LOG SPLITTERMODEL NO: LOGBUSTER 6

PART NO: 3402035

OPERATION & MAINTENANCEINSTRUCTIONS

10/08

INTRODUCTION

Thank you for purchasing this CLARKE product.

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.

This guarantee does not effect your statutory rights.

IN THE BOX

A Log splitter frame

B Control arms

C Support table

D User guide

2

3

CONTENTS

Introduction ................................................................................2

Guarantee ..................................................................................2

In the box ....................................................................................2

Contents......................................................................................3

General safety rules ..................................................................4

Additional safety rules for log splitters .....................................5

Safety symbols ............................................................................7

Electrical connections...............................................................8

Identification of parts ................................................................9

Assembly .....................................................................................10

Operation ...................................................................................12

Maintenance..............................................................................16

Troubleshooting..........................................................................17

Disposal .......................................................................................17

Specifications .............................................................................18

Parts and servicing.....................................................................18

Declaration of conformity.........................................................19

GENERAL SAFETY RULES

WORK AREA 1. Keep the work area clean and well lit. Cluttered and dark areas invite accidents.

2. Do not operate log splitters in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Log splitters create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while operating the log splitter. Distractions can cause you to lose control.

4. The surface must be perfectly level to prevent the machine from moving during operation.

ELECTRICAL SAFETY 1. The log splitters plug must match the outlet. Never modify the plug in any way.

Unmodified plugs and matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

3. Do not expose log splitters to rain or wet conditions. Water entering a log splitters will increase the risk of electric shock.

4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the log splitter. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

5. When operating the log splitter outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

6. Do not leave the log splitter unattended when plugged in to the mains supply.

PERSONAL SAFETY 1. Stay alert, watch what you are doing and use common sense when operating a log

splittter. Do not use the log splitter while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating log splitters may result in serious personal injury.

2. Use safety equipment. Always wear eye protection. Safety equipment such as non-skid safety shoes, close fitting clothing and suitable work gloves should always be used.

3. Avoid accidental starting. Ensure the switch is in the off position before plugging in.

4. Do not overreach. Keep proper footing and balance at all times. This enables better control of the log splitters in unexpected situations.

5. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

WARNING: READ ALL INSTRUCTIONS. FAILURE TO FOLLOW ALL INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND/OR SERIOUS INJURY. SAVE THESE INSTRUCTIONS.

4

USAGE AND CARE 1. Do not force the log splitter. It will do the job better and safer at the rate for which it was

designed.

2. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the log splitter. Such preventive safety measures reduce the risk of starting the log splitter accidentally.

3. Storethe log splitter out of the reach of children and do not allow persons unfamiliar with log splitters or these instructions to operate the log splitter. Log splitters are dangerous in the hands of untrained users.

4. Maintain the log splitter. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the log splitters operation. If damaged, have the log splitter repaired before use. Many accidents are caused by poorly maintained power tools.

5. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

SERVICE 1. Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

ADDITIONAL SAFETY RULES FOR LOG SPLITTERS

Extra special care is required when using this powerful tool to safeguard yourself and that of others around you.

1. Never tamper with the log splitter or attempt to operate the machine without covers. Do not allow split logs to accumulate, always clean up as you work, accumulated split logs and wood chips can create a hazardous work environment.

2. The operator must operate the machines’ controls with both hands without using other makeshift systems, i.e. wedging control levers down etc.

3. The machine must only be used by one operator. The machine must be used by adults only.

4. Check that the logs being split are free from nails or wire, which may fly up or damage the machine. The ends of the logs must be cut square. Branches must be cut off flush with the trunk.

5. Never attempt to split two logs at once; one may be ejected with possibly serious damage.

6. Split wood in the direction of the grain. Do not attempt to split a piece of wood across the grain as this could damage the machine.

