LOAD RETRACT LOCK - CARiD.com
Transcript of LOAD RETRACT LOCK - CARiD.com
LOAD.RETRACT.
LOCK.
With a Pace Edwards Retractable Truck
Bed Cover, you have the option of riding
with an open truck bed or with a secure,
locked cover for your cargo. And in addition
to security, a Pace Edwards cover increases
your fuel efficiency by improving the
aerodynamics of your truck. All Pace
Edwards covers roll and stow inside a
tough, protective canister behind the cab
ROLL OPEN ROLL CLOSED with quick, clamp-on installation.
These rugged covers are designed
to accommodate fifth-wheel hitches
with plenty of room left over to store
tools and extra cargo. Installed and
serviced by North America’s largest
dealer network, Pace Edwards
retractable covers are covered by our
industry-leading warranties.
INSTALL. REMOVE. REPEAT.
SWITCHBLADE™
• Install quickly and easily
• Remove just as easily for full bed access
• Retracts in seconds
• Solid cover security
• Allows full rear visibility
• No bulky panels
• Requires only a Phillips screwdriver and
7/16" wrench to install and remove
• One-year warranty
TOUGH, COATED ALUMINUM DECK
FULL-METAL™ JACKRABBIT®
• Retracts into a canister box at the front of the
truck bed when you turn the lock knob
• Tough, powder-coated aluminum exterior
• Easy maintenance — low-profile design
• Closes easily with a built-in pull strap — can be
key-locked along the rail every 12 inches
• Clamps come standard on most applications
(no drill required) — watch the videos online!
• Three-year warranty
HARD-COVER SECURITY, SOFT-TOP LOOK.
THE ORIGINAL JACKRABBIT ®
• Retracts into a canister box at the front of the
truck bed when you turn the lock knob
• Strong aluminum panels with ArmorTek
automotive-grade, polymer-vinyl exterior
• Low-profile design
• Closes easily with a built-in pull strap — can be
key-locked along the rail every 12 inches
• Clamps come standard on most applications
(no drill required) — watch the videos online
• Three-year warranty
TOTAL REMOTE CONTROL
BEDLOCKER® ELECTRIC • Hands-free, remote operation
• Powerful electric motor wires to your truck battery
• Cover opens/closes in less than 30 seconds — can
stop at any point
• Heavy-duty, powder-coated aluminum exterior
with low-profile blanket design
• Retracts into a canister box at the front of the
truck bed
• Manual override release lever provides back up
in case of lost remotes or dead batteries
• No-drill installation
• Three-year warranty
ACCESSORIES TO MAKE YOUR COVER FIT YOU
EXPLORER SERIES™ RAILS• Increase cargo capacity above the cover• Fits many brands of racking components
CONTRACTOR RIG RACK• Aluminum extension beams
support longer loads• Durable stainless steel fasteners
on all components
UTILITY RIG RACK• Aluminum trusses for exceptional
front-to-rear stability• Durable stainless steel
fasteners on all components
POWERGATE™
ELECTRIC TAILGATE LOCK • Locks tailgate when doors are locked• Easy plug-and-go wiring harness
WEATHERGATE™
TAILGATE SEAL • Rubber seal keeps dirt and moisture out• Fits all makes and models
CUSTOMIZE YOUR RIDE
Armor Tek Vinyl over aluminum panel
Powder coated aluminum extrusion
Powder coated aluminum extrusion
Armor Tek Vinyl over aluminum panel
WHAT DO YOU NEED TO
DO TODAY?
