LockMaster SR2 - ESIcms.esi.info/Media/documents/12919_1373636682649.pdf · Hot dipped galvanized...
Transcript of LockMaster SR2 - ESIcms.esi.info/Media/documents/12919_1373636682649.pdf · Hot dipped galvanized...
LockMaster SR2™
Security rated gates toLPS 1175 Category 2
6.0 | Access
FinishHot dipped galvanized and polyester powder coated. Available in the RAL range of colours.
DimensionsHeight 2400mmWidth (single) 0.9m – 3.0mWidth (double) 1.2m – 6.0mPost size (single) 80 x 80 x 5mm upto 250 x 250 x 6.3mmPost size (double) 150 x 150 x 5mm upto 250 x 250 x 6.3mm
Locking arrangementAll LockMaster SR2 gates have a purpose made lock box with a security key guard – a very secure solution for fence lines, compounds and secure storage.
VariationsLockmaster posts are available in a variety of lengths to accommodate ground conditions. Other variations are available:• Base plated posts• Straight extensions to gate frame for barbed or razor wire.
LockMaster SR2 posts and clampsThe LockMaster SR2 posts can be manufactured with or without base plates. Size of post will be determined by the width of gate ordered. Posts are flanged to accept any of the CLD systems. Frames are manufactured from RHS section and vertically welded to form extremely strong corners. Securus SR rated mesh is attached to the gate using pin hex security screws and washers.
DescriptionCLD LockMaster SR2 gates are a high security product with accreditation to LPS1175. All hinges are anti lift off type and fully adjustable. A high security dead lock is standard on all LockMaster SR2 gates, the lock is easily accessible from both sides. The gates are supplied with steel drop bolts which are lockable in the open position.A variety of toppings are available for the Lockmaster range including standard barbed and razor wire. More sophisticated anti – climb rotating spikes are also available to order.
All information contained within this document including technical details, graphics and photographs are copyright © CLD Fencing Systems 2013. This document may not be reproduced, copied, transmitted or stored in any form without written permission from CLD Fencing Systems.
All information correct at time of printing. We reserve the right to alter specification without notice.
Find out moreScan this QR code with your smart device to instantly access our website and find out what CLD can do for you.
Experience the Difference...T +44 (0)1270 764751 F +44 (0)1270 757503 E-mail [email protected]
www.cld-fencing.com
Head office: Unit 11, Springvale Business Centre, Millbuck Way, Sandbach, Cheshire, CW11 3HY
6.0 | Access
LockMaster SR2™
Specification clausesPlease call +44(0)1270 764751 for full specifications
FinishHot dip galvanised and polyester powder-coated. The full RAL range of colours available.
DescriptionCLD LockMaster SR2 gates are a high security product with accreditation to LPS1175. All hinges are anti lift off type and fully adjustable. A high security anti drill dead lock is standard on all Lockmaster SR2 gates, the lock is easily accessible from both sides. The gates are supplied with steel drop bolts which are lockable in the open position.
A variety of toppings are available for the Lockmaster range including standard barbed and razor wire. More sophisticated anti-climb rotating spikes are also available to order.
A
C
B
Gates dimensions
Heights 2.4 and 3.0 m
Width (single) 0.9m - 3.0m / (double) 1.2m - 6.0m
Gate frame 50 x 50 x 3 mm up to 100 x 50 x 3 mm
Post size (single) 80 x 80 x 5mm upto 250 x 250 x 6.3mm (double) 150 x 150 x 5mm upto 250 x 250 x 6.3mm
Visit www.cld-fencing.com/login.phpDrawn by Architects for Architects
• High Security
• Double or single leaf opening
• Double sided locking
• Full range of RAL colours available
• Government buildings
• Data centers
• Airports & seaports
• Utility suppliers
• High secure units
Suitable for:Features:
Security rated gates toLPS 1175 Category 2
Anti-lever gate frame design
Very secure integral lock
Heavy duty design
B
A
C
ULTIMATE from 1.8 to 2.4m high panelsFoundation dimensions shown are illustrative only, contractor must prepare foundations in accordance with ground conditions.
All dimensions shown are subject to manufacturing tolerances.
END PLAN
IN-LINE PLAN
INTERNAL CORNER PLAN
EXTERNAL CORNER PLAN
FULL PANEL PLAN
2485 POST CENTRES
2430
2030
1780
2500 28
00
3200FenceCAD
CAD Drawings for Security Fences & Gate Systems
Find out moreScan this QR code with
your smart device to instantly access even
more information.
Excellent product - enhanced our security...
“”
Secured by Design
Official Police Security Initiative
SBD
Police Preferred Specification
Conforms to BS1772: Part 14