7. Do not attempt to load the log in to the machine whilst the log splitter is in motion.

8. Keep your hands well away from any splits and cracks which open in the log.

9. Never leave the machine unattended while it is running. If you leave the machine, even for a short time, disconnect it from the power supply.

10. Never use the machine whilst under the influence of alcohol, drugs, medicines, or when you are tired. A clear mind is essential for safety.

11. Always disconnect the power cable when not in use, when carrying out maintenance work or when moving the machine.

5

12. Never use the log splitter if it is damaged or if it needs servicing.

13. Before starting work, check correct functioning of all the safety devices and check for soundness of welded joints, securing nuts & bolts.

SIZE OF THE LOGS BEING SPLITThe image on the right shows the maximum log size that can be split.

• Do not attempt to split a log for longer than 5 seconds as the pump may be damaged by the oil overheating. This could occur when the wood being split is excessively fibrous, knotty or wet, green wood.

NOTE: A small log can be difficult to split if it has knots or a particularly tough fibre.

• It is better to stop and rotate the log by 90O, to see whether it can be split along a different plane.

• Not being able to split the log within 5 seconds, indicates that its hardness exceeds the capacity of the machine and it should therefore be discarded so as not to cause damage/injury.

320mm

1050mm

6

SAFETY SYMBOLS

7

8

ELECTRICAL CONNECTIONS

Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through an approved 13 amp BS 1363 plug, or a suitably fused isolator switch.

IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:

Green & Yellow - Earth

Blue - Neutral

Brown - Live

As the colours of the flexible lead of this appliance may not correspond with the coloured markings identifying terminals in your plug proceed as follows:

• Connect GREEN & YELLOW cord to terminal marked with a letter “E” or Earth

symbol “ ” or coloured GREEN or GREEN & YELLOW.

• Connect BROWN cord to terminal marked with a letter “L” or coloured RED.

• Connect BLUE cord to terminal marked with a letter “N” or coloured BLACK.

If this appliance is fitted with a plug which is moulded onto the electric cable (i.e. non-rewireable) please note:

1. The plug must be thrown away if it is cut from the electric cable. There is a danger of electric shock if it is subsequently inserted into a socket outlet.

2. Never use the plug without the fuse cover fitted.

3. When replacing a detachable fuse carrier, ensure the correct replacement is used (as indicated by marking or colour code).

4. Replacement fuse covers can be obtained from your local dealer or most electrical stockists.

FUSE RATINGThe fuse in the plug must be replaced with one of the same rating (13 amps) and this replacement must be ASTA approved to BS1362.

We strongly recommend that this machine is connected to the mains supply via a Residual Current Device (RCD)

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs yourself.

WARNING: THIS APPLIANCE MUST BE EARTHED

IDENTIFICATION OF PARTS

No Description Part number No Description Part number

1 Ram travel adjusting rod

LGLOGB601 10 Oil tank cover / air bleeder

LGLOGB610

2 Transport handle LGLOGB602 11 Wheels LGLOGB611

3 Split wedge LGLOGB603 12 Base LGLOGB612

4 Control levers connection bracket

LGLOGB604 13 Star knob LGLOGB613

5 Top motor shield LGLOGB605 14 Side bracket for support table

LGLOGB614

6 Plug & switch LGLOGB606 15 Table lock down hook LGLOGB615

7 Ram LGLOGB607 16 Control lever guard LGLOGB616

8 Motor LGLOGB608 17 Log holder LGLOGB617

9 Base cover LGLOGB609 18 Control lever LGLOGB618

9

ASSEMBLY

FITTING THE CONTROL ARMS 1. Position the control lever into the

side of the arm assembly as shown.

• Make sure the control lever goes into the slot on the arm assembly.

2. Lock the arm assembly in to position with the bolt, large washer, small washer and nut supplied.

3. Follow the same steps to install the other arm assembly.

FITTING THE WHEELS1. Slide one of the wheels onto the

axle followed by a washer.