by
Total Remote Control
BEDLOCKER® ELECTRIC • Hands-free, remote operation• Powerful electric motor wires to your truck battery• Cover opens/closes in less than 30 seconds —
can stop at any point• Heavy-duty, powder-coated aluminum exterior
with low-profile blanket design• Manual override release lever provides back
up in case of lost remotes or dead batteries
• Three-year warranty
Tough, Coated Aluminum Deck
FULL-METAL™ JACKRABBIT® • Retracts into a canister box at the front of the
truck bed when you turn the lock knob• Tough, powder-coated aluminum exterior• Easy maintenance — low-profile design• Closes easily with a built-in pull strap — can be
key-locked along the rail every 12 inches
• Three-year warranty
Hard-Cover Security, Soft-Top Look
THE ORIGINAL JACKRABBIT® • Retracts automatically into a canister box at the
front of the truck bed when you turn the lock knob• Strong aluminum panels with ArmorTek
automotive-grade, polymer-vinyl exterior• Closes easily with a built-in pull strap — can be
key-locked along the rail every 12 inches• Clamps come standard on most applications
(no drill required) — watch the videos online
• Three-year warranty
ALSO FROM PACE EDWARDS
INSTALL Easy, quick installation; requires only a Phillips screwdriver and 7/16" wrench
REMOVEEasily removed any time for full-bed access
REPEAT Install and remove depending on your needs
ALLOWS FULL REAR VISIBILITY | NO BULKY PANELSSOLID COVER SECURITY | RETRACTS IN SECONDS
Switchblade™ is designed for quick
and easy installation and removal.
Its design makes it the ideal truck
bed cover for people who want
secure cargo space some of the
time and full bed access the rest
of the time. Switchblade™ requires
only a Phillips screwdriver and 7/16”
wrench for installation and removal.
One-year warranty.
THE SWITCHBLADE™ INSTALLATION KIT INCLUDES:• Canister
• Two drain tubes
• Two side rails
• Two locator bolts
• Four screws
• Four rail clamps
INSTALLATION INSTRUCTIONS1. Center canister on truck rails
and push completely forward.
2. Position rail against the side of
the truck’s interior bed rail.
3. Slide clamps into the notches in
the rail and tighten.
4. Tighten locator bolts.
5. Position the top cover on the
canister and mount with four
screws.
EASY TO INSTALLCANISTER
SIDE RAIL
LOCATOR BOLT
RAIL CLAMP
WORKS AS HARD
AS YOU
With a Pace Edwards Retractable Truck
Bed Cover, you have the option of riding
with an open truck bed or with a secure,
locked cover for your tools. And in addition
to security, a Pace Edwards cover increases
your fuel efficiency by improving the aero-
dynamics of your truck.
ROLL OPEN ROLL CLOSED All Pace Edwards covers roll and stow
inside a tough, flush-fitting canister behind
the cab with quick, clamp-on installation.
Installed and serviced by North America’s
largest dealer network, Pace Edwards
retractable covers are covered by our
industry-leading warranties.
These premium retractable truck bed covers work with our commercial rack systems when combined with Pace Explorer series rails:
Tough, Coated Aluminum Deck
FULL-METAL™ JACKRABBIT® • Tough powder-coated aluminum exterior
• Easy maintenance – low-profile design
• Retracts into a canister box at the front of the
truck bed when you turn the lock knob
Total Remote Control
BEDLOCKER® ELECTRIC • Hands free – remote operation
• Cover opens/closes in less than 30 seconds –
can stop at any point
• Heavy-duty, powder-coated aluminum exterior
with low-profile blanket design
• Retracts into a canister box at the front of the
truck bed
• Wires to truck battery; manual override release
provides back up
Hard-Cover Security, Soft-Top Look
THE ORIGINAL JACKRABBIT® • Retracts into a canister box at the front of the
truck bed when you turn the lock knob
• Strong aluminum panels with ArmorTek
automotive-grade, polymer-vinyl exterior
• Low-profile, flush-fit design
• Closes easily with a built-in pull strap — can
be key-locked along the rail every 12 inches
Clamps come standard for no-drill installation on most models.
