LM6501 User manual

ALL IN ONE CAR DVD PLAYER ALL IN ONE CAR DVD PLAYER

WITH 7" TFT LCD TOUCH SCREENWITH 7" TFT LCD TOUCH SCREEN

LM6501LM6501User ManualUser Manual

LM6501

2006 LM Corporation

Contents

Precautions

On Safety

On Installation

Moisture Condensation

About the LCD Panel

How to Use Touch Screen

How to Use Remote Control

How to Use Battery

Playable Discs

DVD Player and Care

DVD Discs

CD-R/CD-RW Discs

MP3 FILES

Touch Screen Keys

Host Keys

Remote Control Keys

Basic Operations

Turn On/Off

SRC

System Menu Settings

Volume Adjusting

Reset Factory Settings

DVD Playing

DVD Settings

General Settings

Audio Settings

Video Settings

Inital Settings

Password settings

CDC Playing

Radio Operation

TV Operation

Listening to MP3

Connections

Troubleshooting

Specifications

Accessories

30

31

33

33

1

1

1

2

2

3

3

3

4

4

5

5

6

7

7

8

10

10

10

11

13

13

14

18

18

19

21

22

24

25

27

28

29

Precau

tion

s

Precautions

Thank you for purchasing this car multimedia entertainment.

1 Do not install the unit in a spot exposed to direct sunlight

or excessive heat or the possibility of water splashing.

2 Do not touch the liquid crystal fluid if the LCD is

damaged or broken due to shock. The liquid crystal fluid

may be dangerous to your health or even fatal. If the liquid

crystal fluid from LCD contacts your body or clothing, wash

it off with soap immediately.

3 Do not wipe the panel with a stiff cloth or a cloth

dampened by volatile solvents such as paint thinner and

alcohol.

4 If the monitor touches an obstacle while it is being

raised/lowered, the monitor will stop automatically. Should

this occur, remove the obstacle first and then continue the

operation.

Before operating the unit, read this manual thoroughly and

keep it handy for future reference.

To avoid injury or accident, read the following precautions

before installing and operating the unit.

On Safety

Comply with your local traffic rules and regulations.

Where to install

Before installing this unit, please check your local traffic

rules and regulations.

Do not install this unit where:

- It will obstruct the driver's view.

- It will obstruct the operation of the airbag system.

- It will obstruct the operation of the vehicle, especially the

steering wheel, shift lever, or brake pedal.

5 If the unit does not seem to be working right, try pressing

the reset button first. If that does not solve the problem,

consult your supplier.

6 When replacing the fuse, be sure to use one matching the

amperage rating stated on the original fuse. Using a fuse

with the wrong rating many cause your unit to malfunction.

7 Please remember to wear your seat belt at all times while

operating your vehicle. If you are ever in an accident, your

injuries can be considerably more severe if your seat belt is

not properly buckled.

8 When disposing of used units, please comply with

governmental regulations or environment public institution's

rules that apply in your country/area.

On installation

1 )Installing this unit requires technical expertise. This unit

should be installed by a qualified technician or service

personnel.

2 )If you try to install this unit by yourself, do it properly,

referring to the installation and wiring diagrams in this

operating manual. Improper installation may result in fire or

electric shock.

3 )Before installation, be sure to turn the ignition switch to

the OFF position or take the key out. Installing this unit with

the ignition on may cause battery drain or a short circuit.

4 )Do not damage any pipes, tubes, the fuel tank or electric

wiring when installing this unit. This can cause a fire. If you

drill a hole in car panels, make sure that any hidden car parts

will not be damaged.

5 )Do not use any nuts or bolts for safety devices such as

steering linkage, fuel supply or braking systems. This can

cause a fire or an accident.

Precau

tion

s

Moisture condensation

If the ambient temperature of the unit changes rapidly, moisture

condensation may occur inside the display window. Wait for a

while, until the moisture condensation evaporates and unit

returns to normal.

About the liquid crystal display (LCD) panel

Do not press on the LCD panel on the unit as doing so can

distort the picture or cause a malfunction. The picture may

become unclear, or the LCD panel may be damaged.

Notes on cleaning

- Clean the LCD panel with a slightly damp soft cloth.

- Do not use solvents such as benzine, thinner,

commercially available cleaners or antistatic spray.

Do not use the unit in temperatures under 5 or even 45 .

If your car was parked in a cold or hot place, the picture

may not be clear. The monitor is not damaged. The picture

will become clear after the temperature in your car becomes

normal.

Some stationary blue or red dots may appear on the monitor.

These are called bright spots, and can happen with any LCD.

The LCD panel is highly sophisticated, and more than

99.99% of the segments used in the panel are flawless.

However, there is a possibility that less than 0.01% of the

segments are defective and may not light up properly.

Point the remote control in the direction of the front panel

to operate.

The remote control may not function properly in direct

sunlight.

Do not store the remote control in high temperatures or

direct sunlight.

Do not let the remote control fall onto the follow, where it

may become jammed under the brake or accelerate pedal.

Use and care of the remote controlInstalling the battery

Slide the tray out on the back of the remote control and insert

the battery with the plus (+)and minus (-)poles pointing in

the proper direction.

Use only one CR2025 (3V) lithium battery.

Remove the battery if the remote control is not used for a month or longer.

Do not recharge, disassemble, heat or dispose of the battery in fire.

How to use lithium battery

1 )

2 )

3 )Do not handle the battery with metallic tools.

4 )Do not store the battery with metallic tools.

5)In the event of battery leakage, wipe the remote control completely clean and install a new battery.

6)When disposing of used batteries, please comply with governmental regulations or environmental public institution's rules that apply in your country/area.

7)Keep the battery out of the reach of children, Should be swallowed, immediately consult a doctor.

Precau

tion

s

3

13

2

TrayA

B

Back of the remote

Lithium Battery

When using for the first time,

pull out the film protruding from the tray.

