtilDiscardedPacketsTotal

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000


Frame: Gateway System Moni tor ing (Real-Time), Tab: VoP Call Statist ics


Gauge /Counter


Num of Active Contexts RT Gauge Indicates the current number of voice calls connectedon the box since last clear.Mib name: acPMActiveContextCountVal

G711 Active Calls RT Gauge This attribute indicates the current number of G711calls present on the TPM.Mib name: acPMChannelsPerCoderValG711

G723 Active Calls RT Gauge This attribute indicates the current number of G723calls present on the TPM.This attribute is only

displayed if the G723 Codec is provisioned on theDSP template.Mib name: acPMChannelsPerCoderValG723

G728 Active Calls RT Gauge This attribute indicates the current number of G728calls present on the TPM.This attribute is onlydisplayed if the G728 Codec is provisioned on theDSP template.Mib name: acPMChannelsPerCoderValG728

G729a Active Calls RT Gauge This attribute indicates the current number of G729acalls present on the TPM.This attribute is onlydisplayed if the G729a Codec is provisioned on theDSP.

Mib name: acPMChannelsPerCoderValG729a

G729e Active Calls RT Gauge This attribute indicates the current number of G729ecalls present on the TPM.This attribute is onlydisplayed if the G729e Codec is provisioned on theDSP template.Mib name: acPMChannelsPerCoderValG729e

AMR Active Calls RT Gauge This attribute indicates the current number of AMRcalls present on the TPM.This attribute is onlydisplayed if the AMR Codec is provisioned on theDSP template.Mib name: acPMChannelsPerCoderValAMR

EVRC Active Calls RT Gauge This attribute indicates the current number of EVRCcalls present on the TPM.This attribute is onlydisplayed if the EVRC Codec is provisioned on theDSP template.Mib name: acPMChannelsPerCoderValEVRC

Rx Packet Loss current RT Gauge The total number of RTP packet loss reported byRTCP since last reset.Mib name: acPMModuleRTPPacketLossRxTotal

Tx Packets Losscurrent

RT Gauge The total number of RTP packet loss reported byRTCP since last reset.Mib name: acPMModuleRTPPacketLossTxTotal

Rx Packets Current RT Gauge The total number of packets recieved since last reset.Mib name: acPMModuleRTPPacketsRxTotal

7/23/2019 LTRT-32105 Mediant 3000





Gauge /Counter


Rx Packets Current RT Gauge The total number of RTP packets transmited sincelast reset.Mib name: acPMModuleRTPPacketsTxTotal


Frame: Gateway System Moni tori ng (Real-Time), Tab: Common Control


Gauge /Counter


Lifetime in seconds RT Counter The Connection lifetime in seconds.Mib name: acPMCPConnectionLifetimeVolume

MGC Tx commandcounters

RT Gauge MGC command counters.Mib name: acPMCPCommandCounterTotalTx

MGC Rx commandcounters

RT Gauge MGC response counters.Mib name: acPMCPCommandCounterTotalRx


RT Gauge Number of transactions retransmissions sent from theboard.Mib name: acPMCPRetransmissionCountTotalTx


RT Gauge Number of incoming retransmissions.Mib name: acPMCPRetransmissionCountTotalRx

Call Attempts Per Sec RT Gauge Number of Call attempts (successful andunsuccessful) per second, during current interval.Mib name: acPMCPCallAttemptsPerSecVal


Frame: Gateway System Monitoring (Real-Time), Tab: MEGACO Control

EMS ParameterName

RT /Hist

Gauge /Counter


[H.248] Num of

Active Contexts

RT Gauge This attribute indicates the Current number of H.248 active

contexts incorporating at least 1 Termination, per TPM.Mib name: acPMActiveContextCountValMegaco



RT Counter Counts the Disconnected service change commands sent(excluding retransmission) to the current MGC, during lastinterval.Mib name: acPMMegacoServiceChangeCountValdisconnected


Command -Restart

RT Counter Counts the Restart service change commands (excludingretransmission) sent to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValrestart

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

EMS ParameterName

RT /Hist

Gauge /Counter



Command -

Forced

RT Counter Counts the Forced service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValforced


Command -Graceful

RT Counter Counts the Graceful service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMegacoServiceChangeCountValgraceful


Command -FailOver

RT Counter Counts the number of times the TPM performed failoverprocedures and attempted contact with another controller,during the last interval.Mib name: acPMMegacoServiceChangeCountValfailOver


Command -Handoff

RT Counter Counts the number of times the TPM performed Handoffprocedures and attempted contact with another controller during

the last interval.Mib name: acPMMegacoServiceChangeCountValhandoff

Success [H.248]Add

RT Counter Counts the number of successful Add commands, during thelast interval.Mib name: acPMCPCmdSuccessCountTotalAdd

Success [H.248]Move

RT Counter Counts the number of successful Move commands, during thelast interval.Mib name: acPMCPCmdSuccessCountTotalMove


RT Counter Counts the number of successful Modify commands, during thelast interval.Mib name: acPMCPCmdSuccessCountTotalModify


RT Counter Counts the number of successful Subtract commands, duringthe last interval.Mib name: acPMCPCmdSuccessCountTotalSubtract


RT Counter Counts the number of successful Service Change commands,during the last interval.Mib name: acPMCPCmdSuccessCountTotalSc


RT Counter Counts the number of successful Audit Value commands,during the last interval.Mib name: acPMCPCmdSuccessCountTotalAuditValue

Success [H.248]Audit-

Capabilities

RT Counter Counts the number of successful Audit Capabilities commands,during the last interval.Mib name: acPMCPCmdSuccessCountTotalAuditCap


RT Counter Counts the number of successful Notify commands, during thelast interval.Mib name: acPMCPCmdSuccessCountTotalNotify

Failed [H.248]Add

RT Counter Counts the number of Add commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountTotalAdd

Failed [H.248]Move

RT Counter Counts the number of Move commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountTotalMove

7/23/2019 LTRT-32105 Mediant 3000




EMS ParameterName

RT /Hist

Gauge /Counter



RT Counter Counts the number of successful Modify commands, during thelast interval.Mib name: acPMCPCmdFailureCountTotalModify

Failed [H.248]Subtractv

RT Counter Counts the number of successful Subtract commands, duringthe last interval.Mib name: acPMCPCmdFailureCountTotalSubtract


RT Counter Counts the number of Service Change commands failure,during the last interval.Mib name: acPMCPCmdFailureCountTotalSc


RT Counter Counts the number of Audit Value commands failure, during thelast interval.Mib name: acPMCPCmdFailureCountTotalAuditValue

Failed [H.248]

Audit-Capabilities

RT Counter Counts the number of Audit Capabilities commands failure,

during the last interval.Mib name: acPMCPCmdFailureCountTotalAuditCap


RT Counter Counts the number of Notify commands failure, during the lastinterval.Mib name: acPMCPCmdFailureCountTotalNotify


Frame: Gateway System Monitoring (Real-Time), Tab: MGCP Control

EMS ParameterName RT /Hist Gauge /Counter Parameter Description

[Mgcp] Num ofActive Contexts

RT Gauge This attribute indicates the Current number of MGCP activecontexts incorporating at least 1 Termination, per TPM.Mib name: acPMActiveContextCountValMgcp


Disconnected

RT Counter Counts the Disconnected service change commands sent(excluding retransmission) to the current MGC, during the lastinterval.Mib name: acPMMGCPRsipReasonCountValDisconnected


Restart

RT Counter Counts the Restart service change commands (excludingretransmission) sent to the current MGC, during the last interval.

Mib name: acPMMGCPRsipReasonCountValRestart[MGCP] RSIPCommand -

Forced

RT Counter Counts the Forced service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMGCPRsipReasonCountValForced


Graceful

RT Counter Counts the Graceful service change commands sent (excludingretransmission) to the current MGC, during the last interval.Mib name: acPMMGCPRsipReasonCountValGraceful


Cancel Graceful

RT Counter Counts the Cancel Graceful restart in progress commands sent(excluding retransmission) to the current MGC during the currentinterval.Mib name: acPMMGCPRsipReasonCountValCancelGraceful

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

EMS ParameterName

RT /Hist

Gauge /Counter




RT Counter This attribute counts the number of successful Endpoint Confcommands, from the beginning of the current collection interval.Mib name: acPMMGCPCommandSuccessCountTotalAdd

Success[MGCP] Create

ConnectionCommand

RT Counter This attribute counts the number of successful CreateConnection commands, from the beginning of the currentcollection interval.Mib name: acPMMGCPCommandSuccessCountTotalMove


ConnectionCommand

RT Counter This attribute counts the number of successful Modifycommands, from the beginning of the current collection interval.Mib name: acPMMGCPCommandSuccessCountTotalModify

Success

[MGCP] DeleteConnectionCommand

RT Counter This attribute counts the number of successful Delete

Connection commands, from the beginning of the currentcollection interval.Mib name: acPMMGCPCommandSuccessCountTotalSubtract

Success[MGCP]

NotificationRequest

Command

RT Counter This attribute counts the number of Notification Requestsuccessful commands, from the beginning of the currentcollection interval.Mib name: acPMMGCPCommandSuccessCountTotalSc


Command

RT Counter This attribute counts the number of successful Notify commands,from the beginning of the current collection interval.Mib name: acPMMGCPCommandSuccessCountTotalAuditValue


EndpointCommand

RT Counter This attribute counts the number of successful Audit Endpointcommands, from the beginning of the current collection interval.Mib name: acPMMGCPCommandSuccessCountTotalAuditCap

Success[MGCP] AuditConnectionCommand

RT Counter This attribute counts the number of successful Audit Connectioncommands, from the beginning of the current collection interval.Mib name: acPMMGCPCommandSuccessCountTotalNotify



RT Counter This attribute counts the number of Endpoint Conf commandsfailure, from the beginning of the current collection interval.Mib name: acPMMGCPCommandFailureCountTotalAdd

Failed [MGCP]Create

ConnectionCommand

RT Counter This attribute counts the number of Create Connectioncommands failure, from the beginning of the current collectioninterval.Mib name: acPMMGCPCommandFailureCountTotalMove

Failed [MGCP]Modify

ConnectionCommand

RT Counter This attribute counts the number of Modify commands failure,from the beginning of the current collection interval.Mib name: acPMMGCPCommandFailureCountTotalModify

Failed [MGCP]Delete

Connection

Command

RT Counter This attribute counts the number of Delete Connectioncommands failure, from the beginning of the current collectioninterval.

