LJ-TSV SERIES HORIZONTAL SCREENS

Terex® Minerals Processing SystemsCedarapids LJ-TSV

Form 25925 (1/13)

Medium scalping option (heavier top deck, side liner extensions, feed box and discharge lip)

Patent pending bottom deck deflector plates boost efficiencyReplaceable magnetic deck linersEnd-tension bottom deckFlat decks for modular mediaRigid I-beam base frameLeft-hand drive assembly and guard1500 rpm drive

5' (1524 mm) wire clamp barsRubber spring suspensionSpray system (nozzle or splash)Wire screen clothWedge tensioning for wire clothCylinder tray for bottom deckScreen-duty electric motor (1200 rpm or 1500 rpm)TOPS2.0 Terex Oil Purification System

ElJay® oval stroke with adjustable angle, stroke and speed25% thicker 5/16" (8 mm) grade 50 high strength steel side platesHeavy-duty fully braced single crown tubular steel deck constructionSpring mounts adjust for 0°, 2.5°, 5°, 7.5° or 10° slope installationsExclusive patented and patent-pending features for durability

and easy maintenance: •Lowmaintenancevibrationdampersystem •Replaceablescreenpanelseals •“Flow-through”bearinglubrication •Bafflesplashlubricationsystem •DoubleO-ringsealedforlifevibratorconstructionExtended life coil spring suspension Replaceable bolt-on spring guidesTool-less oil level check glasses

OPTIONAL EquIPMENT

STANdARd FEATuRESGland type non-wearing shaft sealBottomdeckfeedcurtain4' (1219 mm) clamp bars with spherical washer tensioning systemExtended life V-belt drive with sheaves for 1200 rpm motorEnclosed right-hand drive guard, motor mount, and tensionerAdjustable speed motor drive sheave and spring loaded belt

tension idlerSelf aligning two row spherical roller bearingsSynthetic broad range lubrication oilHand access holes with removable coversSpray pipe knock-outsShaft tube linersOil level sight glasses

Screen Slope

60 6477

99

130

020406080

100120

10°7.5°5°2.5°0°

Fee

t P

er M

inu

te

Maximum stroke .................................................................................3/4" (19 mm) (stroke can be reduced by removing weight plugs)Recommended speed range .................................................................675 - 875 rpmMaximum feed size, standard decks ................................................... 10" (254 mm)Maximum feed size, medium scalping decks ....................................14" (356 mm)Maximum drop of feed ...........................................................................18" (457 mm)

Feed box liners, standard (AR plate) .....................................................1/4" (6 mm)Feed box liners, medium scalping (AR plate) ..................................3/8" (9.5 mm)Discharge lip liner thickness (AR plate) ................................................1/4" (6 mm)Bearing size .........................................................................................................160 mmWire cloth length, standard .................................................................... 4' (1219 mm)Wire cloth length, optional .....................................................................5' (1524 mm)

Terex® Minerals Processing SystemsCedarapids LJ-TSV Series Horizontal Screens

SPECIFICATIONS

Effective Date: January 2013. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2013 Terex Corporation.

Terex® Minerals Processing Systems, 909 17th Street NE, Cedar Rapids, IA 52402 USATel +1 319 363 3511 Fax +1 319 399 4871 www.terexmps.com

www.terexmps.com

SPECIFICATIONS

Form 25925 (1/13)

F35.13"(892 mm)

W

B

E

CD

A

4" (100 mm)

H

26.5" (673 mm)

L

Screen Size 1200 rpmhp (kW)

*Weightlbs (kg)

Dimension in inches (mm) for Standard Coil Springs **Subtract 1.25" (32 mm) for Optional Rubber Springs

**H L W **A **B **C **D E F

0° LJ-TSV 6202-32 40 (30) 19,230 (8725) 60.03 (1525) 240 (6096) 76 (1930) 47.69 (1211) 6.5 (165) -- 34.77 (883) 12.34 (314) 87 (2210)

2.5° LJ-TSV 6202-32 40 (30) 19,230 (8725) 68.97 (1752) 240 (6096) 76 (1930) 44.54 (1131) 3 (76) -- 32.45 (824) 12.34 (314) 87 (2210)

0° LJ-TSV 6203-32 40 (30) 22,650 (10,275) 76.46 (1942) 240 (6096) 76 (1930) 64.12 (1629) 6.5 (165) 35 (886) 52 (1321) 12.34 (314) 87 (2210)

2.5° LJ-TSV 6203-32 40 (30) 22,650 (10,275) 85.14 (2163) 240 (6096) 76 (1930) 60.71 (1542) 3 (76) 32.33 (821) 48.43 (1230) 12.34 (314) 87 (2210)

Screen Slope

Maximum Media Opening

0° 3" (76 mm)

2.5° 3.5" (89 mm)

5° 4.5" (114 mm)

7.5° 6" (152 mm)

10° 6" (152 mm)

5° Wedge Part #T127567 7.5° Wedge Part #T127568 10° Wedge Part #T127569

5° 7.5° 10°

*Weights include base frame, motor mount, belt guard, motor and wire screen cloth.

0° Mount LJ-TSV (equivalent to an LJ-TSH)

2.5° Mount LJ-TSV (equivalent to an LJ-TSS or FSG)

Riser Beam Part #T1264852.5°

Material Travel Rate