Load Suspension Equipment Catalogue
-
Upload
joao-strauss -
Category
Documents
-
view
41 -
download
2
Transcript of Load Suspension Equipment Catalogue
LOAD SUSPENSIONEQUIPMENT
TongsCrossheadsGrabsC Hooks
www.carlstahl-nordgreif.de
Zangen Traversen Greifer C-Haken
www.carlstahl.com
LOAD SUSPENSION EQUIPMENTCarl Stahl NORDGREIF
Carl Stahl NORDGREIFThe specialist in the north.
Security is our utmost priority. For this reason, all Carl Stahl Nordgreif lifting equipment meets the latest accident prevention regulations from „Operating Lifting equipment BGR 500“ and the latest machine guidelines and the new EU stan-dard. All our lifting equipment is CE-designated and is supplied with factory certification.
Technology and know-how to your advantage: use of fine-grain structural steels, construction and manufacture using cutting edge techno-logy results in extremely durable lifting equip-ment even under extreme pressure. We build using CAD, two or three-dimensional.
Our lifting equipment is manufactured and supplied in accordance with DIN 15428 or DIN EN-13155, DIN 15018.
Tangible quality for one-off and series production.
Carl Stahl Nordgreif has many years‘ experience in the lif-ting equipment field. Our activities are focussed particularly on developing and manufacturing tailor-made solutions for grab, pincer and crosshead technology. We also plan and develop special solutions for extremely diverse applications. Our strength lies in customer-oriented advice and individual planning according to your requirements.
This catalogue gives you an overview of our series products and customer-specific special constructions. We are also giving you a brief glimpse into the array of complex load suspension solutions that we have realised internationally.
Take us at our word!
2 Carl Stahl LSE
Wire Industry
Steel Industry
Aluminium Industry
Paper Industry
Containers
Car Industry
Special Constructions
Crossheads
ForkliftsC Hooks
Drum grabs
Handling Technology
Tailored to you and classified by industry.
For Carl Stahl Nordgreif the customer takes centre stage.
Therefore, the catalogue contains an overview oriented by industry and application, which enables you to assign your required applications and specifications more simply to our series products and individually realised complex load sus-pension solutions.
Direct, customer-oriented and efficient in planning, advising and manufacturing.
Infoline: +49 (0) 408 391 526Fax: +49 (0) 408 391 427Internet: www.carlstahl-nordgreif.de
The Carl Stahl Company Group with 50 sites worldwide - your skilled partner.
3Carl Stahl LSE
LSE APPLICATIONS
4 Carl Stahl Load Suspension Equipment / LSE
Wire IndustryWire Coil Inner Tongs 8Wire Coil Inner Tongs Crossheads 9 Wire Coil Outer Tongs 11Coil Tongs 12
Wire Coil Hooks 13Coil Tilters 13Tilting Tables 13
Structural Steel Mesh Grabs 14Structural Steel Mesh Crossheads 16Adjustable Crossheads / Telescopic Crossheads for Steel Bands 17
Steel IndustrySlab Tongs 20Block Tongs 21Billet Tongs 23
Drum Transport Tongsfor Doubling and Working Rolls 24Drum Transport Crossheads 26Coil Grabs, Horizontal, Vertical,Slit Tongs 28Coil Hooks 34Tilting Tables 36Sheet Stack Grabs 37Convector Sheet Tongs 39
Aluminium IndustryBlock Tongs 42Coil Tongs, Vertical 43
Papier IndustryPaper Roll TongsMechanical, Electrical, Hydraulic 46Tambur Crossheads 47
ContainersBanking Frames 49Container Crossheads 49SpreadersMechanical, Electrical, Hydraulic 50
Car IndustryTool Grabs 54board lifts 55
Tool Strippers 57
Special ConstructionsHeavy Load Crossheads 59Turning Equipment 60
01
18
40
44
48
52
58
06
5Carl Stahl Load Suspension Equipment / LSE
Handling TechnologyDRUM HANDLINGDrum Tongs Horizontal / Vertical 78Drum Gear 79Drum Collars 79Drum Turning Tongs 79
TONGSRound Profile 80Rectangular Profile 80Logs 81Rails 81
Cardboard 82Turning 82Stone Blocks 82Bales 83Boxes 83Cases 83
LIFTING CLAMPSSafety Clamps 84Sheet Clamps 86Beam Clamps 87Screw Clamps 90Concrete Pipe Clamps 92
Enquiry Form 93-95
LSE HANDLING
CrossheadsLong Hook Crossheads 62TA/TAV/TB/TBV Stays 64Rigid Crossheads 64Adjustable Crossheads 65Boom Crossheads 65Forklift Crossheads 65Special Crossheads 66Long Crossheads 66Rotating Crossheads 66Telescopic Crossheads 67H Crossheads / 4-Pt. Crossheads 68Tambur Crossheads 68Turning Crossheads 69
ForkliftsManual 70Automatic 70Stand Lifts 71
C HooksCoil Tilting Hooks 72Counterweights 72Chain Suspensions 73Spring Balances 73
Drum Grabs Cradle Grabs 74Spindle Grabs 75
62
70
74
76
6 Carl Stahl LSE
LSE WIRE INDUSTRY
Solutions for the wire industry -
Nothing is more constant than change. The demands on commercial properties are always changing. Therefore, companies in the construction industry concentrate on problem-oriented solutions, which are precisely oriented to the demands of modern architecture and cost-efficient manufacturing.
The strong growth potential in the construction industry over the last few years poses new, innovative challenges on production and logistics. Increasing production quantities require efficient lifting equipment, which is developed and produced specifically for structural steel meshes and wire coils.
Your advantage: industry-specific know-how in advising, planning and manufacturing.
7Carl Stahl LSE
Wire Coil Inner Tongs Wire Coil Inner Tongs Crossheads Wire Coil Outer Tongs Coil tongs
Wire Coil Hooks Coil Tilters
Tilting Tables Structural Steel Mesh Grabs Structural Steel Mesh Crossheads Adjustable Crossheads / Telescopic Crossheads for Steel Bands
8 Carl Stahl LSE
LSE WIRE INDUSTRY COIL INNER TONGS
3-arm wire coil inner tongs, type DCIZ-3-650, for grabbing bound wire coils of up to 5 t net weight
Wire coil inner tongs wide opening, particularly heavy steel works design
Wire coil inner tongs with electromagnetic opening and closing device and leading-in funnel
2-arm wire coil inner tongs, type DCIZ-2-650, designed with round ram attachment
9Carl Stahl LSE
Wire coil inner tongs for loose wire collars4-arm wire coil inner tongs, special construction with roller-supported parallel motion
Wire coil inner tongs in 4-times combination with adapter crosshead
10 Carl Stahl LSE
LSE WIRE INDUSTRY COIL INNER TONGS
Special crosshead with flange-mounted wire coil inner tongs in steel works design, adjust grab width individually by hand using spindle and crank handle
Design as above, but with grabbed coils Special crosshead with 4-times arrangement of wire coil inner tongs and electromagnetic release device. Grab width can be adjusted individually by hand using roller chassis and locking pin.
11Carl Stahl LSE
LSE WIRE INDUSTRY COIL OUTER TONGS
Wire coil outer tongs, small design, suitable for laying coils on bobbin winders.
Wire coil outer tongs, large design with very large internal height, also suitable for laying unwound coils at high winch heights.
Wire coil inner tongs in very narrow special construction, also with large internal height
12 Carl Stahl LSE
LSE WIRE INDUSTRY COIL TONGS
Coil tongs for vertical transport
Coil tongs with step-by-step motion
Coil tongs for vertical transport, each with load capacity of up to 5 t
Special SolutionsNaturally, we also offer you solutions for horizontal transport and special coils.
13Carl Stahl LSE
LSE WIRE INDUSTRY C HOOKS, TILTING TABLES TURNING EQUIPMENT
Drahtcoilaussenzange in kleiner Ausführung, geeignet um Coils auf Spulautomaten aufzulegen.
3-arm C hooks for wire coils
Electromotive coil turning station withturning drive and lifting table
Electromotive tilting table for turningcoils up to 90°
14 Carl Stahl LSE
LSE WIRE INDUSTRY STRUCTURAL STEEL MESH GRABS
Structural steel mesh grabs, mechanical opening and closing,elec. internal adjustment and slewing gear
15Carl Stahl LSE
Simple mechanical structural steel mesh grab with automatic step-by-step motion and manual table height adjustment using crank handle
Structural steel mesh grab with individual cross adjustment
16 Carl Stahl LSE
LSE WIRE INDUSTRY STRUCTURAL STEEL MESH GRABS
Electrohydraulic structural steel mesh grab, internal grab
Electrohydraulic structural steel mesh grab, internal grab, with horizontal slewing gear with feet adjustable by length and cross for the different mesh types
Electrohydraulic structural steel mesh grab, internal grab, with slewing gear and pulley attachment, grab width adjustable by length and cross, mobile feet, with electronic internal height adjustment for different mesh lifting heights
17Carl Stahl LSE
Electrohydraulic structural steel mesh grab, internal grab, with slewing gear and pulley attachment, grab width adjustable by length and cross, mobile feet, with electronic internal height adjustment for different mesh lifting heights
18 Carl Stahl LSE
LSE STEEL INDUSTRY
Solutions for the steel industry -
The steel industry is characterised by clearly increased production volumes despite international competition. The resulting high production cycles mean an extreme demand on hot operation. The demands on load suspension equipment in their production lifecycle are changing accordingly. Therefore, steel industry companies are concentrating increasingly on solutions, which are precisely tailored to these extreme demands and guarantee cost-efficient manufacturing.