Mib name: acPMMGCPCommandFailureCountTotalSubtract

7/23/2019 LTRT-32105 Mediant 3000




EMS ParameterName

RT /Hist

Gauge /Counter



Request

Command

RT Counter This attribute counts the number of Notification Requestcommands failure, from the beginning of the current collectioninterval.

Mib name: acPMMGCPCommandFailureCountTotalSc

Failed [MGCP]Notify

Command

RT Counter This attribute counts the number of Notify commands failure,from the beginning of the current collection interval.Mib name: acPMMGCPCommandFailureCountTotalAuditValue


Command

RT Counter This attribute counts the number of Audit Endpoint commandsfailure, from the beginning of the current collection interval.Mib name: acPMMGCPCommandFailureCountTotalAuditCap

Failed [MGCP]Audit-

ConnectionCommand

RT Counter This attribute counts the number of Audit Connection commandsfailure, from the beginning of the current collection interval.Mib name: acPMMGCPCommandFailureCountTotalNotify


Frame: Gateway System Monitoring (Real-Time), Tab: SIP IP to Tel


Gauge /Counter



RT Counter Indicates the number of attempted calls for IP to Teldirection, during last interval.Mib name: acPMSIPAttemptedCallsValIP2Tel


RT Counter Indicates the number of established calls for IP to Teldirection, during last interval.Mib name: acPMSIPEstablishedCallsValIP2Tel


to a Busy Line

RT Counter Indicates the number of calls that failed as a result ofa busy line for IP to Tel direction, during last interval.Mib name: acPMSIPBusyCallsValIP2Tel


to No Answer

RT Counter Indicates the number of calls that weren't answeredfor IP to Tel direction, during last interval.Mib name: acPMSIPNoAnswerCallsValIP2Tel

IP to Tel Number of

Calls Terminated dueto Forward

RT Counter Indicates the number of calls that were terminated

due to a call forward for IP to Tel direction, during lastinterval.Mib name: acPMSIPForwardedCallsValIP2Tel


Route

RT Counter Indicates the number of calls whose destinationsweren't found for IP to Tel direction, during lastinterval.Mib name: acPMSIPNoRouteCallsValIP2Tel


RT Counter Indicates the number of calls that failed due tomismatched media server capabilities for IP to Teldirection, during last interval.Mib name: acPMSIPNoMatchCallsValIP2Tel

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000


Gauge /Counter



Resources

RT Counter Indicates the number of calls that failed due tounavailable resources or a media server lock for IP toTel direction, during last interval.

Mib name: acPMSIPNoResourcesCallsValIP2Tel


Other reasons

RT Counter This counter is incremented as a result of calls thatfail due to reasons not covered by the other countersfor IP to Tel direction, during last interval.Mib name: acPMSIPFailCallsValIP2Tel


RT Gauge Indicates the average call duration of establishedcalls for IP to Tel direction, during last interval.Mib name: acPMSIPCallDurationAverageIP2Tel


Frame: Gateway System Monitoring (Real-Time), Tab: SIP Tel to IP


Gauge /Counter



RT Counter Indicates the number of attempted calls for Tel to IPdirection, during last interval.Mib name: acPMSIPAttemptedCallsValTel2IP


RT Counter Indicates the number of established calls for Tel to IPdirection, during last interval.Mib name: acPMSIPEstablishedCallsValTel2IP


to a Busy Line

RT Counter Indicates the number of calls that failed as a result ofa busy line for Tel to IP direction, during last interval.Mib name: acPMSIPBusyCallsValTel2IP


to No Answer

RT Counter Indicates the number of calls that weren't answeredfor Tel to IP direction, during last interval.Mib name: acPMSIPNoAnswerCallsValTel2IP


to Forward

RT Counter Indicates the number of calls that were terminateddue to a call forward for Tel to IP direction, during lastinterval.Mib name: acPMSIPForwardedCallsValTel2IP

Tel to IP Number ofFailed Calls due to NoRoute

RT Counter Indicates the number of calls whose destinationsweren't found for Tel to IP direction, during lastinterval.Mib name: acPMSIPNoRouteCallsValTel2IP

Tel to IP Number ofFailed Calls due to NoMatched Capabilities

RT Counter Indicates the number of calls that failed due tomismatched media server capabilities for Tel to IPdirection, during last interval.Mib name: acPMSIPNoMatchCallsValTel2IP


Resources

RT Counter Indicates the number of calls that failed due tounavailable resources or a media server lock for Telto IP direction, during last interval.Mib name: acPMSIPNoResourcesCallsValTel2IP

7/23/2019 LTRT-32105 Mediant 3000





Gauge /Counter



Other reasons

RT Counter This counter is incremented as a result of calls thatfail due to reasons not covered by the other countersfor Tel to IP direction, during last interval.

Mib name: acPMSIPFailCallsValTel2IP


RT Gauge Indicates the average call duration of establishedcalls for Tel to IP direction, during last interval.Mib name: acPMSIPCallDurationAverageTel2IP

3.7 Frame: SS7 Link Monitoring (History)

3.7.1 Tab: SS7 Link Statistics

Frame: SS7 Link Monitoring (History), Tab: SS7 Link Statistics

EMS ParameterName

RT /Hist

Gauge /Counter


SS7 LinkTransmitted

LSSU's

HIST Counter Value of gauge or counter.Mib name: acPMSS7TxLSSUVal

SS7 LinkReceived LSSU's

HIST Counter Value of gauge or counter.Mib name: acPMSS7RxLSSUVal

SS7 Link

TransmittedFISU's

HIST Counter Value of gauge or counter.

Mib name: acPMSS7TxFISUVal

SS7 LinkReceived FISU's

HIST Counter Value of gauge or counter.Mib name: acPMSS7RxFISUVal

SS7 LinkDiscarded MSU's

HIST Counter Value of gauge or counter.Mib name: acPMSS7DiscMSUVal

SS7 Link InService %

HIST Counter Percent of interval time for which gauge is above what wasdetermined as the high threshold. In this case - 'In Service'.Mib name: acPMSS7InServiceTimeAboveHighThreshold

SS7 Link Out OfService %

HIST Counter Percent of interval time for which gauge is above what wasdetermined as the high threshold. In this case - 'Out OfService'.Mib name: acPMSS7OutOfServiceTimeAboveHighThreshold

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

3.8 Frame: SS7 Link Monitoring (Real-Time)

3.8.1 Tab: SS7 Link Statistics

Frame: SS7 Link Moni toring (Real-Time), Tab: SS7 Link Statisti cs


Gauge /Counter


SS7 Link TransmittedLSSU's

RT Counter Total since last reset.Mib name: acPMSS7TxLSSUTotal

SS7 Link ReceivedLSSU's

RT Counter Total since last reset.Mib name: acPMSS7RxLSSUTotal

SS7 Link TransmittedFISU's

RT Counter Total since last reset.Mib name: acPMSS7TxFISUTotal

SS7 Link ReceivedFISU's

RT Counter Total since last reset.Mib name: acPMSS7RxFISUTotal

SS7 Link TransmittedOctets

RT Counter Total since last reset.Mib name: acPMSS7TxOctetsTotal

SS7 Link ReceivedOctets

RT Counter Total since last reset.Mib name: acPMSS7RxOctetsTotal

SS7 Link MTP2 No AckReceived

RT Counter Total since last reset.Mib name: acPMSS7MTP2NoAckRxTotal

SS7 Link DiscardedMSU's

RT Counter Total since last reset.Mib name: acPMSS7DiscMSUTotal

3.9 Frame: SS7 Linkset Monitoring (History)

3.9.1 Tab: SS7 Linkset Statistics

Frame: SS7 Linkset Monitoring (History), Tab: SS7 Linkset Statistics

EMSParameter

Name

RT /Hist

Gauge /Counter






7/23/2019 LTRT-32105 Mediant 3000




3.10 Frame: SS7 Node Monitoring (Real-Time)

3.10.1 Tab: SS7 Node Statistics

Frame: SS7 Node Monitoring (Real-Time), Tab: SS7 Node Statisti cs


Gauge /Counter


SS7 Node TransmittedMTP3 MSU's

RT Counter Total since last reset.Mib name: acPMSS7TxMTP3MSUTotal

SS7 Node ReceivedMTP3 MSU's

RT Counter Total since last reset.Mib name: acPMSS7RxMTP3MSUTotal

SS7 Node DiscardedMTP3 MSU's

RT Counter Total since last reset.Mib name: acPMSS7MTP3MSUDiscardedTotal

3.11 Frame: Trunk Monitoring (History)

3.11.1 Tab: Trunk Performance

Frame: Trunk Monitoring (History), Tab: Trunk Performance


Gauge /Counter


Trunk utilization Avg HIST Gauge Indicates the Average of simultaneously busy DS0channels on this Trunk up to this point in time duringthe collection interval, as indicated by the TimeInterval. A busy channel is when the Physical DS0Termination isn't in Null context or OOS. A Trunk iseither E1 or T1.Mib name: acPMTrunkUtilizationAverage

Trunk utilization Min HIST Gauge Indicates the Minimum of simultaneously busy DS0channels on this Trunk up to this point in time duringthe collection interval, as indicated by the TimeInterval. A busy channel is when the Physical DS0

Termination isn't in Null context or OOS. A Trunk iseither E1 or T1.Mib name: acPMTrunkUtilizationMin

Trunk utilization Max HIST Gauge Indicates the Maximum of simultaneously busy DS0channels on this Trunk up to this point in time duringthe collection interval, as indicated by the TimeInterval. A busy channel is when the Physical DS0Termination isn't in Null context or OOS. A Trunk iseither E1 or T1.Mib name: acPMTrunkUtilizationMax

Trunk Errored Seconds HIST Gauge Indicates the number of Errored Seconds.Mib name: dsx1IntervalESs

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000


Gauge /Counter



HIST Gauge Indicates the number of Controlled Slip Seconds.Mib name: dsx1IntervalCSSs

Trunk Path CodingViolations HIST Gauge Indicates the number of Path Coding Violations.Mib name: dsx1IntervalPCVs


HIST Gauge Indicates the number of Bursty Errored Seconds.Mib name: dsx1IntervalBESs

3.12 Frame: Trunk Monitoring (Real-Time)

3.12.1 Tab: Trunk Performance

Frame: Trunk Monitoring (Real-Time), Tab: Trunk Performance


Gauge /Counter


Trunk utilization RT Gauge This attribute indicates the Current simultaneous busyDS0 channels on this Trunk. A busy channel is whenthe Physical DS0 Termination isn't in Null context orOOS. A Trunk is either E1 or T1.Mib name: acPMTrunkUtilizationVal

Trunk Calls Duration RT Gauge This attribute amount of call duration per timeslot andE1 since last clear.

