Low Noise PVC Pipes
-
Upload
riyas-udheen -
Category
Documents
-
view
70 -
download
3
description
Transcript of Low Noise PVC Pipes
PVC PARTS ANDACCESORIES
INDEX
NUEVA TERRAIN, Spain´s market leader in PVC and Polybylene (PB) parts
and accessories, is pleased to present its general PVC-U catalogue, to
facilitate the work of professional in this sector, by providing
them with complete, detailed and precise information.
NUEVA TERRAIN would like to take this opportunity to thank all those
who have shown their confidence in us by using our products, and to
reiterate our wish to continue offering top quality, high performance
products.
Pipes6
PVC Fittings for drains10
White Series19
Ventilation Series22
Rainwater Series24
Waste traps, Bottle traps and Outlets27
Fittings, Tools and Spares35
Terrain SDP System37
General conditions43
Certificates40
Some of our exclusive parts4
Pipes, PVC Fittingsand accessories
Some of ourexclusive parts
5
CROSS-VENT CONNECTORThis special fittings is part of the secondary ventilation diameter 50 and 63 for connection to assembled soilpipes diameter 110 mm. According to some Technical Building Codes it is necessary to have secondaryventilation in buildings with 7 or more plants.The design reduces the space between the assembled soil pipes and ventilation, optimizes air flow, facilitatesthe assembly and improves the reliability of the set.
Some of our exclusive parts
90º BOSS CONNECTORSThese grafts allow to connect the small evacuation to a pipeline - collector of a simple and trustworthy way,supporting a slope of 2.2 % to assure the flow.
SPECIAL BOSS CONNECTOR FOR ASSEMBLED SOIL PIPESTheese boss connectors have similar characteristics to those above, and are speciallydesigned for connection to assembled soil pipes.
ACCESS DOORSThis access dor is designed with special characteristics. It has the advantage that it canbe coupled from the outside without the inner part coming off withing the pipe. It may
be fitted duringinstallation work or whenever an obstruction occurs.
ELBOW WITH ACCESS DOORThis exclusive NUEVA TERRAIN elbow is fitted with an access door providing access tothe interior of installations in two direccitions. Moreorver, if it is fitted as a branch in asoil pipes, the configuration of the access door gives extra protection against thepossibility of impact from falling objects.
PRE -FAB FITTINGNueva Terrain has a department of manufacture of fittings manipulated of evacuation that goes attending to the special needs of the market over 40 years in thesector in the sector. Along with the vast catalog available of injected fittings, Nueva Terrain additionally offers individualized professional solutions to solve thedifferent situations in work demand and whose production on the part of our service of prefabricated includes from the primary analysis of the need (planes, sketch..),toadvice on solving the problem and concludes with the design and manufacture of the fitting.These fittings, which are supplied on request, are elaborated by qualified personnel in a plant of specific production and are a fruit of the constant communicationof our extensive commercial network with the market and his needs throughout the years.
45º BOSS CONNECTORSBoss connectors specially designed to expire with the requirements of the Technical Code of the Building.Connect the small discharge directly to assembled soil pipes at an angle of 45 degrees.
Pipes
PVC PIPE FOR SEWAGE WATER- APPLICATION BREFERENCE EXTERIOR
DIAMETER mm.E PIPE
LENGTH m.COLOUR PIPE WEIGHT
Kgrs.
Produced according to UNE-EN 1.329-1 norm, resisting intermittent water discharges at 95ºC (test within
file Nº 12656 from Institute Eduardo Torroja)
GLUED JOINT
REFERENCE EXTERIORDIAMETER mm.
E PIPELENGTH m.
COLOUR
100.110.030
100.110.058
100.125.030
100.125.058
600.160.058
600.200.058
600.250.058
600.315.058
600.400.058
110
110
125
125
160
(3) 200
(3) 250
(3) 315
(3) 400
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
3,2
3,2
3,2
3,2
4,0
4,9
6,2
7,7
9,8
3,00
5,80
3,00
5,80
5,80
5,80
5,80
5,80
5,80
PIPE WEIGHTKgrs.
4,928
9,527
5,536
10,703
17,332
26,580
41,971
65,791
106,238
Produced according to thicknesses requested in the norm UNE-EN 1.401-1, for the application or not in UD
underground piping and used for drainage and evacuation. This series can be used for purposes of
application B.
PVC PIPE FOR DRAINAGE USE
ELASTIC SEAL JOINT
REFERENCE EXTERIORDIAMETER mm.
E PIPELENGTH m.
COLOUR
600.125.058.001
600.160.058.001
600.200.058.001
600.250.058.001
600.315.058.001
600.400.058.001
(3) 125
(3) 160
(3) 200
(3) 250
(3) 315
(3) 400
Orange (RAL 2010)
Orange (RAL 2010)
Orange (RAL 2010)
Orange (RAL 2010)
Orange (RAL 2010)
Orange (RAL 2010)
3,2
4,0
4,9
6,2
7,7
9,8
5,80
5,80
5,80
5,80
5,80
5,80
PIPE WEIGHTKgrs.10,703
16,919
26,580
41,971
65,791
106,238
7
D.N.
E
L2
D.N.
E
D.N.
E
200.032.030
200.032.058
200.032.058.010
200.040.030
200.040.058
200.040.058.010
200.050.030
200.050.058
200.050.058.010
100.083.030
100.083.058
100.110.030
100.110.058
100.125.030
100.125.058
100.160.030
100.160.058
100.200.058
100.250.058
100.315.058
32
32
(1) 32
40
40
(1) 40
50
50
(1) 50
(2) 83
(2) 83
110
110
125
125
160
*(3) 160
*(3) 200
*(3) 250
*(3) 315
Grey
Grey
White
Grey
Grey
White
Grey
Grey
White
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,0
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,2
3,9
4,9
6,2
3,00
5,80
5,80
3,00
5,80
5,80
3,00
5,80
5,80
3,00
5,80
3,00
5,80
3,00
5,80
3,00
5,80
5,80
5,80
5,80
1,23
2,38
2,38
1,57
3,04
3,04
2,00
3,86
3,86
3,60
6,96
4,93
9,53
5,54
10,70
7,24
14,00
21,25
33,28
52,63
* Useful length for diameters 200mm = 5.655m,250mm = 5.610m, 315mm = 5.570 m
(1) White sanitary colour(2) Out of norm(3) Male- Female
PVC RAINWATER PIPESREFERENCE EXTERIOR
DIAMETER mm.E PIPE
LENGTH m.COLOUR RAL
7003PIPE WEIGHT
Kgrs.
Produced according to norm UNE-EN 12.200-1
For raining water and tank discharges, useful for ventilation
NON-STANDARD PVC PIPES FORMVENTILATION OF COMMERCIAL PREMISES,WALL THROUGH-PIPES, LOST FRAMEWORK...REFERENCE EXTERIOR
DIAMETER mm.E PIPE
LENGTH m.COLOUR RAL
7003OR400.083.030
400.083.058
400.110.030
400.110.058
400.125.030
400.125.058
400.160.030
400.160.058
400.200.058
83
83
110
110
125
125
160
160
200
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
1,2
1,2
1,4
1,4
1,6
1,6
2,0
2,0
2,5
3,0
5,8
3,0
5,8
3,0
5,8
3,0
5,8
5,8
PIPE WEIGHTKgrs.1,407
2,718
2,180
4,214
2,831
5,472
4,530
8,757
13,683
Pipes are supplied with one end to be glued
PVC PIPES FOR PREASSUREREFERENCE EXTERIOR
DIAMETER mm.E PIPE
LENGTH m.COLOUR RAL
7003LORPIPE WEIGHT
Kgrs.500.075.004.058
500.090.004.058
500.110.004.058
500.125.004.058
500.140.004.058
500.160.004.058
500.180.004.058
500.200.004.058
500.250.004.058
500.315.004.058
500.400.004.058
75
90
110
125
140
160
180
200
250
315
400
Grey (RAL 7011)
Grey (RAL 7011)
Grey (RAL 7011)
Grey (RAL 7011)
Grey (RAL 7011)
Grey (RAL 7011)
Grey (RAL 7011)
Grey (RAL 7011)
Grey (RAL 7011)
Grey (RAL 7011)
Grey (RAL 7011)
1,8
1,8
2,2
2,5
2,8
3,2
3,6
4,0
4,9
6,2
7,9
5,8
5,8
5,8
5,8
5,8
5,8
5,8
5,8
5,8
5,8
5,8
3,775
4,551
6,704
8,644
10,820
13,996
17,642
21,758
33,274
52,631
85,268
8
(1) Diameter out of norm(2) White sanitary colour
D.N.
