Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto...
-
Upload
ferdinand-boone -
Category
Documents
-
view
228 -
download
1
Transcript of Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto...
![Page 1: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/1.jpg)
Low Frequency Seismic noise in seismic
attenuationproblems (and solutions)
LIGO-G1000533 Kyoto GWADW 2010, May2010
Riccardo De Salvo
![Page 2: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/2.jpg)
Introduction (established facts)
• It is well established that dislocations are at the base of dissipation in metals
• Dislocations dissipate by drifting with delay under oscillating stress and forming arches
• More dislocations / cm3 => More dissipation
A. Granato, et al., “Theory of mechanical damping due to dislocations”, Jour. Of Appl. Phys., vol 27, n 6, p583-593, 1956
![Page 3: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/3.jpg)
• At equal density of dislocation per cm3 longer free segments move more, span over larger areas and generate more dissipation
• Anchoring points of any kind reduce the average free lengthand the dissipation.
• Dissipation ~l4
Nowick A S and Berry B S Anelastic Relaxation in Crystalline Solids, (New York: Academic) 1972
![Page 4: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/4.jpg)
• Movement of dislocations generate Yield• Young’s modulus drops in presence of
dislocations > 20% observed• The material yield more for same stress field
with longer free length dislocation• • Modulus defect ~l2
Nowick A S and Berry B S Anelastic Relaxation in Crystalline Solids, (New York: Academic) 1972
![Page 5: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/5.jpg)
• Dislocations carry deformation.• Moving dislocations deform the flexure• Metastable transport of dislocations
change the equilibrium point– Static hysteresis
Hysteresis
![Page 6: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/6.jpg)
• The free length of dislocation segments is reduced by pinning points, intentionally introduced in the metal grain
• Precipitates, carbon crystals, . . .
• Dislocations can pin other dislocations
( base of the invention ofwork hardening)
Material becomes less lossy, more elastic
![Page 7: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/7.jpg)
• Few- tens of nm typical distance between dislocations• Pinning points also spaced at tens of nm• But point-like
• Dislocations cross entire crystal (um)
• Can turn around a pinning point• Cannot turn around other dislocations
• Free length more likely limited by entanglement than pinning
![Page 8: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/8.jpg)
• Dislocations can move, but• Cannot cross each other (energetically forbidden)
• therefore will entangle and disentangle• If entanglement and disentanglement are permitted
• free length changes
•
•
![Page 9: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/9.jpg)
• Dislocations can move, but• Cannot cross each other (energetically forbidden)
• therefore will entangle and disentangle• If entanglement and disentanglement are permitted
• free length changes
• Young’s modulus unstable
•
![Page 10: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/10.jpg)
• Dislocations can move, but• Cannot cross each other (energetically forbidden)
• therefore will entangle and disentangle• If entanglement and disentanglement are permitted
• free length changes
• Young’s modulus unstable
• Equilibrium point unstable
![Page 11: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/11.jpg)
At low frequencyRestoring forces are weak
dynamic disentanglement can be expected to have dramatic effects !
![Page 12: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/12.jpg)
Theoretical => Experimental • Entangled dislocations act collectively• We observed a LF Dissipation Phase Transition • from “viscous”• To Self Organized Criticality mode (avalanches)
Predictions:• Excess LF and 1/f noise• Reduced attenuation power• .
Per Bak 1996How nature works: The Science of Self-Organized Criticality
![Page 13: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/13.jpg)
Self Organized Criticality (SOC)
![Page 14: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/14.jpg)
Observed problems in Mechanical oscillators
• Inconsistencies in Inverted Pendula and Geometric Anti Spring filters
• Hysteresis, Random walk of equilibrium point, even sudden Instability.
• Manifested only at lower frequency
![Page 15: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/15.jpg)
Hysteresis without actual movement
• Overnight lab thermal variations• No feedback, free movement• Thermal hysteresis of equilibrium
point
LVD
T [m
m]
Temperature [oC]
Note the Bumpy movement
We tried to impeding hysteresis By impeding movement
![Page 16: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/16.jpg)
Hysteresis without actual movement
• Overnight lab thermal variations• No feedback, free movement• Thermal hysteresis of equilibrium
point
• Position feedback on• No actual movement, expect no hysteresis • Hysteresis shifts to the control current ! !
LVD
T [m
m]
Actu
ator
forc
e [m
N]
Temperature [oC]Temperature [oC]
![Page 17: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/17.jpg)
Hysteresis == noise
Hysteresis does not originate from the macroscopic movement but from a microscopic stress dynamics inside the material!