How to use Touch Screen

Touch Screen is solid and reliable, however, one should

still keep the following in mind

1 Do not scrape the screen hard, slight touching is enough;

2 Touch Screen is not water-proof. In extreme case, water

will enter the circuit through panel

3 Touch Screen includes a glass component, do not knock

or press it hard

4 Keep the screen from high temperature, dust and

humility.

Don't use alcohol to clean the screen.

Playable discs

DVD, Video CD and CD discs that display the logos shown

below can be played back on this player.

Video CD CD

DVD audio DVD video

DVD video disc region numbers

DVD video discs that have incompatible region numbers

cannot be played on this player.

( This unit is for zero region.)

Use only normal, round discs. If you insert irregular, non-round, sharp discs they may jam in the DVD player or not play properly.

Check all discs for cracks, scratches or warped discs before playing. Discs that have cracks, scratches or are warped may not play properly. Do not use such discs.

Avoid touching the recorded(non-printed side) surface when handling the disc.

Store discs in their cases when not in use.

Keep discs out of direct sunlight and do not expose the discs to high temperatures.

Do not attach labels, write on or apply chemicals to the surface of the discs.

To clean dirt from a disc, wipe the disc with a soft cloth outward from the center of the disc.

If the heater is used in used in cold weather, moisture may form on components inside the DVD player. Condensation may cause the DVD player to not operate properly. If you think that condensation is a problem turn off the DVD player for an hour or so to allow the DVD player to dry out and wipe any damp discs with a soft cloth to remove the moisture.

Road shocks may interrupt disc playback.

DVD Player and care

Precau

tion

s

4

MP3MP3

MP3 MP4

Right Wrong

CD-R/CD-RW discs

When CD-R/CD-RW discs are used, playback is possible only

for discs which have been finalized.

It may not be possible to play back CD-R/CD-RW discs recorded

on a music CD recorder or a personal computer because of disc

characteristics, scratches or dirt on the disc, or dirt,

condensation, etc, on the lens of this unit.

Playback of discs recorded on a personal computer may not be

possible depending on the application settings and the

environment, Please record with the correct format.(For details,

contact the manufacturer of the application.)

Playback of CD-R/CD-RW discs may become impossible in case

of direct exposure to sunlight, high temperatures, or the storage

conditions in the car.

Titles and other text information recorded on a CD-R/CD-RW

disc may not be displayed by this unit. (In the case of audio

data(CD-DA)).

If you insert a CD-RW disc into this unit, time to playback will

be longer than when you insert a conventional CD or CD-R disc.

Read the precautions with CD-R/CD-RW discs before using them.

DVD discs

With some DVD video discs , i t may not be possible

to use cer ta in funct ions.

I t may not be possible to play back some DVD

video discs .

DVD: Digital Versati le Disc

A type of disc which contains recording of

audio/video packaged media with high video and

audio qual i ty, such as a movie, featur ing large

recording capaci ty and digi ta l s ignal proceeding

capabi l i ty .

Top menu/menu(DVD)

Some DVD discs display more than one t i t le in a

screen. This screen is referred to as the t i t le menu.

The DVD menu is the i tem display (menu screen) for

use in set t ing operat ions. The DVD menu can be

recal led any t ime during playback to perform set t ings

according to the current sof tware, including the audio

switching between Dolby digi ta l and PCM, switching

of language used in the subt i t les and spoken voice.

While using DVD-R/DVD-RW discs , only video f i les

can be played, normal computer f i les cannot be played.

When DVD-R/DVD-RW discs are used, playback is

possible only for discs which has been recorded with

the Video format (video mode) . I t i s not possible to

play back DVD-RW discs which have been recorded

with the Video Recording format (VR mode) .

Precau

tion

s

5

I t may not be possible to play back DVD-R/DVD-RW

discs which have been recorded with the Video format

(video mode) , because of disc character is t ics , scratches

or dir t on the disc , or dir t , condensat ion, e tc . on the lens

of this uni t .

Playback of discs recorded on a personal computer may

not be possible depending on the appl icat ion set t ings and

the environment . Please record with the correct format .

6

MP3

MP3 is the abbreviation of MPEG audio layer3, which is

the standard of audio compression technology.

MP3 files on CD-ROM CD-R and CD-RW can be played

in this machine.

Disks compatible with ISO9660 level 1 and 2, or with

ROMEO and JOLIET system can also be played.

Recorded disks with multi sections can be played.

MP3 files are incompatible with the transporting of read-

in data.

The max char width of the file name (including the

extending name .mp3) is 32 (counting from the first char).

The max char width of the folder name is 32.

If the file is recorded through ROMEO and JOLIET

system, only the former 32 char are displayed. While playing

disks with MP3 and CD-DA, such as CD-EXTRA and

MIXED-MODE CD, the system can only switch between

MP3 and CD-DA.

The selected folder sequence of playing and other

operations will be the sequence to write in the software. So

the anticipated sequence of playing should not conflict with

the actual playing sequence. However, there are indeed

some software in which playing sequence is allowed to set.

The file is compatible with Id3 Label version 1.0 and 1.1,

so as to display the music titles and authors. The enhancing

function is valid only when playing MP3 in 32,44.1 and 48

KHz. Sample frequencies 16, 22, 05, 24, 32, 44.1, 48KHz

can be played.

The tone of MP3 file can usually be bettered when the bit

rate is increased. This machine can play recordings

between 8KBPS and 320KBPS. But in order to enjoy good

tone, we recommend disks over 128KBPS.

IMPORTANT:

While naming an MP3 file, add relevant extending name

.mp3.

This machine will play files with .mp3 as Mp3. Do not use

this extending name on non-mp3 files so as to avoid noises

and other problems.

Precau

tion

s

unit

1 rocate for volume adjustment

Press in AUDIO for sound control.

2 source

The system ON by selecting a source. Press

to cycle through all of the available sources.