Mib name: acPMPSTNTrunkActivitySecondsTotalTrunk Errored Seconds RT Gauge This attribute indicates amount of Errored Seconds

encountered by a DS1 interface in the previous 24hour interval. Invalid 15 minute intervals count as 0.Mib name: dsx1TotalESs


RT Gauge This attribute indicates amount of Controlled SlipSeconds encountered by a DS1 interface in theprevious 24 hour interval. Invalid 15 minute intervalscount as 0.Mib name: dsx1TotalCSSs

Trunk Path Coding

Violations

RT Gauge This attribute indicates amount of Path Coding

Violations encountered by a DS1 interface in theprevious 24 hour interval. Invalid 15 minute intervalscount as 0.Mib name: dsx1TotalPCVs


RT Gauge This attribute indicates amount of Bursty ErroredSeconds encountered by a DS1 interface in theprevious 24 hour interval. Invalid 15 minute intervalscount as 0.Mib name: dsx1TotalBESs

7/23/2019 LTRT-32105 Mediant 3000



OAM Guide 4. Mediant 3000 Alarm Guide

4 Mediant 3000 Alarm Guide

System alarms, associated with the Mediant Media Gateways, can be displayed,viewed, tracked and troubleshooted in the EMS's Alarm Browser.

Supported alarms / events fall into one of three categories:

1. Standard traps: traps originated by the media gateway - all the standard traps aretreated are events.

2. Proprietary alarms / events: traps originated by the media gateway and defined inthe gateway's proprietary MIB.

3. EMS alarms / events: traps originated by the EMS application and defined in theEMS proprietary MIB. To determine which traps are defined as Events, refer to'Alarm Name' or 'Alarm Title' fields in the table. All the events are marked with[Event] prefix. This is how events are marked in the EMS Alarms Browser and

Alarms History windows.

Each alarm / event described in this section includes the following information:

Table -: Information Included in Each Alarm

Description Textual description of specific problem.

SNMP Alarm NOTIFICATION-TYPE Name as it appears in the MIB.

SNMP OID NOTIFICATION-TYPE OID as it appears in the MIB.

Alarm Tit le The alarm name, as it appears in the EMS Alarm Browser.

Alarm Type Alarm type according to ITU X.733 definition. This value is displayedfrom the variable-binding acBoardTrapGlobalsType.

Alarm Source Possible values of sources if applicable to a specific alarm. This value isdisplayed from the variable-binding acBoardTrapGlobalsSource.

Probable Cause Alarm probable cause according to ITU X.733 definition. This value isdisplayed from the variable-binding acBoardTrapGlobalsProbableCause.

Severity Possible values of severities. This value is displayed from the variable-binding acBoardTrapGlobalsSeverity.

Addi tional Info1,2,3 Additional information fields provided by MG application, depending onthe specific scenario. These values are displayed fromacBoardTrapGlobalsAdditionalInfo1, acBoardTrapGlobalsAdditionalInfo2

and acBoardTrapGlobalsAdditionalInfo3. The document includes a fewexamples of the possible values of this field.

Corrective Action Possible corrective action when applicable.

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.1 Standard Traps

4.1.1 Cold Start

Cold Start

Description SNMPv2-MIB: A coldStart trap signifies that the SNMP entity, supportinga notification originator application, is reinitializing itself and that itsconfiguration may have been altered.

SNMP Alarm coldStart

SNMP OID 1.3.6.1.6.3.1.1.5.1

Alarm Tit le [Event] Cold Start

Alarm Type Communication Alarm

Alarm Source

Probable Cause Other

Severity Clear

Addi tional Info1,2,3

Corrective Action

7/23/2019 LTRT-32105 Mediant 3000




4.1.2 Link Down

Supported for Ethernet and DS1 links. In the Mediant 3000, it is also supported forDS3, SONET and SDH links.

Link Down

Description SNMPv2-MIB: A linkDown trap signifies that the SNMP entity, acting inan agent role, has detected that the ifOperStatus object for one of itscommunication links is about to enter the down state from some otherstate (but not from the notPresent state). This other state is indicated bythe included value of ifOperStatus.

SNMP Alarm [Event] linkDown

SNMP OID 1.3.6.1.6.3.1.1.5.3

Alarm Tit le Link Down


Alarm Source


Severity Major


Corrective Action

4.1.3 Link Up

Supported for Ethernet and DS1 links. In the Mediant 3000, it is also supported forDS3, SONET and SDH links.

Link Up

Description SNMPv2-MIB: A linkUp trap signifies that the SNMP entity, acting in anagent role, has detected that the ifOperStatus object for one of itscommunication links left the down state and transitioned into some otherstate (but not into the notPresent state). This other state is indicated bythe included value of ifOperStatus.

SNMP Alarm [Event] linkUp

SNMP OID 1.3.6.1.6.3.1.1.5.4

Alarm Tit le Link Up


Alarm Source


Severity Clear


Corrective Action

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.1.4 Entity Configuration Change

Entity Configuration Change

Description Entity-MIB: An entConfigChange notification is generated when the valueof entLastChangeTime changes.

SNMP Alarm [Event] entConfigChange

SNMP OID 1.3.6.1.2.1.47.2.0.1

Alarm Tit le Entity Configuration Change

Alarm Type Equipment Alarm

Alarm Source

Probable Cause OtherSeverity Info


Corrective Action

4.1.5 Authentication Failure

Authentication Failure

Description SNMPv2-MIB: An authenticationFailure trap signifies that the SNMPentity has received a protocol message that is no properly authenticated.While all implementations of SNMP entities MAY be capable ofgenerating this trap, the snmpEnableAuthenTraps object indicateswhether this trap will be generated.

SNMP Alarm [Event] authenticationFailure

SNMP OID 1.3.6.1.6.3.1.1.5.5

Alarm Tit le Authentication Failure


Alarm Source


Severity Major


Corrective Action

7/23/2019 LTRT-32105 Mediant 3000




4.1.6 DS1 Line Status

DS1 Line Status

Description From RFC 3895 (Definitions of Managed Objects for the DS1, E1, DS2,and E2 Interface Types. O. Nicklass, Ed.. September 2004): Adsx1LineStatusChange trap is sent when the value of an instancedsx1LineStatus changes. It can be utilized by an NMS to trigger polls.When the line status change results from a higher level line statuschange (i.e., ds3), then no traps for the ds1 are sent.

SNMP Alarm [Event] dsx1LineStatusChange

SNMP OID 1.3.6.1.2.1.10.18.15.0.1

Alarm Tit le DS1 Line Status


Alarm Source Trunk# (number of trunk)


Severity Major on raise, Clear on clear

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

Addi tional Info1,2,3 Updated DS1 Line Status.

This variable indicates the Line Status of the interface. It containsloopback, failure, received 'alarm' and transmitted 'alarms' information.

The dsx1LineStatus is a bit map represented as a sum, therefore, it canrepresent multiple failures (alarms) and a LoopbackState simultaneously.dsx1NoAlarm must be set if and only if no other flag is set. If thedsx1loopbackState bit is set, the loopback in effect can be determinedfrom the dsx1loopbackConfig object. The various bit positions are:

1 dsx1NoAlarm No alarm present

2 dsx1RcvFarEndLOF Far end LOF (a.k.a., YellowAlarm)

4 dsx1XmtFarEndLOF Near end sending LOFIndication

8 dsx1RcvAIS Far end sending AIS

16 dsx1XmtAIS Near end sending AIS

32 dsx1LossOfFrame Near end LOF (a.k.a., Red Alarm)

64 dsx1LossOfSignal Near end Loss Of Signal

128 dsx1LoopbackState Near end is looped

256 dsx1T16AIS E1 TS16 AIS

512 dsx1RcvFarEndLOMF Far End Sending TS16 LOMF

1024 dsx1XmtFarEndLOMF Near End Sending TS16 LOMF

2048 dsx1RcvTestCode Near End detects a test code4096 dsx1OtherFailure Any line status not defined here

8192 dsx1UnavailSigState Near End in Unavailable Signal State

16384 dsx1NetEquipOOS Carrier Equipment Out ofService

32768 dsx1RcvPayloadAIS DS2 Payload AIS

65536 dsx1Ds2PerfThreshold DS2 Performance Threshold Exceeded

Corrective Action -

7/23/2019 LTRT-32105 Mediant 3000




4.1.7 DS3 Line Status

DS3 Line Status

Description From RFC 3896 (Definitions of Managed Objects for the DS3/E3Interface Type. O.Nicklass, Ed.. September 2004): Adsx3LineStatusChange trap is sent when the value of an instance ofdsx3LineStatus changes. It can be utilized by an NMS to trigger polls.When the line status change results in a lower level line status change(i.e., ds1), then no traps for the lower level are sent.

SNMP Alarm [Event] dsx3LineStatusChange

SNMP OID 1.3.6.1.2.1.10.30.15.0.1

Alarm Tit le DS3 Line Status


Alarm Source Trunk# (number of trunk)



Addi tional Info1,2,3 Updated DS3 Line Status.

This variable indicates the Line Status of the interface. It containsloopback state information and failure state information. Thedsx3LineStatus is a bit map represented as a sum, therefore it canrepresent multiple failures and a loopback (see dsx3LoopbackConfigobject for the type of loopback) simultaneously. The dsx3NoAlarm mustbe set if and only if no other flag is set. If the dsx3loopbackState bit is

set, the loopback in effect can be determined from thedsx3loopbackConfig object.

