Long-term Corrosion Control for Jetty Piles & Marine Structures · Long-term Corrosion Control for...
Transcript of Long-term Corrosion Control for Jetty Piles & Marine Structures · Long-term Corrosion Control for...
Long-term Corrosion Control for Jetty Piles &
Marine Structures
80 YEARS OF CORROSION PREVENTION
MARINE PROTECTION SYSTEMS
2
Introduction: Denso SeaShield comprise a range of systems developed to protect marine structures where corrosion is a majorproblem in splash zones, inter-tidal and subsea environments. These areas are extremely vulnerable due to theconstantly changing mixture of air, temperature and chloride laden water, the perfect recipe for severe rusting. Oncecorrosion has begun, rough seas containing sand, shingle and debris coupled with infestations of marine growth, speedup the deterioration process. If nothing is done the structures can soon become unsafe and extremely costly to repair.
Why Use Denso SeaShield?
● Denso SeaShield systems have a 35 year proven track record for steel, wood and concrete jetty piles situated in highly corrosive environments including sub-sea conditions.
● Abrasive blast cleaning is notessential for steel surfaces as SeaShield systems are extremely surface tolerant and can be applied over chloride contamination and thin layers of rust.
Marine life forms such as barnacles and algae will soon colonise any structure.
Extremes of temperature, ice and heavy seas also take their toll on marine structures.
MARINE PROTECTION SYSTEMS
Important: SeaShield System SelectionTo ensure that the correct SeaShield system is selected for the appropriate project, a Questionnaire is available forcompletion from our website, subsidiary companies or world wide agents to ensure that all of the relevant criteria aretaken into consideration.
Need the SeaShield Questionnaire? Get it from www.densoaustralia.com.au or from one of our sales team on +61 3 93567600
● Cost effective long-term protection is achievable irrespective of cylindrical, hexagonal or square section structure designs.
Denso SeaShield Marine Protection Systems
3
Need expert help or advice? Visit our website www.densoaustralia.com.au or speak to one of our sales team on +61 3 93567600
Berthing Dolphinswith Tightly NestedPiles Situated Closeto Sea Level:
Overview of the RangeDenso SeaShield Systems
System Name System Type Description Page
SeaShield 2000 FD 6-7
SeaShield 500 Epoxy Grout 8-9and GRP Form Jackets
Fiber- Form Steel Rebar, Standard 9Grout and GRP Jackets
SeaShield 100 Petrolatum Inner Layer 10-11and HDPE Jacket
SeaShield 80 Petrolatum Inner Layer 11and Densopol 80 Tape
SeaShield Pile Cap GRP Cap and Expanding 12Marine Foam
A heavy duty system for the protection ofcylindrical, square and hexagonal steelconcrete or wood piles
A medium duty system for the protectionof cylindrical, square and hexagonal steelconcrete or wood piles
A light duty system for the protection ofcylindrical, square and hexagonal steelconcrete or wood piles
An extra heavy duty system for theprotection of steel, wood and concrete piles
An ultra heavy duty system for theprotection of reinforced concrete piles
In heavy seas, tremendous forces are created under these structures due tothe rise and fall of the swell/wave action. A combination system comprising Denso Rigspray and SeaShield 2000 FDhas been designed to provide long term protection in such stormyconditions. Please enquire for further details.
Petrolatum Inner Layerand HDPE Jacket
A heavy duty system for protecting thearea between the pile top and theunderside of the jetty deck
Denso SeaShield Marine Protection Systems
4
Need the SeaShield Questionnaire? Get it from www.densoaustralia.com.au or from one of our sales team on +61 3 93567600
SeaShield Systemsthat use the PetrolatumInner Layer:
● Denso SeaShieldSeries 2000 FD
(Note: This System only requiresDenso S105 Paste when surfacepitting exceeds 2mm in depth.)
● Denso SeaShieldSeries 80
● Denso SeaShield Series 100
Cleaning with a power tool.
Applying Denso Marine Piling Tape.