Press the button for 2s to OFF the system.

3 reset button

Press this button can return to

4 mute button

Press this button to select MUTE or NOT

MUTE.

5 8 channel adjustment

6 DVD eject button

Press to eject a disc from the unit.

7 DVD disc direction

When the light is blue , it means disc in

it . If turn red , means no disc .

9 play button

Put disc in and press this button to play DVD.

10 IRRX Window

Never cover this window, avoiding the

malfunction of remote operations.

the original

setup

Under DVD estate press this button to change

the songs. Under CDC estate press this button

to change disc. Under TV estate to change

channel. Under RADIO to change frequence.

Key Functions

Touch panel key

1 SRC source

2 MENU video control

3 DISP funtion

4 MODE:picture mode

5 AUDIO sound menu

6 EQ audio mode

7 VOL - volume adjustment (-)

8 VOL + volume adjustment (+)

9 ANG 10 ANG :

LCD angle adjustment

Touch pannel

11 main menu

Press to control functions.

12 joystick

Move to do manual seek tuning, forward

,backward and track searching control, also

used for controlling functions.

13 14 Angle +/- button

press to change the LCD panel angle.

15

16 (power

Press to take back the monitor. When in

indicate press the button to open the LCD panel.

17 band

press to select the band(FM1 FM2 AM ),

press the button for 2s to automatic seeking

AS .

18 auxiliary input

press to select AUX or CAMERA input.

19

NAVI navigation video frequency button

EQ frequency mode

Press this button to select multi-equilibria

mode: Standard\Jazz\Rock\POP.PLAYPLAY

AUXAUX

EQEQ

ANGLEANGLE

SRCSRC

MUTEMUTE

OPENOPEN

BANDBAND

13

14

15

11 55 9922 6633 44 87 11111010 1212

ANGLEANGLE

NAVINAVI

7 INCH WIDE DISPLAY/DVD PLAYER7 INCH WIDE DISPLAY/DVD PLAYER

PLAYPLAYSRCSRC MUTEMUTE

MOSFET50W¡Á4MOSFET50W¡Á4UNIVERSAL SERIAL BUSUNIVERSAL SERIAL BUSUSBUSB

SRC

MODE

EQ

DISP ANG

ANG

1616 1717 1818 1919



OPENOPEN BANDBAND AUXAUX EQEQLINE1LINE1 LINE2LINE2

11 22 33 44 55 66 88 99 101077

Key fu

nctio

ns

7

NAVINAVI

1 /

2 OPEN

3

4 DVD eject key

5

6

7

8 MUTE

9 -

10

ANGLE button

Press this button to change the angle of the LCD panel.

button

When LCD is working ,press this to take back the LCD. When awaiting

an opportunity ,press this button to flip out the LCD.

CAP button

Press this button can change the caption and show the language.(It will

be valid except under the DVD state and the disc support this function.)

Press this button then you can put in the disc or take out the disc.

Play /Pause button

After putting in the disc , press this button to start play, press it for 2s to

pause.

Under DVD estate press this button to change the songs. Under CDC

estate press this button to change disc. Under TV estate to change

channel. Under RADIO to change frequence.

NAVI navigation video frequency button

button

Press this to select MUTE or NOT MUTE

Volume button

Sound button

Touch this button to display the volume menu, you can select BASS,

TREBLE, left or right balance.

EQ frequency mode button

Press this button to select multi-equilibria mode:

Standard Jazz Rock\POP

Remoter funtions

8

Key fu

nctio

ns

remote controller

AS 0FFDISC

3

2 MODE

3

1 2 3 MODE

1 2 3 MODE

2 3 MODE

1

1

1

1 2 3 MODE

1 2 3 MODE

1 2 3 MODE

1 MODE

21 3

4 5 6

7 8 90

SRC

AUX

-

+

MUTE

EQ

MENU

2 3+

CAP AUD

BAND

DVD

NAVI

OPEN -

GO

Angle adjustment

Monitor control

Caption

DVD eject

Play/pause

Channel

Navi video

Mute

Volume

Sound

EQ

DVD GOTO MENU

NUMBER 0(10+)

20

21

17

18

19

SECTION

Number

Source

Audio language

FM/AM(auto search)

DVD

AUX/CAMERA

MAIN MENU

CONFIRM

GO button

Number button 0

Press this button for a few seconds as the function of 10+ .

SRC play source button

Press this button repeatedly to switch the function between DVD

,CDC , BAND , AUX, TV and MP3.Within 2s , if without operation,

then it will automatically go to the function which glitter on the

screen .Press this button for 2seconds to off the item.

AUD Frequency /Language button

Press this button to select the language. (It' s will be valid except

under the DVD estate and the disc support this function.)

DVD button

Press this button ,then the function change to DVD.

BAND button

Press this button shortly to choose the frequence .Press it for few

seconds to search FM automatically.

AUX button

Press this button repeatedly to switch the AUX and CAMERA.

MENU button

Direction select button

Confirm button

Under the DVD estate ,this button as the function of confirm.

Under the TV/RADIO estate, this button as the function of memory.Number button

Press this button, input number or joystick and press confirm key, the

program will switched to relevant position

Key fu

nctio

ns

9

remote controller

AS 0FFDISC

3

2 MODE

3

1 2 3 MODE

1 2 3 MODE

2 3 MODE

1

1

1

1 2 3 MODE

1 2 3 MODE

1 2 3 MODE

1 MODE

21 3

4 5 6

7 8 90

SRC

AUX

-

+

MUTE

EQ

MENU

2 3+

CAP AUD

BAND

DVD

NAVI

OPEN -

GO

Angle adjustment

Monitor control

Caption

DVD eject

Play/pause

Channel

Navi video

Mute

Volume

Sound

EQ

DVD GOTO MENU

NUMBER 0(10+)

20

21

17

18

19

SECTION

Number

Source

Audio language

FM/AM(auto search)

DVD

AUX/CAMERA

MAIN MENU

CONFIRM

Select Sources

Press repeatedly it will switch recycle the

Signals show in the pictures.