L2
E
D.N.
E
D.N.
L2
E
800.050.058
800.063.058
800.083.030
800.083.050
800.110.030
800.110.030.010
800.110.050
800.110.050.010
800.125.030
800.125.050
50
63
(1) 83
(1) 83
110
(2) 110
110
(2) 110
125
125
Grey
Grey
Grey
Grey
Grey
White
Grey
White
Grey
Grey
1,5
1,5
1,8
1,8
2,2
2,2
2,2
2,2
2,5
2,5
5,8
5,8
3,0
5,0
3,0
3,0
5,0
5,0
3,0
5,0
2,482
2,691
2,154
3,589
3,468
3,468
5,779
5,779
4,471
7,452
Pipes referred in this chapter fulfil requirements from UNE-EN 1452.
• Pipes are supplied with one end to be glued
• Total length of the pipes is 5.8 m
• For other diameters, length or higger pressure rates, please contact us for characteristics and prices.
PVC PIPES FOR USE UNDER PRESSURECOLOUR RAL 7011
REFERENCE EXTERIORDIAMETER mm.
THICKNESSmm.
L 2
500.040.006.058
500.050.006.058
500.063.006.058
500.075.006.058
500.090.006.058
40
50
63
75
90
46
56
65
77
80
1,50
1,50
1,90
2,20
2,70
PIPEWEIGHT
1,964
2,482
3,305
4,505
6,586
6 bar
500.110.006.058
500.125.006.058
500.140.006.058
500.160.006.058
500.180.006.058
500.200.006.058
500.250.006.058
500.315.006.058
500.400.006.058
110
125
140
160
180
200
250
315
400
3,20
3,70
4,10
4,70
5,30
5,90
7,30
9,20
11,70
9,527
12,467
15,407
20,170
25,580
31,579
48,691
74,713
124,080
90
100
110
125
135
145
190
230
270
7,5 bar
500.040.010.058
500.050.010.058
500.063.010.058
500.075.010.058
500.090.010.058
40
50
63
75
90
46
56
65
77
80
1,90
2,40
3,00
3,60
4,30
2,152
3,217
5,022
7,115
10,232
10 bar
500.025.010.058
500.032.010.058
500.110.010.058
500.125.010.058
500.140.010.058
500.160.010.058
500.180.010.058
500.200.010.058
25
32
110
125
140
160
180
200
1,50
1,90
5,30
6,00
6,70
7,70
8,60
9,60
1,011
1,552
15,289
19,641
24,463
32,108
40,341
49,926
31
35
90
100
110
125
135
145
12,5 bar
500.020.016.058
500.025.016.058
500.032.016.058
500.040.016.058
500.050.016.058
500.063.016.058
500.075.016.058
500.090.016.058
20
25
32
40
50
63
75
90
1,50
1,90
2,40
3,00
3,70
4,70
5,60
6,70
0,794
1,247
1,994
3,087
4,734
7,527
10,644
15,289
31
31
35
46
56
65
77
80
16 bar
500.110.016.058 110 90 8,10 22,717
20 bar
9
GENERAL INFORMATION: Only full length of pipes is supplied.
D.N.
L2
E
PVC parts for drains
ELBOWSREFERENCE DIAMETER
mm.WEIGHT ANGLE aCOLOUR TYPE OF
UNION
• High Impact Elbow
A B
ELBOW WITH ACCESS DOORREFERENCE DIAMETER
mm.WEIGHT ANGLE aCOLOUR TYPE OF
UNION103.110.092 110 Grey 714,2 92ºH-H
A
104,5
B
92,5
11
Produced according to UNE-EN 1.329-1 norm for B application,resisting intermittent water discharges at 95ºC (test within fileNº 12656 from Institute Eduardo Torroja)Colour: Grey (ral 7003)
Accessories certified by AENOR.* These fittings include rubber ring. All mouths of
series 100 and 200 can be jointed through rubber ringtough the adapting ring.
M-F ELBOWREFERENCE DIAMETER
mm.WEIGHT ANGLE aCOLOUR TYPE OF
UNIONA B
D.N.
B
A
D.N.
B
A
D.N.
B
A
D.N.
D.N. A
B
D.N.
D.N.
B
A
201.032.092
201.032.135
201.032.092.010
201.032.135.010
201.040.092
201.040.135
201.040.092.010
201.040.135.010
201.050.092
201.050.092.010
201.050.135
101.083.092 •
101.083.135
101.110.092 •
101.110.092.010
101.110.135
101.110.135.010
1.101.110.135
1.101.125.092 •
1.101.125.135
101.160.092 •
101.160.135
6.101.200.092 •
6.101.200.135
6.101.250.092 •
6.101.250.135 •
32
32
32
32
40
40
40
40
50
50
50
83
83
110
110
110
110
110
* 125
* 125
160
160
* 200
* 200
* 250
* 250
48,9
45,8
49,0
45,2
74,6
54,6
75,6
55,8
110,1
110,1
86,9
359,6
236,9
532,0
520,0
353,8
353,8
465,0
919,2
585,9
1405,0
827,8
2510,0
1581,0
4055,0
3185,0
92º
135º
92º
135º
92º
135º
92º
135º
92º
92º
135º
92º
135º
92º
92º
135º
135º
135º
92º
135º
92º
135º
92º
135º
92º
135º
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
M-H
M-H
M-H
M-H
25,0
15,0
25,0
15,0
39,0
11,0
39,0
11,0
41,5
41,5
17,0
94,0
25,5
107,0
107,0
30,0
30,0
24,0
146,0
40,0
187,5
44,5
190,0
58,0
146,0
79,0
25,0
15,0
21,0
15,0
39,0
11,0
39,0
11,0
41,5
41,5
17,0
94,0
25,5
100,0
100,0
30,0
30,0
24,0
149,0
40,0
193,0
44,5
204,0
60,0
148,0
71,0
Grey
Grey
White
White
Grey
Grey
White
White
Grey
White
Grey
Grey
Grey
Grey
White
Grey
White
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
M-H
M-H
M-H
M-H
M-H
M-H
M-H
M-H
M-H
M-H
M-H
M-H
63,0
48,0
-
68,0
300,0
527,6
286,0
286,0
410,0
244,9
426,8
561,0
Grey
Grey
Grey
Grey
Grey
Grey
Grey
White
Grey
Grey
Grey
Grey
40
40
50
50
83
110
110
110
110
110
* 125
160
207.040.092
207.040.135
207.050.092
207.050.135
107.083.092
107.110.092
107.110.135
107.110.135.010
1.107.110.135
107.110.158
1.107.125.158
107.160.158
92º
135º
92º
135º
92º
92º
135º
135º
135º
158º
158º
158º
27,5
36,0
42,0
42,0
105,0
141,0
54,0
54,0
78,0
52,5
78,0
78,0
27,0
14,0
35,0
16,0
41,0
56,0
30,6
30,6
24,0
13,6
14,0
18,0
DOUBLE BRANCHREFERENCE DIAMETER
mm.WEIGHT ANGLECOLOUR TYPE OF
UNIONA CB
12
Accessories certified by AENOR.* These fittings include rubber ring. All mouths of series 100 and 200 can
be jointed through rubber ring tough the adapting ring.
D.N.
A
B
C
D.N.