The slab tongs, block tongs, drum transport crossheads and coil hooks developed by us are efficient lifting equipment, which are developed and manufactured specifically for the steel industry.
Your advantage: industry-specific know-how in advising, planning and manufacturing.
19Carl Stahl LSE
Coil Hooks Tilting Tables Sheet Stack Grabs Forklifts Convector Sheet Tongs
Slab Tongs
Block Tongs Billet Tongs Profile TongsDrum Transport Tongsfor Doubling and Working Drums Drum Transport Crossheads Coil Grabs, Horizontal, Vertical, Slit Tongs
20 Carl Stahl LSE
LSE STEEL INDUSTRY SLAB TONGS
Electrohydraulic slab tongs with electronic lifting mechanism and hydraulic table height adjustment, but with two-point attachment
Electromotive four-times slab tongs with electric lifting mechanism and electric table height adjustment
21Carl Stahl LSE
LSE STEEL INDUSTRY BLOCK TONGS
Mechanical block tongs for hot operation
Mechanical block tongs, designed as four-bar tongs and adjustable grab width
22 Carl Stahl LSE
LSE STEEL INDUSTRY BLOCK TONGS
Electrohydraulic block tongs for round block transport with movable backs, suitable for vertical transport and for laying blocks in hot operation
LSE STEEL INDUSTRY BILLET TONGS
Billet tongs for hot transport
23Carl Stahl LSE
24 Carl Stahl LSE
LSE STEEL INDUSTRY DRUM TRANSPORT TONGS
Mechanical drum transport tongs with electrohydraulic hold-down function to secure the construction units against torsion
25Carl Stahl LSE
LSE STEEL INDUSTRY DRUM TRANSPORT TONGS
Electrohydraulic working drum transport tongs with hold-down function for construction units
Electromotive doubling drum transport crossheads
26 Carl Stahl LSE
LSE STEEL INDUSTRY DOUBLING DRUM TRANSPORT CROSSHEADS
Electromotive doubling drum transport crossheads with mobile grab pins for the construction units
Electromotive doubling drum transport crossheads with mobile grab pins for the construction units
27Carl Stahl LSE
LSE STEEL INDUSTRY WORKING DRUM TRANSPORT CROSSHEADS
Electromotive doubling drum transport crossheads for grabbing doubling drums with construction units
28 Carl Stahl LSE
LSE STEEL INDUSTRY TELESCOPIC COIL GRABS
Telescopic coil grabs without slewing gear
Electromotive telescopic coil grabs with horizontal slewing gear, with light barriers to capture the coil internal diameter
Telescopic coil grabs with integrated weighing mechanism
Telescopic coil grabs with slewing gear
29Carl Stahl LSE
Telescopic coil grabs, suitable for transporting coils with horizontal axis. Grabbing is effected on the internal diameter. Electromotive opening and closing.
The standard design includes a motor above roller chains with lateral starting contact banks and contact banks in the feet support to prevent unauthorised opening in the presence of a load. A contactor control is included in our delivery.
Moreover, the telescopic coil grab can also be equipped with the following motor types:- Trapezium spindle- Steering rack motor- Electrohydraulic motor
V
W
F
I
B
G
C
A1
A2
H
E
R250
D
Load capacity
t
1015202530354045
A1
400500600600600600600600
A2
17501800200020002000220022002200
B
120120120120120120150150
C
280300360385385385410410
D
240300300320320320340340
E
6007507508008408809301000
F
14001400145015501750175018001800
G
200220240260300300330330
H
13001350140016001600180019002000
I
7508008008009009009501000
V
120130130200200240300300
W
100120150160200200220240
Dimensions approx. (mm) Own Weight kgwithout
Slewing gear
18002050230025003100345037003800
withSlewing gear
12001500185020002100230025002800
TypePart No.
TCG 10TCG 15TCG 20TCG 25TCG 30TCG 35TCG 40TCG 45
30 Carl Stahl LSE
LSE STEEL INDUSTRY TELESCOPIC COIL GRABS
Parallelogram coil grabs have a very large grab range and remain small side-ways-on even when lifting large grab widths, so this type of grab can be used in small spaces for coils stocked on top of one another, e.g. for loading and unloading ships.
The drive is electrohydraulic, standard design with disconnecting contact banks on the side and contact banks in the feet support to prevent unauthor-ised opening in the presence of a load.
Each type can also be equipped with electromotive or electrohydraulic horizontal slewing gear.
G
B
C A2
A1Hm
in.
W
Hmax
.
W
V
H
R250
D
I
Load capacity
t
1015202530354045
A1
250300400400450450450450
A2
16501650200020002100210022002200
B
120120120120120120150150
C
280300320350400450450480
D
300300300320320320340340
E
6007007007308008509001000
Hmin.
18002000220022002400240024002500
G
220220240260300300330330
Hmax.
20002300260026002800280028002900
I
7508008008009009009501000
V
100130130200200240300300
W
100120150160200200220240
Dimensions approx. (mm) Weight (kg)non
rotating
18002050230025003100345037003900
rotating
15001800200022002700300032003500
TypePart No.
PCG 10PCG 15PCG 20PCG 25PCG 30PCG 35PCG 40PCG 45
31Carl Stahl LSE
Additional equipment:
- Integrated slewing gear for precise positioning of the tongs- Securing to prevent unauthorised opening when loaded- Lateral start disconnection- Indicator lamps for closing travel + load is on- Photo sensors to recognise the coil inner diameter- Automatic lubrication- Welded-on hooks- Weighing equipment
Parallelogram coil grabs
Additional equipment:
- Electromagnetic turnable drive unit with slewing range disconnection 0°-355° above roller end switch- Securing to prevent unauthorised opening when loaded- Lateral start disconnection - Photo cells for internal diameter recognition- Hinged support feet- Protective rollers to prevent material damage- V support block as hold-down device
32 Carl Stahl LSE
LSE STEEL INDUSTRY SPECIAL ACCESSORIES
1
1
2
2
3
3
413
4
6
14
6
7
7
812
8
9
9
1011
10
5
15
5
18532kg
11
12
13
14
15
Start rollers
Contact pusher
Contact bank
Hold-down device
End switch
Light barriers
Weighing equipment
Slewing gear
E cases
Roller chain drive
Automatic lubrication
Sensor for tilt
Welded-on hooks
Hinged support feet
Special contact banks
33Carl Stahl LSE
Horizontal slewing gear Side contact banks Feet contact banks to prevent unauthorised opening when loaded
Light barriers / photo sensors
Weighing equipment Automatic lubricationWelded-on hooks
Hinged support feet Special contact banks
Wheel-away foot Light barriers Position lamp
34 Carl Stahl LSE
LSE STEEL INDUSTRY COIL HOOKS
Multiple coil hooksThis coil hook can take up to nine wire coils and is equipped with 2 retention points for twist-lock bolting.
C 33 tipping coil hooksSuitable for tipping and straightening steel band rings or loop coils.
See page 72 for more coil hooks and technical details.
35Carl Stahl LSE
LSE STEEL INDUSTRY COIL HOOKS
C hook suspension gear for paired useSuitable for coil or thick-wall pipe transport.
C 30 coil hooks with counterweight balanceStable welded steel construction of high quality steel for extreme use. The constructive alignment of the balancing weight means the support plate remains horizontal both when empty and loaded.
We also make in-between sizes and special designs.
36 Carl Stahl LSE
LSE STEEL INDUSTRY TILTTING TABLES
Electrohydraulic tilting tables to tip coils by 90° up to a load capacity of 40 t
Electrohydraulic tilting table Electromotive angle tilting table
37Carl Stahl LSE
Electromotive telescopic sheet stack grabs with fixed under-grab feet
Electromotive telescopic sheet stack grabs with fixed central grab feet, with additional, manually removable grab feetand electrohydraulically retractable outer grab feet
LSE STEEL INDUSTRY SHEET STACK GRABS
38 Carl Stahl LSE
LSE STEEL INDUSTRY SHEET STACK GRABS
Electromotive telescopic sheet stack grabs with fixed grab feet and with two additional wheel-away grab feet - the outer ones can be wheeled away individually. Steering is effected via SPS, the individual feet settings can be programmed and automatically wheeled in and out.
