RADIOGRAPHIC TESTING WITH LO-RAD EQUIPMENT

Lo-Rad is a flexible system which fits any shape and size of steel or pipe work.Lo-Rad operates efficiently under varying temperature conditions -50 to 120 Degrees CelsiusLo-Rad system is easily attached to any specimen due to the patented self adhesive envelopesLo-Rad system allows you to use your existing and standard radiographic equipment, Techops 660, 880 Gammamat TI, TIF etc

Lo-Rad Features

Complete System

The case will hold the following

Mazel mats with envelopesPrimary beam Mazel mats & envelopeMazel Outer and standard inner guide tubeCollimatorEllipse standFlash boxThe system is easily transported on site. The unit is waterproof and has castor wheels for maneuverability and storing.

Lo-Rad Mazel Mats

915 x 305 x 9.5mm11.3kgLead equivalent of 3.3mmSpecificationsFlexible!!!

Self Adhesive Mats & Ellipse Stand For work on 2 Inch pipe work - DWDIAllows for required SFD

Mazel Guide Tube & Collimator

39mm od 19 mm id 8 kgMax Temp 120 DegLength 1.5mSpecificationsTungsten CollimatorStandard Guide TubeMazel Guide Tube ShieldFlexible!

Mazel Flash Box

Flash Box weight 11KgSpecifications

The Mazel Flash Box is designed to reduce any flash radiation which might be emitted when the source is wound out

Step by StepStep 1Attach Guide Tube to Isotope/ContainerStep 2Insert Isotope/Container into Flash BoxStep 3Attach collimator to weld or specimenStep 4Enclose collimator and weld with Mazel MatsStep 5Expose Weld

CONTACTThank you for your time