LOCKER S - bene · LOCKeR_S. An optional base panel is also available. Additional features such as...
Transcript of LOCKER S - bene · LOCKeR_S. An optional base panel is also available. Additional features such as...
INSPIRING OFFICES. SINCE 1790.
LOCKER_SThe LOCKER_S by Bene ensure that there is always order in the office: documents and personal articles can be stowed and locked away here. Single-row and double-row models as well as wardrobe cabinets can be combined at will side-by-side. The colourful arrangement of the doors allows you to vary the look of your fronts. The LOCKER_S unit can also be provided with a casing: top panel, side covers, rear
wall cladding to complement and add value to the overall appearance, particularly to the free-standing LOCKER_S. An optional base panel is also available. Additional features such as a mail slot with a pigeon hole and a business / name card holder, turn your locker into a personal safe deposit box for the office. The individual doors are fitted with cylinder or combi-nation locks for secure access to the LOCKER_S.
© Bene GmBH, 01/2021
1
9
8
7
10
2
3
4
56
1
3 4
2 5
6
7
2
LOCKeR_SPRODUCT DeSCRIPTIOn
PRODUCT DESCRIPTIONLOCKER_S (SINGLE ROW / DOUBLE ROW)
LOCKER_S, single-row
Hinged door: 19 mm chipboard
Mail slot: plastic
Business card holder: polycarbonate
Combination lock: plastic / steel
Cylinder lock: steel / brass
Visible side: 19 mm chipboard
Shelf: 19 mm chipboard / + 25 mm ajustment feet can be levelled,
base panel optional
Intermediate shelf: 19 mm chipboard
Pigeon hole: steel plate
Rear wall: 16 m chipboard
LOCKER_S, double-row
Centre panel: 19 mm chipboard10
9
6
4
1
7
2
8
5
3
Shelf: 19 mm chipboard
Visible side: 19 mm chipboard
Clothes rod: chrome-plated steel
Pull-out rail: chrome-plated steel
Hat shelf: 19 mm chipboard
Rear wall: 16 mm chipboard
Top panel: 19 mm chipboard7
4
1
5
2
6
3
© Bene GmBH, 01/2021
1
3
2
3
LOCKeR_SPRODUCT DeSCRIPTIOn
PRODUCT DESCRIPTIONLOCKER_S WITH PANELS
Cover panel: 19 mm chipboard
Covered side: 19 mm chipboard
Rear wall cladding: 19 mm chipboard
A pinnable rear wall made of fabric can be optionally attached to all the cabinet types, with a maximum height of 1170 mm.
1
2
3
© Bene GmBH, 01/2021
28
4
28
4
57
4
57
4
77
4
77
4
96
9
96
9
53
1
53
1
62
6
62
6
72
6
72
6
83
3
83
3
83
3
83
3
72
6
72
6
53
1
53
1
62
6
62
6
43
3
43
3
31
7
31
7
38
1
38
1
44
7
44
7
51
9
51
9
52
6
52
6
51
9
51
9
45
4
45
4
44
7
44
7
25
8
25
8
30
8
30
8
36
1
36
1
26
7
26
7
27
5
27
5
27
5
27
5
27
5
27
5
26
7
26
7
36
9
36
9
36
9
36
9
36
1
36
1
31
5
31
5
31
5
31
5
30
8
30
8
26
5
26
5
26
5
26
5
25
8
25
8
38
7
38
7
38
1
38
1
25
2
25
2
25
9
25
9
25
2
25
243
3
43
3
32
4
32
4
31
7
31
7
23
6
23
6
33
6
33
6
23
6
23
6
33
6
33
6
4
LOCKeR_SOVeRVIeW
OVERVIEWCABINET TYPES
height 431 mm
single-row double-row
height 1.701 mm
height 1.116 mm
height 721 mm
height 1.916 mm
without pigeon hole +84 mm
height 1.311 mm
height 921 mm
height 1.501 mm
© Bene GmBH, 01/2021
5
LOCKeR_SDImenSIOnS
DIMENSIONS
W: 450, 600 D: 450, 600 H: 431 1 door 721, 921 1, 2 doors 1.116* 1, 2, 3 doors 1.311 2, 3 doors 1.501, 1.701 2, 3, 4 doors 1.701, 1.916 2, 3, 4, 5 doors
* Single door across the entire cabinet height not available over 1.117 mm onwards.
LOCKER_S, SINGLE-ROW LOCKER_S, DOUBLE-ROW
W: 900, 1.200D: 450, 600H: 431 2 doors 721, 921 2, 4 doors 1.116* 2, 4, 6 doors 1.311 4, 6 doors 1.501, 1.701 4, 6, 8 doors 1.701, 1.916 4, 6, 8, 10 doors
* Single door across the entire cabinet height not available over 1.117 mm onwards.
W: 450, 600: with rod 600*: with pull-out railD: 600*: with rod 450*: with pull-out railH: 1.311, 1.501, 1.701: without hat shelf 1.916: with hat shelf
* not variable
OPEN WARDROBE
© Bene GmBH, 01/2021
6
LOCKeR_SDImenSIOnS
DIMENSIONS
Divisions (width) Cover panel max. 2 divisions are possible; min. one division from 2.401 onwardsRear wall max. 5 divisions are possible; for height < 1.135: from 2.400 onwards (melamine), from 1.560 onwards (veneer), from 1.900 onwards (fabric) for height > 1.135: from 1.200 onwards (melamine / veneer )
The default value is a uniform division (e.g. half width); however, a different division for cover panel can also be entered.
