LiteMinder - Evenlite Evenlite Inc. warrants the LC series Lead Calcium batteries for 10 years, 1...

2575 Metropolitan Drive, Trevose, PA 19053 USATEL: (800) 872 0879 • FAX:(215) 244 4208 • www.evenlite.com

Project name: Approved By:

Catalog No: Type No:

LiteMinderFast Transfer System

1.0, 2.2, 2.8, 3.0KVA

LM Series InverterPure Sine Wave Modular

Inverter Technology

ARRA Compliant for Levels 1&2

ModuLAr AC SySTeM

Evenlite’s LiteMinder Central Inverter System provides an innovative Emergency Lighting solution for today’s complex energy saving systems, light sources and maintenance requirements. The LiteMinder represents the pinnacle of engineering excellence with features not found in the traditional systems currently available:

• Modularity:LiteMinder features unique inverter modules available in increments of 1.0, 2.2, 2.8 & 3.0 KVA capacities. Modules are interconnected to build the required system capacity, provide redundancy and can even be field upgraded to increase system sizes ! Modules can be configured to provide Single Phase, Two Phase, Split Phase, and Three Phase outputs thereby eliminating costly, inefficient external transformers.

• ControlFeatures: A key pad and LCD display provides user interface and extensive status diagnostics. Self-test, Self-Diagnostics in compliance with UL 924 stores 1,000 Test, Event and Alarm logs thereby eliminating the need for costly manual test and data recording.

• WebSiteMonitoring: Unique web interface constantly monitors the system status and records all essential data. Users can log on, view, interact and download records as needed. The factory can also monitor, remote diagnose and install software upgrades.

• Diagnostics:In addition to Self-test, Self-Diagnostics, LiteMinder also includes unique startup diagnostics to aid in installation and maintenance: Eight individual startup alarms (Communications, Set-Up Conflict, Low Battery, Back-feed, Transfer/AC Fuse, Short/Overload, Miswire, Incorrect AC Input) in addition eight individual Charger Alarms and eight individual Inverter Alarms are included as standard.

2575 Metropolitan Drive • Trevose, PA 19053 USATel: (800) 872-0879 • Fax: (215) 244-4208www.evenlite.com

Lite-Minder Modular Fast Transfer Sine Wave Inverter

LM-MOD 11/16

orderING GuIde Basic NomenclatureLM

Model VARating PhaseConfiguration InputVoltage OutputVoltage OutputBreakerConfiguration Options

LM 1000 VA

2200 VA

2800 VA

3000 VA

1P Single Phase 120 or 277(L-N)

1S* Split Phase

2P* Two Phase

3P* Three Phase

* Split phase and two phase only available with 2.2KVA model, 3 KVA model must be three phase

IA 120V (L-N)

IB 277V (L-N)

IC 208V (L-L)

ID 240V (L-L)

IE 480V (L-L)

IF 120/208

IG 277/480

OA 120V (L-N)

OB 277V (L-N)

OC 208V (L-L)

OD 240V (L-L)

OE 480V (L-L)

OF 120/208

OG 277/480

*C(n)20A Normally On Output Breaker

*O(n)20A Normally Off Output Breaker

*S(n)20A Switched Output Breaker

BB Indicates Special Breaker Current Requirement, Contact Factory

(n) = number of Breakers

* Maximum Off or Switched = 4 Total * Maximum Normally On = 8 Total

*TATrip Alarm for all circuit breakersTB 1 Summary / 2 programmable terminal

block for form C dry contactsMB Maintenance Bypass Switch(make before

break)FSFactory Start Up, Extends Warranty to

2 years from startup date

M(n) Maintenance Plan, n= years (5 max.)EW 5 Year Extended Warranty-Requires factory

Startup

WM Wall Mount Kit (1KW only)DT Delayed Transfer (optimized for LED lighting

and non-HID Lights*Maximum Number of Breakers with Trip Alarms = 5

Example: LM-1000-1P-IA-OA-O1-FS

Warranty: (For full warranty details see warranty data sheet CPS-WAR)

electronics: Evenlite Inc. warrants the LM series electronics assembly (except batteries) against defects in material and workmanship for a period of one year, or two years with Factory Startup option, up to five year warranty availalable. Battery: Evenlite Inc. warrants the LC series Lead Calcium batteries for 10 years, 1 year full and 9 years pro-rated limited warranty.

• PWM MOSFET and IGBT (Model Dependant) Inverter provide Pure Sine Wave output with less than 3% THD, and is fully compatible with LED Lighting Loads

• Fast transfer for H.I.D. compatibility ensures smooth operation of combined lighting loads, transfers in less than 2 mS

• Modular inverter allows parallel operation for single phase or three phase operation

• Less than 3% THD, load power factor 0.5 Lag to 0.5 Lead, 98% efficient in standby mode

• Automatic Low Voltage Disconnect (LVD) set at 1.67 VPC

• Automatic restart upon utility power return, no need to manually reset the system

• UL924 compliant Self-Test/Self-Diagnostics are standard, with interactive LCD display

• Monthly and annual 90 minute tests can be programmed by the user for a specific date and time to ensure NFPA Code Compliance

• Up to 1000 events stored in the memory log on a “FIFO” basis, and are easily accessible through the MMI

• MMI (Man-Machine Interface) consists of a 5 button keypad for easy menu navigation

• A 4x20 backlit White display with heads-up LED’s allow for a quick diagnosis of the system status and alarms

• Dedicated System Test push button and Alarm Silence On/Off push button

• SD card slot allows the user to download all Test, Event and Alarm Logs

• Crest factor >4 for high inrush demanding loads, overload 120 percent for 10 minutes, 400 percent for 500mS

• VRLA Maintenance Free Lead Calcium Battery’s provide the required 90 minute minimum run time