POWER ON/OFF

MODESRC

MODESRC

MODEOPEN

Basic Operation

DVDDVD

A

A

A

B

B

B

DVD CDC BAND AUX

TVMP3EXITOFF

Press for one time to open the system

Press for 2s to close the system

Press for one time to extend the LCD monitor

Press for 2s to take back the LCD monitor.

NOTE:

Please don't let the pictures immovable, otherwise

there will be some shadow leave on the screen.

After the power electrifying ,the pictures appears

dark or dim, please wait for few minutes ,it will go

normally later.

You can enjoy the perfect sound effect under the

case of take back the LCD monitor or extend the LCD

monitor, there is no need to power off the power.

NOTE: When the car is driving, there will be a warning.

SRCSRC

SRCSRC

OPENOPEN

A B the remote control operationthe panel operation

Basic O

pera

tion

s

MENU SETTING

Press shortly or touch the MENU section on the screen There will show a system menu

The system menu include six page each item of the menu can be touched and selected freely.

XX

mm

mm

User

Softness

Normal

Brightness33

Last page

System

Display mode

Sound mode

Touch to select

XX

Bright

Contrast

Color

Hue

12

20

21

16

Video

Audio

Function

N e x t pa ge

Exit

Touch to select

Ajustment


MENUBA

Page one :Video frequency setting

Press shortly or Touch the MENU section There will be a menu for Video frequency setting

MENUB

XX

Bright

Contrast

Color

Hue

12

20

21

16

XX

The adjust range is from 0 to 40, it's depends on your habit to

setup the data .

XX

Bass

Treble

Balance

Fader

23

20

00

R01

Press it twice ortouch the AUDIO range on the touch screen ,Then will show you the Audio frequency setup menu. B MENU

Basic O

pera

tion

s

It's depends on your habit to setup the data.

Page two Audio frequency setting

MENUBPress this button for five times, or touch the screen the MODE range ,Then will appear the pictures mode setup menu.

XX

mm

mm

User

Softness

Normal

Brightness33

XX

mm

mm

Clock. 13:06:05

Date.....00.00.0D

Week.........sw.7

Reset.........YES

Press for four times

or touch the NEXT PAGE on the screen

Then appears the System setup menu

B MENU

If RESET is selected, all memory data will turn back to

the ex-factory set values.

MENUBPress the button for six times or touch the screen the EQ range .Then will appear the Audio mode setup menu.

XX

mm

mm

33

22

Audio mode setup

ENTER

XX

MENUTITLE

SETUP RNDM

Last/nest page

Press for three times or touch screen the DISP range Then appears the function operation interface

Function setup different source the display is different)

B MENU


Basic O

pera

tion

s

Image mode setup

Function setup

System setup

Resume the original setup

Because of the complexity on the circuit, this product may

disturbed and cause confusion, working abnormally, beyond

the control, or some unusual information display on the

screen ,if your product has the above phenomenon please

follow the instruction to operate.

1.Please confirm the ignition switch if power off.

2.Using a top object to press the RESET replace the product..

NOTICE

If RESET is selected , all memory data will deleted,

please re-adjust.

When the LCD monitor is expend ,after press the

RESET ,the LCD monitor will take back automatically.

MUTE

Press shortly

Change the MUTE between

NOT MUTE

Volume button

Revolve: clockwise/anticlockwise

Press

Touch screen Using your finger touch the VOL+/VOL-

To change the volume

B1

1-

+

A

MUTEA B MUTEA B




11 22 33 44 55 66 88 99 101077

MUTEMUTE


Basic O

pera

tion

s




11 22 33 44 55 66 88 99 101077

Play ing DVD

press

,the

machine will convert to DVD mode, relevant information

will be displayed and disks are ejected automatically.

After appearance DVD menu ,press PLAY button ,the

product will play the disc automatically. If you want to take

out the disc, please

Under every estate ,as long as insert a disc ,the item can

change to DVD automatically

Under every estate ,as long as press

1

DV

D P

layin

g

NOTICE:

The DVD player plays one standard 12cm or 8cm

(single)disc at a time . Do not use other adapter when playing

8cm disc.

Do not insert anything other than a disc into the disc

loading slot.

If you can not insert a disc completely or if after you

insert a disc but doesn't work , please check that the label

side of the disc is up. Press the EJECT button to eject the disc ,

and check the disc whether have damaged or not, then insert

the disc again.

MODESRCA B

Press the SRC for one time insert a disc into the disc loading slot directly.Touch the SRC range on the touch screen to choose DVD playing function.

1

SRCSRC

1

If you would like to go on playing the disc at the same point,

press again.

2

DVD Play and Pause

Touch the or ENTER to play disc .Touch the button to

pause play.

Forward and backward

Under the state of DVD playing ,touch to perform

the forward and backward function, press continues

,the playing speed switch between

and normal speed, press resume normal playing speed.

3 Playing mode

Touch RNDM select the playing mode.

RANDOM

ach playing, the order is different.

Play back chapters/titles in a random order

within the repeat range. E

2X 4X 8X16X32X

4 DVD SETUP

Touch SETUP range to enter the DVD setup.

5 DVD TITLE

Touch TITLE, return to the DVD title .

Some discs include many titles EX, one disc may have

four miles. Any mile have a titles.(Every title be divided to

may chapter).

Some discs only have one title.

6 DVD playing MENU

Touch MENU return to the DVD main menu base playing

list to select , press / to confirm play .PLAYENTER

Touch the DISP range on the touch screen, it display like

following :

Play mode

Confirm

Main menu

DVD setup

Title menu

Adjustment

Pause

Play

Stop

Forward

backward

Previous/next

ENTER

XX

MENUTITLE

SETUP RNDM DV

D P

layin

g

1

2

Touch GOTO to enter DVD menu, then detailed

operations can be seen.