39Carl Stahl LSE
Mechanical convector sheet tongs to grab convector sheets in annealing plants.
LSE STEEL INDUSTRY CONVECTOR SHEET TONGS
40 Carl Stahl LSE
LSE ALUMINIUM INDUSTRY
Solutions for the aluminium industry -
As in steel works, already increased production volumes increased demands on the production process. Because of the low load-bearing capacities of the material thicknesses and greater construction volumes, special solutions had to be realised in this industrial sector. There are also partly sensitive surfaces on special products that must be protected accordingly.
Therefore, aluminium industry companies are increasingly concentrating on solutions, which are precisely tailored to these special demands and, e.g. using special overlays, guarantee efficient manufacture in the grab range of the lifting equipment.
The slab tongs and coil tongs developed by us are lifting devices, which have been specifically developed and manufactured for the aluminium industry.
Your advantage: industry-specific know-how in advising, planning and manufacturing.
41Carl Stahl LSE
Slab Tongs
Block Tongs
Coil Tongs,Horizontal / Vertical
Electrohydraulic double block tongs for aluminium blocks, designed with
electromotive slewing gear and pulley attachment
42 Carl Stahl LSE
LSE ALUMINIUM INDUSTRY DOUBLE BLOCK TONGS
43Carl Stahl LSE
LSE ALUMINIUM INDUSTRY VERTICAL COIL TONGS
Double vertical coil tongs, hydraulic design
Single vertical coil tongs, mechanical design
44 Carl Stahl LSE
LSE PAPER INDUSTRY
Solutions for the paper industry -
The paper industry is experiencing clearly increased produc-tion volumes thanks to increased demand internationally. The demands on lifting equipment are increasing. Therefore, we are developing solutions that are specifically developed for the high weights of the materials and their sensitive surfaces. Thus, cost-efficient manufacture can even be guaranteed for a sensitive material like paper.
The paper roll tongs and tambur crossheads developed by us are efficient lifting devices, which are specially developed for the paper industry.
Your advantage: industry-specific know-how in advising, planning and manufacturing.
45Carl Stahl LSE
Paper Roll Tongs Mechanical, Electrical, Hydraulic
Tambur Crossheads
46 Carl Stahl LSE
LSE PAPER INDUSTRY PAPER ROLL TONGS
Electrohydraulic paper roll tongs with slewing gear
Electrohydraulic paper roll grabs with 90 degree slewing gearMechanical long hook crosshead
47Carl Stahl LSE
Tambur crossheads with electric slewing gear (shown without hook)
LSE PAPER INDUSTRY TAMBUR CROSSHEADS
Mechanical long hook crossheads
48 Carl Stahl LSE
LSE CONTAINERS
Solutions for container handling -
There have been standardised transport containers for al-most 100 years. Yet today‘s standard container comes from the 1950s. Today, the container has conquered the world and the amount of goods transported by container increases every year.
Efficiency and speed of handling is becoming increasingly important in the transport and logistics market. These increased demands on lifting equipment require perfect solutions in container handling.
The specially developed spreaders, banking frames and container crossheads are precisely tailored to the requested needs and guarantee fast turnaround of goods.
Your advantage: industry-specific know-how in advising, planning and manufacturing.
49Carl Stahl LSE
Banking Frames
Container Crossheads
SpreadersMechanical, Electrical, Hydraulic
Mechanical 40‘ banking frames with manualtwist-lock bolting above reel chain
50 Carl Stahl LSE
LSE CONTAINERS CONTAINER SPREADERS
Container spreaders with central bolting
Container spreaders with central boltingContainer spreaders with BFD adapters
51Carl Stahl LSE
Electrohydraulic container spreaders for 20‘ISO containers and interchangeable bodies
Electrohydraulic container spreaders for 20‘ISO containers and interchangeable bodies
Container spreaders electrohydraulically telescopicfrom 20’ to 40’
52 Carl Stahl LSE
LSE CAR INDUSTRY
Solutions for the car industry -
Increasing automation in the car industry requires new solutions for lifting equipment.
Particularly for tool grabs for press tools to load board grabs. Here, the very smooth and oily surfaces require care - therefore, we develop special hold-down equipment.
Efficiency and speed in regular production processes also present increased demands. The specially developed tool grabs, board load forklifts and tool strippers are designed precisely to the needs of the car industry and guarantee smooth production.
Your advantage: industry-specific know-how in advising, planning and manufacturing.
53Carl Stahl LSE
Tool Grabs board lifts Special Grabs Tool Strippers
54 Carl Stahl LSE
LSE CAR INDUSTRY TOOL GRABS
Electromotive tool grabsfor the car industry
55Carl Stahl LSE
Electrohydraulic board lifts with hold-down function and grab width adjustment
LSE CAR INDUSTRY BOARD LIFTS
56 Carl Stahl LSE
LSE CAR INDUSTRY BOARD LIFTS
Board lifts with mechanical hold-down function
57Carl Stahl LSE
Electromotive tool stripping equipment to rotate press tools
LSE CAR INDUSTRY TOOL STRIPPERS
58 Carl Stahl LSE
LSE SPECIAL CONSTRUCTIONS HEAVY LOAD CROSSHEADS TURNING EQUIPMENT
Special constructions
The progressive automation in manufacturing requires multifunctional special solutions. A particular challenge is manipulating several levels and axles.
Individual solutions tailored to the processes guarantee lifting of the highest efficiency and speed in regular produc-tion processes.
The special constructions described on the following pages represent just a fraction of the possible individual solutions.
Your advantage: cross-industry know-how in advising, plan-ning and manufacturing.
59Carl Stahl LSE
Heavy Load Crossheads
Turning Equipment
60 Carl Stahl LSE
LSE SPECIAL CONSTRUCTIONS TURNING EQUIPMENT
Electrohydraulic turning equipment for 20 t static press tools
61Carl Stahl LSE
LSE SPECIAL CONSTRUCTIONS TURNING EQUIPMENT
Electromotive turning equipment for assembly purposes Electromotive beam turning equipment for
rolled steel sections
62 Carl Stahl LSE
LSE CROSSHEADS FORKLIFTS C HOOKS
Crossheads, Forklifts and C Hooks –
Crossheads offer symmetrical load suspension in principle and, thus, better load distribution. The large range of requirements in the different industries requires a broad range of rigid, adjustable, frame, telescopic and long crossheads.
Lifting different materials also requires an extensive selection of forklifts and C hooks. Carl Stahl Nordgreif offers you a complete range of individual or series products.
The specially developed crossheads, forklifts and C hooks are designed precisely to the needs of the industry and guarantee smooth production processes.
Your advantage: industry-specific know-how in advising, planning and manufacturing.
63Carl Stahl LSE
CROSSHEADS
Long Hook CrossheadsTA/TAV/TB/TBV StaysRigid Crossheads Adjustable Crossheads Boom CrossheadsForklift CrossheadsSpecial CrossheadsLong CrossheadsRotating CrossheadsTelescopic CrossheadsH Crossheads / 4-Pt. CrossheadsTambur Crossheads Turning Crossheads
FORKLIFTS
ManualAutomaticStand Lifts Board lifts
C HOOKS
CounterweightsCoil Tilting HooksChain Suspensions Spring Balances
64 Carl Stahl LSE
LSE CROSSHEADS
T20/T21 crossheads, rigid and adjustableRigid crosshead type T 20: crosshead with rotatable security eye hooks. This crosshead is a robust load construction. Grading and calculation are effected in accordance with DIN 15018.
The welded steel construction is exclusively made using inspected welds. The adjacent table shows our standard range. Adjustable crosshead Type T 21:Designed with two adjustable stays and security eye hooks. Crosshead attachment for single hooks. Further load capacities and sizes on request.