A
B
C
206.040.135
206.040.135.010
206.050.092
206.050.135
106.083.092
106.083.135
106.110.092
106.110.092.010
106.110.135
1.106.125.110.092
1.106.125.135
106.160.110.092
106.160.110.135
40
40
50
50
83
83
110
110
110
* 125x110
* 125
160x110
160x110
Grey
White
Grey
Grey
Grey
Grey
Grey
White
Grey
Grey
Grey
Grey
Grey
144,00
144,00
188,00
208,33
623,00
614,00
927,00
927,00
900,00
1246,85
1548,20
1077,70
1480,00
135º
135º
92º
135º
92º
135º
92º
92º
135º
92º
135º
92º
135º
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
53,0
53,0
41,5
65,0
88,0
108,0
101,5
101,5
135,0
112,5
162,0
89,0
173,0
14,0
14,0
44,0
17,0
70,0
19,0
104,0
104,0
26,0
101,0
45,0
60,0
163,5
53,0
53,0
26,0
62,0
35,0
101,5
45,0
45,0
136,5
58,0
162,0
61,0
163,5
SINGLE BRANCHREFERENCE DIAMETER
mm.WEIGHT ANGLECOLOUR TYPE OF
UNIONA CB
• High Impact Simple Branch
D.N.
A
B
C
D.N.
B
CA
32
32x40
32
40
40
40
40
50
50
50
83
83
110
110
110
110
110
* 125x110
* 125
* 125
160x110
160x110
160
160
* 200x110
* 200x125
* 200
* 200
Grey
Grey
White
Grey
Grey
White
White
Grey
White
Grey
Grey
Grey
Grey
White
Grey
White
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
79,0
88,0
79,0
99,3
114,9
99,5
116,0
153,7
153,7
168,5
495,0
474,0
708,8
708,8
784,0
784,0
935,0
1003,1
1287,2
1214,5
1019,2
1260,0
1324,0
1756,0
2365,0
2436,0
2830,0
4120,0
135º
135º
135º
92º
135º
92º
135º
92º
92º
135º
92º
135º
92º
92º
135º
135º
92º
92º
92º
135º
92º
135º
92º
135º
135º
135º
92º
135º
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
M-H
M-H
M-H
M-H
44,5
44,5
44,5
35,0
53,0
35,0
53,0
41,5
41,5
65,0
88,0
108,0
101,5
101,5
136,5
136,5
139,0
112,5
138,0
162,0
89,0
173,0
94,0
201,0
204,0
218,0
117,0
258,5
11,5
7,5
11,5
35,0
14,0
35,0
14,0
44,0
44,0
17,0
70,0
19,0
104,0
104,0
26,0
26,0
34,0
101,0
129,0
45,0
60,0
163,5
89,0
36,0
70,5
70,5
115,0
70,5
44,5
44,5
44,5
20,0
53,0
20,0
53,0
26,0
26,0
62,0
35,0
101,5
45,0
45,0
136,5
136,5
139,0
58,0
57,0
162,0
61,0
96,5
94,0
201,0
259,0
259,0
117,0
258,5
204.032.135
204.032.040.135
204.032.135.010
204.040.092
204.040.135
204.040.092.010
204.040.135.010
204.050.092
204.050.092.010
204.050.135
104.083.092
104.083.135
104.110.092
104.110.092.010
104.110.135
104.110.135.010
1.104.110.135
1.104.125.110.092
1.104.125.092
1.104.125.135
104.160.110.092
104.160.110.135
104.160.092
104.160.135
6.104.200.110.135
6.104.200.125.135
6.104.200.092 •
6.104.200.135 •
SQUARE DOUBLE BRANCHREFERENCE DIAMETER
mm.WEIGHT ANGLECOLOUR TYPE OF
UNIONA C
102.110.092 110 Grey 745,00 92ºH-H 104,0 104,0
B
45,0
D
29,5
13
Accessories certified by AENOR.* These fittings include rubber ring. All mouths of series 100 and 200 can
be jointed through rubber ring tough the adapting ring.
ADAPTING RINGREFERENCE DIAMETER
mm.WEIGHTCOLOUR
809.110
809.110.010
110
110
Grey
White
26,0
26,0
D.N.
D.N.
A
D
B
C
D.N.
A
D.N.
A
SEAL RING ADAPTER FOR RAINWATER ANDVENTILATION COUPLINGSREFERENCE DIAMETER
mm.WEIGHTCOLOUR A
32
32
40
40
50
63
83
110
110
160
Grey
White
Grey
White
Grey
Grey
Grey
Grey
White
Grey
15,8
15,8
21,6
21,6
25,6
40,8
84,0
85,0
85,0
183,0
10,0
10,0
11,0
11,0
11,0
11,5
21,0
21,0
21,0
25,0
209.032
209.032.010
209.040
209.040.010
209.050
209.063
109.083
109.110
109.110.010
109.160
STRAIGHT COUPLINGREFERENCE DIAMETER
mm.WEIGHTCOLOUR ATYPE OF
UNION32
32
40
40
50
63
83
110
110
* 125
160
* 200
* 250
Grey
White
Grey
White
Grey
Grey
Grey
Grey
White
Grey
Grey
Grey
Grey
30,7
30,7
46,4
46,4
56,7
81,0
179,8
243,6
243,6
485,9
554,4
1316,4
2820,0
5,0
5,0
8,0
8,0
4,0
3,0
6,5
6,5
6,5
23,5
8,0
12,5
2,5
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
210.032
210.032.010
210.040
210.040.010
210.050
210.063
110.083
110.110
110.110.010
1.110.125
110.160
1.811.200
6.110.250
STRAIGHT COUPLING FOR RAINWATER ANDVENTILATION PIPESREFERENCE DIAMETER
mm.WEIGHTCOLOUR A
110
110
Grey
White
193,0
193,0
3,0
3,0
TYPE OFUNION
H-H
H-H
810.110
810.110.010
D.N.
D.N.
A
14
* These fittings include rubber ring. All mouths of series 100 and 200 can bejointed through rubber ring tough the adapting ring
COUPLING FOR WASTE CONNECTIONSREFERENCE DIAMETER
mm.WEIGHTCOLOUR A
110x50x40 Grey 1015,4 75,0
TYPE OFUNION
H-H9.232.123.110
B
77,0
D.N.
d.n.D.N.
A
D.N.
A
d.n.
d.n.
B
C
D.N.
D.N.
d.n.B
C
A
BOSS CONNECTOR COUPLINGREFERENCE DIAMETER
mm.WEIGHT ACOLOUR TYPE OF
UNIONB D
116.110.050.040
116.110.050
110x50x40
110x50
Grey
Grey
500,0
545,0
90º
90º
H-H
M-H
86,0
159,0
86,0
114,0
C
78,5
103,5
A
D.N.
STRAIGHT COUPLING FOR RAINWATER ANDREFERENCE DIAMETER
mm.WEIGHTCOLOUR ATYPE OF
UNION* 32
* 40
* 50
* 63
* 83
* 110
* 110
* 125
* 160
* 200
Grey
Grey
Grey
Grey
Grey
Grey
White
Grey
Grey
Grey
61,5
84,3
103,9
156,5
346,6
368,0
368,0
421,8
899,3
1289,9
70,0
82,5
82,5
98,0
149,5
149,5
149,5
163,0
210,0
216,0
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
211.032
211.040
211.050
211.063
111.083
1.111.110
1.111.110.010
1.111.125
111.160
1.816.200
D.N.
A
BOSS CONNECTOR COUPLINGREFERENCE DIAMETER
mm.WEIGHTCOLOUR ATYPE OF
UNION670.040
670.050
670.063
670.083
670.110
670.125
670.160
670.200
670.250
40
50
63
83
110
125
160
200
250
Red
Red
Red
Red
Red
Red
Red
Red
Red
160,0
-
-
370,0
385,0
620,0
775,0
1075,0
4880,0
-
-
-
47,0
47,0
47,0
47,0
62,0
-
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
H-H
FIRE COLLARREFERENCE DIAMETER
mm.WEIGHTCOLOUR ATYPE OF
UNION671.083
671.110
671.125
671.160
83
110
125
160
Red
Red
Red
Red
280,0
185,0
340,0
620.0
-
-
-
-
H-H
H-H
H-H
H-H
SOCKET PLUGREFERENCE NOMINAL DIAMETER
D.N. X d.n.WEIGHTCOLOUR A
83
110
Grey
Grey
106,0
136,0
51,0
51,0
TYPE OFUNION
M-H
M-H
130.083
130.110
ANGLEa-
-
15
D.N.