UTILITY RIG RACK SYSTEM WITH JACKRABBIT®
• Aluminum trusses for exceptional front-to-rear stability
• PVC insert on rig crossmember reduces friction
when loading and unloading
• Durable stainless steel fasteners on all components
• Removable rear truss for hauling large items
EXPLORER SERIES™ RAILS• Increase cargo capacity above the cover
• Fits many brands of racking components
• Accommodates Pace Edwards utility and
contractor racks
CONTRACTOR RIG RACK WITH FULL METAL™ JACKRABBIT®
• Aluminum extension beams support longer loads
• Durable stainless steel fasteners on all components
• Rust-proof system with removable rear cross member
and adjustable handles
• Four work winches included
WORK WINCH™
Tough tie-down system secures large loads to the
Contractor Rig Rack
RETRACTABLE UTILITY BED COVERAvailable in Manual & Electric
• Designed specifically for service-body
applications, fits most 8’ and 9’ models
• Made of tough, black, powder-coated
aluminum panels, interlocked for strength
and durability
• Cover retracts into a front canister for
easy access to the truck bed
• Fully secure when closed, even when
the tailgate is unlocked
ELECTRIC COVER FEATURES
• Electromagnetic brake locks the cover
in any position
• Drive system release mechanism for opening
during a power failure or emergency
• Patented silicone weather hinge provides
a tight seal between aluminum panels
• Operating switch can be in the cab, an
exterior locking compartment or both
MANUAL COVER FEATURES
• Heavy-duty spring helps retract the
cover smoothly
• Built-in pull strap engages the latch
at 12” intervals
• Independent latch and lock handle system
offset to driver side
A SMARTER WAY TO WORK Durable Pace Edwards Commercial
Fleet Products are reliable and
efficient truck solutions that are
versatile and secure. Lock up tools
and equipment under the cover, or
carry oversized cargo with the cover
retracted. Transport other cargo or
building materials with our rugged
rack systems, specifically designed to
work with the BedLocker®, Full-Metal™
JackRabbit® and the JackRabbit®
Retractable Truck Bed Covers.
Full-Metal JackRabbit’s tough, black powder-coated alumi-num deck is constructed with interlocking silicone hinges for strength and flexibility.
JackRabbit’s weather resis-tant, ArmorTek™ deck provides hard cover security with a “soft top” look.
INSTALL. REMOVE. REPEAT.
SWITCHBLADE™
• Install quickly and easily
• Remove just as easily for full bedaccess
• Retracts in seconds
• Solid cover security
• Allows full rear visibility
• No bulky panels
• Requires only a Phillips screwdriver and7/16” wrench to install and remove
• One-year warranty
TOTAL REMOTE CONTROL
BEDLOCKER® ELECTRIC • Hands-free, remote operation
• Powerful electric motor wires to yourtruck battery
• Cover opens/closes in less than 30seconds — can stop at any point
• Heavy-duty, powder-coated aluminumexterior with low-profile blanket design
• Retracts into a canister box at the frontof the truck bed
• Manual override release lever providesback up in case of lost remotes ordead batteries
• No-drill installation
• Three-year warranty
LOAD. RETRACT. LOCK.FOUR RETRACTABLE COVERS TO FIT THE WAY YOU WORK.