Cleaning using a high pressure water jet.
Tape application underwater.
Petrolatum Inner LayerDenso SeaShield Systems
The Petrolatum Inner Layer provides optimum corrosion control for the pile surface.
The use of surface tolerant petrolatum products for the inner layer means that the substrate needs only hand or power toolcleaning to remove loose rust, loose coating and marine growth.
High pressure water jetting can be used to speed up the cleaning process.
MARINE PROTECTION SYSTEMS
High pressure water jet under water.
Cleaning with a hand scraper.
Surface Preparation and Application of the Petrolatum Inner Layer:
Cleaned piles ready for the application of the Petrolatum Inner Layer.
Denso S105 Paste + Double Wrap of Denso Marine Piling Tape = Petrolatum Inner Layer
5
The Petrolatum InnerLayer Components:
Denso S105 PasteA VOC free, soft petrolatum pastethat contains water displacingadditives, corrosion inhibitorsand biocides.
Denso Marine Piling TapeA thick, heavy duty tape madefrom a non-woven synthetic fabricimpregnated and coated with apetrolatum compound containinginert fillers, water displacing agentsand wide spectrum biocides.
The tape has a HDPE backing film.It is also specially formulated forapplication under water, or to wetsurfaces. When applied spirallyunder tension it will displacewater and develop a waterresistant bond to metal surfaces.
Petrolatum Inner LayerDenso SeaShield Systems
Need expert help or advice? Visit our website www.densoaustralia.com.au or speak to one of our sales team on +61 3 93567600
Divers fitting a 2000 FD Jacket over the Petrolatum Inner Layer on a 1.3m diameter pile.
6
Petrolatum Inner Layer + HDPE Jacket + Marine Grade Fasteners = SeaShield Series 2000 FD
UsesSeaShield Series 2000 FD heavyduty system provides protection forsteel, concrete and timber structuresin the splash and intertidal zones.
Series 2000 FD can be used toencapsulate jetty piles, offshore riserpipes and exposed piping.
It can accommodate piles withcylindrical and hexagonal sectionsas well as support membersand bracings.
Description:A tough, ultraviolet-resistant jacketthat provides protection to the tapeinner layer against abrasion, waveaction and accidental impact. The jackets are secured with 316stainless steel fasteners.
The Fastening MethodThe jacket joint is drawn together using a specially developed pneumatic clamp, allowing for easy fastening of the 316stainless steel fasteners. The tension created by closing the jacket around the pile in this system is such that it pushes outany air between itself, the Petrolatum Inner Layer and the pile surface making it an exceptionally good seal between all ofthe system layers.
Suitable for vertical and raker piles withthese cross sections
Heavy Duty Outer LayerSeaShield Series 2000 FD
Cathodic protection systems are easily integrated into the SeaShield 2000 FD system. MARINE PROTECTION SYSTEMS
Need the SeaShield Questionnaire? Get it from www.densoaustralia.com.au or from one of our sales team on +61 3 93567600
7
Need expert help or advice? Visit our website www.densoaustralia.com.au or speak to one of our sales team on +61 3 93567600
Advantages:
● Proven long-term corrosion prevention
● Surface preparationwith mechanical and power tools or hp water jetting
● Can be applied to damp and immersed surfaces
● Easy and fast installation
● Increased hoop tension gives better adhesion
● One piece jackets
● Environmentally friendly
● Resistant to ice formation
Cross section showing the system on ahexagonal pile. The picture shows the innertape layer and outer jacket conformingtightly under pressure to the pile’s profile.
Petrolatum Inner Layer + HDPE Jacket + Marine Grade Fasteners = SeaShield Series 2000 FD
Heavy Duty Outer LayerSeaShield Series 2000 FD
8
GRP Form Jacket + 550 Epoxy Grout = SeaShield Series 500
Pumping the 550 Grout. Note the visiblerising level seen through the Form.