A
STRAIGHT BOSS ADAPTOR FOR BRANCHREFERENCE NOMINAL DIAMETER
D.N. X d.n.WEIGHTCOLOUR A
40
50
Grey
Grey
53
58
-
-
TYPE OFUNION
H
H
115.040
115.050
ANGLEa
-
-
D.N.
SELF LOCKING BOSSREFERENCE NOMINAL DIAMETER
D.N. X d.n.WEIGHTCOLOUR A
110x40
110x50
Grey
Grey
133,6
159,0
110,0
110,0
TYPE OFUNION
H
H
122.110.040
121.110.050
ANGLEa
92º
92º
A
D.N.d.n.
45º BOSS CONNECTORREFERENCE NOMINAL DIAMETER
D.N. X d.n.WEIGHTCOLOUR A
110x40
110x50
Grey
Grey
100,0
141,7
-
-
TYPE OFUNION
H
H
112.110.040.135
112.110.050.135
ANGLEa45º
45º
BOSS CONNECTORREFERENCE NOMINAL DIAMETER
D.N. X d.n.WEIGHTCOLOUR A
83x32
83x40
110x32
110x40
110x50
125x40
125x50
160x40
160x50
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
60,0
84,2
61,0
80,0
110,0
80,0
118,0
73,0
108,0
69,0
69,0
79,0
82,0
89,0
88,0
95,0
105,0
109,0
TYPE OFUNION
H
H
H
H
H
H
H
H
H
112.083.032
112.083.040
112.110.032
112.110.040
112.110.050
112.125.040
112.125.050
112.160.040
112.160.050
ANGLEa92º
92º
92º
92º
92º
92º
92º
92º
92º
d.n. D.N.
A
BOSS CONNECTOR WITH RUBBER RING
d.n. D.N.
A
REFERENCE NOMINAL DIAMETERD.N. X d.n.
WEIGHTCOLOUR ATYPE OFUNION
ANGLEa
110x40
110x50
125x40
125x50
160x40
160x50
Grey
Grey
Grey
Grey
Grey
Grey
95
14O
92
135
91
124
95,0
105,0
100,0
110,0
120,0
123,0
H
H
H
H
H
H
113.110.040
113.110.050
113.125.040
113.125.050
113.160.040
113.160.050
92º
92º
92º
92º
92º
92º
SOCKET REDUCERREFERENCE NOMINAL DIAMETER
D.N. X d.n.WEIGHT(grs.)
COLOUR ATYPE OFUNION
MODEL B
WC CONNECTOR **REFERENCE NOMINAL DIAMETER
D.N. X d.n.WEIGHT(grs.)
COLOUR ATYPE OFUNION
ANGLEa
B
110
110
110
White
White
White
339,0
539,0
386,0
69,0
69,0
69,0
H-H
H-H
H-H
125.110.110
125.110.092.110
125.110.163.110
-
92º
163º
51,0
51,0
51,0
WC CONNECTOR **REFERENCE NOMINAL DIAMETER D.N.
X d.n.WEIGHT(grs.)
COLOUR ATYPE OFUNION
83
83
83
83
110
110
110
110
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
306,0
424,0
602,0
957,0
373,0
535,0
778,0
1264,0
150,0
250,0
400,0
700,0
150,0
250,0
400,0
700,0
M-H
M-H
M-H
M-H
M-H
M-H
M-H
M-H
126.083.015
126.083.025
126.083.040
126.083.070
126.110.015.110
126.110.025.110
126.110.040.110
126.110.070.110
POST - FORMED SOCKET CONNECTOR F-FREFERENCE NOMINAL DIAMETER D.N.
X d.n.WEIGHT(grs.)
COLOUR BTYPE OFUNION
A C
** 110 Grey 726,0 360H-H127.110.110 150 51
16
Accessories certified by AENOR.* These fittings include rubber ring. All mouths of series 100 and 200 can be jointed through rubber ring tough the adapting ring.** Supplied with rubber ring for adaptation. References: 9.148.110 or 9.149.110 or 9.150.075
A
D.N.
D.N.
B
A
C
D.N.
B C
D
A
d.n.
BD.N.
A
B
D.N.
A
d.n.
D.N.
A
d.n.
D.N.
A
B
C
B
A
D.N.
A
B
C
40x32
50x32
50x40
63x50
83x50
110x50
110x83
125x110
160x110
160x125
200x110
200x125
200x160
200x110
200x160
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
Grey
17,4
35,0
31,8
57,3
93,1
148,4
140,0
233,0
290,0
342,0
500,0
1021,0
940,0
460,0
492,0
26,0
31,0
31,0
36,0
50,0
51,0
51,0
75,5
76,0
76,0
196,0
187,6
146,9
63,0
37,0
M-H
M-H
M-H
M-H
M-H
M-H
M-H
M-H
M-H
H-H
M-H
M-H
M-H
M-H
M-H
224.040.032
224.050.032
224.050.040
224.063.050
124.083.050
124.110.050
124.110.083
124.125.110
124.160.110
124.160.125
124.200.110
1.124.200.125
124.200.160
123.200.110
123.200.160
B
B
B
B
B
B
B
B
B
B
C
C
C
A
A
-
5,5
-
-
12,5
26,5
11,0
3,0
21,5
14,5
43,0
35,8
18,0
-
-
17
Accessories certified by AENOR.
BOSS ENTRY M-FREFERENCE NOMINAL DIAMETER
D.N. X d.n.WEIGHT(grs.)
COLOUR TYPE OFUNION
A
110x50x40 Grey 156,28 M-H129.110.050.040 50,4
d.n. d.n.D.N.
A
WEATHERING APRONREFERENCE NOMINAL DIAMETER
D.N. X d.n.WEIGHT(grs.)
COLOUR ATYPE OFUNION
B
83
110
160
Grey
Grey
Grey
74,0
98,0
235,0
38,0
38,0
51,0
H
H
H
131.083
131.110
131.160
102,0
130,0
180,0
B
D.N.
A
ACCESS DOORREFERENCE NOMINAL DIAMETER
D.N. X d.n.WEIGHT(grs.)
COLOUR
135.083
135.110
135.160
83
110
160
Grey
Grey
Grey
127,0
371,0
333,0
A B
114,0
154,0
155,0
82,5
109,0
110,0
A
B
ACCESS CAPREFERENCE NOMINAL DIAMETER
D.N. X d.n.WEIGHT(grs.)
COLOUR ATYPE OFUNION
40
50
83
110
125
160
Grey
Grey
Grey
Grey
Grey
Grey
41,0
63,5
124,5
187,3
348,0
511,0
14,5
14,5
28,0
28,0
21,0
44,0
M
M
H
H
H
H
237.040
237.050
136.083
136.110
1.136.125
136.160
D.N.
A
P-TRAPREFERENCE NOMINAL DIAMETER
D.N. X d.n.WEIGHT(grs.)
COLOUR ATYPE OFUNION
B
110 Grey 1000,0 304,0H149.110.135 285,0
45°
A
B
18
BUILD-IN HOLDERBATREFERENCE D. NOMINAL
D.N. X d.n.THICKNESS MATERIALCOLOUR WEIGHT A B
141.083
141.110
141.125
141.160
141.200
641.200.001
83
110
125
160
200
200
-
-
-
-
-
-
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
236,0
338,0
338,0
676,0
285,0
628,0
75,5
89,5
96,5
115,0
-
124,0
140,5
140,5
140,5
163,0
-
167,0
A
B
SOUND PROOF PIPE CLIP FORTHREADED BAR M-8REFERENCE D. NOMINAL
D.N. X d.n.THICKNESS MATERIALCOLOUR WEIGHT
A
D.N.
CLIP FOR M-8 THREADED RODREFERENCE D. NOMINAL
D.N. X d.n.THICKNESS MATERIALCOLOUR WEIGHT A
D.N.