2. Slide the axle through the holes on the frame as shown on the right.

3. Slide on a second washer and then the second wheel onto the axle.

• Make sure the wheel is on, the right way round (the notch indicated should be facing outwards).

4. Add a final washer and secure using the split pin provided.

10

FITTING THE SUPPORT TABLEThere are 3 positions available for the support table to accomodate different log lengths.

1. Insert the support table arms into both side brackets.

2. Insert the star knob to lock the support table into position.

• The star knob can be fitted on either side of the bracket.

MOVING THE LOG SPLITTER

To move the log splitter to the work site.

1. Make sure the oil tank cover / air bleeder is fully tightened.

2. Grasp handle (A) and tilt the log splitter towards you slightly.

Never try to lift the log splitter by handle (A).

CAUTION: BEFORE MOVING THE LOG SPLITTER, MAKE SURE THE OIL TANK COVER / AIR BLEEDER IS FULLY TIGHTENED TO AVOID OIL LEAKAGE.

11

OPERATION

PREPARATION• Plan your work before hand. Have your logs positioned where they

can be easily reached.

• Route the cord from the power source to the splitter in a way that safeguards against tripping on the cord, or the cord becoming damaged during the work session. Protect the power cord from impact, tugging or contact with corrosive materials.

LOGS

• When cutting up limbs and large sections, do not cut sections any longer than 1050 mm.

• Do not attempt to split green logs. Dry, seasoned logs split much more easily, and will not jam as frequently as green wood.

• Make sure the logs do not twist, rock or slip while being split.

• Break log in the direction of its growing grain.

• Do not attempt to split 2 logs at the same time. One of them may fly up and hit you.

BLEED THE HYDRAULIC SYSTEMBefore operating the log splitter, the oil tank cover / air bleeder should be loosened by 2-3 turns until air can go in and out of the oil tank smoothly.

• Air flow through the oil tank cover / air bleeder hole should be detectable when the log splitter is in operation.

Before moving the log splitter, make sure the oil tank cover / air bleeder is tightened to avoid oil leakage.

WARNING: FAILURE TO DO THIS WILL CAUSE PERMANENT DAMAGE TO THE LOG SPLITTER.

12

INSERT THE MAINS LEAD1. Insert the adapter plug into the

socket shown on the right.

2. Insert the mains plug into the mains power supply and switch on.

TURNING THE LOG SPLITTER ON/OFFWhile operating under extremely low temperature, turn on the log splitter on 15 minutes before use to preheat the hydraulic oil.

1. Lift up the flap on the switch housing to access the on/off buttons.

2. Press the ON button ( I ) to turn the logbuster on.

3. Press the OFF button ( 0 ) to turn the logbuster off.

4. In an emergency, press the red button on the outside of the switch housing.

CHECK THE SAFE OPERATION OF THE LOG SPLITTER1. Lower both control levers.

• Splitting wedge will begin to lower.

2. Release either of the levers.

• Splitting wedge should remain in position.

3. Release both levers.

• The ram should rise to its original position.

13

SPLITTING A LOGThis log splitter is designed to be operated by one person only and requires two handed operation by the user -

1. Place the log onto the support table vertically making sure that it is sitting flat on the support table.

• Ensure the wedge will come into contact with the log squarely on the end. Never attempt to split a log at an angle.

2. Grip the log securely using the control arms.

3. Press down on both levers to start the splitting action.

• Releasing either lever stops the splitting wedge.

• Releasing both levers will return the splitting wedge to its original position.

NOTE: Once you start splitting the log, do not reach into the machine.

4. Stack split logs as you work. This will provide a safer work area, by keeping it uncluttered.

CAUTION: SPLIT LOGS IN THE DIRECTION OF THE GRAIN. DO NOT PLACE LOGS ACROSS THE LOG SPLITTER FOR SPLITTING. IT MAY BE DANGEROUS AND MAY SERIOUSLY DAMAGE THE MACHINE.

