LM Release - LM Products · 2016-06-09 · LM Release condi ons away from direct sunlight, under...
2
Transcript of LM Release - LM Products · 2016-06-09 · LM Release condi ons away from direct sunlight, under...
LM ReleaseHigh PerformanceFormwork Oil
LM Release is an extremely versale high specificaon chemicalrelease agent blended with highly acve surfactants.
The blend of highly acve surfactants assist in reducing surfacetension at the interface between the concrete and theformwork, ensuring that opmum release is aained henceachieving a high quality concrete surface finish.
Appearance Low viscosity light brown liquidSpecific Gravity @ 15.6c 0.87Flash Point (PMCC) 102°C (Minimum)Viscosity cSt @ 40°C 10.7Average Coverage 18—30 m² per LitreShelf Life (sealed container 12 months minimumPPour Point <-20°C
Product Descripon
Technical Data
Advantages
Produces uniform, stain-free concrete.Protects mber against moisture ingress, thus extending the lifeof the formwork.Is completely versale—can be used on mber, plywood, metaland plasc formwork.
Applicaon
Health & Safety
When working withLM Products suitableprotecve clothing, eye/faceprotecon and gloves shouldbe worn.
LM Release is supplied ready to use.A thin film should be applied to the formwork using low pressurespray equipment with care being taken to avoid over applicaon.For new and unsealed mber formwork pre-treatment isrecommended with a second applicaon prior to use - this willextend the useful life of the formwork and help with surfaceaabsorbency.
Packaging
Storage
LM Release should be stored under dry, frost-free condions away from direct sunlight.
Under these such condions the shelf life is at least twelve months.
LM Products is available in25 and 200 Litre Containers.IBC̀s available on request.Tanker pumpout on request.
LM Releasecondions away from directsunlight, under such condionsthe shelf life is at least twelvemonths, if unopened.
Once opened replace lidimmediately aer use and usewithin 2 within 2 weeksresearch and developmentprogramme the informaonrelang to each product hasnot been superseded.
Important Noce
Whilst all reasonable care istaken in compiling technicaldata on the Company’sproducts, all recommendaonsor suggesons regarding theuse of such products are madewithout guawithout guarantee, since thecondions of use are beyondthe control of the Company. Itis the responsibility of thecustomer to sasfy himself thateach product is fit for thepurpose for which he intends touse it, thuse it, that the actual condionsof use are suitable, and that inthe light of our connual.
For all Technical and Sales enquiries, please call us on: 0121 552 8622L M Products LtdUnit 10, Union Road, Oldbury, B69 3EXTel: 0121 5528622 Fax: 0121 5444571 e-mail: [email protected]
To the best of our knowledge and belief, this informaonis true and accurate, but as condions of use and any labourinvolved are beyond our control, the end user must sasfyhimself by prior tesng that the product is suitable for hisspecific applicaon, and no responsibility can be accepted,or any warranty given by our Representaves, Agents orDiDistributors.
Published: 14/04/2016