SWITCHBLADE™
BEDLOCKER® ELECTRIC
FULL-METAL™ JACKRABBIT®
THE ORIGINAL JACKRABBIT®
TOUGH, COATED ALUMINUM DECK
FULL-METAL™ JACKRABBIT® • Retracts into a canister box at the
front of the truck bed when you turnthe lock knob
• Tough, powder-coated aluminum exterior
• Easy maintenance — low-profile design
• Closes easily with a built-in pull strap —can be key-locked along the rail every12 inches
• Clamps come standard on mostapplications (no drill required) —watch the videos online
• Three-year warranty
HARD-COVER SECURITY, SOFT-TOP LOOK
THE ORIGINAL JACKRABBIT®
• Retracts into a canister box at thefront of the truck bed when you turnthe lock knob
• Strong aluminum panels with ArmorTekautomotive-grade, polymer-vinyl exterior
• Low-profile design
• Closes easily with a built-in pull strap —can be key-locked along the rail every12 inches
• Clamps come standard on mostapplications (no drill required) —watch the videos online
• Three-year warranty
Armor Tek Vinyl over aluminum panel
Armor Tek Vinyl over aluminum panel
Powder coated aluminum extrusion
Powder coated aluminum extrusion
UTILITY RIG RACK• Available with JackRabbit® and Full-Metal JackRabbit
• Aluminum trusses for exceptional front to rear stability
• Durable stainless steel fasteners on all components
• PVC insert on rig crossmember reduces friction whenloading and unloading
• Removable rear truss for hauling large items
• Three-year warranty
CONTRACTOR RIG RACK• Available with JackRabbit® and Full Metal JackRabbit®
• Aluminum extension beams support longer loads
• Durable stainless steel fasteners on all components
• Rust-proof system with removable rear cross member andadjustable handles
• Four work winches included
• Three-year warranty
ACCESSORIES TO MAKE YOUR COVER FIT YOU
BedLocker/Full Metal Jack Rabbit Heavy duty powder coated aluminum exterior
EXPLORER SERIES RAILS• Increase cargo capacity above the cover
• Fits many brands of racking components
• Accommodates Pace Edwards Utility andContractor racks
Switchblade/Jack Rabbit Strong aluminum panels with ArmorTek automotive-grade, polymer vinyl exterior
• Install quickly and easily
• Remove just as easily forfull bed access
• Retracts in seconds
• Solid-cover security
• Allows full rear visibility
• No bulky panels
• One-year warranty
INSTALL. REMOVE. REPEAT.
by
SWITCHBLADE™ KIT INCLUDES:• Canister
• Two drain tubes
• Two side rails
• Two locator bolts
• Four screws
• Four rail clamps
INSTALLATION INSTRUCTIONS1. Center canister on truck rails
and push completely forward.
2. Position rail against the side ofthe truck’s interior bed rail.
3. Slide clamps into the notches inthe rail and tighten.
4. Tighten locator bolts.
5. Position the top cover on thecanister and mount with fourscrews.
Switchblade is the ideal truck bed cover for people who want secure cargo space some of the time, and full-bed access the rest of the time. Not only are installation and removal fast, they require only a Phillips screwdriver and 7/16" wrench.
DESIGNED FOR EASY INSTALLATION AND REMOVAL, ANY TIME.
YEAR MODELBEDLENGTH BOX
COMPLETEKIT PART #
CANISTER PART #
RAIL PART #
CHEVY/ GMC 2015 Colorado/Canyon Crew Cab 5' 2" XSB SWCA03A25 SW2105 SW5125
2015 Colorado/Canyon 6' 2" SB SWCA04A26 SW2104 SW5126
88-13 C/K/Silverado, Heavy Duty^, & '14 Heavy Duty 6' 6" SB SWC0303 SW2003 SW5003
88-13 C/K/Silverado, Heavy Duty^, & '14 Heavy Duty 8'0" LB SWC0404 SW2004 SW5004
04-15 Silverado 1500 Crew Cab 5' 8" XSB SWC3250 SW2032 SW5050
14-15 Silverado/Sierra 1500 + 2015 Heavy Duty 6'6" SB SWC95A17 SW2095 SW5117
14-15 Silverado/Sierra 1500 + 2015 Heavy Duty 8'0" LB SWC96A18 SW2096 SW5118