WARNING: NEVER TRY TO SPLIT WOOD FOR MORE THAN 5 SECONDS, IF THE MACHINE CANNOT DO IT WITHIN THIS TIME, THE OIL WILL BEGIN TO OVERHEAT AND THE MACHINE MAY BE DAMAGED.

14

ADJUSTMENTS

TO SET WEDGE RAM STROKEAdjusting the ram stroke will set the height which the ram will return to, when you release the control levers.

1. Press down on both control levers until the splitting wedge is at the desired height.

• The upper position of the ram wedge should be about 3-5 cm above the logs being split.

2. Release one control lever and then switch off the motor.

• The ram will remain in its current position.

3.

Ram Travel Adjusting Rod

Locking Screw

Release the locking screw.

4. Raise ram travel adjusting rod until it is stopped by the spring inside.

5. Tighten the locking screw.

6. Switch on motor.

STORAGEWhen you have finish working with your log splitter:

1. Disconnect the log splitter from the mains supply.

2. Tighten the oil tank cover / air bleeder.

3. Clean the unit down using a dry cloth.

15

MAINTENANCE

HYDRAULIC OILThe hydraulic system is a closed system with an oil tank, oil pump and control valve.

• Check the oil level regularly using the dipstick attached to the oil tank cover / air bleeder.

TO TOP UP THE HYDRAULIC OIL

1. Remove the oil tank cover / air bleeder completely.

2. Using a clean funnel, pour in CLARKE hydraulic oil until the oil level is 2-3 cm from the top of the oil tank.

IMPORTANT: Only use CLARKE HYDRAULIC OIL, available from your nearest dealer.

Part No: 1Ltr - 3050830

5Ltr - 3050835

3. Clean the neck of the oil tank and replace the oil tank cover / air bleeder.

4. Run the log splitter 2-3 times (without splitting anything) after adding oil.

NOTE: The oil should be completely changed once a year.

SHARPENING THE WEDGESharpen the wedge of the log splitter using a fine-toothed file and smooth any burrs or crushed area along the cutting edge.

WARNING: MAKE SURE THAT THE LOG SPLITTER IS SWITCHED OFF AND DISCONNECTED FROM THE MAINS SUPPLY BEFORE STARTING ANY CLEANING OR MAINTENANCE PROCEDURES.

16

TROUBLESHOOTING

PROBLEM CAUSE REMEDY

Motor does not start. No power being supplied Check mains fuse

Extension lead is defective Unplug, check and replace if necessary

Switch is defective Return the unit to your local Clarke dealer for servicing.

Log splitter does not work while the motor is running.

Air bleeder is not open Open oil bleeder.

Control levers are bent Repair the bent control levers

Low oil level Check and refill hydraulic oil.

Log splitter works but with abnormal noise and vibration.

Low oil level Check and refill hydraulic oil.

DISPOSAL

When disposing of this product, do not dispose of with general waste. It must be disposed of according to the laws governing Waste Electrical and Electronic equipment, at a recognised disposal facility.

17

18

SPECIFICATIONS

Logbuster 6

Electrical Supply 230V @ 50Hz

Input Wattage 3000 W

Part Number 3402035

Maximum Force 5.5 tonnes

IP Rating IP54

Duty Cycle S6 40% (4 mins on / 6 mins off)

Weight 97 kg

Dimensions (L x W x H) 880 x 400 x 1050 mm

A-weighted Sound Pressure Level dB (A) 71 dB (A)

Log Capacity

Maximum Length 1050 mm

Minimum Length 550 mm

Maximum Diameter 320 mm

PARTS AND SERVICING

For Parts & Servicing, please contact your nearest dealer, orCLARKE International, on one of the following numbers

PARTS & SERVICE TEL: 020 8988 7400PARTS & SERVICE FAX: 020 8558 3622

or e-mail as follows:

PARTS: Parts@clarkeinternational.comSERVICE: Service@clarkeinternational.com

19

DECLARATION OF CONFORMITY