W
H
L
V
n x k
k
W
H
V
L
Load capacity(kg)
1000100010001000
1600160016001600
2500250025002500
5000500050005000
6300630063006300
10000100001000010000
16000160001600016000
Type Part No.adjustable
7T21.010.0017T21.010.0027T21.010.0037T21.010.005
7T21.016.0017T21.016.0027T21.016.0037T21.016.005
7T21.025.0027T21.025.0037T21.025.0057T21.025.006
7T21.050.0027T21.050.0037T21.050.0057T21.050.008
7T21.063.0037T21.063.0047T21.063.0057T21.063.006
7T21.100.0037T21.100.0057T21.100.0087T21.100.010
7T21.160.0037T21.160.0057T21.160.0087T21.160.010
Type Part No.fixed
7T20.010.0017T20.010.0027T20.010.0037T20.010.005
7T20.016.0017T20.016.0027T20.016.0037T20.016.005
7T20.025.0027T20.025.0037T20.025.0057T20.025.006
7T20.050.0027T20.050.0037T20.050.0057T20.050.008
7T20.063.0037T20.063.0047T20.063.0057T20.063.006
7T20.100.0037T20.100.0057T20.100.0087T20.100.010
7T20.160.0037T20.160.0057T20.160.0087T20.160.010
Dimensions approx. (mm)L fixed
1000200030005000
1000200030005000
2000300050006300
2000300050008000
3000400050006300
30005000800010000
30005000800010000
L adjustable
1000 - 5002000 - 10003000 - 10005000 - 1000
1000 - 5002000 - 10003000 - 10005000 - 1000
2000 - 10003000 - 10005000 - 10006300 - 1300
2000 - 10003000 - 10005000 - 10008000 - 2000
3000 - 10004000 - 10005000 - 15006300 - 1300
3000 - 10005000 - 10008000 - 200010000 - 3000
3000 - 10005000 - 10008000 - 200010000 - 3000
n x k
2 x 1254 x 1254 x 2508 x 250
2 x 1254 x 1254 x 2508 x 250
4 x 1254 x 2508 x 25010 x 250
4 x 1254 x 2508 x 2506 x 500
4 x 2506 x 2507 x 25010 x 250
4 x 2504 x 5006 x 5007 x 500
4 x 2508 x 2506 x 5007 x 500
H fixed
380380400400
400400430450
510510580600
630680760660
700730800820
890820800850
92095010501150
H adjustable
400400420450
420420450500
610610680700
730780860750
800890900920
1000950920980
1080110012001300
V
120120120120
130130130130
150150150150
190190190190
210210210210
250250250250
300300300300
W
55555555
60606060
75757575
9090190190
95959595
120120120120
135135135135
253860150
305075230
75110230280
100160360850
220260470560
28065013501950
5007209502650
203050120
254060200
6390210250
75135325800
180230420500
22058012001800
4006008002400
Weight approx. (kg) fixed adjustable
TA/TAV/TB/TBV Stays,rigid and adjustableType TA: Spreader, fixed with rocker for passage ofchain. Special model in adjustable version.
Type TB: Spreader, adjustable with slider; for descending chain mobile on all sides. Available also in fixedversion.
H L
d
A
Load capacity (kg) 90°
Head angle
1400280045007100
11200
Chain gauged (mm)
68101316
Dimensions (mm)Fixed version
A
10001000 - 15001000 - 15001000 - 15001250 - 2500
Adjustable versionA min - A max
1000 - 15001200 - 20001200 - 20001200 - 20001900 - 2500
7TA067TA087TA107TA137TA16
7TAV067TAV087TAV107TAV137TAV16
7TB067TB087TB107TB137TB16
7TBV067TBV087TBV107TBV137TBV16
Type/Part No.with rocker
Type/Part No.with slider
fixed adjustable fixed adjustable
65Carl Stahl LSE
LSE CROSSHEADS
B
H
L
Load capacity(kg)
10002500250050005000500075007500
100001000015000
TypePart No.
7T22.010.0217T22.025.0217T22.025.0327T22.050.0327T22.050.0427T22.050.0527T22.075.0527T22.075.0637T22.100.0427T22.100.0637T22.150.063
Dimensions approx. (mm)Length max
2000 - 10002000 - 10003000 - 10003000 - 10004000 - 10005000 - 15005000 - 15006000 - 20004000 - 10006000 - 20006000 - 2000
Width max.
1000 - 5001000 - 5002000 - 10002000 - 10002000 - 10002500 - 10002500 - 10003000 - 10002500 - 10003000 - 10003000 - 1000
H
60064071086088090011001150120012501450
9014023034045060068098077511501400
Weightapprox.(kg)
Dimensions approx. (mm)
T23 crossheads for skeleton containers Rigid crossheads with four drum hooks. Designed with a mobile and a rigid hook pair.
Load capacity
(kg)
100015003000
Type Part No.
7T23.10.1087T23.15.1087T23.30.108
Weight
kg
404565
Dimensions approx. (mm)
B
600600600
H
360380450
I
150160160
L
120012001200
V
120120150
T25 Forklift shoesSingle attachment shoe with rotating hook for forklifts. Dimensions A and B are variable.
H
A
B
H
Load capacity(kg)
1000150020003000
Type Part No.
7T25.0107T25.0157T25.0207T25.030
Dimensions approx. (mm)A
120140160180
B
50606080
H
160180200220
56810
Weightapprox.(kg)
T22 boom crosshead adjustable Boom crossheads adjustable crosshead type T 22
T24 Forklift lifting beamsDouble attachment lifting beam with rotating hookfor forklifts. Rigid design with low clearance. Dimensions A, B and C can also be manufactured toyour specifications. B
C
A
H
Load capacity(kg)
1000150020003000
Type Part No.
7T24.0107T24.0157T24.0207T24.030
Dimensions approx. (mm)A
500500600600
B
120140160200
C
606080100
H
140160200200
10152030
Weightapprox.(kg)
66 Carl Stahl LSE
LSE CROSSHEADS SPECIAL CROSSHEADS
Adjustable load crossheads with two-sided balance compensator
Rope compensation crossheads with variable attachment head Weight-optimised long crossheads
Special crossheads with concrete lifting pins
Electromotive rotating crossheads for 2-crane operation
Load crossheads with lateral welded-on hooks
Adjustable crossheads with rotating hook attachment
67Carl Stahl LSE
LSE CROSSHEADS ELECTROMOTIVE TELESCOPIC CROSSHEADS
Electromotive telescopic crossheads with steering rack motor Electromotive telescopic crossheads with uppersteering rack and 2 drive units
68 Carl Stahl LSE
LSE CROSSHEADS SPECIAL CROSSHEADS
Electromotive horizontal slewing gear
Crossheads with special attachments
Concrete sleeper grab for 30 sleepers of different lengths Electromotive tambur crosshead
Balance crosshead with integrated electro chain gear to shorten the suspension chain
Electromotive turning crosshead with grid adjustment
Crossheads with special attachments
69Carl Stahl LSE
LSE CROSSHEADS ELECTROMOTIVE TURNING CROSSHEADS
Turning crosshead as ancillary equipment - direct current supplied to the starter battery
Turning crosshead with chain adjustment Turning crosshead with worm gear pair drive Electromotive turning crosshead
Electromotive turning crosshead with adjustable grid
70 Carl Stahl LSE
LSE LIFTING EQUIPMENT MANUAL / AUTOMATIC
L41 forklifts with balancing weightsType L41: forklift with balancing weight. The forklift remains horizontal when laden and unladen.The transport belts must be applied at the centre of gravity.
L42 forklifts with spring weight balance and adjustable teethThe centre of gravity balance is effected using a gas pressure spring. Additionally, the load teeth here are adjustable so all popular pallet types and stacking boxes can be lifted. An internal height adjustment can also be supplied for all types.
Transport hooks with manual hold-down devices.
71Carl Stahl LSE
LSE LIFTING EQUIPMENT FORKLIFTS STAND LIFTS
Start-up position
Lifting position
27
27
Stand control device with automatically movable counterweight
Transport hooks with manual hold-down devices
72 Carl Stahl LSE
LSE C HOOKS COIL HOOKS
C 30 coil hooks with counterweight balanceStable welded steel construction of high quality steel for extreme use. The constructive alignment of the balancing weight means the support plate remains horizontal both when empty and loaded.We also make in-between sizes and special designs.
Type C 33 tipping coil hooksSuitable for tipping and straightening steel band rings and coils. These must be well bound and be sitting on squared beams. Very simple handling.
Load capacityin t
0,51,01,02,52,53,04,05,0
Type Part No.
7C33.005.0027C33.010.0027C33.010.0037C33.025.0027C33.025.0037C33.030.0037C33.040.0047C33.050.005
Dimensions approx. (mm)A
100 - 200100 - 200200 - 300100 - 200200 - 300250 - 350250 - 400350 - 500
C
810101212152025
D
60707070708090100
I
400450500500500550600650
H
520600650680680730840900
V
100120120150150150190190
1012162025304050
Weightapprox.(kg)
Load capacityin t
10101010
15151515
20202020
252525
303030
TypeBestell-Nr.
7C30.100.0077C30.100.0107C30.100.0127C30.100.015
7C30.150.0107C30.150.0127C30.150.0157C30.150.020
7C30.200.0107C30.200.0127C30.200.0157C30.200.020
7C30.250.0127C30.250.0157C30.250.020
7C30.300.0157C30.300.0177C30.300.020
Dimensions approx. (mm)B
375 - 750500 - 1000625 - 1250750 - 1500
500 - 1000625 - 1250750 - 15001000 - 2000
500 - 1000625 - 1250750 - 15001000 - 2000
625 - 1250750 - 15001000 - 2000
750 - 1500875 - 17501000 - 2000
A
5657509401125
75094011251500
75094011251500
94011251500
112513201500
C
230230270290
290290320350
300320330370
360360400
380400420
I
600600650650
750750700700
850850800800
850850850
950950950
H
910910960960
1120112010701070
1310131012601260
140014001400
155015501550
V x W
250 x 120250 x 120250 x 120250 x 120
300 x 135300 x 135300 x 135300 x 135
380 x 180380 x 180380 X 180380 X 180
450 x 210450 x 210450 x 210
500 x 220 500 x 220 500 x 220
270400500680
60078010001500
850100012501700
120015002000
190021002450
Eig.-Gew.ca. kg
Load capacityin t
0,50,50,50,5
1,01,01,01,0
2,52,52,52,5
5,05,05,05,0
7,57,57,57,5
Type Part No.