A
SCREW TO WALL HOLDERBATREFERENCE D. NOMINAL
D.N. X d.n.THICKNESS MATERIALCOLOUR WEIGHT A B
240.032
240.032.010
240.040
240.040.010
240.050
140.083
140.110
140.125
140.160
640.200.001
640.250.002
640.315.002
32
32
40
40
50
83
110
125
160
200
250
315
Grey
White
Grey
White
Grey
-
-
-
-
-
-
-
3,2
3,2
3,2
3,2
3,2
2,0
2,5
2,5
2,5
3,5
3,0
3,2
PVC
PVC
PVC
PVC
PVC
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
16,0
16,0
17,0
17,0
22,0
196,0
268,0
268,0
225,0
565,0
1650,0
1900,0
36,0
36,0
36,0
36,0
40,5
75,5
89,5
96,5
115,0
135,0
155,0
187,0
55,0
55,0
65,0
65,0
80,0
144,0
174,0
172,0
225,0
102,0
220,0
250,0
BD.N.
A
B
D.N.
A
642.050.008
642.063.008
642.083.008
642.110.008
642.125.008
642.160.008
642.200.008
642.250.008
642.315.008
-
-
-
-
-
-
-
-
-
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
108,0
-
132,0
148,0
150,0
260,0
282,0
352,0
424,0
45,0
-
55,0
77,0
85,0
102,0
122,0
147,0
180,0
50
63
83
110
125
160
200
250
315
32
40
50
63
83
125
160
200
250
315
-
-
-
-
-
-
-
-
-
-
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
INS 643.032.008
INS 643.040.008
INS 643.050.008
INS 643.063.008
INS 643.083.008
INS 643.125.008
INS 643.160.008
INS 643.200.008
INS 643.250.008
INS 643.315.008
-
96,0
104,0
-
166,1
275,0
419,0
479,0
430,0
530,0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
White Series
20
ELBOWREFERENCE DIAMETER
mm.WEIGHT ANGLETYPE OF
UNIONA B
SINGLE BRANCHREFERENCE DIAMETER
mm.WEIGHT ANGLETYPE OF
UNIONA CB
SEAL RING ADAPTER FOR RAINWATERAND VENTILATION COUPLINGREFERENCE DIAMETER
mm.WEIGHT
809.110.010 110 26,0
ADAPTING RINGREFERENCE DIAMETER
mm.WEIGHT A
209.032.010
209.040.010
109.110.010
32
40
110
15,8
21,6
85,0
10,0
11,0
21,0
SCREW TO WALL HOLDERBATREFERENCE DIAMETER
mm.THICKNESS MATERIALWEIGHT A B
240.032.010
240.040.010
32
40
3,2
3,2
PVC
PVC
16,0
17,0
36,0
36,0
55,0
65,0
D.N.
B
A
D.N.
B
A
D.N.
B
CA
D.N.
A
B
C
D.N.
D.N.
A
D.N.
A
B
C
B
D.N.
A
D.N.
A
DOUBLE BRANCHREFERENCE DIAMETER
mm.WEIGHT ANGLETYPE OF
UNIONA B
206.040.135.010
106.110.092.010
40
110
53,0
53,0
144,0
927,0
135º
92º
H-H
H-H
55,0
65,0
32
40
40
50
110
110
79,0
99,5
116,0
153,7
708,8
784,0
135º
92º
135º
92º
92º
135º
H-H
H-H
H-H
H-H
H-H
H-H
44,5
35,0
53,0
41,0
101,5
136,5
11,5
35,0
14,0
44,0
104,0
26,0
44,5
20,0
53,0
26,0
45,0
-
204.032.135.010
204.040.092.010
204.040.135.010
204.050.092.010
104.110.092.010
104.110.135.010
201.032.092.010
201.032.135.010
201.040.092.010
201.040.135.010
201.050.092.010
101.110.092.010
101.110.135.010
107.110.135.010
32
32
40
40
50
110
110
110
49,0
45,2
75,6
55,8
110,1
520,0
353,8
286,0
92º
135º
92º
135º
92º
92º
135º
135º
H-H
H-H
H-H
H-H
H-H
H-H
H-H
M-H
25,0
15,0
39,0
11,0
41,5
107,0
30,0
90,0
21,0
15,0
39,0
11,0
41,5
100,0
30,0
24,0
21
STRAIGHT COUPLINGREFERENCE D.NOMINAL
D.N.WEIGHT A
32
40
110
30,7
46,4
243,6
5,0
8,0
6,5
TYPEOF UNION
H-H
H-H
H-H
210.032.010
210.040.010
110.110.010
STRAIGHT COUPLING FOR RAINWATERAND VENTILATION PIPESREFERENCE D.NOMINAL
D.N.WEIGHT A
110 193,0 3,0
TYPEOF UNION
H-H810.110.010
SLIP COUPLINGREFERENCE D.NOMINAL
D.N.WEIGHT A
* 110 368,0 149,5
TYPEOF UNION
H-H1.111.110.010
M-F STRAIGHT COUPLINGREFERENCE D.NOMINAL
D.N.319.040 40
THICKNESS TYPE OFUNION
A
3 M-H59 53,0
WEIGHT
M-F STRAIGHT COUPLINGREFERENCE D. NOMINAL
D.N.THICKNESS TYPE OF
UNIONWEIGHT A
341.032
341.040
341.050
32
40
50
H
H
H
42,0
46,0
64,0
36,0
36,0
36,0
2,5
2,5
2,5
ADAPTER COUPLINGWITH THREADED MOUTHREFERENCE D. NOMINAL
D.N.THICKNESS TYPE OF
UNIONWEIGHT A B
350.032.125
350.040.125
350.040.150
32-1 1/4"
40-1 1/4"
40-1 1/2"
H
H
H
21,8
35,7
38,3
53,0
57,5
57,5
24,0
38,5
38,5
2,5
2,5
2,5
D.N.
A
A
D.N.
D.N.
D.N.
A
A
D.N.
D.N.
D.N.
BA
A
D.N.
Ventilation Series
CROSS-VENT CONNECTORREFERENCE D.NOMINAL
D.N. x d.n.WEIGHT ANGLECOLOUR TYPE OF
UNIONA CB
CROSS VENT CONNECTOR PIPE CLIPREFERENCE D.NOMINAL
D.N. x d.n.WEIGHTCOLOUR A
148.110.050 110x50 Grey 81,0 98,5
VENT COWLREFERENCE D.NOMINAL
D.N. x d.n.WEIGHTCOLOUR TYPE
OF UNION150.083
150.110
150.160
83
110
160
Grey
Grey
Grey
56,0
95,0
170,0
H
H
H
VENT COWL WITH VALVEREFERENCE D.NOMINAL
D.N. x d.n.WEIGHTCOLOUR A
151.040
151.110
40
110
White
Grey
74,0
575,0
65,0
130,0
23
D.N. d.n.
A
B
C
A
d.n.
D.N.
D.N.
A
D.N.