Advantages:
● Total encapsulation
● Easy to install
● Outstanding abrasion resistance
● Only requires inexpensive pumping equipment
● Optimum maintenance free service life
● Translucent GRP Forms enable internal grout level to be easily monitored
● UV resistant
● Meaningful long-term warranties available
Description and Uses:This robust, heavy duty Densoencapsulation system has beendesigned specifically for the repairand/or protection of coastal marinestructures with moderate corrosionnot requiring the addition of steelrebars. Jetty piles, bridge supports,offshore risers, conductors,pipework, jacket legs and structuralmember supports can all beprotected with it.
To overcome the difficulty ofworking in a tidal or splash zoneenvironment the systems can beapplied in a series of stages.
Heavy Duty Pile RestorationSeaShield Series 500
Series 500 comprises translucentGRP Forms which are securedaround the suitably cleanedsubstrate of the structure to beprotected. Working from thebottom upwards, SeaShield 550Epoxy Grout is then injected bypump, through special entry portsin the Forms until it completelyfills the internal space between theForm and the substrate. Whencured, the SeaShield 550 EpoxyGrout bonds exceptionally well tothe substrate and the Forms whichremain in place as a tough outerlayer giving additional impactand abrasion resistance.
GRP Forms are also available for Hsection piles.
Suitable for vertical and raker piles withthese cross sections
The Epoxy Grout only requires basicpumping equipment.
MARINE PROTECTION SYSTEMS
Need the SeaShield Questionnaire? Get it from www.densoaustralia.com.au or from one of our sales team on +61 3 93567600
9
Need expert help or advice? Visit our website www.densoaustralia.com.au or speak to one of our sales team on +61 3 93567600
GRP Forms stockpiled and readyfor installation.
Placing the standoffs around the steelrebars before fitting the Fiber-Forms.
GRP Form Jacket + 550 Epoxy Grout = SeaShield Series 500
SeaShield 500 Components:GRP Form Jacket:High quality glass reinforcedpolyester outer jacket.
Stand-offs:Non-corrosive grout spacers areused inside the jacket to maintainproper spacing around the pilingwhen pumping or pouring theEpoxy Grout.
SeaShield 550 Epoxy Grout:A three component waterdisplacing epoxy resin/aggregateformulation with excellentflowability for easy application.
Heavy Duty Pile RestorationSeaShield Series 500
SeaShield 500 system still intact after withstanding a severe battering from this uprootedtree during a storm in the USA.
Heavy Duty Pile RestorationSeaShield Fiber-Form
Suitable for vertical and raker piles withthese cross sections After fitting the Fiber-Forms the standard
marine grout is injected by pump.
GRP Fiber-Form Jackets + Steel Rebars + Standard Marine Grout = SeaShield Fiber-Form Description and Uses:This extremely robust, extra heavyduty system is designed to be usedon very badly corroded concretepiles where the use of steel rebarsto reinforce the void between thepile and the Fiber-Form is
essential. The void containing the steel rebars is then filled with standardmarine grout to complete the system.
10
Petrolatum Inner Layer + HDPE Jacket + Fastening Bands = SeaShield Series 100
Advantages:
● Proven long-term corrosion prevention
● Surface preparationwith mechanical and power tools or hp water jetting
● Can be applied to damp and immersed surfaces
● Easy and fast installation
● Each layer can be left between tides, no washing down necessary
● No drying or curing time between layers
● Environmentally friendly
Description:A tough, ultraviolet-resistantjacket that provides protectionto the Petrolatum Inner Layeragainst abrasion, wave actionand accidental impact. The sizeand thickness of the jacket arecustomised to meet application
Medium Duty Outer LayerSeaShield Series 100
Installing the SeaShield 100 Jackets over the Petrolatum Inner Layer. MARINE PROTECTION SYSTEMS
requirements. SeaShield jackets are secured by a 19mm banding systemselected for the intended environment.