LOCKER_S WITH PANELS
W: Cover panel, rear wall: user-defined, clear widths of the LOCKeR_S are variable from 450 to 7.200D: 450, 600, 900, 1.200 470: with rear wall claddingH: 450, 740, 940, 1.135, 1.330, 1.520, 1.720, 1.935
© Bene GmBH, 01/2021
7
LOCKeR_SOPTIOnS
OPTIONS
with mail slot with business card holder and mail slot
Rear side:operating instructions for combination lock
with business card holder
COMBINATION LOCK
CYLINDER LOCK
Cylinder lock
Clothes rod
* Combination lock FIXCODe / FReeCODe
Pull-out rail(in the extended state,max. load 5 kg)
MAIL SLOT (INCL. PIGEON HOLE) BUSINESS CARD HOLDER LOCK (CYLINDER LOCK OR COMBINATION LOCK)
CLOTHES ROD OR PULL-OUT RAIL HAT SHELF BASE PANEL
material: Plastic
* note service key: When you order LOCKeR_S with a combination lock it is recommended to also order the service key package. Combination lock FIXCODe: Fixed combination that can only be changed using the scanning pin (part of the service key package).Combination lock FReeCODe: The set combination is reset each time the lock is opened.
© Bene GmBH, 01/2021
8
LOCKeR_SInSPIRATIOnS
INSPIRATIONS
Inspiration #02
Single-row and double-row furniture with different doors to brighten up the look of your front.
Inspiration #01
LOCKeR_S, single-row/double-row with panels with cylinder lock.
© Bene GmBH, 01/2021
9
LOCKeR_SInSPIRATIOnS
INSPIRATIONS
Inspiration #04
Low height furniture can double as stand-up meeting space.
Inspiration #03
Cabinets and wardrobe cabinets for free-standing application in the room.
© Bene GmBH, 01/2021
10
LOCKeR_SCOLOURS & mATeRIALS
COLOURS & MATERIALSMELAMINE: Additional basic coloursMELAMINE: Basic colours
MELAMINE: Accent colours
MELAMINE: Decor colours with texture
MELAMINE: Decor colours
mW white mQ office white mC canvas mP platinum Tm clay
mA aluminium mS slate mB basalt
AR maple BH beech, light nG walnut grey
Ce elm white CO coco eA oak aragon
TX mustard TH marino blue TS fern green
mH stone grey
mD urban grey
eZ oak vicenza
© Bene GmBH, 01/2021
11
LOCKeR_SCOLOURS & mATeRIALS
COLOURS & MATERIALS
Various material collections are available as cover materials: Urban Plus, Xtreme Plus, Inn, Step, Step melange, Patina, Remix, europost, Clara, mainline Flex, Divina, Steelcut, Fiord, Hallingdal, Steelcut Trio, Divina melange, Divina mD, Greenwich Uni. more information about the specific fabric collections is available at www.bene.com.
VENEER: Maple
VENEER: Chestnut
VENEER: Nut
VENEER: Oak
VENEER: Bamboo
VENEER: Beech
INN (FABRIC_01)
AK canadian maple BG beech grey eY oak sylt eR oak amaretto eV oak vulcano eG oak grey
KD chestnut natural KP chestnut brown KQ chestnut grey
nF american walnut nR walnut siena nB walnut umbra nA waln. anthracite BJ bamboo
5W white 5A canvas 5B platinum 5D slate 5T anthracite 5H basalt
4m clay 4e ice blue 4K carmine red 4X mustard 4W green 4B azure blue
© Bene GmBH, 01/2021
12
LOCKeR_SBene WORKS SUSTAInABLY
BENE WORKS SUSTAINABLY
LOCKER_S LEED POINTS
Bene plays a leading role in responsible environmental management. It is practised throughout all company divisions—from product devel-opment, procurement, production and logistics to product recycling. Bene considers ecology to be a central element of its responsible and sustainable corporate strategy. Bene sees the legal regulations as minimum requirements and strives for better and more sustainable environ-mental protection throughout the group. Bene's environmental policy principle is: Avoidance — Minimisation — Recycling — Disposal.
The Leadership in energy and environmental Design (LeeD) is a system to classify ecological construction that was developed by the U.S. Green Building Council. As an internationally recognised standard, it defines numerous standards for environmentally friendly, resource pro-tecting and sustainable construction. The use of the LOCKeR_S is an important contribution to LeeD certification. The following criteria for this are from »LeeD 2009 for Commercial Interiors«:
LOCKER_S WITH MATERIAL COMPONENTS*
mR Credit 4 Recycling share up to 2 points
mR Credit 5 Regional materials up to 2 points
mR Credit 7 Certified wood up to 1 point
IeQ Credit 4.5 material with low hazardous substance content up to 1 point
LOCKER_S — ECOLOGICAL STANDARDS · 98 % recyclable · 90.3 % of contents are renewable raw materials · 69.49 % of contents are recycled production materials (29.01 % post-consumer, 40.48 % pre-consumer.) · 47.15 % of contents are recycled production materials in compliance with LeeD (29.01 % post-consumer, 40.48 % pre-consumer.) · Resource-conserving product design · Use of certified wood (chain of custody) · Use of materials tested for presence of hazardous substances · no PVCs, chromium, lead or mercury · Individual parts can be sorted according to homogeneous categories · Recyclability and positive contribution to CO2 footprint (average of 117.29 kg CO2)
environment-related information about Bene: www.bene.com / sustainability
* Average values based on 12 different models.Total weight of reference model: 72.36 kg
Wood66.83 kg / 92.37 %
Adhesives0.01 kg / 0.02 %
Zinc1.02 kg / 1.41 %
Steel3.65 kg / 5.05 %
Plastic0.84 kg / 1.16 %
20.139
(on request)