The various bit positions are:

1 dsx3NoAlarm No alarm present

2 dsx3RcvRAIFailure Receiving Yellow/Remote AlarmIndication

4 dsx3XmitRAIAlarm Transmitting Yellow/Remote AlarmIndication

8 dsx3RcvAIS Receiving AIS failure state

16 dsx3XmitAIS Transmitting AIS

32 dsx3LOF Receiving LOF failure state

64 dsx3LOS Receiving LOS failure state

128 dsx3LoopbackState Looping the received signal

256 dsx3RcvTestCode Receiving a Test Pattern

512 dsx3OtherFailure Any line status not defined here

1024 dsx3UnavailSigState Near End in Unavailable Signal State

2048 dsx3NetEquipOOS Carrier Equipment Out of Service

Corrective Action -

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.2 EMS Alarms

4.2.1 EMS Trap Receiver Binding Error

EMS Trap Receiver Binding Error

Textual Description This alarm is generated during server startup if an error occursindicating that the SNMP trap receiver port is already taken.

SNMP OID acEMSSnmpCannotBindError- 1.3.6.1.4.1.5003.9.20.3.2.0.1

AlarmTit le [Event] EMS Trap Receiver Binding Error

ItuAlarmType Environmental Alarm

AlarmSource EMS Server

Probable Cause Application Subsystem Failure

Severity Critical

Addi tional Info -

Corrective Action Run netstats command to verify which application uses the alarmsreception port (by default UDP post 162).

EMS application: If it's busy, check which application uses this port.If it's not freed by the EMS application, restart the EMS Serverapplication according to the equipment installation manual.

Other network management application: change the EMSapplication and all managed gateways' default alarm reception

ports.Media Gateways All the gateways managed by the EMS

7/23/2019 LTRT-32105 Mediant 3000




4.2.2 GW Connection Alarm

GW Connection Alarm

Textual Description Originated by the EMS when an SNMP Timeout occurs for the first timein the Media Gateway

SNMP OID acEMSNodeConnectionLostAlarm - 1.3.6.1.4.1.5003.9.20.3.2.0.3

AlarmTit le GW Connection Alarm

ItuAlarmType Communications Alarm

AlarmSource Media Gateway

Probable Cause Communications Subsystem Failure

Severity Critical

Addi tional Info -Corrective Action Communication problem: Try to ping the gateway to check if there is

network communication.

Default gateway alive: Open the network screen. Check the defaultgateway IP address and ping it.

SNMP Community Strings: Verify that the community string definedin the EMS for the gateway matchs the actual gateway communitystrings. To check the community string, right-click on the gateway,select the 'Details' menu. Default community strings: read = public,write = private.

Hardware Problem: Check that the gateway is alive according tothe LEDs. Verify that network and power cables are in place and

plugged in.

Media Gateways All the gateways managed by the EMS

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.2.3 GW Mismatch Alarm

GW Mismatch Alarm

Textual Description Activated when the EMS detects a hardware, software, predefine orconfiguration mismatch.

1. Software Mismatch:

Activated when the EMS detects a software version mismatchbetween the actual and the previous definition of the MediaGateway (for example, Version 4.0.353 instead of the previouslydefined 4.0.278). This is also the case when the new version is notdefined in the Software Manager.

2. Hardware Mismatch

Activated when the EMS detects a hardware mismatch between

the actual and the previous definition of a Media Gateway.3. Configuration Mismatch

Activated when the EMS detects a configuration mismatchbetween the actual parameter values provisioned and previousparameter values provisioned.

SNMP OID acEMSNoMismatchNodeAlarm - 1.3.6.1.4.1.5003.9.20.3.2.0.9

AlarmTit le GW Mismatch Alarm

ItuAlarmType Equipment Alarm

AlarmSource Media Gateway/SoftwareMedia Gateway/Hardware

Media Gateway/Configuration


Severity Clear

Addi tional Info -

Corrective Action 1. Software Mismatch:

Define the detected version in the EMS Software Manager

Perform a Software Upgrade on the gateway with one of thesupported versions.

2. Hardware Mismatch:

Perform remove / add a gateway from the EMS tree in order toresync EMS and the gateway status

Verify in the Software Manager that an appropriate versionexists for the hardware type displayed in the error message

3. Configuration Mismatch

Run Configuration Verification command in order to compareEMS configuration and actual MG configuration:

-MG configuration is wrong: use configuration download to

7/23/2019 LTRT-32105 Mediant 3000




update MG with correct configuration saved in the EMSdatabase.

-MG is cor rect, EMS is not updated: use configuration uploadto save a correct MG configuration in the EMS database.

Check the Actions Journal for recent updates of the gateway.

Media Gateways All the gateways managed by the EMS.

4.2.4 EMS Server Started

EMS Server Started

Textual Description Originated each time the server is started or restarted (warmboot/reboot) by the EMS Watchdog Process

SNMP OID acEMSServerStartup- 1.3.6.1.4.1.5003.9.20.3.2.0.11

AlarmTit le [Event] EMS Server Started




Severity Major

Addi tional Info -

Corrective Action -


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.2.5 Disk Space Alarm

Disk Space Alarm

Textual Description Originated when the EMS Server hard disk capacity is almost full.

SNMP OID acEMSNotEnoughDiskSpaceAlarm - 1.3.6.1.4.1.5003.9.20.3.2.0.12

AlarmTit le Disk Space Alarm

ItuAlarmType Environment Alarm


Probable Cause -

Severity Critical - disk usage > 80 %Major - disk usage > 70 %

Addi tional Info -Corrective Action Clean all unnecessary files

Expand the hard disk


4.2.6 Software Replaced

Software Replaced

Textual Description Originates when the EMS discovers a software version replace

between board versions, for example, from V4.6.009.004 toV4.6.152.003 (when both versions are managed by the EMS).

Software Replace old version : <old version> new version <newversion>

SNMP OID acEMSSoftwareReplaceAlarm- 1.3.6.1.4.1.5003.9.20.3.2.0.14

AlarmTit le [Event] Software Replaced




Severity Info

Addi tional Info If you initiated a performance measurements polling process beforeyou initiated the software replacement process, the polling process isstopped.

Corrective Action No action should be taken; this is an information alarm.


7/23/2019 LTRT-32105 Mediant 3000




4.2.7 Hardware Replaced

Hardware Replaced

Textual Description Originated when the EMS discovers a different gateway (according tothe MAC address) to what was initially defined, while the HardwareType remains the same.

Hardware Replace is discovered by the MAC address and performedduring Board Started trap.

SNMP OID acEMSHardwareReplaceAlarm - 1.3.6.1.4.1.5003.9.20.3.2.0.15

AlarmTit le [Event] Hardware Replaced

ItuAlarmType Equipment Alarm

AlarmSource Media Gateway


Severity Major

Addi tional Info -

Corrective Action -

Media Gateways MediaPacks, Mediant 1000, Mediant 2000, Mediant 3000

4.2.8 HTTP/HTTPS Access Disabled

HTTP/HTTPS Access Disabled

Textual Description Originated when HTTP access is disabled by EMS hardening but theEMS manages media gateways that require HTTP access for softwareupgrade.

Originated on server startup.

SNMP OID acEMSHTTPDisabled - 1.3.6.1.4.1.5003.9.20.3.2.0.16

AlarmTit le [Event] HTTP/HTTPS Access Disabled

ItuAlarmType Environmental Alarm


Probable Cause Application Subsystem Failure

Severity Major

Addi tional Info -

Corrective Action Separate the gateways between two EMS Servers (secured &unsecured)

Media Gateways Gateways using the HTTP server for the software upgrade procedure:MediaPacks, Mediant 1000, Mediant 2000, Mediant 3000

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.2.9 PM File Generated

PM File Generated

Textual Description Originated when a PM file is generated in the EMS Server, and it canbe retrieved by a higher level management system.

SNMP OID acEMSPmFileGenerate - 1.3.6.1.4.1.5003.9.20.3.2.0.18

AlarmTit le [Event] PM File Generated

ItuAlarmType Other



Severity Info

Addi tional Info The performance summary data from<start polling interval time>to<timeStempFileTo> of media gateway<nodeIPAdd> was saved inPM file <fileName>.

Corrective Action -

Media Gateways All Gateways

7/23/2019 LTRT-32105 Mediant 3000




4.2.10 PM Polling Error

PM Polling Error

Textual Description Originated when a PM History stops collecting performance summarydata from MG. Possible reasons are: NTP synchronization lost,Connection Loss, SW Mismatch, etc..

SNMP OID acEMSPmHistoryAlarm - 1.3.6.1.4.1.5003.9.20.3.2.0.19

AlarmTit le [Event] PM Polling Error

ItuAlarmType Other



Severity Minor

Addi tional Info

Corrective Action Verify in the 'Textual Description' (see above) the reason why the PMhistory stopped.

When the reason is 'NTP synchronization lost', verify that thegateway and the EMS Server machine are synchronized to thesame NTP server and have accurate time definitions.

When the reason is 'Software Mismatch', you can stop the PMhistory collection until the new version is added to the SoftwareManager.

When the reason is 'Connection Loss' between the EMS Serverand the gateway, polling continues automatically when theconnection is re-established; the purpose of the alarm in this caseis to inform users of missing samples.

Note: The alarm continues to activate every 15 minutes unless you fixthe problem or manually stop PM polling of the Gateway.

