8/13/2019 LMAN0008-01

1/4

LMAN0008-01-EN

ETG-LRP DATA SHEET

10/24/2013 No part of this publication may be reproduced without the prior agreement and written permission of Horner Lighting Group, LLC. Information in this document is subject to change without notice. Page 1o

ETG-LRP Series4 LED Remote Phosphor Linear Low Bay and High Bay Lighting

1. INTRODUCTION

Advanced LED Remote Phosphor (LRP) lighting provides superior efficacy, reduced glare, and even lightingoutput. These lighting products are designed for indoor facility lighting, ranging from 15-60 ceilings, such asindustrial or retail applications. The LRP series glass-free, long lifetime, dimmable design make it a greatlighting solution in many different settings.

2. SPECIFICATIONS

Table 1General Product and Operating Characteristics

ModelCRI

*Red EnhancementCCT Lumens

*estimateTotal Watts Lumens/Watt Replacements

ETG-LRP10608090*

5000K5000K

*6000K*5700K

6060

10095

4 Tube T12150W (HID)

ETG-LRP21608090*

5000K5000K

*15000K*14250K

150150

10095

6 Tube T8400W (HID)

ETG-LRP32408090*

5000K5000K

*24000K*22800K

240240

10095

6 Tube T5400W (HID)

ETG-LRP43208090*

5000K5000K

*30000K*28500K

300300

10095

700W (HID)700W (HID)

ETG-LRP64808090*

5000K5000K

*48000K*45600K

480480

10095

1000W (HID)1000W (HID)

Figure 1 - 2 tube LRP with reflector shown

8/13/2019 LMAN0008-01

2/4

LMAN0008-01-EN

ETG-LRP DATA SHEET

10/24/2013 No part of this publication may be reproduced without the prior agreement and written permission of Horner Lighting Group, LLC. Information in this document is subject to change without notice. Page 2o

Table 2Characteristics

Light and Electrical Characteristics

Fixture Watts 60-480WDimming 0-10V > 5%

Ambient Temperature -40C45C

AC Power 100277 VAC or 277-480 VAC

DC Power 48V DC

IP Rating IP65

Fixture Weight 1 Tube3.53 lbs., 2 Tube7.30 lbs., 3 Tube10.9 lbs., 4Tube14.6 lbs., 6 tube21.8 lbs.

Mounting Hook, Cable, or Chain. Recommend ETG-YSM-05 Y cables.

Warranty 5 Years

3. PHOTOMETRICS

Figure 4 - Aisle Candela Polar Plot Figure 3 - High Bay Candela Polar Plot Figure 2 - Low Bay Candela Polar Plot

8/13/2019 LMAN0008-01

3/4

LMAN0008-01-EN

ETG-LRP DATA SHEET

10/24/2013 No part of this publication may be reproduced without the prior agreement and written permission of Horner Lighting Group, LLC. Information in this document is subject to change without notice. Page 3o

Figure 5 - CRI Red Enhancement

4. DIMENSIONS

5. PART NUMBER OPTIONS

Choose oneoption from each of the following columns to specify light:

Model Power Supply Automation Color

ETG-LRP10601 TubeETG-LRP2160 2 Tube

ETG-LRP3240 3 Tube

ETG-LRP4320 4 Tube

ETG-LRP6480 6 Tube

-P1

110-227V AC-P2277-480V AC

-P348V DC

-A1Motion Detection-A2Ambient

-A3Ambient & Motion

-1

5000K / 80 CRI-2 4000k / 80CRI

-3 5000K / 90 CRI Red

-44000K / 90 CRI Red

8/13/2019 LMAN0008-01

4/4

LMAN0008-01-EN

ETG-LRP DATA SHEET

10/24/2013 No part of this publication may be reproduced without the prior agreement and written permission of Horner Lighting Group, LLC. Information in this document is subject to change without notice. Page 4o

Choose oneof the following reflector sets to come with the light fixture:

Reflectors Model Number

15-30 Feet Low Bay Reflector ETG-LBR1

30-60 Feet High Bay Reflector ETG-HBR1

20-40 feet Aisle Reflector ETG-ABR1

6. PRECAUTIONS

WARNINGRisk of electrical shock. Disconnect power before servicing or installing product.

WARNINGRisk of injury or damage. Unit will fall if not installed properly. Follow installation instructions .

CAUTIONRisk of injury. Wear safety glasses and gloves during installation and servicing.

This luminaire is designed to be used in ambient temperatures of -40C to +45C (-40F to +113F) and be mounted horizontally with

the light source down as shown above. This luminaire should be installed indoors and not in areas with limited ventilation or high

ambient temperatures.

Mounting SpecificationsWeight: 1 Tube3.53 lbs., 2 Tube7.30 lbs., 3 Tube10.9 lbs., 4 Tube14.6 lbs., 6 tube21.8 lbs.

UnboxingOur packaging is designed to protect the luminaire during shipping. Please inspect to confirm it was not damaged.

HandlingOnce unpacked, the luminaire can become damaged if mishandled. Do not stack luminaires after unpacking. Protect the remote

phosphor plate from scratching.

7. TECHNICAL SUPPORT

Tel: (317) 916-4274 | Fax: (317) 639-4279 | Web:http://www.heapg.com | Email:techsppt@HornerETG.com

http://www.heapg.com/http://www.heapg.com/http://www.heapg.com/mailto:techsppt@HornerETG.commailto:techsppt@HornerETG.commailto:techsppt@HornerETG.commailto:techsppt@HornerETG.comhttp://www.heapg.com/