PBC: When PBC is on the status of off , the track

can be selected from the figure buttons. When PBC is on the

status of on , the figure buttons are null while the device

is in progress. To return to the main menu, press PBC . To

select the track, operate on the main menu directly. (VCD

disc is effective)

Disc information track information

audio mode shift

zoom functionsubtitles shift

repeat mode

AUDIO ZOOM

XX

CAPTION REPEAT

DISP INFO

repeat: touch the button of REPEAT to choose

chapter, title. Also the whole disc can be repeated.

zoom: touch the button of ZOOM . The displaying

rate can be 1X, 2X, 3X.

DV

D P

layin

g

XX

PBC 4 5 6 7

ENTER 10+ 8 9

GOTO 0 1 2 3

Title

Chapter

Sound

Subtitle

Angle

Functions- optional ways

To display present title number and the total amount. Any wanted title can be selected as you like.

To display present chapter number and the total amount. Any wanted chapter can be selected as you like.

To display present audio language and the digital audio output. Any other audio language and the digital audio output can be transferred to as you like.

To display present subtitle language. Any other subtitle language can be transferred to as you like.

To display present angle. Any other angle can be transferred to as you like.

The figure buttons are for entering; the buttons of ENT/OK are for c o n f i r m a t i o n .

The buttons of the left and right sides are for selection; the buttons of ENT/OK are for confirmation.

Menu-

Title time

To display present title time. Any wanted title time can be selected as you like.

The buttons of the left and right sides are for selection; the figure buttons are for entering; the buttons of ENT/OK are for confirmation.

He buttons of the left and right sides are for selection; the figure buttons are for entering; the buttons of ENT/OK are for confirmation.



Chapter time

To select the mode of repeating: title, chapter, track, and so on. Or turn it off to ignore this selection.


The figure buttons are for entering; the buttons of

ENT/OK are for confirmation.

To select it, then the present title/chapter operating time or the time to be left can both be displayed. Or turn it off to ignore this selection.

Repeat

T i m e display

The figure buttons are for entering; the buttons of ENT/OK are for confirmation.

GOTO advanced operations

To display present Chapter time. Any wanted Chapter time can be selected as you like.

Functions Optional waysMenu

DV

D P

layin

g

TV setting

Angle mark, subtitles hiding, preceding setting memory

There are two choices, on and off, for these three settings.Remarks: If there is the selected subtitles in the DVD disc, the subtitles will be displayed in the selected language while the disc is on program. If there is no selected subtitles be recorded, then the language will be displayed as the disc has been set.Language Displaying

Touch the button of for shifting Chinese and English. Then press for confirmation.

DVD SETUP

Touch the button of on the DVD menu, then you can make all the sets of DVD operations. The buttons on the remote control, on the device, have the same functions as the touch buttons of DVD menus have.

The original setting which has been fixed at factory be kept is our advice.

Different mechanism can make out different menus.

The buttons of the left and right sides are for selection of setting type.The buttons of the upper and down sides are for selection of the setting program.The button on the right side is for entering the selection.After selection, press the button of ENT/OKTo quit from the preceding setting, press the left button.To quit from DVD setting, press the X on the upper-right side.

General Settings

General Setup Page

TV Display Normal Normal/PS

Angle Mark On Normal/LB

OSD Lang English Wide

Captions Off Wide Squeeze

Last memory On

General Setup Page

TV Display Normal Normal/PS

Angle Mark On Normal/LB

OSD Lang English Wide

Captions Off Wide Squeeze

Last memory On

General Setup Page

TV Display Normal

Angle Mark On

OSD Lang English English

Captions Off

Last memory On

General Setup Page

TV Display Normal

Angle Mark On

OSD Lang English English

Captions Off

Last memory On

DV

D S

ET

UP

--SPDIF Setup Page--

SPDIF Output PCM SPDIF Off

LPCM Output 48K SPDIF RAW

SPDIF/PCM

Audio SettingThere are eight types of audio setting as below:Loudspeaker setting, SPDIF setting, Dolby Digital Setting, Delay setting, equalizer setting, 3D setting, (HDCD), Karaoke Setting.

This unit does not have the function of Karaoke. So please

don't set Karaoke menu.

For speaker setting, there are also eight types as below:

Speaker Setup Page

Downmix STR LT/RT

Front Speaker LRG Stereo

Center Speaker SML V SURR

Rear Speaker SML Off

Sub Woofer On

Test Tone Off

Dialog 15

Post DRC Auto

Speaker Setup Page

Downmix STR LT/RT

Front Speaker LRG Stereo

Center Speaker SML V SURR

Rear Speaker SML Off

Sub Woofer On

Test Tone Off

Dialog 15

Post DRC Auto

LT/RT Select this item when a disc with 5.1 channel signal is played. The 5.1 channel signal can be decoded by the decoding system of the unit, then it will be put out via two channels, L, R.

DV

D

Dialogue volume

Front loudspeaker selections: High, Low

rear loudspeaker selections: High, Low

Tweeter selections: High, Low

Bass selections: On, Off

Tone Testing: Off

Output trend compression: Automatic

--SPDIF Setup Page--

SPDIF Output PCM

LPCM Output 48K 48K

96K

Speaker setup Page

Downmix STR

Front Speaker LRG

Center Speaker SML

Rear Speaker SML

Sub Wooferr On

Test Tone Off

Dialog 15

Post DRC Auto

Speaker setup Page

Downmix STR

Front Speaker LRG

Center Speaker SML

Rear Speaker SML

Sub Wooferr On

Test Tone Off

Dialog 15

Post DRC Auto

DOWNM1 mode SPDIF Setting

When SPDIF is on, the optical fiber has output.