Media Gateways All Gateways

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.2.11 Cold Start Missed

Cold Start Missed

Textual Description Originated when Carrier Grade Alarm System recognizes coldStarttrap has been missed

SNMP OID acEMSNodeColdStartMissedEvent - 1.3.6.1.4.1.5003.9.20.3.2.0.20

AlarmTit le [Event] Cold Start Missed

ItuAlarmType Other

AlarmSource

Probable Cause Receive failure

Severity Clear

Addi tional Info Corrective Action

Media Gateways All the managed Gateways

4.2.12 Security Alarm

Security Alarm

Textual Description Activated when one of more Radius servers are not reachable. Whennone of the radius servers can be reached, Critical Severity alarm isgenerated

SNMP OID acEMSSecurityAlarm - 1.3.6.1.4.1.5003.9.20.3.2.0.23

AlarmTit le Security Alarm

ItuAlarmType Processing Error Alarm

AlarmSource EMS Server / Radius <#>


Severity Minor, Major, Critical

Addi tional Info Corrective Action

Media Gateways

7/23/2019 LTRT-32105 Mediant 3000




4.2.13 Security Event

Security Event

Textual Description This event is generated when a specific user is blocked after reachingthe maximum number of login attempts, or when EMS failed to syncEMS and Mediant 5000 / 8000 users.

SNMP OID acEMSSecurityEvent - 1.3.6.1.4.1.5003.9.20.3.2.0.24

AlarmTit le [Event] Security Event

ItuAlarmType Other

AlarmSource EMS Server / User Name,

EMS Sever / User Sync


Severity Indeterminate

Addi tional Info

Corrective Action

Media Gateways

4.2.14 Topology Update Event

Topology Update Event

Textual Description This event is issued by the EMS when a Gateway or Region isadded/removed/updated in the EMS application and includes thefollowing information:

Action: Add / Remove / Update GW or Region

Region Name

GW Name

GW IP

Note: For opening an EMS client in the MG context, the gateway IP

address should be provided.

SNMP OID

acEMSTopologyUpdateEvent - 1.3.6.1.4.1.5003.9.20.3.2.0.25

Alarm Tit le [Event] Topology Update

Alarm Source EMS Server


Alarm Type Other


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

Addi tional Info Additional Info 1 field will include following details:

Region: X1 'X2' [GW: Y1 'Y2' 'Y3' 'Y4']

X1 = Region ID (unique identifier in the EMS data base used for regionidentification)

X2 = Region name as it defined by EMS operatorY1 = GW ID (unique identifier in the EMS data base used for GWidentification)

Y2 = GW Name as it defined by EMS operator

Y3 = GW IP as it defined by EMS operator

Y4 = GW Type as it identified by EMS during the first connection to theGW. If first connection was not successful during the add operation, itwill trigger an 'Add GW' event with Unknown GW type, and 'UpdateGW' event once the initial connection to the GW has been successfull.The following GWs will be supported: MP,M1K, M2K, M3K, M5K, M8K

Region details will always be part of the alarm, while GW info will bedisplayed when event is GW related.

All the fields related to the GW will always be displayed to allow easyparsing.

Examples:

(Description=Add Region) Region: 7 'Test Lab'

(Description=Update Region) Region: 7 'My Updated Region'

(Description=Add GW) Region: 7 'My Updated Region', GW:22 'MG14' '1.2.3.4' 'Unknown', PM Polling: disabled

(Description=Update GW) Region: 7 'My Updated Region', GW:

22 'My MG 15' '4.5.6.7' 'M3K'(Description=Update GW) Region: 7 'My Updated Region', GW:22 'My MG 15' '4.5.6.7', PM Polling: enabled

(Description=Remove GW) Region: 7 'My Updated Region', GW:22 'My MG 15' '4.5.6.7' 'M3K', Polling: enabled

(Description=Remove Region) Region: 7 'My Updated Region'

Corrective Action

Media Gateways

7/23/2019 LTRT-32105 Mediant 3000




4.2.15 Topology File Event

Topology File Event

Textual Description This event is issued by the EMS when the Topology File is updated onthe EMS Server machine.The Topology file is automatically updatedupon the addition /removal of a Media Gateway or upon updates to theMedia Gateway properties. For more information, see the OAMPIntegration Guide.

SNMP OID

acEMSTopologyFileEvent- 1.3.6.1.4.1.5003.9.20.3.2.0.26

Alarm Tit le [Event] Topology File

Alarm Source


Alarm Type Other


Addi tional Info File Name: MGsTopologyList.csv

Corrective Action

Media Gateways

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.2.16 Synchronizing Alarms Event

Synchronizing Alarms Event

Textual Description This event is issued when the EMS is not able to retrieve the entiremissing alarms list from the History table. Information regarding thenumber of retrieved alarms, and number of alarms EMS failed toretrieve is provided in the Additional Info field.

SNMP OID

acEMSSyncAlarmEvent - 1.3.6.1.4.1.5003.9.20.3.2.0.27

Alarm Tit le [Event] Synchronizing Alarms

Alarm Source EMS Server


Alarm Type Other

Probable Cause

Other

Addi tional Info

Retrieved x missed alarms, failed to retrieve y alarms.

Corrective Action

Media Gateways

7/23/2019 LTRT-32105 Mediant 3000




4.2.17 Synchronizing Active Alarms Event

Synchronizing Active Alarms Event

Textual Description This event is issued when the EMS is not able to performsynchronization with the History alarms table, and instead performssynchronization with the Active Alarms Table.

SNMP OID

acEMSSyncActiveAlarmEvent - 1.3.6.1.4.1.5003.9.20.3.2.0.28

Alarm Tit le [Event] Synchronizing Active Alarms

Alarm Source


Alarm Type Other

Probable Cause

Other

Addi tional Info

Corrective Action

Media Gateways

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.2.18 License Key Alarm

License Key Alarm

Textual Description This alarm is raised when one of the following occurs::

EMS Application License is expired.

EMS Application License will be expired within one month.

Gateway management is not covered by the current EMSApplication License (the maximum number of EMS licenses formanaging this gateway has been exceeded).

SNMP OID acEMSLicenseKeyAlarm - 1.3.6.1.4.1.5003.9.20.3.2.0.29

Alarm Tit le EMS License Key Alarm

Alarm Source

Severity Major/Critical

Alarm Type Other

Probable Cause keyExpired

Addi tional Info

Corrective Action

Media Gateways

7/23/2019 LTRT-32105 Mediant 3000




4.3 Mediant 3000 Alarms

4.3.1 Board Fatal Error

Board Fatal Error

Description Board fatal error

SNMP Alarm acBoardFatalError

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.1

Alarm Tit le Board Fatal Error


Alarm Source

Probable Cause Underlying resource unavailable

Severity Critical

Addi tional Info1,2,3 NULL

Corrective Action Capture the Syslog alarm data and send it to Technical Support who willprobably instruct you to collect additional data from the device.

4.3.2 Configuration Error

Configuration Error

Description Configuration Error

SNMP Alarm acBoardConfigurationError

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.2

Alarm Tit le [Event] Configuration Error


Alarm Source

Probable Cause Underlying resource unavailableSeverity Critical


Corrective Action Inspect the run-time specific string to determine the nature of theconfiguration error. Fix the configuration error using the appropriate tool:Web interface, EMS, or ini file. Save the configuration and if necessaryreset the device.

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.3 Temperature Alarm

Temperature Alarm

Description The temperature alarm is set off when the temperature exceeds 60degrees Celsius, and ceases when the temperature again falls below55 degrees Celsius.

Alarm raise - 'The temperature is too high'Alarm clear - 'The temperature is normal'

SNMP Alarm acBoardTemperatureAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.3

Alarm Tit le Temperature Alarm


Alarm Source

Probable Cause Temperature unacceptable

Severity Critical


Corrective Action Inspect the system. Determine if all fans in the system are operatingcorrectly.

7/23/2019 LTRT-32105 Mediant 3000




4.3.4 Initialization Ended

Initialization Ended

Description Sent when the device is initialized and ready to run

SNMP Alarm acBoardEvBoardStarted

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.4

Alarm Tit le [Event] Initialization Ended


Alarm Source


Severity Major


4.3.5 Board Resetting Following Software Reset

Table 2-3: Board Resetting Follow ing Software Reset

Description The device started the reset process - following software reset

SNMP Alarm acBoardEvResettingBoard

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.5

Alarm Tit le Board Resetting Following Software Reset

Alarm Type Other

Alarm Source


Severity Critical

Addi tional Info1,2,3 'AdditionalInfo1', 'AdditionalInfo2', 'AdditionalInfo3',

Corrective Action A network administrator has taken action to reset the device. Nocorrective action is needed.

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.6 Feature Key Related Error

Feature Key Related Error

Description Feature key error

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.6

4.3.7 Gateway Administrative State Changed

Gateway Administrative State Changed

Description The administrative state of the gateway has been changed to a new

state.Note that all state changes are instigated by the parameteracgwAdminState.

Time limit set in the parameter acgwAdminStateLockControl -'GateWay shutting down. Max time to LOCK %d sec'

No time limit in the parameter acgwAdminStateLockControl -'GateWay is shutting down. No time limit.'

When reaching lock state - 'GateWay is locked'

When the gateway is SET to be unlocked 'GateWay is unlocked (fullyactive again)'

SNMP Alarm acgwAdminStateChangeSNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.7

Alarm Tit le Administrative State Change


Alarm Source


Severity Major

Major

Major

Cleared


Corrective Action A network administrator has taken an action to lock the device. Nocorrective action is required.

7/23/2019 LTRT-32105 Mediant 3000




4.3.8 No Free Channels Available

No Free Channels Available

Description Almost no free resources for the call are available.Activated only if the parameter EnableRai is set.The threshold is determined according to parametersRAIHIGHTHRESHOLD and RAILOWTHRESHOLD.

SNMP Alarm acBoardCallResourcesAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.8

Alarm Tit le No Free Channels Available

Alarm Type Other

Alarm Source 'GWAPP'


Severity Major / Clear

Addi tional Info1,2,3 -

4.3.9 Gatekeeper/Proxy not Found or Registration Failed

Gatekeeper/Proxy not Found or Registration Failed

Description The Controller (H.323 Gatekeeper / SIP Proxy) is not found orregistration has failed. Internal routing table may be used for routing.

'Proxy lost. Looking for another proxy''Proxy not found. Use internal routing''Proxy found. ip:a.b.c.d''Gatekeeper not found. ip:a.b.c.d''Gatekeeper not found. ip:a.b.c.d Fallback to internal routing used''Gatekeeper not found. ip:a.b.c.d Redundant Gatekeeper enabled''Gatekeeper found. ip:a.b.c.d'

SNMP Alarm acBoardControllerFailureAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.9

Alarm Tit le Gatekeeper/Proxy not Found or Registration Failed

Alarm Type Other





7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.10 Ethernet Link Down Alarm

Ethernet Link Down Alarm

Description Ethernet link is down or remote Ethernet link is down and the board hasno communication to any other host.