Need the SeaShield Questionnaire? Get it from www.densoaustralia.com.au or from one of our sales team on +61 3 93567600
11
Need expert help or advice? Visit our website www.densoaustralia.com.au or speak to one of our sales team on +61 3 93567600
Description & Uses:Seashield Series 80 comprises theapplication of a double outer layerwrap of Densopol 80 Tape overthe Petrolatum Inner Layer. The system offers basic economicalprotection for wood, steel orconcrete piles. It is most suitablefor use in sheltered areas awayfrom heavy seas andstrong currents.
Application of Densopol 80 Marine Tapeover the inner petrolatum tape layer.
Cleaned pile ready for the application ofthe Seashield Series 80 System.
Petrolatum Inner Layer + Densopol 80 Tape = SeaShield Series 80Advantages:
● Easy and fast installation
● Basic economical protection
● Can be applied to damp and immersed surfaces
● Easily removed for inspection
Uses:SeaShield Series 100 can be used to encapsulate jetty piles, offshore riserpipes and exposed piping in the splash and intertidal zones.
It can accommodate piles with cylindrical, hexagonal, and square sections, aswell as support members and bracings.
Light Duty Outer LayerSeaShield Series 80
Medium Duty Outer LayerSeaShield Series 100
Petrolatum Inner Layer + HDPE Jacket + Fastening Bands = SeaShield Series 100
Hexagonal pile protected with SeaShieldSeries 100 system.
Close up of 19mm band fixing.
Suitable for vertical and raker piles withthese cross sections
Suitable for vertical and raker piles withthese cross sections
Pile Top To Jetty Deck SealSeaShield Pile Cap System
Advantages:
● Long-term corrosion prevention
● Environmentally friendly
● Protects a vulnerable area which has previously been difficult to protect
Description:A tough, ultraviolet-resistant pre-moulded sectional cap that provides protection to the vulnerable area between thetop of the pile and the underneath of the jetty platform. After any structural repairs have been carried out, the Pile Capis bolted to the underside of the jetty deck and the bottom of the cap overlaps onto the chosen SeaShield system whichhas previously been applied to the pile. The overlapping section of the Pile Cap onto the SeaShield Jacket is securely fastened with a 19mm band fixing.The void area within the Pile Cap is then sealed with an expanding marine foam system
The Pile Cap is bolted to the underside of the jetty deck.
A 19mm band fixing is used to get a good seal over the existingSeaShield system.
Diagram shows the interface between theSeaShield Pile Cap and SeaShield Jacket.
View of the underside of the jetty deck, shows the complete encapsulation and degree ofprotection given to the pile with the use of this system . MARINE PROTECTION SYSTEMS
Suitable for vertical and raker piles withthese cross sections
Patent Pending
12
Need the SeaShield Questionnaire? Get it from www.densoaustralia.com.au or from one of our sales team on +61 3 93567600
Need expert help or advice? Visit our website www.densoaustralia.com.au or speak to one of our sales team on +61 3 93567600
13
Below is an example of the type information that is required before any specific SeaShield Systemcan be recommended for installation. You can fill in the form online at www.densoaustralia.com.au.
1. Jetty / Location - Name:
2. Jetty Owner:
3. Consultant:
4. Contractor:
5. Type of Structure / Materials Handled:
6. Location:❒ Open Water Exposed❒ Open Water Sheltered❒ Harbour Exposed❒ Harbour Sheltered❒ Estuary❒ River
7. Age of Jetty:
8. Pile Configuration:❒ Round❒ Square❒ H Section❒ Hexagonal❒ Other
9. Number of Piles:❒ Vertical❒ Raker
10. Total Height of Protection Required Per Pile:
11. Pile Dimensions:DiameterPerimeterFace Sizes
12. Pile Material:❒ Steel❒ Cast Iron❒ Concrete❒ Timber❒ Other / Comments
13. Degree of Any Existing Corrosion:❒ Heavy❒ Moderate❒ Light❒ None
14. Degree of Marine Growth at this Location:❒ Heavy❒ Moderate❒ Light
15. Is Pollution Present:Please Comment
16. Exposure to:❒ Storms❒ Wind❒ Currents❒ Wave Action
17. Obstructions on Pile:❒ Cross Bracings❒ Pipes❒ Ladders❒ Brackets❒ CP Points❒ Other / Comments
18. Access to Site:❒ Vehicle❒ Water❒ Ladders❒ Scaffold
19. Work Restrictions:❒ Vessel Docking❒ Hot Working❒ Piles Nested Close Together❒ Other / Comments
20. Max Tidal Flow (Knots):
21. Please Give Dimensions (Diagram Below):Dimension ADimension BDimension CDimension DDimension E
Example of SeaShield Questionnaire:
Above: Abbot Point coal loading jetty, Australia -SeaShield System.