• System operating temperature range 20° to 30° C

• Battery recharge time is less than 24 hours, meets all UL 924 and NFPA101 Life Safety Code requirements

• Three Rate Charger circuit is fully temperature compensated for added reliability

• Brownout protection set for 85% of the nominal line voltage

• NEMA Type 1 enclosure is 14 ga. CRS powder coat finished

• Electronics are warranted for 1 year and the VRLA batteries have a 10 year warranty, optional factory startup increases the electronics warranty to 2 years

• New York City Calendar Number 53870

• Listed to UL924, meets CSA C22-2 No. 141, NFPA101 Life Safety Code, NFPA70-NEC and OSHA Requirements


• C(n) is the designation for Normally On Output circuit breakers which feed circuits that must be energized at all times. The maximum number available is eight(five when used with the TA option) (n) = specify the number of breakers required

• O(n) is the designation for Normally Off output circuit breakers which feed circuits that are only required to be energized when the utility power fails. The maximum number available is four, (n) = specify the number of breakers required

• S(n) is the designation for Switched Output circuit breakers which feed circuits that are required to be switched by devices such as time clocks, relays, occupancy sensors (non-dimming controls). The maximum number available is four, (n) = specify the number of breakers required

OutputCircuitBreakerConfigurations

Options• TA - Trip Alarm for all circuit breakers. When a circuit breaker trips the TA emits an audible signal to notify the user

that the circuit breaker has tripped(maximum five trip alarms)

• TB - One summary and two programmable terminal block for form C dry contacts. This option allows the user the versatility of utilizing the programmable terminal blocks to monitor specific functions

• MB - is an internal make before break maintenance bypass switch that allows the user to power down the system in the event that any maintenance is required

• FS - Factory Startup, a factory trained technician will visit the site to inspect, test, and calibrate the system to ensure proper operation. Factory Startup extends the electronics warranty to two years from startup date

• EW - Extended Warranty requires Factory Startup and extends the electronics warranty to five years from the date of the startup

• WM - Wall Mounting Kit used with LM1000 only, allows the user to mount the inverter to struts or the wall using hardware (provided by others)

• DT - Delayed Transfer optimized for use with LED lighting and non-HID lights

UnitBTURatings

LM1000 70 BTU 98% Efficient in standby mode





LM-MOD 11/16

• Single Phase input allows for 120 or 277VAC input (two wire plus ground) and is available in 1.0, 2.2,and 2.8KVA models (input and output voltage must match)

• Two Phase input allows for 208 or 480VAC input (three wire plus ground) and is available in the 2.2KVA models only

• Split Phase allows for 240VAC input (three wire plus ground) and is available in 2.2KVA models only

• Three Phase allows for 120/208 or 277/480VAC input (four wire plus ground) and is available in 3.0KVA models only

PhaseConfigurations

Web Interface – Control Panel


LCDDisplay


LM-MOD 11/16

A key pad and LCD display provides user interface and extensive status diagnostics. Self-test, Self-Diagnostics in compliance with UL 924 and NFPA 101 Life Safety Code and stores 1,000 Test, Event, and Alarm logs thereby eliminating the need for costly manual testing. There are also USB and SD card slots which allow the user to download, print and save critical log information.

Website monitoring is provided at no cost to the user. The unique web interface constantly monitors the system status and records all essential data. Users can log on, view, interact and download records as needed. An email notification can be sent to notify the user if an event occurs. The information is updated every two seconds to ensure accurate information is always available for the user.

Cabinet detail

All enclosures are NEMA Type 1,14 gauge cold rolled steel with a powder coat finish

Page 2

Mounting Slot Detail

1.38.31 Dia. holes for1/4” hardwareFloor MountingBrackets andCabinet to Cabinet Vertical Mounting

.75 x 2.13Slot forFloor Mounting

AC Breaker Panel

24

4.0

38

Bracket, Floor Mounting

133 feet minimum clearancein front of all units

Man MachineInterface Panel

Master Inverter Cabinet

Floor Mounting Bolt Pattern

21.00

Mounting SlotSee Detail

Inter-cabinet Battery CablePorts for Vertical Mounting

9.97

1.51.5

21.6

30.3

Overall Mechanical Dimensions IKVA Single Cabinet

1.0KW requires one cabinet

Cabinet = 152 lbs.

Batteries = 156 lbs.

Total = 308 lbs.

Shipping Weight = 343 lbs.

70 BTU

98% Efficient in Standby Mode

Note: Shipping weight includes one pallet at 35 lbs.



LM-MOD 11/16



LM-MOD 11/16

Overall Mechanical Dimensions 2.2 - 3.OKVA

Horizontal (Side by Side)

Battery Cabinet mounted to the right side of Electronics Cabinet for proper battery cable routing from cabinet to cabinet

Vertical (Stacked)

Battery Cabinet mounted underneath Electronics Cabinet for proper battery cable routing from cabinet to cabinet

2.2KW requires two cabinets

Inverter Cabinet 180 lbs. .

Battery Cabinet = 108 lbs.


Total = 600 lbs.



BTU = 150


Inverter Cabinet 180 lbs.


Batteries 390 lbs.

Total = 678 lbs.



BTU = 190


Inverter Cabinet 235 lbs.



Total = 811 lbs.



BTU = 220

Note: Shipping weight includes one pallet at 35 lbs.


Cabinet detail All enclosures are NEMA Type 1, 14 gauge cold rolled steel with a powder coat finish

LiteMinder - Evenlite Evenlite Inc. warrants the LC series Lead Calcium batteries for 10 years, 1...

Documents

Transcript of LiteMinder - Evenlite Evenlite Inc. warrants the LC series Lead Calcium batteries for 10 years, 1...