No link at all.

Link is up again.

Primary link is down only - 'Primary Link is lost. Switching toSecondary Link'

SNMP Alarm acBoardEthernetLinkAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.10

Alarm Tit le Ethernet Link Down Alarm

Alarm Type Equipment Alarm Alarm Source

Probable Cause Input/Output Device Error

Other

Underlying resource unavailable

Severity Critical

Cleared

Major


Corrective Action Ensure that both Ethernet cables are plugged into the back of thesystem. Inspect the system's Ethernet link lights to determine whichinterface is failing. Reconnect the cable or fix the network problem.

7/23/2019 LTRT-32105 Mediant 3000




4.3.11 System Component Overloaded

System Component Overloaded

Description Overload in one or more of the system's components

SNMP Alarm acBoardOverloadAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.11

Alarm Tit le System Component Overloaded

Alarm Type Other





4.3.12 Active Alarms Table Overflow

Active Alarms Table Overf low

Description Alarm is raised when too many alarms to fit in the active alarm table. Thestatus stays major until reboot as it denotes a possible loss of

information until the next reboot. If an alarm was raised when the tablewas full, it is possible that the alarm is active, but does not appear in theactive alarm table.

SNMP Alarm acActiveAlarmTableOverflow

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.12

Alarm Tit le [Event] Active Alarm Table Overflow

Alarm Type Processing Error Alarm

Alarm Source MG

Probable Cause resourceAtOrNearingCapacity (43)

Severity Major Addi tional Info1,2,3 -

Corrective Action Some alarm information may have been lost, but the ability of the deviceto perform its basic operations has not been impacted. A reboot is theonly way to completely clear a problem with the active alarm table.Contact your first-level group.

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.13 Audio Provisioning Alarm

Audio Provis ioning Alarm

Description Alarm is raised when APS is unable to provision audio. Media servertimes out waiting for a successful audio distribution from the APS (AudioProvisioning Server)

SNMP Alarm acAudioProvisioningAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.14

Alarm Tit le Audio Provisioning Alarm

Alarm Source

Alarm Type processingErrorAlarm

Probable Cause configurationOrCustomizationError

Severity Critical on raise, Clear on clear

Addi tional Info

Corrective Action In the APS (Audio Provisioning Server) GUI, ensure that the device iscorrectly configured with audio and that the device was enabled. Ensurethat the IP address for the APS was correctly specified on the device.Ensure that both the APS server and application are in service. To obtaindetailed information on the problem, view the device Syslogs as well asthe APS manager logs.

4.3.14 Operational State Change

Operational State Change

Description This alarm is raised if the operational state of the node goes to disabled.The alarm is cleared when the operational state of the node goes toenabled.

SNMP Alarm acOperationalStateChange

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.15

Alarm Tit le Operational State Change

Alarm Source


Probable Cause outOfService


Addi tional Info

Corrective Action -

7/23/2019 LTRT-32105 Mediant 3000




4.3.15 Keep Alive Trap

Keep Alive Trap

Description This traps is sent The STUN client in the board is enabled and has eitheridentified a NAT or is not finding the STUN server

The ini file contains the following line: 'SendKeepAliveTrap=1'

Keep-alive is sent out every x second.x =0. 9 of the time defined in theNatBindingDefaultTimeout parameter

SNMP Alarm acKeepAlive

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.16

Alarm Tit le [Event] Keep Alive Trap

Alarm Source

Alarm Type other

Probable Cause other


Addi tional Info

Corrective Action -

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.16 NAT Traversal Alarm

NAT Traversal Alarm

Description The STUN client in the board is enabled and has either identified a NATor is not finding the STUN server.

The in i file contains the following line: 'SendKeepAliveTrap=1'

Keep-alive is sent out every 9/10 of the time defined in theNatBindingDefaultTimeout parameter.

SNMP Alarm acNATTraversalAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.17

Alarm Tit le NAT Traversal Alarm

Alarm Type other (0)

Alarm Source MG

Probable Cause other (0)



Corrective Action -

4.3.17 SS7 Link State Change Alarm

SS7 Link State Change Alarm

Description Operational state of the link becomes 'IN-SERVICE' or 'OFFLINE'.

*** SS7 *** Link %i is %s $s

%i - <Link number>%s - <state name>: { 'OFFLINE', 'BUSY', 'INSERVICE'}%s - IF link has MTP3 layer, then this string equals:(SP %i linkset %i slc %i)

Where:

%i - <SP number>%i - <Link-Set number>%i - <SLC number>

Otherwise there is NO additional text.

SNMP Alarm acSS7LinkStateChangeAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.19

Alarm Tit le SS7 Link State Change Alarm

Alarm Type communicationsAlarm

Alarm Source SS7/Link#

7/23/2019 LTRT-32105 Mediant 3000





Severity Major, Clear


Corrective Action For full details, refer to the equipment documentation and the standards

relevant to SS7 MTP3.

4.3.18 SS7 Link Inhibit State Change Alarm

SS7 Link Inhibi t State Change Alarm

Description This alarm is raised for any change in the remote or local inhibitionstatus.

*** SS7 *** Link %i (SP %i linkset %i slc %i) is %s

%i - <Link number>%i - <SP number>%i - <Link-Set number>%i - <SLC number>%s - <congestion state>: { 'UNINHIBITED', 'INHIBITED' }

SNMP Alarm acSS7LinkInhibitStateChangeAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.20

Alarm Tit le SS7 Link Inhibit State Change Alarm



Alarm Source SS7/Link#



Corrective Action Make sure the link is uninhibited - on both local and remote sides

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.19 SS7 Link Congestion State Change Alarm

SS7 Link Congestion State Change Alarm

Description This alarm is raised for any change in the remote or local congestionstatus. Raise alarm is generated when status is CONGESTED, and clearalarm is generated when status is UNCONGESTED (local or remote).

*** SS7 *** Link %i is %s %s.

%i - <Link number>

%s - IF link has MTP3 layer, then this string equals:

(SP %i linkset %i slc %i)

Where:

%i - <SP number>

%i - <Link-Set number>

%i - <SLC number>

Otherwise there is NO additional text.

%s - <congestion state>: { 'UNCONGESTED', 'CONGESTED' }

SNMP Alarm acSS7LinkCongestionStateChangeAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.22

Alarm Tit le SS7 Link Congestion State Change Alarm


Alarm Source -Probable Cause Other



Corrective Action Reduce SS7 traffic on that link.

7/23/2019 LTRT-32105 Mediant 3000




4.3.20 SS7 Linkset State Change Alarm

SS7 Linkset State Change Alarm

Description Alarm is sent when Route Set operational state is changed. Alarm israised when status is BUSY, and cleared when status is OFFLINE, orINSERVICE.

*** SS7 *** Linkset %i on SP %i is <'OFFLINE', 'BUSY', 'INSERVICE'>

SNMP Alarm acSS7LinkSetStateChangeAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.23

Alarm Tit le SS7 LinkSet State Change Alarm


Alarm Source SS7/SP#/Linset#




Corrective Action For full details, refer to the equipment documentation and the standardsrelevant to SS7 MTP3.

4.3.21 SS7 Routeset State Change Alarm

SS7 Routeset State Change Alarm

Description Alarm is sent when Route Set operational state is changed. Alarm israised when status is BUSY, and cleared when status is OFFLINE, orINSERVICE.

*** SS7 *** Routeset %i on SP %i is <'OFFLINE', 'BUSY', 'INSERVICE'>

SNMP Alarm acSS7RouteSetStateChangeAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.24

Alarm Tit le SS7 Route Set State Change Alarm


Alarm Source SS7/SP#/RouteSet#




Corrective Action For full details, refer to the equipment documentation and the standardsrelevant to SS7 MTP3.

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.22 SS7 Node State Change Alarm

SS7 Node State Change Alarm

Description SS7 SN Set State Change Alarm. Alarm is raised when status is BUSY,and cleared when status is OFFLINE, or INSERVICE.

*** SS7 *** SP # i is < 'BUSY','OFFLINE', 'INSERVICE'>

SNMP Alarm acSS7SNSetStateChangeAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.25

Alarm Tit le SS7 Node State Change Alarm


Alarm Source SS7/SP#

Probable Cause otherSeverity Major on raise condition, Clear


Corrective Action Signaling Node must complete its MTP3 restart procedure and becomeun-isolated

4.3.23 Threshold of Performance Monitored Object Exceeded

Threshold of Performance Monitored Object Exceeded

Description This alarm raised when a performance counter has crossed the high /low threshold.

'Performance: Threshold alarm was set', with source = name of theperformance counter which caused the trap

SNMP Alarm acPerformanceMonitoringThresholdCrossing

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.27

Alarm Tit le Threshold of Performance Monitored Object Exceeded

Alarm Type Other

Alarm Source MO Path


Severity Indeterminate (this is a notification; it's not automatically cleared)


Corrective Action -

7/23/2019 LTRT-32105 Mediant 3000




4.3.24 HTTP Download Result

HTTP Download Resul t

Description This is a log message (not alarm) indicating both sucessfull or failedHTTP Download result.

SNMP Alarm acHTTPDownloadResult

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.28

Alarm Tit le [Event] HTTP Download Result

Alarm Source

Alarm Type processingErrorAlarm (3) for failures and other (0) for success


Severity Indeterminate Addi tional Info -

Corrective Action -

4.3.25 Fan Tray Alarm

Fan Tray Alarm

Description Alarm is generated in one of the following cases: Fan-Tray is missing

One or more fans in the fan-tray is faulty.

Fan tray is in place and fans are functioning.

SNMP Alarm acFanTrayAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.29

Alarm Tit le Fan Tray Alarm

Alarm Source Chassis#0/FanTray#0


Alarm Source

Probable Cause heatingVentCoolingSystemProblem

Severity Critical

Major

Clear

Addi tional Info -

Corrective Action -

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.26 Power Supply Alarm

Power Supply Alarm

Description Activated if either:

The HA (High Availability) feature is active and one of the powersupply units is faulty or missing.