Above: The Ford Island Bridge, Pearl Harbor, Hawaii - SeaShield Series 2000 FD.
Need the SeaShield Questionnaire? Get it from www.densoaustralia.com.au or from one of our sales team on +61 3 93567600
Above: Jetty, Milford Haven, UK - SeaShield Series 2000 FD.
14
Above: LNG Jetty, Libya - SeaShield Series 2000 FD.
Above: LNG Jetty, Libya - SeaShield Series 2000 FD.
1000 piles protected
627 piles protected 400 piles protected
400 piles protected 3,333 linear metres protected
Since 1966 - Some Completed SeaShield Projects:
Above: RNLI Lifeboat Station, UK - SeaShield Series 500Above: LNG Jetty, Milford Haven, UK - SeaShield Series 2000 FD.
Above: Mining Jetty, Western Australia - SeaShield Series 2000 FD.
15
Need expert help or advice? Visit our website www.densoaustralia.com.au or speak to one of our sales team on +61 3 93567600
Above: Bridge supports in a river, UK - SeaShield System. Above: Yacht Club, Poole, UK - SeaShield Series 500.
319 piles protected 12 piles protected
4 piles protected 12 piles protected
250 piles protected
Since 1966 - Some Completed SeaShield Projects:
Winn & Coales International Ltd
Winn & Coales (Denso) Ltd - UKDenso House, Chapel Road, London
SE27 0TR
Tel: +44 (0) 20 8670 7511Fax: +44 (0) 20 8761 2456Email: [email protected]: www.denso.net
Denso North America Inc. - USA9747 Whithorn Drive, Houston, Texas
77095
Tel: +1 281 821 3355Fax: +1 281 821 0304
Email: [email protected]: www.densona.com
Denso North America Inc. - Canada90 Ironside Crescent, Unit 12, Toronto,
Ontario, M1X 1M3
Tel: +1 416 291 3435Fax: +1 416 291 0898
Email: [email protected]: www.densona.com
Denso South Africa (Pty) Ltd120 Malacca Road, Redhill Industrial Area, Durban North 4051 Republic of South Africa
Tel: +27 31 569 4319 Fax: +27 31 569 4328 Email: [email protected] Website: www.denso.co.za
QUALITY AND INNOVATION FROM 1883 INTO THE 21st CENTURY
Denso (Australia) Pty Ltd
411-413 Victoria Street, Brunswick Vic 3056, AustraliaMELBOURNE ● SYDNEY ● ADELAIDE ● BRISBANE ● PERTH
Tel: +61 3 93567600 or 1300 658 590 (toll free) ● Email: [email protected] ● Web: www.densoaustralia.com.au
Denso (New Zealand) Ltd Tel: +64 21 304 660 ● Email: [email protected]
A MEMBER OF WINN & COALES INTERNATIONAL
Approved Quality Management SystemAS/NZS ISO 9001:2000
Lloyds Register - Certificate No. MEL 0927759
All statements/data presented herein are given in good faith and believed to be appropriate and reliable. However, it is given without express or implied warranty or guarantee.Potential users of our materials are urged to conduct confirmatory trials to satisfy themselves as to the suitability of the selected product for their particular end use, prior to purchase.
Pub. No. A142.1.2010