Lovemae Teabag

1
25 mm 650 mm method ingredients (makes one tea bag) mae wrapping paper scissors staples ruler string (we used cooking string) white paper name tag 8. 15 mm 25 mm 10mm 5. 6. 7. 5mm centre double sided tape 5mm 1. 2. 3. 4. 10. to tea love 8. Download and print the Name Tag pdf using a ink jet printer or going to your local digital printer. Cut out the tag and fold in half. 9. Write on the tag and staple to the other end of string. Cut another piece of string, wrap and tie around the gift. Tie the tea bag to the string on the present. Voila! Note: Remind the gift receiver to empty the tea leaves into a tea strainer. (The taste of paper isn’t preferred in a cup of hot tea.) 5. Measure and make a small mark 15mm and 25mm on the top corners. See diagram (5.) Fill the tea bag with a delicious loose leaf tea. Fold the corners down using the marks just made. 6. Fold down the top edge 10mm from the top. 7. Measure and cut a piece of string 10cm long. Staple down the top with the string secured under the fold. 1. Place a sheet of Mae Wrapping Paper pattern side down. Measure and cut a 90mm x 150mm rectangle. Place a strip of double sided tape on the right edge. Make a small mark 5mm each side from the centre. Fold the left edge to the 5mm mark furthest away. Fold the right edge to the 5mm mark furthest away while sticking down the tape to secure the tea bag. 2. Flip over the tea bag. Bring the top edge to the bottom edge, folding the bag in half. Open up the tea bag and make a small mark 5mm each side of the centre. Fold the tea bag back in half. 3. Fold the bottom edge from the top layer on the mark just made. 4. Flip over the tea bag. Fold up the bottom edge on the other mark. Make and fill this lovely tea bag with delicious loose leaf tea and decorate your gifts. www.lovemae.com.au

description

making Teabag, origami, paper craft

Transcript of Lovemae Teabag

25 mm

650 mm

method

ingredients (makes one tea bag)

♥ mae wrapping paper ♥ scissors ♥ staples ♥ ruler ♥ string (we used cooking string) ♥ white paper

name tag

8.

15 mm

25 m

m

10m

m5. 6. 7.

5mmcentre

do

ub

le sid

ed

tap

e

5mm

1. 2. 3. 4.

10.

to

tea

love

8. Download and print the Name Tag pdf using a ink jet printer or going to your local digital printer. Cut out the tag and fold in half.

9. Write on the tag and staple to the other end of string. Cut another piece of string, wrap and tie around the gift.Tie the tea bag to the string on the present. Voila!

Note: Remind the gift receiver to empty the tea leaves into a tea strainer. (The taste of paper isn’t preferred in a cup of hot tea.)

5. Measure and make a small mark 15mm and 25mm on the top corners. See diagram (5.)Fill the tea bag with a delicious loose leaf tea.Fold the corners down using the marks just made.

6. Fold down the top edge 10mm from the top.

7. Measure and cut a piece of string 10cm long.Staple down the top with the string secured under the fold.

1. Place a sheet of Mae Wrapping Paper pattern side down.Measure and cut a 90mm x 150mm rectangle. Place a strip of double sided tape on the right edge.Make a small mark 5mm each side from the centre.Fold the left edge to the 5mm mark furthest away.Fold the right edge to the 5mm mark furthest away while sticking down the tape to secure the tea bag.

2. Flip over the tea bag. Bring the top edge to the bottom edge, folding the bag in half.Open up the tea bag and make a small mark 5mm each side of the centre.Fold the tea bag back in half.

3. Fold the bottom edge from the top layer on the mark just made.

4. Flip over the tea bag.Fold up the bottom edge on the other mark.

Make and fill this lovely tea bag with delicious

loose leaf tea and decorate your gifts.

www.lovemae.com.au