Dolby Digital setting Delay Setting Page

Equalizer setting page

Equalizer type

--Dolby Digital Setup--

Dual Mono STR Stereo

Dynamic L-Mono R-Mono Mix-Mono

0cmSRCSRC

Audio Setup Page

Spearker Setup

SPDIF Setup

Dolby Digital Setup

Channel Delay

Equalizer

3D Processing

(HDCD)

Karaoke Setup

Audio Setup Page

Spearker Setup

SPDIF Setup

Dolby Digital Setup

Channel Delay

Equalizer

3D Processing

(HDCD)

Karaoke Setup

EQualizer Setup Page

EQ Type None None

Bass Type On Rock

Super Bass On POP

Treble Boost On Live

Dance

Techno

Classic

Soft

Dual Mono To set the output mode of the left and right signal.Mixed: Only effective if the DVD disc have 5.1 channel.S t e r e o : A u d i o o ut p u t f o r o r d i n a r y s t e r e o si g n a l .

Dynamic range compression: Adjust linearity compressed rate to get different compression effect from different signal. In daylight, the dynamic range, also called active range, is wide. You can adjust the linearity compressed rate to the most proper position to play the disc. At night, the dynamic range is narrow. You can adjust the linearity compressed rate to the minimum so other people won't be disturbed also the displaying effect won't be infected either.

---------

- FULL

-- 3/4

-- 1/2

-- 1/4

-- OFF

--Dolby Digital Setup--

Dual Mono STR

Dynamic

DV

D S

ET

UP

Bass on/off

super bass on/off

Treble boost on/off

3D Processing

Pro logic II Setup On On

Roverb Mode Off Off

3D Processing

Pro logic II Setup On

Roverb Mode Off Off

Concer

Living Room

Hall

Bath Room

Cave

Arend

Church

HDCD Setup Page

filter Off Off

1X

2X

Video Quality Setup Page

Sharpness MID High

Brigtness 00 Midium

Contrast 00 Low

Gamma None None

Hue 00

Satuation 00

Luma Delay 0T

Video Setup Page

Component Off

Quality

Off

YUV

RGB

DV

D S

ET

UP

3D process

GOMMO Adjusting

Image setting Acumination

Video Setting

Assorted video


Sharpness MID

Brigtness 00

Contrast 00

Gamma None High

Hue 00 Midium

Satuation 00 Low

Luma Delay 0T None

Brightness, contrast, tone, saturation While operating the

four functions, press the right button, then the pages as

below will be displayed, choose by touch buttons. To quit,

press the button of OK .

PBC:

TV tuner system

The AV system supports PAL and NTSC. So NTSC is advised

for DVD output.

There are two settings for PBC, on and off. Only

effective for VCD.

Remarks: If there is the selected audio and subtitles in the

DVD disc, the audio and subtitles will be displayed in the

selected language while the disc is on program. If there is no

selected audio or subtitles be recorded, then the audio and

language will be displayed as the disc has been set.

Perference Page

TV Type PAL PAL

PBC On Multi

Audio English NTSC

Subtitle English

Disc Menu English

Paretal

Country region USA

Default

Incipient Setting(this can only be set when the disc in not in or the DVD functions are not in progress)

Perference Page

TV Type PAL English

PBC ON French

Audio English Spanish

Subtitle Chinese

Disc Menu Japanese

Paretal Korean

Country region Russian

Default Thai

Others


Sharpness MID

Brigtness 00

Contrast 00

Gamma None

Hue 00

Satuation 00

Luma Delay 0T OT

Brightness delay

DV

D S

ET

UP

+1

+1

+1Hue

+1Satuation

Brigtness

Contrast

Country/Region: When your DVD disc is fine but can't be

played and other discs can be played properly, maybe the

reason is that the disc you played is not in your region. Please

consult all the related information of disc.

Default: to recover the reference setup. When you mis-set

leading defective working of DVD playing, please use this for

adjusting. If you choose this item, the OSD language of this

DVD will be English and the TV tuner system will be NTSC.

Age control

While playing a disc which has the lock function, please

select the proper age control level according to the disc

level and your real need.

E.g. : Level PG, then all the discs which are above PG can't

be played.

Perference Page

TV Type PAL 1.Kid SAF

PBC On 2.G

Audio English 3.PG

Subtitle English 4.PG-13

Disc Menu English 5.PGR

Paretal 6.R

Country region USA 7.NC-17

Default 8.ADULT

Perference Page

TV Type PAL China

PBC On France

Audio English HongKong

Subtitle English Japan

Disc Menu English Taiwan

Paretal GBR

Country region USA USA

Default

DV

D S

ET

UP

Country/Region

QuitChoose X, then press the touch button of OK, then quit from

the setup.

Press SET to quit from setup.

Password Setup

Password Setup Page

Password Mode On On

Password Off

Password setup:

On: Password is effect ive. The age control is nul l and can ' t be chosen.

Off : password is locked and reference setup can be made.

Password Setup Page

Password Mode On

Password Change

Old Password

New Password

Conform PWD

OK

DV

D S

ET

UP

manual changing disc

Press , to play any disc as you want. Touch the

figure buttons on the screen (or press the figure buttons on

the remote control), to choose the proper disc. If there is no

related number, please choose the next one.

automatical changing disc

After one disc is finished, the program will shift to the

next automatically.

CDC playing( compatible with Panasonic VCD changer)

When the disc is chosen, playing mode will be formed automatically. When the menu is displayed, press the touch region of DISP. Then you can see below:

CD

C P

layin

g

Remarks: When the CD changer is ready to work, there will display READY; When the CD changer can't work properly, there will display ERROR; If the disc container is out of connection, there will display NO MAG; If the disc container is in the CD changer, but without disc in, there will display NO DISC; If no auto playing after changing disc, please press PLAY or ENTER.

3 3

MODESRCB Press it for two times or touch the SRC region to choose CDC playing.