7C30.005.0037C30.005.0057C30.005.0077C30.005.010
7C30.010.0037C30.010.0057C30.010.0077C30.010.010
7C30.025.0037C30.025.0057C30.025.0077C30.025.010
7C30.050.0077C30.050.0107C30.050.0127C30.050.015
7C30.075.0077C30.075.0107C30.075.0127C30.075.015
Dimensions approx. (mm)B
150 - 300250 - 500375 - 750500 - 1000
150 - 300250 - 500375 - 750500 - 1000
150 - 300250 - 500375 - 750500 - 1000
375 - 750500 - 1000625 - 1250750 - 1500
375 - 750500 - 1000625 - 1250750 - 1500
A
225375565750
225375565750
225375565750
5657509401125
5657509401125
C
60707580
7580100110
90110135140
160180200220
200230230250
I
400400400400
450450450450
500500500500
550550550550
550550550550
H
520520520520
600600600600
680680680680
780780780925
830830830830
V x W
100 x 50100 x 50100 x 50100 x 50
120 x 55120 x 55120 x 55120 x 55
150 x 75150 x 75150 x 75150 x 75
190 x 90190 x 90190 x 90190 x 90
230 x 110230 x 110230 x 110230 x 110
12202840
20304860
356080120
165220280435
220290400490
Weightapprox.(kg)
I
A
C
B
W
V
H
I
A
C
B
W
V
H
73Carl Stahl LSE
LSE C HOOKS COIL HOOKS C31 coil hooks with chain attachment Type C31: : the net weight of the C hook can be kept down thanks to the chain attachment.
Load capacityin t
2,52,5
5,05,05,05,0
7,57,5 7,57,5
10101010
15151515
20202020
Type Part No.
7C31.025.0077C31.025.010
7C31.050.0077C31.050.0107C31.050.0127C31.050.015
7C31.075.0077C31.075.0107C31.075.0127C31.075.015
7C31.100.0077C31.100.0107C31.100.0127C31.100.015
7C31.150.0107C31.150.0127C31.150.0157C31.150.020
7C31.200.0107C31.200.0127C31.200.0157C31.200.020
Dimensions approx. (mm)B
375 - 750500 - 1000
375 - 750500 - 1000625 - 1250750 - 1500
375 - 750500 - 1000625 - 1250750 - 1500
375 - 750500 - 1000625 - 1250750 - 1500
500 - 1000625 - 1250750 - 15001000 - 2000
500 - 1000625 - 1250750 - 15001000 - 2000
A
565750
5657509401125
5657509401125
5657509401125
75094011251500
75094011251500
C
135140
160180200220
2002302302501
230230270290
290290320350
300320330370
I
500500
550550550550
550550550550
600600650650
750750700700
850850800800
H
15001600
1500160017001900
1600160019002150
1700180019002200
2000210022002500
2100220025002700
V x W
135 x 75135 x 75
180 x 100180 x 100180 x 100180 x 100
200 x 110200 x 110200 x 110200 x 110
200 x 110200 x 110200 x 110200 x 110
300 x 160300 x 160300 x 160300 x 160
340 x 180340 x 180340 x 180340 x 180
75110
150200280350
200300400490
270400500680
60078010001500
850100012501700
Weightapprox.(kg)
C32 coil hooks with spring centroidal balance Type C32: the automatic spring centroidal balance facilitates lifting of different coil weights without moving the centre of gravity. the automatic spring centroidal balance facilitates lifting of different coil weights without moving the centre of gravity.
Load capacityin t
2,5
5,05,05,05,0
7,57,57,57,5
10101010
15151515
20202020
Type Part No.
7C32.025.010
7C32.050.0077C32.050.0107C32.050.0127C32.050.015
7C32.075.0077C32.075.0107C32.075.0127C32.075.015
7C32.100.0077C32.100.0107C32.100.0127C32.100.015
7C32.150.0107C32.150.0127C32.150.0157C32.150.020
7C32.200.0107C32.200.0127C32.200.0157C32.200.020
Dimensions approx. (mm)B
500 - 1000
375 - 750500 - 1000625 - 1250750 - 1500
375 - 750500 - 1000625 - 1250750 - 1500
375 - 750500 - 1000625 - 1250750 - 1500
500 - 1000625 - 1250750 - 15001000 - 2000
500 - 1000625 - 1250750 - 15001000 - 2000
A
750
5657509401125
5657509401125
5657509401125
75094011251500
75094011251500
C
140
160180200220
200230230250
230230270290
290290320350
300320330370
I
500
550550550550
550550550550
600600650650
750750700700
850850800800
H
1250
1250130013001400
1500155015501650
1500160016501700
1700175018001900
1900195020002100
V x W x X
175 x 75 x 35
175 x 75 x 40190 x 90 x 40190 x 90 x 40190 x 90 x 45
230 x 110 x 50230 x 110 x 50230 x 110 x 50230 x 110 x 55
250 x 120 x 55250 x 120 x 55250 x 120 x 60250 x 120 x 60
300 x 135 x 70300 x 135 x 70300 x 135 x 75300 x 135 x 75
380 x 180 x 80380 x 180 x 80380 x 180 x 85380 x 180 x 85
90
110125145160
135150200250
230250300380
400430550700
400500700950
Weightapprox.(kg)
74 Carl Stahl LSE
Cradle grabs with manual stacking machine
Cradle grabs with manual stacking machine for frontal lifting of stackable cradles
Cradle grabs with manual stacking machine
Cradle grabs with step-by-step motion and electronic monitoring of the closing
LSE DRUM GRABS CRADLE GRABS
75Carl Stahl LSE
Spindle grabs for foil rolls
Spindle grabs for sheet boards with mobile grab feet
Spindle grabs with turning gear and reel chain wheel
Spindle grabs with electromotive drive for opening and closing
LSE DRUM GRABS SPINDLE GRABS
76 Carl Stahl LSE
LSE HANDLING
Solutions for handling –
In the handling sector, we offer an entire system of diverse tongs and clamps for perfect load suspension. The large range of loads in the different industries requires special solutions.
Carl Stahl Nordgreif offers you a complete range of individual or series products for handling. The specially developed tongs and clamps are designed precisely to the requirements -whether drum handling, lifting clamps or inner tongs - all guarantee a smooth production process.
Your advantage: industry-specific know-how in advising, planning and manufacturing.
77Carl Stahl LSE
DRUM HANDLINGDrum TongsHorizontal / Vertical Drum Gear Drum CollarsDrum Turning Tongs
LIFTING CLAMPSSafety ClampsSheet ClampsBeam ClampsScrew ClampsConcrete Pipe Clamps
TONGSRound ProfileRectangular ProfileLogsRails
CardboardTurningStone BlocksBalesBoxesInner Tongs
78 Carl Stahl LSE
LSE DRUM HANDLING DRUM TONGS HORIZONTAL / VERTICAL
Z64 drum tongs for vertical or horizontal drumsDrum tongs to transport horizontal or vertical drums in accordance with DIN 66 43 with movable grab jaws and rotating interlock and opening lever. Grab width equipped for constant drum diameter; also suitable to turn filled drums.
Z59 drum tongsDrum tongs for vertical steel drums. This is a simple, robust tong for grabbing under the drum edge. Designed with opening lever.
Z63 drum tongs for horizontal drumsTongs for roll channel drums in accordance with DIN 66 43 and 66 35, which have a low construction height and automatically locking opening lever.
B
V
I
A
V
H
I
B
A
H
V
A
I
Load capacity(kg)
250250500500
Type Part No.
7Z64.002.0567Z64.002.0647Z64.005.0567Z64.005.064
Dimensions approx. (mm)A
560640560640
B
1400140014001400
H
1500150015001500
I
600600600600
V
60607070
60607070
Weightapprox.(kg)
Load capacity(kg)
250250500500
Type Part No.
7Z59.002.0567Z59.002.0647Z59.005.0567Z59.005.064
Dimensions approx. (mm)A
470 - 560560 - 640470 - 560560 - 640
B
700800700800
H
400 - 480430 - 530400 - 500430 - 530
I
50505050
V
60608080
10121215
Weightapprox.(kg)
Load capacity(kg)
250500
Type Part No.