PS unit is inserted in its location and functioning.

SNMP Alarm acPowerSupplyAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.30

Alarm Tit le Power Supply Alarm

Alarm Source Chassis#0/PowerSupply#<m> where m is the power supply's slotnumber


Probable Cause Power problem

Severity Major

Clear

Addi tional Info -

Corrective Action -

4.3.27 PEM Module Alarm

PEM Module Alarm

Description Activated if either:

The HA (High Availability) feature is active and one of the PEM(Power Entry Module) units is missing

PEM card is in its location and both DC wires are in.

SNMP Alarm acPEMAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.31

Alarm Tit le PEM Module Alarm Alarm Source Chassis#0/PemCard#<m> where m is the power entry module's slot

number

Alarm Type equipmentAlarm

Probable Cause underlyingResourceUnavailable

Severity Critical

Clear

Addi tional Info -

Corrective Action -

7/23/2019 LTRT-32105 Mediant 3000




4.3.28 SA Module Missing Alarm

SA Module Missing Alarm

Description Activated when the SA module removed or missing.

SNMP Alarm acSAMissingAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.32

Alarm Tit le SA Module Missing Alarm

Alarm Source Chassis#0/SA#<m> where m is the Shelf Alarm module's slot number


Probable Cause Underlying resource unavailable

Severity Critical on raise, Clear on clear.

Addi tional Info -

Corrective Action -

4.3.29 HA System Fault Alarm

(Applies to the Mediant 3000 HA only)

HA System Fault Alarm

Description Originated when: HA feature is active but the system is NOT working in HA mode.

Reason is specified (for example: SW WD exception error, HW WDexception error, SAT device is missing, SAT device error, DSP error,BIT tests error, etc).

HA feature is active and the redundant module is in start up mode buthasn't connected yet

HA system is active

SNMP Alarm acHASystemFaultAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.33

Alarm Tit le HA System Fault Alarm

Alarm Source System#0/Module#<m> where m is the 6310 module's slot number

Alarm Type Quality Of Service Alarm

Probable Cause Out of service

Severity Critical

Minor

Clear

Addi tional Info -

Corrective Action -

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.30 HA System Configuration Mismatch Alarm

(Applies to the Mediant 3000)

HA System Configuration Mismatch Alarm

Description HA feature is active. The active module was unable to transfer theLicense Key to the redundant module.

SNMP Alarm acHASystemConfigMismatchAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.34

Alarm Tit le HA System Configuration Mismatch Alarm

Alarm Source System#0/Module#<m> where m is the TPM-6310's slot number

Alarm Type Processing Error Alarm

Probable Cause Configuration or customization errorSeverity Major on raise, Clear on clear

Addi tional Info -

Corrective Action -

4.3.31 HA System Switch Over Alarm

(Applies to the Mediant 3000)

HA System Switch Over Alarm

Description Switch-over has occurred.

SNMP Alarm acHASystemSwitchOverAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.35

Alarm Tit le HA System Switch Over Alarm

Alarm Source System#0/Module#<m> where m is the 6310 module's slot number

Alarm Type Quality Of Service Alarm

Probable Cause Out of service


Addi tional Info -

Corrective Action -

7/23/2019 LTRT-32105 Mediant 3000




4.3.32 User Input Alarm

User Input Alarm

Description Input dry contact is short circuited / reopened

SNMP Alarm acUserInputAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.36

Alarm Tit le User Input Alarm

Alarm Source Chassis#0


Probable Cause Input Device Error

Severity Critical on raise, Clear on clear.

Addi tional Info -

Corrective Action -

4.3.33 D-Channel Status

Applies to digital media gateways.

D-Channel Status

Description D-Channel un-established / established

SNMP Alarm acDChannelStatus

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.37

Alarm Tit le D-Channel Status

Alarm Source Trunk no.<m> where m is the trunk number (from 0 up).

Alarm Type Communications Alarm

Probable Cause Communications Protocol Error

Severity Minor on raise, Clear on clear

Addi tional Info -Corrective Action -

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.34 SONET Section LOF Alarm

This alarm is only relevant for the Mediant 3000.

SONET Section LOF Alarm

Description LOF condition is present on SONET no#m.

The field 'sonetSectionCurrentStatus' in the sonetSectionCurrentTablewill have a value of sonetSectionLOF (4).

SNMP Alarm acSonetSectionLOFAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.38

Alarm Tit le SONET Section LOF Alarm

Alarm Source Interfaces#0/Sonet#<m> where m is the SONET I/F number

Alarm Type Communications AlarmProbable Cause Loss of frame


Addi tional Info -

Corrective Action -

4.3.35 SONET Section LOS Alarm


SONET Section LOS Alarm

Description LOS or AIS condition is present on SONET no #m.

The field 'sonetSectionCurrentStatus' in the sonetSectionCurrentTablewill have a value of sonetSectionLOS (2).

SNMP Alarm acSonetSectionLOSAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.39

Alarm Tit le SONET Section LOS Alarm



Probable Cause Loss of signal


Addi tional Info -

Corrective Action -

7/23/2019 LTRT-32105 Mediant 3000




4.3.36 SONET Line AIS Alarm


SONET Line AIS Alarm

Description AIS condition is present on SONET-Line #m.

The field 'sonetLineCurrentStatus' in the sonetLineCurrentTable will havea value of sonetLineAIS (2).

SNMP Alarm acSonetLineAISAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.40

Alarm Tit le SONET Line AIS Alarm


Alarm Type Communications AlarmProbable Cause Receive Failure


Addi tional Info -

Corrective Action -

4.3.37 SONET Line RDI Alarm


SONET Line RDI Alarm

Description RDI condition is present on SONET-Line no#m.

The field 'sonetLineCurrentStatus' in the sonetLineCurrentTable will havea value of sonetLineRDI (4).

SNMP Alarm acSonetLineRDIAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.41

Alarm Tit le SONET Line RDI Alarm



Probable Cause Transmit failure


Addi tional Info -

Corrective Action -

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.38 SONET/SDN IF Failure Alarm


SONET/SDN IF Failure Alarm

Description Indicates a HW failure on SONET-Line no#m

SNMP Alarm acSonetIfHwFailureAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.42

Alarm Tit le SONET/SDH IF Failure Alarm



Probable Cause Transmit failure


Addi tional Info

Corrective Action -

4.3.39 H.248 Lost Connection with CA

The alarm is unsupported in this version. Applies to digital gateways runningMEGACO control protocol.

H.248 Lost Connection with CA

Description Indicates an MG loss communication with one of the provisioned CallAgents (MGC - Media Gateway Controller). Alarm message include callAgent IP Address.

SNMP Alarm acH248LostConnectionWithCA

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.44

Alarm Tit le H248 Lost Connection with CA

Alarm Source

Alarm Type Communication AlarmProbable Cause Out Of Service


Addi tional Info

Corrective Action -

7/23/2019 LTRT-32105 Mediant 3000




4.3.40 Hitless Update Event


Trunk LOS Alarm

Description A Notification trap that is sent out at the beginning and the end of aHitless SW update.

Failure during the process will also instigate the trap. May include thefollowing information:

Hitless: start SW upgrade.

Hitless: Stream read error, aborting CMP file processing.

Hitless: Invalid cmp file - missing Ver parameter.

Hitless fail: Hitless sw upgrade is not supported under version 5.2.

Hitless fail: SW ver stream name too long.

Hitless fail: Invalid cmp file - missing UPG parameter.

Hitless fail: Hitless SW upgrade not supported.

Hitless fail: Communication with redundant module failed.

Hitless: SW upgrade ended successfully.

SNMP Alarm acHitlessUpdateStatus

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.48

Alarm Tit le Hitless Update Event

Alarm Source Automatic Update Alarm Type other



Addi tional Info

Corrective Action

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.41 Trunk LOS Alarm

This alarm is relevant for Digital Gateways with E1/T1Trunks.

Trunk LOS Alarm

Description Loss of signal at trunk's near end

SNMP Alarm acTrunksAlarmNearEndLOS

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.49

Alarm Tit le Trunk LOS Alarm

Alarm Source Port#<n> where n is the digital trunk number


Probable Cause lossOfSignal

Severity Critical

Addi tional Info

Corrective Action Check trunk's connectivity

4.3.42 Trunk LOF Alarm


Trunk LOF Alarm

Description Loss of frame at trunk's near end

SNMP Alarm acTrunksAlarmNearEndLOF

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.50

Alarm Tit le Trunk LOF Alarm



Probable Cause lossOfFrame

Severity Critical Addi tional Info


7/23/2019 LTRT-32105 Mediant 3000




4.3.43 Trunk AIS Alarm


Trunk AIS Alarm

Description Received AIS from trunk's far end

SNMP Alarm acTrunksAlarmRcvAIS

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.51

Alarm Tit le Trunk AIS Alarm



Probable Cause receiveFailure

Severity Critical

Addi tional Info


4.3.44 Trunk RAI Alarm


Trunk RAI Alarm

Description Loss of frame at trunk's far end

SNMP Alarm acTrunksAlarmFarEndLOF

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.52

Alarm Tit le Trunk RAI Alarm



Probable Cause transmitFailure

Severity Critical Addi tional Info


7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.45 TM Inconsistency

This alarm is only relevant for the Mediant 3000 Gateway.

TM Inconsis tency

Description Timing Manager Alarm. This alarm is triggered when the system is in a1+1 status and the redundant board PLL status is different to the activeboard PLL status.

SNMP Alarm

acTMInconsistentRemoteAndLocalPLLStatus

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.56

Alarm Tit le TM Inconsistency

Alarm Source




Addi tional Info Status stays major until reboot. A clear trap is not sent.

Corrective Action

Synchronize the timing module.

7/23/2019 LTRT-32105 Mediant 3000




4.3.46 TM Reference Status

This alarm is only relevant for the Mediant 3000 Gateway using the BITsSynchronization Timing mode.

TM Reference Status

Description Timing Manager Alarm. This alarm is triggered when either the primaryor secondary BITs reference or both BITs references are not responding.