DODGE 09-15 Ram 1500 CREW CAB 5' 6" XSB SWD77A01 SW2077 SW5101
09-15 Ram 6' 3" SB SWD7833 SW2078 SW5033
09-15 Ram 8'0" LB SWD7936 SW2079 SW5036
02-08 Ram & '09 Ram 2500/3500 6' 2" SB SWD2233 SW2022 SW5033
02-08 Ram & '09 Ram 2500/3500 8' LB SWD2336 SW2023 SW5036
FORD 04-14 Super Crew / SuperCab 5' 6" XSB SWF2843 SW2028 SW5043
97-14 F-Series LightDuty 6' 5" SB SWF29A20 SW2029 SW5120
97-14 F-Series LightDuty 8' LB SWF3042 SW2030 SW5042
08-15 F-Series Super Duty 6' 9" SB SWF6985 SW2069 SW5085
08-15 F-Series Super Duty 8' 1" LB SWF7084 SW2070 SW5084
2015 F-Series LightDuty 6' 5" SB SWFA06A29 SW2106 SW5129
2015 F-Series LightDuty 8' LB SWFA07A30 SW2107 SW5130
2015 Super Crew / SuperCab 5' 6" XSB SWFA05A28 SW2105 SW5128
TOYOTA 07-15 Tundra CrewMax (*2) 5' 5" XSB SWT5379 SW2053 SW5079
07-15 Tundra Regular & Double Cab (*2) 6' 5" SB SWT5173 SW2051 SW5073
07-15 Tundra Regular & Double Cab (*2) 8' LB SWT5274 SW2052 SW5074
05-15 Tacoma Double Cab 5' 1" XSB SWT7475 SW2074 SW5075
05-15 Tacoma Regular and Access Cab 6' 2" SB SWT9854 SW2098 SW5054
NISSAN 05-15 Nissan Frontier 4' 10" XSB SWN5780 SW2057 SW5080
KIT CONTAINS
HD = Heavy Duty (*2) Will impede the use of the optional factory cargo management system ^ Excludes composite box
SECURE. ACCESSIBLE. RUGGED.
AVAILABLE IN MANUAL & ELECTRIC• Designed specifi cally for service body applications,
fi ts most 8' and 9' models: longer applications available
• Made of tough, black, powder-coated aluminum
panels, interlocked for strength and durability
• Cover retracts into a front canister for easy
access to the utility bed
• Works with or without tailgate.
RETRACTABLE UTILITY BED COVER
ELECTRIC COVER FEATURES• Electromagnetic brake locks the cover in any position
• Drive system release mechanism for opening during a
power failure or emergency
• Patented silicone weather hinge provides a tight seal
between aluminum panels
• Operating switch can be in the cab or exterior locking
compartment or both
MANUAL COVER FEATURES• Heavy-duty spring helps retract the cover smoothly
• Built-in pull strap engages the latch at 12” intervals
• Mechanical weather hinge provides a tight seal between
aluminum panels
• Independent latch and lock handle system o� set to
driver side
THE PACE EDWARDS VERTICAL DOOR SYSTEMAn alternative for fleet managers, commercial truck upfitters and truck body manufacturers
An efficient, versatile option for all delivery and service vehicles, the Pace Edwards electric
Vertical Door System offer advantages over traditional hinged and pocket doors. Designed
with interlocking, retractible aluminum extrusion technology, these doors enhance safety for
drivers and operate more efficiently, helping you improve delivery times.
FEATURES
• Interlocking aluminum panels
• Powerful, reliable motorized operationwith manual override
• Available for 12V and 24V electrical systems
• 3-way control: At the door, in the cab, byremote keyfob
• High-speed operation: Fully open or closedin seconds
• Electromechanical brake
• Retracts into a compact, self-containedoverhead canister
• Easy-access service panel
• Custom sizes: fits a wide rangeof applications
• Bump stop protects personnel and cargo
• Rain management drip rail
• Door-open alarm
ADVANTAGES
• Vertical door is unaffected by gusts of windand does not swing into traffic
• Safer access – no door blocking movementor line of sight
• Better for confined spaces
• Frees hands for delivery tasks
• Lightweight aluminum reduces weight andsaves fuel
• Electric operation reduces driver strain anduse injuries
Service body and pick up applications are also available.
QUICK, EASY ACCESS REDUCES DELIVERY TIMES