Play

XX

00 1 2 3

4 5 6

7 8 9

D i s c information

Track select

Fast/back

disc choosing

A SRCSRC

1

2 I

3

4

5

The switch of AUDIO and CAPTION is available only when the

SHIFT OFF .

f the disc itself has the language which is required to play, then the

device will play the language which the disc itself includes.

If the selected language has not transcribed in the disc, then it will

show the appointed caption language in the disc.

Repeat: can select chapter, title, or repeat playing from the beginning

Different set up caused different operation, please refer the DVD

changer manual in details.

Touch MENU to return to DVD MEMU, as per this menu, select

functions by touching the direction key in the screen or moving

the joystick in the unit, press / to confirm playing.PLAYENTER

1

2

Touch GOTO to enter DVD menu interface, please see the operation

details in the GOTO menu.

ANGLE is to select angle, for those DVD discs which include many

different angle of shooting scene can be played and watched from

different angle. For example, when the disc are playing the scene that a

train move forward, the screen can be showed the scene you can see from

the train front, left and right window, and the train still move forward.

CDC playing to control DVD CHANGER

MODESRCA B

CLEAR 4 5 6 7

XX

ENTER ANGLE 8 9

GOTO 0 1 2 3DVD goto

Clear selction

Confirm

Angle selection

Disc selection

Last page Next page

ENTER

XX

MENUTITLE

SETUP DISC Disc control

Confirm

Main menu

DVD Setup

Title menu

Selection

Last/next

Forward

backward

Play/pause

Pause

Press SRC button two times or touch SRC in the touch screen to select the CDC playingSRCSRC

CD

C P

layin

g

AUDIO SHIFT

XX

CAPTION REPEAT

DISP INFODisc informationTrack

Audio mode

Caption Repeat Mode

Information

Touch DISP range on the touch screen, it display as follows:

Advanced operationManual research

Press menu control key for two seconds in the remote control( or touch the Semiautomatic search area in the screen), the machine will automatically search from current frequency until a TV channel is found and the actual frequency can be shown at present.

Fully automatic searchTouch screen ASM area, the machine will begin searching for

channels from the frequency of 87MHz until the memory unit is filled (twenty channels)or the highest frequency of 108MHz is arrived.

Manual storageWhen the optimum frequency is finely tuned to, the

displayed image will begin to flash, choose the storage location By , and use remote control to storage present frequency at the chosen channel.

Touch current frequency directly, the current frequency

will get glittering and become red color, choose the storage

location by touching it and touch the current frequency, then

the current frequency will stop glittering and memory.

1 Auto seeking mode, press every button to stop seeking.

you can store to 30channel, FM andFM1can store 10 channels respectively.

Automatic searching is only available for FM.Do not press another button or doing other operation when

the manual saving showing item getting glittering.

A

Brand Selectingpress repeatedly to select the bandtouch the current frequency area directly to change the

frequency: screen wave band will show in turn :

transfer memory broadcasting stationselect by digital key in remote controlsaving broadcasting station by touching the screen

directly

Fine Frequency

move the menu select key in remote control. touch the screen directly

FM1 FM2 AM

1 2

31

31

Fine Adjustment-

Fine Adjustment+Current BandCurrent Frequency

Automatic Seeking

Semi-automatic Seeking

Preset Channels Preset channels

RADIO

Rad

io Op

eration

MODESRCA BTouch SRC three times or Touch the SRC on the touch screen to select the band for radio

SRCSRC

4

5

Preset channels

Operate by remote control , buttons in the host

Or open the TV function menu in touch screen to

touch CH+ or CH- to select last channel or next channel.

When the channel number is the maximum one, the system

will change to the minimum channel. Input numbers to select

channel. If the first number is input and there is no further

input for 2s, the system will seek channel corresponding to

the first number.

Fine tuning

Touch -/+ or Move the joystick towards left and right on

the host or press menu select button on the remote

commander to fine tune the current channel.

TV system switch menu

Touch the system character directly, the system will switch

to TV system automatic.

dub system

PAL system contain PAL(DK I BG )dub tone function, and

for SECAM system is with SECAM DK BG dub tone

functions, those dub tone function is unavailable when it is

in NTSC system.

MODE

TV receiving

Press DISP function touching area in the monitor, there will be showing following operation interface:

1

2

Automatic research (TUNE)

Choose TUNE from touch screen, system will fine tuning from

VLF-VHF-UHF channel, and memory all founded channel

automatic, 100 channel can be memory, press any key or touch any

available position in the touch screen can exit form researching.

Precautions

At most 100 channels can be stored in this machine.

If the receiving effect is bad, check the connection of

antenna.

If the bad effect is caused by weak signal or high-speed

driving, it does not means something is wrong with this machine.

XX

TUNE MEN

CH - +

DK I B G

0 1

2 3 4 5

6 7 8 9

TV

Op

eration

press SRC five times or touch SRC area in the screen select TVto watching TV

MODESRCA BSRCSRC

XX

1 PAL

2 NTSC

3 SECAM

MP3 playing

Touch screen selecting also convenience for the following operation

MP

3 PL

AY

ING

MODESRC

A Bpress six times or touch SRC in touch screen area to select MP3 playing.

,the right display red A-B,and it

play between 02:05-04:05. Press to cancel the

repeat , the it play from the first file.

Digital repeat function: for example the current songs

playing to the time 02:05, press to begin record,

and continue to play until 04:05 then press to

finish. Press

Songs select: touch number key to select songs and press confirm key, for example: if you want to enter in 0006, touch 0-0-0-6 and confirm, the songs will switch to the six song and play.

Attention: when the machine can not recognize the file in USB, please try to touch the DISP function area in the left-up corner and select USB RESET to reset.