SNMP Alarm

acTMReferenceStatus

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.57

Alarm Tit le TM Reference Status

Alarm Source



Severity Major, Critical, Clear

Addi tional Info When the primary and secondary BITs clock references do not respondin more than 24 hours, an alarm will be escalated to critical.

The status of this alarms stays major until reboot. A clear trap is not sent.

Corrective Action

Synchronize the timing module.

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.47 TM Reference Change

This alarm is only relevant for the Mediant 3000 Gateway.

TM Reference Change

Description The Timing Manager sends a log message upon PLL Status change

SNMP Alarm

acTMReferenceChange

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.58

Alarm Tit le [Event] TM Reference Change

Alarm Source

Alarm Type Other


Severity indeterminate

Addi tional Info

Corrective Action

7/23/2019 LTRT-32105 Mediant 3000




4.3.48 V5.2 Interface Alarm

This alarm is only relevant for the Mediant 3000 8410 Gateway.

V5.2 Interface Alarm

Description A V5.2 Interface alarm is raised in one of the following cases. Fordetailed V5.2 Interface condition, refer to the V5.2 Interfaces status table.

An Alarm is raised with critical severity when:

V5 interfaces ID are not equal on both sides

V5 variants are not equal on both sides

V5 link ID check timeout error occurred

Layer 2 startup failed

V5 restart failed

An Alarm is raised with major severity when: Control protocol data link error

Link control protocol data link error

BCC protocol data link error

PSTN protocol data link error

Protection DL1 failure

Protection DL2 failure

SNMP Alarm

acV52InterfaceAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.60 Alarm Tit le V5.2 Interface Alarm.

Alarm Source V5.2IF#


Probable Cause Communications Protocol Error

Severity Critical, Major, Clear

Addi tional Info

Corrective Action

For critical severity alarms, solve configuration mismatch (configurationdoes not comply to far end configuration).

For major severity alarms:

Ensure physical connections are in place.

Ensure links are not administratively blocked.

Resolve configuration issues.

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.49 IPv6

IPv6 Alarm

Description When an IPv6 Address already exists or there was a IPv6 configurationfailure, IPv6 is disabled.

SNMP Alarm

acIPv6ErrorAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.53

Alarm Tit le IPv6 Error

Alarm Source system#<n>\ ipInterface#<n>

Alarm Type operationalViolation

Probable Cause communicationsProtocolErrorSeverity Critical

Addi tional Info Status stays critical until reboot. A clear trap is not sent.

Corrective Action Find a new IPV6 address and reboot.

4.3.50 SONET Path STS LOP Alarm

Applies to Mediant 3000 6310 GWs.

SONET Path STS LOP Alarm

Description This alarm is issued when the LOP condition is present on the SONETPath #m.

SNMP Alarm acSonetPathSTSLOPAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.61

Alarm Tit le SONET Path STS LOP Alarm

Alarm Source Interfaces#0/Path#<m>



Severity Critical / clear

Addi tional Info

Corrective Action Correct the SONET mapping on either side ( the Gateway and the farend).

7/23/2019 LTRT-32105 Mediant 3000




4.3.51 SONET Path STS AIS Alarm


SONET Path STS AIS Alarm

Description This alarm is issued when the AIS condition is present on the SONETPath #m.

SNMP Alarm acSonetPathSTSAISAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.62

Alarm Tit le SONET Path STS AIS Alarm



Probable Cause receiveFailureSeverity Critical / clear

Addi tional Info

Corrective Action Check the following and correct according to the appropriate reason:

There is higher level failure: LOS, LOF, AIS-L

A Path Trace Identifier mismatch occurred

• Path is unequipped on the Far-End

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.52 SONET Path STS RDI Alarm


SONET Path STS RDI Alarm

Description This alarm is issued when the RDI condition is present on the SONETPath #m.

SNMP Alarm acSonetPathSTSRDIAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.63

Alarm Tit le SONET Path STS RDI Alarm



Probable Cause transmitFailureSeverity Critical / Cleared

Addi tional Info

Corrective Action This indication only reflects a failure detected on the far-end.

Check the following and correct on the far-end according to theappropriate reason:

LOS, LOF, AIS-L, AIS-P

4.3.53 SONET Path Unequipped AlarmApplies to Mediant 3000 6310 GWs.

Table -: SONET Path Unequipped Alarm

Description This alarm is issued when the Unequipped condition is present on theSONET Path #m.

SNMP Alarm acSonetPathUnequippedAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.64

Alarm Tit le SONET Path Unequipped Alarm




Severity Critical / clear

Addi tional Info

Corrective Action Equip the path on the far-end

7/23/2019 LTRT-32105 Mediant 3000




4.3.54 SONET Path Signal Label Alarm


Table -: SONET Path Signal Label Alarm

Description This alarm is issued when the Signal Label condition is present on theSONET Path #m.

SNMP Alarm acSonetPathSignalLabelMismatchAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.65

Alarm Tit le SONET Path Signal Label Alarm



Probable Cause receiveFailureSeverity Critical / clear

Addi tional Info

Corrective Action Set the transmit path signal label on the far-end to either "VT StructuredSTS1 SPE" (02) or "Asynchronous Mapping DS3" (04).

4.3.55 DS3 RAI Alarm


Table -: DS3 RAI Alarm

Description This alarm is issued when the RAI condition is present on the DS3Interface #m.

SNMP Alarm acDS3RAIAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.66

Alarm Tit le DS3 RAI Alarm

Alarm Source Interfaces#0/DS3#<m>


Probable Cause transmitFailure

Severity Critical / Cleared

Addi tional Info

Corrective Action This indication only reflects a failure detected on the far-end.

Check the following and correct on the far-end according to theappropriate reason:

LOS, LOF, AIS-L, AIS-P, DS3 LOS, DS3 LOF, DS3 AIS

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.56 DS3 AIS Alarm


Table -: DS3 AIS Alarm

Description This alarm is issued when the AIS condition is present on the DS3Interface #m.

SNMP Alarm acDS3AISAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.67

Alarm Tit le DS3 AIS Alarm



Probable Cause receiveFailureSeverity Critical / Cleared

Addi tional Info

Corrective Action Check the following and correct according to the appropriate reason:

There is a SONET level failure: LOS, LOF, AIS-L, AIS-P, UNEQ-P, TIM-P

The far-end (e.g., MUX) sends a DS3 AIS

4.3.57 DS3 LOF AlarmApplies to Mediant 3000 6310 GWs.

Table -: DS3 LOF Alarm

Description This alarm is issued when the LOF condition is present on the DS3Interface #m.

SNMP Alarm acDS3LOFAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.68

Alarm Tit le DS3 LOF Alarm




Severity Critical / Cleared

Addi tional Info

Corrective Action Check and correct the DS3 framing

7/23/2019 LTRT-32105 Mediant 3000




4.3.58 DS3 LOS Alarm


Table -: DS3 LOS Alarm

Description This alarm is issued when the LOF condition is present on the DS3Interface #m.

SNMP Alarm acDS3LOSAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.69

Alarm Tit le DS3 LOS Alarm



Probable Cause lossOfFrameSeverity Critical / Cleared

Addi tional Info

Corrective Action Check the cable connections or cable length

4.3.59 Software Upgrade Alarm

This alarm is relevant for M3K HA system.

Table -: Softw are Upgrade Alarm

Description This alarm is generated when the SW upgrade failure occurs.

SNMP Alarm acSWUpgradeAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.70

Alarm Tit le Software Upgrade Alarm

Alarm Source System#0


Probable Cause softwareProgramError

Severity Major

Addi tional Info

Corrective Action Start up system from BootP/TFTP.

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.60 NTP Server Status Alarm

Table -: NTP Server Status Alarm

Description This alarm issues when there is no initial communication with NTPServer (major severity) or when previously existing connection is lost(minor severity).

SNMP Alarm acNTPServerStatusAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.71

Alarm Tit le NTP Server Status Alarm

Alarm Source


Probable Cause communicationsSubsystemFailure

Severity Major / Minor / Clear

Addi tional Info

Corrective Action Check the NTP Server configuration parameters and / or fixcommunication with NTP Server.

4.3.61 SS7 Alias PC State Change Alarm

Description This alarm is raised when the Alias PC is in BUSY state. It is Cleared when it is inin-SERVICE state.

SNMP Alarm acSS7AliasPcStateChangeAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.73

Alarm Tit le SS7 Alias PC State Change Alarm

Alarm Source



Severity Major / Clear Addi tional Info

Corrective Action

7/23/2019 LTRT-32105 Mediant 3000




4.3.62 SS7 UAL Group State Change Alarm

Description Raised when the Ual Group ASP state is not ACTIVE. Cleared when

it is Active.

SNMP Alarm acSS7UalGroupStateChangeAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.74

Alarm Tit le SS7 Ual Group State Change Alarm

Alarm Source




Addi tional Info

Corrective Action

4.3.63 SSH Connection Status

SSH Connection Status

Description This trap indicates the result of a recent SSH connection attempt.

SNMP Alarm acSSHConnectionStatus

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.77

Alarm Tit le SSH Connection Status

Alarm Source

Alarm Type environmentalAlarm

Probable Cause unauthorizedAccessAttempt/other

Severity indeterminate

Addi tional Info

Corrective Action

7/23/2019 LTRT-32105 Mediant 3000



Mediant 3000

4.3.64 LDAP Lost Connection

Description This alarm is raised when there is no connection to the LDAP server.

SNMP Alarm acLDAPLostConnection

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.75

Alarm Title LDAP Lost Connection

Alarm Source


ProbableCause

communicationsSubsystemFailure

Severity Minor / Clear

Addi tionalInfo

CorrectiveAction

4.3.65 OCSP Server Status Alarm

OCSP Server Status Alarm

Description This alarm is raised when the OCSP connection is not available.

SNMP Alarm acOCSPServerStatusAlarm

SNMP OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.78

Alarm Tit le OCSP server alarm.


Probable Cause communicationsSubsystemFailure


Addi tional Info

Corrective Action

7/23/2019 LTRT-32105 Mediant 3000



Reader’s Notes

LTRT-32105 Mediant 3000

Documents

Transcript of LTRT-32105 Mediant 3000