108.110.050
108.110.063
110x50
110x63
Grey
Grey
582,6
725,8
135º
135º
H-H
H-H
98,5
105,0
70,0
102,0
76,5
93,0
Rainwater Series
FLAT SUMP COVER FOR ROOFS, GARAGES,TERRACES, ETC. HIGH IMPACTREFERENCE D.NOMINAL
D.N.WEIGHT
grs.ACOLOUR TYPE OF
UNIONB C minC max D
870.110
870.125
870.160
870.200
110
125
160
200
Grey
Grey
Grey
Grey
4270,0
4644,0
4302,0
3810,0
149,0
133,0
133,0
104,0
H
H
H
H
300,0
300,0
300,0
300,0
20,0
20,0
20,0
20,0
53,0
53,0
53,0
53,0
236,5
236,5
236,5
236,5
SUMP COVER WITH HOOD FOR ROOFS,TERRACES, ETC. HIGH IMPACTREFERENCE D.NOMINAL
D.N.WEIGHT
grs.ACOLOUR TYPE OF
UNIONB C minC max D
871.110
871.125
871.160
871.200
110
125
160
200
Grey
Grey
Grey
Grey
3886,0
4260,0
3918,0
3426,0
149,0
133,0
133,0
104,0
H
H
H
H
300,0
300,0
300,0
300,0
20,0
20,0
20,0
20,0
53,0
53,0
53,0
53,0
236,5
236,5
236,5
236,5
BOTTLE TRAP WITH SUMP COVER FOR ROOFS,GARAGES, ETC.REFERENCE D.NOMINAL
D.N.WEIGHT
grs.A
minCOLOUR TYPE OF
UNIONB C
minC
maxD
872.050
872.083
50
83
Grey
Grey
1770,0
1649,0
205,0
205,0
H
H
152,0
152,0
29,0
29,0
70,0
70,0
117,0
117,0
Amax
no limit
no limit
BOTTLE TRAP HOOD FOR ROOFS, TERRACES,ETC. HIGH IMPACTREFERENCE D.NOMINAL
D.N.WEIGHT
grs.A
minCOLOUR TYPE OF
UNIONB C
minC
maxD
873.110 * 110 Grey 260,0 210,0H 300,0 20,053,0 210,0
Amax
no limit
25
BOTTOM PART OF ACCESSED SUMP WITHHORIZONTAL OUTLETREFERENCE D.NOMINAL
D.N.WEIGHT
grs.COLOUR TYPE OF
UNION872.050.030 50 Grey 260,0 H
A
74,0
BOTTLE TRAP WITH SUMP COVER FOR ROOFS,GARAGES, ETC. HIGH IMPACTREFERENCE D.NOMINAL
D.N.WEIGHT
grs.A
minCOLOUR TYPE OF
UNIONB C
minC
maxD
872.110 * 110 Grey 5188,0 210,0H 300,0 20,053,0 210,0
Amax
no limit
* It includes Ø200 and 132mm pipe with adapting length.
C
B
DD.N.
A
B
C
D D.N.
A
D
d.n.D.N.
A
C
B
D.N. A
D D.N.
A
C
B
DD.N.
B
A
C
Waste outlets and trapsWaste outlets and traps
SMALL WASTE OUTLET WITH PLUG(FOR STAINLESS STEEL SINKS)
REFERENCE D. NOMINAL D.N. X d.n.
THICKNESS TYPE OFUNION
COLOUR ANGLE A B
310.040 40 White H154,0 85,0 33,02,5
TEES AND ELBOWSREF. D.NOM.
D.N.WEIGHT A
minCOLOUR TYPE OF
UNIONB
máxCB
minD
304.040.092 40 White 260,0 176,5M-H 141,5 70,0110,5 29,0
Amáx
478,0
ANGLETHICKNESS
2,5 91 1/4º
WASTE OUTLET WITH PLUG (FOR WASH BASINS AND BIDETS)
REFERENCE D. NOMINAL D.N. X d.n.
THICKNESS TYPE OFUNION
COLOUR ANGLE A
309.032
309.040
32
40
White
White
M
M
145,0
152,0
142
130
2,5
2,5
WASTE OUTLET WITH PLUG(FOR WASH BASINS, BIDETS AND SINKS)
REFERENCE D. NOMINAL D.N. X d.n.
THICKNESS TYPE OFUNION
COLOUR WEIGHT A B
311.032
311.040
311.050
32
40
50
White
White
White
H
H
H
145,0
147,0
167,5
72,5
72,5
76,5
33,0
33,0
33,0
2,5
2,5
2,5
27
Washbasins
D.N.
A
B
A
B
D.N.
D.N.
A
D.N. = =A
D.N.D
CB
Sinks and Washtubs
28
WASTE OUTLET AND BOTTLE TRAP WITH PLUG(FOR WASH BASINS AND BIDETS)
REFERENCE D. NOMINAL D.N. X d.n.
THICKNESS TYPE OFUNION
COLOUR WEIGHT A Bmáx
Bmín
372.032.114
372.040.114
372.032.001.114
372.040.001.114
32
40
32
40
White
White
White
White
H
H
H
H
267,0
293,0
264,0
282,0
55,0
55,0
55,0
55,0
116,0
103,0
116,0
103,0
2,5
2,5
2,5
2,5
27,0
18,5
27,0
18,5
WASTE OUTLET ELBOWREFERENCE D. NOMINAL
D.N. X d.n.THICKNESS TYPE OF
UNIONCOLOUR WEIGHT A B
máxB
mín
359.040.092 40 White H65,0 91 1/4º 70,02,5 200,0
ADAPTER COUPLING FOR NUT JOINTSREFERENCE D. NOMINAL
D.N.THICKNESS TYPE OF
UNIONCOLOUR WEIGHT A
341.032
341.040
341.050
32
40
50
White
White
White
H
H
H
42,0
46,0
64,0
36,0
36,0
36,0
2,5
2,5
2,5
ADAPTER COUPLING WITH THREADED MOUTHREFERENCE D. NOMINAL
D.N.THICKNESS TYPE OF
UNIONCOLOUR WEIGHT A B
350.032.125
350.040.125
350.040.150
32-1 1/4"
40-1 1/4"
40-1 1/2"
White
White
White
H
H
H
21,8
35,7
38,3
53,0
57,5
57,5
24,0
38,5
38,5
2,5
2,5
2,5
VALVE AND BALL TRAP WITH PLUG(FOR WASH BASINS AND BIDETS)
REFERENCE D. NOMINAL D.N. X d.n.
THICKNESS TYPE OFUNION
COLOUR WEIGHT A Bmáx
Bmín
382.040.065 40 White H316,0 65,0 103,02,5 18,5
D.N.
A
B
D.N.
A
B
D.N.
BA
A
D.N.
D.N.
A
B
Showers
29
WASTE OUTLET BENDREFERENCE NOMINAL
D.N.THICKNESSCOLOUR TYPE OF
UNIONANGLE BA C
313.040.092
313.050.092
40
50
2,5
2,5
H
H
131
134
91 1/4º
91 1/4º
36,0
41,0
75,0
72,0
47,5
56,0
White
White
WEIGHT
LARGE WASTE OUTLET BENDREFERENCE NOMINAL
D.N.THICKNESSCOLOUR TYPE OF
UNIONANGLE BA C
313.040.092.001
313.040.092.090
40
40
3
3
H
H
100
185
91 1/4º
91 1/4º
36,0
36,0
97,0
75,0
58,0
47,0
White
White
WEIGHT
LARGE WASTE OUTLETREFERENCE NOMINAL
D.N.THICKNESSCOLOUR TYPE OF
UNIONANGLE A B
313.040.001
313.040.001.090
40
40
3
3
H
H
148
155
0
0
85,0
85,0
33,0
33,0
White
White
WEIGHT
Showers
D.N.
B
A
A
D.N.
B
C
D.N.
A
B
C
30
WASTE OUTLET WITH OVERFLOW PIPEAND PLUG (for baths, hip-baths, etc..)
REFERENCE DIAMETERmm.
THICKNESSCOLOUR TYPE OFUNION
ANGLEa
A B
312.050 50 3 H225 0 73,5 33,0White
WEIGHT
WASTE OUTLET WITH OVERFLOW PIPEAND PLUG (for baths, hip-baths, etc..)
REFERENCE DIAMETERmm.
THICKNESSCOLOUR TYPE OFUNION
ANGLEa
BA C
314.040.092
314.050.092
40
50
3
3
H
H
229
238
91 1/4º
91 1/4º
36,0
41,0
75,0
75,0
47,5
52,0
White
White
WEIGHT
WASTE OUTLET WITH OVERFLOW PIPEAND PLUG (for baths, hip-baths, etc..)
REFERENCE DIAMETERmm.
THICKNESSCOLOUR TYPE OFUNION
ANGLEa
A B
318.040.125 40 3 H226 0 72,5 33,0White
WEIGHT
M-F STRAIGHT COUPLINGREFERENCE DIAMETER
mm.THICKNESSCOLOUR TYPE OF
UNIONBA C
319.040 40 3 M-H59 53,0 0,0White
WEIGHT
OVERFLOW (for baths, hip-baths, etc..)
REFERENCE DIAMETERmm.
