Locksmith Tool: What Types are needed for a Mobile Business? Save money from not buying useless tools with this simple guide.

There are different varieties of mobile businesses around the world. One of which, the mobile locksmith, is one of the most in demand due to the services they can offer. Mobile locksmiths are professionals who help clients with automotive locksmithing needs. In most cases, mobile locksmiths are hired when a client loses his or her keys and get locked out of the car. Mobile locksmiths make use of special tools to legally break into the car. Household objects, such as wire coat hangers, can’t be considered a locksmith tool. Locksmith tools are specially designed to open car doors without damaging them. These certain tools can be purchased at many lock shops, or through trade organizations such as the Master Locksmiths Association (MLA). In this guide, we’ll go through certain tools that you’ll only need for your mobile business. Slim Jim – Sometimes called a slim shim, is one of the most important tools used for a mobile locksmith business. Slim Jims are made up of a steel bar that may vary in sizes. Some Slim Jims may be as short as a few inches to as long as a couple of feet in length. The steel bar at the bottom of this locksmith tool is notched and may have a bend or curve along its length. A Slim Jim can be inserted in between the glass and weather stripping on a car window. This is often used to unlock the door without the keys. The notch on the bottom of the bar is used to trigger the control arm of the locking mechanism of the car. There are different Slim Jim varieties and models, depending on the car worked on. Before getting this tool, be aware that improper use can cause the disabling of the car’s airbags or electrical system.

J and L Tools – These tools are named according to their shapes. A J tool is used for unlocking raised lock/unlock buttons. A J tool is often used on cars that have their lock buttons along the inside of the car. These are common on older cars, whereas current models have recessed or electrical lock buttons. This locksmith tool is sneaked through the window until it reaches inside the car. Once done correctly, the J tool can be maneuvered to pull the unlock button and open the door. It’s very simple. This can be done by any locksmith. Greenford, a large suburban area in west London, UK, for instance have a lot of locksmith schools that teach novices how to use J Tools. An L tool, on the other hand, is shaped slightly different so it can work on various types of vehicle designs. However, this tool can’t be used by any locksmith. Tooting has L tools that are used with supplementary wires and guides that are fed through the window top to access the lock.

Auto Jigglers – Often called bump keys, are a mix of the convenience of having a key and the functionality of a lock pick. Depending on what area you’re from, auto jigglers may vary in design. But usually, auto jigglers resemble a ring of keys, each with different shapes. This tool should be acquired by any locksmith. Locksmith Carshalton, for instance, has auto jigglers for each major car model. Each car model uses a different locking mechanism. So this should be learned by every mobile locksmith. Earls Court, known for housing the Earls Court Exhibition Centre, may have cars unique to other countries. However, this isn't always the case.