Last /next folder

Last/next file

DVD

DVD

e v e r y s o n g s c a n

a n d p l a y t h e

f i r s t 6 s e c o n d s Repeat mode

Play mode

Last pageDigital repeat function

Exit

Confirm

Clear

0006000611

66

22

77

33

88

44

99

55

00 C C XX

13:05

SRCSRC

13 2813 28

DVD

DVD

GO

Volume

Current folder

The total folder

Current file The total files

Play time

Current time

Play

Stop Pause ForwardBackward

Next page

Goto

USB information

when no USB including the screen will show NO DISC

when there is no MP3 file show NO FILE

when the is stop will show STOPdisc

ConnectionC

on

nectio

ns

Blown

P.CONT

Power control ,connect to the power amplifier control switch.

Disc

Disc AV

CD/DVD C

CD/DVD AV

Black

WhiteWhite

YellowYellow

RedRed

Optics output

CD/VCD/DVD changer

IP-BUS totale line

Black

Black

Black

Black

Red

White

Yellow

AUX INTV ANT

TV antenna

AV system auxiliary Supply oscillator




11 22 33 44 55 66 88 99 101077

orange antenna control ANT.CONT

USB

MUTE

NAVI

Radio ant

CAMERA

Black

Blue

Black

Black

Yellow

RADIO CABLE(supplied)

Vehicle telephone

GPS

Camera

MP3

REAR L

White

White

Red

Red

White

Red

Yellow

VIDEO OUT

SWF R

SWF L

REAR R

FRONT R

FRONT L

AV OUT

Puple/black

Puple

Gray/black

Gray

White/black

White

Green/black

Green

REAR L REAR R

FRONT RFRONT L

Yellow BATT

Black GND

Blue/black backing control

Orange/black Weaken light control£¬connect to the dash light switch.

Red to electric terminal controlled by ignition switch ON/OFF

Blue Backing signal control ,connect to the backup light.

GND

ACC

ILLUMI

PRK SW

BATT+

Dash light

Dash light switch

Parking brake switch

Backup light

Ground

Ground

Ignition switch

Ground

storage battery Ground

Tro

ub

lesho

otin

g

The disk cannot be played Replace it with a better one

Display parent locking can't be played Parent locking function is turned on Close this function or degrade its level

Can not switch languages or captions Current disk does not have multi-languages Cannot switch languages

You can only switch between items displayed Use disk menu to switch

No caption Current DVD disk does not have Unable to display caption

You can only switch between items displayed Use disk menu to switch

Does not play in the language and

caption set in DVD SETUP MENU

Current disk does not have the language or caption

set in DVD SETUP MENU Unable to play this way

Unable to switch the view angel Current disk does not have multi-angel scenesUnable to switch between different angels because

there is no such angels.

You try to switch between different angels, but thereis no recorded multi-angle scenes.

Use switch when the disk has multi-angel scenes

Bad turnoff, or the disk has been damaged.

Problems Possible reasons Measures (advices)

Malfunction Eliminating

The pictures are extremely

obscure, distorted and blurredThis machine is compatible with anti-copy system,

but there may be some parallel lines or other things

while playing, this does not mean a problem of this

machine.

The disk has anti-copy information.(some disks

have this function)

Malfunction Eliminating

Can't be switched on, unable to use the machine.

Incorrect connection of down-lead and linker. Make sure all connections are correct

Fuses meltedFind out the reason, and replace the fuse of the

same specifications

Noises or other factors make interior micro-processor unable to work well

Press RESET to restore the machine to its initial setup

Can't use remote controller. The

machine refuses to work even

the remote is correctly used.

Insufficient battery power. Some operations are prohibited in certain circumstances.

Insert new battery

Enter correct circumstances

Cannot be played

Disks are dirty Clean the disks

Disks used not suitable to this machine Check the disk types

The Video system of the disk incompatible to the machine.

Change another disk which is compatible to yourvideo system.

No sound Incorrect linking of cables Link the cables correctly.

The volume does not increase The machine is in MUTE state, or slow-motion or playing frame by frame In such kind of situations, no sound output.

Certain speaker cannot output sound

Incorrect setup of sound fields Setup sound fields correctly

No pictures, or display PIC OFF Hand-brake line not linked hand-brake not opened. Link hand-brake line, and open it.

When the power switch is turned to ON or ACC, the motor sound.

The machine checking the disk Normal function.

Tro

ub

lesho

otin

g

Problems Possible reasons Measures (advices)

Case inventory

Sequence Number

Name Quantity

Host

Remote Control

Host outer battle

Battery

1

5

2

3

4

Power Cable

Manual

Remark

One Set

Specifications subject to change without notice.

Sp

ecificatio

ns

SpecificationsPower source: 13.8V DC (10.8-14.5V lowable)Grouding system: negative typeUnit:Max current consumption: 15ADimensions(W*H*D): 197*177*50mmWeight 2.4kg

Display Screen size: 7 inchAspect ratio: 16:9Effective display area: 154*87mmPixels: 336,960(1,440*234)Type: TFT active matrixTV: CompatibleOperating temperature range: -20~+70Storage temperature rage: -30~+80Angle adjustment: 0~105

AudioMaximum power output 50W*4Load impedance 4 4-8 lowablePreout max output level/output impedance: 2.0V/200

FM tunerFrequency range: 87.5~108.0MHzUsable sensitivity: 10 dB(S/N:30 dB)AM tunerFrequency range 531~1629KHz(9KHz) 530~1710KHz(10KHz)Usable sensitivity 30 dB(S/N 20 dB)

TV tunerAntenna: four antenna inputsFrequency range: ~

sable sensitivity 30 dB49.75 863.25MHz

U

DVD playerSystem: DVD Audio, DVD Video, VCD, CD, DTS CD and MP3systemUsable discs: DVD Audio, DVD Video, VCD, CD, DTS CDNumber of channels: (stereo), digital 6 ch

Disc changerCDC changer

changer 6-disc DVD Changer, special connection)

(CDC/DVDC): DP88,VCD10,VCH1000

DVD : DVP-680 (

LM6501 User manual

Documents

Transcript of LM6501 User manual