THICKNESSCOLOUR A B
387.029 29 3 115 82,0 80,0White and Chromium plated
WEIGHT
Baths
D.N.
B
A
D.N.
A
B
A
D.N.
D.N.
D.N.
A
B
D.N.
B
A
C
31
BOTTLE TRAPREFERENCE DIAMETER
mm.THICKNESSCOLOUR TYPE OF
UNIONBA C
372.040 40 2,5 H141 148,055,0 0,0White
WEIGHT
TUBULAR “'P”' TRAPREFERENCE DIAMETER
mm.THICKNESS TYPE OF
UNIONCOLOUR WEIGHT A B
máxB
mín
380.032
380.040
380.050
32
40
50
White
White
White
M-H
M-H
M-H
85
116
167
55,0
55,0
55,0
181,5
180,0
212,0
2,5
2,5
2,5
78,0
80,0
95,0
P-TRAP WITH VENTILATIONMEMBRANE VALVE FOR SKINS AND BIDETS
REFERENCE DIAMETERmm.
THICKNESSCOLOUR TYPE OFUNION
BA C
380.040.151 40 2,5 M-H164 180,055,0 80,0White
WEIGHT
TUBULAR “'S”' TRAPREFERENCE DIAMETER
mm.THICKNESSCOLOUR TYPE OF
UNIONBA C
381.032
381.040
32
40
2,5
2,5
M-H
M-H
100,8
145,6
181,5
180,0
55,0
55,0
78,0
80,0
White
White
WEIGHT
BALL TRAPREFERENCE DIAMETER
mm.THICKNESSCOLOUR A B
382.040.065.010 40 2,5 164 65,0 158,0White
WEIGHT TYPE OFUNION
H
Traps
D.N.
A B
D.N.
D.N.
BA
D.N.
D.N.
A
B
D.N.
D.N.B
A
D.N.
A
D.N.
B
32
For correct installation of siphon traps with lidsink, you must place the corresponding pipe Ø32to get the necessary water seal.
BLANK COVER AND STAINLESS STEEL FRAMEREFERENCE DIAMETER
mm.WEIGHTCOLOUR
110
125
160
110
125
160
Grey
Grey
Grey
Grey
Grey
Grey
347,5
377,6
531,5
282,5
312,5
466,5
120,0
120,0
120,0
-
-
-
Amáx
57,0
57,0
57,0
57,0
57,0
57,0
404.110.001
404.125.001
404.160.001
404.110
404.125
404.160
Amín
B
5,0
5,0
5,0
1,0
1,0
1,0
SUMP COVER AND STAINLESS STEEL FRAMEREFERENCE DIAMETER
mm.WEIGHTCOLOUR
110
125
160
110
125
160
Grey
Grey
Grey
Grey
Grey
Grey
376,5
406,5
560,5
311,5
341,5
495,5
120,0
120,0
120,0
-
-
-
Amáx
57,0
57,0
57,0
57,0
57,0
57,0
405.110.001
405.125.001
405.160.001
405.110
405.125
405.160
Amín
B
5,0
5,0
5,0
1,0
1,0
1,0
STAINLESS STEEL BLANK COVERREFERENCE DIAMETER
mm.WEIGHTCOLOUR
110 Grey 241,0
A
130,0406.110
SQUARE SUMP COVER WITH STAINLESS STEELCOATINGREFERENCE DIAMETER
mm.WEIGHTCOLOUR
110 Grey 589,0
A
91,0407.110
B
150,0
STAINLESS STEEL SUMP COVERREFERENCE DIAMETER
mm.WEIGHTCOLOUR
110 Grey 487,0
A
93,0408.110
B
152,0
Integrated parts for bottle traps
D.N.
B
A
D.N.
B
A
D.N.
Ø A
D.N.
A
B
D.N.
A
B
33
BOTTOM PART OF BOTTLE TRAPREFERENCE DIAMETER
mm.WEIGHTCOLOUR
110
125
160
Grey
Grey
Grey
113,0
119,0
284,0
9.207.110
9.207.125
9.207.160
BOTTOM PART Ø110 TO 6 MOUTH OF Ø40REFERENCE DIAMETER
mm.WEIGHTCOLOUR
110 x 40 Grey 400,09.227.110.040
BODY AND BOTTOM PART OF BOTTLE TRAPWITH SWIVELS MOUTHREFERENCE DIAMETER
mm.WEIGHTCOLOUR
110 x 50 x 40
110 x 50 x 40
Grey
Grey
460,0
420,0
9.232.110
9.233.110
DENOMINATION
High part of the body of the bottle trap with swivels mouth.
Prolonged concentric reducer of bottle trap for adjustable outlets.
FOUR OUTLET BOTTLE TRAP WITH ACCESS DOORREFERENCE DIAMETER
mm.WEIGHTCOLOUR
Grey
Grey
732,5
661,5
A
106
106
9.235.110.050
9.235.110.083
B
55
55
110 x 50 x 40
110 x 50 x 40
EIGHT OUTLET BOTTLE TRAP WITH FOUR PLUGSREFERENCE DIAMETER
mm.WEIGHTCOLOUR
Grey 400,0
A
559.237.110.004 110 x 50 x 40
Components for bottle traps
D.N.
D.N.
d.n.
A
B
d.n.D.N.
D.N.
d.n.
D.N.
BA
D.N.
d.n. d.n.
A
34
COMPONENTS FOR BOTTLE TRAPSREFERENCE DENOMINATION
Bottle trap body of Ø110 with outlet to Ø50
Prolonged concentric reducer of bottle trap for adjustable outlets
Rubber grab ring for body ref. 9232
Rubber grab ring for body ref. 9232
Plug for Ø40 outlet
Plug for Ø50 outlet
Boss coupling for hydraulic seal for lower bottle trap outlets than Ø50
Boss for hydraulic seal for lower bottle trap outlets than Ø50
Straight coupling for hydraulic seal Ø50
Sweep bend male-female bottle trap house connection Ø40
Sump body
116.110.050
224.050.040.001
9.234.040
9.234.050
9.215.040
9.228.040
9.229.050
9.229.050.090
9.230.050
9.231.040.090
9.804.110
COMPONENTS FOR TRAPSREFERENCE DENOMINATION
Accessed sump with horizontal outlet equal diameter.
Flot sump cover for references 870.110, 870.125, 870.160, 870.200 871.110, 871.125, 871.160, 871.200 y 872.110
Hood sump for references 871.110, 871.125, 871.160, 871.200 y 873.110
Main body for references 870.110, 870.125, 870.160, 870.200, 871.110, 871.125, 871.160, 871.200, 872.110 y 873.110
Closing cap for references 872.110 y 873.110
Lower body for references 872.110 y 873.110
Jointed sump ring for references 870.110, 870.125, 870.160, 870.200, 871.110, 871.125, 871.160, 871.200, 872.110 y 873.110
Square enclosure sump cover for references 870.110, 870.125, 870.160, 870.200, 871.110, 871.125, 871.160, 871.200, 872.110 y 873.110
872.050.030
9.801
9.802
9.804
9.805
9.806
9.810
9.811
Fittings, Tools and Spares
36
LIQUIDSREFERENCE DESCRIPTION
Soldering liquid for PVC 500 cc pressure system
Soldering liquid for PVC 500 cc drainage system
Soldering liquid for PVC 125 cc drainage system
Cleaning fluid 500 cc
Lubricant for fitting adapter ring
9.101
9.102
9.102.003
9.103
9.137
TOOLSREFERENCE DESCRIPTION
Hole cutter Ø65 mm for boss connectors Ø 50 mm with mandrel
Hole cutter Ø40 mm for boss connectors Ø 32 mm with mandrel
Hole cutter Ø50 mm for boss connectors Ø40 mm with mandrel
Hole cutter Ø33.5 mm for large six-mouthed swivel bottle traps (without drill bit)
90º Toggle bolt
Toggle bolt
135º Toggle bolt
9.105
9.106
9.109
9.113
9.114
9.115
9.115.135
GRILLESREFERENCE DESCRIPTION
Stainless steel grill. Ø70 for references 313.040.092 y 313.050.092.
