Fire Alarm Thermal Camera

http://hpthermalcamera.com

export@chinahpws.com

Hope-Wish Technologies Inc.

01OPTION

02OPTION

03OPTION

04OPTION

Introduction

Front-end equipment

PlatformSoftware

Funtion

Content

01. Introduction

Early Detection Can Be More Important Than

Prevention.Unfortunately, most wildfires aren’t easily

preventable,To significantly mitigate the risk from and

cost of wildfires, they must be detected and suppressed

prior to reaching an uncontrolled state.

Hope-Wish TTVC series thermal imaging camera

specially design for forest fire prevention ,detection and

alarm,integrates perimeter surveillance, long-range area

observation, and fire detection analytics in a single PTZ

camera. The system provides a reliable response to

major safety risks by enabling the user to continuously

monitor target sites in the range of a few kilometers

from the mounting point.

02. Front-end detection equipment

the latest 5th uncooled

infrared technology and

continuously infrared

optical zoom technology

With 336*256 /640*512

uncooled FPA sensor

360°degree PT

6000m detect range

IP66 ingress protection

intelligent analysis module,

hot spot detection

algorithm,automatically detect

the flame, vehicles, personnel

and other heat sources

01OPTION

02OPTION

03OPTION

04OPTION

03. Platform & Software

F R 2 0 0 0 f i r e w a r n i n g

platform sof tware, can

realize the video display,

control, storage, playback,

scanning and automatic

control, automatic alarm

information processing,

automatic alarm record,

calculate calibration point

position, vir tual police

district management.

Alarming Mode

Two ways alarm: video superposition alarm + data returned (or switch).All alarm parameters and instructions can be through the

remote video OSD menu Settings, In addition to FR2000 fire prevention software, can also use the general platform software, can be

used with any video encoder.With functions of angle data back, cooperate with the background software, can be real-time GIS map

point precise positioning.

electronic map and fire

point position display

The electronic map has the functions of

zooming, ranging, positioning, printing, and

data exchange with front-end equipment. The

electronic map can receive the GPS position of

the front-end equipment, the video stream

data and the angle and azimuth information

of the PTZ, Display the location of the front-

end equipment and real-time radar scan area,

also can be selected front-end equipment,

real-time video images suspended on the

map display

360° Panorama

To the camera as the center for 360o full range of scanning, splicing out of a real panorama picture, more intuitive than the electronic

map, at the same time, the current camera viewing range will be displayed in red square on the panorama, in addition, the virtual

police area Will be blue polygon block diagram displayed on the panorama, to facilitate the user to determine the virtual alarm area

of the shield.

System and log management

System management functions, you can add to the front-end equipment to delete, name editing, encoding device-related

parameter settings, the user to delete delete management, system parameter settings, as well as detection wizard function to help

users are not familiar with step by step set scan detection.

Funtion

ScanDetect

AlarmLocate

Intelligent detection

Precise Location

Automatic scan

Auto Alarm

Application

http://hpthermalcamera.com

export@chinahpws.com

Thanks for your time