7Z63.002.0917Z63.005.091
Dimensions approx. (mm)A
760 - 910760 - 910
H
400 - 500400 - 500
I
3030
V
6070
1012
Weightapprox.(kg)
79Carl Stahl LSE
LSE DRUM HANDLING DRUM GEAR
Drum gear (FHZ) to straighten, transport and tip steel drums
Drum collars (Z66) for vertical lifting
80 Carl Stahl LSE
LSE TONGS ROUND PROFILE / RECTANGULAR PROFILE
Z50 round profile tongsRound profile tongs for horizontal transport of round materials of every kind, equipped as standard with an automatic opening lever. All round profile tongs are available with a protective covering for sensitive transport goods. All tongs are available as a special design with step-by-step motion. We make all in-between sizes, even for higher loads and altered grab widths.
Z51 rectangular profile tongsThe grab jaws of the rectangular profile tongs are equipped with an extremely abrasion-proof protective cover. They are particularly suitable for transporting goods made from steel, concrete and wood. However, the goods must be free from fat and oil to ensure trouble-free grabbing. The force of pres-sure of the tongs is calculated so that the friction factor between the protective cover and the foods may not be less than 0.75 µ. Please make a special request in the case of oily goods. All rectangular profile tongs are equipped with an opening lever. We make all in-between sizes, also with higher load capacities and other grab ranges. The grab jaws can be equipped as a special design with hardened round anchor plates for oily or moist goods.
V
F
H
A
B
H
V
C
I
A
Load capacity(kg)
250250
500500500
10001000100010001000
25002500250025002500
Type Part No.
7Z50.002.0157Z50.002.025
7Z50.005.0207Z50.005.0357Z50.005.050
7Z50.010.0257Z50.010.0357Z50.010.0507Z50.010.0807Z50.010.120
7Z50.025.0257Z50.025.0357Z50.025.0507Z50.025.0807Z50.025.120
Dimensions approx. (mm)A
40 - 15060 - 250
40 - 200100 - 350200 - 500
60 - 250100 - 350200 - 500300 - 800800 - 1200
60 - 250100 - 350200 - 500300 - 800800 - 1200
B
200250
300300400
300300400440500
330330400440600
F
400600
500700900
70080095014002400
700850100014002450
H
300 - 500400 - 800
350 - 700500 - 800600 - 900
450 - 700500 - 800600 - 900900 - 14001400 - 2400
500 - 800550 - 900650 - 1000900 - 14001400 - 2500
V
6565
757575
8080808080
9595959595
611
152535
283550130200
506072240360
Weightapprox.(kg)
Load capacity(kg)
250250250250
500500500500
10001000100010001000
250025002500
Type Part No.
7Z51.002.0067Z51.002.0127Z51.002.0267Z51.002.050
7Z51.005.0067Z51.005.0127Z51.005.0267Z51.005.050
7Z51.010.0127Z51.010.0267Z51.010.0507Z51.010.0757Z51.010.100
7Z51.025.0307Z51.025.0507Z51.025.075
Dimensions approx. (mm)A
20 - 6050 - 125115 - 260250 - 500
20 - 6050 - 125115 - 260250 - 500
50 - 125150 - 260250 - 500480 - 750730 - 1000
150 - 300250 - 500480 - 750
B
370400560850
380400480850
50060085010001000
90011001100
C
75757575
75757575
100100100100100
120120120
H
300 - 360300 - 450380 - 650500 - 1000
300 - 360300 - 450380 - 670500 - 1000
360 - 500430 - 700500 - 1000500 - 1100600 - 1200
600 - 800700 - 1200700 - 1200
I
75757575
75757580
9090110110110
150150150
V
65656565
75757575
7580808080
959595
7101418
10121622
2328406070
7090110
Weightapprox.(kg)
H
V
I
B
A
81Carl Stahl LSE
LSE TONGS LOGS / RAILS
Z62 log tongsTongs with large grab width and low outer dimensions for transporting logs. The grab points can be changed from a load capacity of 2,500 kg. Designed with opening lever.
Z60 rail tongsRail tongs for transporting Vignoles rails type S and UIC and crane rails, very stable design with opening lever, combined with defensive latch, i.e. the rail tongs cannot open on the ground in the grab state despite stress relief or hitting the ground.
V
B
A
H
Load capacity(kg)
5001000250025005000
Type Part No.
7Z62.005.0507Z62.010.0807Z62.025.0807Z62.025.1007Z62.050.100
Dimensions approx. (mm)A
200 - 500300 - 800300 - 800400 - 1000500 - 1000
B
6501100115014001500
H
500 - 700750 - 900750 - 900900 - 1200900 - 1200
V
8585959595
12236085130
Weightapprox.(kg)
Load capacity(kg)
100020004000
Type Part No.
7Z60.010.0087Z60.020.0087Z60.040.009
Dimensions approx. (mm)A
15 - 8515 - 8515 - 95
B
350380380
H
400450450
I
508080
V
909090
152025
Weightapprox.(kg)
82 Carl Stahl LSE
LSE TONGS CARDBOARD / TURNING TONGS
Z61 cardboard tongsParallel tongs with extremely large and narrow grab jaws with rubber profile cover, which guarantees large pressure distribution. Particularly suitable for cardboard boxes that are very close together. These tongs have an opening lever.
Z58 turning tongsThese turning tongs are suitable for straightening, turning or rotating transport goods. These are parallelogram tongs; the grab jaws open and close in parallel. The grab jaws can be rotat-ed and with 90° locking they enable perfect adjustment to the goods. These turning tongs are equipped with an opening lever.
Z65 profile tongs for stone blocksAdjustable profile tongs with very large span range. The desi-red grab widths and centres of gravity are quickly adjusted using locking pins. Low construction height. Designed with opening lever. The grab jaws are equipped with a protective cover.
V
B
I
H
A F
H
V
B
A
V
H
I
AB
Load capacity(kg)
125125125125125125125125
Type Part No.
7Z61.001.0307Z61.001.0407Z61.001.0507Z61.001.0607Z61.001.0707Z61.001.0807Z61.001.0907Z61.001.100
Dimensions approx. (mm)A
100 - 300200 - 400300 - 500400 - 600500 - 700600 - 800700 - 900800 - 1000
B
1515151515151515
F
700700700700700700700700
H
570 - 950570 - 950570 - 950570 - 950570 - 950570 - 950570 - 950570 - 950
I
125125125125125125125125
V
6060606060606060
1517181920202223
Weightapprox.(kg)
Load capacity(kg)
125125250250500500
10001000
Type Part No.
7Z58.001.0257Z58.001.0357Z58.002.0307Z58.002.0457Z58.005.0457Z58.005.0607Z58.010.0607Z58.010.080
Dimensions approx. (mm)A
150 - 250250 - 350150 - 300300 - 450300 - 450450 - 600450 - 600650 - 800
B
600600700700720720800800
H
500 - 900550 - 950600 - 1050650 - 1100700 - 1150800 - 1250850 - 1300950 - 1500
I
250300300350350400430550
V
6060606070708585
2529343948587283
Weightapprox.(kg)
Load capacity(kg)
250250500500
1000
Type Part No.
7Z65.002.0657Z65.002.0807Z65.005.0807Z65.005.1007Z65.010.100
Dimensions approx. (mm)A
200 - 650200 - 800200 - 800200 -1000200 -1000
B
9001050105012501300
H
600600600700700
I
150150175175200
V
6060707080
2528354065
Weightapprox.(kg)
83Carl Stahl LSE
LSE TONGS BALE / BOX / CASE TONGS
Z52 tongs for bales and boxesTongs for transporting pressed paper or material bales, boxes and wooden planks. Simple robust pincer construction with opening lever.
Z56 / Z57 stock box tongsStock box tongs to lift warehouse stacking boxes.Type Z 56 outward and type Z 57 inward grabbing. For type Z 56 grabbing occurs on the box seam, for type Z 57 it is underneath the reinforced seam. So that the tongs do not open when the stacking box is jogged or hits the ground, the grab arms are tensioned with a draw spring.
V
H
I
B A
H
V
A
Load capacity(kg)
250500500
10001000
Type Part No.
7Z52.002.0507Z52.005.0507Z52.005.0657Z52.010.1007Z52.010.120
Dimensions approx. (mm)A
250 - 500250 - 500300 - 650600 - 1000800 - 1200
B
808080110110
H
400 - 650400 - 650450 - 720700 - 950900 - 1050
I
150150180200220
V
6570708080
1215183845
Weightapprox.(kg)
Load capacity(kg)
100100200200100100200200
Type Part No.