Stainless steel grill. Ø83 for references 313.040.001 y 313.040.092.001.
Brass Grille Ø70 for references 311.050, 312.050, 314.040.092 y 314.050.092.
Brass Grille Ø70 for references 310.040, 311.032, 311.040, 318.040.125, 372.032.114, 372.040.114, 372.032.001.114, 372.040.001.114 y 382.040.065.
Grid support flange reference 383.040.050
ABS grille for references 383.040.050.
stainless steel sink grid for references 408.110
Sump aluminum grill level garages, etc ... references 870.110, 870.125, 870.160, 870.200 y 872.110.
346.125.017
346.150.017
347.050.014
347.040.024
383.040.050.005
383.040.050.006
9.219.110.001
9.801.001
METAL JOINTING SLEEVESREFERENCE DESCRIPTION
Metal sleeve Ø32
Metal sleeve Ø40
Metal sleeve Ø50
245.032
245.040
245.050
ROSETTESREFERENCE DESCRIPTION
9.181.001
9.182.001
9.183.001
White rosette Ø 32 mm
White rosette Ø40 mm
White rosette Ø 50 mm
CHAINS FOR WASTE OUTLETSREFERENCE DESCRIPTION
Chain for washbasins and bidets
Chains for baths and hip-bath
9.158
9.159
BARSREFERENCE DESCRIPTION
Threaded bar for pipe clip (Ref. 642 y 643...) M-8x1000mm. With zinc80.081.000
The SDP Terrain System
The TERRAIN SDP system has the largest number of parts
to meet the needs of a wide range of drainage projects. The
TERRAIN SDP system is based on well-designed and
exclusive joining and assembly methods.
PROPERTIES OF PVC PIPES
PVC (po lyv inych lo r ide ) p ipes o f fe r par t i cu la r
advantagescompared with those manufactured from traditional
materials. In general they have the following characteristics
detailed below.
They are: Inert, odorless, tasteless, corrosion-proof,
non-toxic and unaffected by the action of hostile soils,
including soils with a high chalk content or areas subject to
the seepage of dangerous substances.
• Insoluble and lightweight, considerably lighter than
aluminum, facilitating transport and assembly.
• Resistant to the majority of chemical agents, such as
alkalis, oils, detergents, etc., Nevertheless in applications
designed for the transport of these agents, check their
behavior in the “Resistance to chemical agents” table.
• Low friction factor: The pipe walls may be considered
hydraulically smooth and offer minimal resistance to the
flow of liquids, resulting in much lower frictional losses than
in the case of traditional pipes.
• Do not conduct electricity: They are unaffected by
underground currents.
• Prevent build up of scale, thus keeping their profile
constant as long as slopes are applied appropriately.
• Low elastic modulus values, achieving low celerity rates,
thus reducing the excess pressures caused by the water
hammer effect, in comparison with the other materials.
• High dilatation constants. As with other plastic materials,
PVC has a high thermal elevation coefficient, thus it is
necessary for movements produced by variations in
temperature to be neutralized by using the expansion joints
included in the system of parts when and where appropriate,
such as at fixing points or brackets.
• Long-Lasting: Lifetime of over 50 years, with a residual
safety coefficient on reaching this age.
Falta Range of Applications.
OPERATING CONDITIONS
TERRAIN SDP pipes conform to the corresponding UNE
standards and are designed for use under the following
conditions:
• PVC pressurised pipes.
Work pressures correspond to the nominal pressure marked
on the pipe to a temperature 20 º -25 º C, according to UNE
EN 1452.
• PVC soil and waste pipes.
Application R according to UNE-EN 12200-1 for rainwater
drainage and ventilation. Application B according to BS EN
1329-1 standards for the disposal of waste water and hot
domestic use from washing machines, dishwashers, etc.,
In which, even when the temperature can be high, the
volume of water to evacuate is small and therefore the time
that the pipe is subject to these conditions is short, without
producing a softening of it. It should not be used in
installations whose drain is of long duration at elevated
temperatures, for example in industrial laundries.
• PVC piping for underground horizontal drainage.
These installations, supports a maximum working pressure
of two ATMs., Although this line will be oversized in thickness
to withstand the external loads that weigh on them. The
wall thickness corresponds to a PVC pressure pipe 5 ATMs.,
Manufactured to BS EN 1401-1 standards.
38
TYPES OF CONNECTIONThe TERRAIN SDP system is designed for use with either
ofthe following systems, i.e., flexible seals or soldered
joints.This makes robust and stable installations possible with
a minimum use of parts. This system is also more economicalon
account of the speed with which they can be fitted
andsubsequent labor savings. This can be improved yet further
in large residential blocks with the use of our pre-assembly
techniques applied in out workshops or on site.
PIPE MARKINGThe pipes are marked in accordance with the corresponding
UNE standards, specifying:
• Trade Mark: SDP.• Nominal dimensions: Diameter and thickness.• For pressure pipes: Nominal pressure.• For waste pipes: Series B and R.• Applicable UNE standard.
• Material: PVC.• Month, Year and Line of fabrication.
PRESENTATION AND SUPPLYPVC pipes are supplied in the following lengths:
Pressure pipes: 5,80 m.
Waste, rainwater and ventilation pipes : 3,00 –
5,00 – 5,80 m.
ORDERINGPlease state the catalogue reference number (part number)
in the order, as well as the quantity.
DIMENSION AND WEIGHTUnless otherwise indicated in part drawings, their main
dimensions will be specified in milimeters and grams.
ASSEMBLY INSTRUCTIONSIn order for an installation to meet its design requirements
itis necessary to follow the assembly instructions given in
“NUEVA TERRAIN assembly instructions”.
COLORSThe colors in which each component are available are shown
with each one. Drain pipes and theirs accessories are normally
supplied in grey. Some other accessories are also available
in white. PVC drain pipes and accessories are usually supplied
in white polypropylene.
READY-MADE UNITSPrices for prefabricated units will be quoted by request to
your local representative or directly to NUEVA TERRAIN.
STORAGE AND HANDLINGAll pipes and accessories are manufactured to high standardsof
finish, permitting their installation without further paintingor
covering. Under no circumstances should unprotectedpackages
of pipes be left in the open air or in unventilatedspaces.
Exposure to sunlight can cause a rise in temperatureof
unprotected material, which in extreme cases may resultin
deformations. Pipes should be stored in a covered place,on
a flat surface on uniformly supported shelving.
SPECIALISED APPLICACTIONSThe TERRAIN SDP system is the most appropriate waste
anddrainage system of any kind of dwelling of one or more
storeys. For other kinds of industrial uses or chemical plants
in which the waste is especially aggressive or contaminating,
the technical department of NUEVA TERRAIN should be
consulted.
39
Certificates
General Conditions
GUARANTEEOur guarantee solely and exclusively covers the replacement of the defective
material or part once the client has carried out the tests required by the
regulations and the defect has been reviewed and accepted by our technical
department. Any incorrect handling or use other than that for the purpose
for which it was designed automatically voids the guarantee.
DISCLAIMERWe reserve the right to make any type of modification to the design and
dimensions in our products without prior notice.
JURISDICTIONTo resolve disputes which may arise from the application of these standards,
NUEVA TERRAIN, S.L. and the customer agree to be bound to the courts
and tribunals of Vitoria, renouncing all other applicable codes of law.
• TERRAIN SDP and SDP are registered brands of NUEVA TERRAIN S.L.
• NUEVA TERRAIN. We reserve the right to change the characteristics of our parts and accessories without prior notice.
• Total or partial publication of this catalogue is prohibited without the prior written consent of NUEVA TERRAIN.
• This catalogue is subject to modifications without prior notice and has
no contractual value. The data provided is given in good faith. We are
not responsible for the consequence of any use made of this data.
43
26/3
000/
FEB
201
1/S
CG
NUEVA TERRAIN S.L.
Pol. Ind. JundizC/ Paduleta nº 201015 VITORIA - ÁLAVA (ESPAÑA)Tel. 945 14 11 88 - Fax 945 14 33 36E-mail: [email protected]://www.nuevaterrain.com