Hysteresis advanced by bumps 1/f noise
1/f
![Page 18: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/18.jpg)
Changing Young’s modulus Instability
The filter abandons the equilibrium position slowly, then accelerates away
The time scale is of many seconds
The acceleration is “bumpy” due to individual avalanches
Avalanches propagate across the entire 38 cm blades
Some suddenly-activated mechanism occurs inside the blade
Saulson P et al 1994 Rev. Sci. Instrum. 65 182–91
![Page 19: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/19.jpg)
Low frequency instability 65 kg payload can fall indifferently up or down
NO CREEP,
NO GRAVITY DRIVEN EFFECT
It is the Young’sModulus thatSuddenly fails!
instability region mstarting from ~ 0.2 Hz
Low stress !
![Page 20: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/20.jpg)
To explore the effects of hysteresis at various frequencies
frequency 0.21 Hz (>0.2Hz) 113 N/m
We apply a force lifting the spring to a certain height, then cut the force and let the system oscillate freely:NO HYSTERESIS OBSERVED
Subjecting the system to the same force, butslowly returning the lifting force to zero, thus generating no oscillations:HYSTERESIS OBSERVED FOR ALTERNATE SIGN EXCITATIONNO HYSTERESIS FOR SAME SIGN EXCITATION
OSCILLATIONS APPEAR TO WASH-OUT HYSTERESIS
![Page 21: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/21.jpg)
Hysteresis grows much larger at lower frequency
frequency 0.15 Hz (<0.2Hz) 58 N/m
OSCILLATIONS APPEAR to be ineffective TO WASH-OUT HYSTERESIS at low frequency: not enough oscillations to delete hysteresis
Proposed explanation: below 0.2 Hz the restoring force is dominated by entangled dislocations.Under pulsed stresses dislocations mobilize and eventually re-entangle elsewhere generating a different equilibrium position.
![Page 22: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/22.jpg)
Hysteresis grows much larger at lower frequency
Residual elasticity from crystal
Change of equilibrium point from disentangled, re-entangled Network of dislocations
![Page 23: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/23.jpg)
Quality factor measurement
the expected behavior is quadratic if the losses are frequency independent
The deviation from quadratic was fit with an exponential function explained by interruption ofExponential growth of avalanches
![Page 24: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/24.jpg)
• Frequency deficit vs. oscillation amplitude
Young’s modulusDrops with oscillation amplitude
![Page 25: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/25.jpg)
• Analyzing ring-downs. • damping time growing for smaller oscillation amplitude• Proposed explanation: larger oscillations can disentangle more
dislocations, which then move freely and cause increased dissipation and shorter damping times.
Excess Dissipation at larger oscillation amplitude
![Page 26: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/26.jpg)
Experimentally foundStationary and Unexpected 1/f Transfer Function has been found
when the GAS filter was tuned at or below 100 mHz
Transfer function of a GAS-filter
The SAS seismic attenuation system for the Advanced LIGO Gravitational Wave Interferometric Detectors. A.Stochino et al., 2008
Fractal dynamics predicts 1/f noise
![Page 27: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/27.jpg)
• Virgo Inverted pendulum random walk– Virgo, LCGT (Takahashi talk)
• noise from stages above percolating into the LF performance– aLIGO multiple pendulum
hysteresis
• Noise in accelerometers
Does avalanching noise affect us
Hysteresis measured in the Advanced LIGO multiple pendulum
Hysteresis = avalanche noise!
![Page 28: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/28.jpg)
• Further reduce thermal fluctuations• Impede slow movements (tidal, etc.)
• Work at true equilibrium point (not one dislocation pattern induced)
• Periodically flatten the dislocation landscape with forced oscillations
The palliatives for Advanced LIGO
![Page 29: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/29.jpg)
New materials and processes need to be explored to design the seismic isolation of third generation, lower frequency GW interferometers
Glassy materials that do not contain dislocations or
polar compounds that do not allow dislocation movement
candidate materials for seismic attenuation filters and inertial sensors
Dislocation movement impede fragility we want to avoid their movement
=> fragility may be an unavoidable effect
Long term solutions?
![Page 30: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/30.jpg)
Need dislocation for ductility
But we need to stop dislocation avalanching
There is a better solution . . .Pin the dislocations, stop avalanching
(to be patented)
What is the best solution?
![Page 31: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/31.jpg)
![Page 32: Low Frequency Seismic noise in seismic attenuation problems (and solutions) LIGO-G1000533 Kyoto GWADW 2010, May2010 Riccardo De Salvo.](https://reader038.fdocuments.us/reader038/viewer/2022110101/56649ec15503460f94bcd252/html5/thumbnails/32.jpg)
• Entanglement and disentanglement is an intrinsically slow process
• Many dislocations must drift sequentially• Long time constants predicted• Avalanching is predicted• It can even be self triggering