7Z56.001.0307Z56.001.0457Z56.002.0307Z56.002.0457Z57.001.0307Z57.001.0457Z57.002.0307Z57.002.045
Dimensions approx. (mm)Greifweite in mm
300450300450300450300450
A
380530380530320470320470
H
320320320320320320320320
V
6565656565656565
66668888
Weightapprox.(kg)
Type Z 57 Type Z 57
84 Carl Stahl LSE
LSE LIFTING CLAMPS SAFETY CLAMPS
Load:
I
II
III
IV
V
100% 75% 50%
For load train for diagonal pull
K11
K22 K23
K15 K17
K16 K26
K12 K13 K19
K24 K27
85Carl Stahl LSE
9
8
1
13
12
11
7
6
5
3
4
2
10
1 8
2 9
3 10
4 11
5 12
6 13
7
Replacement parts list for housing types K10, K11, K12, K13, K16, K20, K22, K23, K24
Body
Lifting eye
Suspension bolt
Lifting joint
Lifting joint bolt
Intermediate joint bolt
Cam with bolt
Spring
Intermediate joint bolt
Intermediate joint
Jaw bolt
Pad with screw
Rosette with screw
86 Carl Stahl LSE
LSE SAFETY CLAMPS VERTICAL SHEET TRANSPORT
K10 safety clamps for vertical sheet transport and for turning and straighteningThe clamps are very suitable for vertical sheet transport of indi-vidual sheets. To guarantee secure handling the clamps have a tension mechanism, which presses the serrated grab pawl against the sheet to be lifted before the actual lifting process using spring resistance and, in so doing, prevents the clamps from slipping. Therefore, it is not possible to open the lifting clamp for uninten-tional loads. Because of the micro-serrated round anchor plates and the pawl, a microform closure arises, as the anchor plates and pawl press on the material of the load. Therefore, even small grab tracks must be taken into account on the load. The sheet surface or thick-ness must be less than HRC 40. The load bearing capacity of the clamps is reduced in the event of diagonal pull. We recommend using the pair method for longer sheets, a 2-leg attachment or in combination with a coupling crosshead.
K11 safety clamps with gimballed attachmentThe basic design of this clamp is like the aforementioned clamp of the K10 type, but this clamp also has a gimballed hinge to apply lateral force better.
I
B A
F
V
H
H
V
I
B AF
Load capacity(kg)
200200750
100010001000
15002500250025002500
30005000500050005000
1000010000
Type Part No.
7K10.002.0157K10.002.0257K10.007.0157K10.010.0207K10.010.0507K10.010.075
7K10.015.0207K10.025.0307K10.025.0507K10.025.0757K10.025.100
7K10.030.0307K10.050.0507K10.050.0757K10.050.1007K10.050.1507K10.100.0607K10.100.100
Dimensions approx. (mm)A
0 - 1510 - 250 - 150 - 200 - 500 - 75
0 - 200 - 300 - 500 - 75
25 - 100
0 - 300 - 5025 - 7550 - 10050 - 1500 - 50
50 - 100
B
282834586565
5865657070
7080808585110110
F
95105100160230250
165200230265290
210250275350400320360
H
150150185240300360
250290320340340
335340380540540420450
I
45454565115110
6585115115115
90115125150150125135
V
404050757575
7585858585
85100100100100100110
1,51,52,54812
57101616
12151624252430
Weightapprox.(kg)
Load capacity(kg)
200750
1000150025005000
Type Part No.
7K11.002.0157K11.007.0157K11.010.0207K11.015.0207K11.025.0307K11.050.050
Dimensions approx. (mm)A
0 - 150 - 150 - 200 - 200 - 300 - 50
B
283458586580
F
95100160165200250
H
150185240250290340
I
4545656585115
V
4050757585100
235
5,5817
Weightapprox.(kg)
87Carl Stahl LSE
LSE SAFETY CLAMPS BEAMS / GIMBALLED K12 safety clamps for beam profilesType K12 with safety lock. Can be locked in open and closed position. Particularly suitable for horizontal transport. The suspension eyes are at the beam‘s centre of gravity. Universal applications, also in pairs on the face of steel beams. Can also be supplied with gimballed attachment. This design is particularly suitable for paired attachment of welded steel constructions.
K21 safety clamps for beams and profiles with gimballed attachmentBearer clamp with safety lock and spring tensioning. This lifting clamp is particularly suitable for lateral diagonal pull because of the gimballed attachment. The attachment can be moved in all directions, so tensile loading is possible from all sides. As a result, this type is particularly suitable for transporting long beams, profiles and steel constructions. For lateral shunt loading the load capacity is reduced as per the sketch. Paired use in the two-bar attachment is possible without spreader crosshead for longer structural steel elements.
K13 safety clamps for beam profilesType K13 with safety lock. Can be locked in open and closed position. Particularly suitable for transport of T, Double-T and U beams in vertical flange bearing. Because of their high force of pressure, these lifting clamps are excellent for turning beams.
V
H
FI
B
A
V
H
F
I
B
A
V
H
A
F
B
I
Load capacity(kg)
100025005000
10000
Type Part No.
7K12.010.0207K12.025.0307K12.050.0507K12.100.060
Dimensions approx. (mm)A
5 - 208 - 3010 - 5010 - 60
B
6085105115
F
195280360380
H
280380460600
I
85140150150
V
7585100110
10173360
Weightapprox.(kg)
Load capacity(kg)
100025004000
Type Part No.
7K13.010.0157K13.025.0307K13.040.032
Dimensions approx. (mm)A
5 - 1510 - 2710 - 32
B
709090
F
195235280
H
230310400
I
607075
V
758585
61015
Weightapprox.(kg)
Load capacity(kg)
10002500350045006000
Type Part No.
7K21.010.0207K21.025.0307K21.035.0357K21.045.0407K21.060.050
Dimensions approx. (mm)A
5 - 205 - 3010 - 3510 - 4015 - 50
B
65808595105
F
195230260320380
H
300350390450480
I
85105110120130
V
708585100100
1015313740
Weightapprox.(kg)
88 Carl Stahl LSE
LSE SAFETY CLAMPS BEAM TRANSPORT
K20 safety clamps for beam transport and storageThe beam safety clamps type K 20 are particularly suitable for horizontal beam transport and getting beams in and out of storage. It can be locked in open and closed position.
K24 safety clamps for sheet piles with remote unlockingThe safety clamps for sheet piles are suitable for turning sheet piles by 90°. It has remote unlocking, whereby the lifting clamps can be unlocked from the floor using a cable winch at big heights.
K19 inner beam clampsLifting clamps type K 19 as inward grabbing lifting clamp for wide flange beams, which are to be stacked inside one another and close together.
V
H
F
B A
I
V
H
I
BF
A
V
H
A
Load capacity(kg)
50010002500
Type Part No.
7K20.005.0157K20.010.0257K20.025.028
Dimensions approx. (mm)A
5 - 155 - 255 - 28
für Trägerbreiten
80 - 160100 - 220200 - 380
B
506070
F
130175220
H
200300400
I
426075
V
607085
5715
Weightapprox.(kg)
Load capacity(kg)
250050007000
10000
Type Part No.
7K24.025.0127K24.050.0207K24.070.0257K24.100.025
Dimensions approx. (mm)A
1 - 121 - 201 - 251 - 25
B
658595110
F
200250280330
H
350500580650
I
120155160160
V
85100120120
8182535
Weightapprox.(kg)
Load capacity(kg)
500100015003000
Type Part No.
7K19.005.0127K19.010.0167K19.015.0187K19.030.022
Dimensions approx. (mm)A
100 - 120120 - 160140 - 180180 - 220
H
220280300350
V
60707585
36812
Weightapprox.(kg)
89Carl Stahl LSE
LSE SAFETY CLAMPS SHEETS & PIPES
K22 safety clamps for sheets, profiles and pipesUniversal lifting clamps for horizontal transport of sheets, plates and profiles. The housing is slit for frontal suspension of beams. With safety lock - can be locked in open and closed position. The slope angle may only be up to max. 60° for paired use. See table on page 84 to reduce the bearing load.
V
H
B
FI
A
Load capacity(kg)/Stck.
5001000150030004000
Type Part No.
7K22.005.0257K22.010.0257K22.015.0307K22.030.0407K22.040.040
Dimensions approx. (mm)A
0 - 250 - 250 - 300 - 400 - 40
B
5050607075
F
155190210230260
H
180200260300330
I
60608090100
V
6060758595
46101518
Weightapprox.(kg)
K23 safety clamps for plates, sheets and profiles
Lifting clamps for horizontal transport of sheets, plates and profiles. Designed with safety lock. The grab cams are pressed against the sheet using spring tensioning. This guarantees a secure grip even in the event of stress relief or hitting the ground. The slope angle may only be up to 60° for paired use.
V
H
A
B
Load capacity(kg)/Stck.
50010001500200030004000
Type Part No.
7K23.005.0207K23.010.0257K23.015.0357K23.020.0407K23.030.0457K23.040.050
Dimensions approx. (mm)A
0 - 200 - 250 - 350 - 405 - 4510 - 50
B
101020253050
F
160170190220240240
H
180190230290330360
I
758095110120120
V
606075758080
569121520
Weightapprox.(kg)
k18 safety clamps for sheet boardsBearer clamps for horizontal transport of sheets and sheet boards. The grab range can quickly be adjusted from 0 - 420 mm using a locking pin. Each clamp range is 60 mm. These lifting clamps are equipped for use in pairs. The permitted lateral diagonal pull is max. 10°. The bearing force must be reduced in accordance with the slope angle (see table page 84).
H
V
I
F
B
A
Load capacity(kg)/Paar
1000150030003000300060006000
Type Part No.
7K18.010.1507K18.015.3007K18.030.1807K18.030.3007K18.030.4207K18.060.1807K18.060.300
Dimensions approx. (mm)A
0 - 1500 - 3000 - 1800 - 3000 - 4200 - 1800 - 300
B
12152020203030
F
170180200200200230230
H
250400300420550350470
I
110110120120120120120
V
25253030303030
10121214151821
Weightkg / unit
H
I
BA
F
V
90 Carl Stahl LSE
LSE SAFETY CLAMPS SCREW CLAMPS
K16 safety clamps with smooth grab plates
Bearer clamps with safety lock and smooth, large pressure plate for sheets with sensitive surfaces for vertical transport and straightening or tilting by 90°. These bearer clamps have high force of pressure. They are purely activated by gravity, but are only suitable for dry, clean and lubricant-free surfaces. From a load capacity of 2.5 t, the grab range is preadjusted using a locking screw.
K26 Screw ClampsUniversal screw clamps for lifting, turning by 180° and pulling sheets, beams and steel constructions. Equipped with mov-able, round pressure plates - result is good clamping through wedge effect.
k27 Screw ClampsScrew clamps with lateral movable suspension eyes. Designed like type K 26; particularly suitable for rolling sheets on rounding machines.
V
H
FA
B
I
I
V
H
B A
F
Load capacity(kg)
500100015002000300050006000
Type Part No.
7K26.005.0197K26.010.0307K26.015.0357K26.020.1007K26.030.0507K26.050.0807K26.060.065
Dimensions approx. (mm)A
0 - 190 - 300 - 350 - 1000 - 500 - 800 - 65
B
505565707590100
F
170200250400350400380
H
240260350380380450490
I
60607080100110120
V
60606070707580
4589102023
Weightapprox.(kg)
Load capacity(kg)
1000150030006000
Type Part No.
7K27.010.0307K27.015.0357K27.030.0507K27.060.065
Dimensions approx. (mm)A
0 - 300 - 350 - 500 - 65
B
556575100
F
200250350380
H
300400450550
I
6070100120
V
60607080
6101225
Weightapprox.(kg)
91Carl Stahl LSE
LSE SAFETY CLAMPS HORIZONTAL SHEET TRANSPORT
K17 safety clamps with protective coverBearer clamps for use in pairs of plates and sheets with sensitive surfaces. The pressure plate is equipped with a protective cover.
Pair capacity(kg)
250500
10002500
Type Part No.
7K17.002.0307K17.005.0307K17.010.0407K17.025.050
Dimensions approx. (mm)A
0 - 300 - 300 - 400 - 50
B
10121520
F
150160200220
H
100120160180
I
100100130130
V
17171725
35710
Wight kg / unit
V
H
A
I
V
H
A
I
F
B
K15 safety clamps for horizontal sheet transportThese lifting clamps are equipped for use in pairs. Particularly suitable for transporting stable sheets, sheet boards and steel plates. The serration of the pawl ensures secure grab of the sheets even on a diagonal slope. We recommend 2-pair bearer clamps combined with a cross-head for long sheets. The bearing load is reduced with a slope angle greater than 60°.
K15 safety clamps for horizontal sheet transportThese lifting clamps are equipped for use in pairs. They have a large grab range and, therefore, are very well suited to trans-porting thick and fine sheet boards.
VL
B
I
CF
A
V
A
B
I
F
Pair capacity(kg)
250025005000500050007500
Type Part No.
7K15.025.1007K15.025.1507K15.050.1007K15.050.1507K15.050.2507K15.075.250
Dimensions approx. (mm)A
5 - 10050 - 1505 - 10050 - 150100 - 250100 - 250
B
151520303050
F
230230250270270290
I
140140140165165170
V
252531313136
131520253035
Wight kg / unit
Working angle
30°- 60°60°- 90°90°-120°
Load capacity
100 %70 %50 %
Caution:With lifting clamps for horizontal transport, the load capacity is reduced in accordance with the working angle. This applies to alltypes.
92 Carl Stahl LSE
LSE SAFETY CLAMPS CONCRETE PIPE CLAMPS
B
A
K28 concrete pipe attachmentThe 3-leg concrete pipe attachment is suitable for vertical transport of concrete rings.
The grab range can be adjusted using locking pins.
Load capacity(kg)
150030003000
Type Part No.
7K28.015.1207K28.030.1807K28.030.220
Dimensions approx. (mm)A max.
120180220
B
170260260
Grab range
40 - 12050 - 18090 - 220
406075
Weightapprox.(kg)
93Carl Stahl LSE
FAX ENQUIRY FORM TONGS
Required load suspension equipment:
Description of the load (indicate material):
Weight (kg) min. max.
Length (mm) min. max.
Width (mm) min. max.
Height (mm) min. max.
Outside diameter (mm) min. max.
Inside diameter (mm) min. max.
Information on Load
Information on Lifting Gear
Information on Load Suspension Devices
Load position ❐ horizontal load movement ❐ lifting horizontal ❐ vertical ❐ ° rotation
Load surface ❐ dry – pressure sensitive ❐ dry – not pressure sensitive ❐ wet – pressure sensitive ❐ wet – not pressure sensitive
Option of ❐ by clamping ❐ by wrap-aroundload pick-up
Crane hook ❐ simple hook no. ❐ double hook no. DIN 15041 DIN 15042
❐ overhead crane load capacity t
❐ portal crane lifting height m
Operating mode ❐ with ratchet lever ❐ with automatic step mechanism
Dimensions for width F max. mm internal height I max. mmfig. 1 and fig. 2 structural height H max. mm jaw C x C mm
Width F max. mm
Suspension eye height V max. mm width B max. mm
Type of existingcrane
To:
Carl Stahl Nordgreif GmbH
Tel: 040 / 8 39 15 26Fax: 040 / 8 39 14 27Email: [email protected]
Sender:
Contact person:Tel.: Fax:e-mail:
94 Carl Stahl LSE
FAX ENQUIRY FORM CROSSHEADS
Main beam
Cross beam
Traversen Aufhängungen Traversen AbhängungenLifting eye types Hook types
Type 1 ❏
Type 4❏ Type 5❏ Type 6❏
Type 2 ❏ Type 3 ❏ Type 1 ❏
Type 4❏ Type 5❏ Type 6❏
Type 2 ❏ Type 3 ❏
Load capacity kg
Grid n° mm(RL n° x mm)L min mm
L max mm
Grid n° mm(RB n° x mm)B min mm
B max mm
Lifting eye
Other Information
Other Requirements
Height H max. mm Width B max. mm Hook-no:
H1 = max. height main lifting beam mm
H2 = overall height mm
Tragfähigkeit
RL Lmin.
Lmax.
H1
H2
RBBmin.
Bmax.B
H
To:
Carl Stahl Nordgreif GmbH
Tel: 040 / 8 39 15 26Fax: 040 / 8 39 14 27e-mail: [email protected]
Sender:
Contact person:Tel.: Fax:e-mail:
Load capacity
Main Beam
Cross Beam
95Carl Stahl LSE
FAX ENQUIRY FORM COIL HOOKS
Type 1 ❏
C-hook types
C-hooks dimensionsMain dimensions
Load capacity
RM = grid dimensions
A = supporting surface
AB = supporting width
B = coil length
I = coil inside height
Lifting eye
H1 = max. heightof the C-hook
Z = prong width
Area of Application
Other requirements
mm C = prong height mm
mm
kg
number
mm
mm
mm
mm
mm spacing
Type 4 ❏ Type 5 ❏ Type 6 ❏
Type 2 ❏ Type 3 ❏
C
B
H
H1
AB
A
I
To:
Carl Stahl Nordgreif GmbH
Tel: 040 / 8 39 15 26Fax: 040 / 8 39 14 27e-mail: [email protected]
Sender:
Contact person:Tel.: Fax:e-mail:
Height H max. mm Width B max. mm C-hook-no.:
Carl Stahl Nordgreif GmbH
Achter de Weiden 12D-22869 Schenefeld / Hamburg
Tel.: +49 (0) 40 / 839 15 26Fax: +49 (0) 40 / 839 14 27
Email: [email protected]: www.carlstahl-nordgreif.de
Issue 2 / 2008
© Copyright by Carl Stahl GmbH 2008. Our current Terms and Conditions of Sale, Delivery and Payment apply.
Please request as needed.All rights reserved. It is forbidden to reprint this brochure including extracts.
Your partner
LOAD SUSPENSIONEQUIPMENT